Sewing with a sheer fabric

I’ve been meaning to write this post for months…six months to be exact, because that’s when I wore the dress at my dear friend Jenny’s wedding in April! I know it’s a spring/summer dress but I thought the way I’ve used the fabric might be of interest if you’re thinking of tackling a tricky fabric. I’ve used a couple of techniques which could be helpful.

I bought the fabric in Fancy Silks in Birmingham last autumn with the intention of making an Asymmetric Dress TPC2 by Trend Patterns for our cruise but eventually I made that in something else and, as Jenny had set the date for a spring wedding, I decided to use it for that event instead. It’s a challenging fabric which I would describe as being a satin-striped organza which has been overprinted with flowers. It’s exactly the same type of fabric that I used for my Dior-inspired evening gown three years ago. Part of the challenge is that it’s sheer so it needs to have some kind of lining, this could be a loose lining, or an alternative is to mount it onto another fabric first like I did and then make it up into the dress.

By an amazing piece of good fortune I had some very soft satin left from a pair of bridesmaid dresses I made about five years ago and it was a PERFECT match-unbelievable! Better still, I ordered some lining from Minerva based purely on the colour image on my screen and it was also a perfect match-it was obviously meant to be.

Clearly though I had to decide on a pattern, I didn’t want anything too flouncy and there was going to be some serious stripe-matching going on so it couldn’t be in a million pieces. I rummaged amongst my patterns and came upon Butterick 6244 by Lisette which must have been free with a magazine at some point. A couple of the lovely ladies who come to my class have made the coat with great success but, looking at reviews, I think the dress has been largely passed over. It appealed to me because the skirt was a very straightforward A-line and the bodice was Princess seams with a ‘Dior’ dart [this is where a short dart extends to the bust point from a Princess seam] There is also a small shoulder yoke at the front so that was perfect for rotating the stripe.

With the exception of the sleeves I had to cut all the pieces in three different fabrics, the satin and the lining I could cut together but the organza had to be cut separately to ensure the stripes matched properly. I altered the sleeve to make them longer and then I decided to add a pointed cuff to finish them off.

Once everything was cut out it’s a fairly slow process of ‘mounting’ each organza piece onto its satin backing. I began by laying each satin piece shiny side up flat on the table, placing the organza on top and pin the two together around the edges. Then, moving it as little as possible, I tacked each piece together within the seam allowances. This was another reason for keeping the number of pieces to a minimum because this process takes a fair amount of time. Once all the pieces have been mounted you simply construct the garment as normal. This has various advantages, it makes the see-through fabric opaque, it makes a flimsy fabric more stable and in this case it means the hem of the skirt will be invisible when sewn.

I used narrow piping on the neck edge and the waistband to give them some finesse, I had to cover the piping cord with both organza and lining because the cord showed through the organza alone. You can use a regular zip foot to sew on the piping, I have a specific piping foot for my Pfaff which is brilliant because it sews so close and holds it all firmly in position whilst sewing.

piping cord around the neckline.

So that’s pretty much it really because aside from matching lots of stripes it’s a normal dress. The beauty of the skirt meant that I could use self-made satin binding on the hem and then the hand-stitching won’t show on the right side, a truly invisible hem!

satin bias-binding on the hem, understitched and slip-hemmed in position.
the hem is then totally invisible on the outside.

The only sheer parts are the sleeves which I added pointy cuffs to and finished them off with pretty sparkly buttons. I mounted each cuff part onto plain organza before construction to give them more stability.

I cut the cuffs with the stripes running at right-angles to the sleeves.

I hope you might find some of these techniques helpful if you’re tackling trickier fabrics. Mounting one onto another is useful to add interest-you could have a contrast colour underneath lace for example, it gives opacity to flimsier fabrics, stability and support to fabrics like panne velvet and can enable seams and hems to ‘disappear’ with ease. I used french seams in the sleeves but otherwise they are all regular seams. I only overlocked those inside the skirt as there is a separate skirt lining, the bodice is fully lined and enclosed so there’s no need to overlock any of those seams. If you’re using chiffon or georgette which are more fluid fabrics than organza you you should back them or interface them with a similar weight of fabric, preferably plain in colour so as not to show through or deepen the colour of the top fabric too much. Plain chiffon or organza are frequently used in couture techniques for this purpose.

It turned out that April 22nd was a very warm day so maybe I should have dropped the neckline slightly but that’s British weather for you-somewhat unpredictable! It was a gorgeous, happy wedding…

did I mention it has pockets?

So as we head towards winter here in the UK I bring you a post featuring a summery dress! Anyway, you might find parts of it helpful.

Happy sewing

Sue

Tilly and the Buttons Nora top

I’m very excited to have been offered a copy of one of the new Tilly and the Buttons and I jumped at the chance to try Nora, a drop shoulder jersey top with several variations of sleeve, neckline and length. It’s just the sort of top I like to wear, often layered up in colder weather so I thought you might like to know what I think about the pattern.

IMG_8487
keeping the design under wraps before the launch.

For once I decided I would trace off the pattern first because I’ll probably want to use several of the variations but this time I wanted to start with the long sleeve, uneven hem version.

Initially I checked my measurements against the sizing chart, and then the very useful finished garment measurements chart too. It’s always helpful if patterns have this (‘big 4’ patterns usually have them printed directly on one of the major pattern pieces) because you can make a much better judgement of the size you want. Take a tape measure and hold it around your body using the finished garment measurements to see how you feel about the fit-too loose? too tight? I opted to go down a size from the one indicated by my body measurements because I felt the finished top would be plenty big enough.

I had some lovely loopback sweatshirting in my stash that I’d bought from GuthrieGhani at last year’s one and only Great British Sewing Bee Live in London. It had been destined for a top based on one I’d seen at the Burberry ‘Capes’ show at the beginning of 2017 but never quite got made. When I clapped eyes on the Nora I knew the Burberry top would rise again.

fullsizeoutput_29d4
I love the varied layers and stripes of this look.

In order to match the stripes, take your time laying up the fabric ready to cut. Ensure the stripes on the underneath layer are in line with the top layer by popping a few pins through both layers every so often. Next, I placed the front and back pieces onto matching stripes at the lower edges, double checking that the bottom of the armhole was also the same. I didn’t cut the sleeves out at this time, I waited until I had the front and back sewn together at the shoulders and the neck band attached before doing this. This way you can have your actual garment laying on the fabric next to where you’re intending to place the sleeve pattern, I cut each sleeve separately to make absolutely sure.

Tilly’s instructions and photos are generally very clear and helpful in my experience. I’m not sure if I did the neck band in quite the same way as the instructions but it worked and looks good. Different knits and jerseys have differing amounts of stretch so you may need to adjust the length of the band you use. I made mine shorter in the end as it wasn’t sitting flat at first, the band needed to be more stretched onto the neck edge to sit nice and flat.

IMG_8602
I’ll take that!

The beauty of the sleeve on the Nora is that it’s a ‘shirt sleeve head’ so it’s almost flat across the top. This means it’s very simple to sew on because there’s no tricky setting into an armhole to do, you sew it on flat and then join the underarm and side seams afterwards. Incidentally, I sewed most seams using the tricot stretch stitch (looks like lightening in the symbols if you’re looking for it on your machine) You could also use a zigzag that’s very flattened out by reducing the stitch width. Alternatively, you could sew most of Nora together using an overlocker but don’t forget the seam allowances are 1.5cms and an overlocker will be much narrower which could result in a bigger garment than planned if you don’t trim them down first.

Before I hemmed the sleeves I tried the top on and opted to bring the sleeve width at the cuffs in by a total of 6cms [only as far as the elbow though from where I graded back into the original seam] Although the cuffs were a bit too wide for my liking I loved the extended length which comes some way over your hands.

That just leaves the stepped hem. I used a twin needle to sew straight across the hems and a regular ballpoint needle to turn the side seams.

Before I started Nora I’d already decided that I’d wear a shirt under the stripy version because the front is actually a bit higher than I like so, when I make my next one, I’ll lengthen the front somewhat but still keep a ’step’. I’ve been wearing it with my favourite The Maker’s Atelier Holiday Shirt underneath and I love how it looks together. I bought some beautiful Liberty fleece-back sweatshirt fabric from Fabrics Galore at the recent Knitting & Stitching show which I’ll use to make the Nora with the high roll collar instead and the long cuffs will roll back to show the contrast colour, it’s going to be so cosy. I reckon you could make it in a drapey woven fabric too BUT  you’d have to make the neckline larger because you wouldn’t get your head through otherwise!!

fullsizeoutput_29acIMG_8591fullsizeoutput_29bb

IMG_8563
No make up selfie in Threadquarters! I really like all the hem interest going on.

Thank you Tilly for the chance to try out Nora, I’m definitely a fan and I think there will certainly be a few versions of her finding their way into my wardrobe over the autumn and winter…and then there will be short-sleeve versions when the spring arrives!

Until next time,

Happy sewing

Sue