The Heron dress by The Sewing Revival

By being a part of the organisation of the first Sew Over 50 challenge it has meant I’ve come across pattern companies which I hadn’t heard of before. In several cases they made contact with me directly through the comments at the end of the first blog post. Not all of these companies make patterns that appeal to me personally but The Sewing Revival in New Zealand was one which did. Janine Pomeroy has created a small but growing number of simple, chic and wearable styles and because they are PDFs they are easily available to you wherever you are in the world.

Janine very generously gifted me the Heron dress (it also comes as a top too) and I’ve just finished making it up in time for my upcoming holiday.

The PDF was initially just available as A4 or US letter format but is one one of their first to also come as A0 copy shop format too. It comes with LOTS of useful and helpful information for when you print it out-there’s even instructions in how to print only the size you need if you prefer, I can’t think of another company I’ve come across which actually talks you through it, I have limited IT skills and wouldn’t have known how to do this for myself so that was helpful. Also, when ordering your pattern, you opt for the set of 3 sizes closest to the size you require according to your measurements. I like this arrangement because you don’t have an overwhelming number of lines to try and cut out from. I’m a UK 12-14 in RTW so I’ve made the size Medium and I’m very happy with it. If you do print all the sizes because you want to cut between different measurements for example then each size prints in a different colour-this is worth bearing in mind because if you print in B&W only they aren’t various styles of dot and dashed lines.

I bought some lovely pale blue viscose/linen printed with navy and red flowers from my recent visit to Ditto fabrics in Brighton specifically for the Heron. If you’re a novice sewer there is plenty of guidance included on which fabrics would work well, as well as other lay plan and cutting tips too.

It’s more pale blue than grey, you’ll see in my later photos.

There are only a few pattern pieces so it doesn’t take long to cut out and start sewing. There are some clever details which mean you don’t have lots of extra facings or elastic casings to cut and sew on, they are included which means the sewing doesn’t take that long either.

I printed out the making instructions in booklet format and I found the photos a tad small that way, I should have left them A4 for clarity although, that said, it’s fairly obvious what you’re doing and there are plenty of written instructions too.

I like the clever way the front facing is ‘grown-on’ so you just neaten the centre front seam and, eventually, once the backs and sleeves are sewn together [raglan sleeve so not tricky setting in] the neck edge gets folded over twice and stitched. This becomes the casing for the elastic.

the neck edge folds over and the stitching encloses the elastic. It’s a very simple method.

The deep cuffs fold up in a similar way which is clever because it does away with the need to neaten the cuff hem or to sew on any binding to create a casing for the elastic. It all forms one finished unit in the end.

I used the quilting guide on my machine to keep the correct distance away from the first row of stitching [it’s the piece of bent metal that might be included with your other machine attachments. It slots into a little hole just behind the foot usually and you tighten a little screw to keep it the distance you want] The elastic is wide in the sleeves which means you can’t see any of your usual visual markers and this saves having to laboriously draw on markings.

I should add that the Heron includes in-seam pockets which are a must, and there is a belt pattern too with additional ideas on how to add D-rings to it so it isn’t just a tie belt. I was so eager to finish that I didn’t notice until after I’d sewn it that the hem is finished using bias tape! This gives a lovely neat finish without losing any length, I just did a narrow rolled hem which looks fine too.

worn without the belt
…and with the belt.
rosy cheeks after a run and no make up!

As I said earlier, I was given the pattern to try out but I can honestly say I’m really pleased with my Heron and I look forward to wearing it. I’ve already got another fabric lined up for a blouse length version. I thought the sleeves looked like they might be too short but actually they are fine.

The reason The Sewing Revival came to my attention is because they use realistic models to promote their patterns, Janine made a conscious decision to do that whilst still creating covetable and wearable styles of the sort that dressmakers of any age will want. I’d love to know if you’ve used this brand and what you thought, or do you know of any others like it that could be brought to a wider audience? The Sew Over 50 challenge runs until March 15th 2019 so you’ve still got time to join in, and you don’t need to be over 50 to participate!

Until next time,

Sue

My Minerva make this month isn’t for me!

My latest Minerva blog post is on their website from today and it’s a bit different from the others. This time I used a soft and fluid jersey to make a dress for my younger daughter Katie, not me. 

In the post I explain how I wanted to use a single pattern [Simplicity 8602] which, ultimately, I’ll adapt for 3 of us in my family-24 year old Katie, my 84 year old Mum, and me. The first two are done, the version for me probably won’t happen for a while yet though.

Katie’s dress started out as this blouse pattern.

Katie made life a bit difficult for me by wanting the blouse lengthened into a dress, plus altering the sleeves AND the neckline. I’ve written up all the details in the post if you’re interested in finding out how I did it. 

Katie in her finished dress, she wasn’t keen model!

I hope you find the post helpful and you can read it here. 

Until next time,

Sue 

making the Utility dress by Simple Sew Patterns.

My latest Simple Sew blog make is the fairly recently released Utility Dress, an easy-fitting style with elasticated back waist, drawstring front waist and kimono-shape sleeves. I would say that it’s suitable for softer woven fabrics like chambray, cotton lawn, washed linen or fluid viscose-types, or soft woollens for winter. Having said all of that I chose to make mine in a medium-weight jersey in a tan/black dogtooth check design from Doughty’s Online fabric store. It still works well but you just need to take care not to accidentally stretch some areas such as the neckline in particular and the shoulders. Because of the busy design on this fabric I left out the CF seam and cut the front on a fold instead, thus avoiding any difficult pattern matching down the seam. 

reinforcing the neckline with iron-on interfacing.

I reinforced the neckline using narrow strips of iron-on interfacing I cut myself but you could use the readymade type, I did the same on the front shoulder seams too. You could even use up short lengths of ribbon here for a pretty effect inside. 

As always I deviated from the method of construction a couple of times. After joining the front and back at the shoulders, instead of using ready made bias binding to neaten the neck edge I cut two narrow strips of the jersey which were slightly shorter than the neck edge [the amount will vary depending on how stretchy your fabric is. It’s usually about 85% of the neckline measurement]

Fold them in half lengthwise to form two narrow strips and then place one over the other at a right angle with the folded edges on the ‘inside’ of the V. 

Two narrow strips of fabric, overlapped at a right angle and stitched to hold them in position.

Then reinforce the V on the dress with a row of stitches just within the seam allowance, turning at the V, then carefully snip into the V up to the stitching line.

carefully snip into the V

With right sides together pin the binding to the V section only initially [see the photo to clarify this] and stitch this V section in place by about 5cms either side of the V. Pivot and open the snip as you sew to allow the binding to sit neatly and flat on top of the neck edge. If you’re in any doubt then tack this section first to prevent it moving. 

Attach the V section first, when this is right move on to the rest of the neckband. The pivot point is marked with a purple dot, This is where you rotate the fabric underneath thus opening up the snip you made and enabling the binding edge to match the neck edge.

I pinned on the rest of the neck binding double-checking the length was short enough before sewing the join at the CB. Now you can stitch on the remainder of the band knowing that the V is already sewn accurately. [Thank you Melissa Fehr for this new technique, she uses it in her activewear patterns and I’ve found it gives a nice neat result] Trim and neaten the seam on the inside if required and then you can topstitch it down to prevent the binding rolling.

neckband in position and then topstitched close to the join..

Next I ignored the method for putting the sleeves on. Instead of sewing the side seams up leave them open so that you can open the garment out flat and pin and sew the sleeve strips on more easily.

sleeve band stitched on before sewing up the underarm seam. You can just see that I had pressed the fold line on the sleeve band before I sewed the seam here. This makes it easier to fold once it’s in position. Press the seam towards the sleeve.

Now sew up the side seams including the sleeve bands. Fold the bands up towards the sleeves and either neaten/overlock the raw edge before stitching it down though the stitching line or turn the raw edge under and slip stitch in position. 

neaten the underarm seam before you turn up the sleeve band.

Moving on to the skirt and putting in the hip pockets. I used scraps of matching fabric for the pocket lining as I was concerned that the pattern might show through skirt front. This can reduce bulk too if you’re using a heavier-weight fabric.

pocket bag made with lining scraps

After the pocket bags are complete comes the waistband. I followed the instructions although I think there might be an easier way, I just haven’t worked it out on this version. Although it says there’s a chart to tell you what length to cut the elastic for the back waistband I couldn’t find it anywhere! In the end I decided to cut it half my waist measurement minus about another 6cms, to allow for the stretching and gathering up. I used a length of grosgrain ribbon to go in the front casing. 

I used a zip foot when sewing the waistband to the top of the skirt because I felt it made it less likely that I’d sew accidentally through the ribbon and elastic. 

Joining the waistband containing the ribbon and elastic to the skirt. I’ve used the zipper foot so that I could keep close whilst still making sure I didn’t accidentally sew through the ribbon or elastic. I then neatened this seam on the overlocker.

After joining the top and skirt together all that remains is to hem the skirt. I used a twin needle to do this but you could just turn it up twice and stitch. If you do use jersey fabric for this dress it’s best to sew it with a ballpoint/stretch/jersey needle so that you don’t ladder the fabric as you sew. 

This is a nice comfortable style which I’ll enjoy wearing. Disappointingly there are silly errors again in the instructions which is always so annoying, I hope this won’t be enough to put you off trying this Simple Sew style though which is a bit of a departure from their more usual vintage-style dresses. 

Until next time,

Happy sewing

Sue






I’m guest pattern reviewer for Love Sewing magazine!

I could hardly believe it when I got an email out of the blue from Love Sewing editor Amy Thomas a couple of months back. She was inviting me to make and review the two patterns which were going to be the free gifts with upcoming issue 46. They were two separate patterns, Butterick 6461 trousers in two lengths with top-stitched seam details and a stretch waist, and McCalls 7322 a simple top with several variations for neck and sleeves.

 

Once I’d agreed to the challenge (I didn’t need any persuading!) Amy suggested which companies I could select fabric from so I browsed their websites for quite some time until I found what I was looking for. The trousers called for a fabric with some stretch and eventually I chose from Danish company Stoff and Stil their stretch 10 1/2oz denim in dark blue [Amy had advised me that black doesn’t photograph well and, although I would have liked a printed stretch cotton, I couldn’t find anything suitable or to my taste] The top could be made with either a jersey or drapey woven fabrics and I chose a really pretty crepe with watercolour flowers in gorgeous inky shades of plum and blue. Stoff and Stil are breaking into the UK market and have an extensive range of fabrics and patterns, wool and haberdashery available on their website. Their delivery charge however  is quite high and I wouldn’t suggest them if you’re impatient or in a tearing hurry as delivery is usually 5-7 days.

While I waited for these to arrive (a slightly nerve-wracking wait because I was up against time to get the patterns made up by a tight deadline) I decided to make a wearable toile of them both to check the fit and any other idiosyncrasies they might throw up.

I had a colourful cotton sateen in my stash which I hadn’t found a use for yet so I made the trousers up in that. I cut a size 16 according to my measurements although I suspected (hoped) that would be a bit big. [You should always go by your own measurements before anything else if you’re making a fitted style because the sizing bears no relationship to shop-bought clothing and will almost certainly be too small if you ignore it. Just because you’re a 10 or a 16 or whatever in the shops doesn’t mean you’ll be the same in paper patterns-that’s the voice of bitter experience talking!!]fullsizeoutput_1ec7

In spite of all I’ve just said I soon discovered they were miles too big though the legs and were an unflattering baggy shape that looked nothing like the shape in the photo. The inseams are sewn up first so, to remove some width, I skimmed at least 2cms off each outer or side seam.

IMG_3840
several changes of mind on the side seams!

This was an improvement but still quite generous in the legs-as a result though I knew I would need to cut at least one, if not 2, sizes smaller when I made the actual trousers. The waistband wasn’t very successful either-I didn’t like the way they told you to put the elastic in, I did it as instructed although I changed the toile later and did the denim version my own way (more of that later)

fullsizeoutput_1f31
The original elasticated waist finish before I changed it. The elastic was too stretched by the process and was all baggy around my waist.

I’d opted to make Style B which are cropped length with turn-ups.

 

 

Once I’d toile-d the trousers I turned my attention to the top. I decided on the longer sleeve version with a bateau neckline, Style F. I fancied style C or D with a neckband initially but I got cold feet!! I’ve been sewing on and off for over 40 years and I just thought “If I mess this up it will be there in the magazine for everyone to see!!” Nightmare! 

I made a very quick toile in a rather boring viscose, again from my stash, and the result was a rather boring top!! Ok, what to do?

IMG_3938
It looks quite pretty here but it’s featureless….

Fortunately the fabric order arrived and the printed crepe was really lovely, much nicer colours than it’s photo online suggested so I decided I’d use it’s drapiness and work the current sleeve-detail trend by making a floaty gathered cuff instead. Crepe is a fabric which often has a slightly rough, matt feel and has a nice inherent drape  which is caused by the way the yarn is twisted and then woven into fabric. It works well for bias cut skirts, dresses or blouses and anything slightly ‘flippy’.

One thing that the toile had thrown up was that the neck was slightly too wide and my bra straps showed so I increased the width of the pattern pieces. IMG_3712IMG_3713

fullsizeoutput_1ef1
It’s easy to increase the shoulder width. Start by sticking a piece of spare tissue from the off-cuts onto the shoulder where you want to make the increase. Using a ruler extend the shoulder line out at tfirst. Mark the length of the extension, I was adding 1.5cms, then take a line down in a right angle towards the neck making it into a smooth curve where it meets the neck edge. Hopefully the photos make this a bit clearer. Obviously you’ll need to do this to both the front and the back, as well as the front and back neck facings.

Because the crepe is 150cms wide it meant that I could fold the selvedges into the centre line and then the front and back pattern pieces are side by side. This matters because any pattern of the print which runs across the fabric will run in a pleasing line around the body.

IMG_3717
Selvedges folded into the centre and the front and back pieces placed onto the 2 folds.

Another alteration I chose to make to the top was to add a little more fullness at the hem level. The toile was a tiny bit snug at hip level so to increase at that point I pinned the neck edge against the fold but pivoted the hem level away from the fold by about 1.5cms.

fullsizeoutput_1ef3
Pin at the neck line

fullsizeoutput_1ef2
The hem is pivoted out by about 1.5cms at hem level.

For the sleeve-hack I used the short sleeve and then cut 2 rectangles that were 50cms x 30cms (50cms is approximately 1.5x the bottom width of the short sleeve) You can make them as full as you want but if they’re too wide they can get a bit annoying catching on things or dripping in the washing up!!

One of the things I liked about the pattern was it’s explanations of various techniques used during the making up. If you’re a complete beginner it isn’t always obvious what a ‘back-tack’ is or how wide the seam allowances are for example and the instructions with many patterns expect you to know things like that already.

So I made up the top again (you could use French seams if you haven’t got an overlocker or your fabric frays badly) I joined the shoulder seams and then attached the neck facings because you can have the whole thing open fairly flat which makes it a bit easier. Self- or contrast bias binding would look nice as an alternative but take care not to stretch the neck edge as you do it because it would be all droopy-dangle…

fullsizeoutput_1f0d
Neck facing in place ready for stitching

fullsizeoutput_1f0e
trim the seam and snip carefully at the curviest places so that it will turn and press smoothly

IMG_3753
Understitch through the facing and seam allowances and press the facing flat, rolling the seam slightly so that comes to the inside a little. Bar tack in place to the shoulder seams to prevent the facing rolling to the outside and showing- V annoying!

Now sew up the side seams, try it on to check for fit and make any necessary adjustments then it’s ready for sleeves.

This time I made up the short sleeves then made 2 tubes of the rectangles for the floaty bits. Around the top edge of each tube I ran two parallel rows of gathering stitches within the 1.5cms seam allowance. I always back-tack at one end and leave the other loose to pull up.

IMG_3760
The gathering stitches are the longest straight stitch your machine will do, don’t get too close to the edge with the first row and make sure the second row is then parallel to the first.

I neatened the bottom edges of the tubes at this point too by making a ‘pin hem’.

IMG_3757
Start by folding over about 5mm and sewing very close to the edge with the wrong side up towards you. It’s the bobbin thread that will show on the right side of this technique so make sure you’re happy with the colour match.

IMG_3758
Then trim the excess fabric very carefully!

IMG_3759
Fold again, it should be very narrow, and sew again over the first row of stitches, this should also be close to the edge. The picture shows what it should look like on the right and wrong sides.

 

IMG_3761
Sew up the sleeve underarm seams and then pin a ‘tube’ to the lower edge of each sleeve, matching the underarm seams. Gently pull up the 2 top threads [you don’t pull all 4 threads because nothing will happen]  until the tube matches the same size as the sleeve. Secure the pulled-up threads in a figure-of-eight around a pin so they don’t unravel. Make sure you return your stitch length back to normal then sew together on the 1.5cms line.
Repeat for the second sleeve then neaten the edges of the joins by your chosen method.

IMG_3762
Frill in position. I ran two more rows of ease stitching around the crown of the sleeve ready to set them into the armhole.

fullsizeoutput_1f0c
The small circles indicate where the ease stitches should start and finish but on the toile this wasn’t enough and I got puckering putting it into the armhole. Where I’ve placed the pins is a better place to start and finish the stitching, it eaks out the fullness better I think.

When I’m setting in sleeves I always start by matching the underarm seams, then the shoulder seam balance mark followed by the front and back armhole notches. Next I pull up the ease stitching gently until the sleeve fits into the armhole, this may take a little while to get a pleasing fit so don’t rush it. Once you’re happy with the fit stitch the sleeves in (there’s nothing wrong with tacking them in first if it helps) Try the top on to make sure the sleeves look OK and then neaten the armhole seam by your chosen method.

Finally I made another pin hem on the hem itself. Although the top looked lovely as it was I like to add little details to make a garment really original so I rummaged through my vast collection of buttons and found a selection in various sizes and colours which I grouped on both the gathered sleeve seams.

IMG_3763
I’ll often sew them on with contrast threads too and with the holes at different angles.

28_09_17_LS_Reader42949

So that’s the top, now for the trousers.

I washed and tumble-dried the denim as soon as it arrived because there will always be excess dye in denim and some shrinkage will occur too. I used a denim needle to sew with and I had specific top-stitch thread ready for the seaming details although you could use regular thread, I used regular thread to sew them together. A denim needle is also not essential but it deals with the extra thicknesses involved much better, a sturdy-sized universal needle would be ok if not.

Because I’d made the toile I cut the denim version out making them two sizes smaller. One little change I made was to raise the centre back waist a bit higher because I felt they drooped down at the back.

IMG_3691
I raised the CB seam by about 1cm. There’s a handy tip in the magazine about lengthening this seam further if you need to increase the ’seat’ length.

Sewing them together was straightforward after that, I used a slightly contrasting blue top-stitch thread for the seam details.

IMG_3690
The top-stitched pleat details on the knees.

IMG_3692
Top stitch nice and close to the seam. You could probably use a twin needle but mine is very temperamental and it’s often quicker to sew twice than spend ages unpicking and re-doing!

fullsizeoutput_1ef0
Joining the two legs together. Stitch this seam twice for extra strength, the second row close to the first inside the seam allowance.

IMG_3694
I invested in this cunning little gadget called a ‘jean-a-ma-jig’ You slot it under the presser foot to raise it up slightly and then it sews better over the thick layers of material. It worked a treat I thought and they aren’t expensive (although a folded up piece of card might work too) I’ve heard them called a ‘hump-jumper’ recently too!

Then I got to joining the legs up and, even though I’d cut two sizes smaller, they were still too baggy! I skimmed yet more off the side seams to slim them down some more. It might have been more sensible to measure my thighs and compare that figure to the paper pattern!

I put the elastic in according to the instructions again but it was a disaster! By sewing through the elastic as directed all that did was sew in a stretched position and it couldn’t retract back so it was all baggy and horrid around my waist! I unpicked all of that and sewed it instead into a channel using my zipper foot to sew close to the edge of the elastic under the fabric without catching it (hopefully)

 

If you’re not confident sewing it this way then you can also sew a channel and then pull the elastic through separately using a bodkin or a strong safety pin.

All that remained was to sew the turn ups as before and they’re complete!

They’re still a bit baggier than I wanted and I might even bring them in some more although better that than make them too tight in the first place, they have hint of maternity trouser to them at the moment although useful if I’ve eaten a big dinner!!

On September 28th I travelled to Stockport with my makes for a photoshoot that many of you will by now have seen in issue 46 of Love Sewing magazine. It was so much fun and it was a real treat to have my make up done by professional Nina Rochford and and be photographed by Renata Stonyte. Along with Editor Amy they really put me at my ease and, whilst I’m not a natural model, they managed to get some nice pictures. It’s been a real thrill to feature in the magazine and to have the opportunity to share my hints and tips with readers. I do hope they have been of some use or help to you, you can email me at susanyoungsewing@gmail.com if you want to ask a specific question, or advice.

28_09_17_LS_Reader42968
I’ve rarely looked so glamorous…thank you Nina

28_09_17_LS_Reader43017
Laughing at Amy’s ‘hilarious’ jokes!

28_09_17_LS_Reader42921
Hmmmm….

28_09_17_LS_Reader42916
She’s got the moves like Jagger!!

28_09_17_LS_Reader43020
I like this shot with Amy

28_09_17_LS_Reader42996

Love Sewing page 3
I’m a page 3 girl!!

I’ve loved writing for Love Sewing and I’m more than happy to do it again! I’m not saying I’m an expert on everything sewingwise-far from it-but I’ve made a ton of different garments over the years, and made a ton of mistakes over the years too!

Whilst I was invited to write the pattern review, and provided with the fabric by Love Sewing, all opinions expressed and advice offered are my own and I hope you might find them helpful if you’re making up the patterns in the future.

Happy Sewing

Sue

Imogen blouse from Sew Me Something

fullsizeoutput_1f90

This has become one of my favourite patterns this summer because I’ve made 3 now and I only bought it in March at the Spring Knitting and Stitching show! What I like about it is it’s beautiful simplicity with just a bit of detail on the neckline. Sew Me Something are based in Stratford Upon Avon and designer Jules sells lovely fabrics, teaches classes as well as producing a range of very wearable pattern designs. Whilst I haven’t been able to visit the shop, I’ve met Jules a number of times now at various shows in London. I admire her personal style and we have similarities in our work background, I used to work in high-end bridal and evening wear too…back in the day.

After I bought the pattern in March I made the first one in a slubby white poly/cotton (I think) origin unknown as a wearable toile. Rather than cut up the pattern I traced it off onto Swedish tracing paper which is stronger than regular tracing paper. I’m not always in the habit of tracing patterns off (especially if they’re tissue paper anyway) but, perhaps bizarrely, when it’s good quality paper I often do. I was short of fabric so the back had to have a seam in it but that wasn’t a problem. The instruction booklet is clear and well illustrated, the only possibly tricky part of the design is the notch neck front but following it slowly and methodically it works a treat. I’ve photographed my most recent version which hopefully makes it clear if you’re reading this as a bit of help.fullsizeoutput_1f97fullsizeoutput_1f98fullsizeoutput_1f9afullsizeoutput_1f9bfullsizeoutput_1f9c

IMG_3992
sorry this one’s a bit blurry 😦

Once you have the placket pieces overlapping I stitch through all the layers at the bottom to secure them, then I zigzag the edge to neaten them (easier than trying to put such a tiny piece underneath the overlocker.IMG_3993

Finally ‘stitch in the ditch’ carefully from the front to hold the placket in place.IMG_3995

IMG_3996
Oops, got that bit caught! annoying but easily rectified.

With my first plain white version I followed the balance marks for the gathering but actually I felt the gathers looked too spread out so when I made my second version (and now the third!) I’ve condensed the gathering into smaller areas on the front, shoulders and centre back which I’m happier with.

Another thing I like is the instruction to sew hems separately before joining the side seams. This sounds a small thing but because the hem is dipped and rises at the side seams it means you get a much neater finish at the side seams-genius!

IMG_3998
I sewed the sides with French seams so it super-neat inside. I’ve used contrast yellow on the hem too.

fullsizeoutput_1f1f
I’ve noticed I always wear my gorgeous ‘bee’ necklace from Alex Monroe with Imogen because the notch shows it off so well. I’m wearing one of my Zierstoff Gina skirts and you can read the blog about those here.

IMG_3708
Autumn leaves at Anglesey Abbey, Cambridgeshire.

My second version was made using the gorgeous coral lightweight linen I bought from Jules with the pattern in March.

 

I’ve made all my versions with the longer length sleeve with loose elasticated cuff, you could obviously make them tighter but I prefer them like this.

I wore the coral top to the Sewing Weekender in August and it got plenty of compliments (and obviously I told everyone what the pattern was, although several people recognised it straight away)

fullsizeoutput_1f2f
Hard at work (photo credit Charlotte Powell at English Girl at Home)

The jolly fabric for my newest version came from the swap hosted by The Foldline at the recent Great British Sewing Bee Live, it’s a sharp contrast to the plain fabric of the first two that’s for sure! Thanks Kate, hope you like what I’ve done with it…

IMG_3672
I look a bit crumpled after all that shopping and chatting at GBSB Live…I’ve made it to the cover of Love Sewing….well, nearly 😉

What I’ve loved about this top is how comfortable it’s been in warm weather, and the details are pretty but understated-a trademark of Sew Me Something patterns to be honest. I know I’ve made 3 but I reckon there’ll be more, it would be gorgeous in a silk chiffon or crepe de Chine, or fine wool challis for example. You could add a trim to the neck, in the seam perhaps or beadwork perhaps? This third version I’ve cut a little longer than the previous two simply because I had plenty of fabric. I’m going to layer it up in the winter with a long-sleeved tee underneath. Another thing I like about this brand is that the sizing is for real women and goes right up to a 22-not all independent companies have this range and I’m not sure why.  and that seems a shame.

fullsizeoutput_1f91
I lengthened this version by 4cms simply because I had plenty of fabric. If your fabric is wide enough to fold the selvedges to the centre it’s an economic way of cutting out, it also gives you the ability to line up elements of the print so they run pleasingly around the body (always a dead giveaway of cheap RTW clothes)

fullsizeoutput_1f9d
I finished the inside neckline this time with a bit of soothing slip-hemming.

IMG_4020
Number 3 finished!

 

I want to stress that I bought my own copy of the pattern and the fabric so any opinions expressed are entirely my own. I’m trying out a few trouser patterns lately (more on that to follow in a few weeks) so I’m tempted to try one of Sew Me Something’s trouser patterns in the future but there’s a long Autumn sewing list to work through before I buy anything more….famous last words!

Happy sewing

Sue