Simple Sew Amelia tea dress hack.

The Amelia tea dress isn’t one I’ve sewn before but Jane who comes to my sewing class had made one last summer and I remember liking the shirred elastic midriff section. The brief for our makes this time was ‘festive’ (we usually don’t have a brief, it’s free-choice) Bearing this in mind Bobbins n Buttons had offered to provide me with fabric so I had a browse on their website and selected the Lady McElroy ‘beauty and the bees’ stretch velvet. 

The pattern isn’t intended for jersey but it is simple shapes and a bit of gathering which I knew would still work well, what you don’t want is a fabric that’s too thick or stiff though because the shirring won’t work properly. I planned to hack the pattern a bit so I decided to add long bishop sleeves as it’s winter, I also lengthened the skirt (more on that later) and of course I added pockets! 

Because of the distinctive large print I opted to remove the centre back seam and put the zip into the side seam instead, this was to save me the hassle of trying to pattern match the print across the zip. Because I’d removed the CB seam in the bodice I took it out of the skirt too, for the same reasons. If you’ve got a tricky print to match over a seam like this consider whether you can move the zip to the side, it’s not much different to put in and the opening can be a little shorter but still give you sufficient room. Now I could have a line of bees central down the back (and front of course) and just needed to get a good horizontal match too for me to be really happy.

As I said before I wanted the skirt as long as possible but there needs to be a compromise between length versus flare because of the width of the fabric. If you want the skirt to be longer you’ll need to reduce the amount of flare at the hem because you’ll be restricted by the fabric width. The wider the fabric then the more scope you have. I measured how long I could make the skirt before it would need reducing at the hem and decided it would be an acceptable length. I could add around 10cms to the hem making sure the new side seams were at a right angle to each other so that the hem will run in a smooth lineI traced around a few bees where they crossed the cutting line so that I could ensure the front and back matched as well as possible. 

In order to cut everything as efficiently as possible from the fabric I first cut the skirts against the main fold-don’t forget to exclude the CB seam or the piece will be bigger than your back bodice (if you’re excluding the zip) 

Then I refolded the fabric with the selvedges into the centre to cut the bodice pieces on the folds. This is vital to get those bees running down the centre. 

From the remaining fabric I cut a pair of long sleeves. I used the pattern from another design I’ve made a few times, I measured the armhole of the dress and compared it against the sleeve I have. It was a little smaller at the crown so I added a small amount to give it sufficient widthFinally, because it’s jersey, I chose to use a neck binding instead of the facings so I cut two narrow strips which were each the same length as the CF to CB measurement of the neck plus a couple of centimetres seam allowance. 

I increased the sleeve head by 2cms, moving it out by 1cm either side of the shoulder notch.
It’s important to keep the sleeve level when you add the extra width so draw a line at a right angle to the grainline, then move the pattern piece 1cm in each direction using the line as the axis.

Ok, so I mostly followed the instruction with a few minor changes because of my alterations. One thing I did first of all was to stabilise the back shoulder seams and the left side seams where the zip was going to go with iron-on interfacing because I don’t want them to stretch out of shape. I chose to leave the back darts in although I possibly could have eased them out as it’s a stretch fabric.

stabilised side seam before the zip goes in.

After joining the shoulder seams I added my neck binding. I folded the strips with RS out along the long edge-I didn’t join them to each other at this stage-then, starting at the V, I stitched just that section into place. This way you can sew just a small part, snip into the V and pivot at the corner more accurately. When I was happy with this I sewed the rest of the binding on leaving just the CB part unsewn, then I could join the two strips in the right place and finally attach it to the neckline. Finally I neatened the edge all the way around and then topstitched it down close to the seam to stop it rolling. 

The next part is the shirring which really isn’t difficult so don’t panic. First wind shirring elastic onto an empty bobbin BY HAND stretching it very slightly as you go, put it into the machine in the usual way (you may wish to check the manual if you have an older machine in case there is anywhere else you need to thread the elastic through) Use your matching colour thread on the top in the usual way and lengthen the stitch slightly, it doesn’t need to be zigzag or anything though. Definitely try out a test piece first and don’t forget to secure the start of each new row so that the stitching doesn’t come undone. I don’t secure the other end at this stage though in case I find I need to pull the threads up any more later. You should be able to sew 8 rows of stitching parallel to each other to complete the strip. The fabric will naturally pucker up pretty well but when you’re done stitching hover the iron with plenty of steam over it and you’ll find it gathers up some more as a result. Finally knot the ends of the threads to secure.

Then you need to attach the gathered band onto the lower part of the bodice making sure it’s evenly divided as you go.

Attaching the shirred waist section to the upper bodice.

Attach the skirts (I’d sewn the pocket bags on to each side seam before doing this. I just use my handy cardboard template which I made ages ago, I just trace around it directly onto the fabric and cut out.) 

Next the zip goes into the left side seam. I sew it here out of habit as I’m right-handed and find it easier to do up that way but put the zip in whichever side works for you. After neatening both side seams separately first I sewed up the top of the side seam by about 4cms from the armhole edge. I used an invisible zip and inserted it in the usual way, making sure the waist seams matched, and then joining the rest of the side seam once I was happy with the zip insertion. I sewed up the other side seam and I was ready to tackle the sleeves.

The sleeves are set-in so I made the elasticated cuffs on the flat first using straight strips of jersey the same length as the curved cuff edge. With the strip open and RS together I sewed it once. 

Then I folded the strip in half and sewed it on the overlocker to create a channel.

 This will turn downwards to form the cuff which I slotted wide elastic through, securing at both ends. 

Finally, I sewed the underarm seams to create the sleeves which are inserted into the dress as per the instructions. 

All that’s left to do is the hem which I sewed on the coverstitch machine which is on loan to me by Pfaff at the moment. 

I’m really pleased with how the dress has turned out, it’s very swishy and has a slightly 1940’s vibe to it. I like the extra length on the skirt and the sleeves look fab. I was a little alarmed when I saw the large scale of the print but actually I really rather like the bees now. One thing I’m not keen on (and this is down to the manufacturer and not the supplier) is that they have printed a black background design onto a white base cloth. Because the cloth has a pile it means that anywhere there are joins there is a slight hint of the white showing through which is not ideal. The velour isn’t too tricky to work with as the pile is a bit flatter than velvet but it does still ‘creep’ a bit in places so if you’re in any doubt that pins aren’t enough to keep it all in alignment make sure you tack (baste) seams together. If you have a walking foot I would definitely advise using it. 

Lots of pictures swishing about!

I hope this will help you to feel inspired and perhaps have a go at ‘hacking’ a pattern for yourself. This was a very simple one but if you look at my Simplicity blouse hack you can see just how carried away it’s possible to get!

Until next time, happy sewing

Sue

Your Sew Over 50 go-to tee-shirt patterns

We asked you another question on @SewOver50 in October-which were your favourite go-to, never-fail, T-N-T T-shirt (tee shirt?) patterns and naturally you came up with a veeeeerrrry long list. I’ve trawled through them all and simply listed them here with a link (if I found one) for each so you can check them out for yourselves. As blogs go, it’s a bit of a dull one but you might it useful and maybe find your next new favourite pattern amongst these. Needless to say there are probably another one or two hundred more patterns which you think ought to be on this list!

I’m not recommending or endorsing any of these patterns personally, they have all been suggested by you, the enthusiastic followers.

Melissa Breton Tee-Thrifty Stitcher -relaxed drop-shoulder tee with 3/4 sleeves and a bateau neckline

Plantain-Deer & Doefree pattern (if you sign up on the website) loose-fitting tee with a low scooped neckline and 3 sleeve options.

#1366 Cynthia Rowley Simplicity-loose fitting top

Mandy Boat Tee-Tessutifree pattern boat neck drop-shoulder Tee with 3/4 sleeves

Ola-Tessuti-tunic top

#3338 Kwik Sew-I can’t find this one, possibly discontinued?

Astoria-Seamwork-cropped length, fitted long-sleeve top

Classic Tee-Love Notions -close-fitting tee with 3 neck options and 3 sleeve lengths

Laundry Day tee-Love Notions-fitted tee with 3 necklines and 5 sleeves options

Basic Instinct shirt-Secondo Piano-classic simple tee

Freya Agnes Coco-TATB-Tilly has a range of jersey tops and dresses with a variety of necklines and sleeve options.

Moneta-Colette patterns-Moneta is a dress pattern in stretch fabric with a fitted bodice and a couple of sleeve options.

#2805-Jalie Patterns-t-shirt with 4 sleeve and 4 neckline options. It has a huge range of sizes

Statement Tee-Ottobre magazine 2017/2 various options so check the website

Wardrobe Builder Tee-Wardrobe by Me (not many instructions apparently) close fitting tee with 3 body lengths, 5 necklines and 6 sleeve-lengths!

Uvita-Itch to Stitch-dropped shoulder bateau-neck tee with 2 sleeve lengths

Pamela’s Perfect Tee-Pamela’s patterns-longer length fitted tee with several neckline and sleeve options

Green Tee-Greenstyle Creations-longer length fitted tee with scoop or V neck and lots of sizes

Lark-Grainline-a popular pattern with 4 neckline options and 4 sleeve lengths.

Stellan Tee-French Navy Nowfree pattern a boxy tee, not sure how many sizes.

The Astair tee-another boxy tee also from French Navy Now with sleeve variations and a patch pocket.

Renfrew-Sewaholic another classic tee with several sleeve lengths and various necklines

Kirsten Kimono Tee-Maria Denmark-close-fitting cap-sleeved tee

Carine Tee-Elbe Textilesfree pattern cropped tee

Lane Raglan-Hey June-scooped neck raglan tee and sweatshirt pattern

Jade-Made by Rae-scooped neck tee in a wide size range

Concord-Cashmerette-lots of options in curvier sizes

Molly Top-SOI City break eBook classic drop shoulder tee

Eva-Pattern Union-a simple close-fitting tee with long or short sleeves.

Geneva Tee-Named raglan tee with long sleeves

Ruska-Named-Breaking the Pattern-tee shirt/dress with various options

Ultimate T-shirt-Threadcount free gift pattern from a back issue of Love Sewing magazine

Panama-Alina Design-tee shirt with dress-length options

starting top left @debs_sewing_room @sarahguthrie_stitches @loves_knitting @heathersewist
left @spoolriversewing main centre @sewcialstudio right @sewingalacarte
left @sewcialstudio right @mrs_moog
bottom left @damselfly.ca @_mysewingdiary @rocketcitysewing and @seams_sew

Needless to say this is in no way an exhaustive list but they have all been used, and recommended, by you. There are some freebies which might be worth a try, as well as pricier options.

Until next time,

Happy sewing

Sue

My Simplicity pattern hack for The Eve Appeal.

How often do you alter or adapt a pattern when you’re making it? By that I don’t mean the usual things like adjusting the fit to suit your height or bust measurement, I mean really alter it significantly with things like changing the sleeves or completely changing the length. 

I’ve always enjoyed doing exactly this because it’s a way of making a garment completely original and all your own even if loads of other dressmakers are sewing and sharing their versions of a particular pattern. These days this process even has it’s own name-pattern hacking. You can read a couple of my previous blog posts where I’ve hacked patterns to give you some other ideas, here and here.

When I was invited by The Fold Line to take part in the Simplicity Patterns/Eve Appeal campaign this year I knew it would be something I’d enjoy and could really get my teeth into. There are a range of patterns you can choose from and for every one sold Simplicity will make a donation to the Eve Appeal. I picked a blouse pattern #8658 to use because I could see its potential for changes, not least because it’s shown in stripes on the envelope and I knew there was fun to be had playing with the directions of them. I chose a really lovely blue striped shirting with a little bit of stretch generously provided by Minerva and while I waited for it to arrive I did some sketching of ideas. The raglan sleeve is in two parts running down the top of the arm to the wrist so my first idea was to have the stripes running in different directions, which led on to having the lower, bell-shaped part of the sleeve cut on the bias. 

I thought the back needed to be a bit more interesting than just a centre back seam with a button and loop closure so I altered it to include buttons and buttonholes. The blouse is over-the-head anyway so I don’t need to be able to open the buttons to get it on. The neckline is finished with bias binding but why put it on the inside when you can make a feature of it on the outside? 

Strangely I never saw it as staying just a blouse, it was always going to become a dress but how to do that? I like long floaty skirts so I sketched out quite a few variations of gathered, pleated and flounced skirts, all with pockets in the seams somewhere. I had decided that the bodice should be higher at the front than the back which obviously would affect the skirt levels but I eventually left that decision until the bodice was made up and I could see it more clearly on the stand.

I thought I’d do some of my initial adaptations and make it up as a blouse first to check the fit. The back is easy to change because it already has a CB seam so I merely added 5cms to the edge to allow for a grown-on button-stand. The original stitching line will remain as the CB and that is where the buttons and buttonholes will get positioned. I traced all the pattern pieces I needed onto spot-and-cross paper although the envelope does include a large sheet of squared tissue paper for you to use to make your own changes if you don’t have spot-and-cross. [You could use cheap wide greaseproof paper if you have it, I used to use broadsheet newspaper taped together when I was a student but that’s getting harder to find!]

Having traced the two parts of the sleeve once I then retraced them again (I didn’t want to cut up the first ones, I may want the sleeve full-length at some point) just the top parts to a length a bit above my elbow, around bicep level, not forgetting to add seam allowance to the new lower edge. Next I pinned the FULL-LENGTH sleeve pieces together along the stitching lines vertically so that I could trace off a new single piece for the lower sleeve. As well as the regular straight grain I added a bias grainline too because I’d be using that with the stripes. You could add extra fullness to this part by cutting and spreading if you wish, it would make a very voluminous bell-shaped sleeve.

I cut a size ‘medium’ according to both my body measurements and by referring to the finished garment measurements printed on the pattern. Using some lovely printed poplin from Stitch and Knit, a new fabric and yarn shop near me, I made up the blouse. Part of my plan on the dress was to highlight the seaming with topstitching so I did this on the blouse too although I used a fun ‘circles’ stitch in a contrast colour which echoed the design on the fabric. I didn’t cut the lower sleeve on the bias though because it wouldn’t make any obvious difference to the look of the print. I tried out my idea of French binding on the outside of the neck edge and that looked good too. 

Overall I was very happy with the fit of the medium so I didn’t need to make any changes to sizing. This meant I could retrace the front and back bodices to my chosen length which was approximately Empire-line or a few centimetres below my under-bust line. To decide where this was first I pinned the front and back parts together at the side seam on the stitching line and then attached it all to the stand. You can then see more clearly where you might want to draw the horizontal style lines from front to back, especially if you want a sloping line. With these lines drawn on you can trace off the new, shorter parts and check them on the stand and on yourself too. This is important because I thought I’d made the line a little too high so I added some more length to the bottom, 5cms in all I think. 

This might all seem like a lot of tracing off and you could just indicate on the pieces where your various cutting lines are (or wing it!) then transfer your markings direct to the fabric. As I planned to rotate the back so that the stripes were horizontal I wanted accurate pattern pieces. 

The bodice parts cut on the various grains to utilise the stripes.

After cutting the bodice section in striped fabric I first reinforced the buttonstands with iron-on interfacing up to the fold line. Next I attached the appropriate sleeve parts and top stitched the seams, then joined the shoulder seams so that I could bind the neckline. I’d cut a long bias strip of fabric 5cms wide which I folded lengthwise wrong sides together and pressed to get a crisp edge. Next place the bias on the WRONG SIDE of the fabric with its folded edges to the cut neck edge, this is because you will flip the binding to the outside eventually where it will be visible. Once you have pinned the binding in place you will know exactly how long it needs to be so then you’ll need to neaten the ends by turning them RS together and stitching. Fold them back out and pin in place, it should be level with edges of the buttonstands. Stitch the binding in place using a 1cm seam allowance, trim and snip as required then flip it to the right side and topstitch in position around the neck. The photos of the blouse version should make this clearer.

Once you’re certain of the length stitch the end of the bias like so.
It’s clearer in this image that the RIGHT SIDE of the bias is first attached to the WRONG side of the fabric, and that the end is neatened to finish level with the fold.
It should look like this when it’s finished.

You can sew the buttonholes at this stage too if you like or leave them until the end. I’d bought the most gorgeous metal buttons from Duttons for Buttons in Harrogate, Yorkshire, the only problem was that the loop on the reverse of them isn’t central which is why the top button looks a bit off kilter, it had to be sewn like that so that the top band remained level.

I attached the lower bias-cut sleeve parts next, sewed up the side seams and elasticated the cuffs., as per the instructions (yes I did use them occasionally!)

I still couldn’t decide what to do with the skirt so I tried a couple of ideas out with fabric scraps to mock-up various looks. The shirting is quite fine so it gathers really nicely without a lot of bulk, if I’d used pleats I would have had the complicated task of working out the pattern pieces to fit accurately onto a curved and dipping lower bodice edge and that was a challenge too far-especially as the stripes would have had to match too!  

flat all the way around-too much stripe matching for this one!
gathers all the way around.
Smooth front with side gathers, which is what I finally settled on.

Eventually I settled on a bit of a technical cop-out by using two simple rectangles which gathered onto the lower edge of the bodice instead of making shaped skirt pieces, apart from the central areas where they would be flat. This meant that the hem followed the same line as the bodice, higher at the front than the back, but the side seams will pitch slightly forwards as a result. It isn’t the end of the world but rather that than make the dress too complicated for you to try copying for yourself. And of course I put pockets into the side seams, with the stripes running on the opposite grain. I have a cardboard template for the pockets which I made ages ago and I just draw around it directly onto the fabric as required. (Basically I drew around my hand onto card, plus a bit of extra space, plus a seam allowance and a straight edge on one side to sew to seams) 

I placed the pocket bags 10cms down from the top edge on each of the side seams.

One final twist I added at the end was to insert elastic around the hem to give it an unusual silhouette. I turned up the hem 5mm and pressed it in position then I pressed it up again by 2.5cms. I topstitched top and bottom leaving a small gap through which I inserted 2cm wide elastic about 1 metre long. The casing could double as the hem if I choose to take the elastic out in the future. 

Mr Y and I went to Kew Gardens on a beautiful day in September and I took the opportunity to pop into the ‘Ladies’ and change into my dress for a photoshoot with more interesting backdrops than my back garden!

I hope this has given you a few ideas that you could try for yourself, this pattern is an ideal blank canvas and it has a few suggestions included which you could try first of all. There are so many possibilities you could attempt, and some of the other bloggers involved may have used this pattern too so it will be interesting to compare their own takes on it. I wanted to mess about with stripe direction, this would also work if your fabric has a strong one-way design. You could highlight the seams using piping, ribbon or other trims, what about an exposed zip down the back? you could leave the seam on the top of the sleeves open and secure it at intervals with little buttons? Obviously you don’t have to turn it into a dress but you could play with the length or put straight horizontal seams across, maybe at different levels to each other? It could potentially be a scrap-buster too…so many possibilities! If you’re going to add style lines which aren’t already there don’t forget to add seam allowance to the edges of them, include a notch or two if necessary so that you know which pieces you’re matching together.

You might have tried and trusted patterns at home which would be ideal springboards to new ideas, or by buying this pattern you will be helping raise valuable funds for research and support of those suffering with female gynaecological cancers.

Whatever you decide to try, enjoy the exploring the possibilities, don’t use expensive fabric to start with if you’re not sure you’ll like the result, look in your workbox to see what trims and embellishments you could use, contrast top stitching is one of my favourite, and most simple, ways of making something unique. There’s a whole series of other bloggers who will be taking part in this challenge in the coming weeks and months so why not take a look at what winner of the Great British Sewing Bee 2018, and pattern-hacking queen, Juliet has done for starters, or Abi of @whatabimakes and Rachel @thefoldline have added their spin to patterns in the range now too.

You can find further information about the patterns used here too

Facebook: https://www.facebook.com/SimplicityMcCalls/

Instagram: https://www.instagram.com/simplicitymccallsuk/

Twitter: https://twitter.com/SimpMcCalls

and for more information about The Eve Appeal try here

Twitter: https://twitter.com/eveappeal

Facebook: https://www.facebook.com/eveappeal/

Instagram: https://www.instagram.com/eveappeal/

Think outside the box, what’s the worst that can happen? you’ll ‘waste’ a bit of fabric, or you could discover hidden designing talents, just have fun and do your bit for charity at the same time.

Happy Sewing!

Sue

Sidewinder pants by The Sewing Revival

The Sidewinder pants are my third make using a pattern from The Sewing Revival following on from several versions of their Heron dress and Bellbird top. I’ve already written reviews of them which you can read about here and here, plus I made a new version of the Bellbird at the recent Sewing Weekender in Cambridge, organised by The Fold Line.

The Sidewinders are a very simple pull-on trouser pattern with a tapered leg but their USP is the diagonal side seam which gives them such an interesting ‘twist’. They are flat-fronted with an elasticated back waist and of course there are pockets in the seams too. There are variations at the hem too as you can choose plain full-length, 7/8ths with turn-ups like mine or use wide elastic to gather the hem into cuffs. As you can see from the artwork they could be very casual or dressed up with heels, fabrics with a bit of body but some drape and softness are suggested. Like the other Sewing Revival patterns these are PDFs so you can buy, download and print your pattern any time, or have them printed for you on A0.

As I’ve come to expect with SR patterns the instructions and illustrations are very clear and personally I’ve always found their sizing very good too. I cut the large based on my measurements although I did decide to shorten the leg length very slightly as I didn’t want them ‘pooling’ around my ankles too much, the idea is that they sit above the ankle bone. The instructions tell you what length of elastic to cut for the back waist which you can then adjust to suit.

For the first pair I used some Royal blue crepe fabric which was leftover from the Trend Asymmetric dress I made last year. If you’re using a plain fabric these trousers are surprisingly economical to cut and if you’re short of fabric you could cut the pocket bags and waist band facings from other fabrics too. You could have fun with stripes or checks to give them a bit of a Vivienne Westwood vibe but you’d need more fabric for that. What about using ribbon or piping down the side seam for emphasis?

Construction is very quick, I’d say that this could be a half-day project if you aren’t getting fancy with pattern-matching. I really like the way that the waistband is a facing because when it folds over the top it secures the pocket bags in place, you only need to neaten the lower edges of them. The elastic gets slotted through the back channel which extends slightly around to the front beyond the ‘normal’ side seam position. Once this is stitched in place you sew down the facing at the front. This line of stitching isn’t near the edge, it’s approximately 3.5-4cms away depending on the width of your elastic so use a guide of some kind to keep it parallel, I always use the quilting guide which comes with my machine or you could use Washi tape or similar stuck onto the bed (I’m not keen on this personally as I wouldn’t any sticky residue near my fabrics but I know others use this method)

These are the second pair which I made at the Weekender and that is why some of the overlocking is different colours.

As I said earlier I’ve made both versions with a small turn-up so once I’ve turned them up I stitched through seam lines of the inner and outer leg seams to hold the turn-up securely in position.

You’ll notice from the grey version that I contrast top-stitched in pink either side of the outer leg seams to give some emphasis to the diagonal seam, I like how it goes ‘off’ at the hem.

The blue pair are sooo comfortable because the crepe fabric has quite a bit of natural give, and the back elastic gives a nice snug fit without being too tight. My blouse here is a longtime favourite, the Imogen from Sew Me Something
There was enough fabric to make a belt which ended up being massively long so it goes round twice into a big bow!
And these are the grey pair which I teamed with the second garment I started (but didn’t finish!) at the Weekender which is another Sewing Revival Bellbird made in a very lightweight woven check cotton which I picked up on a swap table somewhere last year. The label was given to us by lovely Harriet of Sew me Sunshine which is a really nice reminder of what I made and where!

Janine at The Sewing Revival generously provided me with the pattern for the Sidewinders and I’ve been more than happy to write a review because I love these trousers! I’m planning to make more for the winter and I’ll definitely give a gathered ankle pair a try too.

After a few weeks of sewing for others, writing (and then completely rewriting the Sew Over 50 birthday blog post because I lost ALL 4000+ words!!!!) and being away from home it’s lovely to get back to a bit of sewing for myself and sharing my thoughts with you. I’m so happy that I discovered The Sewing Revival as a result of our first Sew Over 50 challenge at the beginning of the year, did you find any new patterns brands as a result too, that was certainly our hope.

Until next time,

Happy Sewing

Sue

Testing the Regatta dress from Alice & Co

Alice & Co are a pattern company run by the mother-and-daughter team of designer, pattern cutter and sewing teacher Alice, and Lilia, who is a museum textile conservator for her ‘day job’. I saw they were requesting new testers for one of their latest patterns and, as I generally enjoy the process of testing and I’m happy to give my time to assist small indie companies when possible, I was pleased to be invited to help.

The Regatta is a summer dress featuring a neckline which pulls up with ribbon to tie on the shoulders, a gathered or pleated waist, patch pockets and a button-back closure.

I had some printed viscose fabric in my stash which my good friend Claire had given me a few months back and I was sure it would be ideal for this test version of Regatta. I think the dress will be great made in a wide variety of fabrics including chambray, cotton poplin, madras cotton check, seersucker or shirting, as well as eyelet or broderie anglaise, washed linen…I could go on!

This is a PDF pattern but unlike many which provide you with ALL the pattern pieces you might require, because of the simplicity of the skirt it only gives you pieces for front and back bodice plus a patch pocket. It needs a total of 8 pages printed in colour rather a selection of dotted/dashed lines. The skirt is merely three rectangles (front and two backs) so rather than waste paper it gives you guidelines to follow for cutting the skirt pieces ‘freehand’. This isn’t as daunting as it might sound, I used the full width of the fabric cut to my chosen length PLUS a hem and a top seam allowance and then the same again but cut into two equal pieces to form the backs.

The instruction booklet is written in a nice friendly chatty style which feels both informative and encouraging, I think the illustrations are well-drawn and clear too. I printed mine out in booklet format which is a good option if your printer will allow it, 3 pages printed on both sides which fold neatly into A5.

I opted to cut a size 16 according to my measurements from the chart but I would definitely come down at least a size for the next one. As the bodice needs to be lined anyway you could make up the lining as a toile to see if you need to make any adjustments and then use it in the dress. Depending on your fabric you could self-line it or, as I did, use a plain cotton. I also decided at this stage that I would line the skirt because my fabric is a bit sheer, plus it’s a floaty skirt so I don’t want any knicker-revealing moments on windy days!! [I made a simple A-line lining, not the full pleated skirt which would have been awfully bulky]

The bodice construction is simple [if you don’t like darts you won’t be a fan though, you’ll need to make 8!]

Follow the instructions carefully for the ribbon channel openings, the diagrams will help if you’re not sure. Take care inserting the ribbons pieces at the back-cut the ribbon into one long piece for the front and two shorter pieces for the backs. You could possibly use wide elastic for this element instead if you want a different look, or make a self-fabric strip or what about using a vintage scarf even?

Once you’ve joined the outer fabric and linings together along the neck edges and armholes you’ll also need to understitch here as much as possible, to give it a nice crisp edge and stop it rolling. Just go carefully so as not to catch the fabric accidentally-you won’t be able to sew everything because it will be inaccessible in places. 

Next, when you sew the actual channels that the ribbons sit in, it might be wise to tack in position first, certainly mark the lines in some way-chalk, pencil, erasable marker-or if you have a quilting guide attachment for your machine use that. It looks like a piece of bent metal which slots in behind the foot of your machine. You can see it better in the photo although this was a different project. This enables you to follow a stitching line which is considerably further away than your usual seam allowance markings on the needle plate will allow. You’ll need to be most careful sewing the back channels because the ribbon is already in position so don’t sew through it by accident, it won’t gather up. Slot the ribbon through the front when you’ve sewn the front channel, or leave it until you’re ready to try the dress on and adjust the bows to your taste at the end.

using the quilting guide attachment to follow a wider width [this was on the Heron dress]

Making up the skirt is simple enough, don’t forget to interface the button-stand areas for stability. The pockets are positioned over the side seams but they could go directly on the front if you prefer.

I opted to use pleats on the skirt because I prefer how they look on me to gathers. I don’t have any sage advice or foolproof mathematical equation for working this out I’m afraid, I just pinned the skirt to the bodice at the side seams, CF and CB button-stand and then fiddled until I was happy with the pleats before stitching it on. There were lots of pins involved!  

lots of pins holding the pleats in position ready to sew.

If you aren’t lining the skirt then you can simply slip stitch the lining in place by hand as per the instructions. As I was lining the skirt too I cut, sewed and hemmed a simple A-line shape in plain cotton which I stitched to the bottom of the bodice lining, obviously it must have the gap at the back for the button opening. I simply caught this down behind the button-stand with a few hand stitches so it doesn’t flap about. So that it doesn’t ride up inside the dress I hand-sewed a few stitches at the side seams and CF where the seams meet to anchor them together loosely.

The lining looks like this inside, it doesn’t need to be the full length of the skirt although it could be if you want.

I used a nice deep hem of 5cms to give the skirt weight. I overlocked the edge and then used the blindhem stitch and foot to sew it up. As the hem is straight you could face it instead with bias binding or ribbon, or a contrast fabric for a different look, either machine top stitch or slip-hem in place by hand. The photos show the blindhem for my machine but most machine manuals will show you how to sew this-definitely practice to get it right as there is a knack to it.

I used 4 buttons on the bodice section and then 6 buttons on the skirt, evenly spaced so that there’s still a nice ‘split’ at the bottom. I have a ‘thing’ about button opening on skirts where the bottom button is too close to the hem, don’t ask me why, I just don’t find it aesthetically pleasing. For a novel detail I used red and blue thread to sew on the bodice buttons and ivory on the skirt. I also added a small hook and eye at the waist seam to take any strain off the button at this point. 

All that remains is to pop your dress on and pull up the ribbons to your desired amount and tie in a bow, trim the ends into neat Vs to stop them fraying. Once you’ve adjusted the gathers to your liking then pin and stitch in a few places as per the instructions to hold them in place evenly.  

I used green Grosgrain ribbon as a contrast to the otherwise nautical colours of my Regatta dress.

I just need to find a nice wide belt to finish it off I think although it works perfectly well without. My Regatta dress has already had two wears since I finished it and it’s quirky details make it stand out. It isn’t an ultra-quick make compared to some styles but it’s worth the effort and makes a charming and feminine summer dress. It would even work in more ’special’ type fabrics too, like panne velvet, Chantilly lace or crepe de chine for an evening or party dress.

Once again it’s been an interesting process to help test a pattern and Alice & Co were quick to respond to queries. Another reason I was keen to assist is because as a brand they are very supportive of the Sew Over 50 cause by reposting images shared by older makers using their patterns, and have generously provided prizes in our previous challenges.

So while the sun is out here in the UK this could be a nice addition to your summer/holiday wardrobe.

Until next time,

Happy sewing

Sue

Pattern testing-a few thoughts on the subject.

If you’ve recently read my post looking at ways in which the Sew Over 50 community can keep ourselves in the public eye (should we wish to of course) you’ll know that I was talking, in part, about pattern testing for pattern designers. This seems to have generated a lot of comments and opinions so I thought I’d look at some of the issues here rather than a long trail of comments on the Instagram account (although you can always read them there too of course)

I deliberately chose not to address the biggest elephant in the room in the previous post because it would distract too much from the overall point of the post. That elephant is ‘why is it unpaid?’

Firstly, in the interests of balance, in a very few cases it isn’t always unpaid, because there is at least one pattern designer who gives a modest amount towards fabric and time for testing when the patterns are getting closer to being released. In my experience they have been pretty well tested in-house before they are sent out to testers for what they hope will be final checking, typos, errors, sizing and fit issues etc. I’m not willing to name this company because I’ve no wish to cast the ones who cannot, or do not, pay in a bad light by comparison, or give anyone the opportunity to start mud-slinging.

This leaves the companies who cannot, or do not, offer to pay for testing. I can only speak for my own experiences of testing here, you may have had other experiences yourself-positive or negative.

Let’s be quite clear, obviously nobody makes us do this and if you are unhappy or don’t agree with it being unpaid, don’t do it! Many indie pattern companies are quite literally one-woman-bands, often with other jobs the rest of the time, and to pay testers is impossible. At least they wish to have a testing process because if they didn’t we might find half-baked products released onto the market for which we’ve paid good money. I’m sure we’ve all used that type of pattern too, which has been rushed out with little or no quality or typo-checking and testing first, it’s infuriating. Yes, of course in an ideal world we would all be paid for doing this but the simple truth is that that isn’t possible in most cases. It’s a terrible business model to rely on unpaid labour but what is the solution? I agree that more of the larger indie companies should definitely be giving better ‘rewards’ because if they can finance fancy promotions and campaigns and websites and several staff then they can give some small remuneration-they wouldn’t expect a photographer or professional model to do it for nothing and they probably work for considerably fewer hours than it takes the maker at home to construct complex garments. Or maybe the ‘working for free’ culture goes further up the chain than we realise?

So, if you offer to do this and are asked to test, what next? The time it takes and the quantity of fabric needed will vary hugely and personally I prefer to know in advance what sort of garment it’s going to be, some designers give a clear descriptions of what it is so you can choose not to participate if you don’t like the sound of it, others play their cards close to their chests and don’t want to give too much away, which makes it a bit more difficult to decide. Again, the comments on IG vary from people finding it an enjoyable, interesting, at times challenging but rewarding (though not financially) experience. Usually the very least reward you can expect from the designer for your time and fabric is a copy of the finished pattern. Some offer discounts for future purchases (is that a ‘reward’?) it depends on their size and set-up to be honest.

One comment on IG spoke of her positive experience with testing for one designer who, whilst not paying, was very happy and appreciative of the results and shared the testers images upon the pattern’s release. Her experience with another pattern company however left a nasty taste because after release the designer only shared images of young, skinny testers thus ignoring this commenter’s time and contributions to the process, let alone her age or body type! If you want a very specific group of people to test for whatever reason then make sure that’s who your testers are. Don’t encourage anyone and everyone, allow them to help but then cut them out afterwards. I wish I knew who the company was so I can avoid them!

Obviously not all of us will have the time or resources to take on testing, the timescales are often tight (2-3 weeks max usually) so if it doesn’t work at the time then turn it down. It isn’t only the making that has to be done, you’ll need to give proper feedback which can take time. The flip side of the coin would be a small designer waiting on information from a tester only to be told, “nah, sorry, didn’t get it done”

I took exception however to one comment that because I, and others like me, were able to give my time, skills and fabric usually with no expectation of reward that I was somehow ‘privileged’. Couldn’t the same accusation then be applied to anyone who ever did anything for another person voluntarily? The person who pushes the book trolley around the hospital wards? The grandparent who goes into the classroom to listen to children read? Charity shops up and down the land would close if they didn’t have enough volunteers to help run them, the world would be an infinitely sadder place if we only ever did things for monetary reward. Yes of course it would be nice to be rewarded-I’d certainly like to get paid more of the time for my sewing, it is definitely undervalued although more often in my experience by the general public than by those who know what’s involved. I’m not putting anyone out of a paid job by helping test patterns, and if it was being paid then I would expect to be paid! If I am willing to offer my experience and skills to someone for little or nothing then that’s my choice.

Pattern designers do also take a chance with who they use to test. If they don’t have any kind of system whereby they can ask or check what skill level someone has then the results that come back may not be useable for them. If it’s a simple pattern then beginner skills might be perfect but I would hope they never dismiss experienced sewers just because it’s a simple pattern because they are more likely to spot errors or offer a better technique or method.

A growing area of change is that many designers are expanding the size ranges they offer so they will (or at least should!) be looking for sewers right across the range to help test the patterns. Is this something you’d consider doing, particularly if sizing has been an issue for you in the past?

@GroovyGreyLook asked if there were consistent standards for testing across the industry and I doubt very much if there is. Designers will set their own criteria which will be hugely variable depending on their own experience I’d say. The ones who have long-term and industry experience will know what they’re doing (although their instruction writing may not be great) whilst newcomers who’ve done a short pattern cutting course for example won’t have encountered so many potential pitfalls yet.

To sum up, yes of course pattern testing should attract some sort of financial reward but the fact remains that the vast majority of designers could never ever manage to do this, they are simply too small. Many of us choose to test because it’s an enjoyable and constructive way to use our skills for the benefit of someone else. It can be frustrating at times because the quality of pattern can be hugely variable and pattern designers will also have the right to pick whomsoever they like to do the testing and if they don’t choose a broad enough pool of people then that’s up to them, there is a vast resource of knowledgable people available.

I must stress that these thoughts are mine and are responses to the comments that have been left on the Instagram posts. I think the question of pattern testing will continue to go around and around but if the discussion leads more of those who are able to pay, even a small amount, to start to do so then that will have been positive. It’s no use getting shouty at people who are working quietly away in a small room doing something they love and hope to share, that’s not helping and it’s tantamount to bullying too. By all means leave your responses so that it can be a discussion but if I feel they are rude or shouty I reserve the right to ignore or delete them.

Until next time,

Sue

Simple Sew Zoe dress hack

I haven’t written a Simple Sew blog post for a few months but now that Sam Sterken has taken over with the organisation whilst Gabby is having her maternity leave we’re up and running again.

I had a bit of an idea in my head of what I’d like to do using the Zoe pattern which I already had so I chose some medium-weight enzyme washed linen in dark turquoise generously provided for us once again by Doughty’s Fabrics. I was really pleased with it when it arrived as it wasn’t too droopy but not over-firm either. Incidentally, it’s been terrible to photograph accurately, the final outdoor photos are definitely the closest to the real thing [to see how I altered the Zoe neckline so it wasn’t so wide have a look at my previous blog post in early 2018)

I drew a few sketches of ideas which all involved using the top half of the Zoe-initially I was going to extend the sleeves with wide pleated frills and keep the dress straight but I went off that idea as I felt the fabric was too firm for how I wanted it, I thought it would definitely work well with a peg-top skirt instead however. I wanted a shape that wasn’t too voluminous at the hem and by using an inverted A-line shape I could add pleats at the top but keep the hemline slimmer.

I went with option 4

I tried on one of my existing Zoes (I’ve made 3) so I could assess what length I wanted the top section, and took an arbitrary measurement of 34cms from the centre of the front neckline to where I wanted the waist, which is slightly higher than my natural waistline. As the Zoe has centre front and back seams I then measured from the top edge down to the point where I wanted the waist seam and drew a line at a right angle on the pattern across from that point. I took that line across to the side seam but at the point where the line met the side seam I made it a right angle, which creates a very slight curve on the line. Because the back neck sits a little higher than the front I matched the side seams to one another first and created a similar line across to meet the centre back seam. [It’s important that these lines are at a right angle where they meet at the side seams because otherwise you would have a slight V shape rather than a smooth line from front to back] 

I already have a skirt pattern that I’d drafted last year for a similar peg-top shape, I’d used it gathered though and I wanted pleats on the new dress. Initially I attempted to work out how to get 3 even sized pleats by folding and refolding the paper but I couldn’t quite get it. In the end I decided to cut the pieces in fabric as they were-with a slight modification for the front skirt as that piece was quite different-and then I’d work out the pleats once I was ready to attach the bodice and skirt together.

I cut all the bodice/sleeve/neck facings and assembled the bodice first. I’ve found that it’s easier to sew up the shoulders and attach the neck facings as described in the instructions but then attach the sleeves with the bodice open flat before sewing the side seams rather than in the round. The photos should help make this method quite clear. I added rows of contrast triple straight stitch to various seams as I went including around the neck [I used the quilting guide which came with my machine to do this accurately]

the sleeve is pinned on with the bodice opened out flat
the seam is pressed towards the sleeve
then the sleeve is pressed up towards the shoulder
the underarm seam is sewn up, overlocked together and then the sleeve is folded up again and top stitched into position.
On the outside I used the quilting guide on my machine to sew 4cms away from the finished edge of the neck.
top stitching on the neck edge.
the finished bodice

Next I cut the front and back skirts from the remaining fabric, plus I also cut two pairs of pockets for the side seams using the cardboard template I’ve made. [Just choose a pocket pattern that suits the size and shape that you mostly use to go in side seams and then make a cardboard version, mark the grainline and then all you need to do in future is place it on your fabric and draw around it with a pencil or chalk, it saves a paper piece getting scrappier and scrappier with constant use.]

card pocket template
the back and front skirt sections, the back is placed again the selvedge and the front extends all the way to the fold, I didn’t cut down the righthand side of the pattern as it looks here.

I made up the front and back skirt sections, adding the pockets to the side seams, then top stitched the CF seams as before, I didn’t top stitch the CB seam at this stage as I wanted to be able to sew in a continuous line with no breaks and I couldn’t achieve this until the hem was turned up too. Incidentally, as many of the seams were going to be pressed open inside the dress I overlocked the edges of most of them first then sewed the seam and pressed open. 

Next I pinned on the skirt starting by matching the centre front, back and side seams. Because I had no other markings now I played around with different positions for the pleats until I happy with how they looked. This will vary according to what size you’ve cut the waist but for mine I settled on 10cms each side of the CF seam for the first pleat and then the second and third pleats were a further 4 cms away from the previous one. I checked all the measurements to ensure that they were each symmetrical and well-balanced before I sewed it all together, overlocked to neaten and added another row of top stitching to the waist. 

Initially I tried to work out using my existing skirt pattern where the pleats would go but I couldn’t quite get my head around it so I chose to try it freehand in the fabric which, in the end, was a lot better.
the pins mark where I would match the pleats to the bottom of the bodice.
finished pleats!

This just left the hem length to check, I had opted for quite a long skirt length because I wanted the dress to be a fairly loose throw-on shape but not too baggy or undefined. I was happy with the length I’d plumped for so I used the triple straight stitch once again around the bottom and then down the CB seam, creating an angled line to define the facing which finished the slit opening. 

I’m not always super-happy with everything I make (and in truth I’ve positioned the pockets a little bit low in this dress) but I can’t wait to wear this dress during the summer! I’ve only ever worn my previous Zoes with long-sleeved tops layered underneath in chilly weather so it’s a bit of a revelation to realise that the sleeves are the perfect length for a summer dress. I think the skirt shape is more interesting than just a gathered dirndl and the lime-green contrast topstitching is a bit of fun. The linen is a great weight for this too, it will be crumply but that’s part of the charm of linen fabric…I think I may have to make more of this frock!

Until next time,

Happy sewing

Sue

Sew Over 50-has anything changed yet and what else can we do?

So, has anything changed yet in the use and portrayal of older sewers and makers in dressmaking in the media? I think the simple answer is still “no, it probably hasn’t much” but before we feel completely downhearted about it I think we should reflect on what has been happening and how we can continue to try and move things forward. Love Sewing magazine in the UK wrote an article about the situation and 10 of us featured in the photo-shoot that resulted…how about a follow-up article Love Sewing? Grainline have released a new pattern which features an older woman modelling it, are there any others doing this yet?

Since Judith Staley started the account in August 2018 it has gained over 12,000 followers and that number continues to climb steadily. I believe part of the reason for this is because people are discovering that it’s a very inclusive account where everyone in it is happy to share advice or tips, to encourage others, where the colour of our (slightly wrinkly) skin is not relevant, our physical abilities and the size of our waistlines likewise. We share our wide and varied takes on patterns both from the so-called Big 4 and Indie designers and, even though we continue to be frequently ignored by them, we will still mention which pattern it is and tag the company anyway. Generally we aren’t sore about it…There have been some successes with reposts by a few pattern companies on their Stories or feed which, if @SewOver50 is tagged, we’ll see. Make sure you always tag the account or use a recognised hashtag-they are all listed saved in Highlights on the account but by using #SewOver50 or #So50Visible for example Judith and Sandy will see you. If they repost your mention they will use the hashtag #So50thanks to acknowledge our appreciation to the pattern company involved. It’s a virtuous circle really, we buy the patterns, we sew the patterns, we share our make, the pattern company sees it and likes it, we buy more patterns! See? everybody is happy and so it goes on. We have the cash and we want to spend it on your product but if we don’t think you’re interested in us because we aren’t young/slim/pretty/etc etc insert as appropriate then we won’t buy your product any more because there are many other ways we can spend our hand-earned money instead.

Personally there are a couple of companies that I don’t bother to tag any longer because neither of them acknowledge or repost a make by anyone under the age of about 35, let alone mine. I mention the pattern and the brand so that others know which design it is but I don’t ’tag’ them. You might think this is petty but I find it very irritating that everyone these days says “tag us so we can see your makes” but then they don’t offer a ‘like’ or a brief comment to acknowledge or ‘reward’ you. I do realise that some accounts have tens of thousands of followers which makes it difficult but it can’t be impossible, and meanwhile we just continue doing free advertising for them. Somehow some companies seem to exist in a vacuum which is unsullied by their actual customers… How about a new hashtag? #NoLikeNoMention or #NoLikeNoTag?

Anyway, moving on…we’ve been asking recently on the SewOver50 account if you have experience of pattern reviewing, pattern testing or blogging about your makes? How was this for you? How did you get started, were you approached or did you volunteer to a call out of some kind? Any or all of these would be a really good way of continuing to have older faces in the mix.

Obviously I do all of the above because that’s why I write this!

So, looking at the first area ‘pattern reviews There are several ways you can get involved in this. Firstly decide on a pattern you think people would be interested in hearing about-you may base this on your experiences with it which might be great or they might be terrible! Either way, if you think you’ve got something to add to the conversation then get writing. There are two places which immediately spring to mind to do this and they are The Fold Line online community which is UK-based, and the Pattern Review which is in the US. BOTH are fully accessible from anywhere in the world so this doesn’t mean they are exclusive to those areas, you just might find more ‘voices’ from one or the other. They are VERY different from each other starting from the way they look, The Fold Line feels a little more ‘youth’ oriented and ‘modern’ in its look, I find it more visually appealing and easier to navigate whereas the Pattern Review I found a bit cluttered visually but I’m sure it’s whatever you are used to, I know it’s really popular and there’s a very broad range of people posting on the site which is great. Both have options to leave pattern reviews and share photos of your makes, I’d say that Pattern Review has a larger back catalogue of reviews by virtue of being around longer than The Fold Line. I like that PR has a series of questions available to guide your review which can be helpful and keep you focussed if you aren’t sure what to write, Fold Line is all in your own words. On both you can give an ‘out of 5’ star rating. We’re trying to encourage more of you to leave reviews and these are two places you can do that, it will keep our beautiful older faces in line of sight! Do you know of or use other sites? Let us know either in the comments here or on the IG account so that we can all share and participate. Judith has asked a few stalwart SO50 supporters for their experiences and impressions of using various pattern review sites so look out for those on Instagram this week too.

I was in The Fold Line weekly newsletter earlier in the year, this could be you too!

Personally, I write my own reviews here on the blog as well as The Fold Line although I include a lot more technical stuff than I’d put elsewhere. Most of my reviews are on patterns that I want to write about because I have something to say about them, and a few are because I’m part of a ‘blogger network’ such as Simple Sew patterns. I’ve always endeavoured to be a ‘critical friend’ when it comes to a pattern review and I don’t always give 100% glowing reports, if I encounter problems or errors I will point them out and I’ll try to give alternative methods or techniques if I can. I don’t find the kind of ‘review’ which just says “yes, this is pretty and I love it” very helpful. Preferences are obviously very individual but why do you love it? does it go together well? are the instructions clear? do you need to fiddle around to get a good fit? What sort of fabric works well? All these things matter and that is what many sewers want to know before committing to buying a potentially-expensive new pattern.

I also write reviews of fabrics which I’ve been provided with free of charge by various companies including Sew Me Sunshine and Minerva Crafts. I’m not embarrassed by this because I take a lot of time and effort to write comprehensive and helpful reviews of the product, a couple of metres of fabric is a very modest reward for many hours of work for me. At this point in time I’m not paid to write by anyone.

Love Sewing magazine here in the UK includes a reader every month who sew up their own version of that month’s free gift pattern and then they feature in a professional photo shoot. I was lucky enough to be invited to do this nearly two years ago and it was great fun, if a little nerve-wracking to start with. You may know of other magazines which do this so why not email and offer yourself to them?! Another way of featuring in magazines is to try tagging them if you share photos of your makes (best if you’re using their free gift pattern or another item which was originally in their mag as they’ll be more interested) you might get used on their ‘reader makes’ pages-it’s always fun to see your face in a magazine and sometimes there’s a ’Star Maker’ prize too. Most magazines and pattern companies have a Facebook page as well as Instagram which are easy ways to share your photos, Twitter is much less about images so I tend not to use that. Make sure your photo is of a decent quality though-clean the lens, or the mirror, check the background-are there pants drying on the radiator behind you? You don’t need to be David Bailey or have a fancy camera but if it’s not a clear picture of your make they won’t use it. Again, the SewOver50 account gave lots of tips for taking successful photos using your phone and they are saved in Highlights.

meddling with modelling!
in the now-defunct Sew Now magazine

Pattern testing is another area you can volunteer for and could be your opportunity to put your skills to good use. Keep an eye open for tester callouts on IG, or have a look at company websites for a sign-up list but bear in mind that you’ll almost certainly be doing this for purely altruistic reasons, almost no one pays or rewards testers in any way other than a free copy of the finished pattern after release. (This is a bit of a contentious area-should we be more adequately rewarded?- which I’m not going into here) You’ll probably provide your own fabric and donate your time and be helping small companies to improve their products. When I’ve done this in the past the better companies give you a set of questions which is helpful because you can direct your answers to specific areas they want to know about, plus add comments of your own. They should want to know things like ‘do the seams match’ or ‘are there notches missing’, ‘could the instructions be clearer or worded differently?’ I take pattern testing seriously and it can be frustrating and time-consuming when there are problems or errors, there are now rather a lot of inexperienced people releasing patterns which are ill-thought out and inaccurate. I’m more picky about volunteering now as I’m not keen on wasting my time, I get invited to help by some companies which is flattering. You’ll be more or less expected to ‘advertise’ the pattern when it gets released which is fine if you’re happy with what you’ve made, and the very small companies are usually very appreciative of this because they generally have little or no advertising budget so they rely on people like us making and sharing.

I was invited to test the Tilly and the Buttons Eden coat
Ana of Cocowawa invited me to test her Maple dress pattern

Finally, you could have a go at exactly what I’m doing now-blogging! I started to write here four years ago as a means to document what I was making more than anything and it’s diversified a bit because I also review exhibitions and books too, or places and events I’ve visited that have a sewing context. [The word ‘blogging’ or ‘blog’, if you didn’t know, comes from ‘web log’, a form of keeping an online diary.] I don’t have a massive following, or sponsors, like some but I know many people appreciate my plain speaking and honesty in my pattern reviews. Vlogging is a ’thing’ too but I’m not interested in that, I prefer to write and I’d bore myself (never mind you!) wittering on about my latest fabric haul or whatever. There are lots of places that ‘host’ blogs, I use WordPress for which I pay a modest monthly fee but there are many others, some free, some not. If you follow other bloggers, which providers do they use? Do some research to find the site that meets your needs, if you want more bells and whistles later on, can they be added? How much will it cost? You could just write a Word Doc and copy and paste it into a Facebook page. I have a Facebook page for Susan Young Sewing but I must confess I barely use it, I don’t find Fb as engaging as Instagram. Incidentally, The Fold Line has a useful Facebook forum which is where all the discussions take place, and you can sign up for their weekly newsletters which is a round up of all sorts of up-to-date sewing and dressmaking goings-on.

So, to sum up, there are a variety of ways we can continue to get our lovely faces featured so that we aren’t overlooked and the more of us that do it the harder it will be to ignore us! Judith will be sharing ideas and personal testimonies by other Sew Over 50 ‘activists’ during the coming days and weeks so keep a look out for them. If you’ve got a story you want to share with us make sure you use the @SewOver50 tag so that it gets seen [although with our growing numbers this is getting harder so DM if it’s really important] Let’s keep plugging away together, older women have wider choices and opportunities than ever before and it’s so much better if we can endeavour to support each other in reminding the wider world that we’re here and we aren’t going to go away quietly.

I hope we can continue to inspire, support and encourage one another using SewOver50 as our touchstone because we’re bloody brilliant!!

Until next time,

Happy sewing

Sue

The first SewOver50 challenge roundup and what’s next?

Well this is definitely late in arriving seeing as the challenge finished on March 15th…! After my flurry of activity for the launch of the first SewOver50 challenge in February, and a follow-up post with updated pattern companies, you might have wondered (probably not though…) where I disappeared to? The answer is simply that I had a holiday booked so off I went! Rude I know but Judith and Sandy were fully in command of the day to day running of the challenge so away I went. I missed seeing large chunks at the end of the challenge though as we were on a cruise where internet access is extortionately expensive and much as I love my sewing buddies I don’t love them THAT much, or another option is you can buy beer in bars when in port in order to receive ‘free’ WiFi (follow a crew member, they always know where a hotspot is)

So that’s my excuses out of the way, how did you get on? Did you enter? I was exempt from entering (obviously) but I did contribute a few makes of my own using patterns that qualified.

The Heron Dress by The Sewing Revival
The Holiday Shirt by The Maker’s Atelier, I’ve used this pattern 5 times now.
The Dawson Coatigan by The Thrifty Stitcher (what IS going on with my face? Don’t answer, it’s a rhetorical question!!

I think what the challenge brought home to many people is the lack of visibility of anyone aged over 40 frankly, never mind over 50. There were many comments over the six weeks, from much younger sewers as well as more mature people, saying how they simply hadn’t noticed but once you had noticed it became obvious. We have grown largely immune to it and just accept that the image in no way reflects a large majority of makers, even younger dressmakers must be sick of competing with these idealised versions of themselves too. [ yes we know that this doesn’t bother everybody and that’s fine but that doesn’t mean the rest of us are willing to accept the status quo]

Did you discover a new pattern brand as a result of the challenge? I’m sure there are many other brands who didn’t make themselves known to us either by email or commenting on the previous blog posts and I’m definitely not going to vouch for the quality or otherwise of some of those that did but personally I found lots of new ones which I’ll look out for more often in future. Many of them are PDF which means wherever you are in the world they are still accessible to anyone.

Via her posts Judith encouraged people to contact pattern companies who don’t currently use older models and she herself has received some enlightening answers. Of those companies which have so far responded to Judith, almost without exception they say that, unless they have a friend or family member who is willing to model for them, it’s very very difficult to find suitable older professional models registered with agencies, even if they would like to use them. There were a number of different reasons cited for not using older models and, as we’ve said before, a brand is absolutely entitled to create their own ‘look’ as they see fit. Many also said they already featured, or promised in future to feature, a wider cross-section of makers of all kinds in examples of their patterns, this seems the absolute least that a brand can do in exchange for constant free advertising when we ’share the hashtag’ or tag them in our posts. One brand claimed to feature a wide range of their customers makes but having looked through their feed I beg to differ, a modest range all under about 35 is how I saw it.

A lot of brands are very small operations so we appreciate the difficulties this brings but they were also very often the ones that were most keen to bring about changes. I guess being small means they can alter things about their product if it’s within their power to do so and they genuinely want to.

One brilliant example is Selkie Patterns who are a start-up company based in London creating their own print-to-order designs on lovely quality ethically-sourced fabrics. In January on Instagram they put up a post asking for anyone who would be willing to model their next pattern, I somewhat cheekily responded by saying “would you consider an over 50?” Imagine my shock and surprise when Alexandra contacted me and said “yes!” Gulp!

A month later I found myself posing in the sunshine in a backstreet near Waterloo in London, modelling the new fabric design and a sleeve ‘add-on’ for their London dress, top and skirt pattern. I had a blast and Alex made me feel so comfortable and at ease, and it was all loads of fun…we had cake too! I bet no one eats cake on Vogue shoots… It feels slightly surreal to keep seeing myself pop up unexpectedly in their advertising and on the website now…perhaps Kate Moss feels the same.. I was happy to do it because it was a chance to start the ball rolling [perhaps I should sign up with an agency ROFL]

So if one little company just starting out can do it I’m sure others could too, with a modest camera, an attractive backdrop and a willing volunteer it’s possible to get really nice results. Some might expect to pay or be paid which is absolutely fair enough, especially with larger companies who should have a budget for this, but not everybody can do this at the outset. You only have to look through the Sew Over 50 Instagram account to see just how many fabulous, attractive, amazing, funny, inquisitive people there are out there sewing original and inspirational clothes for themselves-dressing in the way WE want to suit our personalities and tastes. Yes, we might ‘just’ want great fitting jeans and a comfy cardie sometimes but that doesn’t mean we can’t make them for ourselves with fantastic details and using beautiful fabrics.

When the challenge closed Judith had been keeping a list of all the qualifying entrants and, with the help of her two gorgeous grandsons, they quite literally pulled the names of the winners out of her hat!

Our generous prize sponsors were:

The Maker’s Atelier
Paper Theory
The Sewing Revival
Naughty Bobbin Patterns
Alice & Co Patterns
Seamwork Magazine
Maven Patterns
The Thrifty Stitcher
Viola Isabelle 6
Ann Normandy
Designer Stitch
Fresh Press Patterns
Laura Sew Different

All the winners should have now been notified and have hopefully claimed their prizes, it will be lovely if they share what they make with the rest of us eventually, it could become a sewing virtuous circle!

So, what have we learned from this? Well there’s still a long way to go for sure but there seems to be a shift in perception in many areas of life that as we get older we shouldn’t be relegated to the backwaters of life, nor should we go there quietly and wait for a life belt to be thrown to us, if we want attitudes to change we have to change them ourselves by making our presence felt. It doesn’t have to be in a loud and crashing way because sometimes the softly-softly approach will work better initially, and if it doesn’t then we’ll just get louder. There is an element of ‘don’t ask, don’t get’ because by approaching pattern companies and magazines directly with polite enquiries and requests we’ve found them starting to sit up and take notice. Again it goes back to us being people who have disposable income to spend on quality products, which businesses with any sense will embrace as a lucrative market (so long as they don’t talk down to us or patronise, we aren’t all in care homes just yet!)

Since its creation just seven short months ago the account now has over 10,000 followers and continues to grow all the time. The Great British Sewing Bee returned for a fifth series and featured several wonderful sewers in their 40s, 50s and 60s, it’s a source of real inspiration and encouragement (isn’t it interesting that one of the judges is a feisty and stylish woman in her 60s? That wealth of knowledge and experience takes time to acquire) There’s another series on the cards and applications are open now so why not give it a try, here’s the link to get you started..

And let’s not forget that 10 of us did a photoshoot for Love Sewing which appeared in February with a fantastic 3 page spread in the magazine and a longer version in their online blog. Editor Amy is always on the look out for readers to review the free gift patterns in each issue so if you think you can write a decent review and would like to participate in a photo shoot yourself then drop her an email.

The fabulous 50s gals and editor Amy.

Personally I’m as inspired by younger makers as I am by people my own age and older, having the cross-section matters to me. I love to go to meet-ups and socialising with other makers because even though it can feel like speed dating for dressmakers I know we all have at least that one interest in common at the outset.

I’ll keep sharing SewOver50 updates here from time to time, I’m always in contact with Judith and some of our other partners in crime. We’ve got plans for the year and we’re are always open to suggestions for collaborations or sponsorships of our initiatives so if you think you’ve something to bring to the table feel free to get in touch with one of us. If there’s a brand you love who you think could do more then why not email them, offer yourself as a tester or a model for them, at worst they’ll ignore you and, if they don’t, who knows where it might lead? You could also leave a pattern review on The Fold Line website, or your preferred pattern review website, try and include nice clear photos where possible, they don’t have to be super-styled but it helps everyone more if you can see the garment clearly (rather than a big ol’ mess in the background) with a couple of views.

Right! I’d better get back to some sewing now, it feels like forever since I did any!

Until next time,

Sue

testing Eden by Tilly & the Buttons

It’s always nice to be asked isn’t it? Doesn’t especially matter what but anyway, it is. So when I was asked if I would help in the testing process of TATB’s new pattern for a jacket/coat to be released in the spring I was both flattered and happy to help.

I know I have a regular moan about some Indie pattern designers but TATB are one of those who I think do a very good job. The presentation (recently with refreshed new look packaging) and the quality of the drafting and the instructions is, in my opinion, of a very good standard. Tilly doesn’t usually chuck out loads of patterns one after another, they are often in pairs and spaced out through the year.

As is quite often the case with testing there was originally a fairly tight turnaround to return feedback so my first problem was to source the fabric, and quickly. I’m not a great one for buying fabric online unless I’m confident the description and other information is accurate, or I know exactly what it is. This time though I didn’t have time to explore my regular fabric shopping haunts in London and so I had to search t’internet to see what I could find. I’d hoped to get some kind of waterproof or waxed fabric but the ones I found were either very expensive, too boring, too childish (a lot of dinosaurs and unicorns!) or not suitable for the purpose. Next I looked at wool and wool-blends and many of these were also much too expensive as well but in the end I found a really nice felted wool from FabWorksOnline so I ordered that. I was very impressed with the speed it arrived too! It’s a fully lined jacket and I’d got some silky pale pink cloque in the old stash which I didn’t think I’d use for anything else, and I had a cream-coloured open-ended zip which I thought ‘that’ll do’ so I was good to go. One version of Eden is lined with jersey, you might want to consider putting a silky lining in the sleeves, although you could still put jersey just at the cuff ends if you want the contrast roll-up effect.

After a bit of a hold up the pattern arrived but when it did I hit the ground running. In all of Tilly’s other patterns I make myself a size 5 but after checking the finished measurements for the jacket I opted for a 4 this time.

I’m not going to give you a verbatim run through of the pattern here, this time I’ll highlight areas where I used specific techniques which I think work well for this kind of garment.

There are two style variations of the Eden, either a simple longer-length duffle coat style with toggles, or a shorter jacket with ’storm flaps’ and bellows pockets which is the one I opted for. We were asked not to make any drastic pattern hacks during testing but I chose to add 5cms to the overall length of the shorter style, it was shorter than I would wear it but the other was too long.

The next thing I did differently was to use the lining fabric on the underside of the flaps instead of the wool, to reduce the bulk of them when they go into the seams. If you’re using a thinner fabric this step isn’t so necessary but I knew that once all those thicknesses were layered up into the sleeve seams it would because very bulky.

this is the underside of the front ‘storm flap’ with lining instead of double wool.

The next thing I changed (and which hasn’t been altered on the final pattern) is the shaping at the cuff of the sleeve. This is because if you have a deep turn-back but the sleeve continues down straight ie. getting narrower all the way down, when you fold it back it doesn’t lie flat against the inside of the sleeve seam. Look at the photos below and you’ll see what I mean.

I’ve shaped the seam outwards, if you look at the next photo you’ll see why.
when you turn the cuff up inside the sleeve it will sit flush inside now.
I also opted to make the lining shorter to the line I’ve marked so that it wasn’t going to droop out of the end of the sleeve. I felt there should have been a notch to mark where the turn up point was. I made a 5cms turn up for mine.

My other suggestion for the cuff is to use a strip of iron-on interfacing to stop it from stretching, being baggy and to give it some body. This is a technique I’ve picked up after doing numerous sleeve-shortening alterations for people because this is what you will commonly find inside RTW coats and jackets to stabilise it.

Iron-on interfacing applied to the lower edge of the cuff so that it’s just over the folding point of the cuff.
it looks like this when it’s folded back.
After sewing up the sleeve seam I use my ‘clapper’ as a mini ironing board to press the seam open.
Then I turned the cuff back into position to give it a good steamy press. Use a pressing cloth so your fabric doesn’t go shiny. If you aren’t familiar with a clapper, as you can see it’s a wooden tool which can be used in a number of ways. It gets its name from when you whack the steam out of woollen fabrics during the tailoring process, so that it doesn’t remain damp.

I’ve also learned from doing alterations that a few hand stitches inside the cuffs, and also the lower coat hem facing will help hold them in position so that they don’t drop down and spoil the look of your finished jacket. It’s tricky to describe what sort of stitch this should be, it’s a kind of slip-stitch a bit like you might find on handmade curtain hems. The sleeves are raglan so they are easy to insert.

The instructions for putting the zip in are good and the photos are a help here too-there will be an online tutorial although at the time of writing this I’m not sure if it’s available yet. Putting the lining in isn’t actually that complex but it does take time and concentration, and a bit of brute force. Don’t make the opening in the sleeve lining too small because it will make it very difficult to pull everything through, especially if you have stiff or thick fabrics. The gap gets sewn up and is then down inside the sleeve eventually any way. If you’re in any doubt about accomplishing this part my suggestion would be to get the lining sewn by machine to the edges around the front (zip) and hem, pull the lining through and then slip hem the lining to the cuffs by hand.

I chickened out of putting snaps on my jacket even though they would look nice. I haven’t used them on anything else and I didn’t want to spoil my Eden so near the finish line! I opted instead for very large silver press studs which I sewed on by hand.

I finished my Eden in December and I’m really pleased to say that I have worn it loads over the winter months. I’m very happy with my size decision too because there is still plenty of room for jumpers to layer up underneath, I think the next size up would have been too big. I also think the grey and pink look really pretty together as well.

I hope you find the techniques I’ve mentioned helpful, although I don’t think they were carried through to the final pattern, TATB obviously felt that their own methods and descriptions were good enough and maybe I’ve over-complicated things but overall I’m happy with the finished garment. It’s categorised as for ‘improvers’ and I think this is a fair analysis, it would be too complex for a novice sewer although with online tutorials and determination anything is possible!

As you can see from my photos my colour palette is a little more ‘mature’ shall we say than the TATB samples but I think that also proves that it’s a nice casual style which will actually work in lots of fabric and colour combinations. I enjoy the process of testing although there are times when it’s frustrating, I assume I’ve been approached because of what my experience can bring to the party and that isn’t always borne out in the end but it can be rewarding and personally I always take a lot of time over it and try to use my skills and experience to help, advise and improve when possible. I probably won’t be asked again now so I hope you find this post helpful…

Until next time,

Sue