Trying out a new Simplicity patterns PDF

Simplicity have long been one of the most familiar big names in the home sewing paper patterns market but many of us are now choosing to use PDF patterns instead for a variety of reasons. Simplicity have recently decided to dip a toe into the waters and release a small collection of patterns as PDFs for the first time.

I was first invited to try one of this new range of PDF patterns way back in high summer but for a variety of reasons it’s taken until mid-October to get completed. 

Simplicity have released a range of ten basics which are available now from Sew Direct including several tops, a skirt, a dress and a jumpsuit, plus two children’s patterns and a free clutch bag pattern. 

I chose the tie-front robe jacket SP110 which appealed to me as a cover-up in place of a cardi or sweatshirt and, because it was July at the time, I picked a pretty, drapey Atelier Brunette viscose crepe in a pale ivory print kindly provided by Minerva. The robe jacket is a very simple silhouette with a wide grown-on 3/4 length sleeve, the neck is finished with a band and the tie waist is elasticated across the back.

For me, it depends how many pages a PDF has whether I print it myself or send it away (my usual cut-off is anything over 30 sheets, more than that and I’m not keen on the printing and assembling) However, we had been experiencing postal strikes here in the UK and I needed to get started so I printed at home this time. I think the paper in my printer was a bit out of alignment because not all the pages were printing as accurately as they should have been but fortunately I could see what had gone adrift as I assembled the pages and was able to rectify it. Make sure you print the test page and check carefully that all borders are present and accurate, don’t simply check the test square measurement and wander off into another room while it’s all printing out… With A0 printing this shouldn’t be an issue.

The pattern includes all sizes from UK6 to UK26 (up to 48” bust) which are broken down into two size bands (there isn’t a layering option to isolate which sizes you choose to print unfortunately) The robe jacket consists of just six simple pattern pieces.

The instructions sheet/booklet design is attractive and uncluttered with clear diagrams and straightforward step by step instructions. For the more novice sewer there is a glossary which includes all the sewing terms that will be used throughout, and a page explaining pattern markings. This being a US-originated pattern, all the seam allowances are only in inches so you may want to write your own metric equivalents on the page somewhere before you start, to avoid confusion. 

snipping the curved underarm seam means it sits more smoothly without puckering when it’s turned through

pulling up the gathering stitches

turning through the front ties using my old school ruler!

I joined two pieces of elastic using the 3-step ‘elastic’ stitch on my machine.

two different methods of pulling the elastic through, either using a bodkin or using a safety pin with a piece of masking tape to prevent it from opening accidentally inside the channel.

All finished

This is a quick and easy make, not much more than half a day probably, and everything comes together well. I thought the instructions and diagrams were clear, well explained and thorough without being over-complex. Overall a relative beginner should be able to manage this pattern. I like to print my instructions in booklet form but I should have increased the font size a little as I struggled occasionally to see the diagrams. I think the diagrams are actually very good, I simply didn’t print them large enough. If you are reading them from a tablet or lap top then this isn’t so likely to be an issue.

My only ‘problem’ now is that I have a summer garment as we head into autumn/winter. I intended it to be a light cover over summer dresses and tops so I’ve tried to style it for the season as it is now. I made a UK14 but possibly should have gone up a size, I feel self-conscious about how it looks around my midriff. It falls exactly on my natural waistline (I’m 5’5” tall) rather than above it like the models who are probably 5’8”-5’10” minimum. Hey ho, I didn’t get the tall gene but I did get the yoyo weight one instead! Basically, I’m pleased with the garment overall but less pleased with how it looks on me just now. I’m determined to get use out of it though but it will probably not be much before next spring. 

Wearing it with Vogue Marcy Tilton #8499

and with a newly finished pair of wide-legged Eve trousers by Merchant and Mills

And finally with my recent Nina Lee Portobello trousers and a vintage shirt pattern from around 1978!

I have a small quantity of the fabric left so, if there’s enough, I may consider adding it to the bottom under the waistband. This shouldn’t be too difficult because the waistband is straight and it would then give a little peplum which I might feel more comfortable with. It wouldn’t be too difficult to add a longer skirt to turn it into a coat as an alternative.

Being a PDF means you can buy the pattern to use immediately, and all the others in the Simplicity PDF range from Sew Direct. I was paid a modest fee for my pattern review and generously provided with the fabric to make it from Minerva. All views expressed are of course my own. 

Until next time, happy sewing

Sue

The Maker’s Atelier asymmetric gather dress

In the summer of 2021 Simply Sewing magazine invited me to choose an Indie brand pattern to sew and review for them. After some deliberation I settled on the Maker’s Atelier Asymmetric Gather dress which they generously provided me with free of charge. The article was published a year ago now but if you didn’t see it then I’m sharing some of my thoughts about the pattern here.

I like Maker’s Atelier patterns because they are deceptively simple to look at but many of them have stylish details such as notched hems, interesting seam lines, button-up backs or gathered sections which can elevate the garment out of the ordinary. On their website, and also in their newsletter, they always illustrate how much variety you can create from reusing a single pattern simply by sewing it in different fabric-types. I’ve made numerous iterations of their Holiday Shirt and Top using a number of different fabrics and embellishments for example.

If you’ve seen my various makes of Trend Patterns you’ll already know I’m rather fond of an asymmetric style and although the Maker’s Atelier one is a simple cocoon-shaped shift dress the gathered features really lift it out of the ordinary.

Because the front pattern piece is cut as a whole ‘right side up’ by flipping the piece over you can have the gathered neckline to the right or left depending on your preference. I love how the back is given shape and definition by adding the wide elastic at waist level too. 

I made this first version in gingko-printed crepe fabric bought at least four years ago from Fabrics Galore.

The style works best using a fabric that gathers softly and has some drape which is why the viscose twill kindly given to me by Sew Me Sunshine worked well. I wanted a fabric with a little bit of weight to it so that the elastication looked right, a stiff fabric without any fluidity would not flow nicely over the contours of the body. I really wanted a design that would look interesting whether it was gathered or not. This particular fabric from Mind the Maker contains 100% LENZING™ ECOVERO™ Viscose, which is a sustainably certified viscose fibre by LENZING™ with minimal environmental impact in the production process (compared to production of traditional viscose fibres). Some fibre and fabric production methods can be very damaging to the environment and the work force so this is at least a step in the right direction.

It was very satisfying to see the shape come together once I’d inserted the elastic, I know it probably sounds odd but I do love a bit of understitching on a facing. However I’ve found the back neck facing keeps creeping up though so I need to find a way to fix that.

Viscose often shifts around quite a lot so it’s important to not pull or drag it too much while you’re laying it up so that your pieces aren’t distorted once you’ve cut them out. If you have to cut on a table which isn’t quite big enough make sure the overhanging fabric is at least supported on a chair to prevent it pulling the fabric on the table out of shape. If you can manage to cut on the floor that would probably be preferable. Thankfully there aren’t many pattern pieces though so it isn’t a complex lay-plan.

My measurements at the time fell between a UK 12 and 14 so I measured the front and back pattern pieces to work out what the finished bust and hip sizes would be, from these I opted to sew a UK12. I was happy with the final fit, there’s just enough fullness without becoming too voluminous and baggy. I’m 5’5” tall and a little ‘pear-shaped’ but this style would suit a variety of body shapes because it skims over the waist and thigh area, it isn’t a ‘fitted’ style. The elasticated sections on the hip and back give the slightly-cocoon shape some definition and this could be adjusted to your personal preference. I’ve gained few pounds since I last summer but the dress still looks okay I think.

At Eltham Palace in south London, summer 2021

The one major adjustment I made was to shorten the pattern by 5cms before cutting out. I read a few online reviews before I started which all said they wish they had, or they did, make it shorter. I’m happy with how the finished length looks on me, it would definitely not have looked right if I’d left it as it was. I took the 5cms out horizontally across the front and back just below the hip/knee area, not from the hem. If you shorten it from the hem you will make the shape at the bottom a little wider which might result in it losing a little of its ‘peg’ shaping. The only other thing I did was to slightly raise the position of the elastic channels on the back and hip by approximately 1.5cms so that proportionately they sit a little higher on me, I think it looks better. 

An easy hack would be to use a narrower elastic than suggested, or sew two or more rows of narrower elastic into channels, you could even use shirring elastic. Instead of elastication how about slotting ribbon or tape through the channels, sew buttonholes for the tape and leave the ends dangling so that they are decorative and adjustable, perhaps finish the ends with small toggles to make a feature of them? Leave the sleeves off completely maybe or turn them into full-length sleeves with elasticated cuffs, or a cap sleeve. If you’re feeling adventurous you could even elasticate the hem! What about having fun playing with the grain line, especially if you use a check or striped fabric. There aren’t any pockets so you could add at least one in-seam pocket, probably on the non-elasticated side seam.

As well as viscose-types like I’ve used you could also choose fabrics such as handkerchief or washed linens, crepe, softer types of satin, crepe de Chine, challis and wool crepe. Softer cottons like lawn or chambray-types would all work well too. You don’t want anything overly stiff or thick because you wouldn’t get the lovely definition to the elasticated folds, they could become a bit clunky. Ideally avoid fabrics which crease badly if you might be sitting in it for any length of time, creases would spoil the look of the front. 

I chose to trace off the pattern, I find I’m doing this more and more often even though I’m not a big fan of doing so. Take your time if you’re tracing the pattern, transfer all the markings accurately. Because the neckline is asymmetric make sure you cut the neck facing to match and double check you have a mirrored any pieces that are a pair before cutting into your fabric. Read through all the making instructions before you start and highlight any areas that you think are, or might be, trickier for you. 

The Asymmetric Gather dress isn’t a difficult garment to sew up, I would say anyone from an adventurous beginner upwards would enjoy making it. It certainly took me less than a day to make, especially as there are no openings like zips or buttons to construct. 

I’ve found it entertaining to see my changing hairstyle since I first made this! I was paid for the original article last year but all thoughts, advice and opinions are my own.

until next time

Happy sewing

Sue

Italian cloth and hacking a ‘vintage’ pattern

First a bit of preamble, because the origins of the fabric I used for this top were important. In June 2022 me and Mr Y were finally able to return to mainland Europe again for a four day stay in Florence, one of my favourite cities. We knew it would probably be very busy with visitors during the summer but frankly I didn’t care about this, I was just so happy to be able to see all those magnificent buildings and beautiful art again.

In between looking at the art and strolling the ancient streets I indulged in a little window shopping at the stores where I can afford literally nothing, including Alexander McQueen, Missoni and Gucci.

I could get a closer look at the details in the Gucci store that is based in the Gucci exhibition (worth a visit)

Missoni….obviously, look at that extraordinary panelled dress

Alexander McQueen…be still my beating heart

Amongst all these shops though I *may* have come across a fabric emporium….In truth, there are quite a number of fabric shops in Florence, what with this being Italy and home of fabulous quality textiles.

I failed to make a note of the name of this particular shop but it was very close to the Duomo and the Baptistry. I didn’t go in (thankfully it was shut at the time!) but they clearly specialised in very high-end alta moda fabrics which were nowhere near my budget!

Stunning beaded silk cloth

I had, however, been given the name of another more accessible shop by a kind Instagram follower so we set off to find it with only the vaguest idea where it was. Bacci Tessuti is quite close to the Medici Chapel and San Lorenzo and, with a little help from Google Maps, we found it eventually.

The air-conditioned shop was a very welcome haven from the extreme heat Florence was experiencing during our visit and I was not disappointed by what I found, there is a wonderful selection of lovely cloth to browse.

The choices in a beautiful store like this can be quite overwhelming so I had a sort-of plan to buy something which felt ‘Italian’ to me. I set out looking at their fine linen, personally I would call it handkerchief linen and it’s much lighter and softer than most of the heavier and more durable linens I’ve seen on sale in the UK. I homed in on one with a large design in blue, red and pink flowers (I love a floral fabric but I don’t often wear it) but this one ’spoke’ to me. So that was great but then the helpful shop manager, who spoke excellent English, pointed out the Liberty Tana lawn he had at a very good price! I would have resisted but my husband wanted to buy some for me so who am I to turn him down!

These were going to be my total purchases but when I went over to the counter the manager told me that the linen cloth was by the textile designer for well-known Italian brand, Pucci. At this point he produced from under the counter several short length pieces of some beautiful Italian designer fabrics including Dolce and Gabbana! They were all very lovely (and still expensive) but I wouldn’t have a use for them. The one I did fall for though was a small piece of silk/cotton cloth from Pucci with their trademark psychedelic design in delicate ice cream shades. It still wasn’t cheap but it was just a bit different and there was enough to make a top of some kind. So of course it came home with me…

it’s a bit crumpled from the wash after I got it home

The linen is on the left, plus the two pieces of Tana lawn bought by my husband, and that was my view from the hotel in the background, straight over the Arno with the Ponte Vecchio just to the left.

With my purchases safely stowed away we got on with enjoying the rest of our holiday (although I spent a fair bit of time planning in my head what I was going to make when we got home!)

Initially I was going to use this ‘vintage’ Style pattern as is (I bought it new in 1988 so it’s a little upsetting to think of it as vintage!) I used it several times back in the day, and I’ve sewn it again a couple of times in the last few years. The back buttons are the feature I like, the rest is basically a woven T-shirt.

As I said earlier, I had no more than 1m30 of fabric to play with and I still wanted to do a decent job of matching the print as best I could. The basic pattern fitted on the fabric, it’s only a front, back, sleeves and facings, but I thought it might look a bit meh, and there would still be some wastage. After a bit of a rethink, by shortening the body and making two deep ruffles across the width of the fabric I knew I would get a much more interesting design and have very little wastage in the end.

Basically it was a case of working out how long I could afford to make the top section and still get ruffles that were a balanced length [I had the Merchant and Mills Florence top in my head as inspiration] I took a line horizontally straight across to the centre front/back from the side seam approximately 15cms down from the bottom of the arm scye of both the front and back. What I should have done if I had stopped to think about it was make the centre front longer, I didn’t though and as a result the front hem lifts up because of my bust. The back is fine though.

The first dashed line is roughly where I folded out the pattern to make the horizontal seam, the curved dashed line on the front is how I should have shaped it.

I was able to cut the front and back pieces side by side on the folded cloth which meant the design ran smoothly around the garment. From the remaining fabric I calculated how deep two full widths of the fabric could be (approximately 28cms each strip) and still have enough to get two sleeves and the neck facings out too.

Once I had all the pieces it was just a case of assembling. First I did my usual scavenge through my button boxes to find enough suitable colours in matching sizes. After joining the shoulder seams and attaching the neck and back facings I sewed all the buttonholes at this stage, by doing this first it meant I wasn’t fighting the bulky seam of the gathered ‘skirt’ later.

My usual mash-up of various buttons down the back

By sewing the buttonholes at an early stage meant I didn’t have to struggle getting the bottom one under the buttonhole foot with the gathering in the way.

All finished. I know I’m just being fussy but you can probably see what I mean about the top rising up at the front slightly. There is no bust dart on the pattern which would have made a difference.

I’m pleased with how the top uses almost all the fabric and shows off the print to good effect, I didn’t want to chop it up unnecessarily and there weren’t many options with the small quantity I had anyway. I had to use a very narrow pin hem on the ruffle to maximise the length, the sleeves had their normal hem allowance on them. If you want a few more ideas for finishing hems I wrote this blog a couple of years ago which you might find useful.

I opted to have the ruffle run straight across the back rather than have an opening (this was because I was being lazy and didn’t want to make a facing and sew more buttonholes!!)

The top is shorter than I’ve worn in the recent past but I like the look, especially with the flat-fronted Eve pants by Merchant and Mills

Out in the wild at Africa Fashion which is on at the Victoria and Albert Museum in London until 16/4/23

As for the other Italian fabrics, I have plans to make a shirt dress with the beautiful linen, I have a design I’ve drafted and sewn a couple of versions of but there’s probably still a few tweaks I want to make to it before making it in the ‘real thing’. The Liberty lawn is waiting for the right project to present itself too, no need to rush these things. I’m all for sewing the good stuff but it’s really upsetting if you sew a dud with it!

Until next time, happy sewing

Sue

Tips for sewing with linen jersey, a new Lamazi post

Did you know that linen jersey was even a thing? It’s an unusual fabric which you don’t see often, we all know knits are available in most other fibre types-cotton, wool, silk or man-mades for example- but I’ve never worked with it before so when Liana invited me to sew my next Lamazi project using it, and to pass on any hints and tips for sewing it, I was up for the challenge. 

This 100% linen jersey comes from Mind the Maker in a range of colours and I picked the Dry Mustard shade which is a lovely vibrant ochre. The fabric has a beautiful lustrous sheen on the right side, the reverse is duller so it makes it much easier to tell the difference between the two. It has lovely light drapey quality too and is slightly sheer.

Linen fabric is not a textile known for its inherent stretch qualities and this jersey does feel slightly different from other knits because it has only a small amount of stretch along its length and quite a lot of stretch across the width but it has very little recovery so once it’s been stretched out it will stay like that at least until it’s washed again. During construction the application of plenty of steam will encourage some of this accidental stretching to be eased back into position so, coupled with its sheerness, this means that you need to think carefully about what garment to sew with it. 

Plenty of steam will help remove most unwanted bagginess like this

The properties of linen fabric itself [cool in warm weather, warm in cold weather] mean that it would be ideal for loose-fitting leisure or exercise wear, for yoga or Pilates for example. I would definitely say it’s better to avoid anything that is particularly close fitting because areas like the elbows or wrists would become stretched or baggy with little recovery. However the fabric has a lovely drape and its fine gauge allows it to be gathered up successfully so these properties could be exploited instead.

Bearing all these factors in mind I decided to make (another) Sewing Revival Heron dress which I would hack into a blouse. The pattern has a neckline which is gathered using elastic along with raglan sleeves with deep elasticated cuffs. To mix it up further I decided to pull the hemline in onto elastic rather than have a wide smock silhouette.

First things first, I washed the fabric by hand to remove any risk of excessive shrinkage or twisting in the machine. If you want to wash it in the machine then it might be an idea to overlock the cut ends together first to form a long loop and place it into a large washing bag to protect it further. Alternatively you could press it on your ironing board with plenty of steam instead. If at all possible it is better to dry the fabric flat, and certainly don’t wring or twist it. All of this might sound off-putting, and it is clearly not as straightforward as chucking a nice stable cotton into the machine but this is a luxurious fabric and deserves to be treated and handled carefully in the preparation. When it comes to cutting out your pattern pieces lay the fabric as flat as possible, handle it gently and don’t pull it about too much, especially if you decide to fold it. I made a whole back pattern piece for my top so that I could cut it flat, another appeal of the Heron pattern for me is that it has just three pieces so it’s a relatively quick sew usually. 

After cutting all the pieces the first thing I did was stabilise all the raglan shoulder seams using some iron-on seam tape, I did this to prevent any unwanted stretching before I sewed the sleeves in later on. I added small squares of iron-on interfacing to reinforce the bottom of the opening on the centre front seam too. I also decided to press all the folded parts of the casings/ruffles for the neckline, sleeves and hem before sewing anything together, just so that I was handling the cut-out pieces as little as possible, again to prevent unwanted stretching before they got joined together. I also tacked these folded parts into position temporarily. All this might sound excessive but I wasn’t in a rush, and I found the slow and considered processes very soothing at quite a difficult time. 

iron-on stay tape to prevent unwanted stretching of the raglan seams

• 

  the pinned raglan seams showing the slight excess to be absorbed

• 

  the finished seams inside the garment

I pressed and tacked casing/ruffles before joining the sections together later on

reinforcing the bottom of the neck opening with small squares of iron-on interfacing.

Something else I did before commencing was check on fabric scraps which needle and stitch-type would give me the best results. A ballpoint needle suitable for stretch/knits/jersey is essential to prevent snagging which could lead to laddering of this delicate fabric, and I found a short straight stitch was better than a narrow zigzag but you must do what works best on your own machine. You could sew a garment together entirely on an overlocker but be aware of the lack of rebound this fabric has so if it gets stretched or misshapen while it’s being sewn then it’s probably like that permanently. I also tested the overlocker finish before diving in for the same reasons. If you don’t have an overlocker this fabric is fine enough that where possible you could probably sew self-neatening French seams, or a wide zigzag might work but just be careful it doesn’t chew up the edges. If you have an overlock stitch option on your sewing machine and/or a special foot to sew an overlock-style stitch then definitely use them. Test all options before making your choice, the time taken could save you upsets later on. I slipped some folded strips of paper underneath the seam allowances when I pressed them to minimise any chance of the seam showing through on the front

testing stitches and overlocking

I popped two strips of folded paper under the centre front seam while I pressed it so that there was no show-through or unwanted shininess on the right side.

If you have a walking foot for your machine this is definitely a fabric worth using it for, even if you don’t it’s a good idea to use plenty of pins. I’m not a fan of mini-clips because I think they are too heavy and get in the way, this fabric is lightweight and I think mini-clips could distort it while you’re sewing but it’s up to you. Tacking seams is always an option too of course, any technique that prevents the fabric shifting while you sew basically.

If you’ve followed my blog for a while you’ll know I’ve made a few Herons before so the construction was straightforward, the only area I did differently was to create the ruffled hem with a wide elastic casing. I couldn’t decide between my planned 2cms or 1cm wide elastic initially so I tested with the two widths to see which I preferred-I chose to stay with the 2cms width as planned. 

testing which elastic width I preferred for the hem, this was the narrow one (the fabric scrap is wrong side out!)

and this is wider width, it’s the one I used at the hem in the end.

using a bodkin to insert the narrow elastic in the neck casing.

checking the gathered neckline on the stand

I used this quilting attachment on my machine so that I sewed an accurate parallel width for the elastic casing

close up of the elasticated hem casing

To sum up, I’m really pleased with how my first experience of sewing with linen jersey has gone, I’ll admit I was a little nervous because Liana was putting her trust in me with an expensive fabric but taking the time to plan and test, and use my existing knowledge of working with knits definitely helped. Because of the sheerness of the fabric Lamazi also provided me with a metre of Atelier Brunette crepe viscose in Ochre to make a camisole to wear underneath, I used the Simone camisole and trousers pattern by Maven which is a very quick make and a very useful garment to wear on its own or underneath other garments. The crepe viscose is a beautiful quality fabric with lovely handle and drape but be aware that there’s a disappointing amount of creasing, you might want to take that into account when planning, for example if you’re making something you’ll spend a lot of time sitting in.

all finished

As always, I hope you find my hints and tips helpful if you choose this lovely fabric, I wouldn’t recommend it to a novice sewer because some experience of sewing with other similar fabrics is definitely an advantage, plus it would be shame to end up with a costly mistake, but if you’re looking for a new challenge to add to your repertoire this could be a good start. I’ll launder the finished garment either by hand or in a wash bag on a gentle cycle in the machine. I’ll dry it flat too and store it that way, I don’t want a coat hanger to make it misshapen. If you’re a person who prefers not to worry too much about their clothes or their maintenance then this might strike you as overkill, and that’s fair enough, but I don’t think it hurts to have a few special things in our wardrobes which were worth the effort to make for ourselves. 

I’m looking forward to wearing this top as autumn is fast approaching (did summer ever arrive!?) thank you to Lamazi for providing me with the fabric to review.

Until next time, happy sewing,

Sue

The Sewing Revival Heron dress hack

Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…

wearing the blouse on my trip to Paris for the Sewcial in May 2019

my very first version of the Heron dress…it has pockets!

While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.

All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.

Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.

Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.

I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.

And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.

• 

  It got an outing without the belt before lockdown started last spring, it looked a bit too sack-like though

• 

  By the time it was ‘seasonally appropriate’ again last autumn I tried it with belt and much prefer it.

I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.

I grabbed a cheeky selfie in John Lewis with my sewing friend Ruth in the autumn, we can only dream of when we can meet up again at the moment though sadly. that’s my upcycled jeans jacket I’m wearing

The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?

Until next time, happy sewing

Sue

My second Lamazi blog post

Much as I’m a big fan of sewing and wearing dresses, I do love separates too, especially tops. I think this version of the Amaya shirt by Made My Wardrobe may just have gone to the top of my favourites list! [Full disclosure, Lydia offered me my choice of one of her patterns as a PDF with no expectation of a review and I selected the Amaya with its gathered neckline, raglan sleeves and full floaty cuffs] I printed it off but then didn’t start it for a while until the ‘right’ fabric came along.

As a Lamazi Fabrics blogger we each volunteer for a number of slots throughout the year but Liana was short of a post for early August so I offered to do it. I thought the Amaya would be a good option as it’s not complex and I could probably sew it quite quickly to meet the deadline. When my eyes fell on the beautiful printed Broderie Anglaise I knew I had my perfect match! 

When the fabric arrived it was absolutely gorgeous, so soft and pliable. Broderie Anglaise can often be quite stiff and crisp, which may be what you want, but I’ve also found it to be a disguise for a cheaper quality cotton fabric with lots of dressing or starch in it so do be slightly wary of very cheap Broderie Anglaise. This version is a printed soft cotton lawn which is then embroidered, there are lots of eyelets so personally I’ll probably be wearing a plain-coloured RTW camisole underneath as no one needs to see my undies or midriff thank you! This specific fabric does not have an embroidered edge which some Broderie Anglaise does, and also be aware that the embroidered part of the fabric doesn’t run right up to the selvedge, this is normal with this type of fabric. On this particular fabric there’s a wider gap down one side than the other so you may find the useable part of the fabric isn’t as wide as you would think. In other words, don’t scrimp on the quantity of fabric when choosing Broderie Anglaise for a project because you could find yourself a bit short by accident.

I opted for a UK size 14 with no modifications according to my measurements but I think I will go down a size when I make another, the fabric you choose could make a significant difference to the finished look so a soft and floaty georgette or silk crepe de chine for example would look divine with plenty of volume but a firm linen, or a cotton poplin could give you the appearance of a ship in full sail! (that may, of course, be the look you’re after!) 

This fabric has a one-way design but I chose to turn the upper sleeve pattern piece to interlock better and make it more economical to cut out, I really don’t think it’s that obvious on the finished garment, always worth checking though! 

It’s pretty well impossible to see snipped notches or even triangles on this fabric so, in order to tell the front of the sleeve from the back, I marked the single and double notches with long thread tacks and this seemed to work well.

• 

• 

I used a French seam finish on the cuffs but found there wasn’t any particular advantage to doing this, for the rest of the construction I sewed regular seams and overlocked them together. 

The pattern calls for interfacing to be attached down the centre front seam to stabilise it but I chose not to do this as it would show through the eyelets, I simply neatened the edge of the self-facing with the overlocker. I had a rummage through lots of the miscellaneous trims and ribbons I’ve had from past projects and tried a few ideas out with them but in the end I only used a white cotton trim down the front and simple edging lace on the sleeves, I would have used this on the hem too but there wasn’t enough, more on that later. 

I added a triple zigzag stitch to embellish the sleeve ruffle seam too.

The neckline is gathered up into a bias-cut band but instead of cutting it on the bias I used a straight strip of the printed lawn from near the selvedge. I did this because a bias strip of such holey fabric wouldn’t have worked well at all, the one drawback of the tie being cut on the straight is that it doesn’t curve around the neckline quite so smoothly but it’s fine. The tie is topstitched close to the edge so, to match the sleeve, I used the triple zigzag stitch again. 

Finally I had to finish the hem, I could simply have turned up as per the instructions but I wanted some kind of pretty finish to echo the cuffs. As I didn’t have enough of the sleeve trimming, or any other edging lace which I felt worked alongside what I’d already used, I opted to try out one of the satin stitches which my Pfaff machine is capable of. 

I’d never tried this before so I did a couple of experimental tests with a few stitch designs that appealed to me, I used Vilene Stitch N Tear as a backing behind it to stabilise the fabric.

This seemed to be satisfactory so I sewed the whole hem by this method a few millimetres away from the edge. The Stitch N Tear is then carefully torn away to leave the actual embroidery and then finally, as accurately as possible, I snipped away the excess fabric to leave the pretty scalloped edge.

I’m very happy with this finish on the hem BUT it’s just possible that it might not be very durable in the wash, I’m half-expecting that it might start to come away in places. If this happens then I’ll have come up with another idea but for the moment it looks nice. 

I hope you’ve found my tips for working with Broderie Anglaise helpful, and things to look out for with it. It’s certainly a fabric that is having a ‘moment’ at the moment, it’s timeless and feminine and I’m looking forward to wearing my Amaya for a few years to come. 

• 

Thank you as always to Lamazi for providing me with the fabric to be able to write this, and thank you to Lydia at Made My Wardrobe for generously giving me the pattern. 

Until next time,

Happy sewing

Sue

Revisiting a ‘vintage’ blouse pattern

I know many of us often sew patterns multiple times because we like them but I’ve taken this to a new extreme recently. I last sewed this blouse pattern Simplicity 8704 when I was around 16 or 17 years old, the date on the back is 1978 so I must have made it while I was still at school! I remember I used a burgundy-coloured viscose (or similar) with a floral print on it and it was definitely one of my favourites as I wore it a lot, probably swanning about in the Sixth Form common room!

There have been several times when I’ve been tempted to revisit it but for one reason or another I’ve put it back in the box for another day but this time I kept it out and went in search of fabric in the stash. Initially I was going to use a really pretty pastel pink lightweight checked cotton I got from Sew Me Sunshine (I can’t see it on the website now though) but when I realised I was going to have to pattern match the deceptively tricky check I thought better of it. I wasn’t in the mood for taking an age over that so I continued to rummage until my eyes fell upon the (also) pale pink linen I acquired from the local Scraps Store last year. I found it in a container full of various unwanted fabrics and there was nearly 5 metres of it so, for a donation, it came home with me! I laundered it at the time but put it away. I thought I might make a dress with it originally but, because it’s such a pale pink, I didn’t want to end up looking like a blob so I left it for another time.

A plain linen blouse appealed to me though and I didn’t have to fiddle about pattern matching so away I went and it was cut out in no time. Even though the pattern was a single size-this is how most patterns were sold until multi-size patterns were introduced-and my size has fluctuated to say the least over the years, amazingly it was still going to be the right size with no alterations.

There’s not much else to say about making it up except I remembered that an @SewOver50 stalwart, Lisa, had shared on her grid the day before that she had used a wing needle to decorate a plain linen tunic she was making which reminded me that I’d intended to find a use for the same effect at some point but forgotten all about it-Thank You Lisa!

The wing needle (I’ve also seen it called an ‘heirloom’ needle recently too) is like a regular needle except it has fine metal ‘fins’ to each side of the shaft which creates a little hole like a tiny eyelet in the centre of the stitch as it forms. A stitch which looks like a little star works best for this effect but you could try experimenting to see if any others look nice

I made a little video of my machine in action.

It’s worth bearing in mind a couple of important points if you’re going to use this decoration. Firstly, you can’t easily pivot at a corner with the needle down in the work-I sewed the collar in three separate moves, secondly you won’t be able to use the automatic threader if your machine has one and thirdly (thank you Lisa for telling me this because I don’t have this feature) you can’t use your automatic thread cutter if you have one.

As well as the collar I embroidered the cuffs, the front raglan seams and down the button placket, although I did this last one after I’d hemmed the bottom and sewn the buttonholes so that it was the exact distance from the edge and the buttonholes.

I love the way the blouse gathers into the collar, which is a two part construction incidentally, the raglan sleeves are straightforward but the gathered cuffs add a nice touch. I found a selection of Mother of Pearl buttons amongst my tidied-up button boxes to add another of my usual quirky details but otherwise that’s it. It’s a reasonably quick make but it was lovely to sew the details of collar construction and the cuffs, there’s an elegant simplicity to it I think. I will either wear it loose over the top of trousers or tucked in, or underneath a pinafore dress maybe?

It might sound strange but it feels a bit like an old friend has come back to visit, and I might even make the placket front version now too!

Until next time, keep sewing!

Sue

Testing the Regatta dress from Alice & Co

Alice & Co are a pattern company run by the mother-and-daughter team of designer, pattern cutter and sewing teacher Alice, and Lilia, who is a museum textile conservator for her ‘day job’. I saw they were requesting new testers for one of their latest patterns and, as I generally enjoy the process of testing and I’m happy to give my time to assist small indie companies when possible, I was pleased to be invited to help.

The Regatta is a summer dress featuring a neckline which pulls up with ribbon to tie on the shoulders, a gathered or pleated waist, patch pockets and a button-back closure.

I had some printed viscose fabric in my stash which my good friend Claire had given me a few months back and I was sure it would be ideal for this test version of Regatta. I think the dress will be great made in a wide variety of fabrics including chambray, cotton poplin, madras cotton check, seersucker or shirting, as well as eyelet or broderie anglaise, washed linen…I could go on!

This is a PDF pattern but unlike many which provide you with ALL the pattern pieces you might require, because of the simplicity of the skirt it only gives you pieces for front and back bodice plus a patch pocket. It needs a total of 8 pages printed in colour rather a selection of dotted/dashed lines. The skirt is merely three rectangles (front and two backs) so rather than waste paper it gives you guidelines to follow for cutting the skirt pieces ‘freehand’. This isn’t as daunting as it might sound, I used the full width of the fabric cut to my chosen length PLUS a hem and a top seam allowance and then the same again but cut into two equal pieces to form the backs.

The instruction booklet is written in a nice friendly chatty style which feels both informative and encouraging, I think the illustrations are well-drawn and clear too. I printed mine out in booklet format which is a good option if your printer will allow it, 3 pages printed on both sides which fold neatly into A5.

I opted to cut a size 16 according to my measurements from the chart but I would definitely come down at least a size for the next one. As the bodice needs to be lined anyway you could make up the lining as a toile to see if you need to make any adjustments and then use it in the dress. Depending on your fabric you could self-line it or, as I did, use a plain cotton. I also decided at this stage that I would line the skirt because my fabric is a bit sheer, plus it’s a floaty skirt so I don’t want any knicker-revealing moments on windy days!! [I made a simple A-line lining, not the full pleated skirt which would have been awfully bulky]

The bodice construction is simple [if you don’t like darts you won’t be a fan though, you’ll need to make 8!]

Follow the instructions carefully for the ribbon channel openings, the diagrams will help if you’re not sure. Take care inserting the ribbons pieces at the back-cut the ribbon into one long piece for the front and two shorter pieces for the backs. You could possibly use wide elastic for this element instead if you want a different look, or make a self-fabric strip or what about using a vintage scarf even?

Once you’ve joined the outer fabric and linings together along the neck edges and armholes you’ll also need to understitch here as much as possible, to give it a nice crisp edge and stop it rolling. Just go carefully so as not to catch the fabric accidentally-you won’t be able to sew everything because it will be inaccessible in places. 

Next, when you sew the actual channels that the ribbons sit in, it might be wise to tack in position first, certainly mark the lines in some way-chalk, pencil, erasable marker-or if you have a quilting guide attachment for your machine use that. It looks like a piece of bent metal which slots in behind the foot of your machine. You can see it better in the photo although this was a different project. This enables you to follow a stitching line which is considerably further away than your usual seam allowance markings on the needle plate will allow. You’ll need to be most careful sewing the back channels because the ribbon is already in position so don’t sew through it by accident, it won’t gather up. Slot the ribbon through the front when you’ve sewn the front channel, or leave it until you’re ready to try the dress on and adjust the bows to your taste at the end.

using the quilting guide attachment to follow a wider width [this was on the Heron dress]

Making up the skirt is simple enough, don’t forget to interface the button-stand areas for stability. The pockets are positioned over the side seams but they could go directly on the front if you prefer.

I opted to use pleats on the skirt because I prefer how they look on me to gathers. I don’t have any sage advice or foolproof mathematical equation for working this out I’m afraid, I just pinned the skirt to the bodice at the side seams, CF and CB button-stand and then fiddled until I was happy with the pleats before stitching it on. There were lots of pins involved!  

lots of pins holding the pleats in position ready to sew.

If you aren’t lining the skirt then you can simply slip stitch the lining in place by hand as per the instructions. As I was lining the skirt too I cut, sewed and hemmed a simple A-line shape in plain cotton which I stitched to the bottom of the bodice lining, obviously it must have the gap at the back for the button opening. I simply caught this down behind the button-stand with a few hand stitches so it doesn’t flap about. So that it doesn’t ride up inside the dress I hand-sewed a few stitches at the side seams and CF where the seams meet to anchor them together loosely.

The lining looks like this inside, it doesn’t need to be the full length of the skirt although it could be if you want.

I used a nice deep hem of 5cms to give the skirt weight. I overlocked the edge and then used the blindhem stitch and foot to sew it up. As the hem is straight you could face it instead with bias binding or ribbon, or a contrast fabric for a different look, either machine top stitch or slip-hem in place by hand. The photos show the blindhem for my machine but most machine manuals will show you how to sew this-definitely practice to get it right as there is a knack to it.

• 

• 

• 

I used 4 buttons on the bodice section and then 6 buttons on the skirt, evenly spaced so that there’s still a nice ‘split’ at the bottom. I have a ‘thing’ about button opening on skirts where the bottom button is too close to the hem, don’t ask me why, I just don’t find it aesthetically pleasing. For a novel detail I used red and blue thread to sew on the bodice buttons and ivory on the skirt. I also added a small hook and eye at the waist seam to take any strain off the button at this point. 

All that remains is to pop your dress on and pull up the ribbons to your desired amount and tie in a bow, trim the ends into neat Vs to stop them fraying. Once you’ve adjusted the gathers to your liking then pin and stitch in a few places as per the instructions to hold them in place evenly.  

I used green Grosgrain ribbon as a contrast to the otherwise nautical colours of my Regatta dress.

I just need to find a nice wide belt to finish it off I think although it works perfectly well without. My Regatta dress has already had two wears since I finished it and it’s quirky details make it stand out. It isn’t an ultra-quick make compared to some styles but it’s worth the effort and makes a charming and feminine summer dress. It would even work in more ’special’ type fabrics too, like panne velvet, Chantilly lace or crepe de chine for an evening or party dress.

Once again it’s been an interesting process to help test a pattern and Alice & Co were quick to respond to queries. Another reason I was keen to assist is because as a brand they are very supportive of the Sew Over 50 cause by reposting images shared by older makers using their patterns, and have generously provided prizes in our previous challenges.

So while the sun is out here in the UK this could be a nice addition to your summer/holiday wardrobe.

Until next time,

Happy sewing

Sue

My Minerva make this month isn’t for me!

My latest Minerva blog post is on their website from today and it’s a bit different from the others. This time I used a soft and fluid jersey to make a dress for my younger daughter Katie, not me. 

In the post I explain how I wanted to use a single pattern [Simplicity 8602] which, ultimately, I’ll adapt for 3 of us in my family-24 year old Katie, my 84 year old Mum, and me. The first two are done, the version for me probably won’t happen for a while yet though.

Katie’s dress started out as this blouse pattern.

Katie made life a bit difficult for me by wanting the blouse lengthened into a dress, plus altering the sleeves AND the neckline. I’ve written up all the details in the post if you’re interested in finding out how I did it. 

Katie in her finished dress, she wasn’t keen model!

I hope you find the post helpful and you can read it here. 

Until next time,

Sue 

Adapting a vintage shirt pattern into a dress.

Sometimes makes jump to the top of the queue just because the fabric grabs you, this is one of those makes. At the recent Sewing weekender Stoff and Stil generously gave each attendee 1 metre of fabric in their goodie bags and mine was this pretty vintage-toned georgette. It doesn’t take a sewing genius to notice that my dress took a lot more than 1 metre! My lovely friend and neighbour Elizabeth @eliza_sew_little and Melissa @fehrtrade had the same fabric and it wasn’t to their taste so they gave me theirs too.

What to make? Because of it’s drapey sheer qualities I wanted a style that exploited these features without being over-clingy, but also the fabric was in three separate pieces so I had to work within those constraints. It needed to be something where the top came out of 1 metre and the skirt came out of the other two metres. In the back of my mind I remembered an 80’s shirt pattern that was in my collection, I think donated to me by my neighbour although I have plenty from that era myself, it’s when my sewing life properly started so I still have virtually every pattern I ever bought!

Monster shoulders!

I like the horizontal seams and the simple T shape.

I had enough fabric to use style B with collar C and the pockets from D.

1986!

My original drawing had buttons all the way down but I got cold feet about putting that many buttonholes into georgette so I settled on a plain gathered skirt instead.

My neighbour had obviously made it at some point in the past as the 14 was already cut out so I just went with that, the 12 would have done though.

Georgette is a bit wriggly so take your time cutting it out, try and keep it as flat as possible on the table and don’t shift it about if you can avoid it. Pin carefully (I’m not a weights person) and sharp scissors are vital so as not to snag or catch on the fabric as you cut. Because it’s sheer and lightweight I didn’t want to spoil this with clunky interfacing in the collar and front facing so I used some sheer organza that was left over from a wedding dress alteration.  This has to be basted in position temporarily while everything is put together, the stitches are removed at the end.

Take your time sewing with a fiddly fabric like this, it’s hopeless if you’re in a rush because it shifts about and is quite ‘bouncy’ when you gather it up, hence the simplicity of my design. If you want a real quality finish I’d suggest using French seams wherever possible, especially if the fabric is plain because the seams will show through however because my fabric was patterned and I was being lazy I overlocked! Fine or sheer fabrics can pucker a little so use a fine needle and smallish stitch, not all machines handle sheer fabrics well though so you could try sewing with a layer of tissue paper underneath, tear the tissue away after you’ve sewn. If the needle pushes the fabric down into the needle plate you could try a foot with a small hole in it rather than wide hole (like a zigzag foot) that might help, or you can put a bit of masking tape over the needle plate to reduce the size of the hole and so reduce the risk of the fabric being pushed down it.

Once the top part was all put together I simply joined the other two remaining pieces of fabric at the selvedges to form side seams and gathered the top edge to attach to the lower edge of the ‘blouse’. This made a monsterously long skirt even when I made a deep double-turned hem so I turned it once more, for my own safety!

 

The seam and the pocket aren’t actually very visible but that’s fine, I know they’re there.

oops, eyes shut haha

I definitely need to wear a slip under it, I just have an M&S nude-colour one bought after a recommendation by Karen ‘Did You make That’ about a year ago.  I love my new Superga pumps too, the metallic burgundy goes perfectly by complete chance.

It’s all a bit floaty with a gypsy vibe going on but do you know what, it’s sooo lovely to wear, very liberating!! It’s a bit ‘out there’ for me but I feel really feminine in it, it’s pretty, it’s comfortable, even with tricky fabric it didn’t take that long to make. I’ll definitely be making another in something else, or even just the shirt part because it’s a really simple collar and the horizontal seams make it more interesting, best of all it just pops over my head. It isn’t a million miles from the Deer and Doe Myosotis that everyone is making either, that’s probably where I got the idea from without realising. Gifted fabric and a gifted pattern, buttons from the stash, organza from the offcuts make this, basically, a free dress and you’ve gotta love that! I wore it to the handmade fair at Hampton Court over the weekend and bumped into Karen Ball, she’d been one of the speakers at the sewing Weekender and she recognised the fabric!

Why not have a look at your patterns for tops, blouses and shirts, can you add a skirt? It doesn’t need to be anything tricky, just gather or pleat straight widths of fabric onto the bottom-that’s all a ‘dirndl’ skirt is anyway. Be aware of the gathering properties of the fabric you’ve got though. I know georgette (or chiffon, or even cotton voile) are very fine so they can take a lot of gathering, a firmer fabric can end up too chunky and less flattering so experiment first.

Until next time,

Happy sewing

Sue