Some of your favourite Sew Over 50 casual jackets

The previous Sew Over 50 posts I’ve compiled for your favourite T-shirts and flat-fronted trousers have proven to be extremely popular reference sources for you so I thought it might be useful to add another pattern type to the series. 

This time I’ve chosen to focus on the short(ish) casual jacket, which I discovered has a wide variety of names depending on where you live (or which generation you are from) including jeans, utility, shaker or chore jacket. You know the sort, often workwear-inspired with plenty of pockets, it can be thrown on instead of a cardigan or a heavier coat, it might be a little more chic than a sweatshirt, or it might not. In fact it could be pretty smart depending on the fabric choice or maybe it’s super casual, definitely no longer than hip length though. So already lots of options but those were the basic criteria and then I threw it open to all of you for your own recommendations.

I started my research by going to the #So50Jackets hashtag. You can usually then select images by choosing between ‘top’ or ‘recent’ categories. Top will be the most popular images with loads of likes, probably as a result of the number of followers that an account has or it’s a really cool garment and the algorithm will skew its visibility. I tend to select recents because the images are exactly that, more recently sewn (or at least posted) which is helpful if you want some seasonally appropriate inspiration.

I soon discovered there are a few big hitter styles which are very popular with the sewing community just now so I’ll start with their details and then follow with all the other suggestions which came in from you via comments on my Sew Over 50 post in October. Whenever possible I’ve given the maximum size available, or bust/hip measurement which were correct at the time of publishing this post.

Here we go…

Closet Core Patterns-Sienna Maker jacket: 3 lengths with lots of variety and interesting details. Fits up to maximum bust 66.5″

I’ve recently finished a Sienna Maker jacket, I’ve sewn the short version, view C
Lori @girlsinthegarden.sews also made a short Sienna Maker in this lovely plum-coloured twill. She used bias binding throughout to finish the seams

Merchant and Mills-Ottoline: simple boxy shape with interesting seam lines and two-part sleeves. Fits up to 45” hip

@grannylindasewing made a dark red denim Ottoline
I made this Ottoline in 2020 as a trial run and it’s been in use ever since.

Friday Pattern Company-Ilford: a simple unisex shirt, or shacket, with lots of customising options and fits up to 62”-63” hips

Michelle @sew.sandbox has made herself a natural-coloured soft flannel Ilford shacket, This pattern has been a hit with the sewing community ever since it came out

Sew Over It-Sorrento: a quintessential jeans style jacket with lots of seams and a slightly fitted shape. This pattern is included in the eBook Summer Dreaming and will fit up to bust 57”

Jen @jenlegg_teescreatives is a serial jacket maker so take a look at her profile for some seriously joyful sewing inspiration!

Alina Sewing and Design Co-Hampton Jean Jacket: another traditional jeans jacket which looks stunning in denim but could be a great scraps buster because of the smaller pattern pieces. Maximum bust 44.5”

@sarahguthrie_stitches has made quite a number of jackets including this floral Hampton so I would definitely recommend a look at her profile

Simplicity Mimi G style #8845 a traditional jean jacket with size options for women/men/teens fitting up to 46-48” bust/chest

Anita @anitabydesign always looks fabulous and this white/red combination is no exception

Wardrobe By Me-Canvas: workwear inspired with a casual boxy fit, plenty of pockets! Fits bust 50” Hip 53”

Byrd @yogabyrdsews helped to test the pattern for the Canvas jacket before its release. You can hear Byrd and Molly chatting to Sew Over 50 guests on the #So50Live podcast too

Peppermint magazine issue 55-West End jacket a unisex over-sized shirt shape which fits up to 57”bust/chest

@soozcreates has sewn a scrap-busting flannel West End (and I’m definitely here for the red DMs!)

Seamwork magazine-Audrey and Rhett: Audrey is a traditional jean jacket with lots of seaming and pocket details, Rhett is a simplified version with a similar silhouette, both fit up bust 54” hip 58”

Cathy @ohsewcathy has made a Rhett jacket in sturdy denim

Ready to Sew-Julien Chore Jacket: a boxy fit fully-lined jacket, the sleeves have button cuffs. Fits up to UK22/US18

Lesley @mrsmcstitches made a cheerful red Julien jacket

Grainline Tamarack: a simple shape but extremely popular because of it’s quilting possibilities. Sizes up to UK 30 (US 26) up to hip 58” The Grainline Thayer would also fit the bill but with more pockets.

Muna and Broad-Cobden chore jacket: stylish jacket with multiple pockets and lots of topstitching detail. Fits up to bust 64” hip 71.5” 

The Sewing Revival-Mallard: a classic single-breasted silhouette which features a collar and outsized pockets with flaps. Fits bust up to 47”/hip 50”

Papercut-Stacker: a utility button-up in a cropped boxy fit, fits up to 46.5” bust 

Butterick #5616: another popular pattern but you’ll need to look beyond the awful sketches and photos on the packet, the line drawings will give you a far better idea of the possibilities. Fits up to UK 22(US18) no measurements given

Style Arc-Adelaide: simple silhouette with various pocket/cuff/options plus a full lining pattern too. Fits up to bust 58” hip 61”

Pauline Alice-Ninot and Ayora: Ninot is a boxy shape with a Peter Pan collar and welt pockets, fits up to bust 42.5” whilst the Ayora is a short reversible quilted jacket and fits up to bust 47”

Itch to Stitch-Causeway: a bomber jacket with elasticated hem and princess seams which can also be made fully reversible. Fits up to bust 49.5” depending on cup size

Aime Comme Marie-Moderne: a French brand, this is an adaptable loose shacket style which will fit up to bust 52/54” 

Sew Different-Swing jacket: this is a relaxed throw on jacket with no fastenings, there are large pockets incorporated into the front diagonal seams. The largest size will fit up to a 50” bust/52.5” hip

Helen’s Closet-Pona: another softly tailored jacket with no fastenings, it has wide lapels, patch pockets and roll-back cuffs. Fits up to bust 54”

Deer and Doe-Lupin: a short jacket with back yoke and waistband, welt pockets and a draped collar. Fits up to 45” bust 

Fabric-Store.Com-Paola: a free PDF pattern if you register, it’s workwear-inspired with a straight boxy shape, 4 pockets and flat fell seams. Sizes up to US 28/30 (no measurements given) 

Love Notions-Metra: another soft blazer shape with shawl or wide lapel options, princess seams with welt pockets. This pattern is intended for stable knits and will fit up to bust size 57.5”/ hips 59.5” 

Pattern Union-Felix: this is more of an edge-to-edge French style jacket than workwear, it can be made in 3 different lengths and will fit a maximum bust size of 54.5”

Tessuti-Ines shirt: this shirt pattern would translate well into a jacket simply by using a weightier fabric. Fits up to UK 22 

Tessuti-Lyon jacket: a semi-fitted ‘cardigan’ style which is ideally suited to boiled wool. Also fits up to UK 22

McCalls #7729 another traditional jeans jacket with lots of ideas for customisation, fits up to UK 22

Fibremood-Madou: an adaptable loose-fitting shirt/jacket pattern with a wide size range fitting up to 57.5” bust

Cashmerette-Auburn jacket: a classic short length single-breasted blazer specifically designed for the fuller figure. The Princess seams help to give an excellent fit for up to 62” bust

Patchwork and Poodles-Patchwork chore coat: this jacket is specifically designed to make using pre-quilted fabric and as such is a simple shape. It is relaxed fit rather than oversized. It can be made up to bust size 56-58”/hip 58-60”

So there you have more than twenty suggestions which came directly from the followers of @SewOver50, there are undoubtedly many other suitable patterns, in fact there were several that were suggested which I could not trace so I assume they are now out of print or discontinued. I’ve given you descriptions and links for every pattern rather than loads of individual images so click on the links to see what each one looks like. Don’t forget to check if there’s a hashtag for the pattern too, if so there will be plenty of inspiration to be had from that. 

If you sew any of the patterns here make sure to include the #So50Jackets hashtag as well as #SewOver50 (@SewOver50 in Stories) A lot of the companies mentioned here will acknowledge our existence but several resolutely do not (presumably run by immortals?) I found it interesting that so many of your suggestions are now from Indie pattern companies and not the Big Four as some might expect. Times change rapidly and we are moving with them, I think it’s proof that whilst we may be a little older we are still happy to keep up with trends in fashion whilst doing it very much our way. SewOver50 will continue to push for greater recognition of older sewers and makers at any opportunity because we know we all have something positive to offer the home sewing community as a whole.

Until next time, happy sewing

Sue

Trying out a new Simplicity patterns PDF

Simplicity have long been one of the most familiar big names in the home sewing paper patterns market but many of us are now choosing to use PDF patterns instead for a variety of reasons. Simplicity have recently decided to dip a toe into the waters and release a small collection of patterns as PDFs for the first time.

I was first invited to try one of this new range of PDF patterns way back in high summer but for a variety of reasons it’s taken until mid-October to get completed. 

Simplicity have released a range of ten basics which are available now from Sew Direct including several tops, a skirt, a dress and a jumpsuit, plus two children’s patterns and a free clutch bag pattern. 

I chose the tie-front robe jacket SP110 which appealed to me as a cover-up in place of a cardi or sweatshirt and, because it was July at the time, I picked a pretty, drapey Atelier Brunette viscose crepe in a pale ivory print kindly provided by Minerva. The robe jacket is a very simple silhouette with a wide grown-on 3/4 length sleeve, the neck is finished with a band and the tie waist is elasticated across the back.

For me, it depends how many pages a PDF has whether I print it myself or send it away (my usual cut-off is anything over 30 sheets, more than that and I’m not keen on the printing and assembling) However, we had been experiencing postal strikes here in the UK and I needed to get started so I printed at home this time. I think the paper in my printer was a bit out of alignment because not all the pages were printing as accurately as they should have been but fortunately I could see what had gone adrift as I assembled the pages and was able to rectify it. Make sure you print the test page and check carefully that all borders are present and accurate, don’t simply check the test square measurement and wander off into another room while it’s all printing out… With A0 printing this shouldn’t be an issue.

The pattern includes all sizes from UK6 to UK26 (up to 48” bust) which are broken down into two size bands (there isn’t a layering option to isolate which sizes you choose to print unfortunately) The robe jacket consists of just six simple pattern pieces.

The instructions sheet/booklet design is attractive and uncluttered with clear diagrams and straightforward step by step instructions. For the more novice sewer there is a glossary which includes all the sewing terms that will be used throughout, and a page explaining pattern markings. This being a US-originated pattern, all the seam allowances are only in inches so you may want to write your own metric equivalents on the page somewhere before you start, to avoid confusion. 

snipping the curved underarm seam means it sits more smoothly without puckering when it’s turned through
pulling up the gathering stitches
turning through the front ties using my old school ruler!
I joined two pieces of elastic using the 3-step ‘elastic’ stitch on my machine.
two different methods of pulling the elastic through, either using a bodkin or using a safety pin with a piece of masking tape to prevent it from opening accidentally inside the channel.
All finished

This is a quick and easy make, not much more than half a day probably, and everything comes together well. I thought the instructions and diagrams were clear, well explained and thorough without being over-complex. Overall a relative beginner should be able to manage this pattern. I like to print my instructions in booklet form but I should have increased the font size a little as I struggled occasionally to see the diagrams. I think the diagrams are actually very good, I simply didn’t print them large enough. If you are reading them from a tablet or lap top then this isn’t so likely to be an issue.

My only ‘problem’ now is that I have a summer garment as we head into autumn/winter. I intended it to be a light cover over summer dresses and tops so I’ve tried to style it for the season as it is now. I made a UK14 but possibly should have gone up a size, I feel self-conscious about how it looks around my midriff. It falls exactly on my natural waistline (I’m 5’5” tall) rather than above it like the models who are probably 5’8”-5’10” minimum. Hey ho, I didn’t get the tall gene but I did get the yoyo weight one instead! Basically, I’m pleased with the garment overall but less pleased with how it looks on me just now. I’m determined to get use out of it though but it will probably not be much before next spring. 

Wearing it with Vogue Marcy Tilton #8499
and with a newly finished pair of wide-legged Eve trousers by Merchant and Mills
And finally with my recent Nina Lee Portobello trousers and a vintage shirt pattern from around 1978!

I have a small quantity of the fabric left so, if there’s enough, I may consider adding it to the bottom under the waistband. This shouldn’t be too difficult because the waistband is straight and it would then give a little peplum which I might feel more comfortable with. It wouldn’t be too difficult to add a longer skirt to turn it into a coat as an alternative.

Being a PDF means you can buy the pattern to use immediately, and all the others in the Simplicity PDF range from Sew Direct. I was paid a modest fee for my pattern review and generously provided with the fabric to make it from Minerva. All views expressed are of course my own. 

Until next time, happy sewing

Sue

Portobello Trousers by Nina Lee London

This post was originally written in January 2021 as a Minerva post for their recently completely revamped their website. I didn’t publish it here at the time and I’ve now sewn another pair of Nina Lee Portobello trousers so I thought I would share my thoughts. I have a paper copy of the pattern but it’s possible that it is now only available as a PDF, unless you can locate a copy somewhere.

I had chosen this interesting reversible woven jacquard fabric in black/cream because I was attracted to the random wavy stripes. When it arrived I found that they ran across the width of the fabric not down the warp so I had to bear this in mind when I cut them out. Fortunately, at 150cms wide with a nice firm selvedge, I didn’t need to alter my plans because I could cut them across the weft grain instead. I intended to make a pair of Nina Lee Portobello trousers and I thought this fabric would look good in this wide-legged style, they have 3 front pleats, side pockets and a centre back zip. I opted to use the black as the outside but I could have used either side of this fabric, or both sides at once to make a contrast. 

I folded the material carefully across the width matching the selvedges to each other so that it wasn’t twisted and then pinned the front and back pattern pieces on, ensuring they were at a right-angle to the selvedge on the weft rather than the usual warp grain line. To mix things up a bit I cut two of the pocket bags on the normal grain so that the stripes ran crosswise, plus the remaining two pocket bags in a scrap of bright pink lining fabric. 

The fabric was best suited to garments like trousers, skirts, structured dresses, jackets or formal business-type wear although how much call there is for that just now I’m not sure. It doesn’t have much drape but I decided it was still suitable for the Portobello trousers. 

The fabric sewed well although I think because I cut it on the cross-grain, there was quite a lot of fraying so I’d advise overlocking all the edges singly before beginning construction. 

The style is close-fitting on your natural waist line so the instructions advise choosing according to your waist measurement and go up a size if you’re in between sizes, it’s almost always simpler to take something in that to let it out. The fit over the hips is very generous but if you have an extreme difference between your waist/hip ration then it’s worth double-checking before cutting out. I fell between a UK 12 and 14 so I went with a 14

I traced off the pattern and it went together well, it’s a very simple pattern with clear diagrams and instructions. I ignored the waistband pattern piece because I chose to use an interfacing product called Fold a Band which is perfect for straight waistbands as it gives exactly the right seam allowances and folds. After checking the fit without a waistband I worked out how long my band needed to be, including an overlap and seam allowances, which I then cut in fabric the same width as the Fold a Band rather than using the pattern piece. Fold a Band comes in black or white, and medium or firm weights, depending on your fabric type, and makes a finished width of 2.5cms once it’s sewn on. This is a fairly narrow finish which personally I think is just right. Once I had ironed the interfacing to the fabric I overlocked one long edge, this would be the one to the inside of the finished garment. Pin and stitch the un-neatened edge right sides together to the waist, you could add a couple of useful hanging tapes to the side seams at this point too. Make the turnings at the ends and then you can turn up the band in the usual way and slip stitch it by hand or sink stitch from the front to secure.

Finally, after one last check of the fit, sew on a fastening or make a buttonhole with matching button. Lastly, try them on and turn up the hem to your chosen length, I overlocked the edge and made a 5cms deep turning which I slip-hemmed in place. 

The finished trousers, having a deep hem on a style like this gives them additional weight so that they have the casual look I was after.
Look at that lockdown hair!!

Since making the black and white Portobellos I have recently sewn a new fuchsia pink crepe pair. The very inexpensive fabric was bought from Walthamstow market late in 2019 with the intention of making wide-legged trousers but they didn’t actually get cut and sewn until October 2022.

I urgently needed a project to sew at the Herts Sewcial with about 15 minutes before I had to leave the house. Initially I was flapping around thinking of all the garments I wanted to sew here and now but then I remembered I had suitable fabric along with the good intentions to make another pair of Portobellos. The pattern was already traced and I just had to locate the fabric but I managed to grab everything I needed (an orange zip but no one would see that!) and rushed out of the house!

There wasn’t a lot of space to cut out but with plain fabric and no print to allow for it didn’t take too long.
the view from my seat
I used Fold-a-band again, it’s brilliant for straight fixed waistbands.
Pink and orange are complementary colours so that’s ok…
I popped in a label by Little Rosy Cheeks too
herringbone hemming in front of the telly.

I was pleased with the finished trousers, I think the unusual vertical stripes are striking and the wide leg is very comfortable to wear. They were a bit baggy over the bum though but I think taking them in significantly would have altered the overall look of the style, I’m not sure. Looking again at the back leg pattern piece I think it could be overly generous compared to the front, the darts might need to be a little longer, so I might make some changes on the next pair (I didn’t, because I forgot that I’d written this comment!)

Heading to the autumn Knitting and Stitching show in my new trews and the LB Pullover by Paper Theory

I’m very happy with the new pink pair, even though they weren’t high on my list for Saturday. The bright colour will bring me a lot of joy when I wear them and I’ve always loved that Katharine Hepburn 1940s or ‘Brideshead Revisited’ insouciant look. I’m not sure I’ve personally achieved that look but hey ho, that’s never stopped me yet.

Until next time, happy sewing

Sue

Edinburgh Frocktails 2022

When Judith and Sandy announced the first @SewOver50 Frocktails event was going to be held in Edinburgh in September 2022 I knew I had to be there to celebrate its success with them. SewOver50 has been a big part of our sewing lives for the last four years and I was so excited at the prospect of meeting some of the people I’ve chatted with over that time. As it turns out I wasn’t at home in Hertfordshire just then but on holiday in the North York Moors so I was basically halfway there!

Mr Y dropped me off at Northallerton station on Friday morning and I was on my way!
While I waited for my flatmates Kate and Fiona to arrive I had time to wander over to Princes Street gardens and the Scott monument.
I had booked a 3 bedroom flat for us very close to the Frocktails venue in Leith, not too far to totter in high heels.
But first, pre drinks at Malmaison with some of the gang, Lisa, Janet, Corrie, yours truly, Nic, Elke, Judy, Kate and Lisa. This group of people alone had travelled from England, Wales, Canada and Germany!
Oh well if you insist…there was delicious food later too
We each got to choose a goody bag from the table which was stuffed with generous discounts and gifts and some also contained special spot prizes. I was thrilled and surprised to discover I had won an Advent calendar from Fabric Godmother-I can’t wait to receive it in November to see exactly what it contains.
and ArkDefo were incredibly generous with the sheer quantity of fabrics they donated as gifts. They are new company specialising in ex-designer fabrics at vastly reduced prices, usually waxed cottons in various weights and loads of colours. In fact I ordered two pieces from them before I even got out of bed on Saturday morning!
I definitely need new glasses…#squinting
Lou and Jen chatting, in fact it’s a whole room of people doing the same thing for the whole evening.
Selfie time with Ruth and Fiona
Judith chatting with occasional SewOver50 stand-in editor Janine who had flown all the way from Canada (with Sandy in the background, who had come even further, from Brisbane!)
still gassing…with Margaret this time
There were speeches (not karaoke) from Sandy and Judith
The Granary in Leith was a perfect choice of venue for the Frocktails
Sandy very sweetly thanked me for my contribution of writing the SewOver50 blog, which you’re reading right now!
I was especially happy to finally meet Lou because through a strange quirk of fate we discovered she had been the primary school teacher of my best friend’s two boys.
another daft selfie
getting into place for the group shot. The professional photographer for the evening Chris Scott captured some really lovely candid shots. There was also time for a catwalk where me-made creations were shown off and appreciated, and the evening ended with some Scottish country dancing (the Scots having a distinct advantage over the rest of us when it came to execution!)
Going though the goody bag on Saturday morning in bed
Leith looking beautiful in the sunshine on Saturday morning

On Saturday many of us headed into Edinburgh city centre on the bus to visit first The Dress Fabric Company followed by a glorious walk across the Meadows until we eventually arrived at Edinburgh Fabrics. I’m polishing my halo at this point because I resisted buying any fabric from either shop…others didn’t!

Arthur’s Seat in the distance across the Meadows
Herding cats!
The collective noun for a group of dressmakers? a bobbin of course!
Saturday supper at The Shore with Fiona, Diane, Janet, Corrie and Kate
it involved quite a bit of silliness
a lot of silliness in fact
got there, after a fashion, in the end
Edinburgh Castle from Princes Street
Waiting for the famous One o’clock gun…it doesn’t fire on a Sunday we discovered
Serious tile-action in the loos at the Scottish National Gallery of Modern Art
Once we arrived at the correct gallery (there’s more than one Scottish National Gallery it turns out) we enjoyed the Barbara Hepworth exhibition
a recreation of Eduardo Paolozzi’s studio
and finally Kate and I headed back to the airport to wend our way home, tired but very happy from a great weekend spent with friends from far and wide.
Going through the goodie bag at home, I may have taken advantage of some of the generosity of the sponsors-Thank You

What a wonderful weekend it was, to be reunited with existing friends and meeting new ones too from all over the country, and the world in fact. Judith and Sandy have created, and sustain, an amazing community which we all get so much from, very real friendships have been made because of SewOver50. Trying to explain this to people who don’t use social media, or have had a bad experience of it, isn’t always easy but being in the room with over 70 people who all came together because of a simple connection-making our own clothes-was all the explanation anyone would need.

Until next time, happy sewing

Sue

The Maker’s Atelier asymmetric gather dress

In the summer of 2021 Simply Sewing magazine invited me to choose an Indie brand pattern to sew and review for them. After some deliberation I settled on the Maker’s Atelier Asymmetric Gather dress which they generously provided me with free of charge. The article was published a year ago now but if you didn’t see it then I’m sharing some of my thoughts about the pattern here.

I like Maker’s Atelier patterns because they are deceptively simple to look at but many of them have stylish details such as notched hems, interesting seam lines, button-up backs or gathered sections which can elevate the garment out of the ordinary. On their website, and also in their newsletter, they always illustrate how much variety you can create from reusing a single pattern simply by sewing it in different fabric-types. I’ve made numerous iterations of their Holiday Shirt and Top using a number of different fabrics and embellishments for example.

If you’ve seen my various makes of Trend Patterns you’ll already know I’m rather fond of an asymmetric style and although the Maker’s Atelier one is a simple cocoon-shaped shift dress the gathered features really lift it out of the ordinary.

Because the front pattern piece is cut as a whole ‘right side up’ by flipping the piece over you can have the gathered neckline to the right or left depending on your preference. I love how the back is given shape and definition by adding the wide elastic at waist level too. 

I made this first version in gingko-printed crepe fabric bought at least four years ago from Fabrics Galore.

The style works best using a fabric that gathers softly and has some drape which is why the viscose twill kindly given to me by Sew Me Sunshine worked well. I wanted a fabric with a little bit of weight to it so that the elastication looked right, a stiff fabric without any fluidity would not flow nicely over the contours of the body. I really wanted a design that would look interesting whether it was gathered or not. This particular fabric from Mind the Maker contains 100% LENZING™ ECOVERO™ Viscose, which is a sustainably certified viscose fibre by LENZING™ with minimal environmental impact in the production process (compared to production of traditional viscose fibres). Some fibre and fabric production methods can be very damaging to the environment and the work force so this is at least a step in the right direction.

It was very satisfying to see the shape come together once I’d inserted the elastic, I know it probably sounds odd but I do love a bit of understitching on a facing. However I’ve found the back neck facing keeps creeping up though so I need to find a way to fix that.

Viscose often shifts around quite a lot so it’s important to not pull or drag it too much while you’re laying it up so that your pieces aren’t distorted once you’ve cut them out. If you have to cut on a table which isn’t quite big enough make sure the overhanging fabric is at least supported on a chair to prevent it pulling the fabric on the table out of shape. If you can manage to cut on the floor that would probably be preferable. Thankfully there aren’t many pattern pieces though so it isn’t a complex lay-plan.

My measurements at the time fell between a UK 12 and 14 so I measured the front and back pattern pieces to work out what the finished bust and hip sizes would be, from these I opted to sew a UK12. I was happy with the final fit, there’s just enough fullness without becoming too voluminous and baggy. I’m 5’5” tall and a little ‘pear-shaped’ but this style would suit a variety of body shapes because it skims over the waist and thigh area, it isn’t a ‘fitted’ style. The elasticated sections on the hip and back give the slightly-cocoon shape some definition and this could be adjusted to your personal preference. I’ve gained few pounds since I last summer but the dress still looks okay I think.

At Eltham Palace in south London, summer 2021

The one major adjustment I made was to shorten the pattern by 5cms before cutting out. I read a few online reviews before I started which all said they wish they had, or they did, make it shorter. I’m happy with how the finished length looks on me, it would definitely not have looked right if I’d left it as it was. I took the 5cms out horizontally across the front and back just below the hip/knee area, not from the hem. If you shorten it from the hem you will make the shape at the bottom a little wider which might result in it losing a little of its ‘peg’ shaping. The only other thing I did was to slightly raise the position of the elastic channels on the back and hip by approximately 1.5cms so that proportionately they sit a little higher on me, I think it looks better. 

An easy hack would be to use a narrower elastic than suggested, or sew two or more rows of narrower elastic into channels, you could even use shirring elastic. Instead of elastication how about slotting ribbon or tape through the channels, sew buttonholes for the tape and leave the ends dangling so that they are decorative and adjustable, perhaps finish the ends with small toggles to make a feature of them? Leave the sleeves off completely maybe or turn them into full-length sleeves with elasticated cuffs, or a cap sleeve. If you’re feeling adventurous you could even elasticate the hem! What about having fun playing with the grain line, especially if you use a check or striped fabric. There aren’t any pockets so you could add at least one in-seam pocket, probably on the non-elasticated side seam.

As well as viscose-types like I’ve used you could also choose fabrics such as handkerchief or washed linens, crepe, softer types of satin, crepe de Chine, challis and wool crepe. Softer cottons like lawn or chambray-types would all work well too. You don’t want anything overly stiff or thick because you wouldn’t get the lovely definition to the elasticated folds, they could become a bit clunky. Ideally avoid fabrics which crease badly if you might be sitting in it for any length of time, creases would spoil the look of the front. 

I chose to trace off the pattern, I find I’m doing this more and more often even though I’m not a big fan of doing so. Take your time if you’re tracing the pattern, transfer all the markings accurately. Because the neckline is asymmetric make sure you cut the neck facing to match and double check you have a mirrored any pieces that are a pair before cutting into your fabric. Read through all the making instructions before you start and highlight any areas that you think are, or might be, trickier for you. 

The Asymmetric Gather dress isn’t a difficult garment to sew up, I would say anyone from an adventurous beginner upwards would enjoy making it. It certainly took me less than a day to make, especially as there are no openings like zips or buttons to construct. 

I’ve found it entertaining to see my changing hairstyle since I first made this! I was paid for the original article last year but all thoughts, advice and opinions are my own.

until next time

Happy sewing

Sue

Italian cloth and hacking a ‘vintage’ pattern

First a bit of preamble, because the origins of the fabric I used for this top were important. In June 2022 me and Mr Y were finally able to return to mainland Europe again for a four day stay in Florence, one of my favourite cities. We knew it would probably be very busy with visitors during the summer but frankly I didn’t care about this, I was just so happy to be able to see all those magnificent buildings and beautiful art again.

In between looking at the art and strolling the ancient streets I indulged in a little window shopping at the stores where I can afford literally nothing, including Alexander McQueen, Missoni and Gucci.

I could get a closer look at the details in the Gucci store that is based in the Gucci exhibition (worth a visit)
Missoni….obviously, look at that extraordinary panelled dress
Alexander McQueen…be still my beating heart

Amongst all these shops though I *may* have come across a fabric emporium….In truth, there are quite a number of fabric shops in Florence, what with this being Italy and home of fabulous quality textiles.

I failed to make a note of the name of this particular shop but it was very close to the Duomo and the Baptistry. I didn’t go in (thankfully it was shut at the time!) but they clearly specialised in very high-end alta moda fabrics which were nowhere near my budget!
Stunning beaded silk cloth

I had, however, been given the name of another more accessible shop by a kind Instagram follower so we set off to find it with only the vaguest idea where it was. Bacci Tessuti is quite close to the Medici Chapel and San Lorenzo and, with a little help from Google Maps, we found it eventually.

The air-conditioned shop was a very welcome haven from the extreme heat Florence was experiencing during our visit and I was not disappointed by what I found, there is a wonderful selection of lovely cloth to browse.

The choices in a beautiful store like this can be quite overwhelming so I had a sort-of plan to buy something which felt ‘Italian’ to me. I set out looking at their fine linen, personally I would call it handkerchief linen and it’s much lighter and softer than most of the heavier and more durable linens I’ve seen on sale in the UK. I homed in on one with a large design in blue, red and pink flowers (I love a floral fabric but I don’t often wear it) but this one ’spoke’ to me. So that was great but then the helpful shop manager, who spoke excellent English, pointed out the Liberty Tana lawn he had at a very good price! I would have resisted but my husband wanted to buy some for me so who am I to turn him down!

These were going to be my total purchases but when I went over to the counter the manager told me that the linen cloth was by the textile designer for well-known Italian brand, Pucci. At this point he produced from under the counter several short length pieces of some beautiful Italian designer fabrics including Dolce and Gabbana! They were all very lovely (and still expensive) but I wouldn’t have a use for them. The one I did fall for though was a small piece of silk/cotton cloth from Pucci with their trademark psychedelic design in delicate ice cream shades. It still wasn’t cheap but it was just a bit different and there was enough to make a top of some kind. So of course it came home with me…

it’s a bit crumpled from the wash after I got it home
The linen is on the left, plus the two pieces of Tana lawn bought by my husband, and that was my view from the hotel in the background, straight over the Arno with the Ponte Vecchio just to the left.

With my purchases safely stowed away we got on with enjoying the rest of our holiday (although I spent a fair bit of time planning in my head what I was going to make when we got home!)

Initially I was going to use this ‘vintage’ Style pattern as is (I bought it new in 1988 so it’s a little upsetting to think of it as vintage!) I used it several times back in the day, and I’ve sewn it again a couple of times in the last few years. The back buttons are the feature I like, the rest is basically a woven T-shirt.

As I said earlier, I had no more than 1m30 of fabric to play with and I still wanted to do a decent job of matching the print as best I could. The basic pattern fitted on the fabric, it’s only a front, back, sleeves and facings, but I thought it might look a bit meh, and there would still be some wastage. After a bit of a rethink, by shortening the body and making two deep ruffles across the width of the fabric I knew I would get a much more interesting design and have very little wastage in the end.

Basically it was a case of working out how long I could afford to make the top section and still get ruffles that were a balanced length [I had the Merchant and Mills Florence top in my head as inspiration] I took a line horizontally straight across to the centre front/back from the side seam approximately 15cms down from the bottom of the arm scye of both the front and back. What I should have done if I had stopped to think about it was make the centre front longer, I didn’t though and as a result the front hem lifts up because of my bust. The back is fine though.

The first dashed line is roughly where I folded out the pattern to make the horizontal seam, the curved dashed line on the front is how I should have shaped it.

I was able to cut the front and back pieces side by side on the folded cloth which meant the design ran smoothly around the garment. From the remaining fabric I calculated how deep two full widths of the fabric could be (approximately 28cms each strip) and still have enough to get two sleeves and the neck facings out too.

Once I had all the pieces it was just a case of assembling. First I did my usual scavenge through my button boxes to find enough suitable colours in matching sizes. After joining the shoulder seams and attaching the neck and back facings I sewed all the buttonholes at this stage, by doing this first it meant I wasn’t fighting the bulky seam of the gathered ‘skirt’ later.

My usual mash-up of various buttons down the back
By sewing the buttonholes at an early stage meant I didn’t have to struggle getting the bottom one under the buttonhole foot with the gathering in the way.
All finished. I know I’m just being fussy but you can probably see what I mean about the top rising up at the front slightly. There is no bust dart on the pattern which would have made a difference.
I’m pleased with how the top uses almost all the fabric and shows off the print to good effect, I didn’t want to chop it up unnecessarily and there weren’t many options with the small quantity I had anyway. I had to use a very narrow pin hem on the ruffle to maximise the length, the sleeves had their normal hem allowance on them. If you want a few more ideas for finishing hems I wrote this blog a couple of years ago which you might find useful.
I opted to have the ruffle run straight across the back rather than have an opening (this was because I was being lazy and didn’t want to make a facing and sew more buttonholes!!)
The top is shorter than I’ve worn in the recent past but I like the look, especially with the flat-fronted Eve pants by Merchant and Mills
Out in the wild at Africa Fashion which is on at the Victoria and Albert Museum in London until 16/4/23

As for the other Italian fabrics, I have plans to make a shirt dress with the beautiful linen, I have a design I’ve drafted and sewn a couple of versions of but there’s probably still a few tweaks I want to make to it before making it in the ‘real thing’. The Liberty lawn is waiting for the right project to present itself too, no need to rush these things. I’m all for sewing the good stuff but it’s really upsetting if you sew a dud with it!

Until next time, happy sewing

Sue

Vogue Marcy Tilton trousers #8499

I’ve had this Marcy Tilton trouser pattern Vogue 8499 for an absolute age, several years at least, and I took it out for consideration at regular intervals but for some reason it just kept going back into the box. Maybe the leg shape felt a little too radical for me on those occasions? But then the Style Arc Bob pants kept cropping up everywhere, especially in the Sew Over 50 community, so I returned to this pattern because of its similarities to the Bobs. Now I know I’m not six feet tall or a size 8 but the photo on the packet isn’t very helpful because I think it gives the distinct impression that the legs are fairly slim with a slight bulbous shape to the hem. The front is flat with deep pockets inserted into the side front panels while the back waist is elasticated, the curved leg shape is created though the addition of darts at knee level. They come in two size brackets UK 6-12 and UK 14-20.

I opted to sew the shorter length version (on the left) and although the pattern gives you body measurements to choose from, unlike many patterns, there are no finished garment measurements for guidance. I found this lack of information meant I really struggled to know which size to cut, my current waist measurement suggested that I should go with a size 20 which I found a bit hard to believe given that the back waist is elasticated. [I should add a caveat here that the pattern has been in print since 2008 and I’ve noticed it has since been re-numbered as V1731 so it’s possible that the information has been updated, maybe you can let me know if you have this version of the pattern?]

You might think that visually the width of the front and back leg pieces would give some indication to the sizing but they are cut in two parts so the individual sections are slightly deceptive. I’m very familiar with the style of instruction sheets which ‘Big 4’ pattern companies (or is it 6 now?) use because they are what I learned with from the age of 11 and, in my opinion, the sewing instructions and diagrams are very clear. Because of the quantity of topstitching there’s a certain order to follow but it’s very methodical, I used a triple straight stitch rather than actual topstitching thread. I had a couple of try-ons whilst I was sewing them but I did have Covid at the time so maybe my brain was just not functioning clearly and I simply didn’t think they were going to be as huge as they have turned out to be.

Ta-dah!?
I really wanted to disguise the bagginess over my hip and bum area so I started by teaming it with my Merchant and Mills Ellsworth shirt I don’t think this looks too bad.
The deep pockets are great
I’m happy with the length, I am 5’5” tall and I didn’t alter it from the pattern, the shape and the width at this point are fine.
I’m okay with the amount of fabric at the front
Next I tried it with my trusty Maker’s Atelier Holiday Shirt, a long-time favourite.
I start to have a problem once I get round to the back…there’s way too much fabric over the seat and hip area, it gathers in at the elastic casing but there’s just too much of it so it’s bulky and it isn’t a good look. I didn’t take a photo of the back, I will add one here when I get around to it.
closing my eyes to the problem…
I do think the dart details on the knees and the topstitching certainly elevate the style from more run-of-the-mill trouser designs though.
As you can see there is loads of fabric in the back, the pattern description merely says “very loose-fitting through the hipline”. With hindsight, and with the absence of ‘finished’ measurements, I should have pinned the paper pattern pieces together to check first but that’s rather blaming myself for the error when in fact I’ve done nothing wrong!
Side view

So there we are, judging by some of the comments on my Instagram post about these trousers, a number of you have the pattern but haven’t sewn it up yet or, like me, you have had similar size choice issues with it. If you have an older copy like mine then I strongly suggest you pin the pattern fronts and backs together first and measure them before going anywhere near your fabric, or lay the pieces on top of a pair of me-made or RTW trousers which are similar and a satisfactory fit. This pair cost me very little because the fabric [some sort of linen/cotton/viscose type] was very cheap at Walthamstow market and I bought it for exactly this type of garment. As with any home sewn garment which doesn’t quite work out it’s feeling that the time spent on something I don’t love has been wasted which is annoying. That said, it’s been a learning process and I know I will make another darker coloured pair, possibly in a drill or denim-type cloth, but I will cut down the front by two sizes and the back possibly by as much as three sizes. I haven’t helped myself because I’m feeling really bloaty and despondent at present so I think these just emphasise this. I tried wearing them with a T-shirt tucked in but that just made me feel worse so it’s back to the drawing board for now. If, however, you love a very oversized trouser then these could be the ones for you.

As I said in my IG post, they will be great in warmer weather (which isn’t that often here) I’ll probably style them with my heavy black books, white Trend pleated shirt and denim Simple Sew cocoon coat in the winter hoping I’ll be rocking a little European-style continental chic, or I will simply put them on but not check in the mirror before I leave the house!

Until next time, happy sewing

Sue

A few of your favourite Sew Over 50 trouser patterns

Recently on the @SewOver50 account a follower asked if we could help her with any suggestions for trousers/pants that featured a side zip and/or a flat front and, as we’ve come to expect, the hive mind flew into action. 

Speaking personally, my primary reason for wanting a flat front is that it falls more smoothly over my not-so-flat tum [Years of fashion magazine input tells me that a flat tum is highly desirable, it’s what every woman of every age should want to achieve and anything less than perfect and a bit wobbly should be kept out of sight…Complete and total nonsense obviously but it’s very hard to undo so many years of conditioning] So, whilst I know it really shouldn’t matter it somehow still does matter to many of us and, because of that, we still continue to search for those perfect and often elusive trousers which give us just the thing we’re after, whatever it is. Sometimes we choose a smooth front because we want the top or blouse that’s worn with it to be the highlight and features like fly openings or pleats can be a bit bulky and change the silhouette we desire, but it isn’t always about hiding ‘figure problems’. One follower pointed out that as a person with physical limitations the trouser choices she made had to be based upon practical reasons which made her life more comfortable and straightforward and could not be influenced by mere vanity, a luxury not everyone have.

Much like the SewOver50 go-to T-shirt list I will simply give you links to the many and various patterns which followers have suggested. I’ll begin with the ones I have sewn myself so they are my personal opinions and then follow with the rest. Most of these patterns either have a side or back zip, a few have an elasticated back, some are pull-on and the majority have a flat or flattish front. Where I’ve mentioned sizing it will be UK sizes unless I state otherwise. 

Let us begin…

Eve trousers by Merchant and Mills are as basic and classic a shape as it’s possible to have. They have a side zip and darts front and back with a fixed waistband. They have a tapered, slightly cropped leg shape without being close-fitting and a turn-up hem option. I’ve made 3 pairs (so far) in very different fabrics and they fill a gap I had in my wardrobe for just such a garment. There are two patch pockets on the back but I think this understated style lends itself to many hacking opportunities. Sizes available are UK 6-18 or 20-28 paper and PDF

Eve trousers made in soft green babycord

Sidewinder Pants by The Sewing Revival The USP of these flat front and elasticated back trousers is the unusual side seam which winds from the waist starting slightly in front of the hip bone, down the side of the leg and finishing behind your ankle bone. There are pockets set into the seam and the Sidewinders can be hemmed with or without a turn-up or with a deep elasticated cuff. I found them very straightforward to sew-I’ve made 3 pairs of these too in a variety of fabrics including one pair in a really nice heavy jersey with the elasticated cuff. I wrote a review of them a while ago which you can read here. It’s a PDF only and sizes available fall into 4 brackets UK 6-12 10-16 14-20 and 18-24

My Sidewinders in jersey
Sidewinders in grey suiting with pink topstitching to highlight the seam detail.

Palazzo Pants by Simple Sew This style has darts front and back with a fixed waistband and a back invisible zipper which runs up into the waistband. It gives a smooth close fit around the body which then widens out to very voluminous legs. There are pockets in the side seams if you want them but could easily be left out. I think they are a lovely shape, and I reviewed them here when I was a Simple Sew blogger, but if I made them again I would sew a regular overlapping waistband which closed with a button and buttonhole or a hook and bar because they are a bit tricky to do up. UK sizes 8-20 paper and PDF

Simple Sew Palazzo pants

Portobello trousers by Nina Lee These trousers have a lovely Katharine Hepburn vibe, they aren’t technically flat-fronted because they have deep pleats but they zip up at the back, which has darts, so there’s no extra bulk in the front as a result. They sit on the natural waist with a fixed waistband, have wide straight legs and there are pockets in the side seams. I made a pair in a slightly-too-springy fabric but they look OK and are very comfortable. I reviewed them on the Minerva website, a better fabric choice would have been something like a nice heavy crepe or twill, anything with a bit of drape would look great. I believe Nina Lee patterns are only available as PDFs now, sizes are in two brackets UK6-20 and 16-28

Portobello trousers by Nina Lee

6351 by New Look This is a pattern for separates and I’ve used the trousers a few times now. They have a drawstring (and elasticated) waistband, side seam pockets and the legs fall wide and straight. If these fit well on the hips then there isn’t too much bulk from the gathers at the waist-I’ve made them in linen and they are gorgeous in warm weather. I shortened another pair I’d made but didn’t wear so much and they have had so much more use as mid-calf cropped pants. Paper pattern only UK 10-22 (I think) 

New Look 6351 worn with The Maker’s Atelier Holiday shirt in Assisi, Italy

That’s all the patterns I’ve sewn myself so now it’s over to you, in no particular order…

Ultimate trousers by Sew Over It these slim-fitting trousers have a side zip and a facing rather than a waistband. They have been around since the very earliest days of Sew Over It and I’ve heard reviews which swing wildly in either direction. Some people swear by them and others say they can’t get a satisfactory fit. My advice would be to read a few reviews before making your decision. They only seem to be available as a PDF now UK sizes 6-20

Bev in her Ultimate trousers

Pietra pants by Closet Core these are a more recent release from Closet Core as part of their ‘Rome’ collection and they already have a legion of fans. There’s no zip, the back is gently elasticated with wide elastic, the front is smooth because of a grown-on slightly-raised waistband, there are quarter seams down the front with pockets plus there are three leg shape options-tapered, wide leg and shorts. That number of variations alone must make them excellent value for money! On top of that they come as a paper pattern US size 0-20 only and PDF in sizes US 0-20 or 14-32

Jenny overalls and trousers by Closet Core these are a wide-legged dungaree pattern with a number of options including trousers. They have a fitted waistband and darts for a close fit. Available as both paper and PDF in US 0-20 only. Closet Core have a reputation for comprehensive tutorials on their website so take a look if you need any help.

Chiara trousers by Tessuti these are a wide-leg slightly cropped length trouser with darts for a close fit around the hips and waist and a side zip. The waist is finished with a stitched-down facing. Available as a PDF sizes AUS 6-16 only.

Crew trouser by Chalk and Notch These trousers/shorts do have a side zip although they aren’t flat fronted, they are high-waisted with pleats and a tie feature. PDF only sizes US 0-30 

Mountain View pull-on pants by Itch to Stitch Initially I thought these didn’t fit the brief because they appear to have a front zip but it’s a faux one so we’ll let them past. A jeans-style legging made in fabrics with stretch this is a PDF only pattern in two size brackets (you get both with purchase) US 0-20 and 22-40

Eureka pants by Fit For Art Patterns I wasn’t familiar with this brand but these trousers for woven fabrics have multiple options for the waistband and leg shape which should help you to achieve an excellent fit. Paper or PDF sizes XXS-3XL (whatever that means)

Calder Pants by Cashmerette are another good option. Wide legged in three lengths including shorts, smooth front and elasticated back to ensure an excellent fit. It comes in paper or PDF formats, sizes US 12-32 Cashmerette are renowned for their comprehensive fitting instructions which could be very useful.

Willow Trousers by Style Arc classic slim pants similar to Eve mentioned at the top. The Willow have a split hem detail and side zip. Paper patterns or PDF are both available in single sizes AUS 4-30 or multiple AUS 4-16 18-30 

Bob pants by Style Arc a tapered, ‘balloon’ shaped leg with an elasticated waistband and side seam pockets, these trousers have become a stylish choice teamed with loose shirts and casual tops for a modern look. Sizing as with the Willow above. If you like these you might also like the Ethel pants by Style Arc.

Flint trousers by Megan Nielsen a wide leg pant or shorts without a zip at all, instead they have a crossover closure at the side which is incorporated into the pocket. Printed comes in AUS sizes 0-20 or PDF 0-20 or 14-30

Marilyn Jeans by Charm patterns These are a Fifties-inspired close-fitting jeans pattern but with a side zip, think Capri pants. PDF only at present but available in two size brackets US2-20 or 18-34

Clover pants by Seamwork another pair of slim-fitting pants designed for wovens with stretch. Side zip and ankle or mid-calf length, they can also have small inseam pockets at the waistband PDF only US 0-18

Duet trousers by Love Notions these trousers have an invisible side zip, two front hip pockets, back darts and two leg shapes-straight or tapered. They are suitable for both wovens and stretch fabrics. PDF only in sizes US 2-26

Miller trousers by Paper Theory These don’t have a zip, instead they have an elasticated waist with a tie option. There are pleats in the front, deep side pockets and long darts in the back to improve the fit in this area. Paper pattern or PDF UK 6-28 

Judith wearing her brand new Millers

Free Range slacks by Sew House Seven These are another pair of slightly gathered elasticated trousers but the side seams on these have been divided and shifted to form a panel at the sides instead. They come with a tapered or wide leg option and look great in linen or similar fabric types. It’s a PDF pattern with two size brackets included AUS 00-20 and 18-34 

Kate @stitchmeayear wearing her Free Range slacks

So there we are, this isn’t in any way an exhaustive list of course, you may think there are glaring omissions, and the emphasis is strongly on Indie patterns rather than the mainstream pattern companies. These are the patterns which were suggested by the followers of Sew Over 50 so if you have your own favourites then feel free to let me know in the comments, a few of the patterns suggested were out of print so I haven’t mentioned them here. Don’t forget to tag #SewOver50 and #So50Trousers when you post on Instagram either, it’s such an amazing source of inspiration and ideas for others.

Until next time, happy sewing

Sue

Sewing the M&M Ellsworth shirt for Backstitch

The Backstitch store at Burwash Manor near Cambridge.

As one of the new team of Backstitch Ambassadors I relished the chance to go along to the gorgeous shop at Burwash Manor to browse their fabrics and patterns. It’s about 40 minutes from where I live and I love to go there whenever I get an opportunity, I’ve previously included it in this round-up of Hertfordshire based fabric shops. To be completely honest, I already had an idea that I would like to make the newish Merchant and Mills Ellsworth shirt but I had an open mind about fabric choice. In my head I was looking for a lightweight linen-type but as soon as my eyes alighted on the checked double gauze I was all in for that! It was folded on the bolt with the large check visible on the outside but when I discovered the reverse was small checks my mind was blown and I knew I could mix the two sides to create a unique garment. There are currently 4 colours available but I settled on the pretty shell pink variation. I took 2 metres as per the pattern instructions but after cutting it out (and as I’ve found before with M&M patterns) I had almost 50cms left over, even allowing for pattern matching. It’s very annoying when this happens and I’ve made a note for next time. I cut a straight UK 12 with no mods.

I loved the elliptical pearly buttons but there were only two of the pink shade left so I made do with two pink and four ivory. Backstitch have quite a wide selection of buttons, trims, and ribbons plus lots of other haberdashery and sewing equipment including Brother sewing machines.

The Ellsworth is quite typical of M&M’s aesthetic, it is a very wide and loose fit shirt with a stepped hem, a collar and button placket and cropped, cuffed sleeves. It will lend itself towards fabrics which have an element of fluidity and drape such as soft linen or cotton-types, light woollens, crepe, chambray or babycord. Some light- or medium-weight jerseys would probably be okay but I wouldn’t recommend ones with a lot of stretch. 

Another reason for choosing this shirt (apart from the fact I liked it anyway) is because I had seen a few makers on Instagram were having trouble interpreting the instructions for the placket. I hope what follows will give you a bit more information and guidance. 

Away we go…

Definitely give your fabric a wash first, its light loose weave will shrink a little (it will be very crinkly when it comes out of the machine but don’t panic, it will press flat again. You may ultimately prefer the crinkles but they will be hard to work with during the making process so press as you go for now)

If you are a person with no patience when it comes to laying up your fabric, or time is tight, then this may not be the fabric choice for you because it does need some careful laying up and folding to get the checks straight and matching [or you could cut every piece on the flat to save on the head scratching] There were a couple of places where, in spite of my best efforts I was bit off but I won’t tell you where they were and you might not notice anyway! It does have the advantage of the large check being 3cms square and the reverse is 1cm squares so a 1cm or 1.5cm seam allowance shouldn’t be a problem to follow.

The problematic placket is made first so here’s my interpretation of the instructions for you. Begin by interfacing all pieces as instructed (although I interfaced the whole placket rather than half as the fabric is quite fine and a bit unstable)

Mark the bottom of where the placket will be sewn on with tailor’s tacks or a soluble marker pen then stay stitch just within the seam allowance, at 1.4cm (14mm) to reinforce the area. For visual reference, the large squares are my right side, the small squares are the wrong side of the fabric.
Cut down the centre front line and carefully snip diagonally into the corners.
Fold and press each of the two placket pieces down the centre and then press in the seam allowance on one edge only. Trim this by half
Next, pin each unpressed edge onto either side of the slit, right sides together.
Stitch each side in position down as far as the tailor’s tacks, you should stop a little bit short of the bottom edge.
Trim down the seams by half.
Now flip the work over so that you have the wrong side uppermost. Press the seams in towards the placket piece on the left as you look at it then fold over like this, pin and tack in place. Now turn the work back over again.
Working with the right side uppermost, edgestitch the placket you have prepared.
Keeping the right unfinished placket out of the way, you need to position the left placket (the one you have just sewn) layered like so with the triangle at the base of the slit. Carefully stitch just below the original staystitching. This is with the inside of the work uppermost, neaten the edge and press downwards.
Now work on the right placket (it is on the left as you look at it though) Fold up the lower edge as demonstrated here, pin and tack in place. Edgestitch on the right side of the placket only as far as the bottom, do not sew across the bottom yet. Now work your buttonholes while the placket is still separate.
After working the buttonholes, lap the placket over the underneath one and stitch it in position like this.
You should now have a placket which looks something like this.

Next I moved on to the sleeve opening which is neatened with a very narrow bias strip.

I found the bias strip included to be incredibly narrow, especially for a fabric which is loose weave and a bit prone to fraying so you may want to cut your strips a little bit wider. I made the strips work but they were very fiddly. Instead of edgestitching as per the instructions I sewed them with a tiny zigzag which I hope will hold them firmly in place. Or you could slipstitch them by hand if you prefer. Next, fold the bias evenly in half and stitch across the top at a 45 degree angle, I’m not sure if the diagram intends you to sew through the sleeve too, I didn’t.
The way I’ve sewn it, once it’s finished, the sleeve opening and cuff looks like this.

The hem facings are sewn on next, then join the shoulders using French seams. This is a useful technique if your fabric is very fine, sheer, or frays badly, or if you don’t own an overlocker. Obviously you can sew a flat seam and overlock/zigzag if you prefer. You could also topstitch these seams if you want a bit of interest on them. My personal preference is to press shoulder seams to the front, this is so that the seam is slightly less visible when looking at it.

I found the collar instructions straightforward so I won’t go into them as well, I opted to catch the lower edge down by hand so that I had control over it and a really neat finish. I also added a label from Little Rosy Cheeks.

Inside the finished collar

The sides are then French seamed, be careful with the step at the lower edge and make sure you don’t take too much seam allowance on the seams because this could throw out the overlap at the top of the opening. I used the bartack stitch on my Pfaff to secure it as this could be a point of weakness further down the line.

I opted to sew two rows of edgestitching along the top of the hem facings, just to add a bit of interest.
Finally, the cuffs are sewn on and the buttons added.

all finished

I’m all in Merchant and Mills today, these are their Eve trousers in cream drill which I bought at their Rye store back in September 2021.

I cut a straight UK 12 with no modifications and I’m 5’5” tall but if you’re taller you might want to lengthen the shirt as it’s quite cropped at the front.

I’m very pleased with how the Ellsworth has come out, I’ve worn it with flat-front Eve trousers but it will look good with a skirt or even a dress under it for layering. I’m going to have a look through the stash to see what other fabrics I can make it in now!

I’m delighted to have the opportunity to write for Backstitch because it’s a lovely little shop which I’ve been visiting for a few years now. It’s in a beautiful rural location and sells a really nice, well-considered range of quality fabrics and indie patterns and sewing books. As Ambassadors we are provided with gift vouchers to shop in the store, it’s entirely up to us what we make and how much of those vouchers we spend, the balance can be kept to spend on another occasion if we choose to. If you don’t live anywhere near enough to pay a visit yourself then Backstitch has a recently revamped website to shop through too, their range of yarn, knitting and crochet patterns are all on there too.

I hope you have found my review useful, that’s always my intention, do write in the comments if there’s something which still isn’t clear and I’ll try to help.

Until next time, happy sewing

Sue

Sewing and other bits in 2021

Well that was another weird year wasn’t it!? I’m not gonna lie but I’ll be glad to see the back of 2021. For every good event there seemed to be two or three stinkers which I found made it really hard to see positives anywhere. I know that there were some good things though and I’m incredibly grateful to have the life that I do so I don’t want to dwell on the downside, let’s move into 2022 with an air of cautious optimism!

I entitled my round up for 2020 as ‘sewing in a time of pandemic’ and I’m so glad I didn’t know then that 2021 was going to be ‘part two!’ Anyway, I’ve collected a few photos to round up my sewing and other events I was able to get up to during 2021 although I’m not sure if they are particularly chronological…the length and colour of my hair at any given time will give you a bit of a clue!

I’ve decided that the Trend Utility pants are definitely my favourite trouser pattern of the year-I had made two pairs by the end of 2020 and finished a third, in orange linen, in spring 2021 and I’ve worn them all fairly constantly. I find them interesting to make, they aren’t a completely straightforward sew and need a bit of concentration but they are all the better for that. The leg flaps are their USP and they are a design feature that make me very happy!
I was wearing them in the late summer when we finally escaped with one of our daughters on a week’s holiday, along with another favourite, the Maker’s Atelier Holiday Shirt.
The orange linen pair were perfectly autumnal at Kew Gardens in November, and the colours were absolutely stunning.
This hacked Sewing Revival Heron dress was one I finished in 2020 but wore a lot in 2021, and will do in 2022 as well.
I’m still not convinced about the ribbon bow but I haven’t actually done anything about changing it.

I was looking for new sewing challenges early in the year during the next long lockdown and Mr Y was the lucky recipient of a few items including this Carmanah sweatshirt by Thread Theory. The fabric was kindly provided for me as I’m part of the Lamazi blogger team.

This is the Thread Theory Finlayson sweatshirt I made for Mr Y at the start of the year and he’s worn it on heavy rotation. These items of menswear led to me writing an article for Love Sewing magazine about sewing for men, and by men, in the spring and I joined Maria at Sew Organised Style podcast to chat about it too.
Mr Y celebrated his 60th birthday quietly at home in March, we both wore hand-mades!
…and we celebrated a second wedding anniversary in lockdown too. Cabin fever had taken hold a bit as I dug out my wedding dress and flounced around the garden in it! I really hope our 33rd anniversary this year can be outside of the house!!
Let joy be unconfined because mid-March saw us going for our first vaccination and I wore entirely hand sewn garments to mark the occasion, including a Holiday Shirt, a Nora sweatshirt and my self-drafted rain coat.

I was selected to contribute some articles offering sewing tips and advice for an online sewing project in the early spring but after just two such items they just stopped contacting with me or replying to my emails. Bit rude I’d say, I’ve no idea what was wrong because they never had the courtesy to tell me, and I’ve no intention of wasting more time on them frankly.

Moving on…

Lucy at Trend generously gifted me the kit for the Box Pleat shirt from her capsule shirt collection. Like all her patterns it is so well drafted, I should have gone down at least one size though (my fault for being overly-cautious) There are currently three patterns in the shirt collection but I know there are more in the pipeline.
I only made two Minerva projects in 2021 and this Tabitha dress from Tilly and the Buttons book ‘Make it Simple’ was one of them. I really like the Art Gallery fabric and I’ve had plenty of wear from it.
I was so happy to see my dear sewing chum Claire after far too long at the Alice in Wonderland exhibition at the V&A in the summer. It was an interesting show although I suspect we nattered all the way around it! [it seems there was a ‘wear checks’ memo sent out too!]

As you know if you read my posts I like to reuse patterns if they have lots of options so I’ve sewn several variations of a number of Sewing Revival patterns during the year, including the Fantail top below which I made in an ancient remnant in my stash which I believe somebody once paid 90p for!

The wide elastic casing in the front hem is such an interesting detail.
This is another version of the Fantail featuring jersey cuffs and back hem.
This Sewing Revival Kingfisher top was made using the fabric from a summer dress which I never wore. It’s been a satisfying project because I worn it often (I‘d had a haircut by this point too!)
I enjoyed the challenge that this Heron adaptation presented because I used linen jersey provided for me by Lamazi fabrics. It was a learning experience and I shared lots of hints and tips in the accompanying post. It’s been such a lovely fabric to wear, it’s very comfortable and it has a beautiful sheen which is not particularly obvious in this photo.
I made another pair of Simple Sew Palazzo pants in a linen remnant I bought from Lamazi, they are comfortable and very nice to swoosh about in! That’s a M&M Camber Set top with them.
I sewed a third version of the Trend Bias T-shirt dress which I made specifically for an occasion at Capel Manor College in north London when the Japanese ambassador to the UK came to plant cherry trees. I’ve only had a chance to wear it once so far because the weather was getting colder but I have every intention of wearing it a lot in 2022-you know I love a floaty dress and this pattern is perfect for that!
I managed to get an outing to the Fashion and Textiles in the autumn to see ‘Beautiful People’ and it was well worth it because the colours and fashions were so uplifting.
One of my personal favourite posts of the year was this one where I had rediscovered lots of my college work and sketches from the 1980s. It was so much fun to find them unexpectedly and it seems it was a trip down memory lane for many of you too.

I wrote just three specific Sew Over 50 blog posts in 2021, the first was a summing up of lots of ideas and inspiration for how to sew more sustainably which the followers of the Sew Over 50 account contributed. There was a lot of it and it definitely worth a read.

Judith Staley joined Maria on the podcast to chat about it too.

I was a guest editor on the Sew Over 50 account in the autumn when we chatted about mannequins in our sewing practice. Many of you contributed some brilliant and insightful comments, I wonder how many people have gone on to buy a dress form, or use the one they have differently, or more often, as a result?

Sew Over 50 stalwart Tina generously shared with us the many resources she has gathered together over the last couple of years for sewing and adapting patterns and clothing after a breast cancer diagnosis. It has been one of my most read articles on the blog since it was published in the autumn and I know Tina is happy for followers to contact her via Instagram for any advice or support she can offer them. For me, she very much represents the positive aspects of being a part of this worldwide community.

One of my favourite ‘in person’ events in the sewing calendar, Sew Brum, quietly took place in the autumn and my lovely mate Elizabeth kindly put me up overnight and we had some quality shopping and sewing time together. Our friend Melissa even joined us for a couple of hours for a Zoom sew! Plus I ran in my first (and so far, only) Park Run too! phew, it was a busy and almost-normal 48 hours.

We got VERY wet at the Park Run but we earned extra smug points in our me-made Fehrtrade running kit! [I wrote a post about the Tesselate Tee that we’re both wearing here]
I didn’t even buy any of this green fabric at Barry’s in the end…

I finally made a jumpsuit (or two) at the end of the year, it’s the Cressida by Sew Me Something Patterns.

I made this second one to wear at the first Lamazi open day in November. It was so much fun to be a part of and I really hope there will be the opportunity to hold more events during 2022 because it so good to meet up with people in person and to just chat about sewing all day.
This was fun outing to the V&A that actually happened rather than being cancelled like so many others, it was an in-person talk by Oscar-winning costume designer Sandy Powell and it was absolutely fascinating. I’ve really missed these talks in the lecture theatre and it was great to be back.
Being an actual grown-up at a fun event!
I splashed out on this unusual quilted fabric from Merchant and Mills and sewed it up into their Fielder top plus I wrote up a blog post on how I made the too-wide elastic fit around the neckline.
These Eve pants are also a Merchant and Mills pattern and they became my second-favourite trousers of the year, made in their Elinore checked linen and worn with a long-sleeved Holiday shirt in Swiss Dot.
This second Hug hoodie of the year by Made It Patterns is definitely one of my favourite makes of the year. It looks tricky but is very straightforward to sew and the style lines look very effective.

For quite a while I had wanted to organise an informal sewing event and they were finally able to happen in October and November with #HertsSewcial It was such a joy to be reunited with my Sew Over 50 stalwart friends Ruth and Kate, along with meeting several other online friends like Bev and Elke in real life for the first time. We had so much fun sewing and chatting together, the time flew past far too quickly and I very much hope I can organise some more in the New Year, current situations permitting.

Can you tell that Ruth, Kate and me are happy to see each other again after far too long!?

And my final sewing treat of the year was being able to meet up with Judith Staley in her hometown of Edinburgh!! It was much too brief but absolutely better than nothing, we had so much we could have talked about but that will have to wait until our oft-rescheduled and much looked forward to sewing get together next spring…fingers tightly crossed!

My final personal make of the year was another Maven Somerset top in this celestial jersey I bought at the Lamazi open day. It’s festive without screaming CHRISTMAS!

And so ends another year of sewing and other stuff, as well as the new garments I’ve sewn for myself there were many other occasions when I wore, and re-wore, favourites which didn’t need to be photographed! I fervently hope 2022 brings better times for everyone and that we can adapt to our new or changed ways of living. Sewing will continue be a big part of my life and I hope there will be some new and exciting projects and opportunities during the year. There are so many wonderful people in this community and the support and encouragement that swirls around has been so important during another trying year-I hope I will get a chance to meet up with more of you in person during the next twelve months.

Until then, thank you for reading my wafflings, happy sewing and a very happy New Year,

Sue