First a bit of preamble, because the origins of the fabric I used for this top were important. In June 2022 me and Mr Y were finally able to return to mainland Europe again for a four day stay in Florence, one of my favourite cities. We knew it would probably be very busy with visitors during the summer but frankly I didn’t care about this, I was just so happy to be able to see all those magnificent buildings and beautiful art again.
In between looking at the art and strolling the ancient streets I indulged in a little window shopping at the stores where I can afford literally nothing, including Alexander McQueen, Missoni and Gucci.
Amongst all these shops though I *may* have come across a fabric emporium….In truth, there are quite a number of fabric shops in Florence, what with this being Italy and home of fabulous quality textiles.
I had, however, been given the name of another more accessible shop by a kind Instagram follower so we set off to find it with only the vaguest idea where it was. Bacci Tessuti is quite close to the Medici Chapel and San Lorenzo and, with a little help from Google Maps, we found it eventually.
The air-conditioned shop was a very welcome haven from the extreme heat Florence was experiencing during our visit and I was not disappointed by what I found, there is a wonderful selection of lovely cloth to browse.
The choices in a beautiful store like this can be quite overwhelming so I had a sort-of plan to buy something which felt ‘Italian’ to me. I set out looking at their fine linen, personally I would call it handkerchief linen and it’s much lighter and softer than most of the heavier and more durable linens I’ve seen on sale in the UK. I homed in on one with a large design in blue, red and pink flowers (I love a floral fabric but I don’t often wear it) but this one ’spoke’ to me. So that was great but then the helpful shop manager, who spoke excellent English, pointed out the Liberty Tana lawn he had at a very good price! I would have resisted but my husband wanted to buy some for me so who am I to turn him down!
These were going to be my total purchases but when I went over to the counter the manager told me that the linen cloth was by the textile designer for well-known Italian brand, Pucci. At this point he produced from under the counter several short length pieces of some beautiful Italian designer fabrics including Dolce and Gabbana! They were all very lovely (and still expensive) but I wouldn’t have a use for them. The one I did fall for though was a small piece of silk/cotton cloth from Pucci with their trademark psychedelic design in delicate ice cream shades. It still wasn’t cheap but it was just a bit different and there was enough to make a top of some kind. So of course it came home with me…
With my purchases safely stowed away we got on with enjoying the rest of our holiday (although I spent a fair bit of time planning in my head what I was going to make when we got home!)
As I said earlier, I had no more than 1m30 of fabric to play with and I still wanted to do a decent job of matching the print as best I could. The basic pattern fitted on the fabric, it’s only a front, back, sleeves and facings, but I thought it might look a bit meh, and there would still be some wastage. After a bit of a rethink, by shortening the body and making two deep ruffles across the width of the fabric I knew I would get a much more interesting design and have very little wastage in the end.
Basically it was a case of working out how long I could afford to make the top section and still get ruffles that were a balanced length [I had the Merchant and Mills Florence top in my head as inspiration] I took a line horizontally straight across to the centre front/back from the side seam approximately 15cms down from the bottom of the arm scye of both the front and back. What I should have done if I had stopped to think about it was make the centre front longer, I didn’t though and as a result the front hem lifts up because of my bust. The back is fine though.
I was able to cut the front and back pieces side by side on the folded cloth which meant the design ran smoothly around the garment. From the remaining fabric I calculated how deep two full widths of the fabric could be (approximately 28cms each strip) and still have enough to get two sleeves and the neck facings out too.
Once I had all the pieces it was just a case of assembling. First I did my usual scavenge through my button boxes to find enough suitable colours in matching sizes. After joining the shoulder seams and attaching the neck and back facings I sewed all the buttonholes at this stage, by doing this first it meant I wasn’t fighting the bulky seam of the gathered ‘skirt’ later.
As for the other Italian fabrics, I have plans to make a shirt dress with the beautiful linen, I have a design I’ve drafted and sewn a couple of versions of but there’s probably still a few tweaks I want to make to it before making it in the ‘real thing’. The Liberty lawn is waiting for the right project to present itself too, no need to rush these things. I’m all for sewing the good stuff but it’s really upsetting if you sew a dud with it!
I haven’t shared a museum or gallery visit with you in such a long time (for sadly obvious reasons) but, at last, I’ve been to one that is probably worthwhile to write about because you may have time to visit it for yourself if you’re within reach of London!
‘Beautiful People: the boutique in 1960’s counterculture’ is the latest exhibition to open at the Fashion and Textiles Museum in Bermondsey, London. I went a few days after it opened and there was a lovely ‘buzz’ to it because a good number of people were there (but not too crowded by any means) and a great backing track of familiar Sixties music to accompany it.
Boutiques were an entirely new concept at the start of the Sixties, before then young people were pretty much obliged to dress exactly like their parents and shopping for clothes, if you didn’t sew your own, was a very dull affair in traditional gents outfitters or snooty ladies dress shops. All of that began to change when Mary Quant opened Bazaar, her first London boutique and many others soon began to follow suit (pardon the pun!) Clothes shopping became a fun and sociable activity, trendy boutiques with exciting interiors, pumping music tracks and fast-changing, attractive merchandise became more commonplace.
Both young women and men started to break away from the constraints of very formal fashions prior to the early Sixties and young men in particular embraced much less starchy ‘masculine’ designs with many bright colours and shapes and new fabrics coming into their wardrobes. Women of course were already embracing miniskirts with wild enthusiasm.
Moving on through to the main part of the exhibition, it is set out with examples of garments from a number of the boutiques which were most notable during the Sixties. Often they are in high-cost areas of London such as Chelsea or Knightsbridge, and were owned and run (with varying degrees of financial competence and success) by the wealthy offspring of British landed gentry. The information notes made me laugh because they describe how dark, noisy and shambolic a lot of these shops were, with stock all over the place, inconsistent supply and poor quality of the stock, they weren’t intended to be welcoming if you were the ‘wrong sort’ of shopper! Some were barely shops at all, just a space to hang out with your friends that had a few clothes draped around it (like a teenager’s bedroom…) If Daddy was underwriting the venture it didn’t much matter how successful it was!!
Moving upstairs there are even more examples of the fashions from the decade, it was interesting to see the more fluid shapes here with possibly 1930s and 40s influences, certainly different from Mary Quant’s simple colour-blocked shapes at the same time.
To sum up, this is a show that any generation can enjoy because there are so many great clothes on show. I’m not old enough to remember much of the Sixties but that didn’t matter-I enjoyed overhearing some of the women chatting who clearly were there though! The show is on now until March 13th, booking is recommended although I didn’t and took a chance on the day. FTM is a small independent museum and I always enjoy a visit there, White Cube art gallery is a few minutes walk further down the road plus there is a glass blowing studio nearby which is open to watch the artisans at work so there’s much to enjoy in the area. It’s so close to the river too which is a bonus.
It’s wonderful that museums and galleries are now reopening and they need our support if we can offer it as we emerge from the pandemic. The ones I’ve visited so far have felt safe and not too crowded, numbers are limited and booking is definitely advisable if you’re making a special trip, and the opening days may be more limited too so check their websites.
There’s been quite a lull in my sewing and blogging of late due to a distinct lack of motivation and generally feeling meh about everything. I don’t know about you but I’m utterly cheesed off with the persistence of the ‘Rona and, whilst I really try to find the positives as much as I can, there comes a time when I’m all out of good thoughts.
Anyhoo, I’ve finally managed to get my act together and to cut out and sew something which is worth blogging about!
You’ll know I use The Sewing Revival patterns a lot, and especially because they are SewOver50-friendly in their representation. Janine kindly offered me a copy of the new and improved Kingfisher top recently so here are my thoughts on it. The original version was one of the first in the Sewing Revival collection and it now features extra variations including 3 sleeve lengths and additional ruffles and frills to gussy it up.
Initially I’d settled on using a length of fabric I bought recently but in the end, whilst searching-sorry-shopping, my stash I came across a length of batik-printed lightweight cotton which had originally been a dress. I bought it as a remnant which was in two different-sized pieces pieces so I joined them right across the weft to make it useable. From that I turned it into a simple ‘pillowcase’ dress with a gathered drawstring top and hemmed at the bottom. Needless to say, this being England, I didn’t get a massive amount of wear from it because our climate is so unreliable. Sadly I don’t seem to have a photo of it now so you’ll just have to believe me.
The Kingfisher has raglan sleeves which are always so nice to make because they are simple and quick to construct. One of The Sewing Revival’s trademarks is to mix a stretch neck band, cuffs or hem with a woven fabric and this top features a ribbed, rounded neck band. But first I had to get all the pieces out of a length of fabric with a join across it at about 50cms in, plus a tear at right angles to the selvedge in another place AND a small hole just near that! I calculated that I could get a pair of 3/4 length sleeves but one would have to have the seam running horizontally across it. Another new feature of the Kingfisher is additional small ruffles to add so, instead of placing them vertically on the sleeves, I opted to cover the seam with horizontal ruffles, that way way both sleeves would look the same. After a bit of pattern Tetris I got everything I needed out including the ruffles. I started by making the sleeves.
Because of the limitations of the fabric the ruffles were only 5cms wide so, in order to lose as little of their width as possible, I finished each edge with a rolled-hem finish on the overlocker. Check your instruction booklet because I’m sure many models will offer this feature, it will involve a few simple adjustments to the settings to achieve. A rolled hem is a quick and attractive way of neatening fine or lightweight fabrics when you can’t afford to lose too much off the edges.
I created a cuff to finish the sleeve ends by cutting two pieces of fabric from along the selvedge and sewing them on. My original plan was to create an elasticated cuff using a casing but then inspiration struck(!) and I sewed three rows of shirring instead.
Shirring works best on lighter-weight fabrics such as soft cotton-types [lawn, batiste, voile, Swiss Dot, pique, poplin if it isn’t too stiff] also most viscose/rayons, many silks, and fine woollens such as challis. This isn’t a definitive list by any means, basically nothing too thick, or stiff or overly ‘bouncy’. As with anything you’re unsure about I’d strongly suggest sewing a few samples first to see how it goes.
To begin (and these are very much my own thoughts on shirring, you will find many others which might vary to these-trial and error before you startis the best plan of action) you ideally need a bare minimum of 1.5x the eventual finished measurement but as a rule of thumb I would say at least 2 or 2.5x your finished measurement, especially if the fabric is very fine. I also wrote advice on shirring the back of a sundress in a previous blog post which you can still read here.
I cut this top in a UK10 so it’s a closer fit than some tops I’ve generally made but I’m really happy with the fit, there’s still ample room for comfort and movement. From a fabric that was languishing in a box I’ve concocted a casual top I can wear in warmer or cooler weather.
Thank you to Janine for providing me with the pattern, I hope my review will be helpful, for a such a simple shape there are so many possibilities with it. If you haven’t tried any Sewing Revival patterns I’d definitely suggest you pop over there and take a look, and if you choose to follow any link I’ve created in this post or previous TSR ones, and you then make a purchase, I will receive a modest fee from it. You can also read my previous reviews for the Sidewinder pants, the Heron dress plus a hack, the Bellbird top and the Fantail top and it’s follow-up. If you want any more inspiration use the hashtag #KingfisherTop on Instagram or Facebook. I’ve got plans for a deep-cuff version later in the year, just so long as I don’t have another creative slump…!
Welcome back and thanks for reading this far, I’ll try not to leave it so long next time!
Did you keep any of your old college course work? I am by nature something of a hoarder but even I was surprised when an unpromising cardboard folder came to light recently while we were having a grand clear out. It said “Russia 1980” on the outside so I was excited to think that it contained some memorabilia from my school trip of that year [The trip caused some local controversy at the time because that year the USSR had invaded Afghanistan just a matter of weeks earlier and some people felt we should no longer go. Our Head Mistress, the doughty Miss Pagan, was having none of it so we went regardless! Many countries boycotted the Moscow Olympics later that year in protest…about the invasion, not because my school trip went ahead]
I digress, upon opening the folder I found it contained nothing of that trip at all but it did contain many of the sketches and designs I produced whilst at London College of Fashion between 1983-85 including the final project when I produced two ‘mass market’ bridal outfits. Well what a trip down memory lane they proved to be! It was a period of my life when I was so happy with what I was doing, I’d finally found the right course for me (technical garment construction and not just design) I had a great bunch of college mates, I loved it.
I’m sharing the sketches partly because then I’ve documented everything for my own reference and enjoyment, but also because I hope there might be things of interest to others as well. Fashion-wise the early eighties were a time of puffball skirts and massive ruffles, enormous sleeves and ra-ra skirts, wide collars and even wider shoulder pads! Princess Diana was the style darling of the fashion magazines and whatever she wore became a trend. Last year I shared lots of press clippings and photos from my early working career which you can still read here.
What follows are the design and development sheets for an evening wear module [you can see now why it’s my first love when it comes to making] We had to design variations of similar dresses and gowns to illustrate how a garment could be adapted and simplified to cater for it’s appropriate market.
For my final project I opted to make two bridal outfits, I’m guessing they were mid-range and the jacket and skirt was probably intended as a register office outfit whilst the ‘Laura Ashley” dress and jacket was probably for a simple church wedding or registry office. I had a real client for the suit which was my then-boyfriend’s sister. This was handy because she paid for the fabrics for it, the jacket and skirt were white crepe-back satin and the blouse underneath was a soft green georgette. I think my ‘brand’ was possibly Jacques Verts who specialised in smart workwear for the modern working woman (definitely power shoulder pads with everything) or mother-of-the-bride type outfits with matching everything, dresses, jackets, hats, bags, shoes, the lot.
Laura Ashley were hugely popular in the Eighties with their feminine and floral styles, they also produced a range of dresses for brides and bridesmaids at reasonable prices so that will be why I picked them as my brand for this project.
Well, there we are, another wander back into the past for some Eighties fashion extravagance. You’ll see why I probably won’t embrace the current trend for wide collars because I did them the last time around (although fabulous sleeves will always hold an attraction for me) we were all busy being New Romantics but that Steve Strange eye make-up was difficult to pull off with glasses!
Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.
Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.
I’m beginning here with a faced hem…
The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.
If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.
The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.
If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.
I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.
For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.
If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.
I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.
I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.
The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.
Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.
Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.
If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.
This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.
I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…
To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.
This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.
I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!
I had a client recently who I did a few alterations for initially but then she asked me if it was possible to replicate a favourite dress she had. It was a tiered sundress in plain cotton with a shirred back panel.
Of course, said I.
It was very straightforward to measure the skirt panels, there were three tiers of almost identical length, each layer was more full than the last, plus a small ruffle on the hem. Next I took accurate measurements of the bodice front and drew a ‘plan’ plus the shirred back. I haven’t made anything using shirring in years and it was going to be guesswork a bit but I found a really helpful tutorial by Seamwork magazine on You Tube which gave a few good tips.
Once I’d got all my notes and diagrams I could calculate how much fabric my client would need, I also gave her advice on what sort of fabric to choose. She was going on holiday in less than six weeks so a speedy decision was needed. I saw three fabrics in our local John Lewis branch which I felt met our requirements so she hot-footed it into there and bought all that was left of a 100% cotton poplin in navy.
As the skirt is a series of rectangles I made that up first. I used the longest straight stitch for the gathering which I divided into manageable length sections-don’t be tempted to sew the whole of a very long strip of fabric in one go, break it down into manageable sections because if one of your threads snaps you’re back to square one.
I decided to toile the bodice front so that I could be certain it was correct as I knew there was no option to buy more fabric if I got it wrong…and I’d got it a bit wrong! The cups were much too shallow and didn’t come far enough up my client’s bust and a lot of her bra [which she wanted to be able to wear underneath] was showing. Back to the drawing board. The shirring element however was fine. I didn’t know exactly how much I might need so I used the full width of the fabric and sewed lots of rows of shirring until my reel of elastic ran out! [If you’re using an actual pattern then it will hopefully give you more guidance than this!]
Wind the shirring elastic carefully BY HAND onto a bobbin, use regular thread on the top. You could draw on your parallel lines first if you wish or you could trust your own skills and use the edge of the presser foot to guide each new row. The shirring doesn’t look like it’s gathered up enough but a good going over it with plenty of steam causes it to shrink up beautifully.
Because the first bodice didn’t give enough coverage I redrafted it but that was worse (I didn’t even try it on my client as I could see it was all wrong) On to Plan C…I decided I would try modelling the pattern on my mannequin so I pinned some very narrow black ribbon to the mannequin using the style lines I required. You only need to do this on one half if it’s going to be symmetrical, make sure you start at the centre front working round to wherever the pieces finish, in my case this was just to the side seams.
I joined this new bodice to the skirt and the shirred back and carried out another fitting on my client. Fortunately this time it was fine and I set to to finish the dress just in time for her to take it on holiday!
I made the straps wider than the originals and they are stitched to the correct length on each shoulder for my client-we all have one shoulder higher or lower than the other so don’t automatically make them identical lengths, pin and check before sewing them in position. If one strap always falls off your shoulder this will be the reason why!
This was a rather convoluted way to make a shirred sundress because my client wanted a replica of a favourite but if you like the idea of it the why not take a look at Cocowawa’s Raspberry dress pattern which has a fully-elasticated bodice instead?
My client wanted fabric as similar as possible to her original but you could easily use cotton lawn, seersucker, chambray, soft linen, lightweight jersey, voile, muslin….the list goes on, just keep it soft and not too thick or it could get very bulky. You could also make it just as a skirt and leave the bodice section off if you wanted, that’s definitely a 70s hippie vibe going on right there, add ribbons, ric-rac, bobble trim, sequins etc etc…
I think this used to be a much more popular thing to do years ago, probably because wedding dresses were home-made more often and the fabric would have been quite a costly part of the finished article. I’ve made a couple of Christening gowns in the past (although sadly for complicated reasons not for my own girls) but this is the first time I can recall cutting up an existing dress for a refashion.
I got a message early one Sunday morning just two days after we got back from holiday recently asking if such a thing were possible and also I’d have less than three weeks to do it in! Fortunately the client was able to come the next day so we got cracking very quickly. She had an idea of what she had in mind so she showed me a photo and we went from there.
Although the dress was from five years earlier it hadn’t been cleaned so the skirt, and the hem in particular, was very soiled. I took the whole skirt off the bodice, and also the skirt lining, plus the embroidered lace appliqué panels which came off the bodice and skirt. I was able to wash the lining but I couldn’t risk washing the Duchesse satin of the dress so I had to separate the front skirt panel (which was asymmetric) from the backs and then work out where the straight grain was so that I could cut a new front skirt piece from the cleanest area. To work out where the grain is you can tell to some extent by pulling gently in each direction on the fabric. If there’s some degree of stretch (in a non-stretch fabric) then it probably means you’re not on the straight grain yet but if there’s little or no stretch then you’re probably pretty much on it. To double-check after doing this I cut along the edge of the piece on what I’d calculated to be the grain and then pulled a few loose threads away until eventually I could see exactly where the grain was. I could then place the pattern piece onto the fabric with a good degree of certainty.
As I never throw a pattern away I have a number of children’s patterns which I used when my own girls were small so I simply used bodice pieces from one of these. The client wanted an over-long skirt so I merely created a flared A-line shape to the length needed. She wanted small ruffles at the shoulders instead of sleeves and these are very simple to draft. I drew a line on the bias (a 45 degree angle) and then a curved line which measured approximately twice as long as the sleeve opening it was going into. The curved edge is the one which you then run your gathering stitches along to pull it up, the straight edge is the one which gets neatened, or in this case had new narrow lace added to it.
After our initial discussions and sketches it wasn’t practical for the client to keep coming backwards and forwards constantly so we conducted the rest of our consultations via WhatsApp because it was a good way for me to send her photos of ideas for her approval.
The appliqué was too much for the tiny bodice, the baby is only ten months old, so I tried it on the skirt instead.
I suggested that the appliqué should be towards the hem because then it would show better in photos if the baby was being cradled or sitting on a lap. Once we’d settled on the position the lace had to be sewn on by hand.
I wanted a deep hem on the skirt rather than a narrow rolled hem because a rolled hem would have had a tendency to curl up on this fabric and not look nice. Because of the curve of the hem I couldn’t just turn up a hem of 4cms because there would be too much bulk that would look very clunky and no possibility on this fabric of steaming it away. Because of these factors I opted to make some 8cms wide bias binding from the Duchesse which, after I’d joined it into suitable length strips, I folded in half lengthways and pressed. I placed the cut edges against the hem of the skirt and sewed it in position. Next I pushed the seam allowances towards the binding and understitched it about 1mm away from the seam.
It was a then a case of putting all the pieces together, along with fully lining the gown. We went with two rouleau strips across the front, which I secured into the side seams, along with the loops for the back which would tie into a simple bow. The skirt was gathered into the waist seam and an invisible zip inserted into the back. I finished the neck edge with a simple bias binding, to keep it very soft and simple around the baby’s neck.
One final detail the client had asked for was her baby’s name and the baptism date embroidered inside. Fortunately my Pfaff Quilt Ambition 2.0 has a range of script options so I did a couple of test runs. I stabilised a piece of the satin and then embroidered the words onto it. I added some more of the narrow lace around the edge and finally satin-stitched it inside the skirt lining. Maybe one day there will be other names alongside it, that would be nice to think.
I really enjoyed this project as it was so creative and was real contrast to most projects I undertake. The client was absolutely delighted, and not a little emotional, when she came to collect the gown. You have to put a lot of trust into a dressmaker, especially when you’re handing over a garment which is itself has precious memories. I’m looking forward to seeing photos of little Poppy in her gown eventually, I hope she doesn’t disgrace herself!
Designing by WhatsApp might be unorthodox and have its limitations but it worked a treat this time. Have you ever had to refashion a wedding dress into a Christening gown? Maybe you’ve done it yourself?
My latest Minerva blog post is on their website from today and it’s a bit different from the others. This time I used a soft and fluid jersey to make a dress for my younger daughter Katie, not me.
In the post I explain how I wanted to use a single pattern [Simplicity 8602] which, ultimately, I’ll adapt for 3 of us in my family-24 year old Katie, my 84 year old Mum, and me. The first two are done, the version for me probably won’t happen for a while yet though.
Katie made life a bit difficult for me by wanting the blouse lengthened into a dress, plus altering the sleeves AND the neckline. I’ve written up all the details in the post if you’re interested in finding out how I did it.
I hope you find the post helpful and you can read it here.
The Camber Set from Merchant & Mills has definitely become one of my go-to patterns for tops-I’ve made 4 now! I picked up the pattern early last year at a swap/meet up (it was the same meet up that I got the Maker’s Atelier Holiday top pattern too which has become another favourite, I’ve made 3 of those and blogged reviews of them here and here)
The first was a navy and white striped one in a linen-look viscose if I remember correctly- I bought it at least 20 years ago to make my Mum a dress but life intervened! What I’ve come to love about this pattern is the clean and stylish finish to the neckline. The front neck uses a strip of bias binding which is applied to the reverse and then brought over to the right side and top stitched.
Next there’s a yoke at the back which is stitched in such a way that it neatens the back neck and encloses the shoulder seams all in one go. The instructions and diagrams are very clear but you do need to concentrate the first time because it seems a bit alien but trust me, it’s worth it. I had the bias on incorrectly initially because I assumed that it was turning in the usual way to the inside (it wouldn’t matter if you did it like that though, it’s just you wouldn’t then have the effect of the binding as decoration)
I chose to contrast top-stitch some of the seams and the bust darts too for some visual interest.
I cut a straight size 14 based on my measurements and it’s just right, roomy enough to be comfortable without being too baggy. I would say that it’s an afternoon’s work if you make it exactly as the pattern.
The second one I made in more of a hurry to take to the second Sewing Weekender last August. This time I made it in some coral crepe-de-chine from my stash and made the bias and yoke in a contrasting butterfly crepe-de-chine which had been supplied by Adam Ross fabrics in the goody bags at the first Sewing Weekender! I mixed it up a bit by adding a small inverted box-pleat to the back.
The third version is a very straightforward plain ivory crepe (from Hitchin market I think) with no alterations. I love a patterned fabric and plain tops are not something I have loads of, I used to wear RTW T-shirts but I just don’t anymore so they need replacing with alternatives. I got cocky though and did the binding the wrong way round so it’s a bit narrower than it should be.
My most recent version of the Camber is a bit special IMHO. Recently I went with my friend Janet to Goldhawk Road to look for fabric for me to make her daughter a dress to wear to Janet’s son’s wedding (with me so far…?) Naturally I had a look at a few things myself but then in Misan I had some kind of out-of-body experience because I spent an ABSOLUTE BOMB on some Roberto Cavalli printed cotton lawn! I’m not even going to tell you how much it was, I’ve never paid that much per metre for any other fabric before, there was just something about the vibrancy of the colours and the prettiness of the design, plus Janet made me do it, she never even tried to stop me!! It’s a pity the photos don’t do it full justice though. [Misan also has 2 fabulous shops in Soho if you really want to blow the budget]
I bought 1m20 with a plan to make a Camber. With some really careful cutting (annoyingly there were two fairly wide unprinted white strips along each selvedge) I managed to get everything out so that the colours ran in ‘stripes’ around the body and on the sleeves too-this always pleases me immensely when I can achieve it-I was also able to add ruffles to the sleeves this time.
The although the fabric is 100% cotton it has a fair bit of inherent stretch which meant it had got a bit wonky from where I’d hung it on the washing line-a good steamy press largely sorted this out though. Basically I did everything the same as usual (except I really concentrated on the neck binding!) Instead of sink stitching the back yoke facing (that’s ‘stitch in the ditch’ in old money) I used one of the embroidery stitches that my Pfaff Quilt Ambition 2.0 offers. I chose one that’s fairly similar to the print on the cloth to complement it and used lemon yellow thread. I also added some small pleats to the back below the yoke.
I made the sleeves a fraction longer and added the ruffles, which I hemmed using the rolled hem finish on my overlocker. I’ve been trying to use this feature on suitable fabrics more often recently because it’s pretty and makes a change from a regular hem edge.
I can’t wait to wear this, we’re off to Italy very soon and I’m going to wear it with white linen trousers (RTW ones sadly, I bought them when time ran out for making last summer) The photos don’t do the fabric and the colour justice at all but I think it’s going to be a summer favourite, it isn’t even my usual colour choice either!
This is the only M&M pattern I have, their aesthetic is very pared-back and utilitarian and not necessarily my thing but as you can see a variety of fabrics can make a simple style look very different-I don’t think I’m done with this pattern yet, I haven’t even made a dress version yet!