women’s clothing

A return to blogging with a Kingfisher top from The Sewing Revival

~ Susan Young Sewing ~ 4 Comments

There’s been quite a lull in my sewing and blogging of late due to a distinct lack of motivation and generally feeling meh about everything. I don’t know about you but I’m utterly cheesed off with the persistence of the ‘Rona and, whilst I really try to find the positives as much as I can, there comes a time when I’m all out of good thoughts.

Anyhoo, I’ve finally managed to get my act together and to cut out and sew something which is worth blogging about!

You’ll know I use The Sewing Revival patterns a lot, and especially because they are SewOver50-friendly in their representation. Janine kindly offered me a copy of the new and improved Kingfisher top recently so here are my thoughts on it. The original version was one of the first in the Sewing Revival collection and it now features extra variations including 3 sleeve lengths and additional ruffles and frills to gussy it up.

Initially I’d settled on using a length of fabric I bought recently but in the end, whilst searching-sorry-shopping, my stash I came across a length of batik-printed lightweight cotton which had originally been a dress. I bought it as a remnant which was in two different-sized pieces pieces so I joined them right across the weft to make it useable. From that I turned it into a simple ‘pillowcase’ dress with a gathered drawstring top and hemmed at the bottom. Needless to say, this being England, I didn’t get a massive amount of wear from it because our climate is so unreliable. Sadly I don’t seem to have a photo of it now so you’ll just have to believe me.

The Kingfisher has raglan sleeves which are always so nice to make because they are simple and quick to construct. One of The Sewing Revival’s trademarks is to mix a stretch neck band, cuffs or hem with a woven fabric and this top features a ribbed, rounded neck band. But first I had to get all the pieces out of a length of fabric with a join across it at about 50cms in, plus a tear at right angles to the selvedge in another place AND a small hole just near that! I calculated that I could get a pair of 3/4 length sleeves but one would have to have the seam running horizontally across it. Another new feature of the Kingfisher is additional small ruffles to add so, instead of placing them vertically on the sleeves, I opted to cover the seam with horizontal ruffles, that way way both sleeves would look the same. After a bit of pattern Tetris I got everything I needed out including the ruffles. I started by making the sleeves.

Inside the sleeve with the exisiting join running horizontally

Because of the limitations of the fabric the ruffles were only 5cms wide so, in order to lose as little of their width as possible, I finished each edge with a rolled-hem finish on the overlocker. Check your instruction booklet because I’m sure many models will offer this feature, it will involve a few simple adjustments to the settings to achieve. A rolled hem is a quick and attractive way of neatening fine or lightweight fabrics when you can’t afford to lose too much off the edges.

Each ruffle was cut twice as long as the width of the sleeve because the fabric is quite fine and will gather up well. If you are limited for fabric (mine were cut on the straight grain) or if your fabric is quite stiff or thick, then 1.5x the width will be fine. I sewed a rolled hem on both edges of the sleeve ruffles and then ran two rows of a long gathering stitch along the centre line. Make sure the gathers are evenly distributed before sewing the ruffle down, I used a zigzag stitch to sew the ruffle in place.

I created a cuff to finish the sleeve ends by cutting two pieces of fabric from along the selvedge and sewing them on. My original plan was to create an elasticated cuff using a casing but then inspiration struck(!) and I sewed three rows of shirring instead.

Shirring works best on lighter-weight fabrics such as soft cotton-types [lawn, batiste, voile, Swiss Dot, pique, poplin if it isn’t too stiff] also most viscose/rayons, many silks, and fine woollens such as challis. This isn’t a definitive list by any means, basically nothing too thick, or stiff or overly ‘bouncy’. As with anything you’re unsure about I’d strongly suggest sewing a few samples first to see how it goes.

To begin (and these are very much my own thoughts on shirring, you will find many others which might vary to these-trial and error before you start is the best plan of action) you ideally need a bare minimum of 1.5x the eventual finished measurement but as a rule of thumb I would say at least 2 or 2.5x your finished measurement, especially if the fabric is very fine. I also wrote advice on shirring the back of a sundress in a previous blog post which you can still read here.

Gently wind shirring elastic onto your bobbin by hand, do not stretch it as you wind, you will use regular sewing thread on the top as normal. Set your stitch length as long as possible and, sewing on the right side of the work, make sure you backstitch at the start to secure your threads then sew your first row of stitching. Do not backstitch at the end of the row, carefully remove the sewing by gently pulling the elastic out so that there’s enough to tie off the ends eventually. Repeat by sewing parallel to the first row of stitch as many times as you require, I’ve just done three for the cuff. You could draw on the lines using a marker pen or chalk if it will help, I just keep the edge of the foot in line with the previous row of stitching. The work will gradually start to pucker up as you increase the rows. The photo above shows you what it looks like on the reverse.
This is the right side of the cuff, wherever possible work with the fabric flat and then joint it in a seam or to the next piece it’s connected with. It won’t be gathered up enough to start with so hover your hot iron with plenty of steam over the area and it will pucker up a lot more. When it’s gathered as much as it’s going to tie off or backstitch the threads/elastic to secure.
In the photo above, the top cuff is before the steam was applied and the lower cuff is afterwards, you should be able to see that the stitching is a fair bit tighter-looking.
Next I added small ruffles to the front raglan seams, also neatened with the rolled hem finish just on one edge. The rest of the Kingfisher was very straightforward, the ribbing band went on neatly and gives the neckline a nice finish. You could also use bias binding or make facings if you don’t want to deal with stretch but I like it like this.
Close-up of the finished neckline, I think I bought the navy ribbing from Lamazi Fabrics a little while ago.
Sleeve ruffle

I cut this top in a UK10 so it’s a closer fit than some tops I’ve generally made but I’m really happy with the fit, there’s still ample room for comfort and movement. From a fabric that was languishing in a box I’ve concocted a casual top I can wear in warmer or cooler weather.

Thank you to Janine for providing me with the pattern, I hope my review will be helpful, for a such a simple shape there are so many possibilities with it. If you haven’t tried any Sewing Revival patterns I’d definitely suggest you pop over there and take a look, and if you choose to follow any link I’ve created in this post or previous TSR ones, and you then make a purchase, I will receive a modest fee from it. You can also read my previous reviews for the Sidewinder pants, the Heron dress plus a hack, the Bellbird top and the Fantail top and it’s follow-up. If you want any more inspiration use the hashtag #KingfisherTop on Instagram or Facebook. I’ve got plans for a deep-cuff version later in the year, just so long as I don’t have another creative slump…!

Welcome back and thanks for reading this far, I’ll try not to leave it so long next time!

Until then, keep sewing!

Sue

New Trend pattern TPC26 plus tips for handling a tricky fabric.

~ Susan Young Sewing ~ 7 Comments

Firstly, I probably need to give you a quick explanation of why I’m making a fancy frock during the lockdown because it must seem rather incongruous.

This is my first post as a Lamazi Fabrics blogger and before the Covid-19 pandemic reared it’s ugly head I had offered to make an outfit using a slightly ‘tricky’ fabric in order to share a few hints and tips for sewing with it. I selected the beautiful Tencel/Cupro ‘Bark’ fabric in Lavender because we were going to a wedding in late May which would be the perfect chance to make a something using this special fabric. Very sadly that wedding is now postponed indefinitely but I’m making the dress because I’ll still need something to wear when it’s rescheduled. 

The fabric has a lovely weight and handle which makes it drape really well. It’s has a bark-like finish and is different on each side, you could use this to your advantage if you want to create an interesting visual effect by having some pieces with one side out and some using the reverse side. 

I made life harder for myself by choosing the new Bias T-shirt Dress by Trend patterns (generously gifted to me by them) in which EVERY piece except the sleeves are singles and strange shapes which means you cut everything out on a single layer of fabric right side up (RSU). Unlike most patterns, when you are cutting pairs of parts you can usually flip a piece without too much difficulty, however if you do that for a piece which must be cut RSU you would have completely reversed the print/design to the wrong side when you try to sew it up. This Tencel/Cupro has a nice look whichever side you use but my advice is to be really careful on printed fabrics before reversing any piece labelled RSU. 

Next, when cutting slippery or fluid fabrics (unless you have a lovely big cutting table) you’ll need to handle them as little as possible (by which I mean pulling them about to get them into position) which might be easier said than done. I know that cutting out is most people’s least favourite part of sewing but it’s so important to take time and care at this stage. If you’re cutting out on a table with straight sides use the edges as a visual marker to get the end of your cloth at a right angle to start with, ensure the weft (across the fabric) is nice and straight as well as the warp, pull a few threads to find the grain if necessary. If you have more cloth than will fit on the table in one go you could try having the excess rolled on a cardboard tube if you have one to keep it under control rather than sliding off the table all the time. 

Because my pattern has large awkward-shaped pieces cut from a single layer I had no option but to cut out on the floor! This can be physically quite tiring so you might want to get help if you need to. This is slippy slidey fabric so an extra pair of hands could help you lay it up nice and straight, again, rolling the fabric onto a long cardboard tube would also help keep the fabric taut and straight as you lay it out on the floor. This is not a fabric to use weights and a rotary cutter on unless the whole lot fits onto a cutting board without disturbing the fabric, if you’re spending time laying up the fabric carefully so that the grain lines are straight in both (warp and weft) directions you can’t then mess it about shifting a cutting mat underneath it and the pattern pieces need to be secured in place with pins. Cut out carefully moving the pieces as little as possible and try to keep them flat after cutting until you’re ready to sew. All of this will help minimise the pieces stretching out of shape, especially as a lot of this pattern has seams running on a diagonal. 

I felt that the length of the dress would probably be too long for me so I took some of the length out of the skirt pieces before I cut them out in fabric.
I calculated that approximately 5 cms would be sufficient to take out of the length so first I drew a line at a right angle to the grainline, then a second line 5cms from the first.
I pinned each piece to it’s ‘partner’ so that I could see if it would still align correctly after I folded out the 5cms.
It was really just educated guesswork but, eventually, by folding out the 5cms horizontally from each panel I was reasonably confident it would be pretty close.
Why didn’t I just take it off the hem at the end? You could easily do that but because I had just 2.5m of fabric, which may not have been quite sufficient, I could not take that risk so I did it this way instead. It took longer but removed the element of uncertainty.
This is almost everything laid up on the floor, I cut a linen version at the same time which is what you can see on the top. Whilst a single layer is often a very economic way of cutting fabric it’s usually more time-consuming to cut out so I did the two at the same time which was slightly risky but it worked out.

Once I’ve finished cutting out it’s vital to transfer all notches and mark darts and a couple of pivot points so I use old-fashioned tailor’s tacks (obviously you can use a textile marker pen if you prefer, I often do but it’s a pale fabric and I didn’t want to risk any marks being left) It’s a habit of mine to keep all the pattern pieces attached by just a couple of pins to the fabric until I need it, so that I don’t them get muddled. These are curious-shaped pieces so the chance of having them the wrong way round could be quite high! Next I stay-stitched all the neck edges on the machine 5mm in, if you have a very loose weave fabric it would probably be sensible to stay-stitch the bottom edge of the front bodice piece to prevent stretching. If you’re using a particularly fine fabric like chiffon you should stabilise the neck, and any other seams which could stretch, by hand-stitching very narrow cotton tape or ribbon over the seam line on the wrong side of the fabric. When I worked for bridal designer David Fielden many years ago we would cut the selvedges off the silk habutai linings for the seamstresses to use on necklines.

There is just a little fraying on the cut edges which I overlocked singly as I went along, as per the pattern instructions. Whether you’re sewing or overlocking the fabric I strongly suggest you have the whole piece supported on the table in front of the machine rather than feeding up from your lap. This is to prevent the piece becoming stretched as you’re sewing and possibly causing it to become misshapen.

If you find, as I did, that there’s a slight discrepancy between two seams (assuming that it isn’t an error in cutting or adjustment of the pattern) then pin it with the excess on the underside so that when you sew the feed dogs will take up the ease.

You can see the lower layer is a little longer than the top one and by sewing it with this on the underside means the feed dogs should take up the excess.
After sewing but before pressing it looked like this.

My photos should make it clearer, a good press will help steam out some of the excess too. Also, to minimise the risk of making a shiny patch on the fabric make sure you use a pressing cloth, you can often buy silk organza ones although I have a piece of plain fine pure cotton lawn which I’ve overlocked around the edge. I use this when I’m pressing darts or turning points or corners out too.

To sew an invisible zip into the diagonal seam across the back I machined the seam closed but I used a long basting stitch just for the section where the zip will go. This stitching will be removed later.

Line up the teeth with the basted part of the seam, this has been lightly pressed open already.
Pin the zip tape to the seam allowance with the seam and teeth matching.
I prefer to tack the tape to the seam allowance at this point but you could use Wonder Tape if you have it.
Now I removed the basting stitches and sewed the zip in using an invisible zipper foot. The zip I was using was longer than I needed.
Make a new stopper for the zip by carefully sewing backwards and forwards a few times over the teeth, cut off the excess then secure each side of the tape to the seam allowance using a regular zip foot.

Once the zip was in and side seams sewn up I checked the fit on myself. I cut a UK 16 and overall I’m happy with the fit and apart from the length I made no alterations to the bodice. Because I made the linen version first I already knew that the shoulders were a bit too broad for me and the sleeves dangled too much off the crown of my arm. I calculated that I needed to remove approximately 3cms to lift them up to a slightly better position. I found I didn’t need to alter the sleeve head though, fortunately it still fitted into the armhole. Another thing I did decide at this point was that the sleeve needed ’something’ else so I mocked up some small pleats and pinned the sleeve into the armhole to try out the effect.

I mocked up some small pleats with the sleeve pinned into the armhole.
I drew some markings so that I could then transfer the pleats equally to both sleeves.
More old-fashioned tailor tacks to mark the pleats.
The pleats are equally divided across the centre line of the sleeve.

After making the pleats in the sleeves and sewing up the underarm seam I used a ‘pin hem’ to finish the edge. This is similar to a simple rolled hem but even narrower. Begin by stitching a turning of approx 1cm very close to the edge, trim this carefully  

Sewing a pin hem, this is useful technique well worth mastering because if you haven’t got a rolled hem foot which could do the job, this gives a beautiful hem finish to fine or delicate fabrics.
Finished pin hem on the sleeve
Because I’d made the pattern alterations to the skirt length I wasn’t surprised to find there was a slight discrepancy in levels at the hem. Using a long ruler I averaged out a new straight line and then pin-hemmed it.

I love the 1930s/40s vibe of this dress, the drapey qualities of the fabric enhance the bias lines of the skirt in particular. I really enjoyed the challenge of putting the dress together, there are no particularly difficult techniques as such but it’s an interesting puzzle which you’ll need to spend a little time concentrating on, you’ll be rewarded with a striking but really wearable dress.

Thank you to Trend Patterns for gifting me the pattern, there was no expectation to write a review. You can read my previous review of the Square Dress pattern here. The fabric was provided by Lamazi Fabrics in return for a review which is also published on their own website.

I hope you find some tips and advice in here that might be of use to you if you’re thinking of using a fabric that needs a bit more forward planning than you’re used to. Trend have created another beautiful pattern with stunning and unusual details but the pieces cleverly work with the grain of the fabric so that working with the bias cut is a lot easier than it usually is. They have been gradually increasing their size range too so the TPC26 comes in UK sizes 6-22.

Quite a long blog this time so thank you for reading this far and, until next time,

Happy Sewing

Sue

Maxine Sweater by Dhurata Davis

~ Susan Young Sewing ~ 7 Comments

I first met pattern maker Dhurata Davies at my friend Sal’s ‘Sew2gether’ event last spring and then our path’s crossed again unexpectedly a couple of months later when I made a last minute decision to go to the Threads textiles fair in Farnham. Dhurata was exhibiting there and she offered me a copy of her Maxine Sweater pattern in return for a review. The pattern is intended as a sweatshirt, and I’ve made one in a jersey fabric already, but it also works well in a woven too. It was the diagonal seam lines with pockets concealed in them that appealed to me. The sweatshirt version was for a Minerva fabric blog review which hasn’t appeared yet at the time of writing but now that I’ve made a second top I can tell you all about the pattern here.

I had picked up a modest remnant of ‘Woolsey’, a linen/wool fabric in the Merchant & Mills shop in Rye last August, it’s a lovely deep teal colour which is one of my favourites (although it’s a devil to photograph accurately). When I made the jersey version I made a size 16 based on my body measurements and there’s plenty of room in it so I knew I could risk making the same size in a non-stretch fabric. [If you are making anything more usually intended for a fabric with some stretch you will almost certainly need to go up a size or two, especially if it’s in any way close fitting. Measure the pattern itself if you’re not sure and don’t forget you need to be able to get it on, will it need additional openings like a zip or buttons if there’s no stretch to get it over your head, or your hips?] 

Before I cut anything out I made myself a ‘whole’ sleeve pattern piece, it comes as a ‘half’ sleeve vertically so this needs to be placed on a fold in the fabric (twice as you need two sleeves!) but I always prefer to have a complete sleeve. Just stick the pattern to a large enough piece of paper so that you can fold it down the central ‘place on fold’ line, fold it in half and pin in a few places then cut out a new symmetrical pattern piece. 

I knew I would not have enough fabric for the separate collar, cuffs and hem-band pieces but I could lengthen the body so that it wasn’t ridiculously short. I added about 10-12cms to the bottom of the front and back pieces. I had to decide how to finish the neckline instead of the collar and I came up with a combination of piping directly on the edge first and then a band of jersey ribbing. I didn’t know how, or if, this would work but the piping would look fine on it’s own if the jersey wasn’t any good. 

The instructions and illustrations are nice and clear and straightforward and it’s not as difficult as you might imagine to get the diagonal cross in the centre. The seam allowance is just 1cm so I always highlight the pattern when this is the case so that, when I make the pattern again, I don’t sew it up as 1.5 by mistake and it’s all too small! 

the centre cross close-up on the outside.
and on the reverse.

Once the front was complete I joined it to the back at the shoulders and then made some bias binding for the neck. I had just enough scraps to cut 3 strips which were approximately 50cms long and 4cms wide which I joined to form one long strip. I have a specific piping foot for my Pfaff Quilt Ambition 2 which is really useful but you can usually use your zip foot if it allows you to stitch close enough to the piping cord. Not all zip feet are good at this especially if it’s the generic one which comes with the machine but there are usually adjustable ones you can buy which, in my experience, are better. The piping foot actually sits over the top of the fabric and piping cord rather than just beside it so it’s held more securely and stitches much closer to the piping for a better finish. If you want to see another use of the piping foot pop over to my review of the Simple Sew Lizzie dress.

this is the piping foot actually sitting over the top of the band as well as the piping too.

Once I’d made the piping I sewed it around the neck, raw edges together and making a neat join at the back. I knew I wouldn’t be able to find a matching jersey so I opted for a complete contrast. I bought 50cms each of deep red and dark grey tubular jersey from Backstitch and when I put them together I decided that the red made a more interesting garment. Generally when you’re adding a stretch band you work on the basis of it being approximately 85% of the neckline/cuff/waistband measurement that you’re attaching it to, depending on the stretch of the jersey. I’d made things tricky by adding the piping first so the machine had to go through a LOT of layers of fabric. I must say that the Pfaff sailed through it all pretty easily. The only time it was hard work was over the seam allowances on the cuffs. Because I was making this bit up as I went along I sewed the piping onto the cuff first then sewed the under arm seams, if I were using this finish again I would sew the under arm seam first and then put the binding on ‘in the round’ because it would be less bulky where it crosses the seam. I used my little seam-hopper gadget to help lift the foot to help ease it over the bulky seams, this one came with the machine but you can buy something called a Jean-a-ma-jig or even use a piece of thick folded cardboard.

On the left the cuff is folded and stitched and then folded again on the right. I ran a row of wide zigzag around the raw edges to keep them together before sewing them onto the cuffs. The neckband is done the same way.
you can see it’s all a bit of a tight area to work in but the finished effect was worth it I think. The jersey has to stretch as it’s sewn onto the woven non-stretch fabric.
this is inside the cuff, as you can see it’s quite messy and bulky but the little plastic gadget will help to ‘leapfrog’ over the seam. With the needle down to prevent it from moving stop just ahead of the seam, lift the presser foot and slide the gadget underneath the foot with its ‘toes’ either side of the needle (it can be from the front or the back depending which you’ve got better access to) and then lower it back down so the presser foot is resting on the gadget. The foot should now be on a better level to sew over the seam, sew forwards a few stitches until you’re clearing the seam then move the gadget around to the front (if you’ve had it at the back) and place it under the foot there. Come slowly forwards a few more stitches until you’re completely clear of the seam and back on level sewing again, always taking care that the needle doesn’t hit the plastic.
the finished cuff

Having told you 85% is the usual amount for a stretch bands I should have made the neck one slightly shorter than that as it doesn’t sit completely flat even after a good amount of steaming. I left it though because it doesn’t look that bad and it would be a lot of work to re-do it. First join the band into a loop along it’s narrow edge then fold it lengthwise in the same manner as the cuffs and then divide it into 4 equal parts marked with pins. Next equally divide the neck (or cuffs) equally into 4 too. Pin the band onto the neck (or cuff) at the marks and stretch the band to fit and stitch in place. You can see from the photos that this was quite tricky because of the number of layers involved, I graded the layers so that it reduced the bulk as far as possible. All these layers plus the piping cord made it too difficult to get the cuffs under the overlocker so I finished the edges using a simple zigzag stitch. Around the neck I used the Coverlock 3.0 to coverstitch which had dual benefit of neatening on the inside and giving an attractive double row of top stitching on the outside. 

the jersey band is very slightly wavy which suggests it’s fraction too long but it was too much hassle to take it all back off again and, frankly, CBA!
this is the coverstitching from the outside, the piping made it really difficult to get closer as the width if the foot wouldn’t let it get any nearer. Incidentally, I tried this out on a small sample piece first so that if it all went horribly wrong I didn’t ruin the whole garment. I strongly recommend that you make samples of any new or unusual techniques you may want to try so that you don’t spoil all your good work, it’s worth the bit of extra time it takes.
the coverstitching from the inside, it served the double purpose of top stitching on the outside and neatly covering the raw edge on the inside. I’d trimmed and layered all those edges first to reduce the bulk.

To finish the hem I just overlocked the edge, turned it up and stitched twice. So that’s it really, I’m very happy with the finished top, I layered it up with a thin RTW T-shirt when I wore it to go to Brighton recently. The fabric doesn’t seem to crease so much as bend, it’s of a double-weave construction the same as cotton double gauze. 

pre-crumpling and modelled by Doris

I’m really happy with the outcome of this top, the fabric has lent itself well to the more smocky kind of shape and although it was bit involved I really like the finished effect of the addition of the stretch cuffs and piping onto an otherwise simple garment. The ‘Woolsey’ fabric does fray a bit because of the loose weave but it’s manageable. Incidentally, this pattern looks great lengthened into a dress or with the pockets left out of the seams if you’re short of fabric.

Thank you Dhurata for the gift of the pattern, in my opinion it’s a goody and if you aren’t adding extras like me it’s a nice quick half-day make. Dhurata has also designed some lovely children’s patterns too which you might be interested in.

Until next time, happy sewing

Sue

Your Sew Over 50 go-to tee-shirt patterns

~ Susan Young Sewing ~ 15 Comments

We asked you another question on @SewOver50 in October-which were your favourite go-to, never-fail, T-N-T T-shirt (tee shirt?) patterns and naturally you came up with a veeeeerrrry long list. I’ve trawled through them all and simply listed them here with a link (if I found one) for each so you can check them out for yourselves. As blogs go, it’s a bit of a dull one but you might it useful and maybe find your next new favourite pattern amongst these. Needless to say there are probably another one or two hundred more patterns which you think ought to be on this list!

I’m not recommending or endorsing any of these patterns personally, they have all been suggested by you, the enthusiastic followers.

Melissa Breton Tee-Thrifty Stitcher -relaxed drop-shoulder tee with 3/4 sleeves and a bateau neckline

Plantain-Deer & Doe–free pattern (if you sign up on the website) loose-fitting tee with a low scooped neckline and 3 sleeve options.

#1366 Cynthia Rowley Simplicity-loose fitting top

Mandy Boat Tee-Tessuti–free pattern boat neck drop-shoulder Tee with 3/4 sleeves

Ola-Tessuti-tunic top

#3338 Kwik Sew-I can’t find this one, possibly discontinued?

Astoria-Seamwork-cropped length, fitted long-sleeve top

Classic Tee-Love Notions -close-fitting tee with 3 neck options and 3 sleeve lengths

Laundry Day tee-Love Notions-fitted tee with 3 necklines and 5 sleeves options

Basic Instinct shirt-Secondo Piano-classic simple tee

Freya Agnes Coco-TATB-Tilly has a range of jersey tops and dresses with a variety of necklines and sleeve options.

Moneta-Colette patterns-Moneta is a dress pattern in stretch fabric with a fitted bodice and a couple of sleeve options.

#2805-Jalie Patterns-t-shirt with 4 sleeve and 4 neckline options. It has a huge range of sizes

Statement Tee-Ottobre magazine 2017/2 various options so check the website

Wardrobe Builder Tee-Wardrobe by Me (not many instructions apparently) close fitting tee with 3 body lengths, 5 necklines and 6 sleeve-lengths!

Uvita-Itch to Stitch-dropped shoulder bateau-neck tee with 2 sleeve lengths

Pamela’s Perfect Tee-Pamela’s patterns-longer length fitted tee with several neckline and sleeve options

Green Tee-Greenstyle Creations-longer length fitted tee with scoop or V neck and lots of sizes

Lark-Grainline-a popular pattern with 4 neckline options and 4 sleeve lengths.

Stellan Tee-French Navy Now–free pattern a boxy tee, not sure how many sizes.

The Astair tee-another boxy tee also from French Navy Now with sleeve variations and a patch pocket.

Renfrew-Sewaholic another classic tee with several sleeve lengths and various necklines

Kirsten Kimono Tee-Maria Denmark-close-fitting cap-sleeved tee

Carine Tee-Elbe Textiles–free pattern cropped tee

Lane Raglan-Hey June-scooped neck raglan tee and sweatshirt pattern

Jade-Made by Rae-scooped neck tee in a wide size range

Concord-Cashmerette-lots of options in curvier sizes

Molly Top-SOI City break eBook classic drop shoulder tee

Eva-Pattern Union-a simple close-fitting tee with long or short sleeves.

Geneva Tee-Named raglan tee with long sleeves

Ruska-Named-Breaking the Pattern-tee shirt/dress with various options

Ultimate T-shirt-Threadcount free gift pattern from a back issue of Love Sewing magazine

Panama-Alina Design-tee shirt with dress-length options

starting top left @debs_sewing_room @sarahguthrie_stitches @loves_knitting @heathersewist
left @spoolriversewing main centre @sewcialstudio right @sewingalacarte
left @sewcialstudio right @mrs_moog
bottom left @damselfly.ca @_mysewingdiary @rocketcitysewing and @seams_sew

Update January 2022

This has probably been the single most popular post on the blog since I first published it over two years ago so I thought it could do with an update because new patterns will have been released, or missed off last time, and many have become very popular in that time. As before, these were all suggested by you dear reader so, in no particular order, they are as follows…

Rae top by Tessuti patterns, a pretty gathered neckline and several sleeve options

Iris by Forget-me-Not patterns a simple shape but with an interesting pleated short sleeve

Peak Tee by Wendy Ward in her book Beginners Guide to Sewing with Knitted Fabrics

Somerset top by Maven patterns (I’ve used this one myself a number of times including for this hack) bateau neckline with several sleeve options including to a bishop sleeve with deep cuff

Frankie from Tilly and the Buttons in her book Stretch, a simple raglan sleeve

Rio ringer from True Bias (this also has a children’s size range too)

Gable top by Jennifer Lauren Handmade, 50s-inspired slash neckline

Basic block Tee by Fehrtrade in her book Sew Your Own Activewear

Fog Tee is from The Fabric Store

Tabitha from Tilly and the Buttons in the book Make It Simple (I used the lengthened version for this Minerva make)

Nora is a loose-fit T-shirt by TATB (they are good at basics!) there is now a cardi version available too

Needless to say this is still in no way an exhaustive list but they have all been used, and recommended, by you. There are some freebies which might be worth a try, as well as pricier options.

Until next time,

Happy sewing

Sue

Manolo and McQueen

~ Susan Young Sewing ~ 4 Comments

Just a quick update of two exhibits which are in London at the moment in case you’re planning a visit to the capital.

At the Wallace Collection in Manchester Sq just behind Oxford St there are currently many beautiful examples of the shoes made by Manolo Blahnik over the course of his long career. He is a frequent visitor to the museum and over the years has used many of the rooms and their paintings and artefacts for inspiration. It’s easy to see this as you move around the upper rooms in this building which hosted many fashionable parties in its elegant salons. The shoes are displayed within beautiful glass domes and they have been placed in specific rooms and settings by Blahnik himself.

Even if you’re at the Wallace Collection primarily for the shoes don’t neglect the rooms themselves because there’s lots of varied and beautiful art to display including several Rembrandts, Gainsborough and Sir Joshua Reynolds portraits, and The Laughing Cavalier by Frans Hals (more of a smirk really…)

don’t forget to look up at the spectacular chandeliers
This painting shows Maria Camargo, the woman generally regarded as the first ‘ballerina’ because she danced so daintily on her toes.
Madame de Pompadour
The Swing by Fragonard. Vivienne Westwood has said that this was a influential painting for her when she was creating her more structured and sumptuous gowns.
We listened to a very enlightening talk about this deceptively simple painting called The Lacemaker. It’s small but beautifully observed.

So, lots and lots of shoes, some-most-were very impractical, bought by women who don’t have to walk far or travel on public transport…This exhibition is on until September 1st and is free to enter which has to be a very good reason to go.

Also free is the exhibit on the second floor of the Alexander McQueen store in New Bond St, it’s intended for students but as a keen dressmaker I think that counts too.

We had attempted to visit here several weeks ago but it was closed because they were filming so do be aware there’s a possibility it might not be open for some reason. Check the shop opening hours too.

I was practically hyperventilating as we climbed the spiral staircase (with anticipation not lack of exercise!) I have been a long time admirer of Lee Alexander McQueen’s work and that of Sarah Burton since his untimely death in 2010 so to be so close to the garments, samples, inspirations and working processes is an extraordinary opportunity. I visited the Savage Beauty exhibition at the V&A in 2015 a ridiculous eight times and I’m not ashamed of it!! Part of what I admire is that McQueen himself was the whole package-he designed incredible garments which pushed boundaries but he could also cut patterns, sew garments by hand or machine, he was a true visionary.

You’re not left to your own devices once in the exhibition space, there is a member of staff to show and explain anything. Maria was there when we visited and she explained that she works in the Atelier most of the time and at others she is at the exhibit to help visitors to understand and appreciate what they are seeing. Whoever is there if you visit make sure you ask questions to get the most from it.

On the rails are examples of vintage garments which were deconstructed to their bare bones, analysing the techniques underneath in order to create new and original garments.

For example the beautiful black embellished jacket and trousers were inspired by several vintage and antique mens frock coats and jackets, the exposed canvas, pad-stitching and quilting were reinterpreted with a modern twist, including beautiful jet-embellished lace applique. [Take a look at my previous post when I refashioned a two piece suit into a McQueen inspired jacket.]

Some of the inspiration for the fabrics came from an antique Jacquard fabric samples book found in a Parisian flea market.

Inspiration boards including Victorian photographs and fabric samples
A few of the many photographs taken on the house models in the looks at various stages of development.
We were told that some of the jet beads used were salvaged from antique jewellery and repurposed, that’s high-end upcycling!

As well as the black suit there is also a completely contrasting dress which has it’s origins in the John Everett Millais painting of Ophelia (in Tate Britain) the pioneering photography of Julia Margaret Cameron, a Victorian wedding dress and original Victorian corsets which, like the jackets, have been taken apart to analyse their construction.

one of the mood boards accompanying the dress
an original Victorian wedding dress
You can see how the boning sits in pockets semi-exposed just as it did in the Victorian original

In addition to the actual dress there is a full-size and several miniature versions made in printed paper which are like beautiful sculptures.

Fabric to dream of….

There is also an outfit with a hand-painted leather jacket and asymmetric knitted dress underneath, it turns out that our guide Maria was responsible for painting it (in gouache apparently)

Hand-painted leather jacket
happy face…

In addition to the new garments there are a few from previous collections including the iconic high-collared corset made in 1997 by Mr Pearl.

If you’re interested in the ‘bones’ of garments and knowing some of the processes which lead to their creation then you’re bound to find this a fascinating exhibit to visit-I felt incredibly privileged to be able to see the garments so close and to have someone like Maria explain firsthand what we were seeing. As I said earlier, the exhibits will change regularly, this one is due to continue for a few more weeks and then a new one will be installed in September, we asked what it might be but Maria was sworn to secrecy!

Overall, two fascinating short term exhibitions which are worth a visit if you get the chance.

Until next time,

Sue

My first Sew Me Sunshine fabric review.

~ Susan Young Sewing ~ 4 Comments

When Harriet asked me if I’d contribute a blog post for Sew Me Sunshine I was excited and very happy to help. After I’d had a good look at all their lovely fabrics I settled on the pink colour-way of the Gemma viscose/linen mix, it’s such a pretty shade with a magnolia flower print. When the fabric arrived Harriet has included a helpful card with full fabric details including fibre composition details plus width and quantity purchased. There’s a space to note if you pre-wash or not before it goes in the stash or straight to use.

The print is quite wide spaced and one-way [actually there are one set of flowers which run in one direction and another set which go the opposite way] so it’s worth bearing this in mind with pattern placement, and all your pieces should be positioned one way or the other.

I decided to make a Maven patterns French Dart shift dress which I’ve made twice before because it’s a lovely simple shape with no fastenings which makes it quite quick to make, three sleeve options, side seam pockets and an elegant roll collar.  

Because of the positioning of the print I opted to have the smaller flowers running down the centre rather than the large blooms which would have resulted in a more wasteful lay plan. As I had enough fabric I opted for the long sleeved version which I’ve made both times previously, the gathers at the cuff are so pretty. I cut the sleeves so that similar flowers are on a level with the dress front.

Because the fabric is quite loosely-woven and a linen mix it tends to fray a bit you’ll need to be aware of this. Making a style with lots of gathers may not be wise because it will start to come apart eventually the more you pull the gathers up-the cuffs on this dress were fine as it’s fairly short. The fabric would look lovely in pleats or folds too.

the gathered cuff has a pretty binding

The fabric sews up beautifully, it isn’t overly drapey but it’s nicely fluid and responds well to pressing although like most linen, and linen/mix, there is noticeable but not excessive creasing-this is one of the features of the fabric and you have to accept that as part of it, it isn’t a fault. You could also use it for loose-fitting shirts or trousers, for example the Zadie jumpsuit from Paper Theory would look gorgeous in it or what about the Tilly and the Buttons Seren dress, nothing too tight-fitting though as it will crease badly or ‘seat’. You can always add a soft cotton lawn lining to a fabric like this which might help, this particular fabric isn’t sheer though so you can’t really see through it.

The structure of the fabric lends itself to the roll-neck collar and this one doesn’t have any interfacing in it, it stands well on its own.

I’m really happy with the finished dress, it’s very feminine and in a very unpredictable British climate I think it will be ideal on cooler warm days (does that make sense!?) I’ll wear it with tights in the autumn. Incidentally, I hand finished the hem so that the stitches are invisible, you could machine it up though.

We went to a wedding at Hatfield House just after I finished the dress so what better opportunity to wear it and stand in front of some of the most beautiful wisteria. What you can’t see is the long-sleeved thermal top I’m wearing underneath because it was actually freeeezing cold and I was determined not to wear a coat over the top!
We’re always entertaining wedding guests!
In the beautiful Old Palace Garden, it’s evening now so it was getting a bit dark for decent photos really.

Thank you Harriet for providing me with the fabric and the opportunity to write about it-it also comes in a pale blue colour-way too which is equally lovely if pink isn’t your thing. 

Until next time,

Happy Sewing,

Sue


Paris Sewcial 2019

~ Susan Young Sewing ~ 8 Comments

Phew, well that went too quickly!

At the beginning of the year Charlotte (@englishgirlathome) and Carmen (@carmencitablog) announced there was to be another Paris Sewcial in May. It was a free-to-attend event, you just needed to get yourself there and book your own accommodation. The previous one was four years ago and at the time I was just getting started on IG and barely knew anyone, although I do remember seeing pictures pop up on my feed. This time a group of us were keen to go together and the super-efficient Claire Sews got us all organised with trains and hotels so we were soon good to go!

Six of us met at London St Pancras early on Friday morning and took the Eurostar direct to Gare du Nord, it was a short 15 minute walk to our hotel near Sacre Coeur and Montmartre from there. Although our rooms were definitely compact and bijoux I was delighted to discover mine had a modest view of the Eiffel Tower! [it was better in reality than it appears in my photo incidentally] I was soundly mocked by my companions but I think they were just jealous of my room with a glimpse.

I was keen not to spend my whole time in Paris inside shops no matter how appealing the fabric was, and it was a first visit for Kara, so we took the opportunity along with Salva to get the hop-on hop-off bus which visited all the major sites in the city. Cue a few photos of Parisian landmarks…

The Louvre
Arc de Triomphe du Carrousel
across the Seine
Notre Dame de Paris
Musee D’Orsay
Place de la Concorde
looking towards the Champs Elysee from Place de la Concorde
Place de la Concorde
LV flagship store
l’Arc de Triomphe d’Etoile
not sure what this is….
Les Invalides
the Petit Palais
Opera Garnier

In the evening we were joined by two more companions so the eight of us went to supper at a restaurant nearby and had a very jolly evening.

Sewcialists socialising!

The grand meet-up commenced at approximately 11am the next day so after a delightful breakfast at a little cafe we arrived to find a huge group of our fellow sewers at the foot of the steps in front of Sacre Coeur. It was SO lovely to see so many people there, Charlotte’s patient partner Phil took a group shot of us all together before we eventually and gradually dispersed to the fabric shops which are very close by.

  • So happy to be here
The team photo! [can you spot me?]

There are lots of fabrics shops grouped close together in the area and many of them specialise in a method of selling which I hadn’t encountered before. The fabric is grouped in fibre type so linen, silks, woollens, viscoses etc plus cottons were sub-divided into fabric type like denim or double-gauze but everything is cut into 3 metre lengths and folded on end. It sounds complex but it isn’t, you have to not be a neat-freak. It’s called ‘coupons’ and I thought it was a very good way of selling because 3 metres is plenty to make many items of clothing like a dress or a coat perhaps, although admittedly too much for some, you could always share with someone else provided you were agreed on the colour! It means you don’t have to find a member of staff to cut your fabric, they don’t need tables to cut on either. It needs to be kept tidy but I found it an enjoyable and novel way to fabric shop. I bought fabric in Les Coupons de St Pierre, Sacres Coupons and Tissus Molines but there are quite a few others close by too. There are still traditional shops too where the fabric is on the roll and staff will cut your chosen quantity, plus some stores selling haberdashery, trims and buttons etc.

Emily and Megan checking out the fabrics with Alison and Camilla, so much to choose from.

Eventually we were pretty much shopped out and in need of sustenance so the groups dispersed to various restaurants for lunch.

hurry up, we’re hungry…

In the afternoon many of us carried on to a pop-up shop where DP studio patterns were selling off ex-sample fabrics and dead stock at very low prices, as well as their own patterns. A few carried on still further to Make my Lemonade and a few other shops but some of us were pretty pooped by now so we headed back to the hotel with our swag.

  • at dp studios

Later in the evening many of us travelled across town to a restaurant where a meal and entertainment had been laid on for us. Unfortunately the Parisian liking for late eating didn’t suit everyone after such a long and tiring day and we were all quite keen to head to our beds in the end.

After brunch on Sunday morning a fairly large group went to visit the Yves St Laurent museum at 5, avenue Marceau. As you know I love a good fashion exhibition and this was no exception, the entrance fee is €10 which I thought was pretty reasonable. It isn’t that large but there are quite a number of gowns and outfits on show, as well the studio in which YSL used to work for around 30 years. It was also an opportunity to actually chat with fellow Sewcialists without it being too noisy or fabric purchasing being our primary occupation.

The first salon was dedicated to the famous Mondrian dress with many of its iterations including Barbie and Marge Simpson, and unwearable suggestions for eye makeup.

In the other salons were various YSL outfits from past collections.

Neon Mondrian
the real deal
I don’t think the knitted sarcophagus was my favourite, however beautifully knitted it is!
one for the summer of the jumpsuit.
YSL was the creator of ‘Le Smoking’ after all.

The studio in which St Laurent created for over 30 years was a beautiful bright, light-filled space with many artefacts which made it feel as though he had merely stepped out of the room for a moment.

group selfie

There is, of course, a modest and tasteful book and gift shop at the exit although I resisted the urge to buy anything else.

After leaving the museum we all headed in various directions, avenue Marceau is very near the river with its wonderful view of the Eiffel Tower. We indulged in crepes from a vendor after which we set off for the Musee D’Orsay with a very pleasant stroll along the Left Bank of the Seine-fortunately the very threatening sky never did come to anything.

There was quite a long queue at the D’Orsay but we Brits are good at that and the time passed while we chatted. Inside was crowded so we went straight to the top floor where the Impressionist artists are housed. Amongst the painting we spotted these sewing/crocheting beauties which seem particularly appropriate, plus two favourites of mine.

We finished the day with supper back in the Montmartre area, plus the most beautiful ice cream I have ever eaten. We worked them off by climbing right up the hill to Sacre Coeur!

What did I buy did you say?? I was super-restrained and chose several plains and a classic stripe, plus an unusual print lining and a remnant with a fish design. I spent less than €100 in total which I’m happy with for the quality of fabrics that I bought.

And then it was time to come home again…Carmen joined us for breakfast on our last morning which gave us a chance to thank her (again) for instigating/organising the whole event.

so many beautiful backdrops for a photo and we chose Pret a Manger with terrible lighting!

Even on the Eurostar home we still had lots to talk, and laugh, about and we all agreed that there had to be another Paris Sewcial in the future. Thank you again Charlotte and Carmen for having the idea in the first place-it was brilliant and such a delight to meet so many diverse yet like-minded people.

Until next time,

Sue

a new Minerva Crafts blog

~ Susan Young Sewing ~ 2 Comments

I’m really happy with this make, it’s the Dawson Coatigan by The Thrifty Stitcher, Claire-Louise Hardie, which I made in Navy Ponte Roma given to me by Minerva Crafts in return for an honest review.

This pattern was released just before Christmas and I think it would be a useful addition to any wardrobe. It’s a softly tailored edge to edge coat with flattering seam lines and integral pockets. It works well in a structured jersey like Ponte Roma, and it would also look good in boiled wool or felted wool.

And depending when you’re reading this the Dawson also qualifies for the Sew Over 50 #so50Visible challenge too which finishes on March 15th. Read my previous blog posts for all the details on that but you haven’t got long if you hope to win one of the prizes!

I love the darts detail on the back and sleeves on the Dawson.

There’s lots more details and photos of my make over on the Minerva Crafts website, thank you as always to them for providing me with the fabric.

Until next time,

Sue

The Eden coat by Tilly & the Buttons

~ Susan Young Sewing ~ 19 Comments

It’s always nice to be asked isn’t it? Doesn’t especially matter what but anyway, it is. So when I was asked if I would help in the testing process of TATB’s new pattern for a jacket/coat to be released in the spring 2019 I was both flattered and happy to help.

I know I have a regular moan about some Indie pattern designers but TATB are one of those who I think do a very good job. The presentation (recently with refreshed new look packaging) and the quality of the drafting and the instructions is, in my opinion, of a very good standard. Tilly doesn’t usually chuck out loads of patterns one after another, they are often in pairs and spaced out through the year.

As is quite often the case with testing there was originally a fairly tight turnaround to return feedback so my first problem was to source the fabric, and quickly. I’m not a great one for buying fabric online unless I’m confident the description and other information is accurate, or I know exactly what it is. This time though I didn’t have time to explore my regular fabric shopping haunts in London and so I had to search t’internet to see what I could find. I’d hoped to get some kind of waterproof or waxed fabric but the ones I found were either very expensive, too boring, too childish (a lot of dinosaurs and unicorns!) or not suitable for the purpose. Next I looked at wool and wool-blends and many of these were also much too expensive as well but in the end I found a really nice felted wool from FabWorksOnline so I ordered that. I was very impressed with the speed it arrived too! It’s a fully lined jacket and I’d got some silky pale pink cloque in the old stash which I didn’t think I’d use for anything else, and I had a cream-coloured open-ended zip which I thought ‘that’ll do’ so I was good to go. One version of Eden is lined with jersey, you might want to consider putting a silky lining in the sleeves, although you could still put jersey just at the cuff ends if you want the contrast roll-up effect.

After a bit of a hold up the pattern arrived but when it did I hit the ground running. In all of Tilly’s other patterns I make myself a size 5 but after checking the finished measurements for the jacket I opted for a 4 this time.

I’m not going to give you a verbatim run through of the pattern here, this time I’ll highlight areas where I used specific techniques which I think work well for this kind of garment.

There are two style variations of the Eden, either a simple longer-length duffle coat style with toggles, or a shorter jacket with ’storm flaps’ and bellows pockets which is the one I opted for. We were asked not to make any drastic pattern hacks during testing but I chose to add 5cms to the overall length of the shorter style, it was shorter than I would wear it but the other was too long.

The next thing I did differently was to use the lining fabric on the underside of the flaps instead of the wool, to reduce the bulk of them when they go into the seams. If you’re using a thinner fabric this step isn’t so necessary but I knew that once all those thicknesses were layered up into the sleeve seams it would because very bulky.

this is the underside of the front ‘storm flap’ with lining instead of double wool.

The next thing I changed (and which hasn’t been altered on the final pattern) is the shaping at the cuff of the sleeve. This is because if you have a deep turn-back but the sleeve continues down straight ie. getting narrower all the way down, when you fold it back it doesn’t lie flat against the inside of the sleeve seam. Look at the photos below and you’ll see what I mean.

I’ve shaped the seam outwards, if you look at the next photo you’ll see why.
when you turn the cuff up inside the sleeve it will sit flush inside now.
I also opted to make the lining shorter to the line I’ve marked so that it wasn’t going to droop out of the end of the sleeve. I felt there should have been a notch to mark where the turn up point was. I made a 5cms turn up for mine.

My other suggestion for the cuff is to use a strip of iron-on interfacing to stop it from stretching, being baggy and to give it some body. This is a technique I’ve picked up after doing numerous sleeve-shortening alterations for people because this is what you will commonly find inside RTW coats and jackets to stabilise it.

Iron-on interfacing applied to the lower edge of the cuff so that it’s just over the folding point of the cuff.
it looks like this when it’s folded back.
After sewing up the sleeve seam I use my ‘clapper’ as a mini ironing board to press the seam open.
Then I turned the cuff back into position to give it a good steamy press. Use a pressing cloth so your fabric doesn’t go shiny. If you aren’t familiar with a clapper, as you can see it’s a wooden tool which can be used in a number of ways. It gets its name from when you whack the steam out of woollen fabrics during the tailoring process, so that it doesn’t remain damp.

I’ve also learned from doing alterations that a few hand stitches inside the cuffs, and also the lower coat hem facing will help hold them in position so that they don’t drop down and spoil the look of your finished jacket. It’s tricky to describe what sort of stitch this should be, it’s a kind of slip-stitch a bit like you might find on handmade curtain hems. The sleeves are raglan so they are easy to insert.

The instructions for putting the zip in are good and the photos are a help here too-there will be an online tutorial although at the time of writing this I’m not sure if it’s available yet. Putting the lining in isn’t actually that complex but it does take time and concentration, and a bit of brute force. Don’t make the opening in the sleeve lining too small because it will make it very difficult to pull everything through, especially if you have stiff or thick fabrics. The gap gets sewn up and is then down inside the sleeve eventually any way. If you’re in any doubt about accomplishing this part my suggestion would be to get the lining sewn by machine to the edges around the front (zip) and hem, pull the lining through and then slip hem the lining to the cuffs by hand.

I chickened out of putting snaps on my jacket even though they would look nice. I haven’t used them on anything else and I didn’t want to spoil my Eden so near the finish line! I opted instead for very large silver press studs which I sewed on by hand.

I finished my Eden in December and I’m really pleased to say that I have worn it loads over the winter months. I’m very happy with my size decision too because there is still plenty of room for jumpers to layer up underneath, I think the next size up would have been too big. I also think the grey and pink look really pretty together as well.

I hope you find the techniques I’ve mentioned helpful, although I don’t think they were carried through to the final pattern, TATB obviously felt that their own methods and descriptions were good enough and maybe I’ve over-complicated things but overall I’m happy with the finished garment. It’s categorised as for ‘improvers’ and I think this is a fair analysis, it would be too complex for a novice sewer although with online tutorials and determination anything is possible!

Christmas in Covent Garden
at Wimpole Hall
On Worthing beach…

As you can see from my photos my colour palette is a little more ‘mature’ shall we say than the TATB samples but I think that also proves that it’s a nice casual style which will actually work in lots of fabric and colour combinations. I enjoy the process of testing although there are times when it’s frustrating, I assume I’ve been approached because of what my experience can bring to the party and that isn’t always borne out in the end but it can be rewarding and personally I always take a lot of time over it and try to use my skills and experience to help, advise and improve when possible. I probably won’t be asked again now so I hope you find this post helpful…

Until next time,

Sue