Considering it’s a raincoat this is a project that came out of a clear blue sky! In other words, I had no plan to make a raincoat until, that is, I spied this gorgeous showerproof Missoni fabric on Dibs’s Selvedges and Bolts website. I’m not normally a sucker for impulse purchases of online fabric but this one with it’s eye-catching colours just had my name on it!
Once I had it in my hot little hands I had to come up with a design for a jacket. My starting point was a vintage pattern for a kagoule-type top which is probably from the late 50s-early 60s but there’s no date on it sadly. As was typical of patterns from that period it’s a single size, medium, which I already knew was OK because I’d used it once before about 4-5 years back. I also have a cheap-as-chips packamac which is a nice style but turned out to leak like a sieve! I would use this as my sample to follow how components like the zip and a storm flap on the front go together for example. There were a few other patterns which gave me some ideas including The Maker’s Atelier Utility Coat and from these various sources I sketched a few drawings to come up with a design I liked.
As the fabric was expensive I only bought two metres so I had to progress carefully for each step. I made a new pattern for most pieces because the new version would be mid-thigh length and have a full length front zip opening to be covered by a storm flap, plus I repositioned the shoulder seam forwards to minimise possible leakage through the seams. I altered the side seam shaping a little by curving them out slightly, to give a bit more room for bulky jumpers/sweatshirts. I reused the original hood and sleeve patterns, plus I settled on two pleated patch pockets with separate flaps on top. To reinforce the shoulder area I made an inner lining pattern which acts as an internal yoke.
I read up a few general tips for sewing shower proof fabric before I started-I didn’t need it to be waterproof so I didn’t tape each seam but I did lengthen the stitch slightly, to reduce the number of puncture holes through the fabric which could potentially let water in. I also used a fine Microtex needle to reduce any friction there might be whilst sewing too. This fabric is different to other woven fabrics because of it’s special coating so any mistakes which have to be unpicked would leave holes. It’s possible to press it carefully but not too hot or you could melt it. Use a pressing cloth over the top and warm the iron up incrementally on a scrap piece until you’re happy with the temperature.
It took me a little while to source the hardwear I needed, many suppliers of zips had the length but not the colour, or the colour and not the length! Eventually I bought two open-ended zips of different colours from Jaycott’s. I couldn’t seem to find any suitable coloured round elastic online so eventually I settled on narrow grosgrain ribbon from VV Rouleaux for the hood and back waist detail instead, plus I sourced some small spring cord-lock toggles to secure the ends where needed. I found the lining for the hood and the shoulder yoke amongst fabrics I already had.
I sewed the jacket up in ‘bite-size’ chunks of time rather than pushing on through-mostly because I was often waiting for something to arrive in the post before I could do the next part. As I wasn’t following a particular set of making instructions I was winging it to a large extent, the order of making was often influenced by another section of the garment having to take a priority at certain points.
It would have been better if the sleeves could have been just 4-5cms longer-I’m not sure why they seem short because I’m sure they weren’t on the original sweatshirt-perhaps the big difference in fabric types was a factor? Anyway, no matter, I added a small section of elastication to the top of the cuff to bring it in slightly to help prevent drips seeping back up my arms if possible! I should add that normally I would pattern-match the print but I didn’t see any need to do that for this jacket.
Because this is very much a ‘make it up as I go along’ garment I used some of the ribbon to neaten the neck/hood seam and jolly nice it looks actually!
For an unplanned garment I’m very pleased with the outcome, I love the colours and I hope it will be useful, it folds up pretty small so I can shove it in a bag if I’m going out and don’t want, or need, to take a heavier coat. It’s very much one of a kind! In normal times I wouldn’t have been sourcing everything online, I enjoy browsing in real shops for haberdashery and trims, but not just at the moment.
In 2016 I took part in Portia Lawrie’s Refashioners competition for the first time when I made a jacket from two pairs of Mr Y’s old jeans, you can read about that one here. I was jolly pleased with it and wear it a lot and obviously I didn’t win although I did get a mention in despatches so I was chuffed with that.
For Refashioners 2017 Portia announced it would be SUITS! Eek, I thought, I’m not sure about that…anyway, nothing daunted, I started thinking about what I might be able to do if I tracked down the right suit. I knew I didn’t want anything too dark or work-a-day so I hoped to find something in a check perhaps. Funnily enough it didn’t really occur to me that it could be something like linen or suede, or a woman’s suit so when the inspirational Blog Tour throughout September started and it featured some of alternative fabrics I did think “oh, why didn’t I do that?” Hey ho…
When it came to inspiration however there was only one person whose tailoring I was interested in and that was Alexander McQueen. The retrospective of his work ‘Savage Beauty’ at London’s V&A museum in 2015 was absolutely mind-blowing-I went 8 times! [I bought annual membership to the museum so that I could go as often as I wanted, it’s fair to say I got full value for my money. I’ve kept up that membership ever since and use it regularly] Whilst I’ve no hope of ever acquiring or wearing McQueen (apart from my treasured silk scarf which Mr Y bought for me at the end of the exhibition) I greatly admire his meticulous tailoring, originality, attention to detail and craftsmanship which has been ably continued since his death by Sarah Burton. [I didn’t blog about Savage Beauty at the time but I wrote one about a fascinating parallel exhibition that was at Tate Britain, you can read thathere]
Portia had set up a Pinterest page of inspiration too so I had a look there as well as internet searches of my own and the book which accompanied the exhibition and is full of wonderful images. So many clever ideas but there would be serious fabric constraints as I only wanted to use one suit, once I’d tracked it down, which meant some things like dresses with elaborate details would be impossible. If I was going to invest quite a lot of time into this it needed to fit me and I’m not a stick insect so I have to be realistic!
I collected ideas and images although some of them were unlikely contenders, for reasons of practicality, quantity of fabric and my own skill level. [I went on a tailoring course at Morley college in London last year and picked up loads of useful skills and the confidence to tackle this head-on, have a look at their prospectus because they offer some great courses] I liked the idea of combining different fabrics and techniques, particularly over or near the shoulders.
I scoured all our local charity shops but didn’t find anything I liked, Mr Y and my Dad didn’t have anything in their wardrobes either. Then, when we were visiting Salisbury in Wiltshire at the end of August, we tried a couple of shops when I spied a black and white checked jacket. It seemed to have trousers with it which didn’t match but these were Prince of Wales check! Looking further along the rail we discovered the right jacket for the trousers was on another hanger-yippee, success! a matching suit in the perfect fabric. It was £25 which was a bit more than I had hoped to pay but the money would go to a good cause so it was a win/win situation really. Even better was the fact it was 100% pure wool and it was a Daks suit from Simpsons of Piccadilly which would have been pretty expensive originally-I definitely lucked out with this one. At £25 though it did mean I would only use one suit rather than buy possibly 2 to mix together. No matter.
So now that I had the suit I needed to come up with a design. I also set myself the rule that I wouldn’t buy anything else so everything had to come from supplies I already had in my workroom. I tried to be a bit ambitious-and different from last year-and initially came up with a few dress designs where I thought I might be able to utilise the trouser legs to make panels and a feature-zip detail.
Before I went too much further though I needed to disassemble the suit to see exactly how much fabric I had. I got out the snips and unpicker and set to (not without trepidation because it was a lovely suit)
The beauty of pure wool is that it presses like a dream and so almost every original crease in the suit disappeared once I’d broken it down into all the parts. Needless to say there was less fabric than I’d hoped for my big plans so I had to modify them a lot. Out went the dress and in came [another] jacket. I’d been looking through my not inconsiderable pattern stash for inspiration and I’d found a dress pattern from 1973 which was amongst a huge number gifted to me last year by a friend. They had belonged to her Mum who was a fabulous dressmaker at Cresta Silks in her youth. Even though it was a dress I was attracted to its striking style lines with a long bust dart that ran parallel to a diagonal under-bust seam, and because it had a centre front seam I thought it was easily adaptable to a jacket. One of the features of McQueen’s work is his unusual seaming and style-lines so I decided to make a toile and see how it went.
The original collar opened at the back for the zip so I made a new pattern so that it opened at the front instead. I also had to change the front and back ‘skirts’ by dividing them evenly in half because the pieces would be too large for the fabric quantity I had. I also wanted to be able to cut various pieces on the bias to make it more interesting so they had to be smaller to achieve this.
By using an open-ended zip I minimised the amount of fabric needed for the front opening, there was no need for an overlap and there’d be barely enough anyway. I also knew that if I could use the original sleeves I would be be able to use all other available fabric for my design.
Amazingly I was happy with the toile and decided to press ahead with the design as it was. I could get the new front panels out of the original, and even managed to include the breast pocket and all the under-linings. However I couldn’t work out a way of satisfactorily utilising the pockets and flaps so they got left out. In the end I couldn’t use the back as per the toile, which had darts and the pattern piece was too large to fit as it was, so I turned the darts into princess seams instead and then those pieces came out of the original back after all. There was a tiny hole in the back but I repaired it with iron-on interfacing and no one would be any the wiser. I’d wanted all the peplum pieces to be on the bias but in order for them to be a reasonable match some had to be on the straight instead.
I won’t pretend that every seam has perfectly matching checks but given the fabric constraints I’m really pleased with the outcome. I carefully made the jacket up, a very enjoyable process, and because it was being fully lined I didn’t need to neaten any of the seams inside, they could just be pressed open. I remembered my tutor Daniel at Morley saying “steam is your friend” and wasn’t afraid to use it often, in conjunction with my tailor’s ham and a pressing cloth.
The trickiest part of the construction was making the original sleeves a little shorter for my arms and to fit into the new armholes. I roughly measured the sleeve head and compared it to the armhole. There was a fair difference so I needed to reduce the sleeve width by sewing up some of the under-arm seams to about elbow level (they are two-part sleeves) I tacked one sleeve in and tried it out. It looked pretty satisfactory without any further adjustment so I did the same to the other one as well. I tried to ensure that the checks matched as best I could too. Again I tried the jacket on to make sure I could move my arms and that I was happy with their length. After I’d machined them both in I reused the pieces of canvas and domette which I’d taken out of the original sleeve heads. These are part of tailoring construction which help give a good rounded shape to the sleeve head and are basted in place by hand onto the jacket seam allowance itself. I also planned to reuse the original shoulder pads later on.
Once the sleeves were in I could think more about the decoration I wanted to add. One of the recurring features I like about McQueen’s tailoring is his use of lace appliqué and embroidery. Amongst my stash of fabrics I have some beautiful black Guipure lace which was left over originally from the bridal shop where I used to work creating and making the most beautiful wedding and evening gowns. I’d used some of it on my elder daughter’s Prom dress 10 years ago but there’s still some left over so I had a little play. I put the jacket on Doris and draped pieces of lace over the shoulders to see what looked best. Part of the beauty of Guipure is that you can trim it into shape without it fraying or falling to bits so once I’d positioned it where I wanted I could trim it to neaten the shape. I love the swirls!
Looking at these photos you can see the other decorative technique I decided to use, embroidery.
I’d seen a very recent McQueen design which had red lacing on and I wanted to incorporate something similar probably in the form of hand embroidery instead, particularly because the fabric has a fine red stripe running through it.
I had a few practices first at simple running stitch, sashiko-style, and I tried a sort-of feather stitch but it looked pretty rubbish and uneven as I couldn’t get it right or consistent so I tried a couple of stitches of the many that my 25-year-old Elna 7000 machine offers.
I liked the feather stitch but decided it would be over-doing it so in the end I settled on the saddle stitch which would normally be used to top stitch but I was going to run it along some of the red stripes in the fabric for emphasis. [If you’re not sure which stitch this is on your machine it’s the one where the picture looks like 3 rows of stitches side by side. It’s actually 3 stitches on top of one another when it sews thus making an effective top stitch]
I decided to follow a few of the red stripes on the front and back, the front ones all run vertically and the back ones are just on one side in a cross formation. I considered putting them elsewhere too but decided there was enough.
Once I’d finished all the decoration I put the shoulder pads and the ‘plastron’ back in (this is a piece of heavy canvas which is part of the underlinings of tailored jackets and which helps give it a smooth line over the chest) The plastron needed to be trimmed slightly to fit inside since it had come from a man’s jacket. Finally I’d managed to salvage just enough fabric in one long strip to make a very narrow facing inside the zip. I turned up the hem first basting it in position and then herringbone stitching it by hand.
I’d found some black lining fabric in my stash so cut out the jacket lining (excluding sleeves because they had their own original lining in) and sewed it together. Red lining would have been nice but I didn’t have anything suitable and I’d have broken my own rules to buy some. Because the facing strip was so narrow I wanted to smarten up it up a bit so I dug out some black braid which I stitched down the edge of it-it looks much better now if the jacket is open.
Next I hand stitched all the linings in position at the hem and around the armholes so that everything was enclosed. The final thing I decided to do was change a couple of the cuff buttons so I swapped one on each wrist to red ones.
And that’s all there is to it…..
I’m afraid I’ll never make much of a model and the backdrop was a choice of either a brick wall or a flower bed! The photos aren’t by Testino (Katie actually) but I hope you’ll get an idea of how the jacket looks, it’s a distinctive but wearable one-off.
I’m so chuffed with my finished jacket and, better than that, I really enjoyed the planning and making very much. I felt I got back in touch with lots of the skills I’ve acquired over many years of sewing, some of which helped me to plan it carefully within the constraints set both by Portia and the ones I set myself, and others meant I could stretch my making skills further than they tend to get stretched these days which is no bad thing.
Initially I wasn’t sure if this would be a refashioning challenge I could rise to but I’ve surprised myself with the outcome. I’ve now got a jacket which I’ll be really happy to wear and I shall enjoy telling anyone who cares to listen exactly how it came about. I don’t know the story of the suit before I bought it but I feel like I’ve given it a new narrative now by reinventing it in a new form….and that might even be something McQueen himself would have applauded.
As ever many pictures are my own but the rest are sourced from the internet.
Have you made a suit refashion this year? I’d love to hear about it, or tell me your thoughts about mine…(risky hehe)
Just a quick update of two exhibits which are in London at the moment in case you’re planning a visit to the capital.
At the Wallace Collection in Manchester Sq just behind Oxford St there are currently many beautiful examples of the shoes made by Manolo Blahnik over the course of his long career. He is a frequent visitor to the museum and over the years has used many of the rooms and their paintings and artefacts for inspiration. It’s easy to see this as you move around the upper rooms in this building which hosted many fashionable parties in its elegant salons. The shoes are displayed within beautiful glass domes and they have been placed in specific rooms and settings by Blahnik himself.
Even if you’re at the Wallace Collection primarily for the shoes don’t neglect the rooms themselves because there’s lots of varied and beautiful art to display including several Rembrandts, Gainsborough and Sir Joshua Reynolds portraits, and The Laughing Cavalier by Frans Hals (more of a smirk really…)
So, lots and lots of shoes, some-most-were very impractical, bought by women who don’t have to walk far or travel on public transport…This exhibition is on until September 1st and is free to enter which has to be a very good reason to go.
Also free is the exhibit on the second floor of the Alexander McQueen store in New Bond St, it’s intended for students but as a keen dressmaker I think that counts too.
We had attempted to visit here several weeks ago but it was closed because they were filming so do be aware there’s a possibility it might not be open for some reason. Check the shop opening hours too.
I was practically hyperventilating as we climbed the spiral staircase (with anticipation not lack of exercise!) I have been a long time admirer of Lee Alexander McQueen’s work and that of Sarah Burton since his untimely death in 2010 so to be so close to the garments, samples, inspirations and working processes is an extraordinary opportunity. I visited the Savage Beauty exhibition at the V&A in 2015 a ridiculous eight times and I’m not ashamed of it!! Part of what I admire is that McQueen himself was the whole package-he designed incredible garments which pushed boundaries but he could also cut patterns, sew garments by hand or machine, he was a true visionary.
You’re not left to your own devices once in the exhibition space, there is a member of staff to show and explain anything. Maria was there when we visited and she explained that she works in the Atelier most of the time and at others she is at the exhibit to help visitors to understand and appreciate what they are seeing. Whoever is there if you visit make sure you ask questions to get the most from it.
On the rails are examples of vintage garments which were deconstructed to their bare bones, analysing the techniques underneath in order to create new and original garments.
For example the beautiful black embellished jacket and trousers were inspired by several vintage and antique mens frock coats and jackets, the exposed canvas, pad-stitching and quilting were reinterpreted with a modern twist, including beautiful jet-embellished lace applique. [Take a look at my previous post when I refashioned a two piece suit into a McQueen inspired jacket.]
Some of the inspiration for the fabrics came from an antique Jacquard fabric samples book found in a Parisian flea market.
As well as the black suit there is also a completely contrasting dress which has it’s origins in the John Everett Millais painting of Ophelia (in Tate Britain) the pioneering photography of Julia Margaret Cameron, a Victorian wedding dress and original Victorian corsets which, like the jackets, have been taken apart to analyse their construction.
In addition to the actual dress there is a full-size and several miniature versions made in printed paper which are like beautiful sculptures.
There is also an outfit with a hand-painted leather jacket and asymmetric knitted dress underneath, it turns out that our guide Maria was responsible for painting it (in gouache apparently)
In addition to the new garments there are a few from previous collections including the iconic high-collared corset made in 1997 by Mr Pearl.
If you’re interested in the ‘bones’ of garments and knowing some of the processes which lead to their creation then you’re bound to find this a fascinating exhibit to visit-I felt incredibly privileged to be able to see the garments so close and to have someone like Maria explain firsthand what we were seeing. As I said earlier, the exhibits will change regularly, this one is due to continue for a few more weeks and then a new one will be installed in September, we asked what it might be but Maria was sworn to secrecy!
Overall, two fascinating short term exhibitions which are worth a visit if you get the chance.
At the beginning of the year Charlotte (@englishgirlathome) and Carmen (@carmencitablog) announced there was to be another Paris Sewcial in May. It was a free-to-attend event, you just needed to get yourself there and book your own accommodation. The previous one was four years ago and at the time I was just getting started on IG and barely knew anyone, although I do remember seeing pictures pop up on my feed. This time a group of us were keen to go together and the super-efficient Claire Sews got us all organised with trains and hotels so we were soon good to go!
Six of us met at London St Pancras early on Friday morning and took the Eurostar direct to Gare du Nord, it was a short 15 minute walk to our hotel near Sacre Coeur and Montmartre from there. Although our rooms were definitely compact and bijoux I was delighted to discover mine had a modest view of the Eiffel Tower! [it was better in reality than it appears in my photo incidentally] I was soundly mocked by my companions but I think they were just jealous of my room with a glimpse.
I was keen not to spend my whole time in Paris inside shops no matter how appealing the fabric was, and it was a first visit for Kara, so we took the opportunity along with Salva to get the hop-on hop-off bus which visited all the major sites in the city. Cue a few photos of Parisian landmarks…
In the evening we were joined by two more companions so the eight of us went to supper at a restaurant nearby and had a very jolly evening.
The grand meet-up commenced at approximately 11am the next day so after a delightful breakfast at a little cafe we arrived to find a huge group of our fellow sewers at the foot of the steps in front of Sacre Coeur. It was SO lovely to see so many people there, Charlotte’s patient partner Phil took a group shot of us all together before we eventually and gradually dispersed to the fabric shops which are very close by.
There are lots of fabrics shops grouped close together in the area and many of them specialise in a method of selling which I hadn’t encountered before. The fabric is grouped in fibre type so linen, silks, woollens, viscoses etc plus cottons were sub-divided into fabric type like denim or double-gauze but everything is cut into 3 metre lengths and folded on end. It sounds complex but it isn’t, you have to not be a neat-freak. It’s called ‘coupons’ and I thought it was a very good way of selling because 3 metres is plenty to make many items of clothing like a dress or a coat perhaps, although admittedly too much for some, you could always share with someone else provided you were agreed on the colour! It means you don’t have to find a member of staff to cut your fabric, they don’t need tables to cut on either. It needs to be kept tidy but I found it an enjoyable and novel way to fabric shop. I bought fabric in Les Coupons de St Pierre, Sacres Coupons and Tissus Molines but there are quite a few others close by too. There are still traditional shops too where the fabric is on the roll and staff will cut your chosen quantity, plus some stores selling haberdashery, trims and buttons etc.
Eventually we were pretty much shopped out and in need of sustenance so the groups dispersed to various restaurants for lunch.
In the afternoon many of us carried on to a pop-up shop where DP studio patterns were selling off ex-sample fabrics and dead stock at very low prices, as well as their own patterns. A few carried on still further to Make my Lemonade and a few other shops but some of us were pretty pooped by now so we headed back to the hotel with our swag.
Later in the evening many of us travelled across town to a restaurant where a meal and entertainment had been laid on for us. Unfortunately the Parisian liking for late eating didn’t suit everyone after such a long and tiring day and we were all quite keen to head to our beds in the end.
After brunch on Sunday morning a fairly large group went to visit the Yves St Laurent museum at 5, avenue Marceau. As you know I love a good fashion exhibition and this was no exception, the entrance fee is €10 which I thought was pretty reasonable. It isn’t that large but there are quite a number of gowns and outfits on show, as well the studio in which YSL used to work for around 30 years. It was also an opportunity to actually chat with fellow Sewcialists without it being too noisy or fabric purchasing being our primary occupation.
The first salon was dedicated to the famous Mondrian dress with many of its iterations including Barbie and Marge Simpson, and unwearable suggestions for eye makeup.
In the other salons were various YSL outfits from past collections.
The studio in which St Laurent created for over 30 years was a beautiful bright, light-filled space with many artefacts which made it feel as though he had merely stepped out of the room for a moment.
There is, of course, a modest and tasteful book and gift shop at the exit although I resisted the urge to buy anything else.
After leaving the museum we all headed in various directions, avenue Marceau is very near the river with its wonderful view of the Eiffel Tower. We indulged in crepes from a vendor after which we set off for the Musee D’Orsay with a very pleasant stroll along the Left Bank of the Seine-fortunately the very threatening sky never did come to anything.
There was quite a long queue at the D’Orsay but we Brits are good at that and the time passed while we chatted. Inside was crowded so we went straight to the top floor where the Impressionist artists are housed. Amongst the painting we spotted these sewing/crocheting beauties which seem particularly appropriate, plus two favourites of mine.
We finished the day with supper back in the Montmartre area, plus the most beautiful ice cream I have ever eaten. We worked them off by climbing right up the hill to Sacre Coeur!
What did I buy did you say?? I was super-restrained and chose several plains and a classic stripe, plus an unusual print lining and a remnant with a fish design. I spent less than €100 in total which I’m happy with for the quality of fabrics that I bought.
And then it was time to come home again…Carmen joined us for breakfast on our last morning which gave us a chance to thank her (again) for instigating/organising the whole event.
Even on the Eurostar home we still had lots to talk, and laugh, about and we all agreed that there had to be another Paris Sewcial in the future. Thank you again Charlotte and Carmen for having the idea in the first place-it was brilliant and such a delight to meet so many diverse yet like-minded people.
I’m really happy with this make, it’s the Dawson Coatigan by The Thrifty Stitcher, Claire-Louise Hardie, which I made in Navy Ponte Roma given to me by Minerva Crafts in return for an honest review.
This pattern was released just before Christmas and I think it would be a useful addition to any wardrobe. It’s a softly tailored edge to edge coat with flattering seam lines and integral pockets. It works well in a structured jersey like Ponte Roma, and it would also look good in boiled wool or felted wool.
And depending when you’re reading this the Dawson also qualifies for the Sew Over 50 #so50Visible challenge too which finishes on March 15th. Read my previous blog posts for all the details on that but you haven’t got long if you hope to win one of the prizes!
There’s lots more details and photos of my make over on the Minerva Crafts website, thank you as always to them for providing me with the fabric.
It’s always nice to be asked isn’t it? Doesn’t especially matter what but anyway, it is. So when I was asked if I would help in the testing process of TATB’s new pattern for a jacket/coat to be released in the spring I was both flattered and happy to help.
I know I have a regular moan about some Indie pattern designers but TATB are one of those who I think do a very good job. The presentation (recently with refreshed new look packaging) and the quality of the drafting and the instructions is, in my opinion, of a very good standard. Tilly doesn’t usually chuck out loads of patterns one after another, they are often in pairs and spaced out through the year.
As is quite often the case with testing there was originally a fairly tight turnaround to return feedback so my first problem was to source the fabric, and quickly. I’m not a great one for buying fabric online unless I’m confident the description and other information is accurate, or I know exactly what it is. This time though I didn’t have time to explore my regular fabric shopping haunts in London and so I had to search t’internet to see what I could find. I’d hoped to get some kind of waterproof or waxed fabric but the ones I found were either very expensive, too boring, too childish (a lot of dinosaurs and unicorns!) or not suitable for the purpose. Next I looked at wool and wool-blends and many of these were also much too expensive as well but in the end I found a really nice felted wool from FabWorksOnline so I ordered that. I was very impressed with the speed it arrived too! It’s a fully lined jacket and I’d got some silky pale pink cloque in the old stash which I didn’t think I’d use for anything else, and I had a cream-coloured open-ended zip which I thought ‘that’ll do’ so I was good to go. One version of Eden is lined with jersey, you might want to consider putting a silky lining in the sleeves, although you could still put jersey just at the cuff ends if you want the contrast roll-up effect.
After a bit of a hold up the pattern arrived but when it did I hit the ground running. In all of Tilly’s other patterns I make myself a size 5 but after checking the finished measurements for the jacket I opted for a 4 this time.
I’m not going to give you a verbatim run through of the pattern here, this time I’ll highlight areas where I used specific techniques which I think work well for this kind of garment.
There are two style variations of the Eden, either a simple longer-length duffle coat style with toggles, or a shorter jacket with ’storm flaps’ and bellows pockets which is the one I opted for. We were asked not to make any drastic pattern hacks during testing but I chose to add 5cms to the overall length of the shorter style, it was shorter than I would wear it but the other was too long.
The next thing I did differently was to use the lining fabric on the underside of the flaps instead of the wool, to reduce the bulk of them when they go into the seams. If you’re using a thinner fabric this step isn’t so necessary but I knew that once all those thicknesses were layered up into the sleeve seams it would because very bulky.
The next thing I changed (and which hasn’t been altered on the final pattern) is the shaping at the cuff of the sleeve. This is because if you have a deep turn-back but the sleeve continues down straight ie. getting narrower all the way down, when you fold it back it doesn’t lie flat against the inside of the sleeve seam. Look at the photos below and you’ll see what I mean.
My other suggestion for the cuff is to use a strip of iron-on interfacing to stop it from stretching, being baggy and to give it some body. This is a technique I’ve picked up after doing numerous sleeve-shortening alterations for people because this is what you will commonly find inside RTW coats and jackets to stabilise it.
I’ve also learned from doing alterations that a few hand stitches inside the cuffs, and also the lower coat hem facing will help hold them in position so that they don’t drop down and spoil the look of your finished jacket. It’s tricky to describe what sort of stitch this should be, it’s a kind of slip-stitch a bit like you might find on handmade curtain hems. The sleeves are raglan so they are easy to insert.
The instructions for putting the zip in are good and the photos are a help here too-there will be an online tutorial although at the time of writing this I’m not sure if it’s available yet. Putting the lining in isn’t actually that complex but it does take time and concentration, and a bit of brute force. Don’t make the opening in the sleeve lining too small because it will make it very difficult to pull everything through, especially if you have stiff or thick fabrics. The gap gets sewn up and is then down inside the sleeve eventually any way. If you’re in any doubt about accomplishing this part my suggestion would be to get the lining sewn by machine to the edges around the front (zip) and hem, pull the lining through and then slip hem the lining to the cuffs by hand.
I chickened out of putting snaps on my jacket even though they would look nice. I haven’t used them on anything else and I didn’t want to spoil my Eden so near the finish line! I opted instead for very large silver press studs which I sewed on by hand.
I finished my Eden in December and I’m really pleased to say that I have worn it loads over the winter months. I’m very happy with my size decision too because there is still plenty of room for jumpers to layer up underneath, I think the next size up would have been too big. I also think the grey and pink look really pretty together as well.
I hope you find the techniques I’ve mentioned helpful, although I don’t think they were carried through to the final pattern, TATB obviously felt that their own methods and descriptions were good enough and maybe I’ve over-complicated things but overall I’m happy with the finished garment. It’s categorised as for ‘improvers’ and I think this is a fair analysis, it would be too complex for a novice sewer although with online tutorials and determination anything is possible!
As you can see from my photos my colour palette is a little more ‘mature’ shall we say than the TATB samples but I think that also proves that it’s a nice casual style which will actually work in lots of fabric and colour combinations. I enjoy the process of testing although there are times when it’s frustrating, I assume I’ve been approached because of what my experience can bring to the party and that isn’t always borne out in the end but it can be rewarding and personally I always take a lot of time over it and try to use my skills and experience to help, advise and improve when possible. I probably won’t be asked again now so I hope you find this post helpful…
The last few weeks on the blog have been very much about Sew Over 50 which has all been very exciting but that has meant that I haven’t had as much time to write about the other things which interest me a lot.
If you’ve been reading my blog for a while you’ll know that I’m really interested in the history of fashion and so visiting exhibitions of clothing from across the decades, or even centuries, is something I love to do. Living where I do I’m fortunate to be well placed to get into central London in less than an hour making most galleries and museums very accessible.
London’s blockbuster fashion exhibition this spring is Dior: Designer of Dreams which opened at the beginning of February in the V&A in South Kensington and it is such a beautiful show with literally hundreds of outfits on display. It’s being staged in their newest space, the Sainsbury Wing, which is underground but doesn’t feel remotely subterranean when you’re in it. Each room is different and begins with the single most famous outfit of all, the Bar suit from the first ‘New Look’ collection of February 1947. Nearby are other interpretations of it by the designers who followed Dior himself as head of the house which he created.
The show is thematic rather than chronological which personally I think makes it more coherent, not less. Whilst each designer has brought their own aesthetic to the label there is an element of timelessness about many of the creations. [It’s quite a fun game to see if you can work out which era a gown comes from, I was wrong a number of times, sometimes I went modern and they were from the 50’s and other times the opposite was true] The show takes you through a series of rooms which contain gowns of every shape and hue. Early on you come across the gown created for Princess Margaret for her 21st birthday ball in 1951. She and her mother continued to be Dior fans even after Princess Elizabeth became Queen in 1952, she herself has only ever worn British designers since.
The rooms are cleverly arranged because you move from one to the next and they all feel quite spacious and different to the previous one, some have dark backgrounds whilst others are light and airy. Some gowns are behind glass but many are not so you can get a good view of the exquisite workmanship and skills that have gone into each of them.
When he was alive Christian Dior made full use of the allure of Hollywood film stars to promote his collections and he dressed many leading ladies including Rita Hayworth and Jane Russell, their shapely figures were perfect for showing off his womanly designs. In fact Coco Chanel was very critical of his New Look because she saw it as a step backwards for women in terms of having to wear restrictive garments like corsets again, this coming after the relative freedom she had created with her boyish shapes in the pre-war years.
The pastel colours in the next room are beautifully lit and there are gowns by many of the designers who have come after Christian himself including the 21 year old prodigy Yves Saint Laurent, John Galliano, Raf Simons and Maria Grazia Chiuri. I loved this room…
Moving on from this room to the next there is a marked contrast with the gowns or ensembles being influenced by or referencing travel around the world. Several of John Galliano’s most fantastical creations are here alongside more wearable dresses by the other designers.
At various points there are also smaller cabinets and display cases containing other items of interest including beautiful perfume bottles, and photographs from Christian Dior’s beloved garden.
I actually wish that perfume had been wafted into this room to enhance the beautiful ambience…a hint of Miss Dior perhaps (named for his sister Catherine) or the scent of lily of the valley from Diorissimo?
The talents of all the Creative Directors are show-cased in the next room starting with Yves Saint Laurent’s brief tenure (he left to do his National Service in the army) Marc Bohan who served for the longest time and is still alive at the age of 93. After him came Italian Gianfranco Ferre followed by the notorious and flamboyant Gibraltarian John Galliano. When his reign ended abruptly under a cloud he was eventually followed by Belgian Raf Simons, and finally the first woman to hold the role, Italian Maria Grazia Chiuri.
The next room is of particular interest to keen dressmakers because it is entirely filled with toiles of gowns, jackets and ensembles. It’s snowy whiteness is a stark contrast to all the bright colours and embellishment in the previous rooms and it heightens the drama of the superlative cutting and construction skills of the all-too-often unsung atelier staff or ‘petit mains’ as they are usually known. These are where the ideas are tried out, where the unusual cut of a sleeve is experimented with, or a dart on a collar attempted. It doesn’t waste costly and precious fabric and it helps visualise unusual proportions or new concepts. These toiles are about way more than just checking the fit on a garment.
Moving next through a narrow space displaying hundreds of magazine covers over the decades featuring Dior fashions old and new on one side, and a glass cabinet on the other side containing many shoes, bags, scarves, jewellery and other accessories and miniature versions of gowns and ensembles perfect in every detail like the full-size originals.
And finally you arrive at the best room of all. I had no idea what was coming so to round the corner and emerge into a huge ballroom space with lighting, music and special effects was breathtaking to say the least. There are literally dozens of gowns to look at, including three iterations of the J’Adore gowns worn by Charlize Theron in the perfume adverts.
You need to spend as long as you can in this room to fully experience it, there are places to sit too so you can rest and take it all in.
There’s only one more gown to see before you leave and it’s set between mirrors so you get the sense that there are many dresses, not just one.
I absolutely love this exhibition! I’ve been able to go twice so far, as well as attend a talk between exhibition curator Oriale Cullen and Harper’s Bazaar editor Justine Picardie. As I keep mentioning in other posts, I’ve had such good value from my Membership of the V&A and this year will be no different. In April a retrospective of the work of Mary Quant also opens too. I purchased my own membership and all views expressed here are entirely my own.
You have until July 14th to see this exhibition and if you have any chance of being in London I urge you to try and get a ticket. I believe there are 500 additional tickets available every day but they sell out very quickly, check the website for updates would be my suggestion. I hope I’ve been able to give those of you who can’t get to London a small taste of the show, and for those of you who hope to get here my photos in no way do it justice and you’ve definitely got a lot to look forward to!
Finally I can talk about the day last November when a group of us travelled to Love Sewing magazine headquarters in Stockport to take part in a photoshoot for a Sew Over 50 article.
Sew Over 50 had begun in August and was gaining a huge following so when editor Amy asked if we could suggest possible models for an article Judith and I approached quite a large diverse group of women initially to see who might be willing or able to travel to Stockport. Not everyone could but eventually we had a group of 10 people.
It was amazing how far some were willing to travel, Corrie and Sara both came from Wales, Judith is usually in Edinburgh and myself, Ruth and Sue were all travelling from Hertfordshire. So the 3 of us decided it would be a good idea to drive to Milton Keynes first and then get the train the rest of the way. Simple? far from it! I checked before booking the train that there was a car park, not pre-bookable unfortunately, but it was a large car park so what could possibly go wrong….Well it turned out that the car park was completely full [and no sign or barrier telling you that before going in and driving all the way to the top floor and down again thus wasting 10 precious minutes] we spent another 15 fruitless minutes driving around and around trying to find ANY alternative until the only possible option was for me to drop Ruth off at the station with her train ticket (and Sue’s too because she wasn’t with us, we didn’t know where she was at that point, probably still driving around too!) Anyway, in the end I drove all the way to Stockport because I was bloody determined that after all the planning I wasn’t going to miss the event! Rant over.
By the time I got there everyone was chatting away happily, having make up applied, there was a rail full of everyone’s beautiful makes which they had carefully selected to bring. Amy was in the process of grouping the clothes into colour stories and you can see from the eventual photos that it was almost like we had planned it that way. A few of us have met before in real life but for others it was new experience-they had all had a bite of lunch together before I got there-but naturally chatting didn’t prove too difficult anyway. I’ve been fortunate enough to have a Love Sewing photoshoot before so I knew what to expect, this time it was so lovely to have company. Amy hasn’t had this number of ‘models’ to deal with before and I think it was a bit like herding cats at times haha.
Getting any of us to stand still or stop talking long enough to take photos was an achievement in itself, there were probably a few blurred ones, but we settled into it and I think Amy was happy with the results eventually. Incidentally, I’m wearing my Trend Patterns Asymmetric Dress which I reviewed here.
Eventually after we’d all done our group story shots we had a final altogether group when we all piled into the slightly wobbly set with Amy. It’s astonishing that there are any pictures with all of us looking in the right direction with eyes open and mouths shut!
So after all our fun and games the time came for us to head home again. Sadly for me this meant a really long drive but this was made much more bearable by the fact that Ruth came in the car with me so her company made 4 hours pass a lot quicker than the lonely journey up. We have a WhatsApp group with all of us in it and we’ve had many conversations since and we’ve been looking forward to the release of the magazine so that we can share it with everyone.
You’ll know by now too that it coincides with our first SewOver50 challenge so the article will give lots more exposure to that. [If you don’t know what I’m talking about, where have you been? To briefly recap, the aim is to make a garment using a pattern which features a model on the envelope who appears to be at least 45-50 years old. This isn’t as straightforward as it sounds so check my previous two posts here and here which has links to a wide selection that we’ve managed to find. There’s a very disappointing number of patterns from the major pattern companies and whilst the article names McCalls and Simplicity, in truth we could only find about 4 patterns from Simplicity and none from McCalls] Between us on the day we wore a very diverse selection of patterns, from mainstream and independent designers, made in all sorts of fabrics, colours and designs which illustrates the point that whilst we may be getting older we aren’t going to let age get in the way of our sartorial choices or be dictated to by what ’society’ expects us to wear. This is in spite of how pattern companies continue to portray us, their clientele, and until they address how diverse everyone actually is we still have to continue to look beyond the envelope.
Amy’s team looked after us so well and speaking personally I had so much fun being together with my fellow dressmakers Judith, Corrie, Sara, Sue, Sarah, Di, Ruth, Jeanette and Kate (even though it was shorter than I would have wanted!) Many of the informal photos you see here are my own but some belong to one or more of my fellow models so I am indebted to them for their use here.
The magazine arrives on subscribers doormats on February 16th and in the shops from February 21st. In the meantime, have you started your #so50Visible make yet…?
Incidentally, we received no payment for the article and the comments made in it were in response to questions we were asked. All views expressed in this post however are entirely my own.
Well what an amazing start the challenge has got off too!
I think the reception has so far exceeded anything Judith and I had hoped for-many of you have embraced the concept we’ve created and are looking with enthusiasm (and frustration too) for patterns featuring an older or more age-appropriate model.
It also means that lots of you have made suggestions for pattern companies from all over the world that we haven’t encountered before so that the list has now got quite a bit longer. We’ve had more offers of prizes too!
Rather than edit the first blog constantly I’ve created a further list here with links to all the extra companies for you. This is still unlikely to be a definitive list though. I’ve gone through every suggestion that we’ve been given up to this point but I haven’t necessarily shared them because sometimes I’ve felt they don’t meet our criteria sufficiently and (heaven forbid) they may just see us as a free marketing opportunity.
Liesl+Co, Maria Denmark and Ann Normandy all feature slightly more mature models but we either know or don’t think they are quite in the 45-50 bracket yet. Still, definitely in the right direction and representing us much better, the patterns are cut for a more mature figure too which is so helpful. Ann Normandy has generously offered a prize anyway.
You have been sharing plenty of photos on Instagram using the hashtag #so50Visible telling us of your plans, and realising the frustrations of finding patterns which represents our age group properly. I was recommended to look at one pattern company (which I won’t name) where I discovered at least two patterns which were modelled by a woman of no more than 30 wearing an outfit and shoes which was clearly designed for a woman about three times her age! talk about Granny clothes, poor girl, and why would that induce a woman of mature years and very conservative tastes want to say “hey, that’s exactly the way I’m going to look when I make those garments”, I’m guessing it won’t.
Which brings me to another point-sometimes it’s gone too far the other way, pattern companies think older sewers want boring, sensible clothes all the time. We don’t!! What many of us have realised is that we are, indeed have to be, capable of looking beyond the face (and figure?) of the model on the envelope all the time in order to visualise the finished garment. This is when accurate line drawings are vital to be able to assess the ‘bones’ of the garment and know whether it will work for us.
Two areas which have been under discussion (separately) in recent weeks (and I’m not going to attempt to address all of it here) is people of colour who sew and larger sizes. In the process of going laboriously through these pattern companies I have seen that there is a modest use of POC as models, but very very few larger models. However many of these companies do sell patterns which go up in some cases to very large sizes, and which are modelled, I’m presuming by their testers, but these are only used in website images.
If you follow the hashtag you can keep up with everybody’s posts, Judith regularly shares them too on the @sewover50 account, the more often you ‘like’ a post the most often the algorithm will push the account up your feed, or you can set the post notifications to alert you whenever there’s a new post. There are now additional prizes which will be allocated completely at random at the end which are from The Sewing Revival, Designer Stitch, The Thrifty Stitcher, Winter Wear Designs and Ann Normandy.
So that’s my little update for you, another rabbit hole to fall down, or maybe you’re already on the case with a new pattern? Remember that you don’t have to share a new garment if you’ve already made something which qualifies, we want to see everything. Judith and I aren’t naive because we realise we are giving pattern companies free publicity at the moment and disappointingly a few of them haven’t acknowledged the challenge is even happening. There may be good reasons for this, or maybe they still think they don’t need to work to attract our area of the market? Remember #NoLikeNoMention!
I think as a by-product of the challenge many of you are also finding inspiring new accounts to follow on Instagram, it’s really lovely to know that there are so many of us sewing away in our various parts of the world. Dressmaking can be a solitary activity and speaking personally it makes me feel more connected by a shared activity. We want Sew Over 50 to be a positive and supportive space where we can share and chat and get advice whenever we need it.
Thank you for joining in and keep those makes coming!
Usually when I write a Simple Sew blog post it’s a garment for me but this time the finished article is for my friend Janet. We had a shopping trip to London’s Goldhawk Road a little while ago to choose fabric for a dress for Janet’s daughter to wear to a family wedding and while we were in Classic Textiles we got distracted and spotted this lovely pastel tweed. There wasn’t a lot left so she snapped it all up as well as some pretty matching lining, we didn’t have a pattern in mind but I knew I’d have something suitable at home.
The jacket got put on the back-burner for a few months because I had the dress for the wedding to make first, and then a last minute dress for Janet herself to wear too so it dropped down the priorities.
With the wedding out of the way in August I could revisit the project. Because there wasn’t a lot of fabric and there could be tricky pattern matching to do I didn’t want a pattern that was too complex with a lot of pieces so when I found the Notch Collar jacket I thought it would be perfect.
If you’re going to make this jacket yourself I would say it’s VITAL to make a toile first. In my opinion it’s quite narrow across the front and shoulders so if you’re fuller-busted you will probably need to do an FBA. With this in mind I was really pleased, and a bit surprised, when the toile fitted Janet perfectly with no alterations but then she is quite petite build.
If you read my pattern reviews regularly you’ll know that I’m not usually a ‘tracer’ but because Janet is so much smaller than me, and I may want to use the pattern again sometime, I opted to trace this one. If you’re short of fabric or if it’s going to be tricky pattern matching it can be really helpful to make pairs of any pieces that require 2 eg. Left front and right front, a pair of sleeves or the whole back rather than just place on a fold. In this case though I folded the fabric carefully in half and pinned in numerous places through the fabric so that I knew the checks were matching on the under layer.
Because of the wide width of the fabric I could easily place the front and back side by side so I knew that the check would match down the side seam as far as possible. Because of the dart it wouldn’t match near the underarm seam though, this is inevitable.
I didn’t cut out the sleeves in tweed at this stage. I cut everything out in lining too with the addition of a pleat of extra fabric in the back to allow for movement. I also cut facings which incidentally I’d made a lot wider than the originals-I think they are too narrow. [later on I discovered that there’s no lower back facing piece and very little hem allowed to turn it up either. I made my own by tracing the lower edge of the back pattern up to the same depth as my front facings-8cms-so that they match when joined at the side seams.]
To stabilise the tweed and give it some extra body I interlined the fronts and back with some calico and basted it to the tweed within the seam allowances around the edges. This is known as ‘mounting’ the fabric and is a very useful technique if you have a fabric that needs stabilising or a little more body for some reason.
I immediately disagreed with the instructions here because, after making the darts, the first thing I would do is make the pockets and sew them on. Because the fabric frays quite a bit I opted to use some lining as well as the facing to ‘bag out’ the pockets. This makes them more stable as well as neater. After matching the checks I top-stitched them on but that pushed everything out of alignment so I ripped that stitching out and hand-sewed them on instead. These aren’t pockets that will need to take a lot of weight so they should be plenty strong enough.
After joining the shoulders and side seams I pressed the seams open with plenty of steam over my tailor’s ham and gave them a good bashing with my wooden clapper to knock the steam out and flatten the the seams effectively. I used it on the darts too. If you don’t have a clapper you could use a wooden rolling pin if you have one.
Things got trickier after this because I had to match the sleeves to the checks of the jacket. Initially I did this by lining up the pattern piece again the jacket on the stand and drew some guide lines onto the pattern. I was reasonably sure this would work so I cut out a pair of sleeves…I was wrong. I’d placed the pattern piece onto the fabric but it was matched to the wrong set of stripes. Damn and blast! Fortunately, I still had enough fabric left for another pair of sleeves and I could cut the front facings out of the incorrect sleeves instead.
I tried a different approach to matching the sleeves. I took the whole piece of remaining fabric and offered it up to the jacket armhole on the stand where I pinned it in position. This seemed to work so I carefully thread traced the crown of the sleeve, removed the fabric again and then laid the pattern piece on top.
Obviously I needed a second sleeve so I had to cut the first one, remove the pattern, place it in the correct position for that sleeve to match and cut it out. If I got this one wrong there was no Plan C…. I’m extremely relieved to say that all was well-phew. One of the benefits of the tweed is that you can make the slightly loose weave work in your favour so I ran the usual two rows of ease stiches around the crown and tacked the sleeves into position.
One fitted perfectly first time and the other I had to reduce the amount of fullness over the crown to make it fit, and still have the checks matching. At this point Janet popped round for a fitting and we were both very relieved that it fitted really well-high fives all round.
One tip I’d give as a result of doing quite a few alterations on coats and jackets is to use a wide strip of iron-on interfacing at the cuff to give it a crisp edge.
iron on interfacing
cuffs tacked up in position
This is the sort of soft-tailored jacket which will benefit from a small shoulder pad. We aren’t talking ‘Dynasty’ or ‘Dallas’ 80’s shoulders here, just enough to give a little more definition to the shoulder-line. I didn’t have anything suitable so I made a pair with some medium thickness wadding and covered them in fine calico.
To line the jacket next, I interfaced the facings with iron-on Vilene and neatened the edges, then I stitched them wrong sides to right sides on the lining pieces.
I made up the lining as a complete unit-fronts/back/sleeves-which in hindsight wasn’t the right order because after I sewed the jacket and the lining together all the way around the outer edge it meant I couldn’t under-stitch any of it. I should have sewn the lining in without the sleeves attached, under-stitched the neck edge first then attached the sleeve linings afterwards. Instead, I pulled everything through right side out and gave the neck edges a jolly good steam and wallop with the clapper again. Then I ‘stab stitched’ the edges of the front and neck edge by hand, and also a few stitches directly through the lower section of each side seam to keep the two layers fixed together. Finally, I slip-hemmed the sleeve linings in place.
As I said before this is a ‘soft-tailored’ jacket rather than a very structured one, although I’ve used one or two techniques which I picked up on the tailoring course I did two and a half years ago.
The sparse making up instructions do have a few errors or anomalies which could trip you up. I set the sleeves in rather than on the flat which might not make any difference to the overall finish but the lack of lower back facing or sufficient turn up instead isn’t good, and it says there’s a turn up of 5mm on the cuffs when it’s actually 1.5cms, and in fact 4cms is what I used to give a better finish. I know some of the earlier Simple Sew patterns have a few technical errors and this is one of them but, with this in mind, don’t dismiss it because it’s an attractive little edge-to-edge jacket but make a toile first!
I relieved to say that Janet is very pleased with her jacket and hopefully will get a lot of wear from it.