Fantail Top from The Sewing Revival

Janine at The Sewing Revival, the pattern company based in New Zealand, is gradually creating a growing collection of stylish patterns and there is something very appealing in their deceptive simplicity I think. I’ve made a few versions of several of them now, including the Sidewinder pants, the Bellbird top and the Heron dress.

When Janine kindly offered me my choice of the range to choose from I picked one of the more recent releases, the Fantail top. At first glance it appears to be a simple raglan-sleeved top but along with the high/low hemline and elasticated front hem it offers variations of scooped, ribbing or V neck, elasticated or ribbing cuffs, and the back hem can be finished with ribbing too.

I had a rummage in my stash for some suitable fabric, ideally something with a bit of drape works best so soft viscose, crepe, georgette or chiffon if you fancy a challenge, cotton lawn, wool challis or fine linen would all work very well. Light- or medium- weight jersey will make it into a very chic sweater. I’ve no idea where my piece of navy fabric came from, probably I was given it by an elderly lady because it had a little ticket pinned to one corner saying it was 1 1/2 yards x 54” wide and cost 90p! It certainly smelt a little bit musty so the first thing I did was give it a quick hand-wash, it turns out that the colour ran quite a bit and I was left with blue hands for several hours afterwards!!

The patterns are sold in size bands which each contain 4 sizes (there is some overlap between the brackets) and each band is layered which gives you the option to print only the sizes you want so I printed UK 10 and 12 because, having lost some weight recently, I wasn’t sure which size would be best. In the end I cut a UK12 and it looks fine I think, it’s a roomy style so I could possibly go down a size but as I’m one of life’s ‘fluctuaters’ where weight is concerned maybe I won’t.

I like the instructions on Sewing Revival patterns because they are well explained and illustrated with photographs. If you’re an experienced sewer like me then you won’t necessarily need to follow them closely all the time but I do keep half an eye on them so that I don’t miss a step or construct in the wrong order which might have repercussions later on.

I made the scoop-neck version with elasticated cuffs which is probably the most straightforward variant, the round neck is just the right amount in my view, not too wide, not too deep. Raglan sleeves are super-quick to construct, I usually sew the neck facing on after the shoulder seams and before sewing the under arm seams.

The front and back hems are very different lengths and finished differently so don’t rush through these elements. I ignored the suggested bias-binding finish on the back hem and used one of my favourite techniques of a pin-hem instead ( I wrote instructions for this last year in this blog post on hems )

The USP of this top is the deep partially-elasticated front hem. It looks great but it’s really not difficult to achieve. There are suggested lengths to cut your elastic for each size although you could use a shorter piece over the same length if you want to pull the front in a bit more. Or you could also use a narrower elastic but the pattern is cut for wide width like this so you may have to make an alteration to the hem depth accordingly for the channel to work.

This is the side seam where the two levels come together, make sure the back hem is fully enclosed within the front so there is a nice smooth line from front to back.
The finished top on the stand.
I sewed the deep elastic cuff version, there’s a subtle amount of gathering.

As I said, this is a simple top with eye-catching details, it’s probably a half-day project if you’re got everything you need when you start.

The sun came out so we headed out to the garden for photos. I’m wearing one of the pairs of Sidewinder pants I made in 2019, they are a bit baggy now.
There’s a nice dip to the hem at the back.

I’ve already got some fabric lined up for another Fantail hopefully very soon, a nice piece of soft viscose from Sew Me Something and ribbing given to me by my friend Kate which by sheer good fortune coordinates perfectly! There’s lots of possible variety with the Fantail, short sleeves is another for example.

Until next time, Happy sewing

Sue

Box pleat shirt from Trend Patterns

I’ve made loads of different clothes over the decades but actual shirts for myself have not tended to be among them. I’m not sure why, possibly because I had to wear boring school shirts for years and years, and for a while I had to wear a uniform when I worked for the John Lewis Partnership so my personal preference has tended to softer blouse shapes. That said, I love to see a crisp white shirt especially when it’s given an inventive twist. It’s a wardrobe staple and yet there’s always room for a new version. 

Lucy at Trend Patterns has just released the first 3 patterns of what will become a shirt collection and each is available printed, as a PDF or as a complete kit with pattern, fabric and trims. TPCSH1 is a feminine Pussy bow top with shirt sleeves and a ruffle hem, TPCSH3 has stunning gathered ‘angel’ sleeves which really make a statement whilst the body is kept simple and traditional so that the sleeves do all the talking. 

Lucy offered me the kit of TPCSH2 to try out, it is a box-pleated front shirt, deceptively simple to look at but those details take a little time to get right. It’s classified as ‘moderate/hard’ and I would agree, not because the elements in themselves are especially difficult but each of them needs some experience and precision to execute so I wouldn’t recommend this as your first shirt project. 

The kit comes with enough good quality plain white cotton poplin to make up to the largest size of a UK 22, along with Trend-branded buttons (a nice touch) and iron-on interfacing. All you need to provide is your own thread! 

I started off by taking my measurements and comparing them to the sizing chart, there is also a chart giving you finished garment measurements too which is helpful because it will give you some idea of how oversized the shirt will be when it’s finished. I made a UK 12 and as you will see from the finished photos it’s a very generous fit, to be honest, if you want a close-fitting shirt then this particular pattern won’t be the one for you. 

I opted to trace off the pattern, there are two separate fronts, right and left, and a whole back plus sleeves, yoke, cuffs and collar. There is no pattern piece for the bias binding for the sleeve placket, you just need to cut yourself two bias strips approximately 30cms x 4cms. The right and left fronts are the same except for the extra on the centre front which creates the folded fly with concealed buttonholes. I traced off one front then, to save some time and to ensure they were identical, pinned it to more spot and cross paper before cutting them out together so that I had a mirror version with the additional front added. It’s really important to trace the front very carefully because of the three box pleats, if they are each a bit off you risk the pleats not sewing together accurately which will leave you scratching your head. There are a lot of drill holes to mark the stitching which will eventually hold the pleats in place, don’t be tempted to miss any out because they are also really helpful when you’re folding and pressing the pleats in position. You could choose to trace just half the back to save paper if you intend to always cut it on the fold anyway but having a whole piece gives you the option to have the fabric out flat, besides, it’s almost always more economical to cut fabric out as a single layer [this can be especially helpful if you ever need to do some tricky pattern placement or matching]

Because the fabric is plain, placing the pattern pieces and cutting out was a breeze-no pattern matching, yay! I spent quite a while making traditional tailor’s tacks for every single one of the drill holes. You could use a washable or some other kind of disappearing marker pen if you are confident that it definitely won’t come back to haunt you but I wasn’t going to take the risk on plain white fabric! 

In the past I’ve occasionally found some of the earlier Trend instructions a bit tricky to follow but the more recent ones have illustrations rather than photos and I found this set very clear. My biggest piece of advice would be to read then re-read the instructions before you start, and to highlight anything that you know you’re going to have to really concentrate on, this isn’t a race after all. 

Constructing the fly front and button stand first, including the buttonholes, was satisfying, I often feel like I’ve run out of steam by the end of any project which requires buttonholes and it’s a bit of a chore by then but this gets it out of the way nice and early. [I should add at this point that I started out sewing with a fine size 60 needle so as not to leave too many noticeable puncture holes in the plain fabric if I went wrong or needed to unpick. However, this size needle kept skipping stitches for some reason so I went up to a 70 and had no further problems]

transfer all markings and instructions to the paper pattern if you’re tracing it off. I made tailor’s tacks through every drill hole

My second piece of advice would be to press your pleats on the ironing board if you possibly can. I only have a small heat-resistant board in Threadquarters which meant I was constantly moving the fabric which was not ideal, it was so much easier on the ironing board because the whole piece fitted on. Do not rush this part, with pure cotton fabric you can have the iron on pretty hot but do be careful of your fingers with hot steam. Pin, tack or Wonder Tape the pleats in position once pressed if you want to. 

pressing the pleats on the ironing board, the snips top and bottom along with the tailor’s tacks will help you get each one in exactly the right place.
In progress-making the bar tacks

The instructions are to stitch down each pleat according to the markings using a few stitches. I did quite a lot of testing using a variety of decorative stitches for this before I committed to the bar tack. The next challenge was getting each of those bar tacks (30 in total!) central over the pleat. My machine comes with a number of feet which are used in conjunction with the decorative stitches and one of these has horizontal red lines which proved very helpful in getting lined up for every bar tack. After making a few of these bar tacks I ‘got my eye in’ so I could tell very quickly where to start each stitch, having the needle stopping in the up or down position is an absolute essential feature on my machine for me and it was brilliant during this, being able to lift the foot to check I was sewing in the correct place without the work shifting was so helpful. The photos will hopefully make my method clearer to follow. It’s vital to take your time and be as accurate as possible during this stage because the box-pleats are the USP of this shirt and it will obvious if they are off-kilter. I sewed in white thread but you could use a colour, or even hand embroider to give your shirt a totally original look.

testing various stitches including triple straight stitch and arrow heads, the difficulty was going to getting every single one central over the pleat

Incidentally, Trend will be creating a series of video tutorials to help so I suggest you check their Instagram account or the website for those. Also, there was a slight problem with pattern markings for the back box pleat which were incorrect. This has been rectified but if you bought a copy very soon after release you might find you have to scratch your head a little, the notches were in the wrong places. Check the website if you’re in any doubt.

the right front, including the fly, taking shape
the shirt with the side seams now sewn up, ready for the sleeves to go in
sewing the continuous binding to the sleeve opening. the instructions don’t call for it but I like to sew across the top of it at a 45 degree angle to encourage the binding to stay on the inside
close up of the finished front
all done
close up of the finished bar tacks

I followed the order of construction to complete the shirt (I usually do the first time I make a pattern) but personally I would put the collar on after making the yoke. I like to do it before the side seams are sewn up or the sleeves are inserted, unless there’s a technical reason not to obviously. 

the finished back yoke
I popped a bar tack in the middle of the back to hold the pleat in place, this hadn’t had a proper press yet

Everything came together really well, I’ve always found Trend patterns are accurately drafted so I know the pieces will go together well without major discrepancies-this is why it’s so important to trace off carefully if it’s your preferred method, if seams or notches don’t match up you won’t know where the fault lies [the same applies to accurate cutting out too] 

The sun came out so we could take some outdoor photos, I’ve paired the shirt with my much-worn Megan Nielsen Ash jeans
is it a bird? is it as plane?…
I’ve pressed the pleat now

Clearly not everyone will want to make a shirt that is going to take a sizeable amount of time to construct, or to launder afterwards for that matter, but if we only made simple loungewear for ever then the art and skill of making our own clothes will be lost, just at a time when so many people have discovered, or rediscovered, the joy of sewing for themselves. There will always be a place for a classic white shirt and Trend has created a small but growing collection with original twists on the genre. The last year has been so tough for small business owners so I really appreciate being given this kit to try out, I wasn’t under any obligation to review it other than share some photos but personally I have no problem with sewing and writing about it. I will always try to give you a balanced view and if I can support a little business by giving them some positive exposure then I will. Alongside that I’m keen to demonstrate that a design-led style doesn’t have to beyond us ‘ordinary’ sewers either, if you like it then sew it! 

I hope I’ve given you some idea of what will be involved in making the TPCSH2, if you’re looking to push your skills on a bit this could be a good project. Maybe you need/want a plain white shirt in your wardrobe [amazingly I didn’t have one in mine, just a couple of short-sleeved ones] I might layer this with a sleeveless tank top over it, or a waistcoat could look interesting. This is a typical cotton poplin shirting but you could use a variety of fabrics, you could have fun with graphic prints or stripes, try something soft like double gauze or a crisp linen? Or what about harvesting the fabric from several well-worn mens shirts to make a more patchwork look. Take your time though and enjoy the process.

I’ve got a long-sleeved T-shirt under it because it was a chilly day and it will be perfect for the day I can return to the V&A. I don’t know about you but I’ve really missed putting an outfit together to go on a nice day out, deciding which of the lovely garments I’ve made that I want to wear and how I’m going to accessorise them. It seems such a small silly thing to miss but I shall be so glad when I can start doing it again.

Most of all, thank you to Trend for giving me the opportunity to try the kit, until next time,

Happy Sewing

Sue

The Sewing Revival Heron dress hack

Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…

wearing the blouse on my trip to Paris for the Sewcial in May 2019
my very first version of the Heron dress…it has pockets!

While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.

All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.

Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.

Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.

I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.

And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.

I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.

I grabbed a cheeky selfie in John Lewis with my sewing friend Ruth in the autumn, we can only dream of when we can meet up again at the moment though sadly. that’s my upcycled jeans jacket I’m wearing

The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?

Until next time, happy sewing

Sue

Sewzine- a new independently published mini-mag

Just before Christmas I was contacted by founder and editor Jillian Bagnall and offered a complimentary copy of her new, independently published sewing-based mini-magazine called Sewzine to review. I didn’t know what to expect, initially I thought it was an online print-at-home publication but I have been very impressed because it is a nicely produced print magazine on quality paper and with high production values. The graphics are clear and appealing and there’s plenty of attractive photography and illustrations for each article, plus, because it’s been independently published, that means there are no adverts to take up space, it is all content.

the cover of the first issue of Sewzine, the leading article about bra-making features on the front

Let’s take a look at a few of the articles inside…

I have to admit that bra-making is something I’ve never been very tempted to try, I’d rather leave that to the experts, but I thought the article was very well written because it gives a balanced view of why it’s worth considering making your own bras, or why it might not be for everyone, I was almost persuaded! I thought the information contained in the piece would be extremely useful if you’re about embark on bra-making, including lists of patterns, materials and findings that you would need, where to source them and a tick list to fill in as you collect them together.

I found the article about wool and woollen fabrics really interesting and very well researched, there was all sorts of information about the various sources of woollen fibres and types of fabrics. Like the bra-making article it was well-illustrated as well.

I had a chuckle at the “Bring it Back?” article because I spent so much of my early career cutting and making puffball, or ‘bubble’, skirts. I enjoyed the exploration of the style from its early days to more recent incarnations, I can see this as a thread of articles revisiting other iconic styles in the future…hot pants anyone?

I also really enjoyed the idea of revisiting patterns from a year or two back to reappraise them. We are constantly bombarded by new new new patterns but I’m always happy to reuse patterns I’ve enjoyed making previously. By chance, the pattern featured in this issue is the Grainline Patterns Farrow dress which I’ve actually made 3 times myself, including one review that featured in Sew Now magazine.

The mini-mag is aimed at intermediate sewers but I think this shouldn’t put off less experienced makers. I enjoyed the chatty yet informative style of writing and a lot of time and effort has gone into the inaugural issue, it’s clearly been a lockdown passion project. There are no free patterns or other inducements as an incentive but that does mean that the editorial is unbiased so if you are intrigued to have a read for yourself then follow the link here to the Sewzine website where you can order a copy of the first issue for yourself (it’s priced at £5.75 per copy) Jillian would also welcome any ideas you might have to contribute articles for future issues, contact her via sewzine@gmail.com While you do that I’m off to have a go at the crossword…

Until next time, happy reading

Sue

2020-Sewing in a Time of Pandemic

Well what a year 2020 turned out to be!

It’s been such a tough time for so many and being a part of the wider sewing community has been a very real lifeline for many people. Those of us that enjoy making our own clothes already realise the obvious benefits this can give us; total freedom to choose types, colours and patterns of fabrics as we wish, the ability to emulate high-end or high street fashion at the price-point we can afford and the skill to make clothes fit our own particular body type, to name but a few. It shouldn’t then come as a surprise that the wider world, whilst searching for activities to entertain and occupy them during the long weeks and months of lockdown, discovered (or rediscovered) that home sewing can be creative, absorbing and rewarding which is a VERY GOOD THING! Who knew there was a link between doing a creative activity and a more balanced sense of well-being??

To be honest it doesn’t matter what that activity is, or whether you’re really any good at it, the fact that it can take your mind away to other less stressful places for a time is what matters.

But at the start of the year none of that was of much interest to most. I was extremely fortunate in January to go on a cruise to the Caribbean so I made a couple of new things to fills ‘gaps’ but mostly I took old favourites…cue multiple photos of 3 versions of The Maker’s Atelier Holiday shirt on heavy rotation! One new item was the Trend Square dress I made in fabric given to me by Dibs from Selvedges and Bolts the previous year, I got a lot more wear later on in the summer.

Within a couple of weeks of getting back, Judith Staley and I hosted the very first Sew Over 50 meet-up in London. We very much hoped, and expected, that it would be the start of many more such meet-ups between followers of the @SewOver50 account all over the world but it wasn’t to be…not yet anyway.

If you’ve been reading my blogs for a while you’ll know that as well as meeting up for sewcials with fellow sewers I really enjoy my visits to exhibitions and galleries. At the end of February I caught up with Janet Poole who is a fellow Lamazi blogger at the Stitch Festival in London, I had such a lovely day shopping and chatting with her, and her friend Great British Sewing Bee winner Juliet too. We didn’t realise it then but we were very fortunate to be able to attend the event at all and I wouldn’t be surprised if others who went didn’t catch the-virus-that-shall-not-be-named because it was so crowded.

About a week after this I was able to go to the stunning new Kimono show at the V&A and, although we didn’t know it at the time, that was to be the final outing for several months…

I wore the new Homer & Howells Cissy dress (and failed to remove my coat from shot which I chucked on the floor!)

So then we entered the first long lockdown and that’s when sewing (and some baking) became my primary occupation. During this time I had some blogging commitments for Simple Sew Patterns and Lamazi fabrics to complete. For my first Lamazi post I made a Trend patterns Bias T-shirt dress which was a tough make, not because the pattern was difficult but because I was making the dress for a wedding that never took place. And worse than that, I was making the Bride’s gown too so I still have an almost-finished dress waiting for the day that the wedding can happen.

In all honesty I hated how I looked in this dress because I had piled on weight and felt very self-conscious in a fitted dress. It was a lovely pattern made in beautiful fabric but I felt I was doing both a disservice. Eventually I did wear it in September by which time I had lost weight and it was a delight to wear! I’m sure I’m not the only one whose state of mind has fluctuated wildly this year and my self-confidence was rockbottom when this picture was taken.

I know I’m very blessed in that I have little to actually complain about in my life but that does not mean that these months of lockdown didn’t take their toll mentally so, when the call to help make scrubs came, it was something I could actually do! Eventually I made 10 sets, I believe they were headed to a maternity department in a London hospital.

I continued to keep busy by doing a few refashioning projects because the desire to make new things that weren’t going to be worn outside the house was just too depressing. I love the act of making clothes, the planning, the cutting out, the sewing, because that was taking my mind off what was happening in the real world but how could I justify making new clothes that I had little use for? Even dressmaking was starting to become a negative because I felt guilty about it. By doing some refashioning projects using things I already had, other than new fabric, I made a few items including pyjamas for my final Simple Sew post and another pair using the PJ pattern in the Great British Sewing Bee book written by Alex and Caroline of Selkie patterns and for which I had made a couple of samples. I used 4 old work shirts of my husband’s which were very well worn! I also made (eventually) two pouffes as well which took care of loads of scraps and off-cut furnishing fabrics and were extremely satisfying! I also refashioned a very old and redundant heavyweight cotton curtain into a Dawson coatigan by Thrifty Stitcher.

Early on in lockdown I had the pleasure of talking to Maria Theoharous for her Sew Organised Style podcast on a couple of occasions. I’ve set up a separate page so you can access this to be able to listen to her inspiring SewOver50 guests every week. One of our chats revolved around how we each arrive at our fabric choices for specific purposes or projects, I wrote this topic up as a post which you can read here, and I also wrote a further post which came from when I was guest editor on the @SewOver50 account and we talked about our cutting out processes-did we cut and make one thing at a time, or cut several things and have multiple projects on the go? Scissors or rotary cutter? Pins or weights? It was wide ranging and fascinating with so many excellent ideas and practices. I hosted another discussion about a variety of hem finishes later in the year and you can read that one here. Incidentally, by the end of this year @SewOver50 has reached an incredible 25,600 followers!!

One of my stranger tasks this year was to carry out a socially-distanced dress fitting on a doorstep! Before lockdown started I had been commissioned to make a dress for a work colleague of my daughter Katie. Thankfully I’d opted to make a toile of the bodice which I’d fitted just before lockdown kicked off so I managed to get the dress to a good stage of completion. However, I got to a point where I definitely needed her to try it on because even if she couldn’t wear it for the event she had hoped to, it would be nice for her to take delivery and wear it around the house!! So I went to their place of work and handed the dress over at arms length to Tracey to put on in the staff toilet, then she came out onto the porch where Katie, under my direction, pinned the dress for me. I took a few photos for reference too. From that I was able to finish and deliver the dress and my client was delighted with it…phew

One of the regular sewing highlights of the last 4 years for me has been the Sewing Weekender which generally takes place in Cambridge, UK in August. The organisers took the bold decision to put the whole event online instead which meant that many more people could ‘attend’ from all over the world. Myself and Judith Staley were delighted to be asked to contribute a video message each which was very nerve-racking but it turned out alright in the end. I published a transcript of mine here, along with the original video (you’ll notice that I had abandoned my signature pink hair by this time because, quite frankly, what was the point of bothering!) The Online Weekender also raised a significant amount of money which was divided between 4 charities. 

As lockdown started to ease in the summer I was able to get out and about a couple of times. I joined an al fresco rag-rugging workshop in Hertfordshire run by Elspeth Jackson of Ragged Life which was so enjoyable, and I visited a couple of exhibitions in London including the Kimono show again, plus Andy Warhol at Tate Modern and Tricia Guild at the Fashion and Textiles museum both on the same day. Since then though things have been shut down then reopened, then shut down again. My heart goes out to everyone who is trying to run a business or an organisation that relies on visitors through their doors to make them viable, their future is very uncertain.

I’ve made a few other garments during the autumn which I’ve been really pleased with including the Prada-inspired shirt dress and a pair of Utility pants by Trend Patterns (not blogged yet) but I feel I’ve run out of steam with my sewing right now and I never thought I’d say that. My own teaching classes restarted for a total of 5 weeks in October but they’ve stopped again. I know some have adapted by using Zoom or other platforms but it just wouldn’t work for me, I feel dressmaking is too hands-on and needs real assistance for tricky bits, holding things up to the camera isn’t good enough sometimes. And being part of a group and all that shared enjoyment is a huge part of it too. I’ve had fairly regular online catch-ups with some of my lovely sewing friends and that has been a joy, albeit not as good as seeing them in the flesh.

Mr Y was the lucky recipient of a few handmade garments too during 2020 when I made him another two Kwik Sew 3422 shirts, and not one but two Thread Theory Finlayson sweatshirts! I’m happy to say he’s delighted with all of them and I’ve got plans for another sweatshirt for him in the new year.

I’m working on my own pattern which I’ve self-drafted so hopefully that will be something positive for the new year but I need occasional assistance from more expert friends and that’s making it a drawn-out process which would have been so much more fun person-to-person.

One final project I was commissioned by a friend to make was a Christmas chasuble for her to wear as she presides over her Christmas services in church. A chasuble is essentially a fancy poncho which the priest wears over their other vestments and Wendy wanted me to create one with a Nativity scene on it. She sourced the base fabric with my advice, and a printed quilting cotton Nativity which was sent from the US. This was square so I carefully cut it into approximate thirds with the central third featuring the stable scene and the star for the front, another third with Bethlehem for the back and the remaining third I cut into two parts to use on the stole, which is the long scarf priests wear around their necks. All of these I attached by appliquéing around the black outlines (I was literally making it up as I went along!) Wendy is delighted with the finished result (thankfully) and I’m sure she will enjoy using them during the Christmas season.

As I finish writing this (2 days before Christmas) we have no idea what lies ahead…some countries seem to be slowly recovering whilst the UK as a whole seems to be sliding further and further into disaster, or maybe not? I should try to think more positively as scientists have worked tirelessly to make a vaccine which will gradually be rolled out. Personally I’m a long way down the list for it but that’s absolutely fine, we must protect the most vulnerable first.

I’m making an effort to look cheerful in this most recent Lamazi blog make, but the wine was slightly off watered down Rosé from my daughter’s fridge and it was 10.30 in the morning! I’m genuinely pleased with the dress though and in spite of everything I’ll wear it on Christmas Day because there’s plenty of room for expansion!!

This has probably ended up not being a-not-entirely-coherent post but that’s kind-of appropriate I reckon! Wherever you are and whatever the new year brings for all of us I’d like to thank so many of you for reading my posts, sending me lovely or encouraging messages. Being a part of the online sewing community and Sew Over 50 in particular has been an absolute joy and a lifeline at times. We need to lift each other up more often, call out injustices when we see them but not to the extent that it becomes bullying of individuals, that isn’t right either. 2020 has been a year of huge upheaval, I plan to restart 2021 with fresh sewing plans to help me to feel more positive about it…it’s going to be a bumpy ride!

Until next time, stay safe!

Sue

a multitasking Festive outfit

The Festive season is often a reason to make, or buy, a special new outfit to wear for office parties or Christmas Day but this year’s Festive season things will be very different for most of us. I don’t want to be entirely negative though so, as part of the Lamazi blogger team, I thought I’d make something which is a little bit Christmassy but will double up as a ‘regular’ winter dress too. 

I’ve chosen the cord velvet from Danish Design in a gorgeous shade of aubergine-I’m always a sucker for purple-but it comes in several other beautiful rich shades including a sumptuous gold and a stunning teal too. I picked this fabric because it’s a medium weight stretch jersey and has soft pile which makes it lovely to the touch. I’ve made a dress but you could easily make tops or wide-legged pants in it, or babies and children’s clothes too because it’s washable and crease resistant. 

Whilst I love a complex make to really get my teeth into I felt this wasn’t a garment which warranted lots of time. Making a special Christmas once-worn garment wasn’t appropriate any longer so I wanted something quite simple but adaptable and for that reason I’ve picked the Somerset T-shirt by Maven Patterns. I’ve made a few of these now, the bones of it are beautifully simple, it has a self-neatened bateau neckline, a slightly fitted silhouette and four sleeve options. I’ve chosen the Bishop sleeve with a long cuff but I’ve hacked the sleeve to make it even fuller, and I’ll lengthen the body to create a dress finishing below the knee.

Another idea was to add a flared skirt which looks nice but didn’t think I would use it as much as the straight version.

The Somerset has excellent very full instructions with lots of tips and advice to get a good finish. There’s a useful sheet to write all your information including body measurements and fit alterations, and a fabric stretch gauge to check you have enough stretch for the pattern to fit properly. You can also list the needle type and size you’ve used, stitch type and length and anything else you might want to remember for another time. 

To increase the size of the sleeves I took the bishop sleeve pattern and drew 5 vertical lines from each of the notches from shoulder to hem. Each segment will become slightly wider as it gets nearer the bottom edge so make sure they are even in size.

Cut a piece of spot and cross or tracing paper bigger than the pattern as it is, mark a grainline running right down the paper and then lay the pattern piece on top of it, matching the grain on the pattern to the grain line you’ve just drawn. Next, I carefully cut up to the top of the marked lines taking care not to snip right through at the top, keep it attached by a tiny amount to act as a pivot point. [If you don’t want to cut your original pattern piece I suggest you trace off a new one to use instead] Then you splay the hem edge apart by a few centimetres each, I added 2.5cms between the each of the ‘side’ segments and 5cms to the central one. By doing this you’re adding fullness at the hem but not altering the sleeve head. You could put additional fullness to the sleeve head by opening the top edge too if you wanted. I lengthened the sleeve by 5cms too so that it would have plenty of blousy fullness into the cuff. 

Trace around the new shape using a tracing wheel or pencil and cut out the new piece transferring all markings. One final change I made was to add a bias grainline because I knew I wanted to play with the stripe direction of the rib on the fabric.

I had pre-washed my fabric and partly tumble dried it on ‘low’ before letting it dry completely on the clothes airer, it seemed to survive the experience just fine. 

I made an arbitrary choice of how long to make the dress by simply holding the tape measure at my shoulder and seeing where it came to at about mid-shin! I attached another piece of spot and cross to the bottom of the front and back pattern pieces and drew on the skirt length I wanted, plus a generous hem. I knew I would have to make some adjustments to the hip and thigh during the fitting stage, just make sure that the hip and thigh measurements are plenty big enough because you can always remove some, it’s much harder to add later! 

The ‘cord’ runs across the width of the fabric and I wanted the rib to run down the length of my dress which meant I had to fold the fabric across the width. Try not to twist the fabric if you have to fold this way, I marked a single rib by following it across the width with pins so that I can see it clearly. Fabrics like corduroy, velvet or velour have a pile or ‘nap’ which will shade so if you cut some pieces facing one way on the grain and some pieces running the other way then you will end up with a garment that looks like it’s been made with two different colour fabrics, even though you know that isn’t the case. If you’re unsure what quantity of this type of fabric to buy go with the ‘with nap’ amount on the pattern information and follow the one-way layplan to cut out.

I marked the rib across the fabric with pins so that I could be sure it was folded correctly and would not be twisted.

Once I’d cut all my pieces I followed the making instructions which are very comprehensive. If you have a walking foot for your machine I strongly recommend you use it because velour like this has a ‘pile’ and has a tendency to ‘creep’ as you sew so you might find that it starts off with all the edges matching but by the time you get to the other end the two fabrics are no longer matching. I also strongly recommend you tack any seams you are unsure about. You could use a million pins but by the time you’ve done all that you could have basted it in place which does the same job and usually more effectively. I was able to coverstitch the neck and the skirt hem on the Pfaff Coverlock 3.0 I have on loan as a brand ambassador but it works just as well by overlocking the raw edges and twin-needle stitching them down, or zigzag and twin-needle, or two rows sewn singly if you don’t have a twin needle. When it comes to pressing a fabric like this, if you don’t have a special needle board (and few of us do) then you should press on the reverse at all times. You could place a towel on your pressing surface and lay the fabric on top so that the pile of the cloth is against the pile of the towel which will help protect it. Use a pressing cloth as well. These tips will also apply to regular corduroy or any non-stretch fabrics with a pile too.

The bell of the sleeve is gathered using shirring elastic which helps to retain some of the stretch required for the cuff. 

Once the sleeves were in I sewed up one side seam directly on the overlocker and then pinned the other side seam to fit myself. This was because I didn’t know if I’d need a split at the hem to be able to walk in the dress and I didn’t want to end up with loads of unpicking!

First I tried it right side out to get an idea of how it was fitting initially, then I turned it inside out to pin.

I looked at the fit in the mirror first of all and the sewn side seam was quite wavy, this could be cured by either adjusting the differential feed on the overlocker so that it doesn’t happen, or you could stitch the seam on the sewing machine and then overlock the edges [This is what I opted to do because I could see I had to take a fair bit off the side seams anyway to achieve a fit I was happy with] Then I put the dress on inside out in front of the mirror and pinned out the excess. I turned it right side out and tried it on again to check the fit, then finally sewed both side seams on the sewing machine, I used a ‘stretch’ needle, a ballpoint or jersey needle performs the same task. Either use a short straight stitch or a straightened out zigzag, make some samples to see which works best for your particular fabric. 

Now I tried it on the dress inside out to adjust the seams
I pinned out a fair bit of the side seams to give more shape through the waist and hips.
still Inside out
Finally I put the pinned dress back on the right way around to check I was happy with the fit before making the adjustments.

Lastly, the cuffs go on and the skirt is hemmed. 

And that’s pretty much it, it pops straight over the head so no tricky closures, because of the stretch it didn’t need a split, and that means there’s room for Christmas lunch and it won’t look like a dish rag after spending the afternoon curled up on the sofa watching Christmas telly!

cheers!
I’ve dressed it down with an ancient knitted gilet plus a wide belt, long boots and my much loved Alexander McQueen scarf
I love a scarf to keep my neck warm!
It could be the strangest of Christmases but let’s raise a glass to a much better 2021

I have to say that I’m really happy with this dress because it ticks all the boxes I wanted it to. It’s comfortable but it looks Christmassy, it looks great with opaque tights, heels and jewellery, but also with boots, a chunky belt, a roll neck top underneath for extra warmth or a cosy scarf…and did I mention it’s comfortable! #secretpyjamas It also has the advantage of rolling up and going in the corner of a bag or suitcase and coming back out again not needing a press. Bonus!!

If you have a favourite T-shirt pattern you could try lengthening it into a dress, Tilly and the Buttons Tabitha from Make it Simple does that. You could browse the SewOver50 post I wrote listing loads of go-to T-shirt patterns for inspiration, or maybe copy a RTW one you already have?

At 160cms the fabric is very wide so a little will go a long way, and because it’s so soft it would be lovely for children’s wear too. It needs a little bit of careful handling but a lot of that is in the ground work. Make sure you lay it up and cut it accurately to minimise unnecessary stretching or distortion (try to keep it flat on the table or lay it up on the floor) pin or tack the seams so they don’t move about and press carefully as you go and you should be fine. 

It’s been an incredibly tough year for so many and I wouldn’t blame you for not feeling like making anything new to wear. However, if crafting and creating bring you joy and respite then you could view it as a gift to yourself, and when you choose to buy from small companies like Lamazi and Maven then you are helping them too.

Thank you to Lamazi for providing me with the fabric for me to write my review, and I hope you find it helpful. 

Until next time, Happy sewing

Sue

Prada-inspired shirt dress

This whole project all came about because I couldn’t resist some ex-Prada fabric I spotted on my friend Dibs’s website, Selvedge and Bolts! She specialises in sourcing gorgeous quality high-end and ex-designer fabrics from Italy and France. This one caught my eye because funnily enough it doesn’t scream ‘designer’ but I liked the graphic print which stands out amongst so many florals.

I ordered 2 metres although I didn’t have a plan for it, then it occurred to me that I should look at actual Prada designs to see if there were any that were at all wearable by someone like me (ie. not six feet tall or looking about 17 years of age!) Somewhat surprisingly there were some really lovely shirt-dresses in eye-catching fabrics.

This was just the springboard I needed so, after a bit of a search through my patterns, I found this McCalls 7470 which had originally been free with Love Sewing magazine at some point in the recent past. The Princess seam lines and shirt styling were exactly what I wanted except I would change the skirt to be a dropped waist dirndl to echo the original.

The #7470 is a Palmer Pletsch fitting method pattern which I’ve never attempted before. I’ve been thinking lately that many of the garments I’ve made in recents months have either been old favourites or very simple shapes with little use of interesting techniques or style lines. I needed to stretch my sewing muscles a bit more-use them or lose them-so I set about following the instructions to tissue fit the bodice first. By a combination of body measurements, knowing my body quirks, periodically trying on the pinned tissue and using my padded-out dress stand Doris I arrived at a fit that I was happy with.

I’m not going to claim it was particularly easy but there are a lot of written instructions on how to approach it on the accompanying sheets to help you, plus online tutorials too. I’d recommend making a toile (or even two) if you need to before using your fashion fabric to avoid expensive mistakes.

I knew fairly early on that my 2 metres of fabric wouldn’t be enough for what I had in mind, and I didn’t want to waste my lovely Prada fabric so I opted to make the pattern instead in a vibrant printed stretch cotton which I’d bought in Paris at last year’s Sewcial event.

I took my time sewing the dress, I wanted to enjoy each part of the process. There is a two-part collar for example, pleated patch pockets with flaps, and a band running right down the front. I had a few problems with insetting the sleeves though. I’d made a small alteration the back of the arm scye which resulted in it getting a little smaller so I expected there to be a discrepancy but it was much bigger than I anticipated, the sleeve head was far too large and wouldn’t fit without puckering and gathering. I looked at a few examples of #7470 on Instagram and many versions were either sleeveless or didn’t mention it as a problem. Anyway, after a lot of fiddling about in the end I dropped the arm scye down to make it larger so that the sleeve head fitted properly.

The skirt was simply 3 rectangles, two for the front and one for the back which I pleated onto the shirt top using a fork to make each pleat even.

I used some plain white cotton scraps to make a faced hem.
I joined them into a long strip, folded lengthwise to about 5cms in width.
It was sewn onto the hem, all raw edges together.
At the centre front I enclosed it within the band for a neater finish.
the turned centre front band
the final stitched hem-it needs a good steamy press here. You can read more about hem finishes in my recent post here.

So what started as a Prada-inspired dress for one fabric has still ended up as a Prada-inspired dress but made in a different fabric! I finished the whole thing off with these beautiful buttons from Textile Garden all the way down the front.

the buttons look great
I love the detailed pockets too.
the collar is nice and crisp
the sleeves are two-part with a deep cuff
Yup, I’m happy with that!
I would have added a self-fabric belt like the Prada original but there wasn’t enough fabric left, just scraps.

So that’s my Prada-inspired dress up to this point, just not made with actual Prada fabric. I have a plan for it though because there was another shirt-dress that caught my eye…

I love the idea of a completely different fabric for the sleeves and the back
The front isn’t as I’d want it but I really like how the sleeves are such a contrast.

I’m really pleased with the outcome and the way it fits, and because I took my time and didn’t rush, it was an enjoyable process. I’d fallen into the habit of making simple projects, I felt something more complex was needed.

Until next time, happy sewing

Sue

A few hem finish suggestions-a Sew Over 50 topic

Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.

Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.

I’m beginning here with a faced hem…

This was the hem of the first Refashioners project I attempted. It was a jacket made from two pairs of my husband’s old jeans and because I wanted to use as much of the reclaimed fabric as possible I cut shaped facings for the lower edge. As you can see I also finished the edge with bias binding I made from offcuts of dress fabric.
The inside of the finished jacket looked like this. I understitched the lower edge of the facing to help it roll better and also slip-stitched it in various places including the seams and pocket bags to secure the facing without the stitching showing on the front.
This is also a much more shaped facing on the hem of Tilly and the Buttons Orla blouse. This can be a beautifully neat finish on a curve, it gives some ‘weight’ and crispness to the hem too and makes it less likely to curl upwards on blouses for example.
This Orla blouse was from 4 years ago, I like the exposed zip in the back too (the instructions for putting it in were excellent if I remember correctly)

The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.

Helpfully, my fabric had horizontal stripes, some opaque and some sheer so I started by placing the crin on the front of the fabric and lining it up with the bottom edge of an opaque stripe. It is stitched on very close to the edge being careful not to stretch the crin as I sew, it’s important it lies flat. By sewing the crin onto the right side of the fabric when you flip it to the inside the raw edge of your fabric is enclosed underneath. To be honest I was making up the method as I went along because my experience of this technique previously came from altering wedding dresses which used it so this isn’t foolproof. I would strongly advise you to try a few samples first so that you have the version which looks best for your particular garment. [the eagle eyed amongst you might notice in my photo that I’ve sewn the crin to the wrong side of the fabric! I obviously did it and photographed it before realising what I’d done. As this was four years ago I don’t have any other photo!]
Once the crin is turned up to the inside I slip-hemmed it by hand, it looks a bit messy on the inside because the black shows up but it’s absolutely fine on the right side.
the finished dress, it’s one of my favourites I’ve ever made, and it’s a partial-refashion too because the velvet bodice used to be a skirt!

If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.

The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.

Sew the binding on very close to the raw edge, this was a Simple Sew Lizzie dress
Here I made my own binding which is first sewn on with a 5mm seam allowance and then understitched which is what you see here. I made this Grainline Farrow dress for a magazine review
The hem is turned up and I’ve slipstitched it in place by hand.
This is the same technique with ready-made bias binding.
the finished skirt.
My final example is the little christening gown I made from a wedding dress.

If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.

This is one of my variations on the Camber Set
I roll-hemmed a straight strip of fabric here which I then pleated onto the sleeve using a fork!
I roll-hemmed a straight strip top and bottom and gathered it onto the sleeve here.
An extended length sleeve on the River pattern from Megan Nielsen, roll-hemmed and elasticated

I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.

Using strips of iron-on interfacing to stabilise the area where the cuffs fold up
This is felted-type woollen fabric where hand stitching is unlikely to show through but if you have a finer fabric I would make the interfacing strip wider so that I then caught the inter with my stitches and not the fabric itself. See the next photo to explain this better.
You can see the interfacing is above the hem line here and I’ve herringbone stitched it by hand. You can also see how I’ve created a chain link to anchor the lining to vent opening on the back of the skirt.
the hemming stitches aren’t visible from the outside using this technique.

For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.

If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.

Personally I always think the stitches show a bit too much no matter how hard I try to get them really tiny. It’s very easy to catch a bit too much fabric, or none at all! In truth I probably don’t practice enough!!
This Regatta dress from Alice & Co was an ideal application because the skirt has a straight, unshaped hem.

I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.

the binding is sewn on the inside first
the binding then flips to the outside to become visible.
This dress was made for the Simplicity pattern hacking challenge last year
Instead of the usual hem on this dress I created a casing which I threaded elastic through.

I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.

the hem from the inside
the finished hem from the outside.
the finished dress, I was off to a wedding!

The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.

Inside the hem the corners are mitred.

Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.

Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.

turn stitch and trim
make another narrow hem, stitch a second time on top of the first line. Press. There will only be one row of stitching visible on the outside.

If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.

attaching a band to the hem.
The finished dress (worn with walking shoes during lockdown!)

This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.

I put a piece of Stitch and Tear behind the fabric as I sewed.
It looked like this after I finished
It will look like this on the reverse.
gently pull away the backing and then carefully snip off the excess fabric up to the stitching line.
Eventually the hem looked like this, the sleeves are trimmed with Broderie Anglaise

I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…

I had some narrow strips of white cotton lawn lying around so I joined them to make a piece long enough to go around the whole hem.
I folded the strip lengthwise.
attach the strip to the hem, raw edges together.
I understitched it, plus there’s a band on the front which is what you can see folded over in order to enclose the facing eventually.
The band folds back to enclose the hem facing.
There’s a little bit of puckering on the reverse here but this is invisible from the front, a good press will sort that out.

To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.

Stitching the hem with the overlocked edge rolled to the inside.

This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.

the bias strips were applied right side to wrong side on the shorts hems.
the bias strip is on the inside at the moment
It is then turned up to the outside where I trimmed and stitched it with ricrac braid.

I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!

Until next time, Happy Sewing

Sue

Two years of Sew Over 50!! (where did that time go??)

So, here we are TWO YEARS on from the first SewOver50 post, on August 18th 2018, and the account now stands at nearly 21K members worldwide! 

Personally, I’d really like to thank Judith and Sandy for the amazing amount of work they undertake so graciously in order to steer the Mothership through some interesting and turbulent territory, especially the second half of these last twelve months. 

We were all trundling along in our own way when suddenly, in early 2020, the world went very weird indeed. As the impact of Covid-19 started to take effect many of us were locked-down at home, some still working but in a whole new way, reliant on technology to carry on, it was an extremely stressful time for many who could have no contact with their loved ones or friends, lots of sewing-related events we so enjoy were cancelled or postponed. Many of us found that our sewing and creative making was a safe haven amid what was going on around us. For example, did you make a pouffe? I had the luxury of being able to sew whenever I wanted, because I couldn’t go anywhere, and I noticed others embarking on this project so I took the opportunity to use up SO many scraps of fabric and stuff them all into a footstool, I made my own pattern but I know many of you used the ClosetCore free pouffe pattern. I know many others couldn’t sew as often but, from chatting with friends, the time that they were able eke out to sew was vitally important to them, helping them to de-stress and shift their focus for a while. Shopping for fabrics, patterns and haberdashery online became a way, almost the only way, of supporting some of our favourite businesses, as people found new ways to adapt and do business. Sales of sewing machines worldwide increased exponentially with many manufacturers and retailers struggling to keep up with demand. Some of us had sewing sessions with our friends via Zoom, which was occasionally technologically-challenging but it enabled us to be in touch with each other whilst participating in our shared interest. I’m not going to dwell here on the pandemic though because it’s been different for all of us, sewing and being in touch with my sewing friends around the world has been an absolute lifeline for me personally. In fact, rather than watching the all-too-overwhelming daily news stories, it’s enabled me to hear and appreciate what people I feel I’ve come to know have been going through. At one stage it seemed anyone who was able to was using their sewing skills to help with the desperate shortages by making scrubs here in the UK, and possibly elsewhere, and mask-making has become something that people with little previous sewing experience have found themselves being able to contribute. Face coverings have become compulsory in many places now so this will be an ongoing activity in future.

Moving on, as a group @SewOver50 has always strived very hard to be inclusive of anyone who wishes to follow along, after all, part of the reason it started in the first place was because we felt somewhat excluded from sections of the sewing community by virtue (?!) of our age. Following the murder of George Floyd in the US we were all called to question the part we play in our world, even within our sewing community we had to examine our consciences to ask if we were doing enough. #BlackLivesMatter was rapidly followed by #BlackMakersMatter and there is now an Instagram account @BlkMakersMatter where you can see, and follow and support, the massive diversity of BIPOC makers, and not just sewers but crafters and makers of many beautiful things. Many of our wonderful stalwart SewOver50 followers including Diary of a Sewing Fanatic are vocal advocates, I’ve always got time for Carolyn’s no nonsense plain speaking! We shall endeavour to continue reflecting our membership, and involve a diverse range of contributors and guest editors in the future. If you have ideas for future topics, especially if you think we’re missing something important, do please let us know.

So, very briefly, that’s the worldwide picture (as it currently stands) in which there have been quite a few SewOver50-related things going on during the past 12 months too. My personal favourite was our very first, and fortuitously timed, official meet-up in London in late February. Judith was able to join me to co-host and I was thrilled that so many generous companies large and small sponsored prizes for the charity raffle we held. I think, without exception, everyone who attended enjoyed themselves and agreed we would have liked even longer to chat and create new friendships in real life, just weeks later the event couldn’t even have happened. We had high hopes of more of you being able to host your own meet-ups where ever you are in the world but that’s still not really possible, make sure you let us know if you do manage it! Above all though, stay safe! 

still no luck for Judith using my homemade teleportation device…must try harder

Stalwart supporter Maria Theoharous in Sydney started her own podcast Sew Organised Style in September 2019 and she generously created a space for Sew Over 50 every Thursday! Judith, Sandy and myself have all chatted with her but you can also listen to a growing list of our fellow followers every week chatting about what sewing, crafting and Sew Over 50 means to them. It’s really lovely to actually hear their voices, talking with enthusiasm about things they are passionate about. 

At the beginning of May ClosetCore Patterns paid the ultimate accolade to one of my personally most inspirational sewers, Blanca, by naming a pattern after her, it’s a stylish flight/boiler/jump suit (call it what you will) but I love her personal aesthetic and she absolutely rocks this outfit! 

photo credit Blanca via Closet Core Patterns

In the UK during the spring, and at the height of lockdown, we had series 6 of the Great British Sewing Bee to enjoy. It featured several fellow dressmakers who we can claim to be representing ‘us’ on national TV. Yes, we know they are ticking boxes to cast certain ‘types’ but at least this time it’s positive discrimination! Even so, 10 weeks went by far too quickly!

Over the year the account covered all sorts of different topics for discussion including, do you always make a toile or just happy to wing it? What are you pet sewing peeves? (cutting out and pattern tracing seemed to be top for this one!) The art of tutu making was a personal favourite, having always loved ballet and especially the costumes. Tips for better and more accurate top stitching was another goody and @SewitwithDi gave us a master class in using the correct interfacings effectively. There are too many others to mention them all but you can refer back at any time, take a screen shot of your favourites or save them to your archive for future reference.

More recently the account reached, and has now surpassed, 20,000 followers! This was marked with a giveaway where two people who had not necessarily met in real life but had formed a friendship through sewing could each win a copy of the same pattern. If you take a look at the hashtag #so50sewalong you can see some of the garments that have been made since this competition ran a couple of months ago. Incidentally, it’s worth mentioning that the #sewover50 hashtag has now been used almost 80K times up to this point, it’s an absolute wealth of inspiration and knowledge which is all yours for the taking! 

I think many of us enjoyed the opportunity to look back through, and share, some of our holiday photos wearing our me-mades. Sadly many holiday and travel plans haven’t been able to happen this year so it was a lovely way for us all to virtually ‘travel the world’ over the course of a weekend. Lots of us wore those clothes anyway, even if we couldn’t leave home! The online virtual Frocktails in April was another excuse to dress up a bit, knowing our friends around the world were raising a glass to each other at (almost) the same time.

joining with Virtual Frocktails, my dress is self-drafted

Have you been keeping a #so50bingo card? This has been an ongoing way of keeping tabs on what you have been sewing and other techniques/events you could challenge yourself to try. No pressure, it’s just a bit of fun with no time limit. 

During the year I wrote several blog posts based around different topics including sewing advice for newbies (or returners for that matter) your go-to T-shirt patterns, what do you take into account with your fabric buying choices, are you a batch cutter/sewer or just one thing at a time? Judith and I both contributed videos as part of the online Sewing Weekender, this is normally an event held in Cambridge, UK but The Fold Line opened it up worldwide as an online event and it was a huge success with over 1,700 people ‘attending’ from all over the world. 

We also held the second #so50visible challenge earlier in the year, we seem to be having success with getting our images reposted by lots of pattern companies which is a very good thing but notably few are choosing older models-with a few honourable exceptions-to represent their patterns in the marketplace. This is still very frustrating when you look at just how many stylish and inspirational people follow this account but if we all keep plugging away a change will come. One thing that pattern companies have said to us is that the quality of photos isn’t always good enough for them to reshare so the better, and clearer, you can make your photos to show off your makes the more likely it is to get reposted. There have been a number of posts with simple tips on how to improve your photos so why not check them out?

Most recently our own Leader Judith has written an article for bi-monthly US-magazine Sew News talking about Sew Over 50, which you can order online.

So, in spite of everything, lots of good things going on for Sew Over 50 in the last twelve months, some progress being made with representation but I’m sure you’ll agree that isn’t all the account is about. I hope you continue to find the account as inspiring as I do? Yes, we all start off by being here for the sewing but it often becomes so much more than that. Real friendships have been forged as a result, very few of us have ever met one another in real life but that doesn’t stop us identifying and empathising with each other and the lives we lead, especially during these last few extraordinary months. 

I am deeply indebted to Judith and Sandy for the sheer dedication they have on our behalf, and I’d like to thank all of you for your kind words of encouragement, support and appreciation to me personally, I love being a part of this worldwide community of sewing and I can honestly say the last few months would have been very different without so many of you connecting and interacting with me in some way. 

Thank you, and until next time,

Happy sewing!

Sue

Have you listened to the Sew Organised Style podcast yet?

Well, have you? If you’re a follower of the @SewOver50 account then it could be right up your street because it’s creator, Maria @velosews is a part of our community too!

When Maria was in London last year we had such a great visit to Dior:Designer of Dreams at the V&A

Maria has worked hard to gather lots of interesting content and adds new items daily and every Thursday there is something new from SewOver50 to listen to. So far she has chatted with account founder Judith Staley and second-in-command Sandy Bach and several of our stalwarts including, to date, Sue Stoney, Marcia Riddington, Cathy Grant and Carrie Cunningham.

Yours truly has been on several times now to natter about various SO50-focussed blog posts I’ve written including fabric buying choices and batch sewing, as well as the first official meet-up back before the world went wonky! I have to say that Maria makes it so easy to chat, even though she’s on the other side of the world to me! Zoom is a marvellous invention…

I added a specific Sew Organised Style page to my blog recently so that should always link you to their latest episode.

Tune in on Thursdays to hear what the community has been up to or chatting about or sewing…

until next time

Sue