Pfaff air threading and a Tesselate Tee!

There’s a lot going on in this post because I’m offering you my thoughts on not one product but three! 

So, a bit of background first…I used to be a keen runner but various injuries forced me to stop and then I never quite got started again. Fast forward at least 3 years and I’d gained weight which I wasn’t happy about, I felt sluggish and lacking in energy, I wanted to lose the weight for the good of my health and mental wellbeing. So, coming up to date, the return to running is going well (if cautiously…) and I’m losing some weight which in turn has inspired me to try making some of my own activewear. Fortunately for me Melissa Fehr of Fehrtrade has become a sewing friend of mine since first meeting her at the Sewing Weekender a few years ago and she generously offered me a copy of her Tesselate Tee pattern to try. I’d helped test her Rouleur leggings last year so I already had that pattern. Part of the beauty of Melissa’s patterns is that she gives you really comprehensive instructions to be able to sew activewear using just a regular sewing machine if you don’t own an overlocker. I’m in the fortunate position at the moment to be a Pfaff Brand Ambassador and I have their air-threading Admire Air 5000 on loan, along with a Coverlock 3.0 as well so this all seemed like the perfect opportunity to make some new running kit. 

Suitable activewear fabric is not something I have in my stash other than the scraps left from testing the Rouleur leggings so I had a little online search and came across Frumble fabrics. They have a good range of activewear fabrics at competitive prices as well as an impressive selection of suitable elastics and other trims or haberdashery you might need for this sort of project. I bought a metre of plain navy fabric and a metre of navy camouflage print, along with navy soft waistband elastic, some navy fold-over elastic and, finally, silicone grip elastic. [One point I should add here is that I decided not to pre-wash the fabric, this was based on my own knowledge and belief that synthetic fabrics are usually more colour-fast than natural fibres. I was wrong. The navy came off on my hands as I was making it up so as soon as I finished both garments they have been through the wash after all. I have alerted Frumble so I’m not saying anything here that I haven’t already fed back to them. Overall I’m pleased with the fabric quality and I learned my lesson-prewash even if you think it doesn’t need it!]

I opted to go for a medium size Tesselate top, Melissa has recently layered the pattern so now you only need to print off the size or sizes that you want, I wavered between small and medium according to my measurements. The small probably would have been fine but the medium gives me a little more room without the constant thought that I should be sucking in my wobbly bits! One of Melissa’s USP’s with her patterns is interesting seam lines which means, as well as striking designs, you can often use up small pieces or remnants of suitable fabrics. The Tesselate has a variety of options including short or long sleeves, thumb cuffs, a hood (with ponytail hole!) and back zipped pocket. 

I cut the leggings a mixture between small and medium and I’m happy with the fit of the end result. I had enough fabric for long sleeves on my Tesselate and, although there’s a pattern for the back pocket, rather than print it off I made my own. 

I opted to put the pocket in the back left diagonal seam because I decided I could reach it comfortably behind me and use the zip easily whilst moving if necessary. I drew onto the pattern how big it needed to be to accommodate the essentials.
I placed spot and cross paper over the top and traced off the shape, adding 1cm seam allowance to it.
a new pocket bag labelled and ready

I played around with the fabrics until I was happy with their placement, I had enough of the blue spotty fabric for the back and front side panels, everything else I divided between the two navy fabrics.

Because I was going to be sewing a fair bit of the garments together directly with the overlocker I join the pieces with the pins at least 2-3cms away from, and parallel to, the cut edge. Then it’s safe to sew without the pins being anywhere near the blade.

I’ve made another little video to demonstrate how the air threading works on the Pfaff, you’ll need to bear in mind that it might seem like it takes a while to thread and so where is the advantage in air threading but that’s because I’m trying to explain as I go and I was sitting at a funny angle behind the camera whilst I did it.

After two years of owning the Quilt Ambition 2.0 (now discontinued) I’m used to the quality of Pfaff machines so it doesn’t surprise me that the Air Admire is sturdy (no shifting about on the table while you sew) and very speedy, with a superb quality of stitch. It doesn’t take long to get to grips with the air threading and, as I mention in the video, there’s an automatic threader for both needles too! I couldn’t get the hang of that at all to start with but it’s amazing what a difference it makes if you read the instructions and follow them! Of course, this is an expensive machine and I understand that not everyone will have that kind of budget but if you are considering an air threading overlocker (there are now a lot more models on the market than just market-leader Babylock with prices gradually coming down) then this one is most definitely worth thinking about.

I inserted the invisible zip on the sewing machine, then attached the pocket bag that way too. The T-shirt goes together pretty quickly considering the number of pieces-most pieces are cut singly because they are asymmetric-if you’re using the same fabric throughout it would be an idea to label your pieces in some way so you don’t get them mixed up.

I find it very useful having a variety of stitches to choose from especially when sewing with stretch fabrics, the 3-step zig zag was ideal when I was sewing the elastic into the waistband, I also have an ‘elastic’ stitch which is useful. A lot of machines, even quite simple ones, will probably have a stitch option which will enable you to sew activewear so why not try out a few of them to see exactly what they are, the instruction book should be helpful, or there’s so much information on the internet too.

The finished waistband on the leggings, elastic is completely enclosed in a seam at the top and then I’ve secured it further with a 3-step zig zag stitch
I’ve joined the elastic for the legs into loops which are then sewn to the right side of the fabric, matching the edge of the elastic to the cut edge of the fabric.
I used a small zig zag to stitch it in place. This then flips to the inside and I coverstitched it along the top edge.

To neaten the hems and around the neck I swapped over to the Coverlock 3.0 which I had on the coverstitch setting. Again, this is a very sturdy piece of kit with excellent stitch quality, I am finding there is a certain knack to using it and I’m by no means an expert yet but it certainly gives a very professional finish to knit, jersey or stretch garments.

The Rouleur leggings also have large side pockets which are perfect for holding your phone and/or keys etc (Betsy getting in on the act again too)

As always, I hope you’ve found this helpful, I always try to be honest about how I get on with a product whether or not I’ve been gifted, loaned or purchased it-all three in this case. If you’re tempted to have a go at activewear then Melissa is a good place to start-she’s even written a book on the subject so you’re in good hands!

Until next time, happy sewing

Sue

Dawson Coatigan by Thrifty Stitcher

I followed the progress of this pattern with interest on Instagram when it was originally released nearly two years, it was fascinating to see how Claire-Louise Hardie (the Thrifty Stitcher!) developed and finessed the various elements of it as she sampled it, up to the point that she was ready to release it for sale. It has attractive style lines with princess seams in the front which curve into hip pockets, the back also has princess seams and there’s a horizontal seam just below the natural waist. The collar curves up smoothly against the neck and the back collar has a ‘sunray’ of five darts spreading out towards the shoulder blades which I particularly like. The cuffs each have 3 similar darts, the details on this pattern has simple but so stylish.

My copy is a paper pattern but it’s now a PDF available from CL’s own website.

This post was originally published last year by Minerva who generously provided me with a nice firm Ponte Roma in a plain navy to make the Dawson in, it would also work very well in a boiled wool, felted wool, Melton, not a loose tweed though as they can start to fray and you’d lose the details too much in the weave. Anything fairly structured and stable would effectively show off the style lines. You could get some interesting effects with checks or stripes if you want a challenge! I’d wanted to make another version for a while because I’ve had really good use from the navy one, I hadn’t got around to finding any specific fabric for it but then I hit upon the idea of using a single old heavyweight cotton curtain that used to keep the drafts out by our front door. It had long been replaced for this task but I just had it folded up underneath the heat-reflective mat that I use on my cutting table. In order to maximise the fabric in the curtain I undid the deep hem and the sides, and removed the tabs at the top. I gave it a wash to clean it but also to, hopefully, stop it shrinking later on.

Areas like the pocket edges and the neck need stabilising with some iron-on tape or strips of interfacing as per the instructions, especially if you use a knit fabric like Ponte. I would recommend stabilising the shoulders with seam tape or scraps of ribbon to prevent stretching too. I used a specific needle for stretch fabrics and you could use the ‘lightening’ stitch to sew with if your machine has it, or a very straightened out zigzag. If you do use boiled wool the layers could be quite thick, use a straight stitch but you may need to lengthen it a little more than usual.

The pattern comes in eight sizes which are not numbered in the conventional way, CL opts for letters instead, so you work from your own body measurements to choose which size should fit you. I cut and sewed a size F originally which was quite generous, for the newer version I’ve cut the next size down. I misjudged how generous the ease is in the garment so I usually wear the Ponte version layered up over jumpers or sweaters on warmer cool days if that makes sense. At the end of the day it’s intended as a casual coat so don’t make it too small as you’ll always be pulling it closed across you. The sleeves are nice and roomy too, I’ve noticed some coat/jacket patterns can be a bit snug around the bicep for me which is a bit dispiriting, I’m hardly a muscle-bound hulk! Just check before cutting out if you’re happy with the sleeve length too, I probably could have added just 3-4cms because it feels the tiniest bit short on me.

The pattern goes together beautifully and all that tweaking in the sampling stage is borne out in the final version. I found the instructions pretty clear, they are mostly photographs and there are some really useful hints and tips which will come in very handy if you aren’t that experienced in your dressmaking yet. Make sure you transfer your markings for the pocket pivot point for example so that you get a crisp finish for the corners.

You could top stitch all the darts down, possibly in a contrast thread if you like, but because the Ponte had a slight stretch I didn’t do this on mine. I did top stitch down the front facings though and caught them down in a couple of places on the inside to stop them flapping. 

For the ochre version I topstitched more of the seams, I confess that I was incredibly slovenly and used up various threads in my collection so not all the stitching is the same colour…oops! Incidentally I didn’t use top stitch thread, instead I used the triple straight stitch which looks very similar although it is quite thread-hungry (hence the non-matching!)

This time however I didn’t top stitch the front facings down, I adopted a different approach. As it’s an unlined coat so all the innards are visible I used some ribbon to anchor the facing down in a couple of places. I chose to do this because I know from experience that when you’re sewing through several thick layers the triple stitch (which is a set length on my Pfaff and not adjustable) it can lead to puckering which doesn’t look so nice. Try a sample before you go ahead if you aren’t sure, that’s a LOT of slow unpicking if you don’t like it after all.

ribbon tabs between the facing and the pocket bag stop the facing from flapping about too much
You can see from this shot where I’ve placed the ribbon anchors.

I finished the hem by hand using a herringbone stitch rather than machining it for the same reason that I didn’t top stitch the front facings.

I think the Dawson is a well-drafted and executed pattern from an independent designer (and CL’s art work features herself so it squeaks into the #so50visible category!) The Minerva Ponte Roma works well for the soft tailoring, using my old curtain gives the slightly cocoon-shape a little more definition. It shouldn’t be too difficult to do an FBA if you need to either. I’m much happier with the fit of the ochre one, but I love the navy and will still wear it regularly too.

cheer up love!

Because the Dawson is a loose cocoon shape it would make a beautiful evening coat in a glamorous brocade, to go over the top of your evening outfit, denim would look great too (Have a look at my Simple Sew Cocoon jacket in denim here)

I guess this was also a useful exercise in upcycling, the curtain was years old and not being used for it’s original purpose so I thought why not give this a try. If I found I wasn’t mad about wearing the colour after all I know it’s 100% cotton so it would dye, I might come unstuck with the polyester sewing thread though which would take up the colour differently-it’s hardly Saville Row standard though! The Dawson took barely two metres of fabric (the front facing is helpfully cut in two parts which helps reduce the fabric usage, and of course you could always use a contrast fabric anyway) it doesn’t instruct you to use interfacing on any of the collar or facing parts but I did, just to stabilise the fabric a bit.

Until next time, Happy sewing

Sue

My second Lamazi blog post

Much as I’m a big fan of sewing and wearing dresses, I do love separates too, especially tops. I think this version of the Amaya shirt by Made My Wardrobe may just have gone to the top of my favourites list! [Full disclosure, Lydia offered me my choice of one of her patterns as a PDF with no expectation of a review and I selected the Amaya with its gathered neckline, raglan sleeves and full floaty cuffs] I printed it off but then didn’t start it for a while until the ‘right’ fabric came along.

As a Lamazi Fabrics blogger we each volunteer for a number of slots throughout the year but Liana was short of a post for early August so I offered to do it. I thought the Amaya would be a good option as it’s not complex and I could probably sew it quite quickly to meet the deadline. When my eyes fell on the beautiful printed Broderie Anglaise I knew I had my perfect match! 

When the fabric arrived it was absolutely gorgeous, so soft and pliable. Broderie Anglaise can often be quite stiff and crisp, which may be what you want, but I’ve also found it to be a disguise for a cheaper quality cotton fabric with lots of dressing or starch in it so do be slightly wary of very cheap Broderie Anglaise. This version is a printed soft cotton lawn which is then embroidered, there are lots of eyelets so personally I’ll probably be wearing a plain-coloured RTW camisole underneath as no one needs to see my undies or midriff thank you! This specific fabric does not have an embroidered edge which some Broderie Anglaise does, and also be aware that the embroidered part of the fabric doesn’t run right up to the selvedge, this is normal with this type of fabric. On this particular fabric there’s a wider gap down one side than the other so you may find the useable part of the fabric isn’t as wide as you would think. In other words, don’t scrimp on the quantity of fabric when choosing Broderie Anglaise for a project because you could find yourself a bit short by accident.

I opted for a UK size 14 with no modifications according to my measurements but I think I will go down a size when I make another, the fabric you choose could make a significant difference to the finished look so a soft and floaty georgette or silk crepe de chine for example would look divine with plenty of volume but a firm linen, or a cotton poplin could give you the appearance of a ship in full sail! (that may, of course, be the look you’re after!) 

This fabric has a one-way design but I chose to turn the upper sleeve pattern piece to interlock better and make it more economical to cut out, I really don’t think it’s that obvious on the finished garment, always worth checking though! 

It’s pretty well impossible to see snipped notches or even triangles on this fabric so, in order to tell the front of the sleeve from the back, I marked the single and double notches with long thread tacks and this seemed to work well.

I used a French seam finish on the cuffs but found there wasn’t any particular advantage to doing this, for the rest of the construction I sewed regular seams and overlocked them together. 

The pattern calls for interfacing to be attached down the centre front seam to stabilise it but I chose not to do this as it would show through the eyelets, I simply neatened the edge of the self-facing with the overlocker. I had a rummage through lots of the miscellaneous trims and ribbons I’ve had from past projects and tried a few ideas out with them but in the end I only used a white cotton trim down the front and simple edging lace on the sleeves, I would have used this on the hem too but there wasn’t enough, more on that later. 

I added a triple zigzag stitch to embellish the sleeve ruffle seam too.

The neckline is gathered up into a bias-cut band but instead of cutting it on the bias I used a straight strip of the printed lawn from near the selvedge. I did this because a bias strip of such holey fabric wouldn’t have worked well at all, the one drawback of the tie being cut on the straight is that it doesn’t curve around the neckline quite so smoothly but it’s fine. The tie is topstitched close to the edge so, to match the sleeve, I used the triple zigzag stitch again. 

Finally I had to finish the hem, I could simply have turned up as per the instructions but I wanted some kind of pretty finish to echo the cuffs. As I didn’t have enough of the sleeve trimming, or any other edging lace which I felt worked alongside what I’d already used, I opted to try out one of the satin stitches which my Pfaff machine is capable of. 

I’d never tried this before so I did a couple of experimental tests with a few stitch designs that appealed to me, I used Vilene Stitch N Tear as a backing behind it to stabilise the fabric.

This seemed to be satisfactory so I sewed the whole hem by this method a few millimetres away from the edge. The Stitch N Tear is then carefully torn away to leave the actual embroidery and then finally, as accurately as possible, I snipped away the excess fabric to leave the pretty scalloped edge.

I’m very happy with this finish on the hem BUT it’s just possible that it might not be very durable in the wash, I’m half-expecting that it might start to come away in places. If this happens then I’ll have come up with another idea but for the moment it looks nice. 

I hope you’ve found my tips for working with Broderie Anglaise helpful, and things to look out for with it. It’s certainly a fabric that is having a ‘moment’ at the moment, it’s timeless and feminine and I’m looking forward to wearing my Amaya for a few years to come. 

Thank you as always to Lamazi for providing me with the fabric to be able to write this, and thank you to Lydia at Made My Wardrobe for generously giving me the pattern. 

Until next time,

Happy sewing

Sue

Revisiting a ‘vintage’ blouse pattern

I know many of us often sew patterns multiple times because we like them but I’ve taken this to a new extreme recently. I last sewed this blouse pattern Simplicity 8704 when I was around 16 or 17 years old, the date on the back is 1978 so I must have made it while I was still at school! I remember I used a burgundy-coloured viscose (or similar) with a floral print on it and it was definitely one of my favourites as I wore it a lot, probably swanning about in the Sixth Form common room!

There have been several times when I’ve been tempted to revisit it but for one reason or another I’ve put it back in the box for another day but this time I kept it out and went in search of fabric in the stash. Initially I was going to use a really pretty pastel pink lightweight checked cotton I got from Sew Me Sunshine (I can’t see it on the website now though) but when I realised I was going to have to pattern match the deceptively tricky check I thought better of it. I wasn’t in the mood for taking an age over that so I continued to rummage until my eyes fell upon the (also) pale pink linen I acquired from the local Scraps Store last year. I found it in a container full of various unwanted fabrics and there was nearly 5 metres of it so, for a donation, it came home with me! I laundered it at the time but put it away. I thought I might make a dress with it originally but, because it’s such a pale pink, I didn’t want to end up looking like a blob so I left it for another time.

A plain linen blouse appealed to me though and I didn’t have to fiddle about pattern matching so away I went and it was cut out in no time. Even though the pattern was a single size-this is how most patterns were sold until multi-size patterns were introduced-and my size has fluctuated to say the least over the years, amazingly it was still going to be the right size with no alterations.

There’s not much else to say about making it up except I remembered that an @SewOver50 stalwart, Lisa, had shared on her grid the day before that she had used a wing needle to decorate a plain linen tunic she was making which reminded me that I’d intended to find a use for the same effect at some point but forgotten all about it-Thank You Lisa!

The wing needle (I’ve also seen it called an ‘heirloom’ needle recently too) is like a regular needle except it has fine metal ‘fins’ to each side of the shaft which creates a little hole like a tiny eyelet in the centre of the stitch as it forms. A stitch which looks like a little star works best for this effect but you could try experimenting to see if any others look nice

I made a little video of my machine in action.

It’s worth bearing in mind a couple of important points if you’re going to use this decoration. Firstly, you can’t easily pivot at a corner with the needle down in the work-I sewed the collar in three separate moves, secondly you won’t be able to use the automatic threader if your machine has one and thirdly (thank you Lisa for telling me this because I don’t have this feature) you can’t use your automatic thread cutter if you have one.

As well as the collar I embroidered the cuffs, the front raglan seams and down the button placket, although I did this last one after I’d hemmed the bottom and sewn the buttonholes so that it was the exact distance from the edge and the buttonholes.

I love the way the blouse gathers into the collar, which is a two part construction incidentally, the raglan sleeves are straightforward but the gathered cuffs add a nice touch. I found a selection of Mother of Pearl buttons amongst my tidied-up button boxes to add another of my usual quirky details but otherwise that’s it. It’s a reasonably quick make but it was lovely to sew the details of collar construction and the cuffs, there’s an elegant simplicity to it I think. I will either wear it loose over the top of trousers or tucked in, or underneath a pinafore dress maybe?

It might sound strange but it feels a bit like an old friend has come back to visit, and I might even make the placket front version now too!

Until next time, keep sewing!

Sue

I made a Sew Over 50 video!

I thought I would share with you the video I made specifically for the recent Sewing Weekender here in the UK for anyone who wasn’t able to, or wasn’t interested in attending. Unlike previous years, when the event takes place over two days in Cambridge, this one was entirely online and so the organisers, Kate and Rachel at The Fold Line and Charlotte @englishgirlathome asked an impressive selection of contributors to make short videos on a variety of topics. I’ve never made a film before so it was a pretty steep learning curve!

The first challenge was going to be filming it, and then it would have to be edited in some way too. I worked out that if I balanced my phone on top of my sewing machine in my workroom it was at the right sort of height with good light. Then I decided I needed a script of sorts to keep me on track and that is what I’ve reproduced here, along with the video itself. I printed it out and stuck the sheets to the window and to the sewing machine like a kind of ramshackle autocue! It turned out the window was too far away though and I looked like I was gazing to the heavens for divine inspiration…how to vloggers do this all the time? Maybe they do just waffle on and nobody minds? hey ho, I knew the things I wanted to say and without some kind of prompt I might forget some of them. Anyway, I managed to film it in bursts although I did have to pause one time to shoo the pigeons off the roof because they were audibly clumping about and I didn’t need that distraction too! I found my laptop has iMovies so I managed to splice the whole thing together using that, the next Jane Campion I am not!! The script below is not word-for-word what I said because I managed to freestyle it a couple of times in an attempt to sound natural but for anyone with hearing difficulties it’s close enough, I’m afraid subtitles were absolutely beyond my rudimentary film-making abilities.

I hope you’ve all been enjoying the Online Sewing Weekender and I want to begin by thanking Kate and Rachel of The Fold line and Charlotte from English Girl at Home for taking the very brave and audacious step of carrying on with the event in spite of the strangeness of the times. It’s so great to imagine all of us sewing away at the same time wherever we are in the world.

As well as my own Instagram account I’ve also been involved with the SewOver50 account since the very beginning and whilst Judith and Sandy manage the account on a day-to-day basis I write the blogs which accompany particular discussions or any challenges which have been running.

When Kate, Rachel and Charlotte invited me to be involved I thought I’d chat a bit about the #so50visible challenge involving indie patterns in particular. It first ran in February last year and then again this March.

The reason SO50 began in the first place was because we felt that our slightly older age group was being overlooked by the burgeoning home sewing industry and we really didn’t want it to become as age-centric as the mainstream fashion industry has always been. Plus many of us bring a wealth of knowledge and experience which we’re only too happy to share with anyone new or maybe returning to dressmaking at home. 

Many of you will know that the dress pattern market has been dominated for many decades by the so-called Big 4 but in the last 10 years or so there’s been a boom in independent designers putting out their own patterns.

Followers of SO50 have embraced these indie designers with gusto but we also felt a little bit side-lined by them too. We didn’t often see ourselves being reflected back on the packaging or marketing. 

The #so50visible challenge was created to draw some attention to ourselves, to highlight that very few older sewers were featured, and to politely encourage a change of thinking. 

We came up with the idea to ask people to only sew a pattern which featured an older model in it’s advertising and promotion.

Judith and I spent an absolute age trawling through the Fold Line database and eventually came up with quite a modest list considering how many patterns are listed! We found a few books with older models too. 

Throughout the month long challenge followers were asked to share their makes, it meant many people found new brands of pattern maker which we might not have heard of before. Very often the most popular patterns were stylish, fashion-forward and wearable but the model looked more like us. Many of SewOver50’s followers are still very interested in fashion and style and we still want to look good whilst making our own clothes. 

Many of us in our 50s and 60s have more time to sew for pleasure and we might have more cash to spend on patterns and fabric too so it always strikes me that it’s a missed opportunity for indie pattern makers to disregard this huge potential market. 

While the first challenge was running we also introduced the #so50thanks hashtag because if anyone’s make was reposted by the designer we thought it was important to appreciate that they had first of all noticed and acknowledged the maker and that they were then happy to share it on their own feed. 

It’s a virtuous circle isn’t it? Feature an older model on the pattern and it gets our attention, we buy your product, we share our makes, SewOver50 probably reposts to it’s 20K followers, you get free advertising to an audience with money to spend, and more people will buy the pattern because they can imagine themselves wearing those clothes-simple! 

There are a few brands which have always been great at using a diverse range of models including Paper Theory, The Maker’s Atelier, Cashmerette, Pattern Union, Style Arc and Grainline for example, and Closet Case patterns have recently named their newest release Blanca after one of our most stylish and inspiring SO50 stalwarts, which is just fantastic and very exciting.

As well as pattern brands there are also a number of books including those by Wendy Ward and Everyday Style by Lotta Jansdottir with a real cross-section of models in them. 

There are a few other companies like Maven and Alice & Co who don’t use models at all, just illustrations or mannequins but they are super-supportive and involved in our community and constantly share and repost. Let’s be honest here, most of us are pleased to get a like or a repost because it gives us a little boost that the designer noticed us, we can all gain ideas and inspiration from others, and we want to see the garments being worn by people who are similar to ourselves in some way. The pattern companies which do notice us have then tended to become very popular with SO50 followers, it’s that virtuous circle again. 

We think there’s a small element of change happening but there’s a long way to go, though there are more companies than just the ones I’ve had time to mention here and there’s always room for more. 

I’m always happy to share the knowledge and experience I have from many years of sewing, and I know of many others who are too. It’s fantastic to be a part of this worldwide sewing community and it’s diversity is vital so if we can encourage a few more indie brands to look beyond the young, slim, white stereotype then that can only be a positive thing right? 

Enticing us to spend our grey pounds (or dollars) is a good reason to check out what the followers of SewOver50 are up to especially as there are now almost 20,000 of us! And I will often write honest reviews of patterns or fabric over on my blog which you might find interesting too, I like to think I’m a critical friend. I would encourage anyone to look at the #sewover50 hashtag because there are now tens of thousands of images to inspire you.

Anyway, I hope you’ll enjoy the rest of the Sewing Weekender wherever you are, and I hope whatever you’re sewing is going well, with any luck we will have opportunities to meet again in real life before too long, I do hope so. I love going to meet-ups and being able to chat with fellow sewers, and filming myself like this is a first for me so I hope it’s made a bit of sense! 

Thank you again to Kate, Rachel and Charlotte, 

Bye bye etc etc…

I spent both days of the Weekender on a video call with two of my sewing buddies Melissa Fehr and Elizabeth Connolly, I met them both originally at the first Weekender and we’ve all been fortunate enough to go to every one since, we weren’t going to let a pandemic stop us this time! I made another Camber which was one of the projects I cut out on my recent batch cutting splurge and I added a machine embroidery stitch from my Pfaff Quilt Ambition 2.0.

Me, Melissa and Elizabeth on Melissa’s phone perched in her workspace!

Over the course of the weekend over 1900 people joined in by buying a ticket, and all the profit from ticket sales which totalled over £23K were donated to four fantastic charities, NHS Together, Mind, Stephen Lawrence Trust and Black Lives Matter.

If you’ve ever read any of my previous blog posts you’ll know I really enjoy going to meet-ups so not being able to do this for the last few months has been sad to say the least, with luck it won’t be too much longer though. To my mind, this year Charlotte, Kate and Rachel have successfully created the next best thing because everyone could sew whenever and wherever they were in the world. Some did as I did and had group chats going on, two sewers I know set up their machines on trestle tables in the garden (suitably distanced of course!) others were solo but had all the video content to keep them company or by using the #sewingweekender hashtag, some didn’t/couldn’t really join in with sewing on the day for one reason or another but took part in the giant Zoom at the end of Saturday, or early afternoon on Sunday. The Zoom was fantastic because it made me realise just how many people from all over the world had been participating including the US, Canada, Germany, Norway, Israel and Australia, and hearing so many shout-outs for SewOver50 from them was even better! Everyone, whatever their situation or circumstances, had the opportunity to buy a ticket-which was essentially a charitable donation anyway-it will be interesting to see if this is a format that could be repeated in the future to make the event inclusive worldwide. Were you ‘there’? what did you make of the concept, and was it preferable in some way to the real life event for you, or not as good? I’d be interested to hear your thoughts

Until next time, happy sewing,

Sue

Simple Sew Chelsea Collection blouse hack.

A lot has happened since I wrote my last Simple Sew blog post, Christmas for one thing, and I had a lovely holiday in the sunshine too but now we are all confined to our homes because of Covid 19. Without wishing to trivialise the gravity of this situation, one of the side effects of it is that you might have more time to sew. 

I’ve had a rummage through my Simple Sew patterns to find one which I haven’t already shown you, and which has opportunities to hack, and I settled on the Chelsea Collection. This is a capsule wardrobe of a short sleeve blouse with two variations, a pair of trousers and a button-front skirt in two lengths. I liked the blouse with it’s shirred sleeves and keyhole back detail but I decided to mix it up a little by adding a button front. Normally we are able to select fabric from a couple of generous sponsors but I wanted to ‘shop my stash’ to find something this time. I found a very pretty vibrant floral John Kaldor cotton lawn which I think I picked up from a swap table sometime and I knew would work well for the blouse. 

I didn’t want the blouse to be overly tight so, after checking my measurements I opted for a larger size than I’ve made previously. If you’ve been a regular reader of my posts you’ll know that I tend to check Simple Sew patterns for any discrepancies before I start. There didn’t seem to be any glaring ones but I just added a slight curve to the back hem so that it dipped in the same way as the front and I trued the shoulder seams so there was a smooth flow from front to back. 

Adding a curved hem to the back, I measured the distance from the lengthen/shorten line on the front then made the back the same amount, curving the line gently upwards to the side seam.
trueing the shoulder seams

As I wanted to alter the front significantly I had to make some changes there first. In order to create a button-stand I simply added 2.5cms to the centre front all the way down what would have been the fold. [2.5cms was a fairly arbitrary figure because it depends really on what size buttons you’re using, a general rule of thumb is that the bigger the button the bigger the button-stand needs to be so that there’s enough overlap and the garment doesn’t end up too tight because the overlap isn’t big enough.]I was able to do this by drawing directly onto the tissue before cutting the piece out as there was enough space to do so.

adding the button stand to the front

If you’ve already cut a pattern that you want to add to just stick some extra paper to the centre front fold line, or trace off the whole piece again adding the extra. The original front had a facing for the neckline so now I needed to create a new facing which would neaten both the neck edge and the button-stand. To do this I simply traced off the whole of the new front opening including the neck edge and made the facing a depth of 7cms all the way down from shoulder to hem, with a smooth and gradual curve. The photo should make this clearer. The back neck needed a new facing too because the existing one took the armhole into account. Again I traced off the section I needed making it 7cms at the shoulders to match the front facing. 

The final change I made was to lengthen the sleeve a little and add some more fullness to it. I started by making the sleeve 5cms longer and then I drew 3 vertical lines on the pattern at approximately the front notch, back notch and shoulder seam points. [Depending how much extra fullness you want to add to a sleeve you could use more places than this but do try to space them evenly apart.] Next I cut up each line from the bottom until I reached almost the top, I left this very slightly attached. With the piece flat on the table I spread the bottom of each slit by about the same amount, probably about 4 cms, then taped slithers of paper into each gap.

First I added the extra length and then drew the vertical lines where I wanted the extra fullness.
Next I opened each part to add the extra being careful to keep the pieces flat and not twisting or wrinkling up, put extra pieces of paper under the gaps. Once you’re happy tape them in position,
Once I had added the extra I cut the piece out.

If you don’t want to cut the pattern up you can do the same process by still marking the vertical lines on then pivoting the uncut pattern at the top of each line, use a pencil or your finger as the axis. Draw or trace around the first section, which remains stationary, then each subsequent section after you pivot it to so that you get the extra fullness being added at the hem. Opening up the wedges in this way means you’re adding fullness to the hem but not the crown of the sleeve, if you want extra fullness in the crown spread the whole piece more or less parallel. The grainline should run equidistant down the centre of the new piece (unless you want to cut it on the bias)

Having done all this I cut it out and was ready to sew! 

I started by joining the shoulder seams of both the blouse and the facings (which I’d interfaced and neatened) then I attached the facings to the neck edge, turned, understitched and pressed. The keyhole back calls for a small rouleau tube as a button-loop which needs to be inserted at the same time as applying the facing although you could choose to make a hand sewn thread loop and stitch that at the end. In fact it isn’t even vital that this is a functioning loop if you’ve got a front opening, the keyhole is purely decorative now. 

I put the blouse onto Doris to check it was looking OK and this was when I found that the keyhole appeared to be bagging outwards quite significantly. I decided not to do anything at this point and I would check again once I had sewed the side seams and put the sleeves in, then I would get a better idea by trying it on myself. 

Checking the front neck
With the loop pinned I discovered that the keyhole didn’t sit flat.
It seems to stick out quite significantly on Doris.
If the button isn’t done up it would look like this.

I made three rows of shirring on the sleeves next, using my quilting guide to make sure the first row was 5cms from the bottom edge, the next two rows were then sewn parallel to the first. [Refer to a previous blog post on how to sew shirring if you haven’t done so before] Next I sewed up the sleeve seams and pin-hemmed the bottom edge to give a neat finish.

I positioned the needle 5cms from the cut edge and the quilting guide helps me as a visual marker to keep it parallel all the way.
Shirring is stitched from the right side so that the elastic is on the reverse. Use a long straight stitch, secure both ends and then apply plenty of steam to shrink up the stitching further.
finished sleeve

After sewing up and neatening the side seams I inserted the sleeves. At this point I tried the blouse on again to check the keyhole on myself and, with real shoulder blades under it, it didn’t seem so noticeable. Two other things struck me though, the blouse was a little too big so I took it in on the side seams and also the blouse was a bit shorter than I expected. In order to take as a small a hem as possible I made some bias binding from offcuts of the fabric then stitched it (folded in half lengthways and with the cut edges together) to the hem using a narrow 5mm seam allowance [This is a useful finish to any hem or edge where you need every spare centimetre of fabric.] Have a look at the photo which shows you how to get the ends of the binding enclosed within the front facing. I turned the binding up and top-stitched in place. 

If you’re adding binding when there’s also a facing pin it like this so that the end is neatly enclosed inside the facing when it’s turned right side out.

Finally, I found some ‘vintage’ buttons amongst my treasure trove and there were just the right number meaning the whole blouse had been sourced from what I already have!

Well I hope now that I’ve made it that I’ll have a chance to wear my Chelsea blouse somewhere other than in my own garden this summer, who knows? Maybe you’re reading this long after the emergency ended and life has returned to some sort of normality, although it definitely won’t be exactly as it was before.

Sewing our own clothes is an activity which gives us so much enjoyment for a variety of different reasons and, right now, the simple act of creating something is chief amongst them for me. It’s absorbing and the problem-solving gives me something else to think about.

I think the keyhole back is, by and large, just about acceptable when I’m wearing the blouse. I also think the cure could be to add a centre back seam instead of cutting on the fold so that the point of the keyhole could extend beyond the centre back line, this would hopefully bring the button and loop closer to one another when they are done up…this is just my theory based on experience and I haven’t tried it out. It’s such a nice little detail that I’m disappointed it hasn’t worked out quite right. I also regret not reading my fellow Simple Sew bloggers reviews of the blouse because then I would have known how short it comes up, personally I would add a minimum of 8-10cms to the length next time.

The sleeves are pretty and feminine but maybe they are a little too girly, the jury is out…

Until next time, happy sewing

Sue

Trend ‘Square’ dress in Selvedge and Bolts linen.

If you’ve read my blog in the past you’ll know I’m a fan of Trend patterns. Lucy is a pattern-cutter and designer based in London and I always make a bee-line for her stand when I go to the Knitting & Stitching shows. At the show last autumn I fell for the Square dress which, as the name suggests, has a square hem and diagonal seams. There are no bust darts because it uses bias cutting to create the fit and because there are no fastenings it’s actually a fairly quick make and would suit a dressmaker with a little bit of experience. If the lack of darts might cause you a problem I definitely suggest you toile the top half of the dress so that you can assess whether you personally need to carry out a Full Bust Adjustment (FBA) Lucy has been working hard to extend the size range across her patterns and as one of the newer styles the Square (TPC23) comes in the more extensive range sizes 8-22.

I bought a copy of the Square (and a skirt pattern too) and shortly afterwards my friend Dibs who owns Selvedge & Bolts online fabric shop asked if I’d like to choose some fabric as a gift in order to write a review of it. So with this pattern in mind, and my upcoming holiday, I picked out a fine linen in a tiny red/white ‘checked’ print. I was so happy with it when it arrived and it’s perfect for this loose type of style.

Before I cut into the beautiful linen I decided to make an initial version in some checked flannel which, at a guess, I’ve had over 25 years in my stash! You can’t rush these things…

Normally I’d try very hard to pattern-match the checks but there wasn’t enough to do that. The seams on the dress run diagonal but in fact only the back and front bodice are cut on the cross, the other rectangles of the skirt are cut on the straight grain so it’s much simpler than you might think to cut and sew together. The pieces are all quite large so there’s not much opportunity to cut many corners, and I didn’t quite have as much of the flannel as was recommended so I reduced the lower skirt panels (front and back are the same for this and the upper skirt panels, the front and back bodices are different though) To reduce the panel I simply folded out a parallel section through it’s longest side. This turned out to be advisable because at 5’5” the points would have touched the ground unless I was wearing high-ish heels.

I folded out a parallel 5cms segment of the lower skirt panel to reduce the overall length of the dress.

I cut a straight size 14 and made no other adjustments, the front and back are cut on single fabric and as they are asymmetric you’ll need to keep any directional-print in mind, especially if you reverse any pattern piece to fit it onto your fabric . It’s a straightforward make though so after the cutting out it’s a breeze. I would only suggest that you take care when pinning and sewing the diagonal sections together to avoid stretching the edges out of shape before you sew them. Keep everything flat on a table as much as possible while you do this part. The hem is a deep ‘grown-on’ one which you mitre at the points and this helps give the skirt it’s weight and fluidity. I was happy with the flannel version so I immediately cut the linen one ready to sew up.

The linen sewed together beautifully, it’s quite lightweight and with a lovely drape. As the seams are such a feature of the dress I decided to use one of the decorative stitches my Pfaff Quilt Ambition 2.0 has to offer. After trying a few I picked out a sort-of diagonal grid design which echoes the print on the fabric.

I’m really pleased with how the linen dress has come out, the decorative stitches are perfect for accentuating the seams and it’s such a comfortable style to wear. I’ve worn the flannel version mostly with a roll-neck jumper over the winter, it’s very striking and has garnered many compliments. the linen had to wait until we had our recent holiday to be worn but it was perfect for warm weather and, best of all, it has pockets! I can’t wait to be able to wear it again in the UK…

The shoulders are designed to be wide so there’s plenty of bra-strap coverage if you need it.
You can see the deep hem in this shot, it’s ‘grown-on’ not a separate facing and you mitre the points at the front and back. This helps give the skirt a lovely weight and fluidity.

This such a simple-looking pattern but has so much scope to add drama, it’s distinctive without being outlandish and still be completely wearable…at least I think so!

Until next time,

Happy sewing

Sue

Maxine Sweater by Dhurata Davis

I first met pattern maker Dhurata Davies at my friend Sal’s ‘Sew2gether’ event last spring and then our path’s crossed again unexpectedly a couple of months later when I made a last minute decision to go to the Threads textiles fair in Farnham. Dhurata was exhibiting there and she offered me a copy of her Maxine Sweater pattern in return for a review. The pattern is intended as a sweatshirt, and I’ve made one in a jersey fabric already, but it also works well in a woven too. It was the diagonal seam lines with pockets concealed in them that appealed to me. The sweatshirt version was for a Minerva fabric blog review which hasn’t appeared yet at the time of writing but now that I’ve made a second top I can tell you all about the pattern here.

I had picked up a modest remnant of ‘Woolsey’, a linen/wool fabric in the Merchant & Mills shop in Rye last August, it’s a lovely deep teal colour which is one of my favourites (although it’s a devil to photograph accurately). When I made the jersey version I made a size 16 based on my body measurements and there’s plenty of room in it so I knew I could risk making the same size in a non-stretch fabric. [If you are making anything more usually intended for a fabric with some stretch you will almost certainly need to go up a size or two, especially if it’s in any way close fitting. Measure the pattern itself if you’re not sure and don’t forget you need to be able to get it on, will it need additional openings like a zip or buttons if there’s no stretch to get it over your head, or your hips?] 

Before I cut anything out I made myself a ‘whole’ sleeve pattern piece, it comes as a ‘half’ sleeve vertically so this needs to be placed on a fold in the fabric (twice as you need two sleeves!) but I always prefer to have a complete sleeve. Just stick the pattern to a large enough piece of paper so that you can fold it down the central ‘place on fold’ line, fold it in half and pin in a few places then cut out a new symmetrical pattern piece. 

I knew I would not have enough fabric for the separate collar, cuffs and hem-band pieces but I could lengthen the body so that it wasn’t ridiculously short. I added about 10-12cms to the bottom of the front and back pieces. I had to decide how to finish the neckline instead of the collar and I came up with a combination of piping directly on the edge first and then a band of jersey ribbing. I didn’t know how, or if, this would work but the piping would look fine on it’s own if the jersey wasn’t any good. 

The instructions and illustrations are nice and clear and straightforward and it’s not as difficult as you might imagine to get the diagonal cross in the centre. The seam allowance is just 1cm so I always highlight the pattern when this is the case so that, when I make the pattern again, I don’t sew it up as 1.5 by mistake and it’s all too small! 

the centre cross close-up on the outside.
and on the reverse.

Once the front was complete I joined it to the back at the shoulders and then made some bias binding for the neck. I had just enough scraps to cut 3 strips which were approximately 50cms long and 4cms wide which I joined to form one long strip. I have a specific piping foot for my Pfaff Quilt Ambition 2 which is really useful but you can usually use your zip foot if it allows you to stitch close enough to the piping cord. Not all zip feet are good at this especially if it’s the generic one which comes with the machine but there are usually adjustable ones you can buy which, in my experience, are better. The piping foot actually sits over the top of the fabric and piping cord rather than just beside it so it’s held more securely and stitches much closer to the piping for a better finish. If you want to see another use of the piping foot pop over to my review of the Simple Sew Lizzie dress.

this is the piping foot actually sitting over the top of the band as well as the piping too.

Once I’d made the piping I sewed it around the neck, raw edges together and making a neat join at the back. I knew I wouldn’t be able to find a matching jersey so I opted for a complete contrast. I bought 50cms each of deep red and dark grey tubular jersey from Backstitch and when I put them together I decided that the red made a more interesting garment. Generally when you’re adding a stretch band you work on the basis of it being approximately 85% of the neckline/cuff/waistband measurement that you’re attaching it to, depending on the stretch of the jersey. I’d made things tricky by adding the piping first so the machine had to go through a LOT of layers of fabric. I must say that the Pfaff sailed through it all pretty easily. The only time it was hard work was over the seam allowances on the cuffs. Because I was making this bit up as I went along I sewed the piping onto the cuff first then sewed the under arm seams, if I were using this finish again I would sew the under arm seam first and then put the binding on ‘in the round’ because it would be less bulky where it crosses the seam. I used my little seam-hopper gadget to help lift the foot to help ease it over the bulky seams, this one came with the machine but you can buy something called a Jean-a-ma-jig or even use a piece of thick folded cardboard.

On the left the cuff is folded and stitched and then folded again on the right. I ran a row of wide zigzag around the raw edges to keep them together before sewing them onto the cuffs. The neckband is done the same way.
you can see it’s all a bit of a tight area to work in but the finished effect was worth it I think. The jersey has to stretch as it’s sewn onto the woven non-stretch fabric.
this is inside the cuff, as you can see it’s quite messy and bulky but the little plastic gadget will help to ‘leapfrog’ over the seam. With the needle down to prevent it from moving stop just ahead of the seam, lift the presser foot and slide the gadget underneath the foot with its ‘toes’ either side of the needle (it can be from the front or the back depending which you’ve got better access to) and then lower it back down so the presser foot is resting on the gadget. The foot should now be on a better level to sew over the seam, sew forwards a few stitches until you’re clearing the seam then move the gadget around to the front (if you’ve had it at the back) and place it under the foot there. Come slowly forwards a few more stitches until you’re completely clear of the seam and back on level sewing again, always taking care that the needle doesn’t hit the plastic.
the finished cuff

Having told you 85% is the usual amount for a stretch bands I should have made the neck one slightly shorter than that as it doesn’t sit completely flat even after a good amount of steaming. I left it though because it doesn’t look that bad and it would be a lot of work to re-do it. First join the band into a loop along it’s narrow edge then fold it lengthwise in the same manner as the cuffs and then divide it into 4 equal parts marked with pins. Next equally divide the neck (or cuffs) equally into 4 too. Pin the band onto the neck (or cuff) at the marks and stretch the band to fit and stitch in place. You can see from the photos that this was quite tricky because of the number of layers involved, I graded the layers so that it reduced the bulk as far as possible. All these layers plus the piping cord made it too difficult to get the cuffs under the overlocker so I finished the edges using a simple zigzag stitch. Around the neck I used the Coverlock 3.0 to coverstitch which had dual benefit of neatening on the inside and giving an attractive double row of top stitching on the outside. 

the jersey band is very slightly wavy which suggests it’s fraction too long but it was too much hassle to take it all back off again and, frankly, CBA!
this is the coverstitching from the outside, the piping made it really difficult to get closer as the width if the foot wouldn’t let it get any nearer. Incidentally, I tried this out on a small sample piece first so that if it all went horribly wrong I didn’t ruin the whole garment. I strongly recommend that you make samples of any new or unusual techniques you may want to try so that you don’t spoil all your good work, it’s worth the bit of extra time it takes.
the coverstitching from the inside, it served the double purpose of top stitching on the outside and neatly covering the raw edge on the inside. I’d trimmed and layered all those edges first to reduce the bulk.

To finish the hem I just overlocked the edge, turned it up and stitched twice. So that’s it really, I’m very happy with the finished top, I layered it up with a thin RTW T-shirt when I wore it to go to Brighton recently. The fabric doesn’t seem to crease so much as bend, it’s of a double-weave construction the same as cotton double gauze. 

pre-crumpling and modelled by Doris

I’m really happy with the outcome of this top, the fabric has lent itself well to the more smocky kind of shape and although it was bit involved I really like the finished effect of the addition of the stretch cuffs and piping onto an otherwise simple garment. The ‘Woolsey’ fabric does fray a bit because of the loose weave but it’s manageable. Incidentally, this pattern looks great lengthened into a dress or with the pockets left out of the seams if you’re short of fabric.

Thank you Dhurata for the gift of the pattern, in my opinion it’s a goody and if you aren’t adding extras like me it’s a nice quick half-day make. Dhurata has also designed some lovely children’s patterns too which you might be interested in.

Until next time, happy sewing

Sue

Simple Sew Amelia tea dress hack.

The Amelia tea dress isn’t one I’ve sewn before but Jane who comes to my sewing class had made one last summer and I remember liking the shirred elastic midriff section. The brief for our makes this time was ‘festive’ (we usually don’t have a brief, it’s free-choice) Bearing this in mind Bobbins n Buttons had offered to provide me with fabric so I had a browse on their website and selected the Lady McElroy ‘beauty and the bees’ stretch velvet. 

The pattern isn’t intended for jersey but it is simple shapes and a bit of gathering which I knew would still work well, what you don’t want is a fabric that’s too thick or stiff though because the shirring won’t work properly. I planned to hack the pattern a bit so I decided to add long bishop sleeves as it’s winter, I also lengthened the skirt (more on that later) and of course I added pockets! 

Because of the distinctive large print I opted to remove the centre back seam and put the zip into the side seam instead, this was to save me the hassle of trying to pattern match the print across the zip. Because I’d removed the CB seam in the bodice I took it out of the skirt too, for the same reasons. If you’ve got a tricky print to match over a seam like this consider whether you can move the zip to the side, it’s not much different to put in and the opening can be a little shorter but still give you sufficient room. Now I could have a line of bees central down the back (and front of course) and just needed to get a good horizontal match too for me to be really happy.

As I said before I wanted the skirt as long as possible but there needs to be a compromise between length versus flare because of the width of the fabric. If you want the skirt to be longer you’ll need to reduce the amount of flare at the hem because you’ll be restricted by the fabric width. The wider the fabric then the more scope you have. I measured how long I could make the skirt before it would need reducing at the hem and decided it would be an acceptable length. I could add around 10cms to the hem making sure the new side seams were at a right angle to each other so that the hem will run in a smooth lineI traced around a few bees where they crossed the cutting line so that I could ensure the front and back matched as well as possible. 

In order to cut everything as efficiently as possible from the fabric I first cut the skirts against the main fold-don’t forget to exclude the CB seam or the piece will be bigger than your back bodice (if you’re excluding the zip) 

Then I refolded the fabric with the selvedges into the centre to cut the bodice pieces on the folds. This is vital to get those bees running down the centre. 

From the remaining fabric I cut a pair of long sleeves. I used the pattern from another design I’ve made a few times, I measured the armhole of the dress and compared it against the sleeve I have. It was a little smaller at the crown so I added a small amount to give it sufficient widthFinally, because it’s jersey, I chose to use a neck binding instead of the facings so I cut two narrow strips which were each the same length as the CF to CB measurement of the neck plus a couple of centimetres seam allowance. 

I increased the sleeve head by 2cms, moving it out by 1cm either side of the shoulder notch.
It’s important to keep the sleeve level when you add the extra width so draw a line at a right angle to the grainline, then move the pattern piece 1cm in each direction using the line as the axis.

Ok, so I mostly followed the instruction with a few minor changes because of my alterations. One thing I did first of all was to stabilise the back shoulder seams and the left side seams where the zip was going to go with iron-on interfacing because I don’t want them to stretch out of shape. I chose to leave the back darts in although I possibly could have eased them out as it’s a stretch fabric.

stabilised side seam before the zip goes in.

After joining the shoulder seams I added my neck binding. I folded the strips with RS out along the long edge-I didn’t join them to each other at this stage-then, starting at the V, I stitched just that section into place. This way you can sew just a small part, snip into the V and pivot at the corner more accurately. When I was happy with this I sewed the rest of the binding on leaving just the CB part unsewn, then I could join the two strips in the right place and finally attach it to the neckline. Finally I neatened the edge all the way around and then topstitched it down close to the seam to stop it rolling. 

The next part is the shirring which really isn’t difficult so don’t panic. First wind shirring elastic onto an empty bobbin BY HAND stretching it very slightly as you go, put it into the machine in the usual way (you may wish to check the manual if you have an older machine in case there is anywhere else you need to thread the elastic through) Use your matching colour thread on the top in the usual way and lengthen the stitch slightly, it doesn’t need to be zigzag or anything though. Definitely try out a test piece first and don’t forget to secure the start of each new row so that the stitching doesn’t come undone. I don’t secure the other end at this stage though in case I find I need to pull the threads up any more later. You should be able to sew 8 rows of stitching parallel to each other to complete the strip. The fabric will naturally pucker up pretty well but when you’re done stitching hover the iron with plenty of steam over it and you’ll find it gathers up some more as a result. Finally knot the ends of the threads to secure.

Then you need to attach the gathered band onto the lower part of the bodice making sure it’s evenly divided as you go.

Attaching the shirred waist section to the upper bodice.

Attach the skirts (I’d sewn the pocket bags on to each side seam before doing this. I just use my handy cardboard template which I made ages ago, I just trace around it directly onto the fabric and cut out.) 

Next the zip goes into the left side seam. I sew it here out of habit as I’m right-handed and find it easier to do up that way but put the zip in whichever side works for you. After neatening both side seams separately first I sewed up the top of the side seam by about 4cms from the armhole edge. I used an invisible zip and inserted it in the usual way, making sure the waist seams matched, and then joining the rest of the side seam once I was happy with the zip insertion. I sewed up the other side seam and I was ready to tackle the sleeves.

The sleeves are set-in so I made the elasticated cuffs on the flat first using straight strips of jersey the same length as the curved cuff edge. With the strip open and RS together I sewed it once. 

Then I folded the strip in half and sewed it on the overlocker to create a channel.

 This will turn downwards to form the cuff which I slotted wide elastic through, securing at both ends. 

Finally, I sewed the underarm seams to create the sleeves which are inserted into the dress as per the instructions. 

All that’s left to do is the hem which I sewed on the coverstitch machine which is on loan to me by Pfaff at the moment. 

I’m really pleased with how the dress has turned out, it’s very swishy and has a slightly 1940’s vibe to it. I like the extra length on the skirt and the sleeves look fab. I was a little alarmed when I saw the large scale of the print but actually I really rather like the bees now. One thing I’m not keen on (and this is down to the manufacturer and not the supplier) is that they have printed a black background design onto a white base cloth. Because the cloth has a pile it means that anywhere there are joins there is a slight hint of the white showing through which is not ideal. The velour isn’t too tricky to work with as the pile is a bit flatter than velvet but it does still ‘creep’ a bit in places so if you’re in any doubt that pins aren’t enough to keep it all in alignment make sure you tack (baste) seams together. If you have a walking foot I would definitely advise using it. 

Lots of pictures swishing about!

I hope this will help you to feel inspired and perhaps have a go at ‘hacking’ a pattern for yourself. This was a very simple one but if you look at my Simplicity blouse hack you can see just how carried away it’s possible to get!

Until next time, happy sewing

Sue

Pfaff Coverlock 3.0

It’s been almost a month since I was loaned a Pfaff Coverlock 3.0 to try out so thought I would give you a ‘half-term report’ on how I’m getting on with it.

First thing to say is that it’s quite a beast! It’s a very substantial piece of machinery and so is fairly heavy as a result. That being said, this is normally the case with coverstitch machines because they are generally bigger than overlockers so the weight isn’t unusual. It does have a good-sized and comfortable carrying handle though.

Ok, so, the Coverlock 3.0 is a combination machine in that it is both an overlocker and a coverstitch machine. I’m sure you already know that an overlocker will trim and neaten raw edges and often sew the seam as well if you have 4 or 5 thread version. What you may not know is that a coverstitch machine doesn’t trim any edges, it will sew two or sometimes three rows of top-stitching on the outside of a garment whilst covering the edge of the fabric on the inside with loops of thread to ‘cover’ it. It has the advantage of being stretchy too. If you’re still not sure what I’m talking about have a look inside the hem or cuffs of a RTW jersey garment and you should see.

The first thing I had to do was not only rethread the machine as it didn’t arrive pre-threaded but I also needed to change it’s function from coverstitch to overlock. A major part of what I want to assess for you is how quick and straightforward it is to go between the functions. This is partly why I didn’t plunge in with a review as soon as I got it because I didn’t think it would be balanced or fair. Indeed, I will certainly write another review in due course after a decent amount of time and usage has occurred.

Yay! I threaded it successfully!!

Because the machine was merely delivered to me without any demonstrations I’ve needed to use the instruction book a fair bit. If you have difficulty following written instructions and/or diagrams this may not be ideal for you but there is a (silent) DVD included with very clear animations of exactly what you need to do for each of the stitch variations possible. [I didn’t find this straightaway though so I muddled through with the booklet! I’ve also since found a few very helpful You Tube videos which were useful]

I’m not going to lie, it does take a bit of time to make the changes because you’ll need to remove and reinsert the needles to different positions as well as thread the machine in different ways depending on the function. This will eventually take me less time and I’ve added Post-it notes to the relevant pages in the book so that I don’t have to keep searching for the two I’ve favoured most. The machine is capable of up to 23 stitches using 2, 3, 4 or 5 threads and up to 3 needles. So far I’ve only used the 4-thread overlock and the coverstitch but I will endeavour to use more, including the flatlock, and report back.

I decided on making a hacked version of the Tilly and the Buttons Nora top which I’ve made a couple of times before as I didn’t want any nasty complications by attempting an unfamiliar pattern with a new piece of machinery!

The beautiful jersey with an amazing ‘tie-dye’ print is from Lamazi fabrics and was my choice as a July/August maker of the month [it could be you if you tag them on Instagram] I cut the sleeve to approximately 3/4 length and also cut two cuff pieces which were again approximate, initially about 20cms in length and then my wrist measurement at one end and my mid-forearm measurement at the other. I added a couple of centimetres for seam allowance to all sides.

I’d definitely say you need to do a bit of forward planning if you intend to use both the overlock and coverstitch functions on a project because of the swapping between the two. For example, on my Nora I needed to coverstitch just the cuffs and the hem, everything else could be sewn either directly using the 4-thread overlock or on my Quilt Ambition 2.0. I opted to sew the top together first and complete the hems at the end, in the usual way although there may be times when it’s better to hem first, we’ll see.

I’ve been very impressed so far with the quality of the different stitches.

If you’re merely changing the thread colours it can be done in the same way as regular overlockers by snipping the threads near their spools, tying on the new colour and pulling each of them gently through, plus rethreading the eye of the needles. On one occasion when I altered the function I completely rethreaded but the stitch was much too loose-what had I done? It was all done correctly and yet it was way too loopy. I checked the manual for hints on troubleshooting but it didn’t make much difference. I was starting to pull my hair out when I realised I had threaded the machine without lifting the handle out of the way-the threads MUST go under it or they don’t sit in the tension discs! (Had I watched the helpful YouTube video first I would have known this…) Another thing I learnt the hard way was when the spool holder kept falling off the back of the machine and I was ready to chuck it out of the window I noticed it has to be slid sideways to click securely in position-doh!

The next two projects I made I didn’t use the coverstitch function as both the sweatshirts had cuffs and waistbands but I constructed much of them using the 4-thread overlock stitch. I used fabric provided to me by Minerva and they will appear on their blog in the new year. One of the patterns I used was the gorgeous Maxine sweatshirt given to me by it’s designer, Dhurata Davies. I’m going to make another one soon so I’ll write an individual blog on it then. [I got both tops out of 2.5m of fabric!]

For the final project I want to talk about here I took a different approach. It’s an Amy top by Brilliant Patterns and which I’ve made a couple of times before. I had a 1m remnant of loop-back cotton sweatshirting which I bought from Sew Me Something at a show for £8 and by shortening the sleeves very slightly, cutting the neckband in two parts and joining it I got a WHOLE sweatshirt out of the one metre!!

This time I set the machine up with a wide 2-needle coverstitch and I used my regular sewing machine to sew most of the seams. What I did at each stage of construction was to press the seams flat and top stitch them using the Coverlock. This meant that there would be two rows of top stitching on the outside and the raw edges were covered on the inside. This was generally OK although as I’ve yet to ‘get my eye in’ with lining up the foot against a seam or other visual marker a couple of them do waver more than I would usually like. It turns out there is a large removable flat bed included to increase the working area (it was tucked down inside the box and I’ve only just found it!!) this will support your work while you sew but it does take up a bit more room.

I like the two-part upper back of the Amy.
The hem is level at the front and a dipped curve at the back.

So to sum up (for now) I’ve been impressed with the quality of the stitches I’ve used so far on the Coverlock 3.0 and I will definitely look for opportunities to try others whilst I have it. I’ve yet to be convinced about swapping between the stitch-types but obviously, as I get more familiar with it, I should get faster at changing between them. There are few processes which have to be gone through to make the changes but I’ll probably work out an order or procedure to follow to speed it up. If you are short of space a combination machine might be useful, they aren’t cheap though. You’ll almost certainly use the overlocker stitches more of the time so possibly changing occasionally to coverstitch will be sufficient. I would definitely say you should have a thorough demonstration of the machine so that you know what is involved and what it is capable of. Unlike washer/driers which don’t do either job very well this machine does both functions to a very high standard.

Thank you to Pfaff for giving me the opportunity to try out their machine and if you have any questions about my experience so far then do ask.

Happy sewing

Sue