Trying out a new Simplicity patterns PDF

Simplicity have long been one of the most familiar big names in the home sewing paper patterns market but many of us are now choosing to use PDF patterns instead for a variety of reasons. Simplicity have recently decided to dip a toe into the waters and release a small collection of patterns as PDFs for the first time.

I was first invited to try one of this new range of PDF patterns way back in high summer but for a variety of reasons it’s taken until mid-October to get completed. 

Simplicity have released a range of ten basics which are available now from Sew Direct including several tops, a skirt, a dress and a jumpsuit, plus two children’s patterns and a free clutch bag pattern. 

I chose the tie-front robe jacket SP110 which appealed to me as a cover-up in place of a cardi or sweatshirt and, because it was July at the time, I picked a pretty, drapey Atelier Brunette viscose crepe in a pale ivory print kindly provided by Minerva. The robe jacket is a very simple silhouette with a wide grown-on 3/4 length sleeve, the neck is finished with a band and the tie waist is elasticated across the back.

For me, it depends how many pages a PDF has whether I print it myself or send it away (my usual cut-off is anything over 30 sheets, more than that and I’m not keen on the printing and assembling) However, we had been experiencing postal strikes here in the UK and I needed to get started so I printed at home this time. I think the paper in my printer was a bit out of alignment because not all the pages were printing as accurately as they should have been but fortunately I could see what had gone adrift as I assembled the pages and was able to rectify it. Make sure you print the test page and check carefully that all borders are present and accurate, don’t simply check the test square measurement and wander off into another room while it’s all printing out… With A0 printing this shouldn’t be an issue.

The pattern includes all sizes from UK6 to UK26 (up to 48” bust) which are broken down into two size bands (there isn’t a layering option to isolate which sizes you choose to print unfortunately) The robe jacket consists of just six simple pattern pieces.

The instructions sheet/booklet design is attractive and uncluttered with clear diagrams and straightforward step by step instructions. For the more novice sewer there is a glossary which includes all the sewing terms that will be used throughout, and a page explaining pattern markings. This being a US-originated pattern, all the seam allowances are only in inches so you may want to write your own metric equivalents on the page somewhere before you start, to avoid confusion. 

snipping the curved underarm seam means it sits more smoothly without puckering when it’s turned through

pulling up the gathering stitches

turning through the front ties using my old school ruler!

I joined two pieces of elastic using the 3-step ‘elastic’ stitch on my machine.

two different methods of pulling the elastic through, either using a bodkin or using a safety pin with a piece of masking tape to prevent it from opening accidentally inside the channel.

All finished

This is a quick and easy make, not much more than half a day probably, and everything comes together well. I thought the instructions and diagrams were clear, well explained and thorough without being over-complex. Overall a relative beginner should be able to manage this pattern. I like to print my instructions in booklet form but I should have increased the font size a little as I struggled occasionally to see the diagrams. I think the diagrams are actually very good, I simply didn’t print them large enough. If you are reading them from a tablet or lap top then this isn’t so likely to be an issue.

My only ‘problem’ now is that I have a summer garment as we head into autumn/winter. I intended it to be a light cover over summer dresses and tops so I’ve tried to style it for the season as it is now. I made a UK14 but possibly should have gone up a size, I feel self-conscious about how it looks around my midriff. It falls exactly on my natural waistline (I’m 5’5” tall) rather than above it like the models who are probably 5’8”-5’10” minimum. Hey ho, I didn’t get the tall gene but I did get the yoyo weight one instead! Basically, I’m pleased with the garment overall but less pleased with how it looks on me just now. I’m determined to get use out of it though but it will probably not be much before next spring. 

Wearing it with Vogue Marcy Tilton #8499

and with a newly finished pair of wide-legged Eve trousers by Merchant and Mills

And finally with my recent Nina Lee Portobello trousers and a vintage shirt pattern from around 1978!

I have a small quantity of the fabric left so, if there’s enough, I may consider adding it to the bottom under the waistband. This shouldn’t be too difficult because the waistband is straight and it would then give a little peplum which I might feel more comfortable with. It wouldn’t be too difficult to add a longer skirt to turn it into a coat as an alternative.

Being a PDF means you can buy the pattern to use immediately, and all the others in the Simplicity PDF range from Sew Direct. I was paid a modest fee for my pattern review and generously provided with the fabric to make it from Minerva. All views expressed are of course my own. 

Until next time, happy sewing

Sue

The Maker’s Atelier asymmetric gather dress

In the summer of 2021 Simply Sewing magazine invited me to choose an Indie brand pattern to sew and review for them. After some deliberation I settled on the Maker’s Atelier Asymmetric Gather dress which they generously provided me with free of charge. The article was published a year ago now but if you didn’t see it then I’m sharing some of my thoughts about the pattern here.

I like Maker’s Atelier patterns because they are deceptively simple to look at but many of them have stylish details such as notched hems, interesting seam lines, button-up backs or gathered sections which can elevate the garment out of the ordinary. On their website, and also in their newsletter, they always illustrate how much variety you can create from reusing a single pattern simply by sewing it in different fabric-types. I’ve made numerous iterations of their Holiday Shirt and Top using a number of different fabrics and embellishments for example.

If you’ve seen my various makes of Trend Patterns you’ll already know I’m rather fond of an asymmetric style and although the Maker’s Atelier one is a simple cocoon-shaped shift dress the gathered features really lift it out of the ordinary.

Because the front pattern piece is cut as a whole ‘right side up’ by flipping the piece over you can have the gathered neckline to the right or left depending on your preference. I love how the back is given shape and definition by adding the wide elastic at waist level too. 

I made this first version in gingko-printed crepe fabric bought at least four years ago from Fabrics Galore.

The style works best using a fabric that gathers softly and has some drape which is why the viscose twill kindly given to me by Sew Me Sunshine worked well. I wanted a fabric with a little bit of weight to it so that the elastication looked right, a stiff fabric without any fluidity would not flow nicely over the contours of the body. I really wanted a design that would look interesting whether it was gathered or not. This particular fabric from Mind the Maker contains 100% LENZING™ ECOVERO™ Viscose, which is a sustainably certified viscose fibre by LENZING™ with minimal environmental impact in the production process (compared to production of traditional viscose fibres). Some fibre and fabric production methods can be very damaging to the environment and the work force so this is at least a step in the right direction.

It was very satisfying to see the shape come together once I’d inserted the elastic, I know it probably sounds odd but I do love a bit of understitching on a facing. However I’ve found the back neck facing keeps creeping up though so I need to find a way to fix that.

Viscose often shifts around quite a lot so it’s important to not pull or drag it too much while you’re laying it up so that your pieces aren’t distorted once you’ve cut them out. If you have to cut on a table which isn’t quite big enough make sure the overhanging fabric is at least supported on a chair to prevent it pulling the fabric on the table out of shape. If you can manage to cut on the floor that would probably be preferable. Thankfully there aren’t many pattern pieces though so it isn’t a complex lay-plan.

My measurements at the time fell between a UK 12 and 14 so I measured the front and back pattern pieces to work out what the finished bust and hip sizes would be, from these I opted to sew a UK12. I was happy with the final fit, there’s just enough fullness without becoming too voluminous and baggy. I’m 5’5” tall and a little ‘pear-shaped’ but this style would suit a variety of body shapes because it skims over the waist and thigh area, it isn’t a ‘fitted’ style. The elasticated sections on the hip and back give the slightly-cocoon shape some definition and this could be adjusted to your personal preference. I’ve gained few pounds since I last summer but the dress still looks okay I think.

At Eltham Palace in south London, summer 2021

The one major adjustment I made was to shorten the pattern by 5cms before cutting out. I read a few online reviews before I started which all said they wish they had, or they did, make it shorter. I’m happy with how the finished length looks on me, it would definitely not have looked right if I’d left it as it was. I took the 5cms out horizontally across the front and back just below the hip/knee area, not from the hem. If you shorten it from the hem you will make the shape at the bottom a little wider which might result in it losing a little of its ‘peg’ shaping. The only other thing I did was to slightly raise the position of the elastic channels on the back and hip by approximately 1.5cms so that proportionately they sit a little higher on me, I think it looks better. 

An easy hack would be to use a narrower elastic than suggested, or sew two or more rows of narrower elastic into channels, you could even use shirring elastic. Instead of elastication how about slotting ribbon or tape through the channels, sew buttonholes for the tape and leave the ends dangling so that they are decorative and adjustable, perhaps finish the ends with small toggles to make a feature of them? Leave the sleeves off completely maybe or turn them into full-length sleeves with elasticated cuffs, or a cap sleeve. If you’re feeling adventurous you could even elasticate the hem! What about having fun playing with the grain line, especially if you use a check or striped fabric. There aren’t any pockets so you could add at least one in-seam pocket, probably on the non-elasticated side seam.

As well as viscose-types like I’ve used you could also choose fabrics such as handkerchief or washed linens, crepe, softer types of satin, crepe de Chine, challis and wool crepe. Softer cottons like lawn or chambray-types would all work well too. You don’t want anything overly stiff or thick because you wouldn’t get the lovely definition to the elasticated folds, they could become a bit clunky. Ideally avoid fabrics which crease badly if you might be sitting in it for any length of time, creases would spoil the look of the front. 

I chose to trace off the pattern, I find I’m doing this more and more often even though I’m not a big fan of doing so. Take your time if you’re tracing the pattern, transfer all the markings accurately. Because the neckline is asymmetric make sure you cut the neck facing to match and double check you have a mirrored any pieces that are a pair before cutting into your fabric. Read through all the making instructions before you start and highlight any areas that you think are, or might be, trickier for you. 

The Asymmetric Gather dress isn’t a difficult garment to sew up, I would say anyone from an adventurous beginner upwards would enjoy making it. It certainly took me less than a day to make, especially as there are no openings like zips or buttons to construct. 

I’ve found it entertaining to see my changing hairstyle since I first made this! I was paid for the original article last year but all thoughts, advice and opinions are my own.

until next time

Happy sewing

Sue

Merchant & Mills Fielder Top

The Fielder top and dress by Merchant and Mills has been around for at least six years I think but I only bought my copy from Anne NewVintageSewing just last year when she was having a destash sale.

Essentially it’s a raglan cropped-sleeve sweatshirt or dress with ribbing cuffs, hem and neckline. The sleeves have darts at the shoulder to give them some shaping and the neckline is quite scooped out. Most of the sweatshirts I’ve made in recent years have been quite baggy and over-sized so I thought I would try the closer fit of the Fielder for a change. Based on my own body measurements and the finished measurements given on the packet I opted for a UK size 12, and I lengthened the sleeve to be wrist length.

I bought the unusual ‘quilted’ fabric from the M&M stand at the recently-revived Knitting and Stitching Show at Alexandra Palace in London. It was so good to be able to browse a whole selection of stands once again, it had been over 18 months since any of us were last able to do that. The colour reminds me of old-fashioned sticking plasters, the triple-layer fabric is a clever weave but the loose threads through the middle layer do come adrift quite easily. Because of this I overlocked every piece around its edges to prevent further disintegration. I also stay-stitched the neck edge before it had a chance to stretch.

I couldn’t get any ribbing in a colour I was happy with but I found this brilliant wide elastic in MacCullogh and Wallis with it’s pink/beige stripe blending into black.( Can’t find this exact product on their website, I bought it in-store, they do have similar items online though) The next challenge was how to attach it without losing any of the colours.

I tried out laying the elastic over the top of the overlocked edges like this and that seemed satisfactory. I lined up the pink stripe with the O/L stitching underneath which created a suitable overlap.

I tried out a few stitch options and settled on this closed overlock on my Pfaff

It calls for the blindhem foot to be used which meant I could follow the red guide along the stripe.

The finished stitch is nice and stable and looks good too.

The next challenge was neatening the neck but, as you can see from the photo above, the width of the elastic meant it stood away from the neck and was all wavy.

I pinned it on though and had a ponder on how to solve the issue while I went out for a run….

I came up with the idea that if I could get rid of the fullness on the outer edge (like I’ve pinned it out here) then that might work. I sewed the elastic on in the same way I had on the cuffs and hem and pinned evenly and in alignment with each line on the check design.

Next I folded and pinned each pleat evenly, the chalk line and pencil marks where I would start and finish the line.

I used the width of the presser foot as a starting point to sew down to the bottom of the triangle.

a completed triangle.

This is how it looked after I’d sewn all the triangles and I was pleased with the result. The idea worked but now the triangles weren’t flat inside against my neck.

I tried topstitching each one from the outside to see if it would flatten the triangle sufficiently.

It worked! I pushed them all the same way instead of having some going in one direction and some the other.

The end of the elastic was folded over and stitched with two lines at the CB, it ain’t perfect but I’m pretty pleased with end result! I thought I was going to have to settle for an alternative ribbing/binding of some kind on the neck which wouldn’t have linked so well with the hem and cuffs so I’m delighted with how well this has worked out.

I added this gorgeous little label given to me by my friend Alana (and available from Rosy Little Cheeks) on the back, I think it’s perfect, and true!

I haven’t mentioned the rest of the garment construction because it’s a very straightforward sew, I just made it a bit harder for myself…but in a good way.

As I said in an Instagram post, whilst I’m really pleased with he finished result as a garment, I’m not 100% convinced about the fit yet. The fabric is an unusual alternative to traditional sweatshirt fabric, although it creases more and there’s no stretch either but I think it will come to like it. I’ve got plans to make a plain white button-up shirt to go under things this winter (most of mine are over-sized like the sweatshirts!) so I’ll probably layer it up under this, or a roll-neck perhaps?

Anyhoo, that’s one way to elevate a plain top into a slightly more interesting one (IMO!)

Until next time, Happy sewing

Sue

Tips for sewing with linen jersey, a new Lamazi post

Did you know that linen jersey was even a thing? It’s an unusual fabric which you don’t see often, we all know knits are available in most other fibre types-cotton, wool, silk or man-mades for example- but I’ve never worked with it before so when Liana invited me to sew my next Lamazi project using it, and to pass on any hints and tips for sewing it, I was up for the challenge. 

This 100% linen jersey comes from Mind the Maker in a range of colours and I picked the Dry Mustard shade which is a lovely vibrant ochre. The fabric has a beautiful lustrous sheen on the right side, the reverse is duller so it makes it much easier to tell the difference between the two. It has lovely light drapey quality too and is slightly sheer.

Linen fabric is not a textile known for its inherent stretch qualities and this jersey does feel slightly different from other knits because it has only a small amount of stretch along its length and quite a lot of stretch across the width but it has very little recovery so once it’s been stretched out it will stay like that at least until it’s washed again. During construction the application of plenty of steam will encourage some of this accidental stretching to be eased back into position so, coupled with its sheerness, this means that you need to think carefully about what garment to sew with it. 

Plenty of steam will help remove most unwanted bagginess like this

The properties of linen fabric itself [cool in warm weather, warm in cold weather] mean that it would be ideal for loose-fitting leisure or exercise wear, for yoga or Pilates for example. I would definitely say it’s better to avoid anything that is particularly close fitting because areas like the elbows or wrists would become stretched or baggy with little recovery. However the fabric has a lovely drape and its fine gauge allows it to be gathered up successfully so these properties could be exploited instead.

Bearing all these factors in mind I decided to make (another) Sewing Revival Heron dress which I would hack into a blouse. The pattern has a neckline which is gathered using elastic along with raglan sleeves with deep elasticated cuffs. To mix it up further I decided to pull the hemline in onto elastic rather than have a wide smock silhouette.

First things first, I washed the fabric by hand to remove any risk of excessive shrinkage or twisting in the machine. If you want to wash it in the machine then it might be an idea to overlock the cut ends together first to form a long loop and place it into a large washing bag to protect it further. Alternatively you could press it on your ironing board with plenty of steam instead. If at all possible it is better to dry the fabric flat, and certainly don’t wring or twist it. All of this might sound off-putting, and it is clearly not as straightforward as chucking a nice stable cotton into the machine but this is a luxurious fabric and deserves to be treated and handled carefully in the preparation. When it comes to cutting out your pattern pieces lay the fabric as flat as possible, handle it gently and don’t pull it about too much, especially if you decide to fold it. I made a whole back pattern piece for my top so that I could cut it flat, another appeal of the Heron pattern for me is that it has just three pieces so it’s a relatively quick sew usually. 

After cutting all the pieces the first thing I did was stabilise all the raglan shoulder seams using some iron-on seam tape, I did this to prevent any unwanted stretching before I sewed the sleeves in later on. I added small squares of iron-on interfacing to reinforce the bottom of the opening on the centre front seam too. I also decided to press all the folded parts of the casings/ruffles for the neckline, sleeves and hem before sewing anything together, just so that I was handling the cut-out pieces as little as possible, again to prevent unwanted stretching before they got joined together. I also tacked these folded parts into position temporarily. All this might sound excessive but I wasn’t in a rush, and I found the slow and considered processes very soothing at quite a difficult time. 

iron-on stay tape to prevent unwanted stretching of the raglan seams

• 

  the pinned raglan seams showing the slight excess to be absorbed

• 

  the finished seams inside the garment

I pressed and tacked casing/ruffles before joining the sections together later on

reinforcing the bottom of the neck opening with small squares of iron-on interfacing.

Something else I did before commencing was check on fabric scraps which needle and stitch-type would give me the best results. A ballpoint needle suitable for stretch/knits/jersey is essential to prevent snagging which could lead to laddering of this delicate fabric, and I found a short straight stitch was better than a narrow zigzag but you must do what works best on your own machine. You could sew a garment together entirely on an overlocker but be aware of the lack of rebound this fabric has so if it gets stretched or misshapen while it’s being sewn then it’s probably like that permanently. I also tested the overlocker finish before diving in for the same reasons. If you don’t have an overlocker this fabric is fine enough that where possible you could probably sew self-neatening French seams, or a wide zigzag might work but just be careful it doesn’t chew up the edges. If you have an overlock stitch option on your sewing machine and/or a special foot to sew an overlock-style stitch then definitely use them. Test all options before making your choice, the time taken could save you upsets later on. I slipped some folded strips of paper underneath the seam allowances when I pressed them to minimise any chance of the seam showing through on the front

testing stitches and overlocking

I popped two strips of folded paper under the centre front seam while I pressed it so that there was no show-through or unwanted shininess on the right side.

If you have a walking foot for your machine this is definitely a fabric worth using it for, even if you don’t it’s a good idea to use plenty of pins. I’m not a fan of mini-clips because I think they are too heavy and get in the way, this fabric is lightweight and I think mini-clips could distort it while you’re sewing but it’s up to you. Tacking seams is always an option too of course, any technique that prevents the fabric shifting while you sew basically.

If you’ve followed my blog for a while you’ll know I’ve made a few Herons before so the construction was straightforward, the only area I did differently was to create the ruffled hem with a wide elastic casing. I couldn’t decide between my planned 2cms or 1cm wide elastic initially so I tested with the two widths to see which I preferred-I chose to stay with the 2cms width as planned. 

testing which elastic width I preferred for the hem, this was the narrow one (the fabric scrap is wrong side out!)

and this is wider width, it’s the one I used at the hem in the end.

using a bodkin to insert the narrow elastic in the neck casing.

checking the gathered neckline on the stand

I used this quilting attachment on my machine so that I sewed an accurate parallel width for the elastic casing

close up of the elasticated hem casing

To sum up, I’m really pleased with how my first experience of sewing with linen jersey has gone, I’ll admit I was a little nervous because Liana was putting her trust in me with an expensive fabric but taking the time to plan and test, and use my existing knowledge of working with knits definitely helped. Because of the sheerness of the fabric Lamazi also provided me with a metre of Atelier Brunette crepe viscose in Ochre to make a camisole to wear underneath, I used the Simone camisole and trousers pattern by Maven which is a very quick make and a very useful garment to wear on its own or underneath other garments. The crepe viscose is a beautiful quality fabric with lovely handle and drape but be aware that there’s a disappointing amount of creasing, you might want to take that into account when planning, for example if you’re making something you’ll spend a lot of time sitting in.

all finished

As always, I hope you find my hints and tips helpful if you choose this lovely fabric, I wouldn’t recommend it to a novice sewer because some experience of sewing with other similar fabrics is definitely an advantage, plus it would be shame to end up with a costly mistake, but if you’re looking for a new challenge to add to your repertoire this could be a good start. I’ll launder the finished garment either by hand or in a wash bag on a gentle cycle in the machine. I’ll dry it flat too and store it that way, I don’t want a coat hanger to make it misshapen. If you’re a person who prefers not to worry too much about their clothes or their maintenance then this might strike you as overkill, and that’s fair enough, but I don’t think it hurts to have a few special things in our wardrobes which were worth the effort to make for ourselves. 

I’m looking forward to wearing this top as autumn is fast approaching (did summer ever arrive!?) thank you to Lamazi for providing me with the fabric to review.

Until next time, happy sewing,

Sue

Fantail follow-up!

I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.

the first Fantail top

This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.

There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.

I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.

Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]

Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.

The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.

Pin the side seams together like so first, the raw edge of the deep elastic casing for the front is already pressed up by 1cm and the bottom of the ribbing is lined up against the notch for the casing.

Next, fold up the front so that it sandwiches the ribbing like this, pin in place. Now sew the seam starting at the fold on the hem. If you haven’t used this method before you may want to sew one side first and check it to make sure you’re happy with it, it can be a little confusing initially but it’s worth persevering.

Turn the hem to check it is level and, if you’re happy with it, neaten the seams however you wish. This is before I neatened the side seam but it will look like this on the inside.

The outside will look like this, so neat!

One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.

At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]

The ribbing is currently not edge-stitched in case it causes puckering

I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.

Until next time, Happy sewing

Sue