A few of your favourite Sew Over 50 trouser patterns

Recently on the @SewOver50 account a follower asked if we could help her with any suggestions for trousers/pants that featured a side zip and/or a flat front and, as we’ve come to expect, the hive mind flew into action. 

Speaking personally, my primary reason for wanting a flat front is that it falls more smoothly over my not-so-flat tum [Years of fashion magazine input tells me that a flat tum is highly desirable, it’s what every woman of every age should want to achieve and anything less than perfect and a bit wobbly should be kept out of sight…Complete and total nonsense obviously but it’s very hard to undo so many years of conditioning] So, whilst I know it really shouldn’t matter it somehow still does matter to many of us and, because of that, we still continue to search for those perfect and often elusive trousers which give us just the thing we’re after, whatever it is. Sometimes we choose a smooth front because we want the top or blouse that’s worn with it to be the highlight and features like fly openings or pleats can be a bit bulky and change the silhouette we desire, but it isn’t always about hiding ‘figure problems’. One follower pointed out that as a person with physical limitations the trouser choices she made had to be based upon practical reasons which made her life more comfortable and straightforward and could not be influenced by mere vanity, a luxury not everyone have.

Much like the SewOver50 go-to T-shirt list I will simply give you links to the many and various patterns which followers have suggested. I’ll begin with the ones I have sewn myself so they are my personal opinions and then follow with the rest. Most of these patterns either have a side or back zip, a few have an elasticated back, some are pull-on and the majority have a flat or flattish front. Where I’ve mentioned sizing it will be UK sizes unless I state otherwise. 

Let us begin…

Eve trousers by Merchant and Mills are as basic and classic a shape as it’s possible to have. They have a side zip and darts front and back with a fixed waistband. They have a tapered, slightly cropped leg shape without being close-fitting and a turn-up hem option. I’ve made 3 pairs (so far) in very different fabrics and they fill a gap I had in my wardrobe for just such a garment. There are two patch pockets on the back but I think this understated style lends itself to many hacking opportunities. Sizes available are UK 6-18 or 20-28 paper and PDF

Eve trousers made in soft green babycord

Sidewinder Pants by The Sewing Revival The USP of these flat front and elasticated back trousers is the unusual side seam which winds from the waist starting slightly in front of the hip bone, down the side of the leg and finishing behind your ankle bone. There are pockets set into the seam and the Sidewinders can be hemmed with or without a turn-up or with a deep elasticated cuff. I found them very straightforward to sew-I’ve made 3 pairs of these too in a variety of fabrics including one pair in a really nice heavy jersey with the elasticated cuff. I wrote a review of them a while ago which you can read here. It’s a PDF only and sizes available fall into 4 brackets UK 6-12 10-16 14-20 and 18-24

My Sidewinders in jersey

Sidewinders in grey suiting with pink topstitching to highlight the seam detail.

Palazzo Pants by Simple Sew This style has darts front and back with a fixed waistband and a back invisible zipper which runs up into the waistband. It gives a smooth close fit around the body which then widens out to very voluminous legs. There are pockets in the side seams if you want them but could easily be left out. I think they are a lovely shape, and I reviewed them here when I was a Simple Sew blogger, but if I made them again I would sew a regular overlapping waistband which closed with a button and buttonhole or a hook and bar because they are a bit tricky to do up. UK sizes 8-20 paper and PDF

Simple Sew Palazzo pants

Portobello trousers by Nina Lee These trousers have a lovely Katharine Hepburn vibe, they aren’t technically flat-fronted because they have deep pleats but they zip up at the back, which has darts, so there’s no extra bulk in the front as a result. They sit on the natural waist with a fixed waistband, have wide straight legs and there are pockets in the side seams. I made a pair in a slightly-too-springy fabric but they look OK and are very comfortable. I reviewed them on the Minerva website, a better fabric choice would have been something like a nice heavy crepe or twill, anything with a bit of drape would look great. I believe Nina Lee patterns are only available as PDFs now, sizes are in two brackets UK6-20 and 16-28

Portobello trousers by Nina Lee

6351 by New Look This is a pattern for separates and I’ve used the trousers a few times now. They have a drawstring (and elasticated) waistband, side seam pockets and the legs fall wide and straight. If these fit well on the hips then there isn’t too much bulk from the gathers at the waist-I’ve made them in linen and they are gorgeous in warm weather. I shortened another pair I’d made but didn’t wear so much and they have had so much more use as mid-calf cropped pants. Paper pattern only UK 10-22 (I think) 

New Look 6351 worn with The Maker’s Atelier Holiday shirt in Assisi, Italy

That’s all the patterns I’ve sewn myself so now it’s over to you, in no particular order…

Ultimate trousers by Sew Over It these slim-fitting trousers have a side zip and a facing rather than a waistband. They have been around since the very earliest days of Sew Over It and I’ve heard reviews which swing wildly in either direction. Some people swear by them and others say they can’t get a satisfactory fit. My advice would be to read a few reviews before making your decision. They only seem to be available as a PDF now UK sizes 6-20

Bev in her Ultimate trousers

Pietra pants by Closet Core these are a more recent release from Closet Core as part of their ‘Rome’ collection and they already have a legion of fans. There’s no zip, the back is gently elasticated with wide elastic, the front is smooth because of a grown-on slightly-raised waistband, there are quarter seams down the front with pockets plus there are three leg shape options-tapered, wide leg and shorts. That number of variations alone must make them excellent value for money! On top of that they come as a paper pattern US size 0-20 only and PDF in sizes US 0-20 or 14-32

Jenny overalls and trousers by Closet Core these are a wide-legged dungaree pattern with a number of options including trousers. They have a fitted waistband and darts for a close fit. Available as both paper and PDF in US 0-20 only. Closet Core have a reputation for comprehensive tutorials on their website so take a look if you need any help.

Chiara trousers by Tessuti these are a wide-leg slightly cropped length trouser with darts for a close fit around the hips and waist and a side zip. The waist is finished with a stitched-down facing. Available as a PDF sizes AUS 6-16 only.

Crew trouser by Chalk and Notch These trousers/shorts do have a side zip although they aren’t flat fronted, they are high-waisted with pleats and a tie feature. PDF only sizes US 0-30 

Mountain View pull-on pants by Itch to Stitch Initially I thought these didn’t fit the brief because they appear to have a front zip but it’s a faux one so we’ll let them past. A jeans-style legging made in fabrics with stretch this is a PDF only pattern in two size brackets (you get both with purchase) US 0-20 and 22-40

Eureka pants by Fit For Art Patterns I wasn’t familiar with this brand but these trousers for woven fabrics have multiple options for the waistband and leg shape which should help you to achieve an excellent fit. Paper or PDF sizes XXS-3XL (whatever that means)

Calder Pants by Cashmerette are another good option. Wide legged in three lengths including shorts, smooth front and elasticated back to ensure an excellent fit. It comes in paper or PDF formats, sizes US 12-32 Cashmerette are renowned for their comprehensive fitting instructions which could be very useful.

Willow Trousers by Style Arc classic slim pants similar to Eve mentioned at the top. The Willow have a split hem detail and side zip. Paper patterns or PDF are both available in single sizes AUS 4-30 or multiple AUS 4-16 18-30 

Bob pants by Style Arc a tapered, ‘balloon’ shaped leg with an elasticated waistband and side seam pockets, these trousers have become a stylish choice teamed with loose shirts and casual tops for a modern look. Sizing as with the Willow above. If you like these you might also like the Ethel pants by Style Arc.

Flint trousers by Megan Nielsen a wide leg pant or shorts without a zip at all, instead they have a crossover closure at the side which is incorporated into the pocket. Printed comes in AUS sizes 0-20 or PDF 0-20 or 14-30

Marilyn Jeans by Charm patterns These are a Fifties-inspired close-fitting jeans pattern but with a side zip, think Capri pants. PDF only at present but available in two size brackets US2-20 or 18-34

Clover pants by Seamwork another pair of slim-fitting pants designed for wovens with stretch. Side zip and ankle or mid-calf length, they can also have small inseam pockets at the waistband PDF only US 0-18

Duet trousers by Love Notions these trousers have an invisible side zip, two front hip pockets, back darts and two leg shapes-straight or tapered. They are suitable for both wovens and stretch fabrics. PDF only in sizes US 2-26

Miller trousers by Paper Theory These don’t have a zip, instead they have an elasticated waist with a tie option. There are pleats in the front, deep side pockets and long darts in the back to improve the fit in this area. Paper pattern or PDF UK 6-28 

Judith wearing her brand new Millers

Free Range slacks by Sew House Seven These are another pair of slightly gathered elasticated trousers but the side seams on these have been divided and shifted to form a panel at the sides instead. They come with a tapered or wide leg option and look great in linen or similar fabric types. It’s a PDF pattern with two size brackets included AUS 00-20 and 18-34 

Kate @stitchmeayear wearing her Free Range slacks

So there we are, this isn’t in any way an exhaustive list of course, you may think there are glaring omissions, and the emphasis is strongly on Indie patterns rather than the mainstream pattern companies. These are the patterns which were suggested by the followers of Sew Over 50 so if you have your own favourites then feel free to let me know in the comments, a few of the patterns suggested were out of print so I haven’t mentioned them here. Don’t forget to tag #SewOver50 and #So50Trousers when you post on Instagram either, it’s such an amazing source of inspiration and ideas for others.

Until next time, happy sewing

Sue

A return to blogging with a Kingfisher top from The Sewing Revival

There’s been quite a lull in my sewing and blogging of late due to a distinct lack of motivation and generally feeling meh about everything. I don’t know about you but I’m utterly cheesed off with the persistence of the ‘Rona and, whilst I really try to find the positives as much as I can, there comes a time when I’m all out of good thoughts.

Anyhoo, I’ve finally managed to get my act together and to cut out and sew something which is worth blogging about!

You’ll know I use The Sewing Revival patterns a lot, and especially because they are SewOver50-friendly in their representation. Janine kindly offered me a copy of the new and improved Kingfisher top recently so here are my thoughts on it. The original version was one of the first in the Sewing Revival collection and it now features extra variations including 3 sleeve lengths and additional ruffles and frills to gussy it up.

Initially I’d settled on using a length of fabric I bought recently but in the end, whilst searching-sorry-shopping, my stash I came across a length of batik-printed lightweight cotton which had originally been a dress. I bought it as a remnant which was in two different-sized pieces pieces so I joined them right across the weft to make it useable. From that I turned it into a simple ‘pillowcase’ dress with a gathered drawstring top and hemmed at the bottom. Needless to say, this being England, I didn’t get a massive amount of wear from it because our climate is so unreliable. Sadly I don’t seem to have a photo of it now so you’ll just have to believe me.

The Kingfisher has raglan sleeves which are always so nice to make because they are simple and quick to construct. One of The Sewing Revival’s trademarks is to mix a stretch neck band, cuffs or hem with a woven fabric and this top features a ribbed, rounded neck band. But first I had to get all the pieces out of a length of fabric with a join across it at about 50cms in, plus a tear at right angles to the selvedge in another place AND a small hole just near that! I calculated that I could get a pair of 3/4 length sleeves but one would have to have the seam running horizontally across it. Another new feature of the Kingfisher is additional small ruffles to add so, instead of placing them vertically on the sleeves, I opted to cover the seam with horizontal ruffles, that way way both sleeves would look the same. After a bit of pattern Tetris I got everything I needed out including the ruffles. I started by making the sleeves.

Inside the sleeve with the exisiting join running horizontally

Because of the limitations of the fabric the ruffles were only 5cms wide so, in order to lose as little of their width as possible, I finished each edge with a rolled-hem finish on the overlocker. Check your instruction booklet because I’m sure many models will offer this feature, it will involve a few simple adjustments to the settings to achieve. A rolled hem is a quick and attractive way of neatening fine or lightweight fabrics when you can’t afford to lose too much off the edges.

Each ruffle was cut twice as long as the width of the sleeve because the fabric is quite fine and will gather up well. If you are limited for fabric (mine were cut on the straight grain) or if your fabric is quite stiff or thick, then 1.5x the width will be fine. I sewed a rolled hem on both edges of the sleeve ruffles and then ran two rows of a long gathering stitch along the centre line. Make sure the gathers are evenly distributed before sewing the ruffle down, I used a zigzag stitch to sew the ruffle in place.

I created a cuff to finish the sleeve ends by cutting two pieces of fabric from along the selvedge and sewing them on. My original plan was to create an elasticated cuff using a casing but then inspiration struck(!) and I sewed three rows of shirring instead.

Shirring works best on lighter-weight fabrics such as soft cotton-types [lawn, batiste, voile, Swiss Dot, pique, poplin if it isn’t too stiff] also most viscose/rayons, many silks, and fine woollens such as challis. This isn’t a definitive list by any means, basically nothing too thick, or stiff or overly ‘bouncy’. As with anything you’re unsure about I’d strongly suggest sewing a few samples first to see how it goes.

To begin (and these are very much my own thoughts on shirring, you will find many others which might vary to these-trial and error before you start is the best plan of action) you ideally need a bare minimum of 1.5x the eventual finished measurement but as a rule of thumb I would say at least 2 or 2.5x your finished measurement, especially if the fabric is very fine. I also wrote advice on shirring the back of a sundress in a previous blog post which you can still read here.

Gently wind shirring elastic onto your bobbin by hand, do not stretch it as you wind, you will use regular sewing thread on the top as normal. Set your stitch length as long as possible and, sewing on the right side of the work, make sure you backstitch at the start to secure your threads then sew your first row of stitching. Do not backstitch at the end of the row, carefully remove the sewing by gently pulling the elastic out so that there’s enough to tie off the ends eventually. Repeat by sewing parallel to the first row of stitch as many times as you require, I’ve just done three for the cuff. You could draw on the lines using a marker pen or chalk if it will help, I just keep the edge of the foot in line with the previous row of stitching. The work will gradually start to pucker up as you increase the rows. The photo above shows you what it looks like on the reverse.

This is the right side of the cuff, wherever possible work with the fabric flat and then joint it in a seam or to the next piece it’s connected with. It won’t be gathered up enough to start with so hover your hot iron with plenty of steam over the area and it will pucker up a lot more. When it’s gathered as much as it’s going to tie off or backstitch the threads/elastic to secure.

In the photo above, the top cuff is before the steam was applied and the lower cuff is afterwards, you should be able to see that the stitching is a fair bit tighter-looking.

Next I added small ruffles to the front raglan seams, also neatened with the rolled hem finish just on one edge. The rest of the Kingfisher was very straightforward, the ribbing band went on neatly and gives the neckline a nice finish. You could also use bias binding or make facings if you don’t want to deal with stretch but I like it like this.

Close-up of the finished neckline, I think I bought the navy ribbing from Lamazi Fabrics a little while ago.

Sleeve ruffle

I cut this top in a UK10 so it’s a closer fit than some tops I’ve generally made but I’m really happy with the fit, there’s still ample room for comfort and movement. From a fabric that was languishing in a box I’ve concocted a casual top I can wear in warmer or cooler weather.

Thank you to Janine for providing me with the pattern, I hope my review will be helpful, for a such a simple shape there are so many possibilities with it. If you haven’t tried any Sewing Revival patterns I’d definitely suggest you pop over there and take a look, and if you choose to follow any link I’ve created in this post or previous TSR ones, and you then make a purchase, I will receive a modest fee from it. You can also read my previous reviews for the Sidewinder pants, the Heron dress plus a hack, the Bellbird top and the Fantail top and it’s follow-up. If you want any more inspiration use the hashtag #KingfisherTop on Instagram or Facebook. I’ve got plans for a deep-cuff version later in the year, just so long as I don’t have another creative slump…!

Welcome back and thanks for reading this far, I’ll try not to leave it so long next time!

Until then, keep sewing!

Sue

Fantail Top from The Sewing Revival

Janine at The Sewing Revival, the pattern company based in New Zealand, is gradually creating a growing collection of stylish patterns and there is something very appealing in their deceptive simplicity I think. I’ve made a few versions of several of them now, including the Sidewinder pants, the Bellbird top and the Heron dress.

When Janine kindly offered me my choice of the range to choose from I picked one of the more recent releases, the Fantail top. At first glance it appears to be a simple raglan-sleeved top but along with the high/low hemline and elasticated front hem it offers variations of scooped, ribbing or V neck, elasticated or ribbing cuffs, and the back hem can be finished with ribbing too.

I had a rummage in my stash for some suitable fabric, ideally something with a bit of drape works best so soft viscose, crepe, georgette or chiffon if you fancy a challenge, cotton lawn, wool challis or fine linen would all work very well. Light- or medium- weight jersey will make it into a very chic sweater. I’ve no idea where my piece of navy fabric came from, probably I was given it by an elderly lady because it had a little ticket pinned to one corner saying it was 1 1/2 yards x 54” wide and cost 90p! It certainly smelt a little bit musty so the first thing I did was give it a quick hand-wash, it turns out that the colour ran quite a bit and I was left with blue hands for several hours afterwards!!

The patterns are sold in size bands which each contain 4 sizes (there is some overlap between the brackets) and each band is layered which gives you the option to print only the sizes you want so I printed UK 10 and 12 because, having lost some weight recently, I wasn’t sure which size would be best. In the end I cut a UK12 and it looks fine I think, it’s a roomy style so I could possibly go down a size but as I’m one of life’s ‘fluctuaters’ where weight is concerned maybe I won’t.

I like the instructions on Sewing Revival patterns because they are well explained and illustrated with photographs. If you’re an experienced sewer like me then you won’t necessarily need to follow them closely all the time but I do keep half an eye on them so that I don’t miss a step or construct in the wrong order which might have repercussions later on.

I made the scoop-neck version with elasticated cuffs which is probably the most straightforward variant, the round neck is just the right amount in my view, not too wide, not too deep. Raglan sleeves are super-quick to construct, I usually sew the neck facing on after the shoulder seams and before sewing the under arm seams.

The front and back hems are very different lengths and finished differently so don’t rush through these elements. I ignored the suggested bias-binding finish on the back hem and used one of my favourite techniques of a pin-hem instead ( I wrote instructions for this last year in this blog post on hems )

The USP of this top is the deep partially-elasticated front hem. It looks great but it’s really not difficult to achieve. There are suggested lengths to cut your elastic for each size although you could use a shorter piece over the same length if you want to pull the front in a bit more. Or you could also use a narrower elastic but the pattern is cut for wide width like this so you may have to make an alteration to the hem depth accordingly for the channel to work.

This is the side seam where the two levels come together, make sure the back hem is fully enclosed within the front so there is a nice smooth line from front to back.

The finished top on the stand.

I sewed the deep elastic cuff version, there’s a subtle amount of gathering.

As I said, this is a simple top with eye-catching details, it’s probably a half-day project if you’re got everything you need when you start.

The sun came out so we headed out to the garden for photos. I’m wearing one of the pairs of Sidewinder pants I made in 2019, they are a bit baggy now.

There’s a nice dip to the hem at the back.

I’ve already got some fabric lined up for another Fantail hopefully very soon, a nice piece of soft viscose from Sew Me Something and ribbing given to me by my friend Kate which by sheer good fortune coordinates perfectly! There’s lots of possible variety with the Fantail, short sleeves is another for example. Incidentally, there is also a slightly different sleeveless version of the Fantail available too.

Until next time, Happy sewing

Sue

Sidewinder pants by The Sewing Revival

The Sidewinder pants are my third make using a pattern from The Sewing Revival following on from several versions of their Heron dress and Bellbird top. I’ve already written reviews of them which you can read about here and here, plus I made a new version of the Bellbird at the recent Sewing Weekender in Cambridge, organised by The Fold Line.

The Sidewinders are a very simple pull-on trouser pattern with a tapered leg but their USP is the diagonal side seam which gives them such an interesting ‘twist’. They are flat-fronted with an elasticated back waist and of course there are pockets in the seams too. There are variations at the hem too as you can choose plain full-length, 7/8ths with turn-ups like mine or use wide elastic to gather the hem into cuffs. As you can see from the artwork they could be very casual or dressed up with heels, fabrics with a bit of body but some drape and softness are suggested. Like the other Sewing Revival patterns these are PDFs so you can buy, download and print your pattern any time, or have them printed for you on A0.

As I’ve come to expect with SR patterns the instructions and illustrations are very clear and personally I’ve always found their sizing very good too. I cut the large based on my measurements although I did decide to shorten the leg length very slightly as I didn’t want them ‘pooling’ around my ankles too much, the idea is that they sit above the ankle bone. The instructions tell you what length of elastic to cut for the back waist which you can then adjust to suit.

For the first pair I used some Royal blue crepe fabric which was leftover from the Trend Asymmetric dress I made last year. If you’re using a plain fabric these trousers are surprisingly economical to cut and if you’re short of fabric you could cut the pocket bags and waist band facings from other fabrics too. You could have fun with stripes or checks to give them a bit of a Vivienne Westwood vibe but you’d need more fabric for that. What about using ribbon or piping down the side seam for emphasis?

Construction is very quick, I’d say that this could be a half-day project if you aren’t getting fancy with pattern-matching. I really like the way that the waistband is a facing because when it folds over the top it secures the pocket bags in place, you only need to neaten the lower edges of them. The elastic gets slotted through the back channel which extends slightly around to the front beyond the ‘normal’ side seam position. Once this is stitched in place you sew down the facing at the front. This line of stitching isn’t near the edge, it’s approximately 3.5-4cms away depending on the width of your elastic so use a guide of some kind to keep it parallel, I always use the quilting guide which comes with my machine or you could use Washi tape or similar stuck onto the bed (I’m not keen on this personally as I wouldn’t any sticky residue near my fabrics but I know others use this method)

These are the second pair which I made at the Weekender and that is why some of the overlocking is different colours.

As I said earlier I’ve made both versions with a small turn-up so once I’ve turned them up I stitched through seam lines of the inner and outer leg seams to hold the turn-up securely in position.

You’ll notice from the grey version that I contrast top-stitched in pink either side of the outer leg seams to give some emphasis to the diagonal seam, I like how it goes ‘off’ at the hem.

The blue pair are sooo comfortable because the crepe fabric has quite a bit of natural give, and the back elastic gives a nice snug fit without being too tight. My blouse here is a longtime favourite, the Imogen from Sew Me Something

There was enough fabric to make a belt which ended up being massively long so it goes round twice into a big bow!

And these are the grey pair which I teamed with the second garment I started (but didn’t finish!) at the Weekender which is another Sewing Revival Bellbird made in a very lightweight woven check cotton which I picked up on a swap table somewhere last year. The label was given to us by lovely Harriet of Sew me Sunshine which is a really nice reminder of what I made and where!

Janine at The Sewing Revival generously provided me with the pattern for the Sidewinders and I’ve been more than happy to write a review because I love these trousers! I’m planning to make more for the winter and I’ll definitely give a gathered ankle pair a try too.

After a few weeks of sewing for others, writing (and then completely rewriting the Sew Over 50 birthday blog post because I lost ALL 4000+ words!!!!) and being away from home it’s lovely to get back to a bit of sewing for myself and sharing my thoughts with you. I’m so happy that I discovered The Sewing Revival as a result of our first Sew Over 50 challenge at the beginning of the year, did you find any new patterns brands as a result too, that was certainly our hope.

Until next time,

Happy Sewing

Sue