Jennifer Lauren is a designer who is based in New Zealand and her patterns come in both paper and PDF format. She has several womenswear designs including dresses, tops, skirts and a cardigan, and there’s a man’s cardigan too and, just for a change, her newest pattern release is Nixie knickers! Her aesthetic is both modern and vintage, and lines are simple and unfussy with the occasional quirky detail which is what attracted me to her designs in the first place.
The Mayberry is a dress with a drawstring waist and an asymmetric button front, and 3 different sleeve lengths. It also comes with the choice of 4 cup sizes (A to D) alongside the actual bust measurement which means you should be able to get an excellent fit without having to do an FBA or SBA.
I was chosen as a reviewer for the dress and obviously I would be making the PDF version, so initially I was aghast when I thought there were 100 pages to print out! On closer reading it was clear that you only print the bodice front in the cup-size that you need, not all of them, phew! Also, you don’t have to print all the sleeves, only the ones you want. To help you decide which sets of pages you need to print there is a single page with all the plans for each section illustrated which is really helpful.
If you need help with deciding which size and cup you need to choose there’s a very comprehensive set of instructions, with illustrations, which should set you right. There are also several lay plans for the different sizes on different fabric widths so you shouldn’t have a problem cutting out.
As with previous PDFs I don’t print out the instructions, I read them as I go along. Jennifer suggests that you print out and stick together each of the sections, and then trace them off and cut the traced sheets out. I can’t be doing with all of that, I just want to get going but obviously the choice is personal so you might prefer to do the tracing/cutting out method.
Once I’d got everything good-to-go I could cut out my fabric. I used a gorgeous plain aubergine-coloured fabric I’d bought about two years ago from the Man outside Sainsbury’s at Walthamstow market, I’m not sure what it is though, possibly challis. Either way it has a nice drape so would be ideal for the Mayberry. Other suitable fabrics would be chambray or soft denim, soft woollens or cotton lawn, Jennifer lists a few choices and also reminds you to wash your fabric before using it.
It’s really important to bear in mind when you’re cutting out the bodice fronts and facings that because they are asymmetric you mustn’t flip the pieces over if you’re using a patterned fabric because they could be all wrong if you do. You should be OK with a plain fabric just so long as it’s the same on both sides-not needlecord for example. a note on that-if you’re making the Mayberry in a thicker fabric for winter then you could cut the facings in a lighter contrast fabric for a neat touch and to reduce the bulk at the edges.
It’s an idea to highlight important information as a reminder to yourself. You may notice in the right-hand photo that my cutting out looks a bit inaccurate, this because the fabric is a bit slithery and moved about a bit so I had to check some of the smaller pieces carefully. I’m always very fastidious about cutting out because if it’s wrong before you start sewing pieces together it will only get only more wrong as you go, especially if you tend to be a bit sloppy with seam allowances too! You have been warned!
Jennifer’s order of making has you putting the bodice together and completing the buttons and buttonholes at this early stage. This is good a good idea although it’s one that I didn’t follow!! That’s because I hoped to use some snap fasteners instead of buttons but I hadn’t got (and never did manage to get) any in the colour that I wanted. Eventually I used buttons so making the holes was less accurate than if I’d done them without sleeves and skirt attached, never mind.
One of the details I like about the Mayberry is the drawstring waist. I was really chuffed to find some cord in exactly the right colour in Anglian Fashion Fabrics in Norwich on my recent visit, along with some cute little metal stoppers (if only they’d had the snaps in the same colour too)
Delightfully, there are pockets in the side seams which is always good news! Joining the skirt to the bodice is pretty straightforward and I thought the instructions for sewing the casing were good. You sew a wide 2.5cms seam allowance first of all then you trim one side down and press under and stitch the remaining side down to form the casing.
The sleeves are nicely full without being overblown and they have a pretty, narrow band to finish them off. The instructions for making the sleeves and inserting them into the arm-scyes are very detailed, along with helpful illustrations.
I decided to finish the hem off by hand because I didn’t want a row of machine stitching showing but you can also machine it up if you choose.
I think the Mayberry is a nice variation of the shirt-waister and I’ve made my version as a simple, elegant winter dress but I’ll definitely make more in other fabrics and with another sleeve length. You could make it in nice check brushed cotton for example, how about cutting the left front panel on the bias for a quirky feature? I appreciate Jennifer Lauren giving me the pattern for nothing in order to review it and luckily I’ve been very happy with the outcome. I made the 14 with a C cup and the fit is very good for me. If you’re a bigger cup size than a D then you’ll still need to do an FBA but at least you’ll be starting from a better position.
This would be a good style to try if you’re an ‘improver’ and keen to try something a little more tricky. You need to concentrate when you’re cutting out, and making up too because of the asymmetric front but it’s a satisfying make.
Why not give it a try…