Italian cloth and hacking a ‘vintage’ pattern

First a bit of preamble, because the origins of the fabric I used for this top were important. In June 2022 me and Mr Y were finally able to return to mainland Europe again for a four day stay in Florence, one of my favourite cities. We knew it would probably be very busy with visitors during the summer but frankly I didn’t care about this, I was just so happy to be able to see all those magnificent buildings and beautiful art again.

In between looking at the art and strolling the ancient streets I indulged in a little window shopping at the stores where I can afford literally nothing, including Alexander McQueen, Missoni and Gucci.

I could get a closer look at the details in the Gucci store that is based in the Gucci exhibition (worth a visit)

Missoni….obviously, look at that extraordinary panelled dress

Alexander McQueen…be still my beating heart

Amongst all these shops though I *may* have come across a fabric emporium….In truth, there are quite a number of fabric shops in Florence, what with this being Italy and home of fabulous quality textiles.

I failed to make a note of the name of this particular shop but it was very close to the Duomo and the Baptistry. I didn’t go in (thankfully it was shut at the time!) but they clearly specialised in very high-end alta moda fabrics which were nowhere near my budget!

Stunning beaded silk cloth

I had, however, been given the name of another more accessible shop by a kind Instagram follower so we set off to find it with only the vaguest idea where it was. Bacci Tessuti is quite close to the Medici Chapel and San Lorenzo and, with a little help from Google Maps, we found it eventually.

The air-conditioned shop was a very welcome haven from the extreme heat Florence was experiencing during our visit and I was not disappointed by what I found, there is a wonderful selection of lovely cloth to browse.

The choices in a beautiful store like this can be quite overwhelming so I had a sort-of plan to buy something which felt ‘Italian’ to me. I set out looking at their fine linen, personally I would call it handkerchief linen and it’s much lighter and softer than most of the heavier and more durable linens I’ve seen on sale in the UK. I homed in on one with a large design in blue, red and pink flowers (I love a floral fabric but I don’t often wear it) but this one ’spoke’ to me. So that was great but then the helpful shop manager, who spoke excellent English, pointed out the Liberty Tana lawn he had at a very good price! I would have resisted but my husband wanted to buy some for me so who am I to turn him down!

These were going to be my total purchases but when I went over to the counter the manager told me that the linen cloth was by the textile designer for well-known Italian brand, Pucci. At this point he produced from under the counter several short length pieces of some beautiful Italian designer fabrics including Dolce and Gabbana! They were all very lovely (and still expensive) but I wouldn’t have a use for them. The one I did fall for though was a small piece of silk/cotton cloth from Pucci with their trademark psychedelic design in delicate ice cream shades. It still wasn’t cheap but it was just a bit different and there was enough to make a top of some kind. So of course it came home with me…

it’s a bit crumpled from the wash after I got it home

The linen is on the left, plus the two pieces of Tana lawn bought by my husband, and that was my view from the hotel in the background, straight over the Arno with the Ponte Vecchio just to the left.

With my purchases safely stowed away we got on with enjoying the rest of our holiday (although I spent a fair bit of time planning in my head what I was going to make when we got home!)

Initially I was going to use this ‘vintage’ Style pattern as is (I bought it new in 1988 so it’s a little upsetting to think of it as vintage!) I used it several times back in the day, and I’ve sewn it again a couple of times in the last few years. The back buttons are the feature I like, the rest is basically a woven T-shirt.

As I said earlier, I had no more than 1m30 of fabric to play with and I still wanted to do a decent job of matching the print as best I could. The basic pattern fitted on the fabric, it’s only a front, back, sleeves and facings, but I thought it might look a bit meh, and there would still be some wastage. After a bit of a rethink, by shortening the body and making two deep ruffles across the width of the fabric I knew I would get a much more interesting design and have very little wastage in the end.

Basically it was a case of working out how long I could afford to make the top section and still get ruffles that were a balanced length [I had the Merchant and Mills Florence top in my head as inspiration] I took a line horizontally straight across to the centre front/back from the side seam approximately 15cms down from the bottom of the arm scye of both the front and back. What I should have done if I had stopped to think about it was make the centre front longer, I didn’t though and as a result the front hem lifts up because of my bust. The back is fine though.

The first dashed line is roughly where I folded out the pattern to make the horizontal seam, the curved dashed line on the front is how I should have shaped it.

I was able to cut the front and back pieces side by side on the folded cloth which meant the design ran smoothly around the garment. From the remaining fabric I calculated how deep two full widths of the fabric could be (approximately 28cms each strip) and still have enough to get two sleeves and the neck facings out too.

Once I had all the pieces it was just a case of assembling. First I did my usual scavenge through my button boxes to find enough suitable colours in matching sizes. After joining the shoulder seams and attaching the neck and back facings I sewed all the buttonholes at this stage, by doing this first it meant I wasn’t fighting the bulky seam of the gathered ‘skirt’ later.

My usual mash-up of various buttons down the back

By sewing the buttonholes at an early stage meant I didn’t have to struggle getting the bottom one under the buttonhole foot with the gathering in the way.

All finished. I know I’m just being fussy but you can probably see what I mean about the top rising up at the front slightly. There is no bust dart on the pattern which would have made a difference.

I’m pleased with how the top uses almost all the fabric and shows off the print to good effect, I didn’t want to chop it up unnecessarily and there weren’t many options with the small quantity I had anyway. I had to use a very narrow pin hem on the ruffle to maximise the length, the sleeves had their normal hem allowance on them. If you want a few more ideas for finishing hems I wrote this blog a couple of years ago which you might find useful.

I opted to have the ruffle run straight across the back rather than have an opening (this was because I was being lazy and didn’t want to make a facing and sew more buttonholes!!)

The top is shorter than I’ve worn in the recent past but I like the look, especially with the flat-fronted Eve pants by Merchant and Mills

Out in the wild at Africa Fashion which is on at the Victoria and Albert Museum in London until 16/4/23

As for the other Italian fabrics, I have plans to make a shirt dress with the beautiful linen, I have a design I’ve drafted and sewn a couple of versions of but there’s probably still a few tweaks I want to make to it before making it in the ‘real thing’. The Liberty lawn is waiting for the right project to present itself too, no need to rush these things. I’m all for sewing the good stuff but it’s really upsetting if you sew a dud with it!

Until next time, happy sewing

Sue

Fantail follow-up!

I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.

the first Fantail top

This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.

There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.

I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.

Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]

Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.

The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.

Pin the side seams together like so first, the raw edge of the deep elastic casing for the front is already pressed up by 1cm and the bottom of the ribbing is lined up against the notch for the casing.

Next, fold up the front so that it sandwiches the ribbing like this, pin in place. Now sew the seam starting at the fold on the hem. If you haven’t used this method before you may want to sew one side first and check it to make sure you’re happy with it, it can be a little confusing initially but it’s worth persevering.

Turn the hem to check it is level and, if you’re happy with it, neaten the seams however you wish. This is before I neatened the side seam but it will look like this on the inside.

The outside will look like this, so neat!

One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.

At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]

The ribbing is currently not edge-stitched in case it causes puckering

I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.

Until next time, Happy sewing

Sue

Pfaff air threading and a Tesselate Tee!

There’s a lot going on in this post because I’m offering you my thoughts on not one product but three! 

So, a bit of background first…I used to be a keen runner but various injuries forced me to stop and then I never quite got started again. Fast forward at least 3 years and I’d gained weight which I wasn’t happy about, I felt sluggish and lacking in energy, I wanted to lose the weight for the good of my health and mental wellbeing. So, coming up to date, the return to running is going well (if cautiously…) and I’m losing some weight which in turn has inspired me to try making some of my own activewear. Fortunately for me Melissa Fehr of Fehrtrade has become a sewing friend of mine since first meeting her at the Sewing Weekender a few years ago and she generously offered me a copy of her Tesselate Tee pattern to try. I’d helped test her Rouleur leggings last year so I already had that pattern. Part of the beauty of Melissa’s patterns is that she gives you really comprehensive instructions to be able to sew activewear using just a regular sewing machine if you don’t own an overlocker. I’m in the fortunate position at the moment to be a Pfaff Brand Ambassador and I have their air-threading Admire Air 5000 on loan, along with a Coverlock 3.0 as well so this all seemed like the perfect opportunity to make some new running kit. 

Suitable activewear fabric is not something I have in my stash other than the scraps left from testing the Rouleur leggings so I had a little online search and came across Frumble fabrics. They have a good range of activewear fabrics at competitive prices as well as an impressive selection of suitable elastics and other trims or haberdashery you might need for this sort of project. I bought a metre of plain navy fabric and a metre of navy camouflage print, along with navy soft waistband elastic, some navy fold-over elastic and, finally, silicone grip elastic. [One point I should add here is that I decided not to pre-wash the fabric, this was based on my own knowledge and belief that synthetic fabrics are usually more colour-fast than natural fibres. I was wrong. The navy came off on my hands as I was making it up so as soon as I finished both garments they have been through the wash after all. I have alerted Frumble so I’m not saying anything here that I haven’t already fed back to them. Overall I’m pleased with the fabric quality and I learned my lesson-prewash even if you think it doesn’t need it!]

I opted to go for a medium size Tesselate top, Melissa has recently layered the pattern so now you only need to print off the size or sizes that you want, I wavered between small and medium according to my measurements. The small probably would have been fine but the medium gives me a little more room without the constant thought that I should be sucking in my wobbly bits! One of Melissa’s USP’s with her patterns is interesting seam lines which means, as well as striking designs, you can often use up small pieces or remnants of suitable fabrics. The Tesselate has a variety of options including short or long sleeves, thumb cuffs, a hood (with ponytail hole!) and back zipped pocket. 

I cut the leggings a mixture between small and medium and I’m happy with the fit of the end result. I had enough fabric for long sleeves on my Tesselate and, although there’s a pattern for the back pocket, rather than print it off I made my own. 

I opted to put the pocket in the back left diagonal seam because I decided I could reach it comfortably behind me and use the zip easily whilst moving if necessary. I drew onto the pattern how big it needed to be to accommodate the essentials.

I placed spot and cross paper over the top and traced off the shape, adding 1cm seam allowance to it.

a new pocket bag labelled and ready

I played around with the fabrics until I was happy with their placement, I had enough of the blue spotty fabric for the back and front side panels, everything else I divided between the two navy fabrics.

Because I was going to be sewing a fair bit of the garments together directly with the overlocker I join the pieces with the pins at least 2-3cms away from, and parallel to, the cut edge. Then it’s safe to sew without the pins being anywhere near the blade.

I’ve made another little video to demonstrate how the air threading works on the Pfaff, you’ll need to bear in mind that it might seem like it takes a while to thread and so where is the advantage in air threading but that’s because I’m trying to explain as I go and I was sitting at a funny angle behind the camera whilst I did it.

After two years of owning the Quilt Ambition 2.0 (now discontinued) I’m used to the quality of Pfaff machines so it doesn’t surprise me that the Air Admire is sturdy (no shifting about on the table while you sew) and very speedy, with a superb quality of stitch. It doesn’t take long to get to grips with the air threading and, as I mention in the video, there’s an automatic threader for both needles too! I couldn’t get the hang of that at all to start with but it’s amazing what a difference it makes if you read the instructions and follow them! Of course, this is an expensive machine and I understand that not everyone will have that kind of budget but if you are considering an air threading overlocker (there are now a lot more models on the market than just market-leader Babylock with prices gradually coming down) then this one is most definitely worth thinking about.

I inserted the invisible zip on the sewing machine, then attached the pocket bag that way too. The T-shirt goes together pretty quickly considering the number of pieces-most pieces are cut singly because they are asymmetric-if you’re using the same fabric throughout it would be an idea to label your pieces in some way so you don’t get them mixed up.

I find it very useful having a variety of stitches to choose from especially when sewing with stretch fabrics, the 3-step zig zag was ideal when I was sewing the elastic into the waistband, I also have an ‘elastic’ stitch which is useful. A lot of machines, even quite simple ones, will probably have a stitch option which will enable you to sew activewear so why not try out a few of them to see exactly what they are, the instruction book should be helpful, or there’s so much information on the internet too.

The finished waistband on the leggings, elastic is completely enclosed in a seam at the top and then I’ve secured it further with a 3-step zig zag stitch

I’ve joined the elastic for the legs into loops which are then sewn to the right side of the fabric, matching the edge of the elastic to the cut edge of the fabric.

I used a small zig zag to stitch it in place. This then flips to the inside and I coverstitched it along the top edge.

To neaten the hems and around the neck I swapped over to the Coverlock 3.0 which I had on the coverstitch setting. Again, this is a very sturdy piece of kit with excellent stitch quality, I am finding there is a certain knack to using it and I’m by no means an expert yet but it certainly gives a very professional finish to knit, jersey or stretch garments.

The Rouleur leggings also have large side pockets which are perfect for holding your phone and/or keys etc (Betsy getting in on the act again too)

As always, I hope you’ve found this helpful, I always try to be honest about how I get on with a product whether or not I’ve been gifted, loaned or purchased it-all three in this case. If you’re tempted to have a go at activewear then Melissa is a good place to start-she’s even written a book on the subject so you’re in good hands!

Until next time, happy sewing

Sue

Pfaff Coverlock 3.0

It’s been almost a month since I was loaned a Pfaff Coverlock 3.0 to try out so thought I would give you a ‘half-term report’ on how I’m getting on with it.

First thing to say is that it’s quite a beast! It’s a very substantial piece of machinery and so is fairly heavy as a result. That being said, this is normally the case with coverstitch machines because they are generally bigger than overlockers so the weight isn’t unusual. It does have a good-sized and comfortable carrying handle though.

Ok, so, the Coverlock 3.0 is a combination machine in that it is both an overlocker and a coverstitch machine. I’m sure you already know that an overlocker will trim and neaten raw edges and often sew the seam as well if you have 4 or 5 thread version. What you may not know is that a coverstitch machine doesn’t trim any edges, it will sew two or sometimes three rows of top-stitching on the outside of a garment whilst covering the edge of the fabric on the inside with loops of thread to ‘cover’ it. It has the advantage of being stretchy too. If you’re still not sure what I’m talking about have a look inside the hem or cuffs of a RTW jersey garment and you should see.

The first thing I had to do was not only rethread the machine as it didn’t arrive pre-threaded but I also needed to change it’s function from coverstitch to overlock. A major part of what I want to assess for you is how quick and straightforward it is to go between the functions. This is partly why I didn’t plunge in with a review as soon as I got it because I didn’t think it would be balanced or fair. Indeed, I will certainly write another review in due course after a decent amount of time and usage has occurred.

Yay! I threaded it successfully!!

Because the machine was merely delivered to me without any demonstrations I’ve needed to use the instruction book a fair bit. If you have difficulty following written instructions and/or diagrams this may not be ideal for you but there is a (silent) DVD included with very clear animations of exactly what you need to do for each of the stitch variations possible. [I didn’t find this straightaway though so I muddled through with the booklet! I’ve also since found a few very helpful You Tube videos which were useful]

I’m not going to lie, it does take a bit of time to make the changes because you’ll need to remove and reinsert the needles to different positions as well as thread the machine in different ways depending on the function. This will eventually take me less time and I’ve added Post-it notes to the relevant pages in the book so that I don’t have to keep searching for the two I’ve favoured most. The machine is capable of up to 23 stitches using 2, 3, 4 or 5 threads and up to 3 needles. So far I’ve only used the 4-thread overlock and the coverstitch but I will endeavour to use more, including the flatlock, and report back.

I decided on making a hacked version of the Tilly and the Buttons Nora top which I’ve made a couple of times before as I didn’t want any nasty complications by attempting an unfamiliar pattern with a new piece of machinery!

The beautiful jersey with an amazing ‘tie-dye’ print is from Lamazi fabrics and was my choice as a July/August maker of the month [it could be you if you tag them on Instagram] I cut the sleeve to approximately 3/4 length and also cut two cuff pieces which were again approximate, initially about 20cms in length and then my wrist measurement at one end and my mid-forearm measurement at the other. I added a couple of centimetres for seam allowance to all sides.

• 

• 

I’d definitely say you need to do a bit of forward planning if you intend to use both the overlock and coverstitch functions on a project because of the swapping between the two. For example, on my Nora I needed to coverstitch just the cuffs and the hem, everything else could be sewn either directly using the 4-thread overlock or on my Quilt Ambition 2.0. I opted to sew the top together first and complete the hems at the end, in the usual way although there may be times when it’s better to hem first, we’ll see.

I’ve been very impressed so far with the quality of the different stitches.

If you’re merely changing the thread colours it can be done in the same way as regular overlockers by snipping the threads near their spools, tying on the new colour and pulling each of them gently through, plus rethreading the eye of the needles. On one occasion when I altered the function I completely rethreaded but the stitch was much too loose-what had I done? It was all done correctly and yet it was way too loopy. I checked the manual for hints on troubleshooting but it didn’t make much difference. I was starting to pull my hair out when I realised I had threaded the machine without lifting the handle out of the way-the threads MUST go under it or they don’t sit in the tension discs! (Had I watched the helpful YouTube video first I would have known this…) Another thing I learnt the hard way was when the spool holder kept falling off the back of the machine and I was ready to chuck it out of the window I noticed it has to be slid sideways to click securely in position-doh!

The next two projects I made I didn’t use the coverstitch function as both the sweatshirts had cuffs and waistbands but I constructed much of them using the 4-thread overlock stitch. I used fabric provided to me by Minerva and they will appear on their blog in the new year. One of the patterns I used was the gorgeous Maxine sweatshirt given to me by it’s designer, Dhurata Davies. I’m going to make another one soon so I’ll write an individual blog on it then. [I got both tops out of 2.5m of fabric!]

• 

  Maxine sweatshirt by Dhurata Davies

• 

  Simplicity #8529 which is also the Toaster by SewHouseSeven

For the final project I want to talk about here I took a different approach. It’s an Amy top by Brilliant Patterns and which I’ve made a couple of times before. I had a 1m remnant of loop-back cotton sweatshirting which I bought from Sew Me Something at a show for £8 and by shortening the sleeves very slightly, cutting the neckband in two parts and joining it I got a WHOLE sweatshirt out of the one metre!!

This time I set the machine up with a wide 2-needle coverstitch and I used my regular sewing machine to sew most of the seams. What I did at each stage of construction was to press the seams flat and top stitch them using the Coverlock. This meant that there would be two rows of top stitching on the outside and the raw edges were covered on the inside. This was generally OK although as I’ve yet to ‘get my eye in’ with lining up the foot against a seam or other visual marker a couple of them do waver more than I would usually like. It turns out there is a large removable flat bed included to increase the working area (it was tucked down inside the box and I’ve only just found it!!) this will support your work while you sew but it does take up a bit more room.

I like the two-part upper back of the Amy.

The hem is level at the front and a dipped curve at the back.

So to sum up (for now) I’ve been impressed with the quality of the stitches I’ve used so far on the Coverlock 3.0 and I will definitely look for opportunities to try others whilst I have it. I’ve yet to be convinced about swapping between the stitch-types but obviously, as I get more familiar with it, I should get faster at changing between them. There are few processes which have to be gone through to make the changes but I’ll probably work out an order or procedure to follow to speed it up. If you are short of space a combination machine might be useful, they aren’t cheap though. You’ll almost certainly use the overlocker stitches more of the time so possibly changing occasionally to coverstitch will be sufficient. I would definitely say you should have a thorough demonstration of the machine so that you know what is involved and what it is capable of. Unlike washer/driers which don’t do either job very well this machine does both functions to a very high standard.

Thank you to Pfaff for giving me the opportunity to try out their machine and if you have any questions about my experience so far then do ask.

Happy sewing

Sue

Tilly and the Buttons Nora top

I’m very excited to have been offered a copy of one of the new Tilly and the Buttons and I jumped at the chance to try Nora, a drop shoulder jersey top with several variations of sleeve, neckline and length. It’s just the sort of top I like to wear, often layered up in colder weather so I thought you might like to know what I think about the pattern.

keeping the design under wraps before the launch.

For once I decided I would trace off the pattern first because I’ll probably want to use several of the variations but this time I wanted to start with the long sleeve, uneven hem version.

Initially I checked my measurements against the sizing chart, and then the very useful finished garment measurements chart too. It’s always helpful if patterns have this (‘big 4’ patterns usually have them printed directly on one of the major pattern pieces) because you can make a much better judgement of the size you want. Take a tape measure and hold it around your body using the finished garment measurements to see how you feel about the fit-too loose? too tight? I opted to go down a size from the one indicated by my body measurements because I felt the finished top would be plenty big enough.

I had some lovely loopback sweatshirting in my stash that I’d bought from GuthrieGhani at last year’s one and only Great British Sewing Bee Live in London. It had been destined for a top based on one I’d seen at the Burberry ‘Capes’ show at the beginning of 2017 but never quite got made. When I clapped eyes on the Nora I knew the Burberry top would rise again.

I love the varied layers and stripes of this look.

In order to match the stripes, take your time laying up the fabric ready to cut. Ensure the stripes on the underneath layer are in line with the top layer by popping a few pins through both layers every so often. Next, I placed the front and back pieces onto matching stripes at the lower edges, double checking that the bottom of the armhole was also the same. I didn’t cut the sleeves out at this time, I waited until I had the front and back sewn together at the shoulders and the neck band attached before doing this. This way you can have your actual garment laying on the fabric next to where you’re intending to place the sleeve pattern, I cut each sleeve separately to make absolutely sure.

Tilly’s instructions and photos are generally very clear and helpful in my experience. I’m not sure if I did the neck band in quite the same way as the instructions but it worked and looks good. Different knits and jerseys have differing amounts of stretch so you may need to adjust the length of the band you use. I made mine shorter in the end as it wasn’t sitting flat at first, the band needed to be more stretched onto the neck edge to sit nice and flat.

I’ll take that!

The beauty of the sleeve on the Nora is that it’s a ‘shirt sleeve head’ so it’s almost flat across the top. This means it’s very simple to sew on because there’s no tricky setting into an armhole to do, you sew it on flat and then join the underarm and side seams afterwards. Incidentally, I sewed most seams using the tricot stretch stitch (looks like lightening in the symbols if you’re looking for it on your machine) You could also use a zigzag that’s very flattened out by reducing the stitch width. Alternatively, you could sew most of Nora together using an overlocker but don’t forget the seam allowances are 1.5cms and an overlocker will be much narrower which could result in a bigger garment than planned if you don’t trim them down first.

Before I hemmed the sleeves I tried the top on and opted to bring the sleeve width at the cuffs in by a total of 6cms [only as far as the elbow though from where I graded back into the original seam] Although the cuffs were a bit too wide for my liking I loved the extended length which comes some way over your hands.

That just leaves the stepped hem. I used a twin needle to sew straight across the hems and a regular ballpoint needle to turn the side seams.

Before I started Nora I’d already decided that I’d wear a shirt under the stripy version because the front is actually a bit higher than I like so, when I make my next one, I’ll lengthen the front somewhat but still keep a ’step’. I’ve been wearing it with my favourite The Maker’s Atelier Holiday Shirt underneath and I love how it looks together. I bought some beautiful Liberty fleece-back sweatshirt fabric from Fabrics Galore at the recent Knitting & Stitching show which I’ll use to make the Nora with the high roll collar instead and the long cuffs will roll back to show the contrast colour, it’s going to be so cosy. I reckon you could make it in a drapey woven fabric too BUT  you’d have to make the neckline larger because you wouldn’t get your head through otherwise!!

No make up selfie in Threadquarters! I really like all the hem interest going on.

Thank you Tilly for the chance to try out Nora, I’m definitely a fan and I think there will certainly be a few versions of her finding their way into my wardrobe over the autumn and winter…and then there will be short-sleeve versions when the spring arrives!

Until next time,

Happy sewing

Sue

 

Adapting a vintage shirt pattern into a dress.

Sometimes makes jump to the top of the queue just because the fabric grabs you, this is one of those makes. At the recent Sewing weekender Stoff and Stil generously gave each attendee 1 metre of fabric in their goodie bags and mine was this pretty vintage-toned georgette. It doesn’t take a sewing genius to notice that my dress took a lot more than 1 metre! My lovely friend and neighbour Elizabeth @eliza_sew_little and Melissa @fehrtrade had the same fabric and it wasn’t to their taste so they gave me theirs too.

What to make? Because of it’s drapey sheer qualities I wanted a style that exploited these features without being over-clingy, but also the fabric was in three separate pieces so I had to work within those constraints. It needed to be something where the top came out of 1 metre and the skirt came out of the other two metres. In the back of my mind I remembered an 80’s shirt pattern that was in my collection, I think donated to me by my neighbour although I have plenty from that era myself, it’s when my sewing life properly started so I still have virtually every pattern I ever bought!

Monster shoulders!

I like the horizontal seams and the simple T shape.

I had enough fabric to use style B with collar C and the pockets from D.

1986!

My original drawing had buttons all the way down but I got cold feet about putting that many buttonholes into georgette so I settled on a plain gathered skirt instead.

My neighbour had obviously made it at some point in the past as the 14 was already cut out so I just went with that, the 12 would have done though.

Georgette is a bit wriggly so take your time cutting it out, try and keep it as flat as possible on the table and don’t shift it about if you can avoid it. Pin carefully (I’m not a weights person) and sharp scissors are vital so as not to snag or catch on the fabric as you cut. Because it’s sheer and lightweight I didn’t want to spoil this with clunky interfacing in the collar and front facing so I used some sheer organza that was left over from a wedding dress alteration.  This has to be basted in position temporarily while everything is put together, the stitches are removed at the end.

Take your time sewing with a fiddly fabric like this, it’s hopeless if you’re in a rush because it shifts about and is quite ‘bouncy’ when you gather it up, hence the simplicity of my design. If you want a real quality finish I’d suggest using French seams wherever possible, especially if the fabric is plain because the seams will show through however because my fabric was patterned and I was being lazy I overlocked! Fine or sheer fabrics can pucker a little so use a fine needle and smallish stitch, not all machines handle sheer fabrics well though so you could try sewing with a layer of tissue paper underneath, tear the tissue away after you’ve sewn. If the needle pushes the fabric down into the needle plate you could try a foot with a small hole in it rather than wide hole (like a zigzag foot) that might help, or you can put a bit of masking tape over the needle plate to reduce the size of the hole and so reduce the risk of the fabric being pushed down it.

Once the top part was all put together I simply joined the other two remaining pieces of fabric at the selvedges to form side seams and gathered the top edge to attach to the lower edge of the ‘blouse’. This made a monsterously long skirt even when I made a deep double-turned hem so I turned it once more, for my own safety!

 

The seam and the pocket aren’t actually very visible but that’s fine, I know they’re there.

oops, eyes shut haha

I definitely need to wear a slip under it, I just have an M&S nude-colour one bought after a recommendation by Karen ‘Did You make That’ about a year ago.  I love my new Superga pumps too, the metallic burgundy goes perfectly by complete chance.

It’s all a bit floaty with a gypsy vibe going on but do you know what, it’s sooo lovely to wear, very liberating!! It’s a bit ‘out there’ for me but I feel really feminine in it, it’s pretty, it’s comfortable, even with tricky fabric it didn’t take that long to make. I’ll definitely be making another in something else, or even just the shirt part because it’s a really simple collar and the horizontal seams make it more interesting, best of all it just pops over my head. It isn’t a million miles from the Deer and Doe Myosotis that everyone is making either, that’s probably where I got the idea from without realising. Gifted fabric and a gifted pattern, buttons from the stash, organza from the offcuts make this, basically, a free dress and you’ve gotta love that! I wore it to the handmade fair at Hampton Court over the weekend and bumped into Karen Ball, she’d been one of the speakers at the sewing Weekender and she recognised the fabric!

Why not have a look at your patterns for tops, blouses and shirts, can you add a skirt? It doesn’t need to be anything tricky, just gather or pleat straight widths of fabric onto the bottom-that’s all a ‘dirndl’ skirt is anyway. Be aware of the gathering properties of the fabric you’ve got though. I know georgette (or chiffon, or even cotton voile) are very fine so they can take a lot of gathering, a firmer fabric can end up too chunky and less flattering so experiment first.

Until next time,

Happy sewing

Sue

Making Burda 6914

I’ve recently realised that Burda 6914 has become a bit of a favourite as I’ve just made it for the fourth time so I thought I’d write a quick review of it here. It has 3 variations; sleeveless cocoon dress with hem darts, cocoon dress with a hem band and short sleeves, and a sleeveless top. They all feature the double pleat at the neckline and a visible bias binding neck finish. There’s no zip, it just goes over your head.

I got my copy quite some time ago with Sew Magazine but it’s still available to buy . My first version was the dress with darts at the hem and I added the sleeves. I had some wintery fabric of unknown origin or fibres in a dogtooth check so I didn’t want the short sleeves. The sleeves have 2 external darts which is an interesting feature but I wanted them longer so I increased the pattern to below elbow length simply by continuing the seam lines down to the length I wanted (sorry, it was ages ago and I didn’t take a photo at the time) make sure that the 2 seams are the same length as each other, it will gradually increase the width the longer they get. I then created new darts on the outside to absorb the fullness I had added, 5 in total.

the finished external pleats

The dress goes together very quickly, make the pleats in the front, join the shoulders, add the binding watch the instructions here as you’re told to trim the neck edge before adding the binding. 

With a striking design like a dogtooth check the bias binding at the neck will add a nice touch.

I’ve added pockets (of course) which aren’t part of the pattern. The darts at the hem are quite diddy but they give the skirt a nice shape. It’s been one of my favourite winter dresses.

Following the success of this dress I made another a few months later in a striped poly crepe from somewhere or other.

I added pockets again but as a single layer that was stitched directly to the front. 

I cut the sleeves on the cross grain so that the stripes were diagonal.

I love how the binding looks on this one but it does make your eyes go funny!

I liked this dress but I didn’t like how it looked on me. The sleeves made my arms look chunky and somehow the length didn’t feel right either-odd, because I didn’t do anything different to the pink/black dress. I wore it once and then it languished in the wardrobe for ages. Eventually I unpicked the sleeve darts and re-hemmed them and I cut off some of the skirt to the bottom of the pockets. I thought about unpicking the pockets too but that might have left holes in the front plus it would be quite a bit more work.

I’m wearing the top with my Megan Nielsen Ash jeans.

Much happier with this! I made a split hem detail and the sleeves are so much better.

Version 3 was made with 1 metre of viscose fabric which had been donated by Stoff & Stil in the second Sewing Weekender goody bags. Because it was 150cms wide I managed to get a top with short straight sleeves to which I added a short frill.

I hemmed the frill using the rolled hem on my overlocker so that it lost barely any fabric. The neck has a button and loop closure.

The latest version is made in a lovely 100% organic cotton lawn which I bought on impulse at the Sewisfaction Big Summer Stitch Up in July. I’d earmarked it for yet another Camber but changed my mind.

I tried out the ‘fork’ pleating method on the sleeve hems this time. I made a long strip of fabric gleaned from the leftovers and neatened them first with a rolled hem finish again. It’s a really simple method and I don’t know why I haven’t used it before. I think some people use the fork to create the pleat first and which they pin in place before sewing but I did it directly in the machine, just needing to be very careful that the needle didn’t hit the fork!! In truth the strip I made wasn’t quite long enough and I ought to have added a bit more but I’d already hemmed it and couldn’t be bothered. It just meant I had to juggle the pleats a bit to get them relatively even, it really isn’t that noticeable (I hope) If you’re good at maths you might be able to work out the ratios for this….I’m not and I didn’t… 

I used two buttons in similar colours to the print, one on top of the other. I always make a hand-sewn loop, it’s usually the last thing and I find it quite a soothing, peaceful way to finish a make.

There’s an option for a double binding at the neck which I used this time. I think I like it but it doesn’t sit flat like the usual method.

It has a pretty hand-painted look to the design, the background colour is a little more Eau-de-Nil than it looks here. 

Knowing me this probably still isn’t the last of Burda 6914. One thing I keep forgetting is that there’s slightly too much ease in the sleeve head and I have to adjust the armhole so just watch out for this.

Have you got a favourite quick pattern that you go back to time and again? This isn’t a taxing make and there are times when I think I should push myself more with more complex makes but this is a satisfying garment to wear which is why I keep returning to it.

Until next time,

Happy Sewing

Sue 

Rounding off Me Made May

Did you take part in Me Made May? At the outset I pledged to try and wear at least one self-made garment every day during May and, by and large I achieved that. I say ‘by and large’ because although I definitely wore a me-made item of clothing every day there was the odd occasion when I failed-or couldn’t be bothered-to take a decent photo!

The first few I managed by balancing my phone on top of a loudspeaker and setting it on a 3 second timer. This proved imperfect and the novelty quickly wore off when it fell to the floor for the umpteenth time!

Anyway, here goes…

May 1st was a mash-up pattern, bodice of one, skirt of another, in Queue for the Zoo Liberty Tana lawn worn with a Jigsaw sparkly cardigan.

Day 2 was a Burdastyle magazine top made in a floral scuba fabric and the back in crepe-back satin. I made it at least 2 years ago but haven’t worn it much as the cuffs were a bit flappy.  By the time I wore it to the first London Stitchers meet up that evening I’d taken them in considerably and I was a lot happier with the fit of the sleeves. The jeans are the Ash pattern from Megan Nielsen which I’d had the pleasure of testing and I’m a huge fan of them.

Day 3 is the first newly made garment and it’s the Farrow dress from Grainline which I wrote a review for in Sew Now magazine 18 months ago. I made this version in navy and burgundy linen with short sleeves.

 

Neither of the next garments were new either, the red broderie anglaise was amongst some fabric I was gifted and was already cut out, I just sewed it together. The blue and white was self-drafted 2 or 3 years ago in a cotton/linen mix fabric and it’s a summer favourite of mine.

 

The georgette kaftan is new and was the try-out version of my most recent Simple Sew make for their blog.

The stripes is also the same Burdastyle top but in a striped jersey and with short sleeves. I’d didn’t like it much as a regular T-shirt but it’s been great as exercise wear!

 

Dragon dirndl, no pattern just pleated into a narrow waistband.

Awesome dragon pattern-matching and zip insertion even if I do say so myself! Bias binding and hand-sewn hem too.

Colette patterns Moneta in striped jersey with a dodgy waist (should have put a belt over that!)

One of my favourite tops, Imogen by Sew Me Something and the trousers are Butterick 6461 which I reviewed in Love Sewing magazine last autumn.

Striped Camber Set from Merchant & Mills worn with a refashioned skirt that used to be jeans.

More refashioning with a silk top made from a vintage dressing gown and a hoodie using a vintage 60’s pattern in jersey and cotton fabric harvested from a charity shop dress.

A blouse made using a vintage 70’s dress pattern in ‘Gallymoggers’, an Alice in Wonderland Liberty Tana lawn. This is a couple of years old too.

Surprised this one still fitted me! Cotton poplin from Ditto fabrics, Butterick 6026 Katharine Tilton pattern and vintage buttons. Refashioned denim skirt again.

One of my favourites, African waxed cotton with crazy diagonal stripes Simplicity Project Runway pattern 2444, all fully lined.

Love the button on the back of the neck too, it was a single one of this design in a Sewing Weekender goody bag.

Packing for our trip to Assisi, all self-made except the cardigan.

With my new car! Trusty Holiday shirt from The Maker’s Atelier in Swiss Dot and newly made checked linen trousers New Look 6351-I’m so pleased with these, they’re perfect in warm weather if your legs are still pasty like mine. (Awesome pattern-matching too but you can’t see that)

The new Farrow got to go to Italy.

Linen trousers again and the Holiday shirt in Liberty cotton voile, outside Santa Chiara, Assisi. Loving my holiday chapeau too, from Monsoon

Camber Set hack in beautiful Roberto Cavalli cotton lawn and new for the Assisi trip(RTW trousers this time)

This top was drafted from a RTW one and I extended the shoulders to form sleeves. It’s sheer georgette with a slightly sparkly stripe which I get from a market and worn with a RTW camisole underneath. I made it 3 years ago but it’s been a real favourite.

The next ‘make’ is a big old cheat because it’s the etchings I made not the clothes! I loved my visit to Sudbourne Printmakers in Suffolk, and the sewing connection was meeting Chrissy Norman the tutor at the first Sewing Weekender two years ago. take a look at her work, it’s beautiful.

One of my finished prints…I’m rather proud of it…

Linen Imogen again with a jacket refashioned from 2 pairs of Mr Y’s trousers!

 

This is only half new-I made a top from this lovely broderie Anglais I bought at Walthamstow market last year but I hadn’t bought enough and it was too snug around the hips. Luckily I managed to get a bit more so I unpicked and started again. This time I used the top half of my favourite Holiday shirt and used wide elastic in a casing under the bust to give it some shape. There was just enough for sleeves this time. I used a ‘daisy’ bias-binding to finish the neck edge and opening.

Not everything I’ve made has been an unqualified success and this teal blue dress is definitely one of the disappointments! It looked lovely on the packet but the back is ridiculous because the zip bulged out giving me a strange hump so I took it out again and inserted it in the side seam instead. Frankly it’s not much better. The top is far too wide and the V neck flaps about undecided whether it’s a V or a fold-back revere. The fabric was super-cheap from Walthamstow again but it’s the amount of time I spent which makes me grumpy. I might turn it into a skirt…

And so to the last outfit of the month…

The top for my last outfit of the month was originally a dress but, even though I’d made one previously for winter, this version just wasn’t right. The length wasn’t flattering and the sleeves, which had decorative darts, were too tight. After a bit of a refashion which removed most of the skirt, put short splits in the side seams at the hem and took the darts out of the sleeves making them a bit more floaty it was much more wearable. There were pockets in the side seams which I wanted to keep so this governed the length overall. I wore it with my trusty Ash jeans which I’ve absolutely loved since making them last autumn.

So to sum up, Me Made May encouraged me to really look in my wardrobe and get out some of the things which get worn less often, as well as the favourites. The weather has ranged from freezing cold to boiling hot and I realised that my summery dresses are rather lacking when it’s warm, and cooler plain bottom halves are needed to go with my many patterned tops. I know I’ve been prolific in the last 3 years or so compared to a long fallow period for years before that and that makes me very happy. Looking through the clothes I’ve worn during May the vast percentage are things that were made more than a year ago, a lot are more than 2 years old and some older than that. Even when I used to buy more clothes if there was a garment I really liked I kept it for a long time, I think probably because if I’d taken the time to choose it then I wanted good use from it-££ per wear and all that. The same is now true of my makes, I’ve invested my own time into making them so I want to enjoy wearing them (although it’s frustrating when they aren’t a success, but I’ll often refashion them if I can)

Did you join in with Me Made May and did it encourage you to to make more use of your self-made clothes?

Happy Sewing

Sue

Camber Set from Merchant & Mills

 

The Camber Set from Merchant & Mills has definitely become one of my go-to patterns for tops-I’ve made 4 now! I picked up the pattern early last year at a swap/meet up (it was the same meet up that I got the Maker’s Atelier Holiday top pattern too which has become another favourite, I’ve made 3 of those and blogged reviews of them here and here)

The first was a navy and white striped one in a linen-look viscose if I remember correctly- I bought it at least 20 years ago to make my Mum a dress but life intervened! What I’ve come to love about this pattern is the clean and stylish finish to the neckline. The front neck uses a strip of bias binding which is applied to the reverse and then brought over to the right side and top stitched.

the scissors necklace was from the V&A museum in London.

Next there’s a yoke at the back which is stitched in such a way that it neatens the back neck and encloses the shoulder seams all in one go. The instructions and diagrams are very clear but you do need to concentrate the first time because it seems a bit alien but trust me, it’s worth it. I had the bias on incorrectly initially because I assumed that it was turning in the usual way to the inside (it wouldn’t matter if you did it like that though, it’s just you wouldn’t then have the effect of the binding as decoration)

the stripes make yours eyes go a bit swizzy

I chose to contrast top-stitch some of the seams and the bust darts too for some visual interest.

I cut the top yoke on the bias simply because I had enough fabric to do so.

I cut a straight size 14 based on my measurements and it’s just right, roomy enough to be comfortable without being too baggy.  I would say that it’s an afternoon’s work if you make it exactly as the pattern.

The second one I made in more of a hurry to take to the second Sewing Weekender last August. This time I made it in some coral crepe-de-chine from my stash and made the bias and yoke in a contrasting butterfly crepe-de-chine which had been supplied by Adam Ross fabrics in the goody bags at the first Sewing Weekender! I mixed it up a bit by adding a small inverted box-pleat to the back.

The third version is a very straightforward plain ivory crepe (from Hitchin market I think) with no alterations. I love a patterned fabric and plain tops are not something I have loads of, I used to wear RTW T-shirts but I just don’t anymore so they need replacing with alternatives. I got cocky though and did the binding the wrong way round so it’s a bit narrower than it should be.

My most recent version of the Camber is a bit special IMHO. Recently I went with my friend Janet to Goldhawk Road to look for fabric for me to make her daughter a dress to wear to Janet’s son’s wedding (with me so far…?) Naturally I had a look at a few things myself but then in Misan I had some kind of out-of-body experience because I spent an ABSOLUTE BOMB on some Roberto Cavalli printed cotton lawn! I’m not even going to tell you how much it was, I’ve never paid that much per metre for any other fabric before, there was just something about the vibrancy of the colours and the prettiness of the design, plus Janet made me do it, she never even tried to stop me!! It’s a pity the photos don’t do it full justice though. [Misan also has 2 fabulous shops in Soho if you really want to blow the budget]

I bought 1m20 with a plan to make a Camber. With some really careful cutting (annoyingly there were two fairly wide unprinted white strips along each selvedge) I managed to get everything out so that the colours ran in ‘stripes’ around the body and on the sleeves too-this always pleases me immensely when I can achieve it-I was also able to add ruffles to the sleeves this time.

The although the fabric is 100% cotton it has a fair bit of inherent stretch which meant it had got a bit wonky from where I’d hung it on the washing line-a good steamy press largely sorted this out though. Basically I did everything the same as usual (except I really concentrated on the neck binding!) Instead of sink stitching the back yoke facing (that’s ‘stitch in the ditch’ in old money) I used one of the embroidery stitches that my Pfaff Quilt Ambition 2.0 offers. I chose one that’s fairly similar to the print on the cloth to complement it and used lemon yellow thread. I also added some small pleats to the back below the yoke.

I made the sleeves a fraction longer and added the ruffles, which I hemmed using the rolled hem finish on my overlocker. I’ve been trying to use this feature on suitable fabrics more often recently because it’s pretty and makes a change from a regular hem edge.

rolled hem finish

there are added small pleats in the back

I can’t wait to wear this, we’re off to Italy very soon and I’m going to wear it with white linen trousers (RTW ones sadly, I bought them when time ran out for making last summer) The photos don’t do the fabric and the colour justice at all but I think it’s going to be a summer favourite, it isn’t even my usual colour choice either!

This is the only M&M pattern I have, their aesthetic is very pared-back and utilitarian and not necessarily my thing but as you can see a variety of fabrics can make a simple style look very different-I don’t think I’m done with this pattern yet, I haven’t even made a dress version yet!

Happy sewing

Sue

a TR pattern cutting taster class

In my previous post I talked about my visit to the Fashion Technology Academy  for their first ‘Behind the Seams’ blogger event and in this one I’m talking about the other part of our visit which was a taster session of TR (Transformational Reconstruction) pattern cutting with the brilliant Claudette Joseph.

TR is a technique that has been developed by Shingo Sato, a Japanese designer who at one time worked for the late Azzedine Alaia. He creates fantastical garments that are both extraordinary and beautiful tromp l’oeil. When I was at college this technique didn’t really exist, the only way to create similar garments with such dramatic elements was to ‘model’ it on the stand in fabric and then create flat patterns from that. Shingo has developed a way to make these patterns now using a 2D method and he travels the world teaching it at very in-demand workshops.

Claudette Joseph is a 5 times Master and the leading UK exponent of the technique so have a 2 hour session from her was a real privilege.

Claudette showing us some of her samples

First of all she explained more about the technique and then she showed us some of her amazing samples, these are just a few of them and they are mind-blowing!

and a few more….

It doesn’t just have to be bodices either, these sleeves are typical too…

Claudette patiently showed us how to create a beautiful spiral-pleated effect on half a front bodice. 

concentrating….

Mine and Emily’s finished patterns

I enjoyed this part of our visit so much, it really got my creative juices flowing. It’s a technique that you have to concentrate fully on as there’s plenty of room for error, we all felt doubtful as we went along and were convinced it was all going wrong! In truth, you are only likely to see examples of TR on high end couture and bespoke garments, probably evening or wedding gowns in particular, but simplified versions of it would look beautiful on more affordable garments.

After I got home I cut my pattern in fabric and put it together to see how it might look.

This is what the pattern looks like when it’s opened out flat.

on the inside, this could be covered by a support fabric and would certainly be lined.

the sample doesn’t fit Doris because she isn’t the right size but you get the idea. The hole is probably a bit bigger than it should be so I must have made a mistake somewhere in the process, the folds should close up a bit more than that although a lining behind it would prevent the wearer from exposing herself!

I want to thank Claudette for her patience and for sharing her knowledge with us, I’d definitely like to do one of her 2 day workshops sometime later in the year. If you’re intrigued to try TR then you can check the website for details of future workshops.

Our day finally ended with us very generously being given 4m of fabric to take away, as well as a box of Moon threads from William Gee-thank you.

We all had a brilliant day and if you’re looking for somewhere to study the fashion industry this could be a great alternative to college or Uni.

Happy sewing

Sue

all photos are my own or sourced from Google.