A few hem finish suggestions-a Sew Over 50 topic

Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.

Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.

I’m beginning here with a faced hem…

This was the hem of the first Refashioners project I attempted. It was a jacket made from two pairs of my husband’s old jeans and because I wanted to use as much of the reclaimed fabric as possible I cut shaped facings for the lower edge. As you can see I also finished the edge with bias binding I made from offcuts of dress fabric.
The inside of the finished jacket looked like this. I understitched the lower edge of the facing to help it roll better and also slip-stitched it in various places including the seams and pocket bags to secure the facing without the stitching showing on the front.
This is also a much more shaped facing on the hem of Tilly and the Buttons Orla blouse. This can be a beautifully neat finish on a curve, it gives some ‘weight’ and crispness to the hem too and makes it less likely to curl upwards on blouses for example.
This Orla blouse was from 4 years ago, I like the exposed zip in the back too (the instructions for putting it in were excellent if I remember correctly)

The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.

Helpfully, my fabric had horizontal stripes, some opaque and some sheer so I started by placing the crin on the front of the fabric and lining it up with the bottom edge of an opaque stripe. It is stitched on very close to the edge being careful not to stretch the crin as I sew, it’s important it lies flat. By sewing the crin onto the right side of the fabric when you flip it to the inside the raw edge of your fabric is enclosed underneath. To be honest I was making up the method as I went along because my experience of this technique previously came from altering wedding dresses which used it so this isn’t foolproof. I would strongly advise you to try a few samples first so that you have the version which looks best for your particular garment. [the eagle eyed amongst you might notice in my photo that I’ve sewn the crin to the wrong side of the fabric! I obviously did it and photographed it before realising what I’d done. As this was four years ago I don’t have any other photo!]
Once the crin is turned up to the inside I slip-hemmed it by hand, it looks a bit messy on the inside because the black shows up but it’s absolutely fine on the right side.
the finished dress, it’s one of my favourites I’ve ever made, and it’s a partial-refashion too because the velvet bodice used to be a skirt!

If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.

The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.

Sew the binding on very close to the raw edge, this was a Simple Sew Lizzie dress
Here I made my own binding which is first sewn on with a 5mm seam allowance and then understitched which is what you see here. I made this Grainline Farrow dress for a magazine review
The hem is turned up and I’ve slipstitched it in place by hand.
This is the same technique with ready-made bias binding.
the finished skirt.
My final example is the little christening gown I made from a wedding dress.

If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.

This is one of my variations on the Camber Set
I roll-hemmed a straight strip of fabric here which I then pleated onto the sleeve using a fork!
I roll-hemmed a straight strip top and bottom and gathered it onto the sleeve here.
An extended length sleeve on the River pattern from Megan Nielsen, roll-hemmed and elasticated

I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.

Using strips of iron-on interfacing to stabilise the area where the cuffs fold up
This is felted-type woollen fabric where hand stitching is unlikely to show through but if you have a finer fabric I would make the interfacing strip wider so that I then caught the inter with my stitches and not the fabric itself. See the next photo to explain this better.
You can see the interfacing is above the hem line here and I’ve herringbone stitched it by hand. You can also see how I’ve created a chain link to anchor the lining to vent opening on the back of the skirt.
the hemming stitches aren’t visible from the outside using this technique.

For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.

If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.

Personally I always think the stitches show a bit too much no matter how hard I try to get them really tiny. It’s very easy to catch a bit too much fabric, or none at all! In truth I probably don’t practice enough!!
This Regatta dress from Alice & Co was an ideal application because the skirt has a straight, unshaped hem.

I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.

the binding is sewn on the inside first
the binding then flips to the outside to become visible.
This dress was made for the Simplicity pattern hacking challenge last year
Instead of the usual hem on this dress I created a casing which I threaded elastic through.

I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.

the hem from the inside
the finished hem from the outside.
the finished dress, I was off to a wedding!

The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.

Inside the hem the corners are mitred.

Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.

Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.

turn stitch and trim
make another narrow hem, stitch a second time on top of the first line. Press. There will only be one row of stitching visible on the outside.

If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.

attaching a band to the hem.
The finished dress (worn with walking shoes during lockdown!)

This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.

I put a piece of Stitch and Tear behind the fabric as I sewed.
It looked like this after I finished
It will look like this on the reverse.
gently pull away the backing and then carefully snip off the excess fabric up to the stitching line.
Eventually the hem looked like this, the sleeves are trimmed with Broderie Anglaise

I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…

I had some narrow strips of white cotton lawn lying around so I joined them to make a piece long enough to go around the whole hem.
I folded the strip lengthwise.
attach the strip to the hem, raw edges together.
I understitched it, plus there’s a band on the front which is what you can see folded over in order to enclose the facing eventually.
The band folds back to enclose the hem facing.
There’s a little bit of puckering on the reverse here but this is invisible from the front, a good press will sort that out.

To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.

Stitching the hem with the overlocked edge rolled to the inside.

This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.

the bias strips were applied right side to wrong side on the shorts hems.
the bias strip is on the inside at the moment
It is then turned up to the outside where I trimmed and stitched it with ricrac braid.

I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!

Until next time, Happy Sewing

Sue

a SewOver50 discussion about fabric choices.

At the beginning of May @sewover50 posed us this question, “How do you assess your fabric purchases? Is cheap fabric inferior, or can you sometimes find a genuine bargain? Does expensive always mean quality…and what does that mean? How do you weigh up long lasting plastic-based fabrics against ‘natural’ fibres that may gradually wear out but where ageing can add to the appeal of the fabric?” The discussion was prompted by follower @kissntuss asking if anyone else had encountered the problem of buying and prewashing fabric, spending time carefully sewing it up only for it to turn into scruffy rag after its first proper laundering?

So, lots to think about there and I waded straight in with this comment, “Ooh this is a mine field! I’ve always said that over time and with experience you learn to judge between ‘cheap’ and ‘inexpensive’ because, in very general terms, I’ve often found cheap to be of inferior quality whereas ‘inexpensive’ would be a better or good quality fabric at a very reasonable price. Since the boom in home dressmaking over the last few years I think there are now a lot more fabrics which are quite pricey but you’re paying for the design, or the brand, not necessarily the superior quality of the fabric which they are made with. Price is not always a guarantee of quality unfortunately. Personally I would still much rather feel a fabric in my hand to better judge the quality BUT there are some very good fabric websites who sell excellent quality cloth so order a swatch if you aren’t sure. We’ve learned the hard way with our fabric-buying mistakes and I still get it wrong from time to time even after all these years.” These are strictly my own thoughts you understand which I’ve formed over many years of sewing and clothes-making, and learnt through good and bad cloth-buying experiences. I use the terms ‘cheap’ and ‘inexpensive’ loosely when I’m trying to help others with their fabric choices, there are no hard and fast rules.

Well, it seems many of you broadly agreed with me, at least in part, and had plenty of other brilliant insights to add. I’ll attempt to bring the threads (see what I did there?) of a long discussion together here. You could always go back to the original post too and wade through it if you really want to…

So, is cheap fabric always bad fabric? Of course not necessarily I would say. I’m sure many of us have encountered things like thin polyester/cotton with uneven printing and which is suspiciously stiff even though, as my Grandmother would say, “you could shoot peas through it!” It’s usually got lots of dressing like starch or excess dye in it which will wash out and leave the fabric flimsy with little body or oomph to it, it will literally turn into a droopy rag, possibly twisting and/or shrinking and losing colour with each subsequent wash too. These are to be avoided at all costs except for craft-based projects like bunting perhaps. Cheap jersey can be awful too because it’s thin and spirals badly (you know how cheap RTW T-shirts twist after a wash or two? That. However, ‘cheap’ could also be a bolt-end or remnant length of a good cloth sold at a fraction of its original price. When you’re shopping, using a general rule of thumb of 1) and most importantly, do I really like it? 2) is it truly fit for my intended use? and 3) do I really need it? (Ha!) If I have any doubts about these then I walk away and save my money, even if it’s just a few pounds. 

[I just want to add a story about some fabric I bought a few months ago to make a wedding dress toile. I made a trip to Walthamstow market in east London where I know there are some great fabric shops and the famous #TMOS ‘The Man Outside Sainsbury’s’ market stall. I had tried online to pick up a cheap cloth which was as similar as possible to the actual fabric I’d be using for the dress itself but the descriptions weren’t good enough for me to be confident they were worth buying. Anyway, off I toddled, what often happens at Walthamstow is that shop premises become available on short leases so very unglamorous but stuffed-to-the-rafters fabric shops pop up in them. You can never be sure they will still be there a few weeks later though. They usually sell deadstock or overstock from nearby factories or suppliers and everything is at rock-bottom prices until it’s gone or the lease runs out. I was after a decent weight triple crepe-type cloth, the colour and fibre content was irrelevant because it was for a toile, and I was really hoping to pay around £3-4 or less per metre. I was absolutely thrilled to find a pale mint green cloth of a really good weight for just 75p per metre!! Perfect for my needs so I bought 6m of the green and another 4m of a bright pink for me! My biggest problem then was carrying it because crepe is a really weighty fabric and I had gibbon arms by the time I got it home on the train! ] 

Hasan, the famous (if you live near London) Man Outside Sainsbury’s in Walthamstow

Returning to my own comments I mentioned ‘inexpensive’ cloth which, by my own definition, I would say is fabric that is of a good or excellent quality which normally sells for quite a high price but is now being sold for a lot less than usual. Ex-designer fabrics, dead-stock and factory end of lines are a few examples of this and there are more and more websites and shops starting to source these because they are a brilliant way of stopping wasted fabric going into landfill. And don’t forget those remnant bins, there might be gold dust in there but always double-check there are no nasty surprises like faults, flaws, dye or print discrepancies, and unfold the piece to make sure it’s roughly the size it says it is without terrible wonky ends, it isn’t a bargain if it turns out to be unusable.

In the UK there are areas of the country which have had a proud textiles- making heritage over the centuries and it is still possible in some of these places to buy quality cloth directly from the mills, or from shops and markets. For example, Harris Tweed is still made in the Isle of Harris, Scotland (Vivienne Westwood has been a devoted user of their cloth for decades now) A number of followers commented that in their areas of Lancashire, Yorkshire and Nottinghamshire they were able to buy beautiful quality cloth often as remnants or from mill shops. Most of us don’t have this opportunity and whilst in an ideal world we would all love to be able to feel the quality and suitability of the cloth in our hands before buying, for many online shopping is the only realistic option [and if you’re reading this during the worldwide Covid-19 pandemic then it’s the only option for pretty much everybody at present] @frugalisama said “there’s nowt like fettling fabric”, that’s basically stroking fabric to the uninitiated! Visiting bricks-and-mortar stores does offer the chance of personal interaction with others though, I can never resist poking my nose in at other customers deliberations and choices so I regularly have some lovely conversations about one of my favourite topics with complete strangers!

For me, the difficulty with buying online is relying completely on there being accurate descriptions of factors like the weight, handle, suitability for purpose and a true indication of colours and scale of print. 

Some websites (and obviously there are thousands and I only have experience of a few) are very diligent and give a lot of good information and are happy to send swatches whenever possible. Small companies can offer a very personal service and it’s nice to support them too, getting to know what fabrics they offer which makes them stand out from the big hitters. 

But even with lots of information it’s still all too easy to make duff choices, on more than one occasion I’ve ended up with fabric which was much thinner or thicker than I had hoped or wanted for a particular project, or the print has been a much bigger scale than I thought it was from a photograph. I find a 100m reel of Gutermann thread a really helpful reference point in a photo because we almost all know exactly what size they are, or a ruler in the photo is also helpful. My idea of what is suitable for a skirt or trousers for example might be very different from someone else’s because years of experience and attendant disasters has taught me the hard way. There’s very little you can do to speed up this process of learning although a comprehensive book like Fabric Savvy by Sandra Betzina could very useful-it’s a treasure trove of information of many, many different types of fabrics, their uses, fibre content, sewing and handling tips. There is a whole world of wonderful fabrics out there to discover and it’s a pity to limit ourselves to a very small pool. Cotton is not just cotton for example, it’s poplin, lawn, voile, calico, muslin, denim, corduroy, canvas, Ankara, towelling, sateen, chintz, jersey, the list goes on and that’s just one fibre. Shopping with someone who knows their fabrics is not only fun but educational too.

So does the cost of the fabric have a bearing on the quality and your likelihood to buy it? @jenerates, amongst several others, made the point that if she spends more on the cloth it means she takes her time and more care with the making of each garment. She is also much more inclined to care for the garment more diligently, to make it last longer. Some fabric is pricey because it’s expertly made from top quality materials with designer names attached, and often these fabrics might be made from natural fibres which at the top end can be very pricey. Silk has always been seen as a luxury fabric for good reason, but then so can an Italian-made synthetic-based fabric too, it is still superb quality just not a natural fibre. But being a good quality natural fibre is absolutely no guarantee of it’s longevity or durability, quite the reverse sometimes. 

I think there are a number of popular fabric brands at present which have beautiful designs printed on them but the base cloth doesn’t always justify the price point. What do we do about this if, after you’ve diligently sewn a garment together, within a few washes it’s like a rag? If it were a garment purchased from a reputable retailer you could probably negotiate a refund or exchange but that’s no good in this instance, I suspect we fume for a while and then put it down to experience if we can’t find a way to fix it. I would be curious to know, has anyone ever gone back to the online supplier and successfully got a refund or exchange?

@paulalovestosew very kindly answered my questions directly because I know she is very happy to use manmade fibres and fabrics. We all have a tendency to believe that natural fibres are always best but what if they don’t work for your lifestyle, or the garment you want to make? Paula, like many of us, has been sewing her clothes for years, she loves to scour remnant bins in fabric stores and, like me, gets enormous pleasure from squeezing as much as possible from the least amount of fabric. If you check out her account you’ll regularly see not only a dress but also golfing attire all made from the same cloth. For her, stretch jerseys are perfect because they are comfortable to wear, never fade or distort in the wash, there are masses of colours and designs available, they roll up without damage in a suitcase and they last for years. Paula knows her own style which suits her perfectly and she always looks immaculate, style doesn’t have to cost a fortune.

What about vintage or recycled cloth? This can be a great way of using unusual designs or fabric types to create totally original clothes although vintage cloth might need a little more aftercare to keep it in good condition though because of the age of the fibres. It can be difficult without a burn test to know exactly what it was in the first place. If it’s been left folded for a long time it might break down in the creases for example, or it might not take well to being exposed to sunlight or sweat after many years but if the alternative is that it doesn’t get used at all then why not turn it into something nice! Charity shops, yard sales, swaps, Ebay and elderly neighbours are just a few of the places you could find some hidden gems. My 93 year old neighbour Pamela has given me some beauties for example and she’s always thrilled to see me in something I’ve made with one of her fabrics. 

I made this beautiful Maker’s Atelier Holiday shirt in Liberty cotton voile given to me by Pamela and when she saw me wearing it recently she commented that the fabric might not have belonged to her in the first place but to her mother!! Goodness knows how old that could make it but it’s still going strong for me and it’s one of my absolute favourites in warm weather.

Many people try to take into consideration how ethical a fabric is; is its production harmful to humans or the environment through the use of chemicals, dyes, dangerous processes, or is it dangerously straining or poisoning the local water supply? can it be successfully recycled? Will it wear well or will it need to be replaced more often, can it be laundered easily or should it be dry cleaned? There are so many considerations that there is unlikely to be one definitive answer, we must each make our own judgments according to our beliefs and moral framework. Buying organic or other ethically-certified fabrics is a good start but they do often, quite rightly, come with a higher price. You may be interested in reading my post on this topic, Fashioned from Nature, an exhibition at the V&A in London two years ago.

At the risk of being controversial, I do think there’s sometimes an element of fabric snobbery at play by which I mean natural fibres good, synthetic fibres bad. By all means buy and sew with what you prefer but there is a place for manmade fabrics which isn’t that easily replaced. If you sew swimwear or activity clothing which require technical fabrics then they are highly likely to be chemical-based. Yes, I know there are now bamboo and a couple of other alternatives but they are extremely difficult to source for home sewing at present unless you know where to look, and they certainly aren’t cheap either. If you’re interested in learning a lot more about how textiles have always been a part of our daily lives I recommend reading The Golden Thread-how fabric changed history by Kassia St Clair. It’s a fascinating insight into textiles and materials of all kinds, my only quibble is that there are no illustrations or photographs in it all which seems an extremely strange choice given that the subject matter is so visual.

Gosh, this has turned into a long post, I hope you had a coffee to sustain you? Realistically there is no right or wrong answer, it’s what works for you, your lifestyle, your budget, your capabilities and that is different for everyone. Maybe a good idea is to buy the best you can afford if your budget allows but the pricier the fabric is the more I would say it matters to make a toile first. Cheap and cheerful is perfectly good if you’re just starting out in dressmaking, and always make a toile in as similar a fabric-type as possible to the finished article. You will make mistakes and poor choices-much like life!-but you’ve got @Sewover50 as a goldmine of support and information to help along the way, I’m a huge advocate of sharing my sewing failures as well as the successes. 

As I’ve said throughout, there is no absolute right or wrong answer to these questions, we make our fabric choices based on any number of personal, and wider reaching factors. I’d really like to conclude with Fiona’s comment, she sees her handmade wardrobe as “my memory album on a rail”, definitely something worth cherishing. 

Until next time,

Happy sewing

Sue