My second Lamazi blog post

Much as I’m a big fan of sewing and wearing dresses, I do love separates too, especially tops. I think this version of the Amaya shirt by Made My Wardrobe may just have gone to the top of my favourites list! [Full disclosure, Lydia offered me my choice of one of her patterns as a PDF with no expectation of a review and I selected the Amaya with its gathered neckline, raglan sleeves and full floaty cuffs] I printed it off but then didn’t start it for a while until the ‘right’ fabric came along.

As a Lamazi Fabrics blogger we each volunteer for a number of slots throughout the year but Liana was short of a post for early August so I offered to do it. I thought the Amaya would be a good option as it’s not complex and I could probably sew it quite quickly to meet the deadline. When my eyes fell on the beautiful printed Broderie Anglaise I knew I had my perfect match! 

When the fabric arrived it was absolutely gorgeous, so soft and pliable. Broderie Anglaise can often be quite stiff and crisp, which may be what you want, but I’ve also found it to be a disguise for a cheaper quality cotton fabric with lots of dressing or starch in it so do be slightly wary of very cheap Broderie Anglaise. This version is a printed soft cotton lawn which is then embroidered, there are lots of eyelets so personally I’ll probably be wearing a plain-coloured RTW camisole underneath as no one needs to see my undies or midriff thank you! This specific fabric does not have an embroidered edge which some Broderie Anglaise does, and also be aware that the embroidered part of the fabric doesn’t run right up to the selvedge, this is normal with this type of fabric. On this particular fabric there’s a wider gap down one side than the other so you may find the useable part of the fabric isn’t as wide as you would think. In other words, don’t scrimp on the quantity of fabric when choosing Broderie Anglaise for a project because you could find yourself a bit short by accident.

I opted for a UK size 14 with no modifications according to my measurements but I think I will go down a size when I make another, the fabric you choose could make a significant difference to the finished look so a soft and floaty georgette or silk crepe de chine for example would look divine with plenty of volume but a firm linen, or a cotton poplin could give you the appearance of a ship in full sail! (that may, of course, be the look you’re after!) 

This fabric has a one-way design but I chose to turn the upper sleeve pattern piece to interlock better and make it more economical to cut out, I really don’t think it’s that obvious on the finished garment, always worth checking though! 

It’s pretty well impossible to see snipped notches or even triangles on this fabric so, in order to tell the front of the sleeve from the back, I marked the single and double notches with long thread tacks and this seemed to work well.

I used a French seam finish on the cuffs but found there wasn’t any particular advantage to doing this, for the rest of the construction I sewed regular seams and overlocked them together. 

The pattern calls for interfacing to be attached down the centre front seam to stabilise it but I chose not to do this as it would show through the eyelets, I simply neatened the edge of the self-facing with the overlocker. I had a rummage through lots of the miscellaneous trims and ribbons I’ve had from past projects and tried a few ideas out with them but in the end I only used a white cotton trim down the front and simple edging lace on the sleeves, I would have used this on the hem too but there wasn’t enough, more on that later. 

I added a triple zigzag stitch to embellish the sleeve ruffle seam too.

The neckline is gathered up into a bias-cut band but instead of cutting it on the bias I used a straight strip of the printed lawn from near the selvedge. I did this because a bias strip of such holey fabric wouldn’t have worked well at all, the one drawback of the tie being cut on the straight is that it doesn’t curve around the neckline quite so smoothly but it’s fine. The tie is topstitched close to the edge so, to match the sleeve, I used the triple zigzag stitch again. 

Finally I had to finish the hem, I could simply have turned up as per the instructions but I wanted some kind of pretty finish to echo the cuffs. As I didn’t have enough of the sleeve trimming, or any other edging lace which I felt worked alongside what I’d already used, I opted to try out one of the satin stitches which my Pfaff machine is capable of. 

I’d never tried this before so I did a couple of experimental tests with a few stitch designs that appealed to me, I used Vilene Stitch N Tear as a backing behind it to stabilise the fabric.

This seemed to be satisfactory so I sewed the whole hem by this method a few millimetres away from the edge. The Stitch N Tear is then carefully torn away to leave the actual embroidery and then finally, as accurately as possible, I snipped away the excess fabric to leave the pretty scalloped edge.

I’m very happy with this finish on the hem BUT it’s just possible that it might not be very durable in the wash, I’m half-expecting that it might start to come away in places. If this happens then I’ll have come up with another idea but for the moment it looks nice. 

I hope you’ve found my tips for working with Broderie Anglaise helpful, and things to look out for with it. It’s certainly a fabric that is having a ‘moment’ at the moment, it’s timeless and feminine and I’m looking forward to wearing my Amaya for a few years to come. 

Thank you as always to Lamazi for providing me with the fabric to be able to write this, and thank you to Lydia at Made My Wardrobe for generously giving me the pattern. 

Until next time,

Happy sewing

Sue

Isca dress by Marilla Walker

You’ll know if you’ve read my recent blog about pattern companies that I have a ‘mixed’ opinion shall we say of indie patterns. Some of them are great with interesting, original and well-drafted patterns, others are too simplistic, lacking in instructions and poorly drafted. I happen to think that Marilla’s patterns definitely fall into the first category.

I first met Marilla nearly 3 years ago when she organised, via Instagram, a meet up at Walthamstow market in London. It was my first sewing meet up and I was more than a little nervous because it was such an alien idea in principle-turning up in a part of London I’d never visited before to meet a bunch of people I’d never met before! It was like a sewing blind date but I needn’t have worried because everyone (of course) was lovely. I’m slightly embarrassed now that I think about it that it’s actually taken me this long to try one of Marilla’s patterns out, anyway, I’ve broken my duck and I want to tell you all about the Isca dress.

IMG_8017

You actually get two quite different dresses for the price of one with just a few similarities. I got mine as a PDF but you can also buy them as paper patterns which Marilla hand-prints and packs herself-what a lovely touch.

I was particularly intrigued by the draped wrap-over front so this was the one I printed off and happily the PDF all went together well. I’m getting better at them now I think because I found them quite tricky to start with. I don’t always print off the making instructions because they can be quite lengthy but I did print these in ‘booklet’ format so now I don’t need to lug the laptop out to the workroom. Although I didn’t encounter any problems Marilla does give lots of useful advice in the instruction booklet about all sorts of details so if this is all new to you either read them first on a screen or print off the booklet before you do anything else.

The pattern has been out for a little while now so there are quite a few to look at for fabric inspiration but I think this striped version by Takaka is particularly lovely, if you search with the hashtag ‘iscashirtdress’ on Instagram you’ll find more for both styles.

I’d found a lovely soft chambray at Hitchin market which was perfect because it had sufficient structure but with drapiness. You could also choose a washed linen, a printed medium-weight crepe could look nice too, nothing with a lot of stretch though because of the neck-band feature-it could be a nightmare of stretchiness to sew then.

Because my fabric was plain it’s a breeze to cut out, yay, no matching!

The sizing isn’t the traditional 10/12/14 etc, take your body measurements and compare them to the chart [in inches or centimetres] and then pick the size nearest your measurements. There’s also a chart of finished garment measurements which will help you decide the sort of final fit you want. I’m really happy with the fit personally, it’s a close fit to the bust and shoulders becoming looser over the waist. One really useful thing Marilla has included, although I personally don’t have to use it, is instructions for a full or small bust adjustment. This would be particularly helpful because the strange shapes of the front bodice pieces could make this a bit of a head-scratcher otherwise.

fullsizeoutput_281b
FBA and SBA instructions

Although I’m a very experienced dressmaker there is some very helpful guidance if this a more advanced construction to you. Marilla is very thorough about where to trim seams, which direction to press them and how to make lapped or French seams if you want to use them. I didn’t top stitch any of the seams but you could do this if you wanted faux lapped seams for example.

I found topstitching the narrow band at the neck the trickiest part to sew, it had a tendency to twist and I had to unpick and re-sew a couple of sections. It would be well worth tacking this whole area if you’re in any doubt at all, it might save you time and frustration in the long run.

I really like the unusual details in this dress such as the raglan shoulder seam at the back, and of course the draping front section with it’s narrow band.

IMG_8015
The raglan shoulder seam at the back. It has a small yoke piece on the inside too, to stabilise the shoulder which is another construction detail I like.

fullsizeoutput_2819

IMG_8013
The back has darts and a waist seam which give it a very smooth, fitted shape in contrast to the front.

The pattern pieces for the front may look slightly curious shapes initially but the reason will become clear when they are joined together. There is bust shaping which results in the dress sitting smoothly over the bust and armhole area. This is a very well drafted pattern and a lot of time, care and attention has gone into it. This is the sort of indie pattern worth investing in! A single designer has put so much into this pattern for it to be the best it can be and I really respect that.

fullsizeoutput_2818
I love the way it ties across to the side seam.

IMG_8010

fullsizeoutput_2817
Indoor Doris is a bit skinnier than me so the dress looks a bit droopy on her. Also, it’s crumpled because I took these photos after I’d worn it for the day!

When I finished the dress all it needed was a button-fortunately Marilla points out that unless you need the dress to open up for nursing then this can be purely decorative. I had a rummage and found a single beautiful vintage button so I used that, it would have been too big otherwise. IMG_8012I finished the dress in time to wear at the Sewing Weekender in Cambridge and it got lots of very nice compliments which is down to the pattern not me being model material!

IMG_8009
pockets on a slant!

IMG_7984
The other pocket is under the ‘flap’

IMG_7982
The hem dips at the front and isn’t intended to be level all the way round.

IMG_7981

I’ll definitely make another version of this style of Isca before too long but the shirt-dress version won’t be very far down my autumn sewing list either. Plain or patterned, this is a stylish and unusual dress, in many ways it sums up why I love to sew my own clothes than a more ‘conventional’ style pattern might. You’d be very hard-pushed to find a dress like this in the shops and even if you did it would almost certainly come with a designer price tag! It could be sleeveless for summer in a cotton, or a really soft babycord with a sweater under for cooler weather. There’s room to eat a big lunch as well!!

Marilla has created a number of other patterns, including the Roberts collection dungarees which have been incredibly popular so check out her website to see them all. She’s an amazingly crafty and creative woman and if you want to hear her talking more about her background you can listen to her on the Stitcher’s Brew podcast here. Oh, and she makes her own shoes too…and bras…and soap…in fact I don’t think there’s anything she wouldn’t have a go at making!!

So normal blog service has been resumed and I’ve returned to writing about dressmaking and not just getting uppity about sewing stuff that bothers me….although judging by all the responses I’ve had, much of it bothers you too.

Until next time,

Happy sewing,

Sue