Oh my goodness, I’m not sure I would have started this if I’d known how tricky it was going to be!
I was asked by a neighbour if I’d consider refashioning a leather jacket she had had for a good number of years. She had worn and loved it a lot back in the day but it was now relegated to the back of the wardrobe, she neither wanted to wear it because it was too big and dated, nor did she want to throw/give it away so what to do?
Although I’ve done other radical refashions in the last couple of years they have been for myself so the pressure wasn’t there like this one. You can read about those here, here and here. I made it clear, in the nicest possible way, that I had no guarantee of the quality of end result with a leather jacket, once sewn the stitch marks were there permanently, anything cut off couldn’t be reattached. So long as she understood that there was an outside possibility that it wouldn’t go well and was able to accept that then I was prepared to have a go. I haven’t sewn leather since I did it as a module at college many years ago.
We started by assessing what the jacket looked like as it was and we agreed it was much too large for her and it looked over-long now. The sleeves were too roomy as well, the zigzag detail at the neck and shoulders I could do nothing about so that would have to stay. Because you can’t pin leather I bought some quilting clips to do the job instead. I undid the lining and clipped the side seams and sleeves inside so we could assess in front of a mirror what the effect looked like. We decided pretty quickly that the over-large shoulders had to go too. Because we had to make each decision before moving on to the next Etain had to keep coming by, luckily she only lives over the road from me.
I was kindly given a specific ‘leather’ foot by Pfaff Uk for my Quilt Ambition 2.0 and I bought some leather needles too. The foot is made from Teflon (that’s right, like non-stick pans) because it glides over the surface of the leather rather than ’sticking’ to it. If you don’t want to buy a special foot you could attach masking tape to the underside of a regular foot although I must stress I haven’t tried this personally so I can’t vouch for its success. I also used some Stitch-and-Tear Vilene which I’d got knocking about to put under the leather if it was directly again the teeth of the feed-dog underneath [this prevents them from scuffing and chewing up the surface of the leather]
I’m not going to lie, even though I have a wonderful machine which doesn’t usually struggle with multiple thicknesses, and I had the correct tools for the job, I found this a very tricky refashion because the machine hated going over too many layers of leather. The needle sewed smoothly over two layers but as soon as I went over more than that the needle would ‘stick’ and then clunk back out of the leather with such loud bangs that it frightened the life out of me every single time! I resorted to winding the balance wheel by hand every time I had to sew over seams or darts so that I had some control over it. I also had to adjust the top tension a lot in order to get a reasonable stitch quality, added to which there wasn’t a decent colour-match for the shade of pink I needed in the stronger thread from Gutermann. It’s possible that another brand had something available but, bearing in mind the trouble I was having with multiple layers, I wanted to avoid visible top-stitching at all costs and I didn’t want to order threads that might not be a good match anyway.
Onwards! I must confess that I kept pushing the jacket down the list because I wasn’t enjoying it and there were other projects to complete which were preferable….
I took off the lower portion of the jacket at the midriff seam, put darts into the front and pulled in the centre back seam to give the jacket more shaping. The sleeves came in by quite a bit although, in the end, we retained the modest shoulder pads to give some structure. Unfortunately one of the side effects of bringing the sleeves in caused the shoulders to raise up slightly in wear but anchoring down the collar to make it appear narrower distracted from this to some extent.
To give the jacket some definition again at the bottom I took leather from the original lower section, made a much narrower band and reattached it to the bottom. This looked ok and by pressing this seam open I could fold the band up and stitch it through the seam allowance thus keeping it in position. I was also able to bag out the corners at the front thankfully, the last bit of reattaching of the new band to the button-stand had to be done by hand through the seam. It’s not completely invisible but it’s perfectly acceptable. I reattached the lining to the seam allowance of the new lower band, I was partly able to do this on the machine and then sewed up the remaining gap by hand.
I gave the fold of the band a good press, with a cloth over it naturally, to flatten it as much as possible. the final touch was to change the buttons for something newer than the slightly scuffed covered buttons of the original.
So there we have it, it was a challenge but Etain is happy with it and it looks a good deal more fashionable, at least for now! Leather isn’t difficult to sew as such but there are definitely challenges, I didn’t follow all the rules like glueing seams flat but when you’re dealing with an already-made garment some of those things go out of the window a bit. Please don’t think I’m now an expert in this field but if there’s anything you want to know about how I tackled things then do message me and I’ll try to answer. Meanwhile, I think I’ll find a simpler project next….
6 thoughts on “A leather jacket refashion”
I am so in awe. You have made a wonderful job of something so tricky. I have yet to attempt to make anything out of leather but your tips will be very useful if I do. Thanks for sharing 🙂
LikeLiked by 1 person
You’re very kind, and good luck if you attempt a leather project, I suggest you start with something small and simple!
A masterful remodeling! Well done!
LikeLiked by 1 person
Glad you managed to persevere with this one, and it looks lovely! When we chatted earlier this week I recalled an article in Threads magazine that mentioned Schmetz Chrome-plated needles, and that they are supposed to be less “stick” when passing through fabric (article: https://www.threadsmagazine.com/2017/04/28/notions-chrome-professional-grade-needles ) and on the manufacturer’s website (https://www.schmetzneedles.com/category/Chrome-Household-Needles-37 ) it says “Chrome also allows the needle to pass through the fabric with less resistance.” So they might be a good option for future leather projects – if you can stand one again that is :-)!
LikeLiked by 1 person
Thanks Claire, that’s really useful xx