Fantail follow-up!

I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.

the first Fantail top

This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.

There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.

I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.

Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]

Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.

The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.

Pin the side seams together like so first, the raw edge of the deep elastic casing for the front is already pressed up by 1cm and the bottom of the ribbing is lined up against the notch for the casing.
Next, fold up the front so that it sandwiches the ribbing like this, pin in place. Now sew the seam starting at the fold on the hem. If you haven’t used this method before you may want to sew one side first and check it to make sure you’re happy with it, it can be a little confusing initially but it’s worth persevering.
Turn the hem to check it is level and, if you’re happy with it, neaten the seams however you wish. This is before I neatened the side seam but it will look like this on the inside.
The outside will look like this, so neat!

One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.

At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]

The ribbing is currently not edge-stitched in case it causes puckering

I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.

Until next time, Happy sewing

Sue

a new Lamazi blog, sewing menswear!

It’s a new year (apparently?) so it’s time for my next Lamazi blog and I’m sewing something for Mr Y! I don’t know about you but I’ve felt I needed to work on something a little different to most of my other recent makes, I’ve made myself some lovely garments that I’m now frustrated not to be able to wear much as I want but Tony has been in need of some new clothes for a while now so it’s his turn to be on the receiving end! 

I don’t know what you think but I’ve found that men’s wear patterns and suitable fabrics are definitely a bit harder to come by than women’s or children’s, they are out there if you’re prepared to look but it’s not easy. I’ve made him some nice shirts in the past which you can read about here, and I had made him a couple of Thread Theory Finlayson sweatshirts recently and then my good friend Claire told me about their Carmanah top which was quite a new pattern. It has several options so you can individualise it, for example with full length or quarter zip, hood or collar, and with or without kangaroo pockets. 

Lamazi offers a range of co-ordinating See You at Six fabrics with plain and patterned French terry, and ribbing, all dyed to be a perfect match so we chose the ‘Clouds’ design in Bistro Green. 

I’ve never purchased ribbing fabric before so I was unsure how much to buy, initially I requested far too much because the pattern instructions made no sense to me. Liana at Lamazi and fellow-blogger Sharlene advised me so I had 1metre in the end to be on the safe side and that was sufficient for an adult garment. If you find yourself in a similar situation I suggest you measure the appropriate pattern pieces to get an idea, or try contacting the fabric seller and I’m sure they would be happy to advise. For an adult garment it almost certainly needs joins whilst something for a child probably wouldn’t.

Based on T’s measurements (he’s 6’3” and, although he’s lost about 28lbs during lockdown, he’s not skinny) I cut him a size large but I added about 2cms at the CF and CB folds at the bottom because the previous version was just a little snug at that point. He likes the body length which comes down to about hip level, and the sleeves are nice and long too so I didn’t need to add any length to them. 

The making up instructions and diagrams are quite clear, I got into a bit of a pickle using the twill tape neatening method though, partly because I printed off the booklet a bit small so I couldn’t easily read the instructions(!) and partly because the green twill tape I had managed to buy was wider than required! Anyway, I persevered and it looks OK in the end. This tape method wasn’t essential and overlocking is perfectly satisfactory, I just thought I would try it for a nice finish on the inside, it definitely adds more complexity if you want to up-skill though. The collar version has a nice detail of the chin guard over the zip which is worth adding for a quality finish.

I put the twill tape on the wrong piece of collar initially! This is the outer collar and the tape should have been sewn to the inner collar. Incidentally, I added iron-on interfacing to the top collar to give it a little more body. It doesn’t call for it in the instructions but I felt the first version could have done with a bit more structure. Have a look at the photo below to see what I mean.
This first version was made with cable knit bought from 1st for Fabrics I think the collar is collapsing a bit although it’s not really a problem
I added twill tape to neaten the front edges before inserting the zip
I tacked the zip into the opening before topstitching in place.
second attempt at the tape trim! the tacking you can see is holding the fold at the top of the collar in the correct place until I’m ready to top stitch it later on.
The tape I bought was too wide so I sewed it on higher than the instructions and then trimmed away the excess in order to turn it up and sink stitch from the right side.
The finished collar from the inside. The green is a very difficult colour to photograph and the zip and tape are a slightly better match than they appear here. I bought both of those from Frumble Fabrics, they have a wide selection of all sorts of haberdashery that I haven’t seen elsewhere.
I finish overlocking by putting the threads on a large-eyed tapestry needle and slot it back through the stitching for a couple of centimetres like this which keeps it secure and tidy.

This fabric is quite pricey but, in my opinion, it’s really lovely quality and it sewed together beautifully. There’s just enough stretch and it would be a good weight for sweatpants or a sweater dress too if you’re tempted. This is the first time I’ve used a range of co-ordinating fabrics and the finished result is really pleasing. Equally you could mix and match colours or prints using remnants for this pattern too, because of the way it’s cut in segments, especially if you go for the full zip version. 

T has gallantly modelled the finished result-he’s delighted with it-he’s usually my slightly impatient photographer so the boot was on the other foot today!

Have you sewn anything for the men or boys in your life? How do they feel about it? Luckily T isn’t very demanding where his threads are concerned and he’s always been very happy with the items I’ve made him so far…..I haven’t attempted trousers in years though so perhaps that will be next? I’d interested in which patterns or fabrics for men you have been able to source, I think it’s an area for improvement in sewing terms.

Until next time, happy sewing

Sue

The Sewing Revival Heron dress hack

Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…

wearing the blouse on my trip to Paris for the Sewcial in May 2019
my very first version of the Heron dress…it has pockets!

While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.

All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.

Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.

Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.

I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.

And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.

I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.

I grabbed a cheeky selfie in John Lewis with my sewing friend Ruth in the autumn, we can only dream of when we can meet up again at the moment though sadly. that’s my upcycled jeans jacket I’m wearing

The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?

Until next time, happy sewing

Sue

Trend Utility trousers TPC12

My first blog of 2021 features my last make of 2020. After several quiet weeks where I didn’t sew any garments, I had cut this project out a couple of months back but then hadn’t felt motivated to make them at the time…the days between Christmas and New Year was the right time to get my head around a nice involved project though. There has been so much going on in the UK recently, (understatement!) especially in these last few weeks, that I wanted something I had to concentrate on to take my mind off other events outside of my control.

If you’ve read my blog in the past you’ll know by now that I’m a big fan of Trend Patterns but these are the first trouser pattern of theirs that I’ve tried.

I saw Lucy wearing her own version of TPC12 on her stand at the Stitch Festival in London back in early March 2020 (just before everything went weird) and it was the unusual split hem detail that initially I really liked. On closer inspection there are some other nice features too, like the topstitched front seams with optional faux pocket flap, and a button fly. These are the kind of details that attract me to a pattern but I would say before I go much further that this is definitely an intermediate pattern as a result, you will need to be a confident sewer or at the very least game to increase and expand the skills you have already. Before I left the show that day I bought some nice heavier weight plain black linen from Rosenberg’s to make them with.

It was then literally months before I decided to tackle the pattern though. I’m not going to lie, and don’t judge me either, but I had piled on weight during lockdown which I wasn’t happy about and as I got bigger the last thing I wanted to do was make a pair of trousers that emphasised that fact. Eventually however I began dealing with the weight issue which in turn encouraged me to revisit the Utility trousers in the early autumn.

Instead of using the linen for the first pair I bought some grey stretch cotton twill from Backstitch near Cambridge. It’s lovely fabric for trousers and a very good quality at a reasonable price. Because the Utility’s are a fixed waistband I went by my waist measurement at that time (it was shrinking!) so I chose the UK 16 and I could tell that the hip would on the big side but that was OK.

I patiently traced off all the pieces which took a while because there are quite a number of unique pattern pieces that need to be cut right side up (RSU) Labelling them all is of paramount importance so that you don’t end up with unusable pieces of fabric cut the wrong way. Once I had cut the fabric out I left all the pattern pieces attached to the fabric until I had either interfaced them or until they were ready to be sewn. I made both my versions exactly (apart from fit alterations) as the pattern but you could leave off the pocket flap detail by cutting a pair of side fronts, or you could have two pocket flaps by doubling up those pieces instead. An advantage of having so many single pattern pieces is that you might have a more economical layplan because they will interlock better, folded fabric is a much less efficient way of cutting out, a single layer just takes a bit longer.

I said at the start that this is an intermediate pattern in my opinion and that is largely because the hem vents and the button fly are quite involved, although not actually difficult, plus I found the instructions and diagrams were a bit tricky to follow. I didn’t go wrong but they do require absolute concentration. What I’ll do in this blog, so that’s useful to you if you decide to make the trousers, is simplify the order of making down to a basic list which you can use in conjunction with the actual instruction booklet. I won’t give you specific, press here, topstitch there, instructions though, they are in the booklet and the diagrams are very detailed.

My first piece of advice, after you’ve attached all the interfacing to the relevant pieces and transferred all markings to the fabric, is to overlock all the cut edges (except the waist and fly front) first. I don’t normally do this because I prefer to overlock as I go along but it makes more sense here to do it as a batch process, just make sure you don’t trim away too much or lose your notches in the process.

Start by making the ‘pocket’ flap [make up the optional pocket bag if you are going to have one but set it aside for the moment] also, make the back darts and set the pieces aside for now.

Join the front seams for both fronts as far as the vent markers, do not join the fronts to the backs just yet. I found it easier to have only the vent sections to work on flat first although the instructions tell you to join the fronts to the backs. Once you’ve made both the vents except for the final single topstitching to hold the flap in place and are ready to turn up the hem join the fronts and backs at the side seams first. Now complete the topstitching to hold the vent in place then join the inseams, turn up the hem and topstitch to finish. [If you’re using the additional pocket bag I would add it whilst the leg is still open and flat, before sewing up the inseam. I sewed mine on earlier and it got in the way a bit when I was joining the various leg seams]

Pin and partially stitch the crotch seam as per the instructions then apply the outer waistband and press the seam up towards the waistband. [If you want to include belt carriers I would add them before attaching this waistband so that they are caught in the waist seam, the tops of the carriers will be enclosed when you add the facing]

Next, make the right fly section and buttonholes as per the instructions and diagrams. I’ve included a photo of where I stitched through the layers of the right front to hold them all together, I’m not sure if this is quite what is intended but it works-I couldn’t make sense of it otherwise!

the pencil is pointing to where I’ve added the row of stitching to keep the layers together.

Make the left fly front and attach the waist band facing, I’ve included the photo below of how this should look from the inside (yes I did use jazzy overlocking thread just because…)

the completed grey version showing the button fly and jigger button

Sew the remainder of the crotch seam to complete it, then sew the entire crotch seam again about 1-2mm away from the first stitching line.

Sink stitching-to complete the waistband-is simply the industry term for ‘stitch in the ditch’.

Obviously there are points where you would be advised to try the trousers on to check the fit as you go so you could do this by pinning on the stitching line (parallel, not at a right angle!) to avoid unpicking. The advantage of having a split waistband on the centre back seam (like good quality men’s trousers) is that you can fit into the small of the back more effectively.

So that’s, hopefully, a simplified method for you, it isn’t that I think the instructions aren’t good, it’s just that I got a bit confused between what was written and which diagram to follow, and that’s why I wrote it down in a clarified form as I made the second pair.

The fit of the first pair is technically not that good but they are soooo comfortable. The waist was a good fit initially although I’ve lost more weight since then so it’s very roomy now. The major issue (and I’ve read this in a few reviews) is that the crotch length is very long and looks quite droopy. You can see this in the photos of my grey pair, and this makes the cropped leg length look a bit too long as a result. For the second pair in the black linen I redrew the pattern down one size and also folded out 3cms horizontally at hip level on every pattern piece to reduce the rise. The second pair are a much better fit but that won’t stop me wearing the grey pair, it doesn’t particularly bother me that they are overly generous because the shaped waistband can’t fall off my hips anyway. Yes the grey pair are very baggy but that’s fine.

The black linen pair are a better fit at the waist, there’s still plenty of room (too much room?) over the thighs but I don’t mind that. Maybe I’ll shave a little off the next pair, or maybe I won’t…

Overall I’m a big fan of the Utility trousers and I’ll probably make more, now that I’m getting better with the fit. The design details are worth the effort but it is a project you’ll want to take some time over, I had to turn off the radio so that I could concentrate completely and I read aloud each instruction several times to ensure I was going the right way. I sewed matching topstitching but you could use a contrast thread, or maybe you could line the waistband and button stand with contrast fabrics? Apart from the pocket bag if you add one there are no other pockets so you could add some in the side seams quite easily I would have thought, or patch pockets on the back perhaps? I quite fancy a pair made in chunky cord too…

I hope you find this useful, or I’m happy to try and help if I can.

Until next time, happy sewing

Sue

Sewzine- a new independently published mini-mag

Just before Christmas I was contacted by founder and editor Jillian Bagnall and offered a complimentary copy of her new, independently published sewing-based mini-magazine called Sewzine to review. I didn’t know what to expect, initially I thought it was an online print-at-home publication but I have been very impressed because it is a nicely produced print magazine on quality paper and with high production values. The graphics are clear and appealing and there’s plenty of attractive photography and illustrations for each article, plus, because it’s been independently published, that means there are no adverts to take up space, it is all content.

the cover of the first issue of Sewzine, the leading article about bra-making features on the front

Let’s take a look at a few of the articles inside…

I have to admit that bra-making is something I’ve never been very tempted to try, I’d rather leave that to the experts, but I thought the article was very well written because it gives a balanced view of why it’s worth considering making your own bras, or why it might not be for everyone, I was almost persuaded! I thought the information contained in the piece would be extremely useful if you’re about embark on bra-making, including lists of patterns, materials and findings that you would need, where to source them and a tick list to fill in as you collect them together.

I found the article about wool and woollen fabrics really interesting and very well researched, there was all sorts of information about the various sources of woollen fibres and types of fabrics. Like the bra-making article it was well-illustrated as well.

I had a chuckle at the “Bring it Back?” article because I spent so much of my early career cutting and making puffball, or ‘bubble’, skirts. I enjoyed the exploration of the style from its early days to more recent incarnations, I can see this as a thread of articles revisiting other iconic styles in the future…hot pants anyone?

I also really enjoyed the idea of revisiting patterns from a year or two back to reappraise them. We are constantly bombarded by new new new patterns but I’m always happy to reuse patterns I’ve enjoyed making previously. By chance, the pattern featured in this issue is the Grainline Patterns Farrow dress which I’ve actually made 3 times myself, including one review that featured in Sew Now magazine.

The mini-mag is aimed at intermediate sewers but I think this shouldn’t put off less experienced makers. I enjoyed the chatty yet informative style of writing and a lot of time and effort has gone into the inaugural issue, it’s clearly been a lockdown passion project. There are no free patterns or other inducements as an incentive but that does mean that the editorial is unbiased so if you are intrigued to have a read for yourself then follow the link here to the Sewzine website where you can order a copy of the first issue for yourself (it’s priced at £5.75 per copy) Jillian would also welcome any ideas you might have to contribute articles for future issues, contact her via sewzine@gmail.com While you do that I’m off to have a go at the crossword…

Until next time, happy reading

Sue

2020-Sewing in a Time of Pandemic

Well what a year 2020 turned out to be!

It’s been such a tough time for so many and being a part of the wider sewing community has been a very real lifeline for many people. Those of us that enjoy making our own clothes already realise the obvious benefits this can give us; total freedom to choose types, colours and patterns of fabrics as we wish, the ability to emulate high-end or high street fashion at the price-point we can afford and the skill to make clothes fit our own particular body type, to name but a few. It shouldn’t then come as a surprise that the wider world, whilst searching for activities to entertain and occupy them during the long weeks and months of lockdown, discovered (or rediscovered) that home sewing can be creative, absorbing and rewarding which is a VERY GOOD THING! Who knew there was a link between doing a creative activity and a more balanced sense of well-being??

To be honest it doesn’t matter what that activity is, or whether you’re really any good at it, the fact that it can take your mind away to other less stressful places for a time is what matters.

But at the start of the year none of that was of much interest to most. I was extremely fortunate in January to go on a cruise to the Caribbean so I made a couple of new things to fills ‘gaps’ but mostly I took old favourites…cue multiple photos of 3 versions of The Maker’s Atelier Holiday shirt on heavy rotation! One new item was the Trend Square dress I made in fabric given to me by Dibs from Selvedges and Bolts the previous year, I got a lot more wear later on in the summer.

Within a couple of weeks of getting back, Judith Staley and I hosted the very first Sew Over 50 meet-up in London. We very much hoped, and expected, that it would be the start of many more such meet-ups between followers of the @SewOver50 account all over the world but it wasn’t to be…not yet anyway.

If you’ve been reading my blogs for a while you’ll know that as well as meeting up for sewcials with fellow sewers I really enjoy my visits to exhibitions and galleries. At the end of February I caught up with Janet Poole who is a fellow Lamazi blogger at the Stitch Festival in London, I had such a lovely day shopping and chatting with her, and her friend Great British Sewing Bee winner Juliet too. We didn’t realise it then but we were very fortunate to be able to attend the event at all and I wouldn’t be surprised if others who went didn’t catch the-virus-that-shall-not-be-named because it was so crowded.

About a week after this I was able to go to the stunning new Kimono show at the V&A and, although we didn’t know it at the time, that was to be the final outing for several months…

I wore the new Homer & Howells Cissy dress (and failed to remove my coat from shot which I chucked on the floor!)

So then we entered the first long lockdown and that’s when sewing (and some baking) became my primary occupation. During this time I had some blogging commitments for Simple Sew Patterns and Lamazi fabrics to complete. For my first Lamazi post I made a Trend patterns Bias T-shirt dress which was a tough make, not because the pattern was difficult but because I was making the dress for a wedding that never took place. And worse than that, I was making the Bride’s gown too so I still have an almost-finished dress waiting for the day that the wedding can happen.

In all honesty I hated how I looked in this dress because I had piled on weight and felt very self-conscious in a fitted dress. It was a lovely pattern made in beautiful fabric but I felt I was doing both a disservice. Eventually I did wear it in September by which time I had lost weight and it was a delight to wear! I’m sure I’m not the only one whose state of mind has fluctuated wildly this year and my self-confidence was rockbottom when this picture was taken.

I know I’m very blessed in that I have little to actually complain about in my life but that does not mean that these months of lockdown didn’t take their toll mentally so, when the call to help make scrubs came, it was something I could actually do! Eventually I made 10 sets, I believe they were headed to a maternity department in a London hospital.

I continued to keep busy by doing a few refashioning projects because the desire to make new things that weren’t going to be worn outside the house was just too depressing. I love the act of making clothes, the planning, the cutting out, the sewing, because that was taking my mind off what was happening in the real world but how could I justify making new clothes that I had little use for? Even dressmaking was starting to become a negative because I felt guilty about it. By doing some refashioning projects using things I already had, other than new fabric, I made a few items including pyjamas for my final Simple Sew post and another pair using the PJ pattern in the Great British Sewing Bee book written by Alex and Caroline of Selkie patterns and for which I had made a couple of samples. I used 4 old work shirts of my husband’s which were very well worn! I also made (eventually) two pouffes as well which took care of loads of scraps and off-cut furnishing fabrics and were extremely satisfying! I also refashioned a very old and redundant heavyweight cotton curtain into a Dawson coatigan by Thrifty Stitcher.

Early on in lockdown I had the pleasure of talking to Maria Theoharous for her Sew Organised Style podcast on a couple of occasions. I’ve set up a separate page so you can access this to be able to listen to her inspiring SewOver50 guests every week. One of our chats revolved around how we each arrive at our fabric choices for specific purposes or projects, I wrote this topic up as a post which you can read here, and I also wrote a further post which came from when I was guest editor on the @SewOver50 account and we talked about our cutting out processes-did we cut and make one thing at a time, or cut several things and have multiple projects on the go? Scissors or rotary cutter? Pins or weights? It was wide ranging and fascinating with so many excellent ideas and practices. I hosted another discussion about a variety of hem finishes later in the year and you can read that one here. Incidentally, by the end of this year @SewOver50 has reached an incredible 25,600 followers!!

One of my stranger tasks this year was to carry out a socially-distanced dress fitting on a doorstep! Before lockdown started I had been commissioned to make a dress for a work colleague of my daughter Katie. Thankfully I’d opted to make a toile of the bodice which I’d fitted just before lockdown kicked off so I managed to get the dress to a good stage of completion. However, I got to a point where I definitely needed her to try it on because even if she couldn’t wear it for the event she had hoped to, it would be nice for her to take delivery and wear it around the house!! So I went to their place of work and handed the dress over at arms length to Tracey to put on in the staff toilet, then she came out onto the porch where Katie, under my direction, pinned the dress for me. I took a few photos for reference too. From that I was able to finish and deliver the dress and my client was delighted with it…phew

One of the regular sewing highlights of the last 4 years for me has been the Sewing Weekender which generally takes place in Cambridge, UK in August. The organisers took the bold decision to put the whole event online instead which meant that many more people could ‘attend’ from all over the world. Myself and Judith Staley were delighted to be asked to contribute a video message each which was very nerve-racking but it turned out alright in the end. I published a transcript of mine here, along with the original video (you’ll notice that I had abandoned my signature pink hair by this time because, quite frankly, what was the point of bothering!) The Online Weekender also raised a significant amount of money which was divided between 4 charities. 

As lockdown started to ease in the summer I was able to get out and about a couple of times. I joined an al fresco rag-rugging workshop in Hertfordshire run by Elspeth Jackson of Ragged Life which was so enjoyable, and I visited a couple of exhibitions in London including the Kimono show again, plus Andy Warhol at Tate Modern and Tricia Guild at the Fashion and Textiles museum both on the same day. Since then though things have been shut down then reopened, then shut down again. My heart goes out to everyone who is trying to run a business or an organisation that relies on visitors through their doors to make them viable, their future is very uncertain.

I’ve made a few other garments during the autumn which I’ve been really pleased with including the Prada-inspired shirt dress and a pair of Utility pants by Trend Patterns (not blogged yet) but I feel I’ve run out of steam with my sewing right now and I never thought I’d say that. My own teaching classes restarted for a total of 5 weeks in October but they’ve stopped again. I know some have adapted by using Zoom or other platforms but it just wouldn’t work for me, I feel dressmaking is too hands-on and needs real assistance for tricky bits, holding things up to the camera isn’t good enough sometimes. And being part of a group and all that shared enjoyment is a huge part of it too. I’ve had fairly regular online catch-ups with some of my lovely sewing friends and that has been a joy, albeit not as good as seeing them in the flesh.

Mr Y was the lucky recipient of a few handmade garments too during 2020 when I made him another two Kwik Sew 3422 shirts, and not one but two Thread Theory Finlayson sweatshirts! I’m happy to say he’s delighted with all of them and I’ve got plans for another sweatshirt for him in the new year.

I’m working on my own pattern which I’ve self-drafted so hopefully that will be something positive for the new year but I need occasional assistance from more expert friends and that’s making it a drawn-out process which would have been so much more fun person-to-person.

One final project I was commissioned by a friend to make was a Christmas chasuble for her to wear as she presides over her Christmas services in church. A chasuble is essentially a fancy poncho which the priest wears over their other vestments and Wendy wanted me to create one with a Nativity scene on it. She sourced the base fabric with my advice, and a printed quilting cotton Nativity which was sent from the US. This was square so I carefully cut it into approximate thirds with the central third featuring the stable scene and the star for the front, another third with Bethlehem for the back and the remaining third I cut into two parts to use on the stole, which is the long scarf priests wear around their necks. All of these I attached by appliquéing around the black outlines (I was literally making it up as I went along!) Wendy is delighted with the finished result (thankfully) and I’m sure she will enjoy using them during the Christmas season.

As I finish writing this (2 days before Christmas) we have no idea what lies ahead…some countries seem to be slowly recovering whilst the UK as a whole seems to be sliding further and further into disaster, or maybe not? I should try to think more positively as scientists have worked tirelessly to make a vaccine which will gradually be rolled out. Personally I’m a long way down the list for it but that’s absolutely fine, we must protect the most vulnerable first.

I’m making an effort to look cheerful in this most recent Lamazi blog make, but the wine was slightly off watered down Rosé from my daughter’s fridge and it was 10.30 in the morning! I’m genuinely pleased with the dress though and in spite of everything I’ll wear it on Christmas Day because there’s plenty of room for expansion!!

This has probably ended up not being a-not-entirely-coherent post but that’s kind-of appropriate I reckon! Wherever you are and whatever the new year brings for all of us I’d like to thank so many of you for reading my posts, sending me lovely or encouraging messages. Being a part of the online sewing community and Sew Over 50 in particular has been an absolute joy and a lifeline at times. We need to lift each other up more often, call out injustices when we see them but not to the extent that it becomes bullying of individuals, that isn’t right either. 2020 has been a year of huge upheaval, I plan to restart 2021 with fresh sewing plans to help me to feel more positive about it…it’s going to be a bumpy ride!

Until next time, stay safe!

Sue

a multitasking Festive outfit

The Festive season is often a reason to make, or buy, a special new outfit to wear for office parties or Christmas Day but this year’s Festive season things will be very different for most of us. I don’t want to be entirely negative though so, as part of the Lamazi blogger team, I thought I’d make something which is a little bit Christmassy but will double up as a ‘regular’ winter dress too. 

I’ve chosen the cord velvet from Danish Design in a gorgeous shade of aubergine-I’m always a sucker for purple-but it comes in several other beautiful rich shades including a sumptuous gold and a stunning teal too. I picked this fabric because it’s a medium weight stretch jersey and has soft pile which makes it lovely to the touch. I’ve made a dress but you could easily make tops or wide-legged pants in it, or babies and children’s clothes too because it’s washable and crease resistant. 

Whilst I love a complex make to really get my teeth into I felt this wasn’t a garment which warranted lots of time. Making a special Christmas once-worn garment wasn’t appropriate any longer so I wanted something quite simple but adaptable and for that reason I’ve picked the Somerset T-shirt by Maven Patterns. I’ve made a few of these now, the bones of it are beautifully simple, it has a self-neatened bateau neckline, a slightly fitted silhouette and four sleeve options. I’ve chosen the Bishop sleeve with a long cuff but I’ve hacked the sleeve to make it even fuller, and I’ll lengthen the body to create a dress finishing below the knee.

Another idea was to add a flared skirt which looks nice but didn’t think I would use it as much as the straight version.

The Somerset has excellent very full instructions with lots of tips and advice to get a good finish. There’s a useful sheet to write all your information including body measurements and fit alterations, and a fabric stretch gauge to check you have enough stretch for the pattern to fit properly. You can also list the needle type and size you’ve used, stitch type and length and anything else you might want to remember for another time. 

To increase the size of the sleeves I took the bishop sleeve pattern and drew 5 vertical lines from each of the notches from shoulder to hem. Each segment will become slightly wider as it gets nearer the bottom edge so make sure they are even in size.

Cut a piece of spot and cross or tracing paper bigger than the pattern as it is, mark a grainline running right down the paper and then lay the pattern piece on top of it, matching the grain on the pattern to the grain line you’ve just drawn. Next, I carefully cut up to the top of the marked lines taking care not to snip right through at the top, keep it attached by a tiny amount to act as a pivot point. [If you don’t want to cut your original pattern piece I suggest you trace off a new one to use instead] Then you splay the hem edge apart by a few centimetres each, I added 2.5cms between the each of the ‘side’ segments and 5cms to the central one. By doing this you’re adding fullness at the hem but not altering the sleeve head. You could put additional fullness to the sleeve head by opening the top edge too if you wanted. I lengthened the sleeve by 5cms too so that it would have plenty of blousy fullness into the cuff. 

Trace around the new shape using a tracing wheel or pencil and cut out the new piece transferring all markings. One final change I made was to add a bias grainline because I knew I wanted to play with the stripe direction of the rib on the fabric.

I had pre-washed my fabric and partly tumble dried it on ‘low’ before letting it dry completely on the clothes airer, it seemed to survive the experience just fine. 

I made an arbitrary choice of how long to make the dress by simply holding the tape measure at my shoulder and seeing where it came to at about mid-shin! I attached another piece of spot and cross to the bottom of the front and back pattern pieces and drew on the skirt length I wanted, plus a generous hem. I knew I would have to make some adjustments to the hip and thigh during the fitting stage, just make sure that the hip and thigh measurements are plenty big enough because you can always remove some, it’s much harder to add later! 

The ‘cord’ runs across the width of the fabric and I wanted the rib to run down the length of my dress which meant I had to fold the fabric across the width. Try not to twist the fabric if you have to fold this way, I marked a single rib by following it across the width with pins so that I can see it clearly. Fabrics like corduroy, velvet or velour have a pile or ‘nap’ which will shade so if you cut some pieces facing one way on the grain and some pieces running the other way then you will end up with a garment that looks like it’s been made with two different colour fabrics, even though you know that isn’t the case. If you’re unsure what quantity of this type of fabric to buy go with the ‘with nap’ amount on the pattern information and follow the one-way layplan to cut out.

I marked the rib across the fabric with pins so that I could be sure it was folded correctly and would not be twisted.

Once I’d cut all my pieces I followed the making instructions which are very comprehensive. If you have a walking foot for your machine I strongly recommend you use it because velour like this has a ‘pile’ and has a tendency to ‘creep’ as you sew so you might find that it starts off with all the edges matching but by the time you get to the other end the two fabrics are no longer matching. I also strongly recommend you tack any seams you are unsure about. You could use a million pins but by the time you’ve done all that you could have basted it in place which does the same job and usually more effectively. I was able to coverstitch the neck and the skirt hem on the Pfaff Coverlock 3.0 I have on loan as a brand ambassador but it works just as well by overlocking the raw edges and twin-needle stitching them down, or zigzag and twin-needle, or two rows sewn singly if you don’t have a twin needle. When it comes to pressing a fabric like this, if you don’t have a special needle board (and few of us do) then you should press on the reverse at all times. You could place a towel on your pressing surface and lay the fabric on top so that the pile of the cloth is against the pile of the towel which will help protect it. Use a pressing cloth as well. These tips will also apply to regular corduroy or any non-stretch fabrics with a pile too.

The bell of the sleeve is gathered using shirring elastic which helps to retain some of the stretch required for the cuff. 

Once the sleeves were in I sewed up one side seam directly on the overlocker and then pinned the other side seam to fit myself. This was because I didn’t know if I’d need a split at the hem to be able to walk in the dress and I didn’t want to end up with loads of unpicking!

First I tried it right side out to get an idea of how it was fitting initially, then I turned it inside out to pin.

I looked at the fit in the mirror first of all and the sewn side seam was quite wavy, this could be cured by either adjusting the differential feed on the overlocker so that it doesn’t happen, or you could stitch the seam on the sewing machine and then overlock the edges [This is what I opted to do because I could see I had to take a fair bit off the side seams anyway to achieve a fit I was happy with] Then I put the dress on inside out in front of the mirror and pinned out the excess. I turned it right side out and tried it on again to check the fit, then finally sewed both side seams on the sewing machine, I used a ‘stretch’ needle, a ballpoint or jersey needle performs the same task. Either use a short straight stitch or a straightened out zigzag, make some samples to see which works best for your particular fabric. 

Now I tried it on the dress inside out to adjust the seams
I pinned out a fair bit of the side seams to give more shape through the waist and hips.
still Inside out
Finally I put the pinned dress back on the right way around to check I was happy with the fit before making the adjustments.

Lastly, the cuffs go on and the skirt is hemmed. 

And that’s pretty much it, it pops straight over the head so no tricky closures, because of the stretch it didn’t need a split, and that means there’s room for Christmas lunch and it won’t look like a dish rag after spending the afternoon curled up on the sofa watching Christmas telly!

cheers!
I’ve dressed it down with an ancient knitted gilet plus a wide belt, long boots and my much loved Alexander McQueen scarf
I love a scarf to keep my neck warm!
It could be the strangest of Christmases but let’s raise a glass to a much better 2021

I have to say that I’m really happy with this dress because it ticks all the boxes I wanted it to. It’s comfortable but it looks Christmassy, it looks great with opaque tights, heels and jewellery, but also with boots, a chunky belt, a roll neck top underneath for extra warmth or a cosy scarf…and did I mention it’s comfortable! #secretpyjamas It also has the advantage of rolling up and going in the corner of a bag or suitcase and coming back out again not needing a press. Bonus!!

If you have a favourite T-shirt pattern you could try lengthening it into a dress, Tilly and the Buttons Tabitha from Make it Simple does that. You could browse the SewOver50 post I wrote listing loads of go-to T-shirt patterns for inspiration, or maybe copy a RTW one you already have?

At 160cms the fabric is very wide so a little will go a long way, and because it’s so soft it would be lovely for children’s wear too. It needs a little bit of careful handling but a lot of that is in the ground work. Make sure you lay it up and cut it accurately to minimise unnecessary stretching or distortion (try to keep it flat on the table or lay it up on the floor) pin or tack the seams so they don’t move about and press carefully as you go and you should be fine. 

It’s been an incredibly tough year for so many and I wouldn’t blame you for not feeling like making anything new to wear. However, if crafting and creating bring you joy and respite then you could view it as a gift to yourself, and when you choose to buy from small companies like Lamazi and Maven then you are helping them too.

Thank you to Lamazi for providing me with the fabric for me to write my review, and I hope you find it helpful. 

Until next time, Happy sewing

Sue

I made myself a rain coat!

Considering it’s a raincoat this is a project that came out of a clear blue sky! In other words, I had no plan to make a raincoat until, that is, I spied this gorgeous showerproof Missoni fabric on Dibs’s Selvedges and Bolts website. I’m not normally a sucker for impulse purchases of online fabric but this one with it’s eye-catching colours just had my name on it! 

Once I had it in my hot little hands I had to come up with a design for a jacket. My starting point was a vintage pattern for a kagoule-type top which is probably from the late 50s-early 60s but there’s no date on it sadly. As was typical of patterns from that period it’s a single size, medium, which I already knew was OK because I’d used it once before about 4-5 years back. I also have a cheap-as-chips packamac which is a nice style but turned out to leak like a sieve! I would use this as my sample to follow how components like the zip and a storm flap on the front go together for example. There were a few other patterns which gave me some ideas including The Maker’s Atelier Utility Coat and from these various sources I sketched a few drawings to come up with a design I liked. 

As the fabric was expensive I only bought two metres so I had to progress carefully for each step. I made a new pattern for most pieces because the new version would be mid-thigh length and have a full length front zip opening to be covered by a storm flap, plus I repositioned the shoulder seam forwards to minimise possible leakage through the seams. I altered the side seam shaping a little by curving them out slightly, to give a bit more room for bulky jumpers/sweatshirts. I reused the original hood and sleeve patterns, plus I settled on two pleated patch pockets with separate flaps on top. To reinforce the shoulder area I made an inner lining pattern which acts as an internal yoke. 

I read up a few general tips for sewing shower proof fabric before I started-I didn’t need it to be waterproof so I didn’t tape each seam but I did lengthen the stitch slightly, to reduce the number of puncture holes through the fabric which could potentially let water in. I also used a fine Microtex needle to reduce any friction there might be whilst sewing too. This fabric is different to other woven fabrics because of it’s special coating so any mistakes which have to be unpicked would leave holes. It’s possible to press it carefully but not too hot or you could melt it. Use a pressing cloth over the top and warm the iron up incrementally on a scrap piece until you’re happy with the temperature.

It took me a little while to source the hardwear I needed, many suppliers of zips had the length but not the colour, or the colour and not the length! Eventually I bought two open-ended zips of different colours from Jaycott’s.  I couldn’t seem to find any suitable coloured round elastic online so eventually I settled on narrow grosgrain ribbon from VV Rouleaux for the hood and back waist detail instead, plus I sourced some small spring cord-lock toggles to secure the ends where needed. I found the lining for the hood and the shoulder yoke amongst fabrics I already had.

I sewed the jacket up in ‘bite-size’ chunks of time rather than pushing on through-mostly because I was often waiting for something to arrive in the post before I could do the next part. As I wasn’t following a particular set of making instructions I was winging it to a large extent, the order of making was often influenced by another section of the garment having to take a priority at certain points.

the front storm flap somehow came up a bit long which wasn’t a problem, it just meant some unpicking and resewing-at least it wasn’t too short, which would have been worse.

It would have been better if the sleeves could have been just 4-5cms longer-I’m not sure why they seem short because I’m sure they weren’t on the original sweatshirt-perhaps the big difference in fabric types was a factor? Anyway, no matter, I added a small section of elastication to the top of the cuff to bring it in slightly to help prevent drips seeping back up my arms if possible! I should add that normally I would pattern-match the print but I didn’t see any need to do that for this jacket.

elasticated cuffs and pleated pockets

Because this is very much a ‘make it up as I go along’ garment I used some of the ribbon to neaten the neck/hood seam and jolly nice it looks actually!

the finished neck area, I chose to use the purple zip in the end.
Inside, the shoulder area is stabilised with two layers of lining
I gave a bit of shape to the back by adding a channel with ribbon slotted through and secured with the toggles.
I found these pliers amongst my stuff, as you can see from the price they were bought a goodly number of years back! It turns out they work fine and I managed to apply four successful snaps to the front.
Finished!
You won’t miss me in this!

For an unplanned garment I’m very pleased with the outcome, I love the colours and I hope it will be useful, it folds up pretty small so I can shove it in a bag if I’m going out and don’t want, or need, to take a heavier coat. It’s very much one of a kind! In normal times I wouldn’t have been sourcing everything online, I enjoy browsing in real shops for haberdashery and trims, but not just at the moment.

Until next time, happy sewing

Sue

Prada-inspired shirt dress

This whole project all came about because I couldn’t resist some ex-Prada fabric I spotted on my friend Dibs’s website, Selvedge and Bolts! She specialises in sourcing gorgeous quality high-end and ex-designer fabrics from Italy and France. This one caught my eye because funnily enough it doesn’t scream ‘designer’ but I liked the graphic print which stands out amongst so many florals.

I ordered 2 metres although I didn’t have a plan for it, then it occurred to me that I should look at actual Prada designs to see if there were any that were at all wearable by someone like me (ie. not six feet tall or looking about 17 years of age!) Somewhat surprisingly there were some really lovely shirt-dresses in eye-catching fabrics.

This was just the springboard I needed so, after a bit of a search through my patterns, I found this McCalls 7470 which had originally been free with Love Sewing magazine at some point in the recent past. The Princess seam lines and shirt styling were exactly what I wanted except I would change the skirt to be a dropped waist dirndl to echo the original.

The #7470 is a Palmer Pletsch fitting method pattern which I’ve never attempted before. I’ve been thinking lately that many of the garments I’ve made in recents months have either been old favourites or very simple shapes with little use of interesting techniques or style lines. I needed to stretch my sewing muscles a bit more-use them or lose them-so I set about following the instructions to tissue fit the bodice first. By a combination of body measurements, knowing my body quirks, periodically trying on the pinned tissue and using my padded-out dress stand Doris I arrived at a fit that I was happy with.

I’m not going to claim it was particularly easy but there are a lot of written instructions on how to approach it on the accompanying sheets to help you, plus online tutorials too. I’d recommend making a toile (or even two) if you need to before using your fashion fabric to avoid expensive mistakes.

I knew fairly early on that my 2 metres of fabric wouldn’t be enough for what I had in mind, and I didn’t want to waste my lovely Prada fabric so I opted to make the pattern instead in a vibrant printed stretch cotton which I’d bought in Paris at last year’s Sewcial event.

I took my time sewing the dress, I wanted to enjoy each part of the process. There is a two-part collar for example, pleated patch pockets with flaps, and a band running right down the front. I had a few problems with insetting the sleeves though. I’d made a small alteration the back of the arm scye which resulted in it getting a little smaller so I expected there to be a discrepancy but it was much bigger than I anticipated, the sleeve head was far too large and wouldn’t fit without puckering and gathering. I looked at a few examples of #7470 on Instagram and many versions were either sleeveless or didn’t mention it as a problem. Anyway, after a lot of fiddling about in the end I dropped the arm scye down to make it larger so that the sleeve head fitted properly.

The skirt was simply 3 rectangles, two for the front and one for the back which I pleated onto the shirt top using a fork to make each pleat even.

I used some plain white cotton scraps to make a faced hem.
I joined them into a long strip, folded lengthwise to about 5cms in width.
It was sewn onto the hem, all raw edges together.
At the centre front I enclosed it within the band for a neater finish.
the turned centre front band
the final stitched hem-it needs a good steamy press here. You can read more about hem finishes in my recent post here.

So what started as a Prada-inspired dress for one fabric has still ended up as a Prada-inspired dress but made in a different fabric! I finished the whole thing off with these beautiful buttons from Textile Garden all the way down the front.

the buttons look great
I love the detailed pockets too.
the collar is nice and crisp
the sleeves are two-part with a deep cuff
Yup, I’m happy with that!
I would have added a self-fabric belt like the Prada original but there wasn’t enough fabric left, just scraps.

So that’s my Prada-inspired dress up to this point, just not made with actual Prada fabric. I have a plan for it though because there was another shirt-dress that caught my eye…

I love the idea of a completely different fabric for the sleeves and the back
The front isn’t as I’d want it but I really like how the sleeves are such a contrast.

I’m really pleased with the outcome and the way it fits, and because I took my time and didn’t rush, it was an enjoyable process. I’d fallen into the habit of making simple projects, I felt something more complex was needed.

Until next time, happy sewing

Sue

Refashioning a Simple Sew Kaftan into PJs

Two years ago one of my early makes as a Simple Sew blogger was the Kaftan pattern made in a tropical print cotton lawn kindly given by Doughty’s online fabric store. It was very much a ‘holiday’ garment but, even so, I didn’t wear it as much as I’d hoped because whilst the fabric was quite lightweight there was too much of it around my legs, it was probably a size too large and the whole thing just looked quite bulky. It would have been better in something like a very lightweight cotton voile or Batiste, or a printed chiffon or georgette as a swimsuit cover-up. 

Anyway, rather than make another new garment for my next Simple Sew post I’ve decided to refashion the Kaftan into pyjamas instead, retaining the top section and cutting shorts from the remainder using the Lapwing trouser pattern. 

I studied myself in the mirror wearing the Kaftan and decided to reduce it to approximately 25cms long from the original waist seam at the side-I would make it level all the way around although the waist seam rises up at the centre front. With the remaining fabric of the skirt I would make the shorts

I took the cord out of the waist and initially decided I would replace it with elastic instead although eventually I changed that plan. I felt the sleeves were a bit long and restrictive to sleep in so I shortened those too by about 5-6cms. I removed the pompom trim first although I didn’t reuse that in the end because I opted to create a curved opening on the shoulder seam instead, to soften the lines.

calculating how much to remove from the sleeve and underarm seam.
I took a good chunk off the sleeve and the underarm seams.
after I cut excess off one sleeve and side seam I placed the pieces onto the other side so that they mirrored each other.

I partly unpicked the shoulder seam and overlocking sufficiently far that I could re-overlock the edges singly and then roll hem finish them so that the overlock stitches were enclosed.

curving the shoulder seams

I also took quite a bit of fullness out of the bust section at the underarm so that it would fit closer to my ribcage, I didn’t remove any corresponding fullness from the newly-shortened skirt though, I simply pleated it up to fit the top part and rejoined them together at the waist seam.

I pleated the ‘skirt’ fullness into the waist seam.

I neatened the new hem using the overlocked rolled hem method again and finally trimmed the waist seam with co-ordinating pink rick-rack from Backstitch. I decided against putting elastic in the original casing because I felt it would ride up while I slept and become annoying around my ribcage. This has proven to be the right choice because the top is comfortably loose without being huge.

Moving on to the shorts, I used a RTW pair I’ve had for years to compare measurements and also to compare against the size chart for the Lapwing trousers. I traced off the pattern in a size 14 because I wanted to create a hem similarly-shaped to my RTW ones for the shorts, they have a slight upward curve at the side seams (I dithered about adding side pockets as per the pattern but in the end I left them out, I thought about adding a patch pocket on the back instead but I didn’t do that either!) 

I was able to fold the original front skirt section down the centre front line and cut a pair of front shorts pieces from that. I placed the piece as near to the top as possible so that I had the maximum amount of fabric left to cut the bias strips from. 

As is very often the case the back section of trousers was bigger than the front so this meant I couldn’t cut it out of folded fabric. I laid the fabric out flat instead and cut them singly using the centre fold as my guide for the grain and making sure to flip one so that I had a pair, not two the same! 

In order to hem the curve I made a wide bias band pattern piece which, ideally, I would have cut one for each leg but the remaining pieces of fabric from the front skirt didn’t allow me to do that so I cut several shorter pieces which I joined to make a long enough strip. 

cutting the bias strips from the remainder of the front skirt panel
joining 3 shorter bias strips to create enough length for two leg openings
attaching the bias to the hem, RIGHT SIDE to WRONG SIDE!

I joined each side seam first, neatened it and pressed towards the back. Having joined the bias strips I pressed over one long edge by 1cm. In order the self-neaten the hem I placed each strip RIGHT side to the WRONG side of the shorts (see photo) and stitched it in position.

bias sewn in position, this then flips to the outside and encloses the raw edge neatly inside it

Then the strip flips up to the right side, thus also being right side out and enclosing the raw edges. You could simply top stitch this in place along the folded pressed edge or add a trim, I put more rick rack on here to match the top. Now sew up and neaten the inseams. 

the almost-finished inseams

The rest of the shorts were very straightforward, I placed one leg inside the other so that the crotch seam was right sides together then stitched it twice a couple of millimetres apart before neatening.

I pressed over the top edge by 3.5cms then made two round-ended buttonholes for the ribbon to come through at the centre front. Next I top stitched close to the top fold, then sewed another row of stitching 3cms from the fold to create the elastic channel. I measured my elastic for a comfortable fit and added a short piece of dusky pink ribbon (which probably came off a gift bag or something) to each end of the elastic. I slotted this through the buttonholes and then secured it so that the elastic was just out of sight with only the ribbon showing through the button holes. Job done!

I’m pretty pleased with how my new pyjamas have turned out, I reckon I’ve already worn them more times than as a kaftan so that’s got to be a good thing, right? At least this pretty fabric isn’t languishing in the wardrobe waiting for a warm sunny holiday which is nowhere on the horizon any time soon! 

I’m a bit uncomfortable about sharing photos in my PJ’s but it’s in a good cause I guess.

Until next time, happy sewing

Sue