The Frilled Hem Top from Trend Patterns

Trend are fashion-forward indie pattern company based in London and I’ve already used their Asymmetric Dress pattern twice (and reviewed it here) I even wore the first one for the Love Sewing magazine Sew Over 50 photo shoot too because I felt it was such a striking but wearable dress that it deserved to be seen in a national sewing publication!

I made this version in brocade for our cruise to celebrate our 30th wedding anniversary in March…
…and it has a pocket!

The next Trend pattern I’ve decided to tackle is the Frilled Hem Top TPC5 and it’s another goody as far as I’m concerned. As well as the ruffle detail it features some interesting diagonal seam lines (there’s no side seam) The degree of difficulty is described as moderate and I’d agree with that because although the techniques used aren’t difficult you need to keep your wits about you to ensure that you’re attaching the pieces to the right seams, it could be easy to lose sight of which way up they are because the usual ‘landmarks’ like armholes or necklines aren’t so obvious. There are photographs as well as written instructions, which are fairly clear, at the end of the day it’s a simple top and so long as the ruffle goes in first attached to the right pieces then adding the back yoke and sleeves is straightforward. I hadn’t got a suitable zip, I’d thought about using an exposed metal zip but the one I had in my stash was too chunky for the weight of the fabric so I opted for a simple button and hand sewn loop closure instead.

My fabric was a very thin cotton I’d picked up from a swap sometime ago-I couldn’t really say what it is as it isn’t soft like lawn, or sheer like voile, it’s slightly more crisp like poplin but less weighty. Whatever, it’s worked just fine for this and it didn’t cost me anything!

As I was making the top at this year’s Stitchroom Sewcial I was fortunate to be able to use the industrial rolled hem machine to finish the edge of the ruffle, it’s super-quick and neat and took me about 30 seconds to hem the whole piece instead of my usual pin-hem finish which would take at least half an hour!

As I didn’t have much fabric, plus I wanted to wear it as a summer top, I cut the sleeves down to short length. I was a little concerned that they looked like they may be a bit snug on my not-very-slim arms, the bicep measurement seemed to be ok but the crown looked narrow. I decided to go ahead and insert the sleeves and actually they are just fine as you can see from the photos. As there is no underarm seam to match the sleeve to it’s vital that the shoulder/sleeve head notches are marked or you’ll struggle to insert them properly. I’ve made a straight-from-the-packet size 14 again and the fit is spot on for me with no alterations, it’s a good fit across the shoulders and upper chest area and then flares out over the hips.

There are two points in the instructions which are useful and important to follow. The first is very simple, it tells you to ’sink stitch’ (that’s what it always was until ’stitch in the ditch’ became a thing) through the shoulder seams to hold the neck facings securely in position, this is both quicker and more effective than hand stitching them down I always think. The second point is that you can’t sew the whole hem up all in one go, you’ll need to sew the centre front section, stop, move the frill out of the way and then recommence the rest of the hem. If you don’t you’ll just sew over the frill which will look terrible.

You’ll need to sew the hem between the frills separately to the rest of the hem, moving the frill out of the way.
I finished off the neckline with a button and loop.
I love this detail where the frill, the back and the side all meet.

So that’s the Frilled Hem Top, it should probably take around half to a whole day to make, it took me longer because I was nattering at the Sewcial quite a lot, and then I made a super-quick Mandy Boat T-shirt using the industrial coverlock machines in between too.

This was my other Sewcial make, the Mandy Boat Tee which is a free pattern from Tessuti. I’ve made it in a gorgeous jersey form Lamazi Fabrics which I’ve learnt was recently discontinued.
If you’re interested in the jeans they are Megan Nielsen Ash which I tested nearly two years ago and I LOVE wearing.

The TPC5 takes a little under 2 metres of fabric, probably less if you’re making it sleeveless or short sleeves. The size range isn’t extensive, 6-16 UK sizes, and they aren’t the cheapest but I’ve been very happy with the two I have and I’ll definitely make some more variations of this particular pattern. You could create some really interesting looks by using contrasting fabrics or colours, or leave out the frill completely to show off the unusual seam lines?

Trend have a wide range of patterns now, which don’t necessarily appeal to everyone but I think they are well worth a look at because of their unusual styling and details. They may look scarily fashion-forward but if you want something which is less predictable and run-of-the-mill in a sea of ‘meh’ patterns then, in my unsolicited opinion, they are a good bet. They often have a flash discount offer too so keep your eyes peeled for them!

Until next time, Happy Sewing

Sue

Isca dress by Marilla Walker

You’ll know if you’ve read my recent blog about pattern companies that I have a ‘mixed’ opinion shall we say of indie patterns. Some of them are great with interesting, original and well-drafted patterns, others are too simplistic, lacking in instructions and poorly drafted. I happen to think that Marilla’s patterns definitely fall into the first category.

I first met Marilla nearly 3 years ago when she organised, via Instagram, a meet up at Walthamstow market in London. It was my first sewing meet up and I was more than a little nervous because it was such an alien idea in principle-turning up in a part of London I’d never visited before to meet a bunch of people I’d never met before! It was like a sewing blind date but I needn’t have worried because everyone (of course) was lovely. I’m slightly embarrassed now that I think about it that it’s actually taken me this long to try one of Marilla’s patterns out, anyway, I’ve broken my duck and I want to tell you all about the Isca dress.

IMG_8017

You actually get two quite different dresses for the price of one with just a few similarities. I got mine as a PDF but you can also buy them as paper patterns which Marilla hand-prints and packs herself-what a lovely touch.

I was particularly intrigued by the draped wrap-over front so this was the one I printed off and happily the PDF all went together well. I’m getting better at them now I think because I found them quite tricky to start with. I don’t always print off the making instructions because they can be quite lengthy but I did print these in ‘booklet’ format so now I don’t need to lug the laptop out to the workroom. Although I didn’t encounter any problems Marilla does give lots of useful advice in the instruction booklet about all sorts of details so if this is all new to you either read them first on a screen or print off the booklet before you do anything else.

The pattern has been out for a little while now so there are quite a few to look at for fabric inspiration but I think this striped version by Takaka is particularly lovely, if you search with the hashtag ‘iscashirtdress’ on Instagram you’ll find more for both styles.

I’d found a lovely soft chambray at Hitchin market which was perfect because it had sufficient structure but with drapiness. You could also choose a washed linen, a printed medium-weight crepe could look nice too, nothing with a lot of stretch though because of the neck-band feature-it could be a nightmare of stretchiness to sew then.

Because my fabric was plain it’s a breeze to cut out, yay, no matching!

The sizing isn’t the traditional 10/12/14 etc, take your body measurements and compare them to the chart [in inches or centimetres] and then pick the size nearest your measurements. There’s also a chart of finished garment measurements which will help you decide the sort of final fit you want. I’m really happy with the fit personally, it’s a close fit to the bust and shoulders becoming looser over the waist. One really useful thing Marilla has included, although I personally don’t have to use it, is instructions for a full or small bust adjustment. This would be particularly helpful because the strange shapes of the front bodice pieces could make this a bit of a head-scratcher otherwise.

fullsizeoutput_281b
FBA and SBA instructions

Although I’m a very experienced dressmaker there is some very helpful guidance if this a more advanced construction to you. Marilla is very thorough about where to trim seams, which direction to press them and how to make lapped or French seams if you want to use them. I didn’t top stitch any of the seams but you could do this if you wanted faux lapped seams for example.

I found topstitching the narrow band at the neck the trickiest part to sew, it had a tendency to twist and I had to unpick and re-sew a couple of sections. It would be well worth tacking this whole area if you’re in any doubt at all, it might save you time and frustration in the long run.

I really like the unusual details in this dress such as the raglan shoulder seam at the back, and of course the draping front section with it’s narrow band.

IMG_8015
The raglan shoulder seam at the back. It has a small yoke piece on the inside too, to stabilise the shoulder which is another construction detail I like.

fullsizeoutput_2819

IMG_8013
The back has darts and a waist seam which give it a very smooth, fitted shape in contrast to the front.

The pattern pieces for the front may look slightly curious shapes initially but the reason will become clear when they are joined together. There is bust shaping which results in the dress sitting smoothly over the bust and armhole area. This is a very well drafted pattern and a lot of time, care and attention has gone into it. This is the sort of indie pattern worth investing in! A single designer has put so much into this pattern for it to be the best it can be and I really respect that.

fullsizeoutput_2818
I love the way it ties across to the side seam.

IMG_8010

fullsizeoutput_2817
Indoor Doris is a bit skinnier than me so the dress looks a bit droopy on her. Also, it’s crumpled because I took these photos after I’d worn it for the day!

When I finished the dress all it needed was a button-fortunately Marilla points out that unless you need the dress to open up for nursing then this can be purely decorative. I had a rummage and found a single beautiful vintage button so I used that, it would have been too big otherwise. IMG_8012I finished the dress in time to wear at the Sewing Weekender in Cambridge and it got lots of very nice compliments which is down to the pattern not me being model material!

IMG_8009
pockets on a slant!

IMG_7984
The other pocket is under the ‘flap’

IMG_7982
The hem dips at the front and isn’t intended to be level all the way round.

IMG_7981

I’ll definitely make another version of this style of Isca before too long but the shirt-dress version won’t be very far down my autumn sewing list either. Plain or patterned, this is a stylish and unusual dress, in many ways it sums up why I love to sew my own clothes than a more ‘conventional’ style pattern might. You’d be very hard-pushed to find a dress like this in the shops and even if you did it would almost certainly come with a designer price tag! It could be sleeveless for summer in a cotton, or a really soft babycord with a sweater under for cooler weather. There’s room to eat a big lunch as well!!

Marilla has created a number of other patterns, including the Roberts collection dungarees which have been incredibly popular so check out her website to see them all. She’s an amazingly crafty and creative woman and if you want to hear her talking more about her background you can listen to her on the Stitcher’s Brew podcast here. Oh, and she makes her own shoes too…and bras…and soap…in fact I don’t think there’s anything she wouldn’t have a go at making!!

So normal blog service has been resumed and I’ve returned to writing about dressmaking and not just getting uppity about sewing stuff that bothers me….although judging by all the responses I’ve had, much of it bothers you too.

Until next time,

Happy sewing,

Sue

 

Imogen blouse from Sew Me Something

fullsizeoutput_1f90

This has become one of my favourite patterns this summer because I’ve made 3 now and I only bought it in March at the Spring Knitting and Stitching show! What I like about it is it’s beautiful simplicity with just a bit of detail on the neckline. Sew Me Something are based in Stratford Upon Avon and designer Jules sells lovely fabrics, teaches classes as well as producing a range of very wearable pattern designs. Whilst I haven’t been able to visit the shop, I’ve met Jules a number of times now at various shows in London. I admire her personal style and we have similarities in our work background, I used to work in high-end bridal and evening wear too…back in the day.

After I bought the pattern in March I made the first one in a slubby white poly/cotton (I think) origin unknown as a wearable toile. Rather than cut up the pattern I traced it off onto Swedish tracing paper which is stronger than regular tracing paper. I’m not always in the habit of tracing patterns off (especially if they’re tissue paper anyway) but, perhaps bizarrely, when it’s good quality paper I often do. I was short of fabric so the back had to have a seam in it but that wasn’t a problem. The instruction booklet is clear and well illustrated, the only possibly tricky part of the design is the notch neck front but following it slowly and methodically it works a treat. I’ve photographed my most recent version which hopefully makes it clear if you’re reading this as a bit of help.fullsizeoutput_1f97fullsizeoutput_1f98fullsizeoutput_1f9afullsizeoutput_1f9bfullsizeoutput_1f9c

IMG_3992
sorry this one’s a bit blurry 😦

Once you have the placket pieces overlapping I stitch through all the layers at the bottom to secure them, then I zigzag the edge to neaten them (easier than trying to put such a tiny piece underneath the overlocker.IMG_3993

Finally ‘stitch in the ditch’ carefully from the front to hold the placket in place.IMG_3995

IMG_3996
Oops, got that bit caught! annoying but easily rectified.

With my first plain white version I followed the balance marks for the gathering but actually I felt the gathers looked too spread out so when I made my second version (and now the third!) I’ve condensed the gathering into smaller areas on the front, shoulders and centre back which I’m happier with.

Another thing I like is the instruction to sew hems separately before joining the side seams. This sounds a small thing but because the hem is dipped and rises at the side seams it means you get a much neater finish at the side seams-genius!

IMG_3998
I sewed the sides with French seams so it super-neat inside. I’ve used contrast yellow on the hem too.

fullsizeoutput_1f1f
I’ve noticed I always wear my gorgeous ‘bee’ necklace from Alex Monroe with Imogen because the notch shows it off so well. I’m wearing one of my Zierstoff Gina skirts and you can read the blog about those here.

IMG_3708
Autumn leaves at Anglesey Abbey, Cambridgeshire.

My second version was made using the gorgeous coral lightweight linen I bought from Jules with the pattern in March.

 

I’ve made all my versions with the longer length sleeve with loose elasticated cuff, you could obviously make them tighter but I prefer them like this.

I wore the coral top to the Sewing Weekender in August and it got plenty of compliments (and obviously I told everyone what the pattern was, although several people recognised it straight away)

fullsizeoutput_1f2f
Hard at work (photo credit Charlotte Powell at English Girl at Home)

The jolly fabric for my newest version came from the swap hosted by The Foldline at the recent Great British Sewing Bee Live, it’s a sharp contrast to the plain fabric of the first two that’s for sure! Thanks Kate, hope you like what I’ve done with it…

IMG_3672
I look a bit crumpled after all that shopping and chatting at GBSB Live…I’ve made it to the cover of Love Sewing….well, nearly 😉

What I’ve loved about this top is how comfortable it’s been in warm weather, and the details are pretty but understated-a trademark of Sew Me Something patterns to be honest. I know I’ve made 3 but I reckon there’ll be more, it would be gorgeous in a silk chiffon or crepe de Chine, or fine wool challis for example. You could add a trim to the neck, in the seam perhaps or beadwork perhaps? This third version I’ve cut a little longer than the previous two simply because I had plenty of fabric. I’m going to layer it up in the winter with a long-sleeved tee underneath. Another thing I like about this brand is that the sizing is for real women and goes right up to a 22-not all independent companies have this range and I’m not sure why.  and that seems a shame.

fullsizeoutput_1f91
I lengthened this version by 4cms simply because I had plenty of fabric. If your fabric is wide enough to fold the selvedges to the centre it’s an economic way of cutting out, it also gives you the ability to line up elements of the print so they run pleasingly around the body (always a dead giveaway of cheap RTW clothes)

fullsizeoutput_1f9d
I finished the inside neckline this time with a bit of soothing slip-hemming.

IMG_4020
Number 3 finished!

 

I want to stress that I bought my own copy of the pattern and the fabric so any opinions expressed are entirely my own. I’m trying out a few trouser patterns lately (more on that to follow in a few weeks) so I’m tempted to try one of Sew Me Something’s trouser patterns in the future but there’s a long Autumn sewing list to work through before I buy anything more….famous last words!

Happy sewing

Sue