Yours truly has been on several times now to natter about various SO50-focussed blog posts I’ve written including fabric buying choices and batch sewing, as well as the first official meet-up back before the world went wonky! I have to say that Maria makes it so easy to chat, even though she’s on the other side of the world to me! Zoom is a marvellous invention…
I added a specific Sew Organised Style page to my blog recently so that should always link you to their latest episode.
Tune in on Thursdays to hear what the community has been up to or chatting about or sewing…
I thought I would share with you the video I made specifically for the recent Sewing Weekender here in the UK for anyone who wasn’t able to, or wasn’t interested in attending. Unlike previous years, when the event takes place over two days in Cambridge, this one was entirely online and so the organisers, Kate and Rachel at The Fold Line and Charlotte @englishgirlathome asked an impressive selection of contributors to make short videos on a variety of topics. I’ve never made a film before so it was a pretty steep learning curve!
The first challenge was going to be filming it, and then it would have to be edited in some way too. I worked out that if I balanced my phone on top of my sewing machine in my workroom it was at the right sort of height with good light. Then I decided I needed a script of sorts to keep me on track and that is what I’ve reproduced here, along with the video itself. I printed it out and stuck the sheets to the window and to the sewing machine like a kind of ramshackle autocue! It turned out the window was too far away though and I looked like I was gazing to the heavens for divine inspiration…how to vloggers do this all the time? Maybe they do just waffle on and nobody minds? hey ho, I knew the things I wanted to say and without some kind of prompt I might forget some of them. Anyway, I managed to film it in bursts although I did have to pause one time to shoo the pigeons off the roof because they were audibly clumping about and I didn’t need that distraction too! I found my laptop has iMovies so I managed to splice the whole thing together using that, the next Jane Campion I am not!! The script below is not word-for-word what I said because I managed to freestyle it a couple of times in an attempt to sound natural but for anyone with hearing difficulties it’s close enough, I’m afraid subtitles were absolutely beyond my rudimentary film-making abilities.
I hope you’ve all been enjoying the Online Sewing Weekender and I want to begin by thanking Kate and Rachel of The Fold line and Charlotte from English Girl at Home for taking the very brave and audacious step of carrying on with the event in spite of the strangeness of the times. It’s so great to imagine all of us sewing away at the same time wherever we are in the world.
As well as my own Instagram account I’ve also been involved with the SewOver50 account since the very beginning and whilst Judith and Sandy manage the account on a day-to-day basis I write the blogs which accompany particular discussions or any challenges which have been running.
When Kate, Rachel and Charlotte invited me to be involved I thought I’d chat a bit about the #so50visible challenge involving indie patterns in particular. It first ran in February last year and then again this March.
The reason SO50 began in the first place was because we felt that our slightly older age group was being overlooked by the burgeoning home sewing industry and we really didn’t want it to become as age-centric as the mainstream fashion industry has always been. Plus many of us bring a wealth of knowledge and experience which we’re only too happy to share with anyone new or maybe returning to dressmaking at home.
Many of you will know that the dress pattern market has been dominated for many decades by the so-called Big 4 but in the last 10 years or so there’s been a boom in independent designers putting out their own patterns.
Followers of SO50 have embraced these indie designers with gusto but we also felt a little bit side-lined by them too. We didn’t often see ourselves being reflected back on the packaging or marketing.
The #so50visible challenge was created to draw some attention to ourselves, to highlight that very few older sewers were featured, and to politely encourage a change of thinking.
We came up with the idea to ask people to only sew a pattern which featured an older model in it’s advertising and promotion.
Judith and I spent an absolute age trawling through the Fold Line database and eventually came up with quite a modest list considering how many patterns are listed! We found a few books with older models too.
Throughout the month long challenge followers were asked to share their makes, it meant many people found new brands of pattern maker which we might not have heard of before. Very often the most popular patterns were stylish, fashion-forward and wearable but the model looked more like us. Many of SewOver50’s followers are still very interested in fashion and style and we still want to look good whilst making our own clothes.
Many of us in our 50s and 60s have more time to sew for pleasure and we might have more cash to spend on patterns and fabric too so it always strikes me that it’s a missed opportunity for indie pattern makers to disregard this huge potential market.
While the first challenge was running we also introduced the #so50thanks hashtag because if anyone’s make was reposted by the designer we thought it was important to appreciate that they had first of all noticed and acknowledged the maker and that they were then happy to share it on their own feed.
It’s a virtuous circle isn’t it? Feature an older model on the pattern and it gets our attention, we buy your product, we share our makes, SewOver50 probably reposts to it’s 20K followers, you get free advertising to an audience with money to spend, and more people will buy the pattern because they can imagine themselves wearing those clothes-simple!
There are a few other companies like Maven and Alice & Co who don’t use models at all, just illustrations or mannequins but they are super-supportive and involved in our community and constantly share and repost. Let’s be honest here, most of us are pleased to get a like or a repost because it gives us a little boost that the designer noticed us, we can all gain ideas and inspiration from others, and we want to see the garments being worn by people who are similar to ourselves in some way. The pattern companies which do notice us have then tended to become very popular with SO50 followers, it’s that virtuous circle again.
We think there’s a small element of change happening but there’s a long way to go, though there are more companies than just the ones I’ve had time to mention here and there’s always room for more.
I’m always happy to share the knowledge and experience I have from many years of sewing, and I know of many others who are too. It’s fantastic to be a part of this worldwide sewing community and it’s diversity is vital so if we can encourage a few more indie brands to look beyond the young, slim, white stereotype then that can only be a positive thing right?
Enticing us to spend our grey pounds (or dollars) is a good reason to check out what the followers of SewOver50 are up to especially as there are now almost 20,000 of us! And I will often write honest reviews of patterns or fabric over on my blog which you might find interesting too, I like to think I’m a critical friend. I would encourage anyone to look at the #sewover50 hashtag because there are now tens of thousands of images to inspire you.
Anyway, I hope you’ll enjoy the rest of the Sewing Weekender wherever you are, and I hope whatever you’re sewing is going well, with any luck we will have opportunities to meet again in real life before too long, I do hope so. I love going to meet-ups and being able to chat with fellow sewers, and filming myself like this is a first for me so I hope it’s made a bit of sense!
Thank you again to Kate, Rachel and Charlotte,
Bye bye etc etc…
I spent both days of the Weekender on a video call with two of my sewing buddies Melissa Fehr and Elizabeth Connolly, I met them both originally at the first Weekender and we’ve all been fortunate enough to go to every one since, we weren’t going to let a pandemic stop us this time! I made another Camber which was one of the projects I cut out on my recent batch cutting splurge and I added a machine embroidery stitch from my Pfaff Quilt Ambition 2.0.
If you’ve ever read any of my previous blog posts you’ll know I really enjoy going to meet-ups so not being able to do this for the last few months has been sad to say the least, with luck it won’t be too much longer though. To my mind, this year Charlotte, Kate and Rachel have successfully created the next best thing because everyone could sew whenever and wherever they were in the world. Some did as I did and had group chats going on, two sewers I know set up their machines on trestle tables in the garden (suitably distanced of course!) others were solo but had all the video content to keep them company or by using the #sewingweekender hashtag, some didn’t/couldn’t really join in with sewing on the day for one reason or another but took part in the giant Zoom at the end of Saturday, or early afternoon on Sunday. The Zoom was fantastic because it made me realise just how many people from all over the world had been participating including the US, Canada, Germany, Norway, Israel and Australia, and hearing so many shout-outs for SewOver50 from them was even better! Everyone, whatever their situation or circumstances, had the opportunity to buy a ticket-which was essentially a charitable donation anyway-it will be interesting to see if this is a format that could be repeated in the future to make the event inclusive worldwide. Were you ‘there’? what did you make of the concept, and was it preferable in some way to the real life event for you, or not as good? I’d be interested to hear your thoughts
These have been very strange times of late and many of our regular activities have been curtailed or stopped completely. I’ve carried on sewing because it’s my creative outlet but a few weeks ago I started to feel like I had no clue what particular projects to settle on. Lots of vague ideas would float into my mind but then just as easily float back out again before I got underway with any of them. I had a couple of things which I had to sew for blog posts but beyond those I didn’t have a plan, or a clue!
My friend Melissa @fehrtrade happened to comment in our WhatsApp chat that she had sketched out her summer sewing plans, complete with their fabric needs. Most fabrics were from her stash and a couple of other items needed to be purchased.
This got me thinking, if I actually wrote down a list of all the things I wanted to make then it might give me the impetus to move forwards in a positive direction. So that’s exactly what I did. Some items on the list are patterns I’ve made previously, and love, whilst others were new ones I’ve been wanting to try. Once I’d created a reasonable list I ‘shopped’ from my stash which was good fun, I have some lovely fabrics just waiting for the right project. Whilst I can be something of an impulse purchaser of fabric I’m pretty good at sticking to my own fabric purchasing rules which I listed in the recent @SewOver50 post about fabric-buying which are as follows:
Do I really love this fabric?
Is it suitable for my intended purpose?
Do I really need it?
Price is obviously an important factor too but, for me, it’s loosely covered by these criteria anyway.
I knew with some canny cutting I could get more than one garment out of some of the fabric so eventually I settled on about 8 things from the list. In some cases I had two patterns for one piece of fabric because I couldn’t decide between them.
Once I was ready to cut, initially I picked the patterns I had made before, several times in a couple of cases. Primarily this meant the pattern was already cut out but also I would have things which were reliable because I knew they would fit, I enjoy wearing the style and there’s always room for another version in my wardrobe. Once I’d started cutting I couldn’t stop! I ploughed on for about a day and half until I had a pile of half a dozen items cut out, four of the six were remakes and two were new patterns. I felt very satisfied with this.
So why exactly am I telling you how accomplished I felt!? Because @SewOver50 right-hand woman Sandy messaged me to draw my attention to Lis @ThreadTaylors who had recently posted something similar on her feed whereby she had cut two shirts at the same time for her son and then made them both up too. Now, even though I’ve just told you that I’ve cut lots of things this isn’t my usual practice, I’m normally a ‘one thing at a time’ sewer. When I’m sewing for myself I like to complete the process from cutting to wearing before I move on to the next project, unless something goes disastrously wrong! (it might go on the naughty step for a bit while I sulk!) If I’m making for someone else there are the inevitable delays if there are fittings to schedule but otherwise the same would apply to that as well. Sandy had spotted a topic for discussion here so she invited me to manage a post on @SewOver50 asking if others cut/made in batches, made one thing at a time, or were somewhere in between?
Well the followers of @SewOver50 did not disappoint! Like the recent discussion about ‘cheap’ fabric, this was a topic where lots of you shared your thoughts so I was kept very busy reading, and responding, over the course of the next couple of days.
This is a distillation of your comments and we all seem to have a similar practices at one time or another. Many said they were like me in that they prefer to have one project on the go at a time and this was most often because they want to really enjoy the process. We take time to select the pattern, choose the fabric, match the thread and source the trims or haberdashery. Then very often it’s time to make a toile, finesse the fitting of that toile, maybe even make another toile or two before they are completely happy and ready to cut the fashion fabric, interfacings and linings! It’s all part of what makes dressmaking and sewing an enjoyable pastime for many and it’s not something to be rushed. Personally I wouldn’t say I rush but I don’t always take as much time as possibly I should. Many felt this made them more focussed, or if plenty of time wasn’t an option then they could break it down into 10-20 minute chunks which felt manageable and was still making progress.
To list or not to list? Or sketch for that matter? Melissa likes to create a page of sketches which is great because you can see a style to remind yourself what it looks like, especially if you’re likely to forget which style the pattern number or name refers to, or from a magazine like Burdastyle or Knipmode for example. I’ve made a long written list, selected a few items from it and ticked them off as I cut them. I also have a large whiteboard on the wall of my workroom on which I write different lists for the various things I’m up to and in normal times that keeps me on the straight and narrow.
Some people suggested this kept them more focussed and I think I agree with them, I can still slot other items in as required. Personally I’d never want any list to be completely regimented with no flexibility because that would suck all the joy out of sewing for me. There are times when I do have to sew things which I don’t really want to but it’s a necessity and so the pleasurable makes are the ones which I ‘reward’ myself with.
A few people said they didn’t like the idea of lists or batches because they felt it took too much organisation, I probably feel less like that because I have lots of haberdashery, trims, interfacing etc so I don’t need to think too much about “have I got so-and-so” in order to make a start.
If you’re a serial non-finisher then there’s every chance you’ll end up with quite a large UFO pile. I think lockdown and Me Made May (which has just finished) has forced/encouraged quite a lot of people to revisit these projects on the naughty step and to reassess them. There is a distinct feeling of achievement when working through them to either finish a garment, repurpose it, recycle it or take it apart and start again!
The space we need for cutting out was one of the biggest factors for concentrating the cutting to a certain amount of time. If you use the dining table or the floor then there’s every chance you’ll need to move your things for practical reasons, family life/mealtimes for example, the floor is very hard on the knees, pets interrupting are a recurring theme too! All of these may mean you can only use the space in small bursts which limits how much can be cut. For many dressmakers cutting out is a necessary evil which they don’t enjoy so want it over with as quickly as possible. As a former sample cutter I always make sure I cut as accurately and efficiently as possible to ensure the best results. You can read a few of my top tips in this blog. If you really hate cutting out then batching could be a good thing because it gets it out of the way for a while!
In order to be efficient many told me that they will cut several of the same pattern at the same time if they have a favourite. Tops and T-shirts were probably the most popular of these but dresses and trousers/jeans also cropped up too. This can work well when you know a garment fits and you aren’t tweaking and fitting as you go along. Whilst making several versions of a single pattern one follower told me she writes notes onto the pattern each time in a different colour so that she knows what she’s done, and to see its development during the process. If you’re making a number of the same thing it’s efficient to keep the threads the same but personally I like to use a reasonably-matching thread to overlock as often as possible. Others are less precious and will use the same colour for everything because repeatedly changing threads takes time and keeping a range of colours can be costly.
Many of us have spent at least some of lockdown cutting and sewing scrubs, bags and face coverings, some sewed lots of them, others just one or two sets. I’ve no doubt at all though that they were well received but there’s no getting away from the fact that they became very tedious after a while. The repetition was pretty boring, although it could also have the positive byproduct of making us become more efficient sewers, and we all agreed it gave us a new-found respect and admiration for those who had no choice but to sew in factories, often with very little pleasure or decent wages involved. Some of us developed ‘production’ techniques whereby we would complete each operation the same on every garment before moving on, for example, join all the shoulder seams, attach all the neck facings, insert all the sleeves etc etc. This undoubtedly saved a lot of time but it does make you a bit boggle-eyed after a few days! @alexjudgesews did admit though that making scrubs nearly put her off sewing for life! I’ve no intention of getting into the discussion of whether or not any of us should have been sewing scrubs but I do know that I’m really really proud of how the home sewing community rose to the challenge and did it any way.
Many of us gather each prepared project together in some way, ready to begin. I like to use large ziplock-type bags which I can reuse over and over, I’ll put the pattern and cut fabric in although I don’t tend to include inter, threads or trims (many do) I’ll grab those as I go along usually from what I have. One suggested idea I liked was to use baskets to contain everything, that’s certainly more attractive than plastic bags!
A few comments made me chuckle, someone said she batch cuts but then forgets about them, where they are or even what they are! My friend Corrie @ceramic67 told me “I often cut 2 or 3 at the same time, I’m still slow but it makes me feel faster!”
A recurring comment was to spend separate days doing each part of their own creative routine so, a day printing and sticking PDFs then a day tracing them off, a day or more cutting the fabric and then the enjoyment of the sewing uninterrupted. We all have our own version of what works for us and it will vary depending on the types of pattern we like to use.
For lots of us it’s more pleasurable to be free to decide what to make and when to make it, pre-planning is no fun!
Amongst the ‘planners’ some use mood boards with sketches, photos and swatches, others will often create mini-capsules to accompany clothes they already have, or make a new, related, group of clothing. I keep swatches of the fabrics I have in a little book, it’s very low-tech but it’s good to leaf through and reminds me what I have without getting everything out.
So as you’ll see there’s no firm consensus and ultimately we do what works for us and our situation. Maybe you just batch cut small projects like Xmas gifts of pencil cases or wash bags for example, or maybe you only ever one thing at a time and nothing will persuade you to do otherwise! Having more than one item on the go could give you the option to move sideways onto something else if you realise you’ve got to wait for a delivery, or head out for some buttons or something, has anything you read here made you think you’ll try a different method next time?
Whatever works for you, until next time, happy sewing!
I originally wrote this as a review for the MinervaDotCom blog but I’m not actually sure if it ever appeared. Rather than waste my efforts I thought I’d publish what I wrote here instead.
I’m sure it was a combination of an over-generous stated fabric requirement, my just-to-be-on-the-safe-side ordering and then super-stingy cutting out means that I managed to get not one but TWO sweatshirts out of my Minerva fabric choice this time. At the time of writing last autumn, Minerva were introducing a collection of textured jerseys made in a polyester/ viscose/ spandex mixture which came in a wide range of colours and textures so I opted for a geometric design in lilac to try out. I would suggest that this fabric is not as firm or thick as some jerseys suitable for sweatshirts, it isn’t fleecy on the reverse for example but it has reasonable drape, is soft to the touch and has a fair amount of stretch but not in a ‘really difficult to control’ kind-of way (it isn’t like lightweight jersey for T-shirts for example) it’s actually pretty stable so manipulates well into armholes or cuffs.
I already had a pattern I wanted to try, the Maxine sweatshirt by Dhurata Davies that has interesting diagonal seams across the front which have pockets in them. This actually made cutting out a whole lot more tricky than I anticipated because the ‘check’ design of the fabric I had picked turned out not to be square but rectangular so matching the lines was a real challenge. In some areas I’ve failed so my advice would be “don’t choose a pattern that has too many intersecting seams or style lines” because you could end up tearing your hair out when you can’t get it to match! Once I’d committed though I decided to press ahead and settle for ‘almost but not quite’…not my usual route but there we are.
When it became apparent that by folding and cutting really carefully I’d have oodles of fabric left over I pulled out a very simple sweatshirt pattern Simplicity 8529 and cut that at the same time. You might recognise this pattern as the Toaster sweater by SewHouseSeven if you think it looks familiar. If you fold the selvedges in towards the centre so that you have two folds then it’s often possible to get more pieces out of less fabric, any sleeves, yokes or facings can be cut out of what remains.
I currently have a Pfaff Coverlock 3 on loan to me so I used it to sew up much of the two tops on it’s 4-thread overlocker setting but you can easily sew this fabric on a regular machine, just use a ballpoint or stretch needle and set your machine to a very elongated zigzag if you can (regular stitch length and a narrow width) or a ‘lightening’ stitch if your machine has it. Unlike some jerseys or sweatshirting you’ll definitely need to neaten the seams though because I found the fabric frayed and went fluffy at the cut edges quite badly as a result of the woven nature of the surface design. Use a zigzag stitch on the edges if you have limited options, or pinking shears.
The ‘Maxine’ is a great design which stands out in a crowded field of many other sweatshirts and the well-written instructions and diagrams are very clear and simple to follow. The tricky area could be the point at the centre where the seams intersect, I simply made this more complicated for myself by choosing the geometric design! And of course it has pockets! I’ve made another version of it since the lilac from a remnant of linen/wool which you can read about here.
The Simplicity/Sew House Seven pattern has a very simple ‘grown-on’ collar and self bands on the cuffs and hem. I cut and made this one up in less than two hours and it shows off the textured surface of the fabric very well.
I would suggest that this fabric will make very comfortable loungewear like track pants, tees, sweatshirts, dresses and children’s wear. I don’t know what the other designs in the range are like but if you are pattern match averse then this particular one might not be for you! I thought at the time it would be interesting to see how well a fabric with a raised surface texture like this wears and now that several months have elapsed I’ve found that it catches quite often and has started to pill quite significantly which is disappointing given the price per metre.
My thanks to Minerva for providing me with the fabric to write about, this is a significantly different version of the blog post which may, or may not, have appeared on their website. I did try to find it but their search function doesn’t make it very easy to find specific posts.
A lot has happened since I wrote my last Simple Sew blog post, Christmas for one thing, and I had a lovely holiday in the sunshine too but now we are all confined to our homes because of Covid 19. Without wishing to trivialise the gravity of this situation, one of the side effects of it is that you might have more time to sew.
I’ve had a rummage through my Simple Sew patterns to find one which I haven’t already shown you, and which has opportunities to hack, and I settled on the Chelsea Collection. This is a capsule wardrobe of a short sleeve blouse with two variations, a pair of trousers and a button-front skirt in two lengths. I liked the blouse with it’s shirred sleeves and keyhole back detail but I decided to mix it up a little by adding a button front. Normally we are able to select fabric from a couple of generous sponsors but I wanted to ‘shop my stash’ to find something this time. I found a very pretty vibrant floral John Kaldor cotton lawn which I think I picked up from a swap table sometime and I knew would work well for the blouse.
I didn’t want the blouse to be overly tight so, after checking my measurements I opted for a larger size than I’ve made previously. If you’ve been a regular reader of my posts you’ll know that I tend to check Simple Sew patterns for any discrepancies before I start. There didn’t seem to be any glaring ones but I just added a slight curve to the back hem so that it dipped in the same way as the front and I trued the shoulder seams so there was a smooth flow from front to back.
As I wanted to alter the front significantly I had to make some changes there first. In order to create a button-stand I simply added 2.5cms to the centre front all the way down what would have been the fold. [2.5cms was a fairly arbitrary figure because it depends really on what size buttons you’re using, a general rule of thumb is that the bigger the button the bigger the button-stand needs to be so that there’s enough overlap and the garment doesn’t end up too tight because the overlap isn’t big enough.]I was able to do this by drawing directly onto the tissue before cutting the piece out as there was enough space to do so.
If you’ve already cut a pattern that you want to add to just stick some extra paper to the centre front fold line, or trace off the whole piece again adding the extra. The original front had a facing for the neckline so now I needed to create a new facing which would neaten both the neck edge and the button-stand. To do this I simply traced off the whole of the new front opening including the neck edge and made the facing a depth of 7cms all the way down from shoulder to hem, with a smooth and gradual curve. The photo should make this clearer. The back neck needed a new facing too because the existing one took the armhole into account. Again I traced off the section I needed making it 7cms at the shoulders to match the front facing.
The final change I made was to lengthen the sleeve a little and add some more fullness to it. I started by making the sleeve 5cms longer and then I drew 3 vertical lines on the pattern at approximately the front notch, back notch and shoulder seam points. [Depending how much extra fullness you want to add to a sleeve you could use more places than this but do try to space them evenly apart.] Next I cut up each line from the bottom until I reached almost the top, I left this very slightly attached. With the piece flat on the table I spread the bottom of each slit by about the same amount, probably about 4 cms, then taped slithers of paper into each gap.
If you don’t want to cut the pattern up you can do the same process by still marking the vertical lines on then pivoting the uncut pattern at the top of each line, use a pencil or your finger as the axis. Draw or trace around the first section, which remains stationary, then each subsequent section after you pivot it to so that you get the extra fullness being added at the hem. Opening up the wedges in this way means you’re adding fullness to the hem but not the crown of the sleeve, if you want extra fullness in the crown spread the whole piece more or less parallel. The grainline should run equidistant down the centre of the new piece (unless you want to cut it on the bias)
Having done all this I cut it out and was ready to sew!
I started by joining the shoulder seams of both the blouse and the facings (which I’d interfaced and neatened) then I attached the facings to the neck edge, turned, understitched and pressed. The keyhole back calls for a small rouleau tube as a button-loop which needs to be inserted at the same time as applying the facing although you could choose to make a hand sewn thread loop and stitch that at the end. In fact it isn’t even vital that this is a functioning loop if you’ve got a front opening, the keyhole is purely decorative now.
I put the blouse onto Doris to check it was looking OK and this was when I found that the keyhole appeared to be bagging outwards quite significantly. I decided not to do anything at this point and I would check again once I had sewed the side seams and put the sleeves in, then I would get a better idea by trying it on myself.
I made three rows of shirring on the sleeves next, using my quilting guide to make sure the first row was 5cms from the bottom edge, the next two rows were then sewn parallel to the first. [Refer to a previous blog post on how to sew shirring if you haven’t done so before] Next I sewed up the sleeve seams and pin-hemmed the bottom edge to give a neat finish.
After sewing up and neatening the side seams I inserted the sleeves. At this point I tried the blouse on again to check the keyhole on myself and, with real shoulder blades under it, it didn’t seem so noticeable. Two other things struck me though, the blouse was a little too big so I took it in on the side seams and also the blouse was a bit shorter than I expected. In order to take as a small a hem as possible I made some bias binding from offcuts of the fabric then stitched it (folded in half lengthways and with the cut edges together) to the hem using a narrow 5mm seam allowance [This is a useful finish to any hem or edge where you need every spare centimetre of fabric.] Have a look at the photo which shows you how to get the ends of the binding enclosed within the front facing. I turned the binding up and top-stitched in place.
Finally, I found some ‘vintage’ buttons amongst my treasure trove and there were just the right number meaning the whole blouse had been sourced from what I already have!
Well I hope now that I’ve made it that I’ll have a chance to wear my Chelsea blouse somewhere other than in my own garden this summer, who knows? Maybe you’re reading this long after the emergency ended and life has returned to some sort of normality, although it definitely won’t be exactly as it was before.
Sewing our own clothes is an activity which gives us so much enjoyment for a variety of different reasons and, right now, the simple act of creating something is chief amongst them for me. It’s absorbing and the problem-solving gives me something else to think about.
I think the keyhole back is, by and large, just about acceptable when I’m wearing the blouse. I also think the cure could be to add a centre back seam instead of cutting on the fold so that the point of the keyhole could extend beyond the centre back line, this would hopefully bring the button and loop closer to one another when they are done up…this is just my theory based on experience and I haven’t tried it out. It’s such a nice little detail that I’m disappointed it hasn’t worked out quite right. I also regret not reading my fellow Simple Sew bloggers reviews of the blouse because then I would have known how short it comes up, personally I would add a minimum of 8-10cms to the length next time.
The sleeves are pretty and feminine but maybe they are a little too girly, the jury is out…
It’s back! After the success of the first #so50visible challenge in 2019 we thought you might like to do it again, especially the thousands of you who have discovered @sewover50 since last year and who might have missed joining in.
In early 2019 we set you a challenge to find a pattern which featured an older model (at least 45+) and make it. If you thought this would be easy then you would have been mistaken, because once we had started looking more closely we realised that this was going to be much harder than it sounded.
Rather than me reinvent the wheel again here I suggest you take a read through the extensive post I wrote at the time, and its follow-up, so that you have some understanding of the challenge we set and how the whole idea came about. There is also a VERY extensive list of as many patterns as we could source at that time.
Since last year I’m cautiously optimistic that the situation seems to have improved somewhat. Sandy and Judith have been diligently saving in Highlights over on the Instagram account many of the new patterns that have been released in the the last twelve months which feature older models-male as well as female. Some of these patterns are by companies which have been consistently good at using a variety of models of all ages whilst for others this is a first toe in the water, which is great to see.
It seems that a lot more companies are actively using older women amongst their choice of models now (although a few still think we all want to wear the frumpier selection of what’s on offer-very wrong!) For the most part though, of the pattern companies who are choosing older models, they realise that we can be stylish, creative, outspoken individuals who do not have a shampoo and set once a week, don’t want to be stereotyped and who have money to spend on quality products.
I’ll list as many of the new patterns as I can but, if you’re tempted to join in with the challenge, I would strongly urge you to take a look at those I’ve already listed because each website will include that brand’s new patterns anyway.
Among the new ones we know of are, in no particular order:
Cashmerette-Washington dress and Rivermont Top and Dress
The Maker’s Atelier-there is wide range of patterns to pick from including several new designs Shawl Collar Dress, Shawl Collar Coat, Over-sized shirt dress, Blazer and Wrap Dress
Style Arc-Sheryl stretch or woven pants, among others.
That Wendy Ward-brand new book ‘Sewing Basics for Every Body’, the Kim jumpsuit and the Dylan Peacoat particularly
Simplicity and Butterick have improved considerably since last year and we have been told that they are actively including more mature models in their catalogues now, let’s hope this is the case. There are now a reasonable number of patterns to choose from (too many to list here individually) so browse their website or catalogues to see if there’s something that appeals.
I’m going to leave it there because I’ll never quite know where the end of this list should be! I would urge you to look through pattern company websites, books and catalogues for your inspiration if you’re keen to participate. I would also add that there are quite a number of small pattern companies who are hugely supportive and involved in our community but they either don’t use older models, or they use illustrations, so we can’t include them for this challenge. That said, we are very appreciative of every repost, share and use of the #sewover50 hashtag that any pattern company gives to a SewOver50er, they are always welcome and it helps to keep our little, occasionally slightly wrinkled, faces in the public eye to prove that we’re still here, and have no intention of keeping quiet.
We’ve got prizes again too so thank you to our list of sponsors (so far) who are offering a selection of patterns, and Wendy Ward is offering a copy of her new book too. Winners will be chosen at random after the challenge closes. You’re welcome to share works-in-progress but only completed garments shared with a photo of the original pattern after the closing date will be eligible to win a prize.
Stay in touch with the Instagram account while the challenge is on because that’s where you will find any new information as it crops up. Make sure you use the new #so50visible20 hashtag although the original #so50visible is OK too. If a pattern company reposts your outfit (which obviously we really hope they will!) use the #so50thanks hashtag too. Keep an eye on their Stories feed too because sometimes they forget to tag us, or the tag doesn’t work for some reason.
The #so50visible20 challenge begins on March 1st and runs for the whole of the month so what are you waiting for? Share a photo of your garment along with the source pattern, have a look in saved highlights on the IG account for various ideas how to do this, it doesn’t have to be a brand new garment this year but it should be a new photo of it, not one you’ve shared before. You could even use a flatlay this time, particularly if you don’t like putting yourself in the frame. Have a look at #so50flatlay for ideas on this. There is no limit to the number of entries you can put in either.
We can’t wait to see how SewOver50ers rise to the challenge, the more we keep this in the public eye then the more chance we have of seeing older faces featuring on pattern covers, in magazines, in sewing books. And part of the worldwide fun of this challenge is seeing makes for the opposite seasons to the one we might be living in because, let’s remember, we’re a global account, and that’s a really big deal!
After a couple of months in the planning I can hardly believe that the first ‘official’ Sew Over 50 meet-up is over! This isn’t really a blog as such, it’s more of a photo album so that those who were there can look out for themselves and to prove that it did happen and a great time was had, new friendships were made, information and tips were shared, fabric was stroked and support and encouragement was offered.
Judith and I were simply overwhelmed by the feeling that was in the room for those 3 hours. The Village Haberdashery in West Hampstead, London proved to be the perfect venue to hold the meet-up with it’s mix of light-filled studio space and retail opportunities! Whilst quite a few of us already knew one another, and had met in the past, there were many others for whom this was the very first time they had gone to such an event. The distances some people travelled was extraordinary too, south Wales, Cumbria, Cheshire and north west England, Scotland, East Anglia, the south coast and Cologne, Germany were just some of the places people had come from. This represented a really big deal for some because it took them a long way outside their personal comfort zone to go on a long train journey to London and meet lots of strangers who they only ‘knew’ through the medium of little Instagram squares. So far as we can tell all of them thought it had been worth the effort and anxiety because within minutes of arriving they were chatting with fellow sewers and crafters as though they had known each other for years. That’s what the Sew Over 50 community seeks to encourage, to nurture and expand each others skills and talents, we try to make it a positive and supportive place to share our makes whether they are completely successful, or a dismal failure!
I would personally like to thank every single one of the companies and individuals who gave me prizes for the charity raffle in response to my requests, and several others who offered without me even asking.
Have a browse through the photos (please ask permission and credit me if you would like to use them elsewhere though, thank you) these are just a few of the hundreds that my daughter Bryony took for us but without them I don’t think there would be much record of the event having taken place…hardly anyone else took photos because they were too busy chatting!
I had opted to raise funds for The Samaritans, a UK-based charity who offer support at the end of the telephone to those at risk of suicide and the raffle made over £550 which is magnificent.
Thank you so much to everyone who came along and made it so enjoyable, thanks especially to Judith for having the courage to start the account in the first place. We’re approaching 18K followers and there have been almost 52K uses of the hashtag #sewover50 That’s a LOT of work which Judith and Sandy put in every day to ensure it’s such an enjoyable, interactive and mutually supportive community. I for one hope it continues this way. I’m sorry to those of you who couldn’t get a ticket, or are simply too far away, we want to actively encourage you to create your own meet-ups like this, there was no sewing at this one but you just need a venue where you can chat, a friendly cafe? your local sewing shop? Now we’ve started the ball rolling don’t forget to use the hashtag #so50meetup so we know what you’re up to.
If you’ve read my blog in the past you’ll know I’m a fan of Trend patterns. Lucy is a pattern-cutter and designer based in London and I always make a bee-line for her stand when I go to the Knitting & Stitching shows. At the show last autumn I fell for the Square dress which, as the name suggests, has a square hem and diagonal seams. There are no bust darts because it uses bias cutting to create the fit and because there are no fastenings it’s actually a fairly quick make and would suit a dressmaker with a little bit of experience. If the lack of darts might cause you a problem I definitely suggest you toile the top half of the dress so that you can assess whether you personally need to carry out a Full Bust Adjustment (FBA) Lucy has been working hard to extend the size range across her patterns and as one of the newer styles the Square (TPC23) comes in the more extensive range sizes 8-22.
I bought a copy of the Square (and a skirt pattern too) and shortly afterwards my friend Dibs who owns Selvedge & Bolts online fabric shop asked if I’d like to choose some fabric as a gift in order to write a review of it. So with this pattern in mind, and my upcoming holiday, I picked out a fine linen in a tiny red/white ‘checked’ print. I was so happy with it when it arrived and it’s perfect for this loose type of style.
Before I cut into the beautiful linen I decided to make an initial version in some checked flannel which, at a guess, I’ve had over 25 years in my stash! You can’t rush these things…
Normally I’d try very hard to pattern-match the checks but there wasn’t enough to do that. The seams on the dress run diagonal but in fact only the back and front bodice are cut on the cross, the other rectangles of the skirt are cut on the straight grain so it’s much simpler than you might think to cut and sew together. The pieces are all quite large so there’s not much opportunity to cut many corners, and I didn’t quite have as much of the flannel as was recommended so I reduced the lower skirt panels (front and back are the same for this and the upper skirt panels, the front and back bodices are different though) To reduce the panel I simply folded out a parallel section through it’s longest side. This turned out to be advisable because at 5’5” the points would have touched the ground unless I was wearing high-ish heels.
I cut a straight size 14 and made no other adjustments, the front and back are cut on single fabric and as they are asymmetric you’ll need to keep any directional-print in mind, especially if you reverse any pattern piece to fit it onto your fabric . It’s a straightforward make though so after the cutting out it’s a breeze. I would only suggest that you take care when pinning and sewing the diagonal sections together to avoid stretching the edges out of shape before you sew them. Keep everything flat on a table as much as possible while you do this part. The hem is a deep ‘grown-on’ one which you mitre at the points and this helps give the skirt it’s weight and fluidity. I was happy with the flannel version so I immediately cut the linen one ready to sew up.
The linen sewed together beautifully, it’s quite lightweight and with a lovely drape. As the seams are such a feature of the dress I decided to use one of the decorative stitches my Pfaff Quilt Ambition 2.0 has to offer. After trying a few I picked out a sort-of diagonal grid design which echoes the print on the fabric.
I’m really pleased with how the linen dress has come out, the decorative stitches are perfect for accentuating the seams and it’s such a comfortable style to wear. I’ve worn the flannel version mostly with a roll-neck jumper over the winter, it’s very striking and has garnered many compliments. the linen had to wait until we had our recent holiday to be worn but it was perfect for warm weather and, best of all, it has pockets! I can’t wait to be able to wear it again in the UK…
This such a simple-looking pattern but has so much scope to add drama, it’s distinctive without being outlandish and still be completely wearable…at least I think so!
I first met pattern maker Dhurata Davies at my friend Sal’s ‘Sew2gether’ event last spring and then our path’s crossed again unexpectedly a couple of months later when I made a last minute decision to go to the Threads textiles fair in Farnham. Dhurata was exhibiting there and she offered me a copy of her Maxine Sweater pattern in return for a review. The pattern is intended as a sweatshirt, and I’ve made one in a jersey fabric already, but it also works well in a woven too. It was the diagonal seam lines with pockets concealed in them that appealed to me. The sweatshirt version was for a Minerva fabric blog review which hasn’t appeared yet at the time of writing but now that I’ve made a second top I can tell you all about the pattern here.
I had picked up a modest remnant of ‘Woolsey’, a linen/wool fabric in the Merchant & Mills shop in Rye last August, it’s a lovely deep teal colour which is one of my favourites (although it’s a devil to photograph accurately). When I made the jersey version I made a size 16 based on my body measurements and there’s plenty of room in it so I knew I could risk making the same size in a non-stretch fabric. [If you are making anything more usually intended for a fabric with some stretch you will almost certainly need to go up a size or two, especially if it’s in any way close fitting. Measure the pattern itself if you’re not sure and don’t forget you need to be able to get it on, will it need additional openings like a zip or buttons if there’s no stretch to get it over your head, or your hips?]
Before I cut anything out I made myself a ‘whole’ sleeve pattern piece, it comes as a ‘half’ sleeve vertically so this needs to be placed on a fold in the fabric (twice as you need two sleeves!) but I always prefer to have a complete sleeve. Just stick the pattern to a large enough piece of paper so that you can fold it down the central ‘place on fold’ line, fold it in half and pin in a few places then cut out a new symmetrical pattern piece.
I knew I would not have enough fabric for the separate collar, cuffs and hem-band pieces but I could lengthen the body so that it wasn’t ridiculously short. I added about 10-12cms to the bottom of the front and back pieces. I had to decide how to finish the neckline instead of the collar and I came up with a combination of piping directly on the edge first and then a band of jersey ribbing. I didn’t know how, or if, this would work but the piping would look fine on it’s own if the jersey wasn’t any good.
The instructions and illustrations are nice and clear and straightforward and it’s not as difficult as you might imagine to get the diagonal cross in the centre. The seam allowance is just 1cm so I always highlight the pattern when this is the case so that, when I make the pattern again, I don’t sew it up as 1.5 by mistake and it’s all too small!
Once the front was complete I joined it to the back at the shoulders and then made some bias binding for the neck. I had just enough scraps to cut 3 strips which were approximately 50cms long and 4cms wide which I joined to form one long strip. I have a specific piping foot for my Pfaff Quilt Ambition 2 which is really useful but you can usually use your zip foot if it allows you to stitch close enough to the piping cord. Not all zip feet are good at this especially if it’s the generic one which comes with the machine but there are usually adjustable ones you can buy which, in my experience, are better. The piping foot actually sits over the top of the fabric and piping cord rather than just beside it so it’s held more securely and stitches much closer to the piping for a better finish. If you want to see another use of the piping foot pop over to my review of the Simple Sew Lizzie dress.
Once I’d made the piping I sewed it around the neck, raw edges together and making a neat join at the back. I knew I wouldn’t be able to find a matching jersey so I opted for a complete contrast. I bought 50cms each of deep red and dark grey tubular jersey from Backstitch and when I put them together I decided that the red made a more interesting garment. Generally when you’re adding a stretch band you work on the basis of it being approximately 85% of the neckline/cuff/waistband measurement that you’re attaching it to, depending on the stretch of the jersey. I’d made things tricky by adding the piping first so the machine had to go through a LOT of layers of fabric. I must say that the Pfaff sailed through it all pretty easily. The only time it was hard work was over the seam allowances on the cuffs. Because I was making this bit up as I went along I sewed the piping onto the cuff first then sewed the under arm seams, if I were using this finish again I would sew the under arm seam first and then put the binding on ‘in the round’ because it would be less bulky where it crosses the seam. I used my little seam-hopper gadget to help lift the foot to help ease it over the bulky seams, this one came with the machine but you can buy something called a Jean-a-ma-jig or even use a piece of thick folded cardboard.
Having told you 85% is the usual amount for a stretch bands I should have made the neck one slightly shorter than that as it doesn’t sit completely flat even after a good amount of steaming. I left it though because it doesn’t look that bad and it would be a lot of work to re-do it. First join the band into a loop along it’s narrow edge then fold it lengthwise in the same manner as the cuffs and then divide it into 4 equal parts marked with pins. Next equally divide the neck (or cuffs) equally into 4 too. Pin the band onto the neck (or cuff) at the marks and stretch the band to fit and stitch in place. You can see from the photos that this was quite tricky because of the number of layers involved, I graded the layers so that it reduced the bulk as far as possible. All these layers plus the piping cord made it too difficult to get the cuffs under the overlocker so I finished the edges using a simple zigzag stitch. Around the neck I used the Coverlock 3.0 to coverstitch which had dual benefit of neatening on the inside and giving an attractive double row of top stitching on the outside.
To finish the hem I just overlocked the edge, turned it up and stitched twice. So that’s it really, I’m very happy with the finished top, I layered it up with a thin RTW T-shirt when I wore it to go to Brighton recently. The fabric doesn’t seem to crease so much as bend, it’s of a double-weave construction the same as cotton double gauze.
I’m really happy with the outcome of this top, the fabric has lent itself well to the more smocky kind of shape and although it was bit involved I really like the finished effect of the addition of the stretch cuffs and piping onto an otherwise simple garment. The ‘Woolsey’ fabric does fray a bit because of the loose weave but it’s manageable. Incidentally, this pattern looks great lengthened into a dress or with the pockets left out of the seams if you’re short of fabric.
Thank you Dhurata for the gift of the pattern, in my opinion it’s a goody and if you aren’t adding extras like me it’s a nice quick half-day make. Dhurata has also designed some lovely children’s patterns too which you might be interested in.
The Amelia tea dress isn’t one I’ve sewn before but Jane who comes to my sewing class had made one last summer and I remember liking the shirred elastic midriff section. The brief for our makes this time was ‘festive’ (we usually don’t have a brief, it’s free-choice) Bearing this in mind Bobbins n Buttons had offered to provide me with fabric so I had a browse on their website and selected the Lady McElroy ‘beauty and the bees’ stretch velvet.
The pattern isn’t intended for jersey but it is simple shapes and a bit of gathering which I knew would still work well, what you don’t want is a fabric that’s too thick or stiff though because the shirring won’t work properly. I planned to hack the pattern a bit so I decided to add long bishop sleeves as it’s winter, I also lengthened the skirt (more on that later) and of course I added pockets!
Because of the distinctive large print I opted to remove the centre back seam and put the zip into the side seam instead, this was to save me the hassle of trying to pattern match the print across the zip. Because I’d removed the CB seam in the bodice I took it out of the skirt too, for the same reasons. If you’ve got a tricky print to match over a seam like this consider whether you can move the zip to the side, it’s not much different to put in and the opening can be a little shorter but still give you sufficient room. Now I could have a line of bees central down the back (and front of course) and just needed to get a good horizontal match too for me to be really happy.
As I said before I wanted the skirt as long as possible but there needs to be a compromise between length versus flare because of the width of the fabric. If you want the skirt to be longer you’ll need to reduce the amount of flare at the hem because you’ll be restricted by the fabric width. The wider the fabric then the more scope you have. I measured how long I could make the skirt before it would need reducing at the hem and decided it would be an acceptable length. I could add around 10cms to the hemmaking sure the new side seams were at a right angle to each other so that the hem will run in a smooth line. I traced around a few bees where they crossed the cutting line so that I could ensure the front and back matched as well as possible.
In order to cut everything as efficiently as possible from the fabric I first cut the skirts against the main fold-don’t forget to exclude the CB seam or the piece will be bigger than your back bodice (if you’re excluding the zip)
Then I refolded the fabric with the selvedges into the centre to cut the bodice pieces on the folds. This is vital to get those bees running down the centre.
From the remaining fabric I cut a pair of long sleeves. I used the pattern from another design I’ve made a few times, I measured the armhole of the dress and compared it against the sleeve I have. It was a little smaller at the crown so I added a small amount to give it sufficient width. Finally, because it’s jersey, I chose to use a neck binding instead of the facings so I cut two narrow strips which were each the same length as the CF to CB measurement of the neck plus a couple of centimetres seam allowance.
Ok, so I mostly followed the instruction with a few minor changes because of my alterations. One thing I did first of all was to stabilise the back shoulder seams and the left side seams where the zip was going to go with iron-on interfacing because I don’t want them to stretch out of shape. I chose to leave the back darts in although I possibly could have eased them out as it’s a stretch fabric.
After joining the shoulder seams I added my neck binding. I folded the strips with RS out along the long edge-I didn’t join them to each other at this stage-then, starting at the V, I stitched just that section into place. This way you can sew just a small part, snip into the V and pivot at the corner more accurately. When I was happy with this I sewed the rest of the binding on leaving just the CB part unsewn, then I could join the two strips in the right place and finally attach it to the neckline. Finally I neatened the edge all the way around and then topstitched it down close to the seam to stop it rolling.
The next part is the shirring which really isn’t difficult so don’t panic. First wind shirring elastic onto an empty bobbin BY HAND stretching it very slightly as you go, put it into the machine in the usual way (you may wish to check the manual if you have an older machine in case there is anywhere else you need to thread the elastic through) Use your matching colour thread on the top in the usual way and lengthen the stitch slightly, it doesn’t need to be zigzag or anything though. Definitely try out a test piece first and don’t forget to secure the start of each new row so that the stitching doesn’t come undone. I don’t secure the other end at this stage though in case I find I need to pull the threads up any more later. You should be able to sew 8 rows of stitching parallel to each other to complete the strip. The fabric will naturallypucker up pretty well but when you’re done stitching hover the iron with plenty of steam over it and you’ll find it gathers up some more as a result. Finally knot the ends of the threads to secure.
Then you need to attach the gathered band onto the lower part of the bodice making sure it’s evenly divided as you go.
Attach the skirts (I’d sewn the pocket bags on to each side seam before doing this. I just use my handy cardboard template which I made ages ago, I just trace around it directly onto the fabric and cut out.)
Next the zip goes into the left side seam. I sew it here out of habit as I’m right-handed and find it easier to do up that way but put the zip in whichever side works for you. After neatening both side seams separately first I sewed up the top of the side seam by about 4cms from the armhole edge. I used an invisible zip and inserted it in the usual way, making sure the waist seams matched, and then joining the rest of the side seam once I was happy with the zip insertion. I sewed up the other side seam and I was ready to tackle the sleeves.
The sleeves are set-in so I made the elasticated cuffs on the flat first using straight strips of jersey the same length as the curved cuff edge. With the strip open and RS together I sewed it once.
Then I folded the strip in half and sewed it on the overlocker to create a channel.
This will turn downwards to form the cuff which I slotted wide elastic through, securing at both ends.
Finally, I sewed the underarm seams to create the sleeves which are inserted into the dress as per the instructions.
All that’s left to do is the hem which I sewed on the coverstitch machine which is on loan to me by Pfaff at the moment.
I’m really pleased with how the dress has turned out, it’s very swishy and has a slightly 1940’s vibe to it. I like the extra length on the skirt and the sleeves look fab. I was a little alarmed when I saw the large scale of the print but actually I really rather like the bees now. One thing I’m not keen on (and this is down to the manufacturer and not the supplier) is that they have printed a black background design onto a white base cloth. Because the cloth has a pile it means that anywhere there are joins there is a slight hint of the white showing through which is not ideal. The velour isn’t too tricky to work with as the pile is a bit flatter than velvet but it does still ‘creep’ a bit in places so if you’re in any doubt that pins aren’t enough to keep it all in alignment make sure you tack (baste) seams together. If you have a walking foot I would definitely advise using it.
I hope this will help you to feel inspired and perhaps have a go at ‘hacking’ a pattern for yourself. This was a very simple one but if you look at my Simplicity blouse hack you can see just how carried away it’s possible to get!