Sewing the M&M Ellsworth shirt for Backstitch

The Backstitch store at Burwash Manor near Cambridge.

As one of the new team of Backstitch Ambassadors I relished the chance to go along to the gorgeous shop at Burwash Manor to browse their fabrics and patterns. It’s about 40 minutes from where I live and I love to go there whenever I get an opportunity, I’ve previously included it in this round-up of Hertfordshire based fabric shops. To be completely honest, I already had an idea that I would like to make the newish Merchant and Mills Ellsworth shirt but I had an open mind about fabric choice. In my head I was looking for a lightweight linen-type but as soon as my eyes alighted on the checked double gauze I was all in for that! It was folded on the bolt with the large check visible on the outside but when I discovered the reverse was small checks my mind was blown and I knew I could mix the two sides to create a unique garment. There are currently 4 colours available but I settled on the pretty shell pink variation. I took 2 metres as per the pattern instructions but after cutting it out (and as I’ve found before with M&M patterns) I had almost 50cms left over, even allowing for pattern matching. It’s very annoying when this happens and I’ve made a note for next time. I cut a straight UK 12 with no mods.

I loved the elliptical pearly buttons but there were only two of the pink shade left so I made do with two pink and four ivory. Backstitch have quite a wide selection of buttons, trims, and ribbons plus lots of other haberdashery and sewing equipment including Brother sewing machines.

The Ellsworth is quite typical of M&M’s aesthetic, it is a very wide and loose fit shirt with a stepped hem, a collar and button placket and cropped, cuffed sleeves. It will lend itself towards fabrics which have an element of fluidity and drape such as soft linen or cotton-types, light woollens, crepe, chambray or babycord. Some light- or medium-weight jerseys would probably be okay but I wouldn’t recommend ones with a lot of stretch. 

Another reason for choosing this shirt (apart from the fact I liked it anyway) is because I had seen a few makers on Instagram were having trouble interpreting the instructions for the placket. I hope what follows will give you a bit more information and guidance. 

Away we go…

Definitely give your fabric a wash first, its light loose weave will shrink a little (it will be very crinkly when it comes out of the machine but don’t panic, it will press flat again. You may ultimately prefer the crinkles but they will be hard to work with during the making process so press as you go for now)

If you are a person with no patience when it comes to laying up your fabric, or time is tight, then this may not be the fabric choice for you because it does need some careful laying up and folding to get the checks straight and matching [or you could cut every piece on the flat to save on the head scratching] There were a couple of places where, in spite of my best efforts I was bit off but I won’t tell you where they were and you might not notice anyway! It does have the advantage of the large check being 3cms square and the reverse is 1cm squares so a 1cm or 1.5cm seam allowance shouldn’t be a problem to follow.

The problematic placket is made first so here’s my interpretation of the instructions for you. Begin by interfacing all pieces as instructed (although I interfaced the whole placket rather than half as the fabric is quite fine and a bit unstable)

Mark the bottom of where the placket will be sewn on with tailor’s tacks or a soluble marker pen then stay stitch just within the seam allowance, at 1.4cm (14mm) to reinforce the area. For visual reference, the large squares are my right side, the small squares are the wrong side of the fabric.

Cut down the centre front line and carefully snip diagonally into the corners.

Fold and press each of the two placket pieces down the centre and then press in the seam allowance on one edge only. Trim this by half

Next, pin each unpressed edge onto either side of the slit, right sides together.

Stitch each side in position down as far as the tailor’s tacks, you should stop a little bit short of the bottom edge.

Trim down the seams by half.

Now flip the work over so that you have the wrong side uppermost. Press the seams in towards the placket piece on the left as you look at it then fold over like this, pin and tack in place. Now turn the work back over again.

Working with the right side uppermost, edgestitch the placket you have prepared.

Keeping the right unfinished placket out of the way, you need to position the left placket (the one you have just sewn) layered like so with the triangle at the base of the slit. Carefully stitch just below the original staystitching. This is with the inside of the work uppermost, neaten the edge and press downwards.

Now work on the right placket (it is on the left as you look at it though) Fold up the lower edge as demonstrated here, pin and tack in place. Edgestitch on the right side of the placket only as far as the bottom, do not sew across the bottom yet. Now work your buttonholes while the placket is still separate.

After working the buttonholes, lap the placket over the underneath one and stitch it in position like this.

You should now have a placket which looks something like this.

Next I moved on to the sleeve opening which is neatened with a very narrow bias strip.

I found the bias strip included to be incredibly narrow, especially for a fabric which is loose weave and a bit prone to fraying so you may want to cut your strips a little bit wider. I made the strips work but they were very fiddly. Instead of edgestitching as per the instructions I sewed them with a tiny zigzag which I hope will hold them firmly in place. Or you could slipstitch them by hand if you prefer. Next, fold the bias evenly in half and stitch across the top at a 45 degree angle, I’m not sure if the diagram intends you to sew through the sleeve too, I didn’t.

The way I’ve sewn it, once it’s finished, the sleeve opening and cuff looks like this.

The hem facings are sewn on next, then join the shoulders using French seams. This is a useful technique if your fabric is very fine, sheer, or frays badly, or if you don’t own an overlocker. Obviously you can sew a flat seam and overlock/zigzag if you prefer. You could also topstitch these seams if you want a bit of interest on them. My personal preference is to press shoulder seams to the front, this is so that the seam is slightly less visible when looking at it.

I found the collar instructions straightforward so I won’t go into them as well, I opted to catch the lower edge down by hand so that I had control over it and a really neat finish. I also added a label from Little Rosy Cheeks.

Inside the finished collar

The sides are then French seamed, be careful with the step at the lower edge and make sure you don’t take too much seam allowance on the seams because this could throw out the overlap at the top of the opening. I used the bartack stitch on my Pfaff to secure it as this could be a point of weakness further down the line.

I opted to sew two rows of edgestitching along the top of the hem facings, just to add a bit of interest.

Finally, the cuffs are sewn on and the buttons added.

all finished

I’m all in Merchant and Mills today, these are their Eve trousers in cream drill which I bought at their Rye store back in September 2021.

I cut a straight UK 12 with no modifications and I’m 5’5” tall but if you’re taller you might want to lengthen the shirt as it’s quite cropped at the front.

I’m very pleased with how the Ellsworth has come out, I’ve worn it with flat-front Eve trousers but it will look good with a skirt or even a dress under it for layering. I’m going to have a look through the stash to see what other fabrics I can make it in now!

I’m delighted to have the opportunity to write for Backstitch because it’s a lovely little shop which I’ve been visiting for a few years now. It’s in a beautiful rural location and sells a really nice, well-considered range of quality fabrics and indie patterns and sewing books. As Ambassadors we are provided with gift vouchers to shop in the store, it’s entirely up to us what we make and how much of those vouchers we spend, the balance can be kept to spend on another occasion if we choose to. If you don’t live anywhere near enough to pay a visit yourself then Backstitch has a recently revamped website to shop through too, their range of yarn, knitting and crochet patterns are all on there too.

I hope you have found my review useful, that’s always my intention, do write in the comments if there’s something which still isn’t clear and I’ll try to help.

Until next time, happy sewing

Sue

Sewing and other bits in 2021

Well that was another weird year wasn’t it!? I’m not gonna lie but I’ll be glad to see the back of 2021. For every good event there seemed to be two or three stinkers which I found made it really hard to see positives anywhere. I know that there were some good things though and I’m incredibly grateful to have the life that I do so I don’t want to dwell on the downside, let’s move into 2022 with an air of cautious optimism!

I entitled my round up for 2020 as ‘sewing in a time of pandemic’ and I’m so glad I didn’t know then that 2021 was going to be ‘part two!’ Anyway, I’ve collected a few photos to round up my sewing and other events I was able to get up to during 2021 although I’m not sure if they are particularly chronological…the length and colour of my hair at any given time will give you a bit of a clue!

I’ve decided that the Trend Utility pants are definitely my favourite trouser pattern of the year-I had made two pairs by the end of 2020 and finished a third, in orange linen, in spring 2021 and I’ve worn them all fairly constantly. I find them interesting to make, they aren’t a completely straightforward sew and need a bit of concentration but they are all the better for that. The leg flaps are their USP and they are a design feature that make me very happy!

I was wearing them in the late summer when we finally escaped with one of our daughters on a week’s holiday, along with another favourite, the Maker’s Atelier Holiday Shirt.

The orange linen pair were perfectly autumnal at Kew Gardens in November, and the colours were absolutely stunning.

This hacked Sewing Revival Heron dress was one I finished in 2020 but wore a lot in 2021, and will do in 2022 as well.

I’m still not convinced about the ribbon bow but I haven’t actually done anything about changing it.

I was looking for new sewing challenges early in the year during the next long lockdown and Mr Y was the lucky recipient of a few items including this Carmanah sweatshirt by Thread Theory. The fabric was kindly provided for me as I’m part of the Lamazi blogger team.

This is the Thread Theory Finlayson sweatshirt I made for Mr Y at the start of the year and he’s worn it on heavy rotation. These items of menswear led to me writing an article for Love Sewing magazine about sewing for men, and by men, in the spring and I joined Maria at Sew Organised Style podcast to chat about it too.

Mr Y celebrated his 60th birthday quietly at home in March, we both wore hand-mades!

…and we celebrated a second wedding anniversary in lockdown too. Cabin fever had taken hold a bit as I dug out my wedding dress and flounced around the garden in it! I really hope our 33rd anniversary this year can be outside of the house!!

Let joy be unconfined because mid-March saw us going for our first vaccination and I wore entirely hand sewn garments to mark the occasion, including a Holiday Shirt, a Nora sweatshirt and my self-drafted rain coat.

I was selected to contribute some articles offering sewing tips and advice for an online sewing project in the early spring but after just two such items they just stopped contacting with me or replying to my emails. Bit rude I’d say, I’ve no idea what was wrong because they never had the courtesy to tell me, and I’ve no intention of wasting more time on them frankly.

Moving on…

Lucy at Trend generously gifted me the kit for the Box Pleat shirt from her capsule shirt collection. Like all her patterns it is so well drafted, I should have gone down at least one size though (my fault for being overly-cautious) There are currently three patterns in the shirt collection but I know there are more in the pipeline.

I only made two Minerva projects in 2021 and this Tabitha dress from Tilly and the Buttons book ‘Make it Simple’ was one of them. I really like the Art Gallery fabric and I’ve had plenty of wear from it.

I was so happy to see my dear sewing chum Claire after far too long at the Alice in Wonderland exhibition at the V&A in the summer. It was an interesting show although I suspect we nattered all the way around it! [it seems there was a ‘wear checks’ memo sent out too!]

As you know if you read my posts I like to reuse patterns if they have lots of options so I’ve sewn several variations of a number of Sewing Revival patterns during the year, including the Fantail top below which I made in an ancient remnant in my stash which I believe somebody once paid 90p for!

The wide elastic casing in the front hem is such an interesting detail.

This is another version of the Fantail featuring jersey cuffs and back hem.

This Sewing Revival Kingfisher top was made using the fabric from a summer dress which I never wore. It’s been a satisfying project because I worn it often (I‘d had a haircut by this point too!)

I enjoyed the challenge that this Heron adaptation presented because I used linen jersey provided for me by Lamazi fabrics. It was a learning experience and I shared lots of hints and tips in the accompanying post. It’s been such a lovely fabric to wear, it’s very comfortable and it has a beautiful sheen which is not particularly obvious in this photo.

I made another pair of Simple Sew Palazzo pants in a linen remnant I bought from Lamazi, they are comfortable and very nice to swoosh about in! That’s a M&M Camber Set top with them.

I sewed a third version of the Trend Bias T-shirt dress which I made specifically for an occasion at Capel Manor College in north London when the Japanese ambassador to the UK came to plant cherry trees. I’ve only had a chance to wear it once so far because the weather was getting colder but I have every intention of wearing it a lot in 2022-you know I love a floaty dress and this pattern is perfect for that!

I managed to get an outing to the Fashion and Textiles in the autumn to see ‘Beautiful People’ and it was well worth it because the colours and fashions were so uplifting.

One of my personal favourite posts of the year was this one where I had rediscovered lots of my college work and sketches from the 1980s. It was so much fun to find them unexpectedly and it seems it was a trip down memory lane for many of you too.

I wrote just three specific Sew Over 50 blog posts in 2021, the first was a summing up of lots of ideas and inspiration for how to sew more sustainably which the followers of the Sew Over 50 account contributed. There was a lot of it and it definitely worth a read.

Judith Staley joined Maria on the podcast to chat about it too.

I was a guest editor on the Sew Over 50 account in the autumn when we chatted about mannequins in our sewing practice. Many of you contributed some brilliant and insightful comments, I wonder how many people have gone on to buy a dress form, or use the one they have differently, or more often, as a result?

Sew Over 50 stalwart Tina generously shared with us the many resources she has gathered together over the last couple of years for sewing and adapting patterns and clothing after a breast cancer diagnosis. It has been one of my most read articles on the blog since it was published in the autumn and I know Tina is happy for followers to contact her via Instagram for any advice or support she can offer them. For me, she very much represents the positive aspects of being a part of this worldwide community.

One of my favourite ‘in person’ events in the sewing calendar, Sew Brum, quietly took place in the autumn and my lovely mate Elizabeth kindly put me up overnight and we had some quality shopping and sewing time together. Our friend Melissa even joined us for a couple of hours for a Zoom sew! Plus I ran in my first (and so far, only) Park Run too! phew, it was a busy and almost-normal 48 hours.

We got VERY wet at the Park Run but we earned extra smug points in our me-made Fehrtrade running kit! [I wrote a post about the Tesselate Tee that we’re both wearing here]

I didn’t even buy any of this green fabric at Barry’s in the end…

I finally made a jumpsuit (or two) at the end of the year, it’s the Cressida by Sew Me Something Patterns.

I made this second one to wear at the first Lamazi open day in November. It was so much fun to be a part of and I really hope there will be the opportunity to hold more events during 2022 because it so good to meet up with people in person and to just chat about sewing all day.

This was fun outing to the V&A that actually happened rather than being cancelled like so many others, it was an in-person talk by Oscar-winning costume designer Sandy Powell and it was absolutely fascinating. I’ve really missed these talks in the lecture theatre and it was great to be back.

Being an actual grown-up at a fun event!

I splashed out on this unusual quilted fabric from Merchant and Mills and sewed it up into their Fielder top plus I wrote up a blog post on how I made the too-wide elastic fit around the neckline.

These Eve pants are also a Merchant and Mills pattern and they became my second-favourite trousers of the year, made in their Elinore checked linen and worn with a long-sleeved Holiday shirt in Swiss Dot.

This second Hug hoodie of the year by Made It Patterns is definitely one of my favourite makes of the year. It looks tricky but is very straightforward to sew and the style lines look very effective.

For quite a while I had wanted to organise an informal sewing event and they were finally able to happen in October and November with #HertsSewcial It was such a joy to be reunited with my Sew Over 50 stalwart friends Ruth and Kate, along with meeting several other online friends like Bev and Elke in real life for the first time. We had so much fun sewing and chatting together, the time flew past far too quickly and I very much hope I can organise some more in the New Year, current situations permitting.

Can you tell that Ruth, Kate and me are happy to see each other again after far too long!?

And my final sewing treat of the year was being able to meet up with Judith Staley in her hometown of Edinburgh!! It was much too brief but absolutely better than nothing, we had so much we could have talked about but that will have to wait until our oft-rescheduled and much looked forward to sewing get together next spring…fingers tightly crossed!

My final personal make of the year was another Maven Somerset top in this celestial jersey I bought at the Lamazi open day. It’s festive without screaming CHRISTMAS!

And so ends another year of sewing and other stuff, as well as the new garments I’ve sewn for myself there were many other occasions when I wore, and re-wore, favourites which didn’t need to be photographed! I fervently hope 2022 brings better times for everyone and that we can adapt to our new or changed ways of living. Sewing will continue be a big part of my life and I hope there will be some new and exciting projects and opportunities during the year. There are so many wonderful people in this community and the support and encouragement that swirls around has been so important during another trying year-I hope I will get a chance to meet up with more of you in person during the next twelve months.

Until then, thank you for reading my wafflings, happy sewing and a very happy New Year,

Sue

a shirt for Mr Y

 

I spend most of my time making things for myself or other people and, apart from a few pairs of PJ shorts, I haven’t made anything for Mr Y in years. I thought that needed to change so when we were away for the weekend in November we paid a visit to Sew Creative in Bury St Edmunds. It’s recently been acquired by Sew Much To Do, Ely although the name hasn’t changed at the moment. I only went in for some beeswax which they were out of stock of at the time but never mind, plenty of other things to look at hehe! They’re a lovely, busy little shop with knowledgable and friendly staff, as is so often the case for me, I wish I lived nearer (although it’s probably best for my bank balance that I don’t….

For a small shop they have a very extensive selection, and upstairs was also a wide range of sale fabrics too. I spotted a nice burgundy check which I steered Mr Y towards-he thinks he chose it himself but what he didn’t know was I’d already bought him a burgundy jumper for Christmas and that this fabric would go very nicely with it!! Devious eh?

He also saw a dark green cotton which he liked so I let him choose that for himself…I had no agenda for that one. I hadn’t got a man’s shirt pattern to hand so I guessed at 2.5m of fabric for each, which turned out not to be enough really-more of that later. 

I ordered a couple of patterns from Sew Essential because Burda patterns were half price at the time. My beloved isn’t a slim fit kind of chap so it would have been foolish for me to pick a super-trendy indie pattern for him because it wouldn’t fit and he wouldn’t wear it! Traditional shirts are the way to go for him.

Mr Y chose style C but when I came to lay up the pattern pieces it was obvious, because of the check print, that I was going to be a bit short for all the pieces. It’s a two part collar so I opted  to cut both under-collar parts in a contrast grey cotton that I had a small amount of, and the inside shoulder yoke too. Doing this saved just enough fabric although the matching wasn’t going to be spot on, Mr Y wouldn’t be super-critical about that (even if I was myself) Although Mr Y is 6’3″ tall the body and sleeves would have been monstrously long on him so I shortened the pieces a fair bit and, ultimately, they were a much better length for him-thus saving fabric too.

The pattern went together well by and large, the only difficulty I had was in following the instructions for front plackets. Burda patterns expect you to have a good working knowledge of construction ( which I do) so they give a minimal amount of instruction. I think my problem was that I’m so used to making female button plackets that I couldn’t quite get my head around swapping them the opposite way around. I had one of Mr Y’s other shirts there for reference so I worked it out in the end. This is a useful tip if you’re ever not sure what you’re doing, have a similar or identical ready-made garment to hand so that you can study how it’s put together. If you keep in mind how you want your finished garment to look this can help as you construct it. Having one of his shirts also meant I didn’t need to keep trying it on him which is handy because he’s often out!

cutting the patch pockets on the bias meant that I didn’t need to have perfect matching and it looked more interesting.

contrast internal yoke

This is the underside of the collar and the inside yoke. You can also see that I cut the inner collar stand in two parts as well because it doesn’t match at the CB.

The finished cuffs with their buttoning plackets, again not a perfect match but good enough.

The first finished shirt.

Mr Y was delighted with this shirt and imagine his surprise when he opened the parcel containing a matching jumper…

I made the second shirt in the green fabric without his knowledge (he thought I hadn’t had time before Christmas) Strangely I managed to get everything out of the 2.5m this time, partly I think because I didn’t need to pattern match, the fabric was the same width as the burgundy after all.

The box pleat on the back.

The two-part top collar

top-stitching around the sleeve-head and the patch pocket.

The sleeves are a basic shirt-sleeve construction which is done on the flat so no slightly  tricky insetting of sleeve-heads.

A detail on the patch pocket-I always sew little triangles to make them a bit stronger.

The side seams feature an insert detail at the hem (blurry photo, sorry)

I cut one corner of the cuffs at an angle on the green, to give it a quirky detail.

So there we have it. Burda 6874 is a good basic mens shirt pattern, I would describe it as an intermediate level because there are details like the two-part collar and plackets on the cuffs which need a bit of understanding and interpretation, so definitely not for a beginner. If you’re looking for next-steps though this could be a project for you to try but maybe make it in a plain or non-matching fabric for your own sanity.

I don’t currently have any pictures of Mr Y modelling them because he’s a bit shy so you’ll have to take my word for it that he likes them, and looks very nice in them!

Happy Sewing, and Happy New Year!

Sue