Two Minerva makes in one go!

I originally wrote this as a review for the MinervaDotCom blog but I’m not actually sure if it ever appeared. Rather than waste my efforts I thought I’d publish what I wrote here instead.

I’m sure it was a combination of an over-generous stated fabric requirement, my just-to-be-on-the-safe-side ordering and then super-stingy cutting out means that I managed to get not one but TWO sweatshirts out of my Minerva fabric choice this time. At the time of writing last autumn, Minerva were introducing a collection of textured jerseys made in a polyester/ viscose/ spandex mixture which came in a wide range of colours and textures so I opted for a geometric design in lilac to try out. I would suggest that this fabric is not as firm or thick as some jerseys suitable for sweatshirts, it isn’t fleecy on the reverse for example but it has reasonable drape, is soft to the touch and has a fair amount of stretch but not in a ‘really difficult to control’ kind-of way (it isn’t like lightweight jersey for T-shirts for example) it’s actually pretty stable so manipulates well into armholes or cuffs. 

I already had a pattern I wanted to try, the Maxine sweatshirt by Dhurata Davies that has interesting diagonal seams across the front which have pockets in them. This actually made cutting out a whole lot more tricky than I anticipated because the ‘check’ design of the fabric I had picked turned out not to be square but rectangular so matching the lines was a real challenge. In some areas I’ve failed so my advice would be “don’t choose a pattern that has too many intersecting seams or style lines” because you could end up tearing your hair out when you can’t get it to match! Once I’d committed though I decided to press ahead and settle for ‘almost but not quite’…not my usual route but there we are.

When it became apparent that by folding and cutting really carefully I’d have oodles of fabric left over I pulled out a very simple sweatshirt pattern Simplicity 8529 and cut that at the same time. You might recognise this pattern as the Toaster sweater by SewHouseSeven if you think it looks familiar. If you fold the selvedges in towards the centre so that you have two folds then it’s often possible to get more pieces out of less fabric, any sleeves, yokes or facings can be cut out of what remains.

I currently have a Pfaff Coverlock 3 on loan to me so I used it to sew up much of the two tops on it’s 4-thread overlocker setting but you can easily sew this fabric on a regular machine, just use a ballpoint or stretch needle and set your machine to a very elongated zigzag if you can (regular stitch length and a narrow width) or a ‘lightening’ stitch if your machine has it. Unlike some jerseys or sweatshirting you’ll definitely need to neaten the seams though because I found the fabric frayed and went fluffy at the cut edges quite badly as a result of the woven nature of the surface design. Use a zigzag stitch on the edges if you have limited options, or pinking shears. 

the cut edges fray like this a little bit.
the Pfaff Coverlock 3.0, it’s been a fantastic machine and the quality and versatility of its stitching has been superb.

The ‘Maxine’ is a great design which stands out in a crowded field of many other sweatshirts and the well-written instructions and diagrams are very clear and simple to follow. The tricky area could be the point at the centre where the seams intersect, I simply made this more complicated for myself by choosing the geometric design! And of course it has pockets! I’ve made another version of it since the lilac from a remnant of linen/wool which you can read about here.

Maxine sweater in linen/wool mix from Merchant and Mills
this is a slightly truer version of the colour

The Simplicity/Sew House Seven pattern has a very simple ‘grown-on’ collar and self bands on the cuffs and hem. I cut and made this one up in less than two hours and it shows off the textured surface of the fabric very well. 

Simplicity 8529 with cuffs and hem band finish, I like this top so I think I’ll make another next winter but do the longer straight version.
You’ll notice that neither top is long but I’m happier to be able to make two shorter but perfectly wearable tops rather than one longer one with fabric left over which wasn’t enough to use for anything else.

I would suggest that this fabric will make very comfortable loungewear like track pants, tees, sweatshirts, dresses and children’s wear. I don’t know what the other designs in the range are like but if you are pattern match averse then this particular one might not be for you! I thought at the time it would be interesting to see how well a fabric with a raised surface texture like this wears and now that several months have elapsed I’ve found that it catches quite often and has started to pill quite significantly which is disappointing given the price per metre.

My thanks to Minerva for providing me with the fabric to write about, this is a significantly different version of the blog post which may, or may not, have appeared on their website. I did try to find it but their search function doesn’t make it very easy to find specific posts.

Until next time,

Happy Sewing,

Sue

The first official Sew Over 50 meet-up

After a couple of months in the planning I can hardly believe that the first ‘official’ Sew Over 50 meet-up is over! This isn’t really a blog as such, it’s more of a photo album so that those who were there can look out for themselves and to prove that it did happen and a great time was had, new friendships were made, information and tips were shared, fabric was stroked and support and encouragement was offered. 

Judith and I were simply overwhelmed by the feeling that was in the room for those 3 hours. The Village Haberdashery in West Hampstead, London proved to be the perfect venue to hold the meet-up with it’s mix of light-filled studio space and retail opportunities! Whilst quite a few of us already knew one another, and had met in the past, there were many others for whom this was the very first time they had gone to such an event. The distances some people travelled was extraordinary too, south Wales, Cumbria, Cheshire and north west England, Scotland, East Anglia, the south coast and Cologne, Germany were just some of the places people had come from. This represented a really big deal for some because it took them a long way outside their personal comfort zone to go on a long train journey to London and meet lots of strangers who they only ‘knew’ through the medium of little Instagram squares. So far as we can tell all of them thought it had been worth the effort and anxiety because within minutes of arriving they were chatting with fellow sewers and crafters as though they had known each other for years. That’s what the Sew Over 50 community seeks to encourage, to nurture and expand each others skills and talents, we try to make it a positive and supportive place to share our makes whether they are completely successful, or a dismal failure! 

I would personally like to thank every single one of the companies and individuals who gave me prizes for the charity raffle in response to my requests, and several others who offered without me even asking. 

Have a browse through the photos (please ask permission and credit me if you would like to use them elsewhere though, thank you) these are just a few of the hundreds that my daughter Bryony took for us but without them I don’t think there would be much record of the event having taken place…hardly anyone else took photos because they were too busy chatting!

unpacking the cake!
starting to arrive
the chatter gets going
The Village Haberdashery before we filled it up!
Marcia and Ana in the queue to get in
Val and Gilly came a very long way and had never been to a meet-up before but they had a great time
one question which never got asked was “did you make that?” because, obviously, we DID! More likely was “which pattern is that?” or “where’s that fabric from?”
pattern designers Marilla Walker and Ana Cocowawa Crafts who both donated prizes
what’s in the bag?
It’s a handmade plaque made especially for me by Jayne Wright, who also donated two handmade ceramic hedgehog pin-cushions (Threadquarters is the name of my workroom in the garden) Thank you so much Jayne
Judith and Lisa Bobo Bun who had come all the way from Norwich
Sara telling Jo all about sway back adjustments
I love this one, setting up for a selfie!
when Insta-friends finally meet in real life
this made me smile, Judith and I mirroring each other…
Ex-Brownie leader waiting for quiet
Ceramicist extraordinaire Corrie with our Great Leader, naturally she’s wearing one of her own handmade brooches
Susan and Amanda Patterns and Plains who generously offered a prize without me even asking
sorry Marilla but this was the best photo without one of you having closed eyes!
the much-admired cake made by Mr Y, it was universally agreed that it was a delicious fruit cake! ( and now he won’t let me forget it!)
busy in the shop now too
I love how during the course of the afternoon people are in different shots talking to different people all the time.
None of these ladies knew each other before they arrived but they got on like a house on fire
having a really good natter
my raffle ticket-selling friends Sara and Di
Me and lovely Ruth, whose son kindly donated a fabulous designer Anglepoise lamp which was much-coveted in the raffle.
Sharon (with the shoulder bag) is the talent and the brains behind Maven Patterns and generously donated 3 patterns to the raffle
group shot-it was a bit like herding cats but I think we got virtually everyone in
gathering to draw the raffle
by the wonders of WhatsApp I’m telling Kate (who was in Stockholm) that she had won a prize
She had won some lovely Lamazi fabric
with my fellow Love Sewing magazine photo-shoot friends, minus Kate and Sarah who couldn’t be with us. Love Sewing donated a one year subscription
this is us with former editor Amy and we featured in the February 2019 of Love Sewing magazine
designer Lucy of Trend Patterns donated two, here’s Charlotte with her prize
Corrie was thrilled with her Anglepoise, she’d been coveting it right from the beginning!
Sue was over the moon to win a Pfaff Passport 3.0
Judith trying out my teleportation device fashioned from an old hairdryer and sticky-back plastic. It didn’t work so it’s back to the drawing board for me!

I had opted to raise funds for The Samaritans, a UK-based charity who offer support at the end of the telephone to those at risk of suicide and the raffle made over £550 which is magnificent.

Thank you so much to everyone who came along and made it so enjoyable, thanks especially to Judith for having the courage to start the account in the first place. We’re approaching 18K followers and there have been almost 52K uses of the hashtag #sewover50 That’s a LOT of work which Judith and Sandy put in every day to ensure it’s such an enjoyable, interactive and mutually supportive community. I for one hope it continues this way. I’m sorry to those of you who couldn’t get a ticket, or are simply too far away, we want to actively encourage you to create your own meet-ups like this, there was no sewing at this one but you just need a venue where you can chat, a friendly cafe? your local sewing shop? Now we’ve started the ball rolling don’t forget to use the hashtag #so50meetup so we know what you’re up to.

Now, back to some sewing for a while!

until next time,

happy sewing

Sue

New Minerva blog post-it’s a Charlie Bomber jacket by Jalie Patterns

My latest Minerva blog post is up for you to read now and it’s a jacket that nearly didn’t make it. I chose the fabric based on the image on screen but when it arrived both the background colour wasn’t what I expected and the design was larger than I thought it would be too. The lesson to learn from this is to order a swatch whenever possible to make sure the fabric is exactly as you expect or want.

That said, the quality of the loop-back jersey I used was absolutely lovely and it made up-eventually-into a really nice Jalie Charlie bomber jacket. I haven’t used Jalie before but I must say I was very impressed with the HUGE size range each pattern comes in, the quality of the instructions and illustrations (in both English and French) and the sizing is spot on.

The next problem I had was matching ribbing to the multi-coloured fabric and also finding a suitable open-ended zip. Eventually I found a gorgeous raspberry pink plain jersey from Sewisfaction instead of ribbing, and I got a zip from MacCulloch & Wallis in London.

Trying to out-pink Zandra Rhodes!!

Anyway, once I got everything together it all sewed up really well and I was pleased with how all the colours eventually came to form a unified whole. Subtle it isn’t so it definitely needs to be worn with plain garments but it’s a bit of fun and I know I’ll use the pattern again too.

As always, you can find the full rundown of my making experience over on the Minerva blog now, I hope you find it useful.

Until next time, happy sewing

Sue

My Simplicity pattern hack for The Eve Appeal.

How often do you alter or adapt a pattern when you’re making it? By that I don’t mean the usual things like adjusting the fit to suit your height or bust measurement, I mean really alter it significantly with things like changing the sleeves or completely changing the length. 

I’ve always enjoyed doing exactly this because it’s a way of making a garment completely original and all your own even if loads of other dressmakers are sewing and sharing their versions of a particular pattern. These days this process even has it’s own name-pattern hacking. You can read a couple of my previous blog posts where I’ve hacked patterns to give you some other ideas, here and here.

When I was invited by The Fold Line to take part in the Simplicity Patterns/Eve Appeal campaign this year I knew it would be something I’d enjoy and could really get my teeth into. There are a range of patterns you can choose from and for every one sold Simplicity will make a donation to the Eve Appeal. I picked a blouse pattern #8658 to use because I could see its potential for changes, not least because it’s shown in stripes on the envelope and I knew there was fun to be had playing with the directions of them. I chose a really lovely blue striped shirting with a little bit of stretch generously provided by Minerva and while I waited for it to arrive I did some sketching of ideas. The raglan sleeve is in two parts running down the top of the arm to the wrist so my first idea was to have the stripes running in different directions, which led on to having the lower, bell-shaped part of the sleeve cut on the bias. 

I thought the back needed to be a bit more interesting than just a centre back seam with a button and loop closure so I altered it to include buttons and buttonholes. The blouse is over-the-head anyway so I don’t need to be able to open the buttons to get it on. The neckline is finished with bias binding but why put it on the inside when you can make a feature of it on the outside? 

Strangely I never saw it as staying just a blouse, it was always going to become a dress but how to do that? I like long floaty skirts so I sketched out quite a few variations of gathered, pleated and flounced skirts, all with pockets in the seams somewhere. I had decided that the bodice should be higher at the front than the back which obviously would affect the skirt levels but I eventually left that decision until the bodice was made up and I could see it more clearly on the stand.

I thought I’d do some of my initial adaptations and make it up as a blouse first to check the fit. The back is easy to change because it already has a CB seam so I merely added 5cms to the edge to allow for a grown-on button-stand. The original stitching line will remain as the CB and that is where the buttons and buttonholes will get positioned. I traced all the pattern pieces I needed onto spot-and-cross paper although the envelope does include a large sheet of squared tissue paper for you to use to make your own changes if you don’t have spot-and-cross. [You could use cheap wide greaseproof paper if you have it, I used to use broadsheet newspaper taped together when I was a student but that’s getting harder to find!]

Having traced the two parts of the sleeve once I then retraced them again (I didn’t want to cut up the first ones, I may want the sleeve full-length at some point) just the top parts to a length a bit above my elbow, around bicep level, not forgetting to add seam allowance to the new lower edge. Next I pinned the FULL-LENGTH sleeve pieces together along the stitching lines vertically so that I could trace off a new single piece for the lower sleeve. As well as the regular straight grain I added a bias grainline too because I’d be using that with the stripes. You could add extra fullness to this part by cutting and spreading if you wish, it would make a very voluminous bell-shaped sleeve.

I cut a size ‘medium’ according to both my body measurements and by referring to the finished garment measurements printed on the pattern. Using some lovely printed poplin from Stitch and Knit, a new fabric and yarn shop near me, I made up the blouse. Part of my plan on the dress was to highlight the seaming with topstitching so I did this on the blouse too although I used a fun ‘circles’ stitch in a contrast colour which echoed the design on the fabric. I didn’t cut the lower sleeve on the bias though because it wouldn’t make any obvious difference to the look of the print. I tried out my idea of French binding on the outside of the neck edge and that looked good too. 

Overall I was very happy with the fit of the medium so I didn’t need to make any changes to sizing. This meant I could retrace the front and back bodices to my chosen length which was approximately Empire-line or a few centimetres below my under-bust line. To decide where this was first I pinned the front and back parts together at the side seam on the stitching line and then attached it all to the stand. You can then see more clearly where you might want to draw the horizontal style lines from front to back, especially if you want a sloping line. With these lines drawn on you can trace off the new, shorter parts and check them on the stand and on yourself too. This is important because I thought I’d made the line a little too high so I added some more length to the bottom, 5cms in all I think. 

This might all seem like a lot of tracing off and you could just indicate on the pieces where your various cutting lines are (or wing it!) then transfer your markings direct to the fabric. As I planned to rotate the back so that the stripes were horizontal I wanted accurate pattern pieces. 

The bodice parts cut on the various grains to utilise the stripes.

After cutting the bodice section in striped fabric I first reinforced the buttonstands with iron-on interfacing up to the fold line. Next I attached the appropriate sleeve parts and top stitched the seams, then joined the shoulder seams so that I could bind the neckline. I’d cut a long bias strip of fabric 5cms wide which I folded lengthwise wrong sides together and pressed to get a crisp edge. Next place the bias on the WRONG SIDE of the fabric with its folded edges to the cut neck edge, this is because you will flip the binding to the outside eventually where it will be visible. Once you have pinned the binding in place you will know exactly how long it needs to be so then you’ll need to neaten the ends by turning them RS together and stitching. Fold them back out and pin in place, it should be level with edges of the buttonstands. Stitch the binding in place using a 1cm seam allowance, trim and snip as required then flip it to the right side and topstitch in position around the neck. The photos of the blouse version should make this clearer.

Once you’re certain of the length stitch the end of the bias like so.
It’s clearer in this image that the RIGHT SIDE of the bias is first attached to the WRONG side of the fabric, and that the end is neatened to finish level with the fold.
It should look like this when it’s finished.

You can sew the buttonholes at this stage too if you like or leave them until the end. I’d bought the most gorgeous metal buttons from Duttons for Buttons in Harrogate, Yorkshire, the only problem was that the loop on the reverse of them isn’t central which is why the top button looks a bit off kilter, it had to be sewn like that so that the top band remained level.

I attached the lower bias-cut sleeve parts next, sewed up the side seams and elasticated the cuffs., as per the instructions (yes I did use them occasionally!)

I still couldn’t decide what to do with the skirt so I tried a couple of ideas out with fabric scraps to mock-up various looks. The shirting is quite fine so it gathers really nicely without a lot of bulk, if I’d used pleats I would have had the complicated task of working out the pattern pieces to fit accurately onto a curved and dipping lower bodice edge and that was a challenge too far-especially as the stripes would have had to match too!  

flat all the way around-too much stripe matching for this one!
gathers all the way around.
Smooth front with side gathers, which is what I finally settled on.

Eventually I settled on a bit of a technical cop-out by using two simple rectangles which gathered onto the lower edge of the bodice instead of making shaped skirt pieces, apart from the central areas where they would be flat. This meant that the hem followed the same line as the bodice, higher at the front than the back, but the side seams will pitch slightly forwards as a result. It isn’t the end of the world but rather that than make the dress too complicated for you to try copying for yourself. And of course I put pockets into the side seams, with the stripes running on the opposite grain. I have a cardboard template for the pockets which I made ages ago and I just draw around it directly onto the fabric as required. (Basically I drew around my hand onto card, plus a bit of extra space, plus a seam allowance and a straight edge on one side to sew to seams) 

I placed the pocket bags 10cms down from the top edge on each of the side seams.

One final twist I added at the end was to insert elastic around the hem to give it an unusual silhouette. I turned up the hem 5mm and pressed it in position then I pressed it up again by 2.5cms. I topstitched top and bottom leaving a small gap through which I inserted 2cm wide elastic about 1 metre long. The casing could double as the hem if I choose to take the elastic out in the future. 

Mr Y and I went to Kew Gardens on a beautiful day in September and I took the opportunity to pop into the ‘Ladies’ and change into my dress for a photoshoot with more interesting backdrops than my back garden!

I hope this has given you a few ideas that you could try for yourself, this pattern is an ideal blank canvas and it has a few suggestions included which you could try first of all. There are so many possibilities you could attempt, and some of the other bloggers involved may have used this pattern too so it will be interesting to compare their own takes on it. I wanted to mess about with stripe direction, this would also work if your fabric has a strong one-way design. You could highlight the seams using piping, ribbon or other trims, what about an exposed zip down the back? you could leave the seam on the top of the sleeves open and secure it at intervals with little buttons? Obviously you don’t have to turn it into a dress but you could play with the length or put straight horizontal seams across, maybe at different levels to each other? It could potentially be a scrap-buster too…so many possibilities! If you’re going to add style lines which aren’t already there don’t forget to add seam allowance to the edges of them, include a notch or two if necessary so that you know which pieces you’re matching together.

You might have tried and trusted patterns at home which would be ideal springboards to new ideas, or by buying this pattern you will be helping raise valuable funds for research and support of those suffering with female gynaecological cancers.

Whatever you decide to try, enjoy the exploring the possibilities, don’t use expensive fabric to start with if you’re not sure you’ll like the result, look in your workbox to see what trims and embellishments you could use, contrast top stitching is one of my favourite, and most simple, ways of making something unique. There’s a whole series of other bloggers who will be taking part in this challenge in the coming weeks and months so why not take a look at what winner of the Great British Sewing Bee 2018, and pattern-hacking queen, Juliet has done for starters, or Abi of @whatabimakes and Rachel @thefoldline have added their spin to patterns in the range now too.

You can find further information about the patterns used here too

Facebook: https://www.facebook.com/SimplicityMcCalls/

Instagram: https://www.instagram.com/simplicitymccallsuk/

Twitter: https://twitter.com/SimpMcCalls

and for more information about The Eve Appeal try here

Twitter: https://twitter.com/eveappeal

Facebook: https://www.facebook.com/eveappeal/

Instagram: https://www.instagram.com/eveappeal/

Think outside the box, what’s the worst that can happen? you’ll ‘waste’ a bit of fabric, or you could discover hidden designing talents, just have fun and do your bit for charity at the same time.

Happy Sewing!

Sue