My second Lamazi blog post

Much as I’m a big fan of sewing and wearing dresses, I do love separates too, especially tops. I think this version of the Amaya shirt by Made My Wardrobe may just have gone to the top of my favourites list! [Full disclosure, Lydia offered me my choice of one of her patterns as a PDF with no expectation of a review and I selected the Amaya with its gathered neckline, raglan sleeves and full floaty cuffs] I printed it off but then didn’t start it for a while until the ‘right’ fabric came along.

As a Lamazi Fabrics blogger we each volunteer for a number of slots throughout the year but Liana was short of a post for early August so I offered to do it. I thought the Amaya would be a good option as it’s not complex and I could probably sew it quite quickly to meet the deadline. When my eyes fell on the beautiful printed Broderie Anglaise I knew I had my perfect match! 

When the fabric arrived it was absolutely gorgeous, so soft and pliable. Broderie Anglaise can often be quite stiff and crisp, which may be what you want, but I’ve also found it to be a disguise for a cheaper quality cotton fabric with lots of dressing or starch in it so do be slightly wary of very cheap Broderie Anglaise. This version is a printed soft cotton lawn which is then embroidered, there are lots of eyelets so personally I’ll probably be wearing a plain-coloured RTW camisole underneath as no one needs to see my undies or midriff thank you! This specific fabric does not have an embroidered edge which some Broderie Anglaise does, and also be aware that the embroidered part of the fabric doesn’t run right up to the selvedge, this is normal with this type of fabric. On this particular fabric there’s a wider gap down one side than the other so you may find the useable part of the fabric isn’t as wide as you would think. In other words, don’t scrimp on the quantity of fabric when choosing Broderie Anglaise for a project because you could find yourself a bit short by accident.

I opted for a UK size 14 with no modifications according to my measurements but I think I will go down a size when I make another, the fabric you choose could make a significant difference to the finished look so a soft and floaty georgette or silk crepe de chine for example would look divine with plenty of volume but a firm linen, or a cotton poplin could give you the appearance of a ship in full sail! (that may, of course, be the look you’re after!) 

This fabric has a one-way design but I chose to turn the upper sleeve pattern piece to interlock better and make it more economical to cut out, I really don’t think it’s that obvious on the finished garment, always worth checking though! 

It’s pretty well impossible to see snipped notches or even triangles on this fabric so, in order to tell the front of the sleeve from the back, I marked the single and double notches with long thread tacks and this seemed to work well.

I used a French seam finish on the cuffs but found there wasn’t any particular advantage to doing this, for the rest of the construction I sewed regular seams and overlocked them together. 

The pattern calls for interfacing to be attached down the centre front seam to stabilise it but I chose not to do this as it would show through the eyelets, I simply neatened the edge of the self-facing with the overlocker. I had a rummage through lots of the miscellaneous trims and ribbons I’ve had from past projects and tried a few ideas out with them but in the end I only used a white cotton trim down the front and simple edging lace on the sleeves, I would have used this on the hem too but there wasn’t enough, more on that later. 

I added a triple zigzag stitch to embellish the sleeve ruffle seam too.

The neckline is gathered up into a bias-cut band but instead of cutting it on the bias I used a straight strip of the printed lawn from near the selvedge. I did this because a bias strip of such holey fabric wouldn’t have worked well at all, the one drawback of the tie being cut on the straight is that it doesn’t curve around the neckline quite so smoothly but it’s fine. The tie is topstitched close to the edge so, to match the sleeve, I used the triple zigzag stitch again. 

Finally I had to finish the hem, I could simply have turned up as per the instructions but I wanted some kind of pretty finish to echo the cuffs. As I didn’t have enough of the sleeve trimming, or any other edging lace which I felt worked alongside what I’d already used, I opted to try out one of the satin stitches which my Pfaff machine is capable of. 

I’d never tried this before so I did a couple of experimental tests with a few stitch designs that appealed to me, I used Vilene Stitch N Tear as a backing behind it to stabilise the fabric.

This seemed to be satisfactory so I sewed the whole hem by this method a few millimetres away from the edge. The Stitch N Tear is then carefully torn away to leave the actual embroidery and then finally, as accurately as possible, I snipped away the excess fabric to leave the pretty scalloped edge.

I’m very happy with this finish on the hem BUT it’s just possible that it might not be very durable in the wash, I’m half-expecting that it might start to come away in places. If this happens then I’ll have come up with another idea but for the moment it looks nice. 

I hope you’ve found my tips for working with Broderie Anglaise helpful, and things to look out for with it. It’s certainly a fabric that is having a ‘moment’ at the moment, it’s timeless and feminine and I’m looking forward to wearing my Amaya for a few years to come. 

Thank you as always to Lamazi for providing me with the fabric to be able to write this, and thank you to Lydia at Made My Wardrobe for generously giving me the pattern. 

Until next time,

Happy sewing

Sue

Simple Sew Cocoon jacket

When it came to selecting our next make for the Simple Sew blog there were two new ‘mystery’ patterns on the list as well as all the existing ones. One was a dress and the other was the Cocoon Jacket. As my next blog would be appearing at the beginning of autumn it seemed an idea to take a chance on the jacket-I already know the Cocoon dress which has been incredibly popular and is a very simple and stylish make so I figured the coat would be very similar.

IMG_7767

I was so happy when the pattern arrived because it’s exactly that-simple and stylish!  The obvious fabric choice would be a nice woollen cloth-it suggests a boiled wool and this indeed would be perfect but, because I didn’t know just what the pattern was like until it arrived, I hadn’t chosen any fabric from one of our generous providers so I needed to get my own. For some reason it occurred to me that denim would an interesting choice and ideal for the autumn too. Luckily I live very near a branch of John Lewis so in I went and managed to buy 2.5m of a nice quality rigid denim in a fairly dark blue. The first thing I did when I got it home was put it through the wash twice to get out as much excess dye as possible and deal with any possible shrinkage before I started cutting out.

The pattern pieces are an intriguing shape, the back and the sleeve come as one large piece plus a front, a pocket and neck facings. What this means is that every piece ideally needs to be cut on the single which shouldn’t be a problem, it just takes longer and you need to be very careful not to cut two the same of the large pieces. If you want to use a cloth with a large check you may need to allow more fabric for good matching too. A stripe would look interesting as well.

Initially I opted to make my usual size 14 and I could already see from the pieces that this was likely to be too large. Before anything else I tissue-fitted the pattern. This is when you pin the tissue or paper pieces together accurately as though they are sewn and try it on carefully either on yourself or your dress stand if you have one. From this I could tell that the sleeves would be really long so for the toile I reduced them by about 8-10cms by folding out carefully about halfway down the sleeve. I cut and sewed the jacket then in some grey suiting fabric from my stash so that I could assess the size. I’m so glad I did this because it was HUGE, not just comfortably roomy, actually ginormous! I’m not sure why it needs to be so oversized but that wasn’t how I wanted to wear it so I chose to come down two whole sizes and make a 10. As you’ll see later it’s still plenty big enough. [I’ll recut and make up the grey one at some point so it won’t go to waste.]

fullsizeoutput_27fb
Hmmm, plenty of room for everyone in here!

The instructions tell you to overlock all the edges before starting but I made all the darts first (which aren’t indicated in the line drawing-why not?) and then overlocked. If you’re using boiled wool, or decide to line it, then I wouldn’t bother overlocking unless your fabric frays a lot. Denim does fray a bit because it’s a twill weave but it wasn’t really a problem here. As the overlocking on my coat was going to be visible I picked a mix of three fun colours, fuchsia, orange and teal. I used a jeans needle throughout too although a sturdier size (90 or 100) of a regular needle would do if you haven’t got one.

fullsizeoutput_27c7
multi-coloured overlocking

Because I’m using denim I wanted to use topstitching to highlight the seams. I was going to buy some specific topstitching thread but I couldn’t settle on a colour so instead I tried out a few colours in regular thread I already had and then used the triple straight stitch on my machine, which looks like topstitching. [You may not even know your machine has this stitch, it looks like three rows of straight stitch close together in the diagram so have a look to see if it’s there-it’s also known as saddle stitch] In addition to sewing on the patch pockets with like this I highlighted the darts at the back neck, elbow and hem, as well as all the seams and outer edges. Be aware that the triple straight stitch uses a lot of thread though.

fullsizeoutput_27ca
A very generous patch pocket, I used squared-off top stitching at the top edge for extra reinforcement.

This jacket goes together so quickly! You simply make up each half and then join them down the centre back. [Since writing this it’s been brought to my attention that the instructions for attaching the front to the back at the raglan seam are currently wrong! I’ve realised that I probably disregarded the drawing because I couldnt make sense of it and did it intuitively which isn’t helpful to you! The illustration shows the front piece attaching to the back the wrong way up, in so doing it means the neck edge won’t form a curve and the underarm sleeve seams don’t come together, below is the instruction as it currently stands, together with my drawing of how it should be]

IMG_8963
This is how the instruction sheet shows it. It has the neck edge attaching to the underarm seam and will never work if you do it like this.

fullsizeoutput_2aa7
This is my little drawing of how it should be. The illustration looks like the raglan seam won’t match up but it does, you have to manipulate it a little.

 The sleeve seam falls to the front as a raglan and there’s the darts in the back and elbow/underarm to give a little shaping but that’s it. I would urge you if you’re using a boiled wool or other fabric which looks the same on both sides to mark them in some way so that you don’t make up the two halves the same not a pair! If you use boiled wool there’s no need to finish the edges unless you want to, or use the facings. You’ll need to use plenty of steam to press those seams open too.

I used facings cut in denim but you could easily cut them in a contrast if you like. I didn’t bother with interfacing because my jacket is meant to be very soft and slouchy and denim is already quite firm without adding more weight. At the lower hem don’t forget to trim away the excess fabric at the corners so that they turn better to make a sharper corner. When you’re sewing at a point like this always start from the fold or seam (marked with the pointer in my photo) and sew towards the open edge so that you don’t get a wrinkle or lump forming, it pushes any excess fabric away flat as you sew with this method.

sew from this point
When you stitch the facing at the hem start from the point indicated and sew across.

trim excess fabric
trim away the excess at the corner but don’t take it too near the hem itself, to the left.

Once both halves are made and joined there’s only the hems to turn up and the fastenings-if you’re using any- to sew on. I bought a pair of HUGE metal press studs in John Lewis, the pattern suggests magnetic fastenings or bold decorative buttons would be fun too.

Considering I didn’t know anything about the pattern before it arrived I’m really delighted with how it’s turned out. I reckon this will be a very popular pattern this winter as it’s so quick to sew, just be very careful about your sizing though, at the very least do a tissue fit before cutting your fabric. It’s going to be a great casual cover up, for me it’s a variation on the denim jacket, but it’s still generous enough to get woollies underneath.

It would be easy to fully line as well, simply cut all the pieces in a lining fabric too and make up the same. Attach it at the neck and front edges and then add the facings is one way to do this but there are others. Alternatively, you could use ‘Hong Kong’ finish on the seams, this is to bind all the seams with bias- or seam binding, it makes the inside of the coat look lovely although it’s time-consuming. What about using a heavy drill fabric, or a waterproof one even? Add a hood? In-seam pockets? Fleece-lined sweatshirting? So many possibilities!

IMG_7848
dart near the elbow

IMG_7850
front raglan sleeve seams

IMG_7851
darts at the back neck

IMG_7852

IMG_7853
GIANT press studs!!

IMG_7854IMG_7856IMG_7860

IMG_7864
I used bright pink to top stitch the CB seam

fullsizeoutput_27cb
I managed to top stitch the whole under arm seam too.

Cocoon coat winter-ready!
Even coming down 2 sizes it’s a generous fit and there’s room for jumpers underneath.

Cocoon coat autumn

fullsizeoutput_27e2
there are darts at the back hem

fullsizeoutput_27e5
The blouse is a favourite Maker’s Atelier Holiday shirt.

fullsizeoutput_27e3
The trousers are New Look 6351

The jacket will gradually soften and scuff as time passes which is exactly what I want and I think I’ll get a lot of use from it. I’m looking forward to seeing lots of versions of the Cocoon Jacket appearing over the autumn/winter months ahead, I wore it to the recent Sewing Weekender in Cambridge organised by The Foldline and English Girl at Home and it got a fair number of very positive comments. You’ve only got to wait until the November issue of Sew Now magazine when the pattern will be the free gift with it, unless Simple Sew can be persuaded to release it sooner than that…

Happy sewing

Sue

 

 

Isca dress by Marilla Walker

You’ll know if you’ve read my recent blog about pattern companies that I have a ‘mixed’ opinion shall we say of indie patterns. Some of them are great with interesting, original and well-drafted patterns, others are too simplistic, lacking in instructions and poorly drafted. I happen to think that Marilla’s patterns definitely fall into the first category.

I first met Marilla nearly 3 years ago when she organised, via Instagram, a meet up at Walthamstow market in London. It was my first sewing meet up and I was more than a little nervous because it was such an alien idea in principle-turning up in a part of London I’d never visited before to meet a bunch of people I’d never met before! It was like a sewing blind date but I needn’t have worried because everyone (of course) was lovely. I’m slightly embarrassed now that I think about it that it’s actually taken me this long to try one of Marilla’s patterns out, anyway, I’ve broken my duck and I want to tell you all about the Isca dress.

IMG_8017

You actually get two quite different dresses for the price of one with just a few similarities. I got mine as a PDF but you can also buy them as paper patterns which Marilla hand-prints and packs herself-what a lovely touch.

I was particularly intrigued by the draped wrap-over front so this was the one I printed off and happily the PDF all went together well. I’m getting better at them now I think because I found them quite tricky to start with. I don’t always print off the making instructions because they can be quite lengthy but I did print these in ‘booklet’ format so now I don’t need to lug the laptop out to the workroom. Although I didn’t encounter any problems Marilla does give lots of useful advice in the instruction booklet about all sorts of details so if this is all new to you either read them first on a screen or print off the booklet before you do anything else.

The pattern has been out for a little while now so there are quite a few to look at for fabric inspiration but I think this striped version by Takaka is particularly lovely, if you search with the hashtag ‘iscashirtdress’ on Instagram you’ll find more for both styles.

I’d found a lovely soft chambray at Hitchin market which was perfect because it had sufficient structure but with drapiness. You could also choose a washed linen, a printed medium-weight crepe could look nice too, nothing with a lot of stretch though because of the neck-band feature-it could be a nightmare of stretchiness to sew then.

Because my fabric was plain it’s a breeze to cut out, yay, no matching!

The sizing isn’t the traditional 10/12/14 etc, take your body measurements and compare them to the chart [in inches or centimetres] and then pick the size nearest your measurements. There’s also a chart of finished garment measurements which will help you decide the sort of final fit you want. I’m really happy with the fit personally, it’s a close fit to the bust and shoulders becoming looser over the waist. One really useful thing Marilla has included, although I personally don’t have to use it, is instructions for a full or small bust adjustment. This would be particularly helpful because the strange shapes of the front bodice pieces could make this a bit of a head-scratcher otherwise.

fullsizeoutput_281b
FBA and SBA instructions

Although I’m a very experienced dressmaker there is some very helpful guidance if this a more advanced construction to you. Marilla is very thorough about where to trim seams, which direction to press them and how to make lapped or French seams if you want to use them. I didn’t top stitch any of the seams but you could do this if you wanted faux lapped seams for example.

I found topstitching the narrow band at the neck the trickiest part to sew, it had a tendency to twist and I had to unpick and re-sew a couple of sections. It would be well worth tacking this whole area if you’re in any doubt at all, it might save you time and frustration in the long run.

I really like the unusual details in this dress such as the raglan shoulder seam at the back, and of course the draping front section with it’s narrow band.

IMG_8015
The raglan shoulder seam at the back. It has a small yoke piece on the inside too, to stabilise the shoulder which is another construction detail I like.

fullsizeoutput_2819

IMG_8013
The back has darts and a waist seam which give it a very smooth, fitted shape in contrast to the front.

The pattern pieces for the front may look slightly curious shapes initially but the reason will become clear when they are joined together. There is bust shaping which results in the dress sitting smoothly over the bust and armhole area. This is a very well drafted pattern and a lot of time, care and attention has gone into it. This is the sort of indie pattern worth investing in! A single designer has put so much into this pattern for it to be the best it can be and I really respect that.

fullsizeoutput_2818
I love the way it ties across to the side seam.

IMG_8010

fullsizeoutput_2817
Indoor Doris is a bit skinnier than me so the dress looks a bit droopy on her. Also, it’s crumpled because I took these photos after I’d worn it for the day!

When I finished the dress all it needed was a button-fortunately Marilla points out that unless you need the dress to open up for nursing then this can be purely decorative. I had a rummage and found a single beautiful vintage button so I used that, it would have been too big otherwise. IMG_8012I finished the dress in time to wear at the Sewing Weekender in Cambridge and it got lots of very nice compliments which is down to the pattern not me being model material!

IMG_8009
pockets on a slant!

IMG_7984
The other pocket is under the ‘flap’

IMG_7982
The hem dips at the front and isn’t intended to be level all the way round.

IMG_7981

I’ll definitely make another version of this style of Isca before too long but the shirt-dress version won’t be very far down my autumn sewing list either. Plain or patterned, this is a stylish and unusual dress, in many ways it sums up why I love to sew my own clothes than a more ‘conventional’ style pattern might. You’d be very hard-pushed to find a dress like this in the shops and even if you did it would almost certainly come with a designer price tag! It could be sleeveless for summer in a cotton, or a really soft babycord with a sweater under for cooler weather. There’s room to eat a big lunch as well!!

Marilla has created a number of other patterns, including the Roberts collection dungarees which have been incredibly popular so check out her website to see them all. She’s an amazingly crafty and creative woman and if you want to hear her talking more about her background you can listen to her on the Stitcher’s Brew podcast here. Oh, and she makes her own shoes too…and bras…and soap…in fact I don’t think there’s anything she wouldn’t have a go at making!!

So normal blog service has been resumed and I’ve returned to writing about dressmaking and not just getting uppity about sewing stuff that bothers me….although judging by all the responses I’ve had, much of it bothers you too.

Until next time,

Happy sewing,

Sue

 

Imogen blouse from Sew Me Something

fullsizeoutput_1f90

This has become one of my favourite patterns this summer because I’ve made 3 now and I only bought it in March at the Spring Knitting and Stitching show! What I like about it is it’s beautiful simplicity with just a bit of detail on the neckline. Sew Me Something are based in Stratford Upon Avon and designer Jules sells lovely fabrics, teaches classes as well as producing a range of very wearable pattern designs. Whilst I haven’t been able to visit the shop, I’ve met Jules a number of times now at various shows in London. I admire her personal style and we have similarities in our work background, I used to work in high-end bridal and evening wear too…back in the day.

After I bought the pattern in March I made the first one in a slubby white poly/cotton (I think) origin unknown as a wearable toile. Rather than cut up the pattern I traced it off onto Swedish tracing paper which is stronger than regular tracing paper. I’m not always in the habit of tracing patterns off (especially if they’re tissue paper anyway) but, perhaps bizarrely, when it’s good quality paper I often do. I was short of fabric so the back had to have a seam in it but that wasn’t a problem. The instruction booklet is clear and well illustrated, the only possibly tricky part of the design is the notch neck front but following it slowly and methodically it works a treat. I’ve photographed my most recent version which hopefully makes it clear if you’re reading this as a bit of help.fullsizeoutput_1f97fullsizeoutput_1f98fullsizeoutput_1f9afullsizeoutput_1f9bfullsizeoutput_1f9c

IMG_3992
sorry this one’s a bit blurry 😦

Once you have the placket pieces overlapping I stitch through all the layers at the bottom to secure them, then I zigzag the edge to neaten them (easier than trying to put such a tiny piece underneath the overlocker.IMG_3993

Finally ‘stitch in the ditch’ carefully from the front to hold the placket in place.IMG_3995

IMG_3996
Oops, got that bit caught! annoying but easily rectified.

With my first plain white version I followed the balance marks for the gathering but actually I felt the gathers looked too spread out so when I made my second version (and now the third!) I’ve condensed the gathering into smaller areas on the front, shoulders and centre back which I’m happier with.

Another thing I like is the instruction to sew hems separately before joining the side seams. This sounds a small thing but because the hem is dipped and rises at the side seams it means you get a much neater finish at the side seams-genius!

IMG_3998
I sewed the sides with French seams so it super-neat inside. I’ve used contrast yellow on the hem too.

fullsizeoutput_1f1f
I’ve noticed I always wear my gorgeous ‘bee’ necklace from Alex Monroe with Imogen because the notch shows it off so well. I’m wearing one of my Zierstoff Gina skirts and you can read the blog about those here.

IMG_3708
Autumn leaves at Anglesey Abbey, Cambridgeshire.

My second version was made using the gorgeous coral lightweight linen I bought from Jules with the pattern in March.

 

I’ve made all my versions with the longer length sleeve with loose elasticated cuff, you could obviously make them tighter but I prefer them like this.

I wore the coral top to the Sewing Weekender in August and it got plenty of compliments (and obviously I told everyone what the pattern was, although several people recognised it straight away)

fullsizeoutput_1f2f
Hard at work (photo credit Charlotte Powell at English Girl at Home)

The jolly fabric for my newest version came from the swap hosted by The Foldline at the recent Great British Sewing Bee Live, it’s a sharp contrast to the plain fabric of the first two that’s for sure! Thanks Kate, hope you like what I’ve done with it…

IMG_3672
I look a bit crumpled after all that shopping and chatting at GBSB Live…I’ve made it to the cover of Love Sewing….well, nearly 😉

What I’ve loved about this top is how comfortable it’s been in warm weather, and the details are pretty but understated-a trademark of Sew Me Something patterns to be honest. I know I’ve made 3 but I reckon there’ll be more, it would be gorgeous in a silk chiffon or crepe de Chine, or fine wool challis for example. You could add a trim to the neck, in the seam perhaps or beadwork perhaps? This third version I’ve cut a little longer than the previous two simply because I had plenty of fabric. I’m going to layer it up in the winter with a long-sleeved tee underneath. Another thing I like about this brand is that the sizing is for real women and goes right up to a 22-not all independent companies have this range and I’m not sure why.  and that seems a shame.

fullsizeoutput_1f91
I lengthened this version by 4cms simply because I had plenty of fabric. If your fabric is wide enough to fold the selvedges to the centre it’s an economic way of cutting out, it also gives you the ability to line up elements of the print so they run pleasingly around the body (always a dead giveaway of cheap RTW clothes)

fullsizeoutput_1f9d
I finished the inside neckline this time with a bit of soothing slip-hemming.

IMG_4020
Number 3 finished!

 

I want to stress that I bought my own copy of the pattern and the fabric so any opinions expressed are entirely my own. I’m trying out a few trouser patterns lately (more on that to follow in a few weeks) so I’m tempted to try one of Sew Me Something’s trouser patterns in the future but there’s a long Autumn sewing list to work through before I buy anything more….famous last words!

Happy sewing

Sue

 

yet another variation….neckline 3!

img_0999

This one happened because I found a gorgeous double-knit jersey in The Creative Sanctuary in Hertford on a visit to collect a Collette Moneta pattern to take part in the MonetaParty on Instagram at the end of February….one thing leading to another.

Ok, sparkly stars and pink stripes aren’t very mature but I liked it and I wanted a long-sleeved cosy top for our upcoming trip to the Lake District and because this was reversible I knew the roll-back cuffs I’d used before would look good.

I changed the basic neckline on this one by raising it by about 5cms and then making a rectangular collar to fit it, I didn’t want it standing as far away from the neck as the two funnel-neck ones [in truth, I could have raised it a bit more as it still isn’t that close to the neck] By cutting two rectangles and stitching them right side to wrong side I could make the stripes visible. I’d got another heavy metal zip so I thought I’d put that into the collar seam to give it another detail.  Continue reading

Using a fleece blanket to make a top

You might have seen my recent funnel-neck top… img_0455

I was jolly pleased with how it turned out and decided I’d make another when I found the right fabric. I didn’t expect IKEA to be the place I found it! They sell (amongst many many other things) inexpensive fleece blankets and the day we went some colours were selling for a ridiculous £2!! I bought a light blue and a charcoal grey (that might have been dearer, I’m not sure)img_0699

img_0700
I gave them a wash and tumble dry and I was all set.

There is a slight widthwise stretch but the fleece is otherwise stable.

img_0718
I folded the edges in so that front and back are both on folds, the back would have had a seam originally but I didn’t want that.

The sleeves and neck pieces came out of what was left.

img_0719
I wanted long sleeves this time so I just extended them on the fabric and marked it with an air-erasable pen.

The other change I decided to make was to add an exposed zip to the collar as a new detail. I had a metal jeans zip in the drawer so I used that.

img_0001
To work out where the end of the zip needed to go I matched the seam allowances for the collar next to the shoulder (where the gauge is). The two red pins indicate where the snips will go at the base of the zip.

img_0004
I reinforced the area where the zip was going with iron-on interfacing, then snipped it where the two red pins had indicated for the end of the zip.

I then used the same method of insertion as for the Tilly and the Buttons Orla blouse.

Another joy of this fabric is that it doesn’t fray so there’s no need to overlock or finish the edges-superspeedy!

It all went together very quickly, even allowing for the collar-change. I haven’t added a pocket to this one although I might and the sleeves simply roll up. I’m wearing it as I write this with a turtle neck top underneath and it’s very cosy. img_0743img_0736img_0754img_0757

You can always tell when my daughter has taken the pictures because they come over all arty aka wonky! Excuse the roughness of my appearance, I’ve had a cold…

I haven’t started a grey one yet, I’ll probably think about a change of neckline for that one.

Obviously I bought an inexpensive fleece blanket but you could just as easily use any blanket you already have, or better still, buy one from a charity shop. (I do feel slightly guilty for buying this blanket rather than up cycling but I didn’t have anything suitable at the time) The size of the average fleece blanket is just about right for a sweatshirt, I haven’t made a Named Talvikki or a Grainline Studios Linden but it might be possible to try them for example, you may need ribbing for the cuffs and neckline though.

Why not give it a try…

Happy Sewing

Sue

a 60’s style cosy funnel-neck top

In the last couple of weeks I’ve noticed a really nice little top called Toaster by Sew House Seven popping up all over Instagram. It looks cosy and very straightforward to make but me being me I thought “I can do that” so I did!

Initially I needed a suitable fabric and when I was on my outing to Goldhawk Road in London last week I spotted the very thing. It’s a felted-wool jersey in a very pretty coral colour, it cost £8.50 per metre and was 150cms wide so I splashed out on 1m50-I know, so reckless!

So next I needed to create a pattern. I rummaged through my somewhat large pattern collection to see what I might be able to hack (rather than starting totally from scratch) and found a raglan-sleeved T-shirt pattern I’d used last year with some lovely Faberwood French jersey img_3693

New Look pattern K6230 was free with Sew magazine last year and, as you can see, I’d made the V neck version. img_0456

This time I opted for version B with the round neck. Because I didn’t want the top to be too close fitting I opted to make the largest size so that it was roomy enough to layer up other things underneath it. I also wanted shorter sleeves with cuffs so that meant a change to the pattern. The neck-band wasn’t going to be right either so I needed to make a completely new collar pattern.

I traced off the sleeve onto spot and cross paper and shortened it and made it a about 3cms wider at the cuff edge. The new cuff is just a continuation of the sleeve plus seam allowance and a notch to make sure they get sewn on the right way around.

img_0434
tracing off the original sleeve, my new hem is the curved pencil line.

It’s important to have the cuff edge of the sleeves at a right angle to the sleeve seam so that it’s a nice smooth line around the arm. You can see in the photo how I’ve used the Patternmaster to line this up.

img_0457
New sleeve with it’s cuff

To make a new collar I needed to know how long HALF the total neck edge was so I pinned all the pieces together matching the seam allowances and measured carefully along the stitching line.

img_0429
Measuring the neck edge to make a new collar.

I cut out and made up the front, back and sleeves. By not sewing up the side seams until later makes it easier to sew on the collar with everything out flat, then joining the underarm seams towards the end.

I needed to toile the first collar pattern to make sure it worked properly so I cut it out in some scraps of jersey and sewed it onto the neckline. I could already see that it had strange points over the shoulder seams.

 

There shouldn’t be the strange pointy bits sticking out, it should be a smooth line. The back wasn’t too bad but I wanted the front to stand away from my neck more so I needed to add some fullness to the top edge of the piece.

img_0458
Version 2 was much better, you can see where I’ve added small ‘wedges’ along the top edge of the collar but nothing along the lower seam line. I then cut it in spot and cross to form a single pattern piece so that it doesn’t have to be cut on the fold of the fabric. [on thick fabric this might not be very accurate so single layers are better]

img_0440
Second version of the collar, it looks a lot better.

I was reasonably confident that the collar would be OK now so I went ahead and cut it in fabric, along with interfacing. I’d done a quick test of which interfacing I wanted to use so that it had the right amount of stiffness to make the collar stand out as I wanted.

img_0441
I went with the firm inter.

Because the collar involves sewing a convex and concave curve to one another it’s best sewn with the fuller edge of the front UNDERNEATH so that the feed dogs deal with the fullness as you sew, that way it makes the two edges end up the same length and a smooth flat finish. The photo here might make more sense.

img_0442
The collar is uppermost with the main part underneath, the slight fullness is visible underneath.

Once the top collar was sewn on I attached the under collar to the top seam and then under stitched it to help it roll to the inside more smoothly. I overlocked the lower edge of the under collar (to reduce bulk at the seam) then I stitched it from the top side in the seam line to secure the collar down.

img_0443
Stitching ‘in the ditch’ to secure the collar from the right side.

Nearly there! Time to sew up the underarm seams right throughout to the cuffs. The cuffs then turned up to the inside and are stitched ‘in the ditch’ again, like the collar. So that was virtually it until, at the last minute, I decided to add small patch pocket.

Finito!

I tried it on and couldn’t believe how well the collar had turned out!! It stood out from my neck by just the right amount. Although I had been reasonably confident to would be pretty much as I wanted I wasn’t 100% sure that I wouldn’t have to make another modified version. img_0447

img_0450

img_0454

So there you have it…

Obviously this is my take on a cosy winter top but I hope it demonstrates that it can be quite simple to adapt an existing pattern to create something original of your own (although you might decide it’s easier to buy the actual pattern!) I think I’ll be making more of of these and I’m looking forward to getting a lot of wear from this one in the meantime.

Have a go, you might surprise yourself!

Happy sewing

Sue xx