We asked you another question on @SewOver50 in October-which were your favourite go-to, never-fail, T-N-T T-shirt (tee shirt?) patterns and naturally you came up with a veeeeerrrry long list. I’ve trawled through them all and simply listed them here with a link (if I found one) for each so you can check them out for yourselves. As blogs go, it’s a bit of a dull one but you might it useful and maybe find your next new favourite pattern amongst these. Needless to say there are probably another one or two hundred more patterns which you think ought to be on this list!
I’m not recommending or endorsing any of these patterns personally, they have all been suggested by you, the enthusiastic followers.
The @sewover50 account is nothing if not helpful. When Cathy messaged Judith and Sandy recently she said she was ‘nearly 60, keen as mustard, but where do I start?’ Well she picked a very good place to start…hold on, that’s the Sound of Music but you know what I mean.
So Judith and Sandy turned it over to you and you really didn’t let us down (as if you ever would…) I’ve trawled through all your comments and collated as best I can all the wise and helpful advice you’ve contributed here. I’m not sure how coherent it will be but here goes…
First up is simply get to know your machine-assuming you have one [choosing a machine is a whole other post] if possible have a lesson on it at the shop you bought it from, definitely look through the manual and watch the DVD; familiarise yourself with threading it and winding a bobbin; learn to change the needle; practice sewing straight parallel lines before moving on to curves and pivoting corners. You could draw lines onto paper and practice that way (don’t use the needle on fabric after that though, it will probably spoil your fabric by being blunt) one contributor said she taught her child by using dot-to-dot puzzles from a book-one page at a time presumably, not the whole book under the needle…. Learning to manipulate and manoeuvre fabric is something which comes in time with practice, you’ll get there and rushing won’t actually help…take your time.
Get used to ‘driving’ your machine, can you adjust the speed manually? Sometimes the foot pedal has a switch you can change. Have it on a slower setting if that’s possible, otherwise it’s all down to your foot control which again will come with practice. Make sure you’re sitting comfortably right in front of the work area so you have a clear view of what you’re sewing, do you need an extra light? a daylight lamp or a daylight bulb in an old one can be really helpful. If you have the option to leave your machine out so you can use it at any time this will allow you to sew whenever you get a chance and not have to keep getting it out and putting it away.
Gradually compile yourself a ‘stitch bible’ of what your machine can do, use pieces of plain fabric (two layers) old sheets or a duvet cover are perfect for this, then use a coloured thread so that everything shows up clearly. Even if your machine can only sew straight and zigzag it’s still possible to make buttonholes and neaten seams. If there are other feet or attachments what are they for? They might be useful as you progress, the zip foot will probably be an essential although they are usually the most basic type unless you’re buying a high-end machine. Learning a few seam finishes without an overlocker will help you make longer-lasting garments too. You might like to make examples of gathers or darts and other seam types to create your own reference resource which you can always go back to. It might sound ‘old-school’ but whatever works for you is fine.
Ready to think about what to sew? Things like tote bags, aprons or cushion covers are an excellent place to begin because they will enable you to practice sewing plenty of straight lines with a few corners and/or curves. You can include patch pockets, possibly a zip, add trims, embellishment or applique for interest. Everything will help you to become more confident using your machine. Having a bash at making costumes for kids is another great way of getting more confident, you don’t have to be so precious about the materials you use, the fit might not be spot-on but you’ll have fun exploring new ideas. Or what about accessories or clothes for dolls or toys? Kids clothes can be lovely to make but they can also be very fiddly if you’re making something tiny with little armholes for example. Stick to little T-shirts and leggings to begin with perhaps.
This brings me onto another area: you’ll find masses of free patterns online especially for simple things like bags and aprons, sewing magazines always feature these types of project along with well-photographed step-by-step guides. As you progress there are also free patterns for all sorts of other things including garments, many pattern companies will have one or two free ones which, if you’re happy with it, will hopefully encourage you to buy from them too. The Mandy Boat tee by Tessuti is only 3 pattern pieces and really simple to construct for example. With regards to fabric choices it’s probably sensible to stick to a woven fabric like cotton poplin or lawn, or a stable knit like Ponte Roma to begin with, they don’t wiggle about when you’re cutting or sewing, chiffon and slippery satin will have to wait just a bit longer. Another contributor suggested choose a pattern with no more than 5 pieces to start with, what about pyjama shorts or an elasticated waist skirt for example? A really simple dirndl skirt doesn’t need a pattern at all, just gather widths of fabric onto a waistband.
So you’ve got the machine and you’ve got the pattern and now you need to sew it. You don’t need masses of equipment to start off with but I would suggest that you invest in decent quality pins, scissors and a tape measure for starters [I’m set in my ways here because I never use rotary cutters or weights]
Look out for classes locally-is there a fabric shop nearby? what about a college offering part-time courses? There are so many online tutorials that you could learn entirely via the internet and never pay a penny. There are also specific online courses which you can pay for, these are probably of a higher quality and consistency as a result, whichever you opt for you can access them at any time wherever you are in the world. Many indie pattern companies create sewalongs for their patterns so you can follow at your own pace, Closet Case and Tilly and the Buttons are just two for example. Others like Sew Essential, Stitch Sisters and GuthrieGhani (all in the UK) have created easy to follow tutorials, often for specific techniques and processes which can be really helpful. That’s all online but there are plenty of excellent books to help, a really good one is the Reader’s Digest Complete Guide to Sewing which has been in print for years but has such clear illustrations and instructions that it’s useful as ever. It covers SO many different techniques and examples of garment and fabric types, many that you’ve probably never even heard of! Seamwork magazine and Tilly’s book ‘Love at First Stitch’ were also suggested as excellent sources of clear, concise patterns with instructions, there will be many others which might be equally useful.
Other sources of support and advice (apart from SewOver50 obviously!) are Facebook groups-McCalls patterns have one which offers ‘massive global support for fellow sewists of all abilities’, there are area-specific ones too which you might prefer if they are more local. These forums could be especially helpful if you live miles from anyone else who sews. If quilting or patchwork are more what you want there many groups or guilds for these, I was also told about the American Sewing Guild and the Australian Sewing Guild.
If you like Instagram try using a specific hashtag for a pattern #lbpullover #wikstenhaori for example. You’ll get to see what it looks like on real people of all figure types which can be so helpful before you start. There are loads of SewOver50 ones too including #so50dresses, #so50tops or #so50visible for example. Or listening to a podcast like Love to Sewwhile you sew can be both entertaining and informative.
Another suggestion was to take a good look at the ready to wear clothes you would buy to see what the fabric is like, does it drape well or how has it been cut, or does the style even suit me? These days you can try things on and take sneaky photos in the changing rooms so that you’ve got a clearer idea when you’re planning your makes. It’s also a really good idea to make a ‘toile’ or ‘muslin’ so that you don’t spoil your ‘good’ fabric with errors that can’t be rectified, why not use a old duvet cover or sheets? It’s always a good idea to make a toile in a fabric which is similar to the fashion fabric you intend to use. This is because all fabrics behave differently with different properties which might not work appropriately. Make sure you read the pattern envelope carefully for fabric-type advice, or ask in the shop where you’re buying it; get a sample from online shops to avoid costly mistakes.
As you improve you could treat yourself to a complete sewing kit which include everything you need-pattern, fabric, trims, notions etc to make a project, or what about a subscription box?
What about trying refashioning? Take an old or unloved garment and reinvent it as something new. Or you could unpick a worn out garment to make a pattern from and recreate it in new fabric.
Don’t forget that sewing and fitting are two different things and there’s no quick and foolproof way to learn either, it just takes time. Don’t make the mistake of thinking that the size you buy in the shops is the size that you cut out-check your own measurements! Better to cut a little big and take it down than try to add extra (the voice of bitter experience!!) You will make mistakes but don’t beat yourself up over them, do a step at a time and don’t worry about step 7 or 11 or whatever until you get to it. By all means browse through the instructions before you start (especially before you cut anything out though!) to familiarise yourself, gather your favourite books or other information if you’re going to need clarification of a technique. Above all, enjoy the process, this is your time and you’re investing in yourself even if the project isn’t ultimately for you. Don’t be put off by those who finish projects quicker than you, they’ve probably been doing it for longer than you. Blanca of @Blakandblanca said “thoughtful making gets the best results” and I agree. Even those of us who have sewn for decades were beginners once and I certainly still make mistakes, to quote Einstein (approximately) “a person who never made a mistake never made anything” or something like that.
Thank you to every single person who contributed their thoughts and advice on the original post, I can’t possibly attribute each one I’ve used unfortunately but I hope everyone, especially nervous beginners, will find this post useful. If there’s anything else you’d like to add you can leave a comment at the end. Incidentally, I wrote a blog post a couple of years ago where I detailed a few starter thoughts when it comes to getting yourself ready preparing and cutting out your projects. I’m a stickler for accurate cutting because if that is correct to start with, and then something goes a bit wonky, you’ll have some idea if it’s your cutting or the pattern (and there’s been a lot of talk about accuracy or otherwise of pricy Indie patterns recently!)
I haven’t attempted to put too many links in here because you’re all over the world so what might be appropriate for the UK probably won’t be where you are. Hopefully you’ll get some generally helpful ideas as a springboard though.
My latest Minerva blog post is up for you to read now and it’s a jacket that nearly didn’t make it. I chose the fabric based on the image on screen but when it arrived both the background colour wasn’t what I expected and the design was larger than I thought it would be too. The lesson to learn from this is to order a swatch whenever possible to make sure the fabric is exactly as you expect or want.
That said, the quality of the loop-back jersey I used was absolutely lovely and it made up-eventually-into a really nice Jalie Charlie bomber jacket. I haven’t used Jalie before but I must say I was very impressed with the HUGE size range each pattern comes in, the quality of the instructions and illustrations (in both English and French) and the sizing is spot on.
The next problem I had was matching ribbing to the multi-coloured fabric and also finding a suitable open-ended zip. Eventually I found a gorgeous raspberry pink plain jersey from Sewisfaction instead of ribbing, and I got a zip from MacCulloch & Wallis in London.
Anyway, once I got everything together it all sewed up really well and I was pleased with how all the colours eventually came to form a unified whole. Subtle it isn’t so it definitely needs to be worn with plain garments but it’s a bit of fun and I know I’ll use the pattern again too.
As always, you can find the full rundown of my making experience over on the Minerva blog now, I hope you find it useful.
It’s been almost a month since I was loaned a Pfaff Coverlock 3.0 to try out so thought I would give you a ‘half-term report’ on how I’m getting on with it.
First thing to say is that it’s quite a beast! It’s a very substantial piece of machinery and so is fairly heavy as a result. That being said, this is normally the case with coverstitch machines because they are generally bigger than overlockers so the weight isn’t unusual. It does have a good-sized and comfortable carrying handle though.
Ok, so, the Coverlock 3.0 is a combination machine in that it is both an overlocker and a coverstitch machine. I’m sure you already know that an overlocker will trim and neaten raw edges and often sew the seam as well if you have 4 or 5 thread version. What you may not know is that a coverstitch machine doesn’t trim any edges, it will sew two or sometimes three rows of top-stitching on the outside of a garment whilst covering the edge of the fabric on the inside with loops of thread to ‘cover’ it. It has the advantage of being stretchy too. If you’re still not sure what I’m talking about have a look inside the hem or cuffs of a RTW jersey garment and you should see.
The first thing I had to do was not only rethread the machine as it didn’t arrive pre-threaded but I also needed to change it’s function from coverstitch to overlock. A major part of what I want to assess for you is how quick and straightforward it is to go between the functions. This is partly why I didn’t plunge in with a review as soon as I got it because I didn’t think it would be balanced or fair. Indeed, I will certainly write another review in due course after a decent amount of time and usage has occurred.
Because the machine was merely delivered to me without any demonstrations I’ve needed to use the instruction book a fair bit. If you have difficulty following written instructions and/or diagrams this may not be ideal for you but there is a (silent) DVD included with very clear animations of exactly what you need to do for each of the stitch variations possible. [I didn’t find this straightaway though so I muddled through with the booklet! I’ve also since found a few very helpful You Tube videos which were useful]
I’m not going to lie, it does take a bit of time to make the changes because you’ll need to remove and reinsert the needles to different positions as well as thread the machine in different ways depending on the function. This will eventually take me less time and I’ve added Post-it notes to the relevant pages in the book so that I don’t have to keep searching for the two I’ve favoured most. The machine is capable of up to 23 stitches using 2, 3, 4 or 5 threads and up to 3 needles. So far I’ve only used the 4-thread overlock and the coverstitch but I will endeavour to use more, including the flatlock, and report back.
I decided on making a hacked version of the Tilly and the Buttons Nora top which I’ve made a couple of times before as I didn’t want any nasty complications by attempting an unfamiliar pattern with a new piece of machinery!
The beautiful jersey with an amazing ‘tie-dye’ print is from Lamazi fabrics and was my choice as a July/August maker of the month [it could be you if you tag them on Instagram] I cut the sleeve to approximately 3/4 length and also cut two cuff pieces which were again approximate, initially about 20cms in length and then my wrist measurement at one end and my mid-forearm measurement at the other. I added a couple of centimetres for seam allowance to all sides.
I’d definitely say you need to do a bit of forward planning if you intend to use both the overlock and coverstitch functions on a project because of the swapping between the two. For example, on my Nora I needed to coverstitch just the cuffs and the hem, everything else could be sewn either directly using the 4-thread overlock or on my Quilt Ambition 2.0. I opted to sew the top together first and complete the hems at the end, in the usual way although there may be times when it’s better to hem first, we’ll see.
If you’re merely changing the thread colours it can be done in the same way as regular overlockers by snipping the threads near their spools, tying on the new colour and pulling each of them gently through, plus rethreading the eye of the needles. On one occasion when I altered the function I completely rethreaded but the stitch was much too loose-what had I done? It was all done correctly and yet it was way too loopy. I checked the manual for hints on troubleshooting but it didn’t make much difference. I was starting to pull my hair out when I realised I had threaded the machine without lifting the handle out of the way-the threads MUST go under it or they don’t sit in the tension discs! (Had I watched the helpful YouTube video first I would have known this…) Another thing I learnt the hard way was when the spool holder kept falling off the back of the machine and I was ready to chuck it out of the window I noticed it has to be slid sideways to click securely in position-doh!
The next two projects I made I didn’t use the coverstitch function as both the sweatshirts had cuffs and waistbands but I constructed much of them using the 4-thread overlock stitch. I used fabric provided to me by Minerva and they will appear on their blog in the new year. One of the patterns I used was the gorgeous Maxine sweatshirt given to me by it’s designer, Dhurata Davies. I’m going to make another one soon so I’ll write an individual blog on it then. [I got both tops out of 2.5m of fabric!]
For the final project I want to talk about here I took a different approach. It’s an Amy top by Brilliant Patterns and which I’ve made a couple of times before. I had a 1m remnant of loop-back cotton sweatshirting which I bought from Sew Me Something at a show for £8 and by shortening the sleeves very slightly, cutting the neckband in two parts and joining it I got a WHOLE sweatshirt out of the one metre!!
This time I set the machine up with a wide 2-needle coverstitch and I used my regular sewing machine to sew most of the seams. What I did at each stage of construction was to press the seams flat and top stitch them using the Coverlock. This meant that there would be two rows of top stitching on the outside and the raw edges were covered on the inside. This was generally OK although as I’ve yet to ‘get my eye in’ with lining up the foot against a seam or other visual marker a couple of them do waver more than I would usually like. It turns out there is a large removable flat bed included to increase the working area (it was tucked down inside the box and I’ve only just found it!!) this will support your work while you sew but it does take up a bit more room.
So to sum up (for now) I’ve been impressed with the quality of the stitches I’ve used so far on the Coverlock 3.0 and I will definitely look for opportunities to try others whilst I have it. I’ve yet to be convinced about swapping between the stitch-types but obviously, as I get more familiar with it, I should get faster at changing between them. There are few processes which have to be gone through to make the changes but I’ll probably work out an order or procedure to follow to speed it up. If you are short of space a combination machine might be useful, they aren’t cheap though. You’ll almost certainly use the overlocker stitches more of the time so possibly changing occasionally to coverstitch will be sufficient. I would definitely say you should have a thorough demonstration of the machine so that you know what is involved and what it is capable of. Unlike washer/driers which don’t do either job very well this machine does both functions to a very high standard.
Thank you to Pfaff for giving me the opportunity to try out their machine and if you have any questions about my experience so far then do ask.
How often do you alter or adapt a pattern when you’re making it? By that I don’t mean the usual things like adjusting the fit to suit your height or bust measurement, I mean really alter it significantly with things like changing the sleeves or completely changing the length.
I’ve always enjoyed doing exactly this because it’s a way of making a garment completely original and all your own even if loads of other dressmakers are sewing and sharing their versions of a particular pattern. These days this process even has it’s own name-pattern hacking. You can read a couple of my previous blog posts where I’ve hacked patterns to give you some other ideas, here and here.
When I was invited by The Fold Line to take part in the Simplicity Patterns/Eve Appeal campaign this year I knew it would be something I’d enjoy and could really get my teeth into. There are a range of patterns you can choose from and for every one sold Simplicity will make a donation to the Eve Appeal. I picked a blouse pattern #8658 to use because I could see its potential for changes, not least because it’s shown in stripes on the envelope and I knew there was fun to be had playing with the directions of them. I chose a really lovely blue striped shirting with a little bit of stretch generously provided by Minerva and while I waited for it to arrive I did some sketching of ideas. The raglan sleeve is in two parts running down the top of the arm to the wrist so my first idea was to have the stripes running in different directions, which led on to having the lower, bell-shaped part of the sleeve cut on the bias.
I thought the back needed to be a bit more interesting than just a centre back seam with a button and loop closure so I altered it to include buttons and buttonholes. The blouse is over-the-head anyway so I don’t need to be able to open the buttons to get it on. The neckline is finished with bias binding but why put it on the inside when you can make a feature of it on the outside?
Strangely I never saw it as staying just a blouse, it was always going to become a dress but how to do that? I like long floaty skirts so I sketched out quite a few variations of gathered, pleated and flounced skirts, all with pockets in the seams somewhere. I had decided that the bodice should be higher at the front than the back which obviously would affect the skirt levels but I eventually left that decision until the bodice was made up and I could see it more clearly on the stand.
I thought I’d do some of my initial adaptations and make it up as a blouse first to check the fit. The back is easy to change because it already has a CB seam so I merely added 5cms to the edge to allow for a grown-on button-stand. The original stitching line will remain as the CB and that is where the buttons and buttonholes will get positioned. I traced all the pattern pieces I needed onto spot-and-cross paper although the envelope does include a large sheet of squared tissue paper for you to use to make your own changes if you don’t have spot-and-cross. [You could use cheap wide greaseproof paper if you have it, I used to use broadsheet newspaper taped together when I was a student but that’s getting harder to find!]
Having traced the two parts of the sleeve once I then retraced them again (I didn’t want to cut up the first ones, I may want the sleeve full-length at some point) just the top parts to a length a bit above my elbow, around bicep level, not forgetting to add seam allowance to the new lower edge. Next I pinned the FULL-LENGTH sleeve pieces together along the stitching lines vertically so that I could trace off a new single piece for the lower sleeve. As well as the regular straight grain I added a bias grainline too because I’d be using that with the stripes. You could add extra fullness to this part by cutting and spreadingif you wish, it would make a very voluminous bell-shaped sleeve.
I cut a size ‘medium’ according to both my body measurements and by referring to the finished garment measurements printed on the pattern. Using some lovely printed poplin from Stitch and Knit, a new fabric and yarn shop near me, I made up the blouse. Part of my plan on the dress was to highlight the seaming with topstitching so I did this on the blouse too although I used a fun ‘circles’ stitch in a contrast colour which echoed the design on the fabric. I didn’t cut the lower sleeve on the bias though because it wouldn’t make any obvious difference to the look of the print. I tried out my idea of French binding on the outside of the neck edge and that looked good too.
Overall I was very happy with the fit of the medium so I didn’t need to make any changes to sizing. This meant I could retrace the front and back bodices to my chosen length which was approximately Empire-line or a few centimetres below my under-bust line. To decide where this was first I pinned the front and back parts together at the side seam on the stitching line and then attached it all to the stand. You can then see more clearly where you might want to draw the horizontal style lines from front to back, especially if you want a sloping line. With these lines drawn on you can trace off the new, shorter parts and check them on the stand and on yourself too. This is important because I thought I’d made the line a little too high so I added some more length to the bottom, 5cms in all I think.
This might all seem like a lot of tracing off and you could just indicate on the pieces where your various cutting lines are (or wing it!) then transfer your markings direct to the fabric. As I planned to rotate the back so that the stripes were horizontal I wanted accurate pattern pieces.
After cutting the bodice section in striped fabric I first reinforced the buttonstands with iron-on interfacing up to the fold line. Next I attached the appropriate sleeve parts and top stitched the seams, then joined the shoulder seams so that I could bind the neckline. I’d cut a long bias strip of fabric 5cms wide which I folded lengthwise wrong sides together and pressed to get a crisp edge. Next place the bias on the WRONG SIDE of the fabric with its folded edges to the cut neck edge, this is because you will flip the binding to the outside eventually where it will be visible. Once you have pinned the binding in place you will know exactly how long it needs to be so then you’ll need to neaten the ends by turning them RS together and stitching. Fold them back out and pin in place, it should be level with edges of the buttonstands. Stitch the binding in place using a 1cm seam allowance, trim and snip as required then flip it to the right side and topstitch in position around the neck. The photos of the blouse version should make this clearer.
You can sew the buttonholes at this stage too if you like or leave them until the end. I’d bought the most gorgeous metal buttons from Duttons for Buttons in Harrogate, Yorkshire, the only problem was that the loop on the reverse of them isn’t central which is why the top button looks a bit off kilter, it had to be sewn like that so that the top band remained level.
I attached the lower bias-cut sleeve parts next, sewed up the side seams and elasticated the cuffs., as per the instructions (yes I did use them occasionally!)
I still couldn’t decide what to do with the skirt so I tried a couple of ideas out with fabric scraps to mock-up various looks. The shirting is quite fine so it gathers really nicely without a lot of bulk, if I’d used pleats I would have had the complicated task of working out the pattern pieces to fit accurately onto a curved and dipping lower bodice edge and that was a challenge too far-especially as the stripes would have had to match too!
Eventually I settled on a bit of a technical cop-out by using two simple rectangles which gathered onto the lower edge of the bodice instead of making shaped skirt pieces, apart from the central areas where they would be flat. This meant that the hem followed the same line as the bodice, higher at the front than the back, but the side seams will pitch slightly forwards as a result. It isn’t the end of the world but rather that than make the dress too complicated for you to try copying for yourself. And of course I put pockets into the side seams, with the stripes running on the opposite grain. I have a cardboard template for the pockets which I made ages ago and I just draw around it directly onto the fabric as required. (Basically I drew around my hand onto card, plus a bit of extra space, plus a seam allowance and a straight edge on one side to sew to seams)
One final twist I added at the end was to insert elastic around the hem to give it an unusual silhouette. I turned up the hem 5mm and pressed it in position then I pressed it up again by 2.5cms. I topstitched top and bottom leaving a small gap through which I inserted 2cm wide elastic about 1 metre long. The casing could double as the hem if I choose to take the elastic out in the future.
Mr Y and I went to Kew Gardens on a beautiful day in September and I took the opportunity to pop into the ‘Ladies’ and change into my dress for a photoshoot with more interesting backdrops than my back garden!
I hope this has given you a few ideas that you could try for yourself, this pattern is an ideal blank canvas and it has a few suggestions included which you could try first of all. There are so many possibilities you could attempt, and some of the other bloggers involved may have used this pattern too so it will be interesting to compare their own takes on it. I wanted to mess about with stripe direction, this would also work if your fabric has a strong one-way design. You could highlight the seams using piping, ribbon or other trims, what about an exposed zip down the back? you could leave the seam on the top of the sleeves open and secure it at intervals with little buttons? Obviously you don’t have to turn it into a dress but you could play with the length or put straight horizontal seams across, maybe at different levels to each other? It could potentially be a scrap-buster too…so many possibilities! If you’re going to add style lines which aren’t already there don’t forget to add seam allowance to the edges of them, include a notch or two if necessary so that you know which pieces you’re matching together.
You might have tried and trusted patterns at home which would be ideal springboards to new ideas, or by buying this pattern you will be helping raise valuable funds for research and support of those suffering with female gynaecological cancers.
Whatever you decide to try, enjoy the exploring the possibilities, don’t use expensive fabric to start with if you’re not sure you’ll like the result, look in your workbox to see what trims and embellishments you could use, contrast top stitching is one of my favourite, and most simple, ways of making something unique. There’s a whole series of other bloggers who will be taking part in this challenge in the coming weeks and months so why not take a look at what winner of the Great British Sewing Bee 2018, and pattern-hacking queen, Juliet has done for starters, or Abi of @whatabimakes and Rachel @thefoldline have added their spin to patterns in the range now too.
You can find further information about the patterns used here too
When our Great Leader Judith responded to the call by the Sewcialists account on Instagram twelve months ago to set up a new account specifically for sewers over 50 little did we imagine that it would become what it is now. With over thirteen and a half thousand followers, and still increasing all the time, it’s a hub primarily for sewers, dressmakers, sewists, crafters, call them what you will, who are mostly, but not exclusively, over the age of 50 to share what they’ve made. The #sewover50 hashtag has now been used over 31K times! We have made it a supportive, encouraging and educational place where people can feel safe and happy to post their photos and know that there will be other like-minded people who have the same shared interest in sewing looking at them. Our life experiences will have many parallels, dealing with things like menopause and our bodies changing into ones we no longer recognise, caring for elderly parents perhaps, looking after grandchildren or worrying about older offspring trying to make their way in the world. Some of us might be in a ’sweet spot’ before some of these events arrive but whatever brings us to #sewover50 we all want to make the most of our sewing time.
I said ‘mostly over the age of 50’ because there are many younger people following too, they may not share as many images but we know from comments and feedback that they enjoy seeing and being inspired by what other SewOver50ers post.
Rather than simply write another ‘what have we done, what have we achieved’ post I thought I’d turn the questions over to others who have been a part of Sew Over 50 since the early days. With over 13.5k thousand members, and more than 31,000 uses of the hashtag, it was almost impossible to choose from so many amazing people but we narrowed it down to a tiny cross-section and they all generously shared with me what their own feelings about Sew Over 50 are, what it means to them and why they think it’s important.
I started by asking them how @SewOver50 had come to their attention, and I’ve used their own words as often as possible.
Several of us were already following Judith and enjoyed her sewing and interacting with her so it was a simple step to move sideways to the new account from August 18th. Others came to it via the Sewcialists account and some noticed the #sewover50 hashtag starting to appear in accounts of other makers that they followed. It mushroomed at lightening speed. One of the most touching responses I received though was from Tina @bricolagedk1 who told me a very different reason for her joining in. Living in Denmark she was struggling to adjust to a new and altered body-shape after a mastectomy, RTW clothing just wasn’t right any more so she wanted to start sewing her own again after many years but found a lack of patterns and information available. She contacted Judith directly and, when Judith shared the question with everyone this was the response. I’ll let her explain in her own words,
“You posted my request and I got an amazing response. People gave me drafting tips, and told me of helpful sewing tools for hurting hands and weak arms. A couple of post mastectomy sewers also contacted me. Others from the SO50 community gifted me patterns, and translated patterns for me from languages I didn’t understand. They told me of patternmaking books with drafting tips for asymmetric sewing. But most of all, everyone was extremely supportive, and in less than a year I have gone from feeling so alone and insecure about how to sew for my changed body, to being part of a very supportive, helpful and inclusive community.”
Marianne @foxglovesandthimbles also found us via Sewcialists but she makes an interesting observation about what happened for a while after joining. Initially she wasn’t sure about becoming part of a sub-community because she’s very happy in her own skin but she gave us the benefit of the doubt. However, “during the first weeks of SO50 I struggled with the fact that, due to the call for inclusion, my feed ended up less diverse. Instagram’s algorithm steered me away from my younger sewing friends and all I saw was Sew Over 50 posts. Just as I was about to quit the group it became obvious that using the hashtag had helped a lot of sewists in finding their tribe and gaining confidence. That’s what convinced me to stay and fully support SO50!” The darned algorithm has a lot to answer for and I wonder how many others didn’t stick around?
When I asked what everyone enjoyed about being a part of SO50 I got many and varied answers. Janet @sewdalriada felt that “since participating in SO50 and making new friends my Instagram feed is brighter and livelier and I look forward to the imaginative, creative and often humorous posts popping up each day.” Kate @stitchmeayear loves that we “champion ordinary sewers….real people being proud of what they’ve made which is great.” Words like positivity and humour cropped up often, the overwhelming experience though is supportive, knowledgeable and inspirational. Carolyn @diaryofasewingfanatic says she believes “SO50 came at a great time when sewists were voicing their displeasure at not being seen. This account makes it possible for older sewists to be seen and heard from now on.”
Everyone I spoke to felt that because we are all, for the most part at least, of similar ages and shared life experiences, that we ‘got’ each other, we feel included which was a very positive thing. Kellie @gigi_made_it puts it beautifully, “you have managed to infuse a sense that our lives as creatives matter, that there is value in what we do. Our group exists to support, inform, inspire, encourage and lift each other up, and I’m so proud to be a part of it.”
I was interested to know about everyone’s sewing ‘career’ and many are like me, a lifetime of sewing and dressmaking, often with a break for career and/or children. Carrie @endlessdznsbycarrie told me she was a long-time sewer but “life pulled her away for a few years. When I returned to sewing in 2007 I took quite a few classes and here I am now-loving it even more!” Raquel @raquel_sewing_knitting_in_asia had a different reason to start, “my sister Bea taught me to sew when I was 16 years old and having boyfriend trouble. She knew that teaching me to sew would be a creative outlet I could use in my life then.” Nicky, however, is a relative newbie “my daughters bought me a beginners dressmaking course two years ago and I have not looked back-I absolutely love it! I am a slow sewer and growing in confidence.” Janet had been a avid dressmaker until the demands of work and family life got in the way but she rediscovered her love of sewing “after a gap of many years, following my husband’s life changing accident. As his primary carer sewing has proved therapeutic by providing a creative outlet and temporary escape and has been a great confidence booster.” Lisa @mabelthemannequin has an equally difficult story when, after a lot of years sewing mostly for others she was diagnosed last year with a systemic illness which robbed her of her sight for a few months, “it was during this time that my husband read an article to me from the internet about Me Made May and we decided it was something for me to aim for when my sight returned. I started sewing for myself again and am absolutely loving it! I am using lots of skills that I had forgotten I had and am far more adventurous in both the things I want to make and wear.”
We all look at SO50 for inspiration so I wondered if anyone used it specifically as a resource for other information? Blanca @blakandblanca says she “asks about patterns, techniques and sources often as a way to support suppliers or businesses that are independent and are promoted by the sewing community.” Janet often saves posts by other members, for example where they’ve shared tips on pattern adjustments. Mary @marythimble says members “are a constant source of inspiration to me, after all, they’re real people! They are all so ready with tips, advice and knowledge, I have learnt so much from so many people. I would never have thought I could make my own jeans, coats or undies before.” Marianne lives in the Netherlands which, like the UK, isn’t often troubled with very hot weather but recently she called upon her sewing friends in warmer climates for advice in suggesting stylish hot weather patterns! Raquel and Tina told me that they had been inspired to try new techniques such as embroidery, fabric dyeing, use vintage patterns and work with sheer fabrics after seeing others do the same.
Interacting with one another seemed to be the main reason many of our members contribute to the account, the feeling of being part of a group. For Mary she “no longer feels that sewing is an isolating hobby. It’s no longer weird to prefer to sew on a Friday night than go out partying. I am understood and accepted for being slightly eccentric!” Carolyn follows several other sewing related groups including #sewincolour #pocwhosews #plussizesewing and #curvysewingcollective. By including these along with the #sewover50 hashtag she finds a much more diverse group of people through her posts. [Incidentally, did you realise that you can write all the hashtags you like to use in ‘notes’ on your phone so that you can then simply copy and paste them into your posts rather than try and remember, and laboriously type, them all out every time. It’s saved in favourites on the account if you want more info]
The original reason the account started in the first place was what we perceived as lack of visibility for older sewers so I asked everyone if they felt it as important for us to be ‘campaigning’ still. There was an overwhelming ‘yes!’ Carolyn puts it so eloquently when she told me “while the sewing community has experienced and continues to experience growing pains while attempting to include ALL sewists under the tent, it’s doing better a far better job than the the knitting community. While change has been incremental so far, you can tell everyone has heard the conversations and is trying hard to apply them. And we all know change takes time…nothing happens overnight. The thing is to ensure that the changes aren’t temporary but they’re binding and will be there going forward.”
Lisa also made a good point when she said “I am 50 but I’m not ready for my shroud just yet! I want to wear fashionable clothes and I want to decide if it is appropriate for me. Seeing models my age, shape and size is important whatever age you are. Things are improving but we must continue.”
Marianne takes a different stance because, for her, “age representation is a non-issue. When I first started sewing I never felt like those artist’s impressions on pattern envelopes, or stick thin Parisian ladies with their hats and gloves, were very useful when it came to judging the bones of a pattern. Line drawings most definitely were! They are still my main source of information and I hardly look at the models.” Tina made the point that she often doesn’t buy a pattern “when the girl modelling them is 30 years younger than me, because I cannot relate my body to the way her body is, and because my body bits are not placed in the same places as hers. So I guess if it looks good on her it will look horrible on my body where 50 years of gravity is a fact!” Blanca reckons it is “so important for people of all ages and sizes to see themselves as valued by the businesses they support. There is certainly a change going on in the pattern world.”
Many of us feel we have formed real bonds with people across the world although admittedly not many of us have been able to meet up in real life but @suestoney covered quite a lot of ground in the UK during her visit earlier in the year, meeting up with several fellow SewOver50ers including Janet and Judith. If you ever meet up with others, especially if it’s in some far-from-home location, make sure to tag us so we can share! We really are a global account and we love to reflect that in our posts. Katrin @sagner_by_katrin feels that although she isn’t aware of other sewers near her in Sweden she says that we’re all “a friendly bunch so I don’t hesitate if I want to ask someone something. Mostly I really enjoyed being inspired by everybody and maybe inspire others too.”
I was interested to hear if anyone felt their own style had changed, or was evolving as a result of being part of SO50. All of us agree that we’re very inspired by what others post and it influences what patterns we might choose to buy and make. I love that Carrie says “so many in the #sewover50 community have inspired me to take my ‘I make what I like-I wear what I like’ creations up a few notches! I no longer consider colours or seasons or even fabrics when creating, I just have fun with it!” Also Tina makes the point that by seeing what looks good on 50+ bodies inspires her to try out new patterns and fabrics.
Carolyn knows her own style pretty well but she’s always interested to see the different adaptations of patterns that people create by using colours, prints and patterns that she wouldn’t necessarily have thought of. Janet has pushed her style boundaries “for example I’ve made dungarees and shorts, both of which I feel comfortable wearing.” Mary acknowledges “there have been several times I’ve made things based on seeing it on someone else, I always try to acknowledge them as my inspiration when I do.” Although she’s yet to embrace the animal print trend!
Our challenges are something which seem to have divided opinion, some embraced them enthusiastically and others not so much. The initial one sparked a huge amount of interest because it really drew attention to just how few patterns featured an older model, the flatlay challenge was definitely for fun and there were a lot of entries, which may have been because we had so many prizes! There is currently an ongoing challenge to use or reinvent a vintage or vintage-inspired pattern to create a brand new garment. It might require a little more thinking outside the box because the finished garment doesn’t have to be an exact replica of a vintage garment, merely use the pattern as a springboard to creativity. Going forward we want to host more challenges which encourage and inspire everyone, whether they take part or not, so that it makes us really think more about our sewing. We’ve go our thinking caps on but if you have a good idea you’d care to share then do let us know. Blanca made the point that the challenges gave her some guidelines to follow which are what she needs to get properly inspired. “Not so easy for me to sit down and decide what to do with a blank slate. Every challenge was exciting to follow with group members bringing on their fun and beautiful creations. Nothing like checking in on new posts!”
It’s almost impossible to sum up briefly what @sewover50 has become, and what it means to everyone who participates. It means different things to different people but the main things I’ve drawn from everyone’s responses is that above all else it’s inspiring and supportive. For some it has enabled them to come to terms with serious health issues for themselves or loved ones, it has given them a breathing space away from difficulties. Creativity is a form of mindfulness because while you’re sewing for pleasure there’s time to consider what you’re doing, often to the exclusion of everything else. My own feelings are perhaps more complex because I often undertake sewing, mainly alterations, for others and I can’t honestly find much that’s mindful in turning up someone’s trouser hems! However, I then try to ‘reward’ myself with sewing something just for me. I try to ‘give back’ to the sewing community in the form of using my years of experience by helping test patterns for Indie makers. We all agree that though we want to see similar people to ourselves sewing and making, we also want a balance, we want to share and be inspired by our younger sewing friends. In the UK it became something of a dirty word to study ‘textiles’ and the art of clothes making had virtually died out amongst the younger generation. Thankfully, that seems to be in reverse now, partly because of programmes like the Great British Sewing Bee (and its overseas counterparts) because young women in particular, and some young men too, are embracing the creativity and satisfaction we can get from making our own clothes.
At the end of our (Ok, not mine, the technology gremlins showed up with impeccable timing!) recent appearance on That Sewing Blab, the final question Dawn asked to Judith and Sandy was, “if (still waiting…) the big pattern companies come knocking to ask how we would like to be presented in the catalogues and on pattern envelopes, what would we say to them?” Well we would certainly say that putting all the same old pictures from the last year in the front of the catalogue does not constitute any change, it just means that the same photos are not hidden in the catalogue so much. Sandy did some research recently to see if there had been an appreciable change and she worked out that from the hundreds of images she trawled through in the big catalogues that just 1% featured anyone who appeared to be remotely 45+. This is much worse than any other group with the possible exception of people with disabilities. We know change takes time but really?? There’s no excuse in this day and age not to have a good cross-section of ages, sizes, ethnicities, gender/non-binary, everyone. Many of us choose to make our own clothes because we can’t or don’t want to conform to ‘the norm’, there shouldn’t be the same constraints as there are in the RTW fashion industry. #sewover50 is trying to help speed up part of the change.
I am deeply indebted to everyone who so generously sent me their personal stories, and I am extremely grateful that they have allowed me to share them here with you. Without them, and all of you, there would be no point to the account existing. It could have withered on the vine right back at the beginning, or fizzled out after just a few months, but it didn’t, it’s still going strong. This is in no small measure to the time and dedication that Judith and Sandy spend day in, day out, responding and reacting to every post that shares the hashtag. Given that there is no reward for doing so that’s no mean feat, some companies have paid staff to do exactly that and they don’t do it half so well!
If you still haven’t read any of my original posts that kick started all of this then you can read a couple of them here, and here .
I would especially like to thank these wonderful women for their honesty, their kind words and their unending support and enthusiasm, I haven’t been able to use even a fraction of what they shared with me but without them, all of you, Judith, Sandy and I would have nothing to do…other than have more time to sew I suppose…
Maybe you’ve recently found SewOver50, perhaps you’ve just returned to sewing and dressmaking or it’s new hobby for you. Whatever your situation (and you absolutely DON’T have to be over 50 to follow us) you can rest assured that there will lots of people only too willing to offer you help, assistance, friendly supportive comments and inspiration.
I think Mary sums up many (but not all!) of us with her remark, “the not-so-secret-society-of-aging-sewers. I may look half a hundred, but in my head I’m being the rebellious teenage I never was!”
Trend are fashion-forward indie pattern company based in London and I’ve already used their Asymmetric Dress pattern twice (and reviewed it here) I even wore the first one for the Love Sewing magazine Sew Over 50 photo shoot too because I felt it was such a striking but wearable dress that it deserved to be seen in a national sewing publication!
The next Trend pattern I’ve decided to tackle is the Frilled Hem Top TPC5 and it’s another goody as far as I’m concerned. As well as the ruffle detail it features some interesting diagonal seam lines (there’s no side seam) The degree of difficulty is described as moderate and I’d agree with that because although the techniques used aren’t difficult you need to keep your wits about you to ensure that you’re attaching the pieces to the right seams, it could be easy to lose sight of which way up they are because the usual ‘landmarks’ like armholes or necklines aren’t so obvious. There are photographs as well as written instructions, which are fairly clear, at the end of the day it’s a simple top and so long as the ruffle goes in first attached to the right pieces then adding the back yoke and sleeves is straightforward. I hadn’t got a suitable zip, I’d thought about using an exposed metal zip but the one I had in my stash was too chunky for the weight of the fabric so I opted for a simple button and hand sewn loop closure instead.
My fabric was a very thin cotton I’d picked up from a swap sometime ago-I couldn’t really say what it is as it isn’t soft like lawn, or sheer like voile, it’s slightly more crisp like poplin but less weighty. Whatever, it’s worked just fine for this and it didn’t cost me anything!
As I was making the top at this year’s Stitchroom Sewcial I was fortunate to be able to use the industrial rolled hem machine to finish the edge of the ruffle, it’s super-quick and neat and took me about 30 seconds to hem the whole piece instead of my usual pin-hem finish which would take at least half an hour!
As I didn’t have much fabric, plus I wanted to wear it as a summer top, I cut the sleeves down to short length. I was a little concerned that they looked like they may be a bit snug on my not-very-slim arms, the bicep measurement seemed to be ok but the crown looked narrow. I decided to go ahead and insert the sleeves and actually they are just fine as you can see from the photos. As there is no underarm seam to match the sleeve to it’s vital that the shoulder/sleeve head notches are marked or you’ll struggle to insert them properly. I’ve made a straight-from-the-packet size 14 again and the fit is spot on for me with no alterations, it’s a good fit across the shoulders and upper chest area and then flares out over the hips.
There are two points in the instructions which are useful and important to follow. The first is very simple, it tells you to ’sink stitch’ (that’s what it always was until ’stitch in the ditch’ became a thing) through the shoulder seams to hold the neck facings securely in position, this is both quicker and more effective than hand stitching them down I always think. The second point is that you can’t sew the whole hem up all in one go, you’ll need to sew the centre front section, stop, move the frill out of the way and then recommence the rest of the hem. If you don’t you’ll just sew over the frill which will look terrible.
So that’s the Frilled Hem Top, it should probably take around half to a whole day to make, it took me longer because I was nattering at the Sewcial quite a lot, and then I made a super-quick Mandy Boat T-shirt using the industrial coverlock machines in between too.
The TPC5 takes a little under 2 metres of fabric, probably less if you’re making it sleeveless or short sleeves. The size range isn’t extensive, 6-16 UK sizes, and they aren’t the cheapest but I’ve been very happy with the two I have and I’ll definitely make some more variations of this particular pattern. You could create some really interesting looks by using contrasting fabrics or colours, or leave out the frill completely to show off the unusual seam lines?
Trend have a wide range of patterns now, which don’t necessarily appeal to everyone but I think they are well worth a look at because of their unusual styling and details. They may look scarily fashion-forward but if you want something which is less predictable and run-of-the-mill in a sea of ‘meh’ patterns then, in my unsolicited opinion, they are a good bet. They often have a flash discount offer too so keep your eyes peeled for them!
I haven’t written a Simple Sew blog post for a few months but now that Sam Sterken has taken over with the organisation whilst Gabby is having her maternity leave we’re up and running again.
I had a bit of an idea in my head of what I’d like to do using the Zoe pattern which I already had so I chose some medium-weight enzyme washed linen in dark turquoise generously provided for us once again by Doughty’s Fabrics. I was really pleased with it when it arrived as it wasn’t too droopy but not over-firm either. Incidentally, it’s been terrible to photograph accurately, the final outdoor photos are definitely the closest to the real thing [to see how I altered the Zoe neckline so it wasn’t so wide have a look at my previous blog post in early 2018)
I drew a few sketches of ideas which all involved using the top half of the Zoe-initially I was going to extend the sleeves with wide pleated frills and keep the dress straight but I went off that idea as I felt the fabric was too firm for how I wanted it, I thought it would definitely work well with a peg-top skirt instead however. I wanted a shape that wasn’t too voluminous at the hem and by using an inverted A-line shape I could add pleats at the top but keep the hemline slimmer.
I tried on one of my existing Zoes (I’ve made 3) so I could assess what length I wanted the top section, and took an arbitrary measurement of 34cms from the centre of the front neckline to where I wanted the waist, which is slightly higher than my natural waistline. As the Zoe has centre front and back seams I then measured from the top edge down to the point where I wanted the waist seam and drew a line at a right angle on the pattern across from that point. I took that line across to the side seam but at the point where the line met the side seam I made it a right angle, which creates a very slight curve on the line. Because the back neck sits a little higher than the front I matched the side seams to one another first and created a similar line across to meet the centre back seam. [It’s important that these lines are at a right angle where they meet at the side seams because otherwise you would have a slight V shape rather than a smooth line from front to back]
I already have a skirt pattern that I’d drafted last year for a similar peg-top shape, I’d used it gathered though and I wanted pleats on the new dress. Initially I attempted to work out how to get 3 even sized pleats by folding and refolding the paper but I couldn’t quite get it. In the end I decided to cut the pieces in fabric as they were-with a slight modification for the front skirt as that piece was quite different-and then I’d work out the pleats once I was ready to attach the bodice and skirt together.
I cut all the bodice/sleeve/neck facings and assembled the bodice first. I’ve found that it’s easier to sew up the shoulders and attach the neck facings as described in the instructions but then attach the sleeves with the bodice open flat before sewing the side seams rather than in the round. The photos should help make this method quite clear. I added rows of contrast triple straight stitch to various seams as I went including around the neck [I used the quilting guide which came with my machine to do this accurately]
Next I cut the front and back skirts from the remaining fabric, plus I also cut two pairs of pockets for the side seams using the cardboard template I’ve made. [Just choose a pocket pattern that suits the size and shape that you mostly use to go in side seams and then make a cardboard version, mark the grainline and then all you need to do in future is place it on your fabric and draw around it with a pencil or chalk, it saves a paper piece getting scrappier and scrappier with constant use.]
I made up the front and back skirt sections, adding the pockets to the side seams, then top stitched the CF seams as before, I didn’t top stitch the CB seam at this stage as I wanted to be able to sew in a continuous line with no breaks and I couldn’t achieve this until the hem was turned up too. Incidentally, as many of the seams were going to be pressed open inside the dress I overlocked the edges of most of them first then sewed the seam and pressed open.
Next I pinned on the skirt starting by matching the centre front, back and side seams. Because I had no other markings now I played around with different positions for the pleats until I happy with how they looked. This will vary according to what size you’ve cut the waist but for mine I settled on 10cms each side of the CF seam for the first pleat and then the second and third pleats were a further 4 cms away from the previous one. I checked all the measurements to ensure that they were each symmetrical and well-balanced before I sewed it all together, overlocked to neaten and added another row of top stitching to the waist.
This just left the hem length to check, I had opted for quite a long skirt length because I wanted the dress to be a fairly loose throw-on shape but not too baggy or undefined. I was happy with the length I’d plumped for so I used the triple straight stitch once again around the bottom and then down the CB seam, creating an angled line to define the facing which finished the slit opening.
I’m not always super-happy with everything I make (and in truth I’ve positioned the pockets a little bit low in this dress) but I can’t wait to wear this dress during the summer! I’ve only ever worn my previous Zoes with long-sleeved tops layered underneath in chilly weather so it’s a bit of a revelation to realise that the sleeves are the perfect length for a summer dress. I think the skirt shape is more interesting than just a gathered dirndl and the lime-green contrast topstitching is a bit of fun. The linen is a great weight for this too, it will be crumply but that’s part of the charm of linen fabric…I think I may have to make more of this frock!
The Sewing Revival are a small PDF pattern company based in New Zealand and I first discovered them through the first Sew Over 50 challenge at the beginning of the year. Since then I’ve made 4 (!) versions of their Heron dress and top, 2 dresses and a top for me and one top for my SiL for her birthday. I really like the simple but stylish aesthetic, coupled with the fact they can be quick to make which is a real ‘palette-cleanser’ if you’ve been doing some more complex projects beforehand.
The Bellbird is basically a T-shaped top with dolman sleeves but it’s USP is the wide gathered cuffs on the short sleeves. You can choose between a scoop or a V neck, I’ve made the V.
It probably works best in a fabric with a bit of drape like crepe-de-chine, a soft viscose or fine linen, I used (eventually after a lot of going through the stash to find the right quantity!) a sheer polyester chiffon of unknown provenance. It wasn’t quite enough to cut the front and the back both on folds so the front went on the fold and the back went on the selvedges so there’s a seam. Also, because of the sheer nature of the fabric I opted not to use the neck facings but I made some bias binding to finish off the neck instead.
It’s very important to stabilise the neck edge as soon as possible so that it doesn’t stretch out of shape. I ran a row of stay stitches 5mm from the neck edge front and back-you could also use stay-tape or iron-on stabiliser if it isn’t going to show. Next I joined the shoulders using French seams as the fabric is so sheer, it gives a better quality of finish and makes the seams a little bit stronger too as they are sewn twice in this method. you could use a tiny flat-felled seam here if you wish but I think that’s taking things a bit far for a polyester chiffon!
I decided to use the French binding method which involves cutting bias strips which are at least twice as wide as you need plus seam allowances, making sure it was plenty long enough to go right around the neck with some extra to spare. Join the strips in the usual way if you need to and press the seams open before you fold the strip in half lengthways and press all along the folded edge so that you have a long continuous strip of folded bias binding. Next, I wanted the binding to show on the right side of the fabric so this means you need to pin the cut edges of the binding together to the neck edge ON THE WRONG SIDE. When you sew it on around the neck edge the binding will flip to the OUTSIDE thus enclosing the raw edges inside itself. The photo above shows where I’ve sewn the bias on, I’ve under-stitched it on the inside and then flipped it to the outside and now it’s pinned down. Finally I topstitched it down on the outside. Overall I’m happy with how this turned out because the chiffon is very very wiggly and you’ll need to be a bit patient with yourself if it’s the first time you’ve attempted a fabric like this. Take each step slowly and tack or baste as you go if you’re in any doubt about your ability to sew just using pins.
Once the neck is sewn it’s a case of joining the underarm seams, also using French seams, and then making the casing to enclose the elastic. This is the ‘detail’ of the Bellbird top so try and use wide elastic and don’t make it too tight on your arms as this is gives the best effect. Finally, finish off by making the hem.
I know chiffon isn’t exactly an ‘every day’ fabric but I’ve worn this top twice already now-albeit with a cami underneath as it’s sheer-and it’s very comfy. It droops backwards off my shoulders a little but I find that’s often the case with V necks on me when the garment is loose-fitting. I might try the scoop neck next time to see how that is. It’s designed to be a fairly close fit over the hips, not loose and floaty, I made a size large and it’s perfect for me. The Sewing Revival patterns come in selection of size brackets and you choose the set closest to you personal measurements. If you fall between sizes I think I’d advise going for the size nearest your bust measurement and altering the hip to suit.
Have you tried any other Sewing Revival patterns? There are some new ones just out including an interesting pair of diagonal-seamed trousers which are very intriguing so I’m sure these won’t be the last patterns of theirs that I’ll review.
When Harriet asked me if I’d contribute a blog post for Sew Me Sunshine I was excited and very happy to help. After I’d had a good look at all their lovely fabrics I settled on the pink colour-way of the Gemma viscose/linen mix, it’s such a pretty shade with a magnolia flower print. When the fabric arrived Harriet has included a helpful card with full fabric details including fibre composition details plus width and quantity purchased. There’s a space to note if you pre-wash or not before it goes in the stash or straight to use.
The print is quite wide spaced and one-way [actually there are one set of flowers which run in one direction and another set which go the opposite way] so it’s worth bearing this in mind with pattern placement, and all your pieces should be positioned one way or the other.
I decided to make a Maven patterns French Dart shift dress which I’ve made twice before because it’s a lovely simple shape with no fastenings which makes it quite quick to make, three sleeve options, side seam pockets and an elegant roll collar.
Because of the positioning of the print I opted to have the smaller flowers running down the centre rather than the large blooms which would have resulted in a more wasteful lay plan. As I had enough fabric I opted for the long sleeved version which I’ve made both times previously, the gathers at the cuff are so pretty. I cut the sleeves so that similar flowers are on a level with the dress front.
Because the fabric is quite loosely-woven and a linen mix it tends to fray a bit you’ll need to be aware of this. Making a style with lots of gathers may not be wise because it will start to come apart eventually the more you pull the gathers up-the cuffs on this dress were fine as it’s fairly short. The fabric would look lovely in pleats or folds too.
The fabric sews up beautifully, it isn’t overly drapey but it’s nicely fluid and responds well to pressing although like most linen, and linen/mix, there is noticeable but not excessive creasing-this is one of the features of the fabric and you have to accept that as part of it, it isn’t a fault. You could also use it for loose-fitting shirts or trousers, for example the Zadie jumpsuit from Paper Theory would look gorgeous in it or what about the Tilly and the Buttons Seren dress, nothing too tight-fitting though as it will crease badly or ‘seat’. You can always add a soft cotton lawn lining to a fabric like this which might help, this particular fabric isn’t sheer though so you can’t really see through it.
The structure of the fabric lends itself to the roll-neck collar and this one doesn’t have any interfacing in it, it stands well on its own.
I’m really happy with the finished dress, it’s very feminine and in a very unpredictable British climate I think it will be ideal on cooler warm days (does that make sense!?) I’ll wear it with tights in the autumn. Incidentally, I hand finished the hem so that the stitches are invisible, you could machine it up though.
Thank you Harriet for providing me with the fabric and the opportunity to write about it-it also comes in a pale blue colour-way too which is equally lovely if pink isn’t your thing.