a new Lamazi blog, sewing menswear!

It’s a new year (apparently?) so it’s time for my next Lamazi blog and I’m sewing something for Mr Y! I don’t know about you but I’ve felt I needed to work on something a little different to most of my other recent makes, I’ve made myself some lovely garments that I’m now frustrated not to be able to wear much as I want but Tony has been in need of some new clothes for a while now so it’s his turn to be on the receiving end! 

I don’t know what you think but I’ve found that men’s wear patterns and suitable fabrics are definitely a bit harder to come by than women’s or children’s, they are out there if you’re prepared to look but it’s not easy. I’ve made him some nice shirts in the past which you can read about here, and I had made him a couple of Thread Theory Finlayson sweatshirts recently and then my good friend Claire told me about their Carmanah top which was quite a new pattern. It has several options so you can individualise it, for example with full length or quarter zip, hood or collar, and with or without kangaroo pockets. 

Lamazi offers a range of co-ordinating See You at Six fabrics with plain and patterned French terry, and ribbing, all dyed to be a perfect match so we chose the ‘Clouds’ design in Bistro Green. 

I’ve never purchased ribbing fabric before so I was unsure how much to buy, initially I requested far too much because the pattern instructions made no sense to me. Liana at Lamazi and fellow-blogger Sharlene advised me so I had 1metre in the end to be on the safe side and that was sufficient for an adult garment. If you find yourself in a similar situation I suggest you measure the appropriate pattern pieces to get an idea, or try contacting the fabric seller and I’m sure they would be happy to advise. For an adult garment it almost certainly needs joins whilst something for a child probably wouldn’t.

Based on T’s measurements (he’s 6’3” and, although he’s lost about 28lbs during lockdown, he’s not skinny) I cut him a size large but I added about 2cms at the CF and CB folds at the bottom because the previous version was just a little snug at that point. He likes the body length which comes down to about hip level, and the sleeves are nice and long too so I didn’t need to add any length to them. 

The making up instructions and diagrams are quite clear, I got into a bit of a pickle using the twill tape neatening method though, partly because I printed off the booklet a bit small so I couldn’t easily read the instructions(!) and partly because the green twill tape I had managed to buy was wider than required! Anyway, I persevered and it looks OK in the end. This tape method wasn’t essential and overlocking is perfectly satisfactory, I just thought I would try it for a nice finish on the inside, it definitely adds more complexity if you want to up-skill though. The collar version has a nice detail of the chin guard over the zip which is worth adding for a quality finish.

I put the twill tape on the wrong piece of collar initially! This is the outer collar and the tape should have been sewn to the inner collar. Incidentally, I added iron-on interfacing to the top collar to give it a little more body. It doesn’t call for it in the instructions but I felt the first version could have done with a bit more structure. Have a look at the photo below to see what I mean.
This first version was made with cable knit bought from 1st for Fabrics I think the collar is collapsing a bit although it’s not really a problem
I added twill tape to neaten the front edges before inserting the zip
I tacked the zip into the opening before topstitching in place.
second attempt at the tape trim! the tacking you can see is holding the fold at the top of the collar in the correct place until I’m ready to top stitch it later on.
The tape I bought was too wide so I sewed it on higher than the instructions and then trimmed away the excess in order to turn it up and sink stitch from the right side.
The finished collar from the inside. The green is a very difficult colour to photograph and the zip and tape are a slightly better match than they appear here. I bought both of those from Frumble Fabrics, they have a wide selection of all sorts of haberdashery that I haven’t seen elsewhere.
I finish overlocking by putting the threads on a large-eyed tapestry needle and slot it back through the stitching for a couple of centimetres like this which keeps it secure and tidy.

This fabric is quite pricey but, in my opinion, it’s really lovely quality and it sewed together beautifully. There’s just enough stretch and it would be a good weight for sweatpants or a sweater dress too if you’re tempted. This is the first time I’ve used a range of co-ordinating fabrics and the finished result is really pleasing. Equally you could mix and match colours or prints using remnants for this pattern too, because of the way it’s cut in segments, especially if you go for the full zip version. 

T has gallantly modelled the finished result-he’s delighted with it-he’s usually my slightly impatient photographer so the boot was on the other foot today!

Have you sewn anything for the men or boys in your life? How do they feel about it? Luckily T isn’t very demanding where his threads are concerned and he’s always been very happy with the items I’ve made him so far…..I haven’t attempted trousers in years though so perhaps that will be next? I’d interested in which patterns or fabrics for men you have been able to source, I think it’s an area for improvement in sewing terms.

Until next time, happy sewing

Sue

A few hem finish suggestions-a Sew Over 50 topic

Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.

Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.

I’m beginning here with a faced hem…

This was the hem of the first Refashioners project I attempted. It was a jacket made from two pairs of my husband’s old jeans and because I wanted to use as much of the reclaimed fabric as possible I cut shaped facings for the lower edge. As you can see I also finished the edge with bias binding I made from offcuts of dress fabric.
The inside of the finished jacket looked like this. I understitched the lower edge of the facing to help it roll better and also slip-stitched it in various places including the seams and pocket bags to secure the facing without the stitching showing on the front.
This is also a much more shaped facing on the hem of Tilly and the Buttons Orla blouse. This can be a beautifully neat finish on a curve, it gives some ‘weight’ and crispness to the hem too and makes it less likely to curl upwards on blouses for example.
This Orla blouse was from 4 years ago, I like the exposed zip in the back too (the instructions for putting it in were excellent if I remember correctly)

The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.

Helpfully, my fabric had horizontal stripes, some opaque and some sheer so I started by placing the crin on the front of the fabric and lining it up with the bottom edge of an opaque stripe. It is stitched on very close to the edge being careful not to stretch the crin as I sew, it’s important it lies flat. By sewing the crin onto the right side of the fabric when you flip it to the inside the raw edge of your fabric is enclosed underneath. To be honest I was making up the method as I went along because my experience of this technique previously came from altering wedding dresses which used it so this isn’t foolproof. I would strongly advise you to try a few samples first so that you have the version which looks best for your particular garment. [the eagle eyed amongst you might notice in my photo that I’ve sewn the crin to the wrong side of the fabric! I obviously did it and photographed it before realising what I’d done. As this was four years ago I don’t have any other photo!]
Once the crin is turned up to the inside I slip-hemmed it by hand, it looks a bit messy on the inside because the black shows up but it’s absolutely fine on the right side.
the finished dress, it’s one of my favourites I’ve ever made, and it’s a partial-refashion too because the velvet bodice used to be a skirt!

If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.

The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.

Sew the binding on very close to the raw edge, this was a Simple Sew Lizzie dress
Here I made my own binding which is first sewn on with a 5mm seam allowance and then understitched which is what you see here. I made this Grainline Farrow dress for a magazine review
The hem is turned up and I’ve slipstitched it in place by hand.
This is the same technique with ready-made bias binding.
the finished skirt.
My final example is the little christening gown I made from a wedding dress.

If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.

This is one of my variations on the Camber Set
I roll-hemmed a straight strip of fabric here which I then pleated onto the sleeve using a fork!
I roll-hemmed a straight strip top and bottom and gathered it onto the sleeve here.
An extended length sleeve on the River pattern from Megan Nielsen, roll-hemmed and elasticated

I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.

Using strips of iron-on interfacing to stabilise the area where the cuffs fold up
This is felted-type woollen fabric where hand stitching is unlikely to show through but if you have a finer fabric I would make the interfacing strip wider so that I then caught the inter with my stitches and not the fabric itself. See the next photo to explain this better.
You can see the interfacing is above the hem line here and I’ve herringbone stitched it by hand. You can also see how I’ve created a chain link to anchor the lining to vent opening on the back of the skirt.
the hemming stitches aren’t visible from the outside using this technique.

For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.

If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.

Personally I always think the stitches show a bit too much no matter how hard I try to get them really tiny. It’s very easy to catch a bit too much fabric, or none at all! In truth I probably don’t practice enough!!
This Regatta dress from Alice & Co was an ideal application because the skirt has a straight, unshaped hem.

I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.

the binding is sewn on the inside first
the binding then flips to the outside to become visible.
This dress was made for the Simplicity pattern hacking challenge last year
Instead of the usual hem on this dress I created a casing which I threaded elastic through.

I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.

the hem from the inside
the finished hem from the outside.
the finished dress, I was off to a wedding!

The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.

Inside the hem the corners are mitred.

Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.

Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.

turn stitch and trim
make another narrow hem, stitch a second time on top of the first line. Press. There will only be one row of stitching visible on the outside.

If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.

attaching a band to the hem.
The finished dress (worn with walking shoes during lockdown!)

This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.

I put a piece of Stitch and Tear behind the fabric as I sewed.
It looked like this after I finished
It will look like this on the reverse.
gently pull away the backing and then carefully snip off the excess fabric up to the stitching line.
Eventually the hem looked like this, the sleeves are trimmed with Broderie Anglaise

I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…

I had some narrow strips of white cotton lawn lying around so I joined them to make a piece long enough to go around the whole hem.
I folded the strip lengthwise.
attach the strip to the hem, raw edges together.
I understitched it, plus there’s a band on the front which is what you can see folded over in order to enclose the facing eventually.
The band folds back to enclose the hem facing.
There’s a little bit of puckering on the reverse here but this is invisible from the front, a good press will sort that out.

To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.

Stitching the hem with the overlocked edge rolled to the inside.

This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.

the bias strips were applied right side to wrong side on the shorts hems.
the bias strip is on the inside at the moment
It is then turned up to the outside where I trimmed and stitched it with ricrac braid.

I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!

Until next time, Happy Sewing

Sue

The Refashioners 2017…suits you!

In 2016 I took part in Portia Lawrie’s Refashioners competition for the first time when I made a jacket from two pairs of Mr Y’s old jeans, you can read about that one here. I was jolly pleased with it and wear it a lot and obviously I didn’t win although I did get a mention in despatches so I was chuffed with that.

For Refashioners 2017 Portia announced it would be SUITS! Eek, I thought, I’m not sure about that…anyway, nothing daunted, I started thinking about what I might be able to do if I tracked down the right suit. I knew I didn’t want anything too dark or work-a-day so I hoped to find something in a check perhaps. Funnily enough it didn’t really occur to me that it could be something like linen or suede, or a woman’s suit so when the inspirational Blog Tour throughout September started and it featured some of alternative fabrics I did think “oh, why didn’t I do that?” Hey ho…

When it came to inspiration however there was only one person whose tailoring I was interested in and that was Alexander McQueen. The retrospective of his work ‘Savage Beauty’ at London’s V&A museum in 2015 was absolutely mind-blowing-I went 8 times! [I bought annual membership to the museum so that I could go as often as I wanted, it’s fair to say I got full value for my money. I’ve kept up that membership ever since and use it regularly] Whilst I’ve no hope of ever acquiring or wearing McQueen (apart from my treasured silk scarf which Mr Y bought for me at the end of the exhibition) I greatly admire his meticulous tailoring, originality, attention to detail and craftsmanship which has been ably continued since his death by Sarah Burton. [I didn’t blog about Savage Beauty at the time but I wrote one about a fascinating parallel exhibition that was at Tate Britain, you can read that here]

Portia had set up a Pinterest page of inspiration too so I had a look there as well as internet searches of my own and the book which accompanied the exhibition and is full of wonderful images. So many clever ideas but there would be serious fabric constraints as I only wanted to use one suit, once I’d tracked it down, which meant some things like dresses with elaborate details would be impossible. If I was going to invest quite a lot of time into this it needed to fit me and I’m not a stick insect so I have to be realistic!

McQ embroidered shoulder
McQ black gold blazer

I collected ideas and images although some of them were unlikely contenders, for reasons of practicality, quantity of fabric and my own skill level. [I went on a tailoring course at Morley college in London last year and picked up loads of useful skills and the confidence to tackle this head-on, have a look at their prospectus because they offer some great courses] I liked the idea of combining different fabrics and techniques, particularly over or near the shoulders.

I scoured all our local charity shops but didn’t find anything I liked, Mr Y and my Dad didn’t have anything in their wardrobes either. Then, when we were visiting Salisbury in Wiltshire at the end of August, we tried a couple of shops when I spied a black and white checked jacket. It seemed to have trousers with it which didn’t match but these were Prince of Wales check! Looking further along the rail we discovered the right jacket for the trousers was on another hanger-yippee, success! a matching suit in the perfect fabric. It was £25 which was a bit more than I had hoped to pay but the money would go to a good cause so it was a win/win situation really. Even better was the fact it was 100% pure wool and it was a Daks suit from Simpsons of Piccadilly which would have been pretty expensive originally-I definitely lucked out with this one. At £25 though it did mean I would only use one suit rather than buy possibly 2 to mix together. No matter.

So now that I had the suit I needed to come up with a design. I also set myself the rule that I wouldn’t buy anything else so everything had to come from supplies I already had in my workroom. I tried to be a bit ambitious-and different from last year-and initially came up with a few dress designs where I thought I might be able to utilise the trouser legs to make panels and a feature-zip detail.

Before I went too much further though I needed to disassemble the suit to see exactly how much fabric I had. I got out the snips and unpicker and set to (not without trepidation because it was a lovely suit)

The beauty of pure wool is that it presses like a dream and so almost every original crease in the suit disappeared once I’d broken it down into all the parts. Needless to say there was less fabric than I’d hoped for my big plans so I had to modify them a lot. Out went the dress and in came [another] jacket. I’d been looking through my not inconsiderable pattern stash for inspiration and I’d found a dress pattern from 1973 which was amongst a huge number gifted to me last year by a friend. They had belonged to her Mum who was a fabulous dressmaker at Cresta Silks in her youth. Even though it was a dress I was attracted to its striking style lines with a long bust dart that ran parallel to a diagonal under-bust seam, and because it had a centre front seam I thought it was easily adaptable to a jacket. One of the features of McQueen’s work is his unusual seaming and style-lines so I decided to make a toile and see how it went.

IMG_0053
fullsizeoutput_1ed2

The original collar opened at the back for the zip so I made a new pattern so that it opened at the front instead. I also had to change the front and back ‘skirts’ by dividing them evenly in half because the pieces would be too large for the fabric quantity I had. I also wanted to be able to cut various pieces on the bias to make it more interesting so they had to be smaller to achieve this.fullsizeoutput_1ecd

By using an open-ended zip I minimised the amount of fabric needed for the front opening, there was no need for an overlap and there’d be barely enough anyway. I also knew that if I could use the original sleeves I would be be able to use all other available fabric for my design.

Amazingly I was happy with the toile and decided to press ahead with the design as it was. I could get the new front panels out of the original, and even managed to include the breast pocket and all the under-linings. However I couldn’t work out a way of satisfactorily utilising the pockets and flaps so they got left out. In the end I couldn’t use the back as per the toile, which had darts and the pattern piece was too large to fit as it was, so I turned the darts into princess seams instead and then those pieces came out of the original back after all. There was a tiny hole in the back but I repaired it with iron-on interfacing and no one would be any the wiser. I’d wanted all the peplum pieces to be on the bias but in order for them to be a reasonable match some had to be on the straight instead.

fullsizeoutput_1ec3
I’d removed the buttons and facing so that it was as flat as possible. it did mean that the original darts would now be part of the new front though.
fullsizeoutput_1ec5
Instead of using the paper pattern I laid the first cut piece on top of the opposite side so I that I had perfect placement on the checks. Luckily the buttonhole [which I could do nothing about] got absorbed into the seam allowance and didn’t show in the end.

 I won’t pretend that every seam has perfectly matching checks but given the fabric constraints I’m really pleased with the outcome. I carefully made the jacket up, a very enjoyable process, and because it was being fully lined I didn’t need to neaten any of the seams inside, they could just be pressed open. I remembered my tutor Daniel at Morley saying “steam is your friend” and wasn’t afraid to use it often, in conjunction with my tailor’s ham and a pressing cloth.

The trickiest part of the construction was making the original sleeves a little shorter for my arms and to fit into the new armholes. I roughly measured the sleeve head and compared it to the armhole. There was a fair difference so I needed to reduce the sleeve width by sewing up some of the under-arm seams to about elbow level (they are two-part sleeves) I tacked one sleeve in and tried it out. It looked pretty satisfactory without any further adjustment so I did the same to the other one as well. I tried to ensure that the checks matched as best I could too. Again I tried the jacket on to make sure I could move my arms and that I was happy with their length. After I’d machined them both in I reused the pieces of canvas and domette which I’d taken out of the original sleeve heads. These are part of tailoring construction which help give a good rounded shape to the sleeve head and are basted in place by hand onto the jacket seam allowance itself. I also planned to reuse the original shoulder pads later on.

IMG_0020
sewing the original canvas and domette back into the sleeve head.

Once the sleeves were in I could think more about the decoration I wanted to add. One of the recurring features I like about McQueen’s tailoring is his use of lace appliqué and embroidery. Amongst my stash of fabrics I have some beautiful black Guipure lace which was left over originally from the bridal shop where I used to work creating and making the most beautiful wedding and evening gowns. I’d used some of it on my elder daughter’s Prom dress 10 years ago but there’s still some left over so I had a little play. I put the jacket on Doris and draped pieces of lace over the shoulders to see what looked best. Part of the beauty of Guipure is that you can trim it into shape without it fraying or falling to bits so once I’d positioned it where I wanted I could trim it to neaten the shape. I love the swirls!

IMG_0036
I wanted the front to have a small glimpse to the lace…
IMG_0031
…but the surprise is at the back….
IMG_0030
…with the lace extending up the collar, over the sleeve head and down the back.

Looking at these photos you can see the other decorative technique I decided to use, embroidery.

I’d seen a very recent McQueen design which had red lacing on and I wanted to incorporate something similar probably in the form of hand embroidery instead, particularly because the fabric has a fine red stripe running through it.

McQ embroidered

I had a few practices first at simple running stitch, sashiko-style, and I tried a sort-of feather stitch but it looked pretty rubbish and uneven as I couldn’t get it right or consistent so I tried a couple of stitches of the many that my  25-year-old Elna 7000 machine offers.

I liked the feather stitch but decided it would be over-doing it so in the end I settled on the saddle stitch which would normally be used to top stitch but I was going to run it along some of the red stripes in the fabric for emphasis. [If you’re not sure which stitch this is on your machine it’s the one where the picture looks like 3 rows of stitches side by side. It’s actually 3 stitches on top of one another when it sews thus making an effective top stitch]

IMG_0024
stripes from the inside, including the repair to the hole I mentioned.

I decided to follow a few of the red stripes on the front and back, the front ones all run vertically and the back ones are just on one side in a cross formation. I considered putting them elsewhere too but decided there was enough.

Once I’d finished all the decoration I put the shoulder pads and the ‘plastron’ back in (this is a piece of heavy canvas which is part of the underlinings of tailored jackets and which helps give it a smooth line over the chest) The plastron needed to be trimmed slightly to fit inside since it had come from a man’s jacket. Finally I’d managed to salvage just enough fabric in one long strip to make a very narrow facing inside the zip. I turned up the hem first basting it in position and then herringbone stitching it by hand.

IMG_0023
basted and herringbone-stitched hem

I’d found some black lining fabric in my stash so cut out the jacket lining (excluding sleeves because they had their own original lining in) and sewed it together. Red lining would have been nice but I didn’t have anything suitable and I’d have broken my own rules to buy some. Because the facing strip was so narrow I wanted to smarten up it up a bit so I dug out some black braid which I stitched down the edge of it-it looks much better now if the jacket is open.

IMG_0041
Inside the jacket facing

Next I hand stitched all the linings in position at the hem and around the armholes so that everything was enclosed. The final thing I decided to do was change a couple of the cuff buttons so I swapped one on each wrist to red ones.

IMG_0043
idiosyncratic buttons!

And that’s all there is to it…..

fullsizeoutput_1f8b
fullsizeoutput_1f89
fullsizeoutput_1f88
fullsizeoutput_1f80
fullsizeoutput_1f8c
fullsizeoutput_1f85
fullsizeoutput_1f87
IMG_3969

I’m afraid I’ll never make much of a model and the backdrop was a choice of either a brick wall or a flower bed! The photos aren’t by Testino (Katie actually) but I hope you’ll get an idea of how the jacket looks, it’s a distinctive but wearable one-off.

I’m so chuffed with my finished jacket and, better than that, I really enjoyed the planning and making very much. I felt I got back in touch with lots of the skills I’ve acquired over many years of sewing, some of which helped me to plan it carefully within the constraints set both by Portia and the ones I set myself, and others meant I could stretch my making skills further than they tend to get stretched these days which is no bad thing.

Initially I wasn’t sure if this would be a refashioning challenge I could rise to but I’ve surprised myself with the outcome. I’ve now got a jacket which I’ll be really happy to wear and I shall enjoy telling anyone who cares to listen exactly how it came about. I don’t know the story of the suit before I bought it but I feel like I’ve given it a new narrative now by reinventing it in a new form….and that might even be something McQueen himself would have applauded.

As ever many pictures are my own but the rest are sourced from the internet.

Have you made a suit refashion this year? I’d love to hear about it, or tell me your thoughts about mine…(risky hehe)

Happy Sewing

Sue

Two years of Sew Over 50!! (where did that time go??)

So, here we are TWO YEARS on from the first SewOver50 post, on August 18th 2018, and the account now stands at nearly 21K members worldwide! 

Personally, I’d really like to thank Judith and Sandy for the amazing amount of work they undertake so graciously in order to steer the Mothership through some interesting and turbulent territory, especially the second half of these last twelve months. 

We were all trundling along in our own way when suddenly, in early 2020, the world went very weird indeed. As the impact of Covid-19 started to take effect many of us were locked-down at home, some still working but in a whole new way, reliant on technology to carry on, it was an extremely stressful time for many who could have no contact with their loved ones or friends, lots of sewing-related events we so enjoy were cancelled or postponed. Many of us found that our sewing and creative making was a safe haven amid what was going on around us. For example, did you make a pouffe? I had the luxury of being able to sew whenever I wanted, because I couldn’t go anywhere, and I noticed others embarking on this project so I took the opportunity to use up SO many scraps of fabric and stuff them all into a footstool, I made my own pattern but I know many of you used the ClosetCore free pouffe pattern. I know many others couldn’t sew as often but, from chatting with friends, the time that they were able eke out to sew was vitally important to them, helping them to de-stress and shift their focus for a while. Shopping for fabrics, patterns and haberdashery online became a way, almost the only way, of supporting some of our favourite businesses, as people found new ways to adapt and do business. Sales of sewing machines worldwide increased exponentially with many manufacturers and retailers struggling to keep up with demand. Some of us had sewing sessions with our friends via Zoom, which was occasionally technologically-challenging but it enabled us to be in touch with each other whilst participating in our shared interest. I’m not going to dwell here on the pandemic though because it’s been different for all of us, sewing and being in touch with my sewing friends around the world has been an absolute lifeline for me personally. In fact, rather than watching the all-too-overwhelming daily news stories, it’s enabled me to hear and appreciate what people I feel I’ve come to know have been going through. At one stage it seemed anyone who was able to was using their sewing skills to help with the desperate shortages by making scrubs here in the UK, and possibly elsewhere, and mask-making has become something that people with little previous sewing experience have found themselves being able to contribute. Face coverings have become compulsory in many places now so this will be an ongoing activity in future.

Moving on, as a group @SewOver50 has always strived very hard to be inclusive of anyone who wishes to follow along, after all, part of the reason it started in the first place was because we felt somewhat excluded from sections of the sewing community by virtue (?!) of our age. Following the murder of George Floyd in the US we were all called to question the part we play in our world, even within our sewing community we had to examine our consciences to ask if we were doing enough. #BlackLivesMatter was rapidly followed by #BlackMakersMatter and there is now an Instagram account @BlkMakersMatter where you can see, and follow and support, the massive diversity of BIPOC makers, and not just sewers but crafters and makers of many beautiful things. Many of our wonderful stalwart SewOver50 followers including Diary of a Sewing Fanatic are vocal advocates, I’ve always got time for Carolyn’s no nonsense plain speaking! We shall endeavour to continue reflecting our membership, and involve a diverse range of contributors and guest editors in the future. If you have ideas for future topics, especially if you think we’re missing something important, do please let us know.

So, very briefly, that’s the worldwide picture (as it currently stands) in which there have been quite a few SewOver50-related things going on during the past 12 months too. My personal favourite was our very first, and fortuitously timed, official meet-up in London in late February. Judith was able to join me to co-host and I was thrilled that so many generous companies large and small sponsored prizes for the charity raffle we held. I think, without exception, everyone who attended enjoyed themselves and agreed we would have liked even longer to chat and create new friendships in real life, just weeks later the event couldn’t even have happened. We had high hopes of more of you being able to host your own meet-ups where ever you are in the world but that’s still not really possible, make sure you let us know if you do manage it! Above all though, stay safe! 

still no luck for Judith using my homemade teleportation device…must try harder

Stalwart supporter Maria Theoharous in Sydney started her own podcast Sew Organised Style in September 2019 and she generously created a space for Sew Over 50 every Thursday! Judith, Sandy and myself have all chatted with her but you can also listen to a growing list of our fellow followers every week chatting about what sewing, crafting and Sew Over 50 means to them. It’s really lovely to actually hear their voices, talking with enthusiasm about things they are passionate about. 

At the beginning of May ClosetCore Patterns paid the ultimate accolade to one of my personally most inspirational sewers, Blanca, by naming a pattern after her, it’s a stylish flight/boiler/jump suit (call it what you will) but I love her personal aesthetic and she absolutely rocks this outfit! 

photo credit Blanca via Closet Core Patterns

In the UK during the spring, and at the height of lockdown, we had series 6 of the Great British Sewing Bee to enjoy. It featured several fellow dressmakers who we can claim to be representing ‘us’ on national TV. Yes, we know they are ticking boxes to cast certain ‘types’ but at least this time it’s positive discrimination! Even so, 10 weeks went by far too quickly!

Over the year the account covered all sorts of different topics for discussion including, do you always make a toile or just happy to wing it? What are you pet sewing peeves? (cutting out and pattern tracing seemed to be top for this one!) The art of tutu making was a personal favourite, having always loved ballet and especially the costumes. Tips for better and more accurate top stitching was another goody and @SewitwithDi gave us a master class in using the correct interfacings effectively. There are too many others to mention them all but you can refer back at any time, take a screen shot of your favourites or save them to your archive for future reference.

More recently the account reached, and has now surpassed, 20,000 followers! This was marked with a giveaway where two people who had not necessarily met in real life but had formed a friendship through sewing could each win a copy of the same pattern. If you take a look at the hashtag #so50sewalong you can see some of the garments that have been made since this competition ran a couple of months ago. Incidentally, it’s worth mentioning that the #sewover50 hashtag has now been used almost 80K times up to this point, it’s an absolute wealth of inspiration and knowledge which is all yours for the taking! 

I think many of us enjoyed the opportunity to look back through, and share, some of our holiday photos wearing our me-mades. Sadly many holiday and travel plans haven’t been able to happen this year so it was a lovely way for us all to virtually ‘travel the world’ over the course of a weekend. Lots of us wore those clothes anyway, even if we couldn’t leave home! The online virtual Frocktails in April was another excuse to dress up a bit, knowing our friends around the world were raising a glass to each other at (almost) the same time.

joining with Virtual Frocktails, my dress is self-drafted

Have you been keeping a #so50bingo card? This has been an ongoing way of keeping tabs on what you have been sewing and other techniques/events you could challenge yourself to try. No pressure, it’s just a bit of fun with no time limit. 

During the year I wrote several blog posts based around different topics including sewing advice for newbies (or returners for that matter) your go-to T-shirt patterns, what do you take into account with your fabric buying choices, are you a batch cutter/sewer or just one thing at a time? Judith and I both contributed videos as part of the online Sewing Weekender, this is normally an event held in Cambridge, UK but The Fold Line opened it up worldwide as an online event and it was a huge success with over 1,700 people ‘attending’ from all over the world. 

We also held the second #so50visible challenge earlier in the year, we seem to be having success with getting our images reposted by lots of pattern companies which is a very good thing but notably few are choosing older models-with a few honourable exceptions-to represent their patterns in the marketplace. This is still very frustrating when you look at just how many stylish and inspirational people follow this account but if we all keep plugging away a change will come. One thing that pattern companies have said to us is that the quality of photos isn’t always good enough for them to reshare so the better, and clearer, you can make your photos to show off your makes the more likely it is to get reposted. There have been a number of posts with simple tips on how to improve your photos so why not check them out?

Most recently our own Leader Judith has written an article for bi-monthly US-magazine Sew News talking about Sew Over 50, which you can order online.

So, in spite of everything, lots of good things going on for Sew Over 50 in the last twelve months, some progress being made with representation but I’m sure you’ll agree that isn’t all the account is about. I hope you continue to find the account as inspiring as I do? Yes, we all start off by being here for the sewing but it often becomes so much more than that. Real friendships have been forged as a result, very few of us have ever met one another in real life but that doesn’t stop us identifying and empathising with each other and the lives we lead, especially during these last few extraordinary months. 

I am deeply indebted to Judith and Sandy for the sheer dedication they have on our behalf, and I’d like to thank all of you for your kind words of encouragement, support and appreciation to me personally, I love being a part of this worldwide community of sewing and I can honestly say the last few months would have been very different without so many of you connecting and interacting with me in some way. 

Thank you, and until next time,

Happy sewing!

Sue

Simple Sew Chelsea Collection blouse hack.

A lot has happened since I wrote my last Simple Sew blog post, Christmas for one thing, and I had a lovely holiday in the sunshine too but now we are all confined to our homes because of Covid 19. Without wishing to trivialise the gravity of this situation, one of the side effects of it is that you might have more time to sew. 

I’ve had a rummage through my Simple Sew patterns to find one which I haven’t already shown you, and which has opportunities to hack, and I settled on the Chelsea Collection. This is a capsule wardrobe of a short sleeve blouse with two variations, a pair of trousers and a button-front skirt in two lengths. I liked the blouse with it’s shirred sleeves and keyhole back detail but I decided to mix it up a little by adding a button front. Normally we are able to select fabric from a couple of generous sponsors but I wanted to ‘shop my stash’ to find something this time. I found a very pretty vibrant floral John Kaldor cotton lawn which I think I picked up from a swap table sometime and I knew would work well for the blouse. 

I didn’t want the blouse to be overly tight so, after checking my measurements I opted for a larger size than I’ve made previously. If you’ve been a regular reader of my posts you’ll know that I tend to check Simple Sew patterns for any discrepancies before I start. There didn’t seem to be any glaring ones but I just added a slight curve to the back hem so that it dipped in the same way as the front and I trued the shoulder seams so there was a smooth flow from front to back. 

Adding a curved hem to the back, I measured the distance from the lengthen/shorten line on the front then made the back the same amount, curving the line gently upwards to the side seam.
trueing the shoulder seams

As I wanted to alter the front significantly I had to make some changes there first. In order to create a button-stand I simply added 2.5cms to the centre front all the way down what would have been the fold. [2.5cms was a fairly arbitrary figure because it depends really on what size buttons you’re using, a general rule of thumb is that the bigger the button the bigger the button-stand needs to be so that there’s enough overlap and the garment doesn’t end up too tight because the overlap isn’t big enough.]I was able to do this by drawing directly onto the tissue before cutting the piece out as there was enough space to do so.

adding the button stand to the front

If you’ve already cut a pattern that you want to add to just stick some extra paper to the centre front fold line, or trace off the whole piece again adding the extra. The original front had a facing for the neckline so now I needed to create a new facing which would neaten both the neck edge and the button-stand. To do this I simply traced off the whole of the new front opening including the neck edge and made the facing a depth of 7cms all the way down from shoulder to hem, with a smooth and gradual curve. The photo should make this clearer. The back neck needed a new facing too because the existing one took the armhole into account. Again I traced off the section I needed making it 7cms at the shoulders to match the front facing. 

The final change I made was to lengthen the sleeve a little and add some more fullness to it. I started by making the sleeve 5cms longer and then I drew 3 vertical lines on the pattern at approximately the front notch, back notch and shoulder seam points. [Depending how much extra fullness you want to add to a sleeve you could use more places than this but do try to space them evenly apart.] Next I cut up each line from the bottom until I reached almost the top, I left this very slightly attached. With the piece flat on the table I spread the bottom of each slit by about the same amount, probably about 4 cms, then taped slithers of paper into each gap.

First I added the extra length and then drew the vertical lines where I wanted the extra fullness.
Next I opened each part to add the extra being careful to keep the pieces flat and not twisting or wrinkling up, put extra pieces of paper under the gaps. Once you’re happy tape them in position,
Once I had added the extra I cut the piece out.

If you don’t want to cut the pattern up you can do the same process by still marking the vertical lines on then pivoting the uncut pattern at the top of each line, use a pencil or your finger as the axis. Draw or trace around the first section, which remains stationary, then each subsequent section after you pivot it to so that you get the extra fullness being added at the hem. Opening up the wedges in this way means you’re adding fullness to the hem but not the crown of the sleeve, if you want extra fullness in the crown spread the whole piece more or less parallel. The grainline should run equidistant down the centre of the new piece (unless you want to cut it on the bias)

Having done all this I cut it out and was ready to sew! 

I started by joining the shoulder seams of both the blouse and the facings (which I’d interfaced and neatened) then I attached the facings to the neck edge, turned, understitched and pressed. The keyhole back calls for a small rouleau tube as a button-loop which needs to be inserted at the same time as applying the facing although you could choose to make a hand sewn thread loop and stitch that at the end. In fact it isn’t even vital that this is a functioning loop if you’ve got a front opening, the keyhole is purely decorative now. 

I put the blouse onto Doris to check it was looking OK and this was when I found that the keyhole appeared to be bagging outwards quite significantly. I decided not to do anything at this point and I would check again once I had sewed the side seams and put the sleeves in, then I would get a better idea by trying it on myself. 

Checking the front neck
With the loop pinned I discovered that the keyhole didn’t sit flat.
It seems to stick out quite significantly on Doris.
If the button isn’t done up it would look like this.

I made three rows of shirring on the sleeves next, using my quilting guide to make sure the first row was 5cms from the bottom edge, the next two rows were then sewn parallel to the first. [Refer to a previous blog post on how to sew shirring if you haven’t done so before] Next I sewed up the sleeve seams and pin-hemmed the bottom edge to give a neat finish.

I positioned the needle 5cms from the cut edge and the quilting guide helps me as a visual marker to keep it parallel all the way.
Shirring is stitched from the right side so that the elastic is on the reverse. Use a long straight stitch, secure both ends and then apply plenty of steam to shrink up the stitching further.
finished sleeve

After sewing up and neatening the side seams I inserted the sleeves. At this point I tried the blouse on again to check the keyhole on myself and, with real shoulder blades under it, it didn’t seem so noticeable. Two other things struck me though, the blouse was a little too big so I took it in on the side seams and also the blouse was a bit shorter than I expected. In order to take as a small a hem as possible I made some bias binding from offcuts of the fabric then stitched it (folded in half lengthways and with the cut edges together) to the hem using a narrow 5mm seam allowance [This is a useful finish to any hem or edge where you need every spare centimetre of fabric.] Have a look at the photo which shows you how to get the ends of the binding enclosed within the front facing. I turned the binding up and top-stitched in place. 

If you’re adding binding when there’s also a facing pin it like this so that the end is neatly enclosed inside the facing when it’s turned right side out.

Finally, I found some ‘vintage’ buttons amongst my treasure trove and there were just the right number meaning the whole blouse had been sourced from what I already have!

Well I hope now that I’ve made it that I’ll have a chance to wear my Chelsea blouse somewhere other than in my own garden this summer, who knows? Maybe you’re reading this long after the emergency ended and life has returned to some sort of normality, although it definitely won’t be exactly as it was before.

Sewing our own clothes is an activity which gives us so much enjoyment for a variety of different reasons and, right now, the simple act of creating something is chief amongst them for me. It’s absorbing and the problem-solving gives me something else to think about.

I think the keyhole back is, by and large, just about acceptable when I’m wearing the blouse. I also think the cure could be to add a centre back seam instead of cutting on the fold so that the point of the keyhole could extend beyond the centre back line, this would hopefully bring the button and loop closer to one another when they are done up…this is just my theory based on experience and I haven’t tried it out. It’s such a nice little detail that I’m disappointed it hasn’t worked out quite right. I also regret not reading my fellow Simple Sew bloggers reviews of the blouse because then I would have known how short it comes up, personally I would add a minimum of 8-10cms to the length next time.

The sleeves are pretty and feminine but maybe they are a little too girly, the jury is out…

Until next time, happy sewing

Sue

Simple Sew Notch Collar jacket

Usually when I write a Simple Sew blog post it’s a garment for me but this time the finished article is for my friend Janet. We had a shopping trip to London’s Goldhawk Road a little while ago to choose fabric for a dress for Janet’s daughter to wear to a family wedding and while we were in Classic Textiles we got distracted and spotted this lovely pastel tweed. There wasn’t a lot left so she snapped it all up as well as some pretty matching lining, we didn’t have a pattern in mind but I knew I’d have something suitable at home.

7F25EBC3-35F6-4B5F-B24F-108F2F1DEE9C
I didn’t realise I even had the Notch Collar jacket, it turned up when I had a recent tidy in my work room.

The jacket got put on the back-burner for a few months because I had the dress for the wedding to make first, and then a last minute dress for Janet herself to wear too so it dropped down the priorities.

With the wedding out of the way in August I could revisit the project. Because there wasn’t a lot of fabric and there could be tricky pattern matching to do I didn’t want a pattern that was too complex with a lot of pieces so when I found the Notch Collar jacket I thought it would be perfect.

If you’re going to make this jacket yourself I would say it’s VITAL to make a toile first. In my opinion it’s quite narrow across the front and shoulders so if you’re fuller-busted you will probably need to do an FBA.  With this in mind I was really pleased, and a bit surprised, when the toile fitted Janet perfectly with no alterations but then she is quite petite build.

 

If you read my pattern reviews regularly you’ll know that I’m not usually a ‘tracer’ but because Janet is so much smaller than me, and I may want to use the pattern again sometime, I opted to trace this one. If you’re short of fabric or if it’s going to be tricky pattern matching it can be really helpful to make pairs of any pieces that require 2 eg. Left front and right front, a pair of sleeves or the whole back rather than just place on a fold. In this case though I folded the fabric carefully in half and pinned in numerous places through the fabric so that I knew the checks were matching on the under layer.

IMG_8271
Pin through the same spot on both layers.

 

Because of the wide width of the fabric I could easily place the front and back side by side so I knew that the check would match down the side seam as far as possible. Because of the dart it wouldn’t match near the underarm seam though, this is inevitable.

fullsizeoutput_28f6
Front and back side by side on the fabric matching from hem level upwards, it will go off slightly because of the dart.

I didn’t cut out the sleeves in tweed at this stage. I cut everything out in lining too with the addition of a pleat of extra fabric in the back to allow for movement. I also cut facings which incidentally I’d made a lot wider than the originals-I think they are too narrow. [later on I discovered that there’s no lower back facing piece and very little hem allowed to turn it up either. I made my own by tracing the lower edge of the back pattern up to the same depth as my front facings-8cms-so that they match when joined at the side seams.]

To stabilise the tweed and give it some extra body I interlined the fronts and back with some calico and basted it to the tweed within the seam allowances around the edges. This is known as ‘mounting’ the fabric and is a very useful technique if you have a fabric that needs stabilising or a little more body for some reason.

I immediately disagreed with the instructions here because, after making the darts, the first thing I would do is make the pockets and sew them on. Because the fabric frays quite a bit I opted to use some lining as well as the facing to ‘bag out’ the pockets. This makes them more stable as well as neater. After matching the checks I top-stitched them on but that pushed everything out of alignment so I ripped that stitching out and hand-sewed them on instead. These aren’t pockets that will need to take a lot of weight so they should be plenty strong enough.

 

 

After joining the shoulders and side seams I pressed the seams open with plenty of steam over my tailor’s ham and gave them a good bashing with my wooden clapper to knock the steam out and flatten the the seams effectively. I used it on the darts too. If you don’t have a clapper you could use a wooden rolling pin if you have one.

fullsizeoutput_2980
Tailor’s ham and wooden clapper

Things got trickier after this because I had to match the sleeves to the checks of the jacket. Initially I did this by lining up the pattern piece again the jacket on the stand and drew some guide lines onto the pattern. I was reasonably sure this would work so I cut out a pair of sleeves…I was wrong. I’d placed the pattern piece onto the fabric but it was matched to the wrong set of stripes. Damn and blast! Fortunately, I still had enough fabric left for another pair of sleeves and I could cut the front facings out of the incorrect sleeves instead.

IMG_8286
I cut the front facings out of the incorrect sleeves

IMG_8287
My pencil markings indicate approximately where the pink stripes are in order to match the facing to the front as much as possible.

I tried a different approach to matching the sleeves. I took the whole piece of remaining fabric and offered it up to the jacket armhole on the stand where I pinned it in position. This seemed to work so I carefully thread traced the crown of the sleeve, removed the fabric again and then laid the pattern piece on top.

IMG_8307
I pinned the whole piece of fabric to the armhole matching the stripes as best I could.

IMG_8308

IMG_8309
Thread tracing the sleeve crown

fullsizeoutput_28f4
Then I traced around the whole sleeve slightly outside the pattern ( to allow a margin for error) I could then place the pattern in a corresponding area of check for the second sleeve  so that it, hopefully, matched the jacket too!

Obviously I needed a second sleeve so I had to cut the first one, remove the pattern, place it in the correct position for that sleeve to match and cut it out. If I got this one wrong there was no Plan C…. I’m extremely relieved to say that all was well-phew. One of the benefits of the tweed is that you can make the slightly loose weave work in your favour so I ran the usual two rows of ease stiches around the crown and tacked the sleeves into position.

fullsizeoutput_28f9
I gently pulled up the ease-stitches in the sleeve head before putting each sleeve into the armhole. the red stitches are the markings from where I placed the paper pattern on the fabric.

IMG_8335
Sleeves inset

One fitted perfectly first time and the other I had to reduce the amount of fullness over the crown to make it fit, and still have the checks matching. At this point Janet popped round for a fitting and we were both very relieved that it fitted really well-high fives all round.

One tip I’d give as a result of doing quite a few alterations on coats and jackets is to use a wide strip of iron-on interfacing at the cuff to give it a crisp edge.

 

This is the sort of soft-tailored jacket which will benefit from a small shoulder pad. We aren’t talking ‘Dynasty’ or ‘Dallas’ 80’s shoulders here, just enough to give a little more definition to the shoulder-line. I didn’t have anything suitable so I made a pair with some medium thickness wadding and covered them in fine calico.

fullsizeoutput_28fa
Wadding ‘pad-stitched’ onto calico

IMG_8340
The wadding is attached to one layer of wadding which is in turn stitched to another piece of calico along the shortest edge first of all.

IMG_8341
Snip the curve and flip the calico over to cover the wadding

IMG_8366
Fold the shoulder pad evenly in half and slip stitch it loosely in place along the shoulder seam on it’s underside..

IMG_8367
The shoulder pad extends very slightly over edge of the shoulder in order to support the sleeve head.

To line the jacket next, I interfaced the facings with iron-on Vilene and neatened the edges, then I stitched them wrong sides to right sides on the lining pieces.

fullsizeoutput_28f3
Back neck facing placed on top of the lining and stitched in place, I did the same with the front facings.

I made up the lining as a complete unit-fronts/back/sleeves-which in hindsight wasn’t the right order because after I sewed the jacket and the lining together all the way around the outer edge it meant I couldn’t under-stitch any of it. I should have sewn the lining in without the sleeves attached, under-stitched the neck edge first then attached the sleeve linings afterwards. Instead, I pulled everything through right side out and gave the neck edges a jolly good steam and wallop with the clapper again. Then I ‘stab stitched’ the edges of the front and neck edge by hand, and also a few stitches directly through the lower section of each side seam to keep the two layers fixed together. Finally, I slip-hemmed the sleeve linings in place.

IMG_8371
I stab-stitched through the side seams to hold the lower edge nicely together.

IMG_8370
sleeve lining slip-stitched into position

As I said before this is a ‘soft-tailored’ jacket rather than a very structured one, although I’ve used one or two techniques which I picked up on the tailoring course I did two and a half years ago.

The sparse making up instructions do have a few errors or anomalies which could trip you up. I set the sleeves in rather than on the flat which might not make any difference to the overall finish but the lack of lower back facing or sufficient turn up instead isn’t good, and it says there’s a turn up of 5mm on the cuffs when it’s actually 1.5cms, and in fact 4cms is what I used to give a better finish. I know some of the earlier Simple Sew patterns have a few technical errors and this is one of them but, with this in mind, don’t dismiss it because it’s an attractive little edge-to-edge jacket but make a toile first!

IMG_8373IMG_8374

I relieved to say that Janet is very pleased with her jacket and hopefully will get a lot of wear from it.

fullsizeoutput_2ac7fullsizeoutput_2accfullsizeoutput_2aceIMG_8971fullsizeoutput_2ad0

Until next time

Happy sewing,

Sue

Mayberry dress by Jennifer Lauren Handmade

Jennifer Lauren is a designer who is based in New Zealand and her patterns come in both paper and PDF format. She has several womenswear designs including dresses, tops, skirts and a cardigan, and there’s a man’s cardigan too and, just for a change, her newest pattern release is Nixie knickers! Her aesthetic is both modern and vintage, and lines are simple and unfussy with the occasional quirky detail which is what attracted me to her designs in the first place.

The Mayberry is a dress with a drawstring waist and an asymmetric button front, and 3 different sleeve lengths. It also comes with the choice of 4 cup sizes (A to D) alongside the actual bust measurement which means you should be able to get an excellent fit without having to do an FBA or SBA.

I was chosen as a reviewer for the dress and obviously I would be making the PDF version, so initially I was aghast when I thought there were 100 pages to print out! On closer reading it was clear that you only print the bodice front in the cup-size that you need, not all of them, phew! Also, you don’t have to print all the sleeves, only the ones you want. To help you decide which sets of pages you need to print there is a single page with all the plans for each section illustrated which is really helpful.

fullsizeoutput_1fcc
This is the ‘key’ to which sets of pages to print out

If you need help with deciding which size and cup you need to choose there’s a very comprehensive set of instructions, with illustrations, which should set you right. There are also several lay plans for the different sizes on different fabric widths so you shouldn’t have a problem cutting out.

As with previous PDFs I don’t print out the instructions, I read them as I go along. Jennifer suggests that you print out and stick together each of the sections, and then trace them off and cut the traced sheets out. I can’t be doing with all of that, I just want to get going but obviously the choice is personal so you might prefer to do the tracing/cutting out method.

IMG_4131
I’ve used a highlighter so that I can clearly see which line I’m following.

Once I’d got everything good-to-go I could cut out my fabric. I used a gorgeous plain aubergine-coloured fabric I’d bought about two years ago from the Man outside Sainsbury’s at Walthamstow market, I’m not sure what it is though, possibly challis. Either way it has a nice drape so would be ideal for the Mayberry. Other suitable fabrics would be chambray or soft denim, soft woollens or cotton lawn, Jennifer lists a few choices and also reminds you to wash your fabric before using it.

It’s really important to bear in mind when you’re cutting out the bodice fronts and facings that because they are asymmetric you mustn’t flip the pieces over if you’re using a patterned fabric because they could be all wrong if you do. You should be OK with a plain fabric just so long as it’s the same on both sides-not needlecord for example. a note on that-if you’re making the Mayberry in a thicker fabric for winter then you could cut the facings in a lighter contrast fabric for a neat touch and to reduce the bulk at the edges.

 

It’s an idea to highlight important information as a reminder to yourself. You may notice in the right-hand photo that my cutting out looks a bit inaccurate, this because the fabric is a bit slithery and moved about a bit so I had to check some of the smaller pieces carefully. I’m always very fastidious about cutting out because if it’s wrong before you start sewing pieces together it will only get only more wrong as you go, especially if you tend to be a bit sloppy with seam allowances too! You have been warned! 

Jennifer’s order of making has you putting the bodice together and completing the buttons and buttonholes at this early stage. This is good a good idea although it’s one that I didn’t follow!! That’s because I hoped to use some snap fasteners instead of buttons but I hadn’t got (and never did manage to get) any in the colour that I wanted. Eventually I used buttons so making the holes was less accurate than if I’d done them without sleeves and skirt attached, never mind.

One of the details I like about the Mayberry is the drawstring waist. I was really chuffed to find some cord in exactly the right colour in Anglian Fashion Fabrics in Norwich on my recent visit, along with some cute little metal stoppers (if only they’d had the snaps in the same colour too)IMG_4282

Delightfully, there are pockets in the side seams which is always good news! Joining the skirt to the bodice is pretty straightforward and I thought the instructions for sewing the casing were good. You sew a wide 2.5cms seam allowance first of all then you trim one side down and press under and stitch the remaining side down to form the casing.IMG_4278

The sleeves are nicely full without being overblown and they have a pretty, narrow band to finish them off. The instructions for making the sleeves and inserting them into the arm-scyes are very detailed, along with helpful illustrations. IMG_4281

I decided to finish the hem off by hand because I didn’t want a row of machine stitching showing but you can also machine it up if you choose.fullsizeoutput_2031

I think the Mayberry is a nice variation of the shirt-waister and I’ve made my version as a simple, elegant winter dress but I’ll definitely make more in other fabrics and with another sleeve length. You could make it in nice check brushed cotton for example, how about cutting the left front panel on the bias for a quirky feature?  I appreciate Jennifer Lauren giving me the pattern for nothing in order to review it and luckily I’ve been very happy with the outcome. I made the 14 with a C cup and the fit is very good for me. If you’re a bigger cup size than a D then you’ll still need to do an FBA but at least you’ll be starting from a better position.

fullsizeoutput_204f

fullsizeoutput_2054
T-dah! (that carpet needs a good vacuuming…)

This would be a good style to try if you’re an ‘improver’ and keen to try something a little more tricky. You need to concentrate when you’re cutting out, and making up too because of the asymmetric front but it’s a satisfying make.

Why not give it a try…

Happy Sewing

Sue

 

 

Sewing a no-pattern kimono in Liberty Tana lawn.

Creative Sanctuary asked me if I could teach a class for some kind of kimono jacket that used one of the gorgeous Liberty Tana lawns that they stock. I agreed but first I had to come up with a design!

We decided I’d limit it to just 1.5m of fabric partly because of the cost, but also because it’s quite wide anyway. Laura at the shop gave me a few of her own criteria if she were to make a kimono and I used them while I planned the design.

First of all I made a wearable toile version in some fabric I already had because I didn’t want to risk cutting up the lovely lawn and then it didn’t work very well. This worked to an extent but the sleeves were a bit too long and also a bit too wide, all flappy and annoying!

IMG_3622
Bit of a dobby finger in the way-oops!

Other than that I was happy with it so I went ahead and cut it out in the Tana lawn, and altered the sizing of the sleeve when I did so.

IMG_0033
Laying up the fabric (I must tidy the floor before taking photos in future!)

The size of rectangles needed for the back and two fronts was length 80cms x width 35cms each, one being on the fold [because the fabric is 140cms wide, anything less than this means you might not get fronts and back out side by side depending on your dress size] as well as two sleeves and the pieces needed for the collar. Because this fabric has a distinctive one way design the collar became a complex arrangement of sewing the 3 strips together in to one long piece and then cutting the strip exactly in half, rotating one piece, sewing it back together so that the 2 halves both had the design facing the correct way, rather than one side being upside down. From the 1m 50 of fabric I allowed 80cms for the jacket parts and 70cms for the sleeves and collar parts. The sleeves were cut singly and measure 70cms x 25cms each (the 25cms will vary depending on how long you want the sleeves) The 3 collar sections are 70cms x 12cms each on this sample, you could use the remaining fabric for patch pockets if you wish.

IMG_0044
Making the collar strip by joining the 3 sections first

IMG_0046
There’s interfacing ironed on to half the collar, Press the seams open.

IMG_0047
Press under one long edge by 1cm along it’s whole length.

The two front pieces of the jacket need to have a small triangle cut out at the neck edge so that it is shaped better when the collar gets applied to it.

 

I made a triangle that’s 40cms down from the top edge, and 10cms in. If you’re using a one-way design for goodness sake make sure you cut the triangle from the top edge and not the hem!

Firstly I joined the shoulders using French seams. [place the fabric WRONG SIDES together and stitch close the edge, approx 5 mm away. Trim if necessary. Turn so that the fabric is now RIGHT SIDES together, press the seam flat and stitch again 1cm from the folded edge.]

IMG_0037
first row of stitching for the French seam, wrong sides together then trimmed slightly. Press flat.

IMG_0038
the finished French seam should look like this.

You don’t have to use a French seam though, if you have an overlocker use that, or zig zag the edges, you can even use pinking sheers if you have any.

The neck looked a slightly awkward shape at this point so I trimmed a small semi-circle away from the back neck.IMG_0039

IMG_0041
shaping the neckline, make sure it comes from a right angle at the centre back fold, I’ve used an air-erasable pen to mark it.

The collar goes on now so start by pinning it first at the centre back neck then all the way to the bottom on both sides. Sew carefully in place.

IMG_0048
Collar pinned to the CB neck

IMG_0050
stitching collar in place, stop short by approximately 3cms  at each end. You’ll need this to make a nice flush finish with the hem and the band later.

IMG_0051
Press the seam towards the collar.

I turned and stitched the hem first and then the remaining gaps I’d left earlier at the bottom.

IMG_0061
Fold the collar band RS together and pin.

IMG_0062
Stitch in place, make sure it’s a right angle otherwise it won’t be in alignment with the hem.

fullsizeoutput_16a
Turn the band so that it’s RS out and pin on the outside.

fullsizeoutput_1f3
Pinning the band down on the right side ready to stitch in the ditch.

IMG_0065
Stitch in the ditch on the right side .

IMG_0066
Ooops, missed a bit! This should have been caught down on the wrong side.

If this process is too tricky for you then you can always slip stitch it down by hand.

Next I attached the sleeves. If you’re using a fabric that has a distinctive one way design with this method you must make sure that the front part of the sleeves are the same as the kimono front. It therefore follows that the back of the sleeve will be up side down but that’s unavoidable  unless you have a shoulder seam on the sleeve. Fold each sleeve in half and match this point to the shoulder seams, pin and stitch in place. It should look like this. IMG_0058At this point, if not before, you can fold and press up the hem for the bottom of the sleeve, it’s a bit easier whilst it’s flat before stitching it up later, you can see the pressing lines in this photo.IMG_0059Sew up the underarm seams like the photo above, and neaten by your chosen method. You can turn and stitch the cuffs now too, I turned them once by 2.5cm and then again by 2.5cms.

So that’s pretty much it!

I’m not sure if my instructions have been as clear as I’d like them to be, hopefully the photos offer some assistance. It’s a simple garment and not perfect by any means-the underarm seam isn’t particularly smooth but it’s just that, under the arm, so it’s hardly seen! You can simplify it further by not using a collar band if you wish and just hemming the neck edge.

fullsizeoutput_242fullsizeoutput_2be

fullsizeoutput_7d
Modelled by Katie, assisted by Tinker!

Sadly you may have heard that Creative Sanctuary will be closing at the end of September but before then all their Liberty Tana Lawn is reduced to £15.50 per metre which is a considerable saving on the full price. If you’re in the Hertford area before September 30th you could do worse than pop over and bag yourself a bargain.

On the subject of Liberty, I wrote a previous blog about their history and an exhibition at the Fashion & Textiles museum that I visited, you can read it here

Until next time,

Happy Sewing

Sue

Here be dragons!

At last year’s Sewing Weekender I picked up an interesting piece of fabric from the swap table. It was about 1m80 of printed cotton by Alexander Henry, a design called Tatsu and featuring Chinese-style dragons and printed in shades of grey and black with red. It’s not my usual colours or style but something about it appealed to me so I kept it. Thank you whoever donated it!IMG_3517

Initially I thought I’d make a kimono top with it but I realised that the placement of the dragons was such that I’d struggle to cut one out of the small quantity I had, not because there wasn’t enough but simply because I wouldn’t be able to get the dragons to match and look balanced-I didn’t want wonky dragons! So even though I’d washed it ready it languished in my stash for a year, although I did get it out several times to consider a dirndl skirt. Again it was the issue of having the dragons running around the skirt properly and not wonky. Incidentally, a dirndl is the name for a simple gathered or pleated skirt which is purely widths of fabric stitched together along the selvedges and sewn at the top to a waistband and hemmed at the bottom, it doesn’t have any shaping at all.

In the end I took the bull by the horns and worked out where the dragons would be on the front and, having bravely cut that piece, I was able to cut the back so that the two pieces matched at the side seams. In order for there to be a good pattern-match down each side seam there was a wider than usual seam allowance..

fullsizeoutput_1db9
I didn’t trim off the excess simply because it was the selvedge and therefore neat anyway.

I needed to insert an invisible zip into the other side seam  which taxed my brain and my sewing skills a bit but I was extremely pleased with the result-I didn’t even have to unpick anything, it was right first time!! Get in!

IMG_3519
This is the zip after I’d attached the waistband, there’s a large hook and bar under the overlap which I like better than a button and buttonhole.

I made a fairly narrow waistband which I stiffened with iron-on interfacing and then pleated the skirt onto it. I wanted the fabric to lay fairly flat as I’ve got a bit of a tummy these days (sad face) and bulky gathers would be very unflattering. I didn’t use any particular mathematical calculations to achieve this, I just folded and fiddled until I was happy with the look.

Because some of the dragon’s faces are quite close to the bottom edge I decided to hem it with  bias binding for a neat finish without losing any of the design.

IMG_3521
The added benefit of slip-hemming meant there is no visible stitching showing on the right side.

So there it is, a simple dirndl skirt using just 2 widths of fabric. It’s one of the simplest sorts of skirt you can make and works well for any length. Depending on the type of fabric you may need more widths to make the skirt look good though. For example, if you want to use chiffon or georgette, which are quite fine, you’d almost certainly need 3, 4 or even more widths of fabric to make it look effective and not to ‘skimped’, Conversely, thicker fabrics will need less if they aren’t going to be unflatteringly bulky. I didn’t bother lining this skirt although I often do. If you don’t need to consider extreme pattern-matching this is a super-quick skirt to make and you can gussy it up with pockets, trims, exposed zips, whatever, to make it individual. Take a look at my previous blog with the tie waist here if you want another variation.

Just a short blog this time, lots to get on with…

Happy Sewing,

Sue