Closet Core Sienna Maker Jacket

I resisted sewing any Closet Core patterns (previously Closet Case) for a long time because I took exception to a facetious remark that company founder Heather-Lou made about pattern cutting in an interview I listened to a few years back on the now-defunct Stitchers Brew podcast.

Obviously this approach harms no one except me and eventually I stopped sulking and relented because they had produced some really nice-looking patterns in the intervening years (and drafted by a professional pattern cutter…)!

I bought the Sienna Maker jacket because I was attracted to the variety of options it had including different lengths, quirky sleeve pockets and a button-up back vent on the short version plus the elements were all largely ‘mix-and-match’. This is something that’s always been quite normal with paper patterns from the traditional Big 4 (they aren’t 4 any more but you know what I mean) Indie patterns seem to often have a tendency for fewer versions in a single pattern and then you’re left to put your own spin on them, or they create add-on packs when they notice what others have been doing for themselves.

Anyhoo, in the autumn of 2022 I was going on a sewing retreat hosted by Sew Me Something in Stratford upon Avon so, using some printed needlecord from Barry’s in Birmingham, I cut out the short version of the Sienna Maker as one of my projects to sew while I was there.

The Sienna Maker is intended to be slightly oversized so I based my size choice on my bust measurement (39”) and went with a US14. I’m more than happy with the fit and there’s room for a layer or two in cooler weather (it isn’t lined though so this does make it a little trickier to get sweaters down the sleeves)

I found the instructions and diagrams really thorough, it’s rated as an advanced garment and I would agree with this because you’re dealing with some unusual or more tricky techniques, plus the fabric will probably be stiffer or thicker than most dressmaking fabrics. A good degree of accuracy is needed to create a sharp collar and lapel for example but I thought the diagrams and instructions for this area in particular were very good. It’s helpful to be clear which is your right and left because the two longer coat styles don’t have symmetrical details on the fronts so if you’re in any doubt (especially if the fabric is the same on both sides) put sticky labels onto the pieces until they are sewn together.

There is a lot of encouragement to create the garment you want by including various suggestions for seam finishes for example. I used a mixture of bias binding (Hong Kong finish) and simple overlocking but you could use flat fell seams for some of them if you wish. I’ve had a look and the Closet Core website has loads of tutorials for different techniques and methods so you might find something helpful there if you’re a bit stuck.

I made my own bias binding for both jackets, and for the short version I topstitched and made buttonholes in a contrast bright pink. I bought some fabulous metal buttons from the amazing selection at Textile Garden you’ll be spoilt for choice! You could also use heavy duty poppers instead.

I’ve had so much use from this short version since I finished it last October, I just find it really comfortable to wear, the pockets are really handy and surprisingly the unusual print seems to go with everything.

Fast forward to April 2023 and I was heading to a different retreat with my Sew Over 50 photo shoot pals to a wonderful place we’ve found in Derbyshire.

When I bought the pattern I had always intended to make a longer version too, I just hadn’t found the right fabric. Eventually I settled on the 12oz organic sanded twill cotton from Merchant and Mills in the Stanley Tan shade after seeing it made up as a jacket by a friend. I decided (and I hope I don’t live to regret this…) not to prewash it, my rationale being that there was quite a lot of fabric so it could end up streaky from the washing machine. Also, because it’s a coat, it won’t get laundered very often anyway and I could get it professionally cleaned when necessary.

I opted to make the longest version with the belt and D-rings so there are no fastenings this time, it has a deep front overlap which personally I feel crosses over to the wrong side, I would normally cross right over left so it feels a bit alien. As before, the instructions are excellent, there are a couple of areas where you really need to concentrate like making the opening on the front for the belt to pass through. My top tip would be to make sure you have transferred all the pattern markings carefully before you do any sewing because the two fronts each have different features, I used lots of tailor’s tacks!

Inside finish of the belt carrier

In spite of the distractions of sewing with my friends I took each part of the process slowly to make sure I had everything in order and a really nice quality finish. Once again I made bias binding from a blouse I no longer wore but liked the fabric, it has a new life inside the coat where I can see and enjoy it for far longer than as an unloved blouse.

psst, wanna buy a gold watch…? by the way, the shirt is a Holiday Shirt by The Maker’s Atelier which I squeaked out of just 1 metre of fabric

The coat has an attached belt which slots through D-rings on a tab to fasten (which I already had due to a major cock-up when ordering trims for a ruck sack pattern, but that’s a story for another day…) There are some very thick layers in few places but my Pfaff handled them superbly, I used a chunky jeans needle throughout.

The suggested finish is to topstitch all the facings and collar but I decided against this and I spent a quiet evening herringbone stitching them all in place. If you are going to machine topstitch I strongly suggest tacking (basting) the stitching line so that you have an accurate line to follow on the right side, this should hopefully reduce the need to redo areas where you may have wobbled off course.

I hope I will get as much use from the new longer Sienna Maker as I’ve had already from the short version, it will be too warm on sunny days but for our unreliable weather I’m sure it will be great. I didn’t want a heavy full-length coat and so just-above-the-knee suits me fine. Incidentally, there’s a large interior breast pocket and I didn’t include the back hem split. The fabric is beautifully soft but weighty, it has a suede-like finish, pricey but superb quality.

Delighted as I am with my new coat I can’t help feeling that there’s more than a hint of four candles and Arkwright’s stores about it but no matter, in my head perhaps I should rename it the Ronnie! [one for my British readers there…]

I’ve got a couple more Closet Core patterns in the pipeline over the summer, I made a Mile End sweatshirt last autumn and I’ve also bought the Nicks dress which I’ve got fabric lined up for already plus I’ve just invested in the Kalle shirt so I must be impressed with the quality of the patterns!

Until next time, happy sewing!

Sue

Making Burda 6914

I’ve recently realised that Burda 6914 has become a bit of a favourite as I’ve just made it for the fourth time so I thought I’d write a quick review of it here. It has 3 variations; sleeveless cocoon dress with hem darts, cocoon dress with a hem band and short sleeves, and a sleeveless top. They all feature the double pleat at the neckline and a visible bias binding neck finish. There’s no zip, it just goes over your head.

I got my copy quite some time ago with Sew Magazine but it’s still available to buy . My first version was the dress with darts at the hem and I added the sleeves. I had some wintery fabric of unknown origin or fibres in a dogtooth check so I didn’t want the short sleeves. The sleeves have 2 external darts which is an interesting feature but I wanted them longer so I increased the pattern to below elbow length simply by continuing the seam lines down to the length I wanted (sorry, it was ages ago and I didn’t take a photo at the time) make sure that the 2 seams are the same length as each other, it will gradually increase the width the longer they get. I then created new darts on the outside to absorb the fullness I had added, 5 in total.

the finished external pleats

The dress goes together very quickly, make the pleats in the front, join the shoulders, add the binding watch the instructions here as you’re told to trim the neck edge before adding the binding. 

With a striking design like a dogtooth check the bias binding at the neck will add a nice touch.

I’ve added pockets (of course) which aren’t part of the pattern. The darts at the hem are quite diddy but they give the skirt a nice shape. It’s been one of my favourite winter dresses.

Following the success of this dress I made another a few months later in a striped poly crepe from somewhere or other.

I added pockets again but as a single layer that was stitched directly to the front. 

I cut the sleeves on the cross grain so that the stripes were diagonal.

I love how the binding looks on this one but it does make your eyes go funny!

I liked this dress but I didn’t like how it looked on me. The sleeves made my arms look chunky and somehow the length didn’t feel right either-odd, because I didn’t do anything different to the pink/black dress. I wore it once and then it languished in the wardrobe for ages. Eventually I unpicked the sleeve darts and re-hemmed them and I cut off some of the skirt to the bottom of the pockets. I thought about unpicking the pockets too but that might have left holes in the front plus it would be quite a bit more work.

I’m wearing the top with my Megan Nielsen Ash jeans.

Much happier with this! I made a split hem detail and the sleeves are so much better.

Version 3 was made with 1 metre of viscose fabric which had been donated by Stoff & Stil in the second Sewing Weekender goody bags. Because it was 150cms wide I managed to get a top with short straight sleeves to which I added a short frill.

I hemmed the frill using the rolled hem on my overlocker so that it lost barely any fabric. The neck has a button and loop closure.

The latest version is made in a lovely 100% organic cotton lawn which I bought on impulse at the Sewisfaction Big Summer Stitch Up in July. I’d earmarked it for yet another Camber but changed my mind.

I tried out the ‘fork’ pleating method on the sleeve hems this time. I made a long strip of fabric gleaned from the leftovers and neatened them first with a rolled hem finish again. It’s a really simple method and I don’t know why I haven’t used it before. I think some people use the fork to create the pleat first and which they pin in place before sewing but I did it directly in the machine, just needing to be very careful that the needle didn’t hit the fork!! In truth the strip I made wasn’t quite long enough and I ought to have added a bit more but I’d already hemmed it and couldn’t be bothered. It just meant I had to juggle the pleats a bit to get them relatively even, it really isn’t that noticeable (I hope) If you’re good at maths you might be able to work out the ratios for this….I’m not and I didn’t… 

I used two buttons in similar colours to the print, one on top of the other. I always make a hand-sewn loop, it’s usually the last thing and I find it quite a soothing, peaceful way to finish a make.

There’s an option for a double binding at the neck which I used this time. I think I like it but it doesn’t sit flat like the usual method.

It has a pretty hand-painted look to the design, the background colour is a little more Eau-de-Nil than it looks here. 

Knowing me this probably still isn’t the last of Burda 6914. One thing I keep forgetting is that there’s slightly too much ease in the sleeve head and I have to adjust the armhole so just watch out for this.

Have you got a favourite quick pattern that you go back to time and again? This isn’t a taxing make and there are times when I think I should push myself more with more complex makes but this is a satisfying garment to wear which is why I keep returning to it.

Until next time,

Happy Sewing

Sue