Bellbird top from The Sewing Revival

The Sewing Revival are a small PDF pattern company based in New Zealand and I first discovered them through the first Sew Over 50 challenge at the beginning of the year. Since then I’ve made 4 (!) versions of their Heron dress and top, 2 dresses and a top for me and one top for my SiL for her birthday. I really like the simple but stylish aesthetic, coupled with the fact they can be quick to make which is a real ‘palette-cleanser’ if you’ve been doing some more complex projects beforehand.

The Bellbird is basically a T-shaped top with dolman sleeves but it’s USP is the wide gathered cuffs on the short sleeves. You can choose between a scoop or a V neck, I’ve made the V.

It probably works best in a fabric with a bit of drape like crepe-de-chine, a soft viscose or fine linen, I used (eventually after a lot of going through the stash to find the right quantity!) a sheer polyester chiffon of unknown provenance. It wasn’t quite enough to cut the front and the back both on folds so the front went on the fold and the back went on the selvedges so there’s a seam. Also, because of the sheer nature of the fabric I opted not to use the neck facings but I made some bias binding to finish off the neck instead.

It’s very important to stabilise the neck edge as soon as possible so that it doesn’t stretch out of shape. I ran a row of stay stitches 5mm from the neck edge front and back-you could also use stay-tape or iron-on stabiliser if it isn’t going to show. Next I joined the shoulders using French seams as the fabric is so sheer, it gives a better quality of finish and makes the seams a little bit stronger too as they are sewn twice in this method. you could use a tiny flat-felled seam here if you wish but I think that’s taking things a bit far for a polyester chiffon!

I decided to use the French binding method which involves cutting bias strips which are at least twice as wide as you need plus seam allowances, making sure it was plenty long enough to go right around the neck with some extra to spare. Join the strips in the usual way if you need to and press the seams open before you fold the strip in half lengthways and press all along the folded edge so that you have a long continuous strip of folded bias binding. Next, I wanted the binding to show on the right side of the fabric so this means you need to pin the cut edges of the binding together to the neck edge ON THE WRONG SIDE. When you sew it on around the neck edge the binding will flip to the OUTSIDE thus enclosing the raw edges inside itself. The photo above shows where I’ve sewn the bias on, I’ve under-stitched it on the inside and then flipped it to the outside and now it’s pinned down. Finally I topstitched it down on the outside. Overall I’m happy with how this turned out because the chiffon is very very wiggly and you’ll need to be a bit patient with yourself if it’s the first time you’ve attempted a fabric like this. Take each step slowly and tack or baste as you go if you’re in any doubt about your ability to sew just using pins.

Once the neck is sewn it’s a case of joining the underarm seams, also using French seams, and then making the casing to enclose the elastic. This is the ‘detail’ of the Bellbird top so try and use wide elastic and don’t make it too tight on your arms as this is gives the best effect. Finally, finish off by making the hem.

I know chiffon isn’t exactly an ‘every day’ fabric but I’ve worn this top twice already now-albeit with a cami underneath as it’s sheer-and it’s very comfy. It droops backwards off my shoulders a little but I find that’s often the case with V necks on me when the garment is loose-fitting. I might try the scoop neck next time to see how that is. It’s designed to be a fairly close fit over the hips, not loose and floaty, I made a size large and it’s perfect for me. The Sewing Revival patterns come in selection of size brackets and you choose the set closest to you personal measurements. If you fall between sizes I think I’d advise going for the size nearest your bust measurement and altering the hip to suit.

Have you tried any other Sewing Revival patterns? There are some new ones just out including an interesting pair of diagonal-seamed trousers which are very intriguing so I’m sure these won’t be the last patterns of theirs that I’ll review.

Until next time, Happy Sewing

Sue

Simple Sew Kaftan top & dress

IMG_5397

Summer is (allegedly) on it’s way at last and so my sewing thoughts turn to summery frocks. On that optimistic basis I decided on the Kaftan top and dress as my next Simple Sew blogger review and this time we have Doughty’s Online as one of our generous fabric sponsors too. I have to confess I wasn’t familiar with them but when I checked out their website I was very impressed with their wide selection of fabrics available. I chose this beautiful digitally-printed cotton lawn by Lady McElroy fabrics in a design called ‘Scottish Emblem’ and it’s lovely quality, similar to Liberty Tana lawn I’d say.

IMG_5133

Before I cut into the lawn I decided to make the top version in some georgette that was languishing in my stash. I’d bought it ages ago in the Birmingham Rag Market without a project in mind, I wrote post about that visit which you can read here.

I’ve made my last few Simple Sew makes in size 14 based on my measurements and this one was no different. Georgette is quite wiggly so my advice is to take your time laying it up, tear the cut ends to get a really straight edge and use the edges of the table to give you a visual ‘marker’ to lay the fabric up as straight as possible. You can even layer it between spot-and-cross paper but that’s longwinded and uses up your paper. Georgette is also sheer and frays quite badly so I used French seams throughout. The pattern calls for bias binding on the neckline and sleeves but that would be too heavy on georgette so I simply pin-hemmed them instead.

This revealed a bit of an issue with the depth of the V!

fullsizeoutput_2325
Crumbs! I’ll need a vest under this!

It all went a bit pair-shaped at this point because I got in a right two-and-eight with the buttonholes and the casing for the waist. I wasn’t happy with the position I sewed the buttonholes (according to the pattern) although in the end after a lot of messing about I left them where they were and made the casing wider around them but narrower for the rest. I found the instructions a bit confusing so I urge you to take each stage carefully and take into consideration how wide your ribbon/cord/elastic is when making the buttonhole openings and make the channel only as wide or narrow as you need it to be, not necessarily the width marked on the pattern.

Once I was happy with this first version I went ahead and cut out the full-length one in my lovely cotton lawn. It has a large repeat which is a one way design although not with an obvious up or down-in other words, everything must be cut going the same way but it didn’t matter which way that is. Just before I cut it I noticed when I placed the CB bodice on the fold that the neck edge isn’t quite ’true’ which would result in a slight point in the centre of the neck. It isn’t difficult to correct this.

fullsizeoutput_2328
If you don’t have a Patternmaster use something with a right-angle corner like this envelope to straighten up the line.

fullsizeoutput_2327
the new line is where you need to cut.

One other change I made before I cut was to raise up the V so it wouldn’t be as revealing as the georgette one!

IMG_5351
Stick an extra piece of paper behind matching the CF line with a new line on the paper behind. Stick it down with tape.

IMG_5352
Decide how much you want to raise the V and draw in a new line so that it blends smoothly with the original.

IMG_5353
There’s a seam in the centre front so mark the seam allowance with a notch

fullsizeoutput_2329
The back goes on the fold and the front can go against the selvedge, the same way up in this case.

fullsizeoutput_232a
Because the fabric is a one-way design I needed to cut each skirt piece one above the other instead of interlocking them. Instead of simply folding the fabric in half and wasting two strips down each edge I folded it like this and then there’s useable piece left for something else!

It was just a case of putting everything together like before, the difference this time is that I added self-fabric bias binding to the neck, I also stay-stitched the neck edges to prevent them stretching before I sewed the bias on. First join the shoulder seams then…

IMG_5378
I cut a strip of bias binding which I folded and pressed in half lengthways first. For this method place the it with cut edges matching on the WRONG SIDE of the fabric, sew on with a 5mm seam allowance.

IMG_5379
Trim the seam down to 2-3mm

IMG_5380
Press the seam towards the bias, the second row of stitching you can see is the stay-stitching.

IMG_5383
Turn the bias to the RIGHT SIDE and stitch carefully and neatly close to the edge like this. Now you can join the CF seam together. I learned that this technique is called French binding which I never knew before-every day is a day in school!

Before I joined the under arm seams I added some lovely pom-poms which I’d bought in Liberty especially.IMG_5381

IMG_5382
I sewed it on using a zigzag stitch because it’s difficult to get close as the pom-poms get in the way. You could probably use a straight stitch and a zip foot here too.

IMG_5384
I cut the pom-poms carefully so that there wouldn’t be one caught in the seam.

IMG_5385
The reverse of the pom-poms

IMG_5386
I added a fancy leaf design stitch on my Pfaff to edge it with.

I tried the bodice on and decided that the neck needed the pom-pom trim too, I wasn’t originally going to put it here but the neckline looked a bit plain against my pasty white skin!

 

I pinned it on in two different ways and eventually settled on just around the V

Because I’d bought a very narrow cord to put around the waist I made very small horizontal round-ended buttonholes instead of the larger vertical ones indicated on the pattern. Attach the skirt and make the casing for the cord according to the instructions and you’re almost there.

IMG_5390
I pulled the cord through using a useful old-fashioned tool called a bodkin. Clamp the cord (or elastic) between the ‘teeth’ at the end and slide the small metal loop up towards the teeth until it’s tight and the cord can’t come loose. Then you just push the cord through the channel.

I opted to leave a knee-high split in one of the side seams. The sun came out so Doris posed outside!

IMG_5397IMG_5404IMG_5403IMG_5402

IMG_5400

IMG_5401
The jazzy orange cord came from McCullough & Wallis in London.

IMG_5399IMG_5406

I eventually finished the georgette version too, I used a shoelace from an old pair of my husband’s shoes in the casing because it was a perfect colour-match! I cut off the ends and embellished them with a few colourful buttons.

 

 

 

I hemmed this one by using the rolled hem setting on my overlocker. It definitely needs a vest under it though!IMG_5569

The kaftan will be a lovely cover-up on holiday in the summer and as I chose the cotton lawn it will be decent enough to go out in public and not just by the pool on hot days too! It would work well in a drapey viscose or look glamorous in a slinky crepe de chine, or a lightweight jersey like interlock. The short version would look nice in a Broderie Anglaise or Swiss Dot too. Instead of the pom-poms you could embellish it using Indian or Chinese-type braid, ribbon or even beading, you could put elastic through the casing too instead of cord or ribbon.

Thank you especially to our new fabric partners Doughty’s Online for supplying my choice of cotton lawn, it’s been lovely to work with and I’m looking forward to being able to wear it…soon, I hope!

Happy Sewing,

Sue

 

Imogen blouse from Sew Me Something

fullsizeoutput_1f90

This has become one of my favourite patterns this summer because I’ve made 3 now and I only bought it in March at the Spring Knitting and Stitching show! What I like about it is it’s beautiful simplicity with just a bit of detail on the neckline. Sew Me Something are based in Stratford Upon Avon and designer Jules sells lovely fabrics, teaches classes as well as producing a range of very wearable pattern designs. Whilst I haven’t been able to visit the shop, I’ve met Jules a number of times now at various shows in London. I admire her personal style and we have similarities in our work background, I used to work in high-end bridal and evening wear too…back in the day.

After I bought the pattern in March I made the first one in a slubby white poly/cotton (I think) origin unknown as a wearable toile. Rather than cut up the pattern I traced it off onto Swedish tracing paper which is stronger than regular tracing paper. I’m not always in the habit of tracing patterns off (especially if they’re tissue paper anyway) but, perhaps bizarrely, when it’s good quality paper I often do. I was short of fabric so the back had to have a seam in it but that wasn’t a problem. The instruction booklet is clear and well illustrated, the only possibly tricky part of the design is the notch neck front but following it slowly and methodically it works a treat. I’ve photographed my most recent version which hopefully makes it clear if you’re reading this as a bit of help.fullsizeoutput_1f97fullsizeoutput_1f98fullsizeoutput_1f9afullsizeoutput_1f9bfullsizeoutput_1f9c

IMG_3992
sorry this one’s a bit blurry 😦

Once you have the placket pieces overlapping I stitch through all the layers at the bottom to secure them, then I zigzag the edge to neaten them (easier than trying to put such a tiny piece underneath the overlocker.IMG_3993

Finally ‘stitch in the ditch’ carefully from the front to hold the placket in place.IMG_3995

IMG_3996
Oops, got that bit caught! annoying but easily rectified.

With my first plain white version I followed the balance marks for the gathering but actually I felt the gathers looked too spread out so when I made my second version (and now the third!) I’ve condensed the gathering into smaller areas on the front, shoulders and centre back which I’m happier with.

Another thing I like is the instruction to sew hems separately before joining the side seams. This sounds a small thing but because the hem is dipped and rises at the side seams it means you get a much neater finish at the side seams-genius!

IMG_3998
I sewed the sides with French seams so it super-neat inside. I’ve used contrast yellow on the hem too.

fullsizeoutput_1f1f
I’ve noticed I always wear my gorgeous ‘bee’ necklace from Alex Monroe with Imogen because the notch shows it off so well. I’m wearing one of my Zierstoff Gina skirts and you can read the blog about those here.

IMG_3708
Autumn leaves at Anglesey Abbey, Cambridgeshire.

My second version was made using the gorgeous coral lightweight linen I bought from Jules with the pattern in March.

 

I’ve made all my versions with the longer length sleeve with loose elasticated cuff, you could obviously make them tighter but I prefer them like this.

I wore the coral top to the Sewing Weekender in August and it got plenty of compliments (and obviously I told everyone what the pattern was, although several people recognised it straight away)

fullsizeoutput_1f2f
Hard at work (photo credit Charlotte Powell at English Girl at Home)

The jolly fabric for my newest version came from the swap hosted by The Foldline at the recent Great British Sewing Bee Live, it’s a sharp contrast to the plain fabric of the first two that’s for sure! Thanks Kate, hope you like what I’ve done with it…

IMG_3672
I look a bit crumpled after all that shopping and chatting at GBSB Live…I’ve made it to the cover of Love Sewing….well, nearly 😉

What I’ve loved about this top is how comfortable it’s been in warm weather, and the details are pretty but understated-a trademark of Sew Me Something patterns to be honest. I know I’ve made 3 but I reckon there’ll be more, it would be gorgeous in a silk chiffon or crepe de Chine, or fine wool challis for example. You could add a trim to the neck, in the seam perhaps or beadwork perhaps? This third version I’ve cut a little longer than the previous two simply because I had plenty of fabric. I’m going to layer it up in the winter with a long-sleeved tee underneath. Another thing I like about this brand is that the sizing is for real women and goes right up to a 22-not all independent companies have this range and I’m not sure why.  and that seems a shame.

fullsizeoutput_1f91
I lengthened this version by 4cms simply because I had plenty of fabric. If your fabric is wide enough to fold the selvedges to the centre it’s an economic way of cutting out, it also gives you the ability to line up elements of the print so they run pleasingly around the body (always a dead giveaway of cheap RTW clothes)

fullsizeoutput_1f9d
I finished the inside neckline this time with a bit of soothing slip-hemming.

IMG_4020
Number 3 finished!

 

I want to stress that I bought my own copy of the pattern and the fabric so any opinions expressed are entirely my own. I’m trying out a few trouser patterns lately (more on that to follow in a few weeks) so I’m tempted to try one of Sew Me Something’s trouser patterns in the future but there’s a long Autumn sewing list to work through before I buy anything more….famous last words!

Happy sewing

Sue