Did you keep any of your old college course work? I am by nature something of a hoarder but even I was surprised when an unpromising cardboard folder came to light recently while we were having a grand clear out. It said “Russia 1980” on the outside so I was excited to think that it contained some memorabilia from my school trip of that year [The trip caused some local controversy at the time because that year the USSR had invaded Afghanistan just a matter of weeks earlier and some people felt we should no longer go. Our Head Mistress, the doughty Miss Pagan, was having none of it so we went regardless! Many countries boycotted the Moscow Olympics later that year in protest…about the invasion, not because my school trip went ahead]
I digress, upon opening the folder I found it contained nothing of that trip at all but it did contain many of the sketches and designs I produced whilst at London College of Fashion between 1983-85 including the final project when I produced two ‘mass market’ bridal outfits. Well what a trip down memory lane they proved to be! It was a period of my life when I was so happy with what I was doing, I’d finally found the right course for me (technical garment construction and not just design) I had a great bunch of college mates, I loved it.
I’m sharing the sketches partly because then I’ve documented everything for my own reference and enjoyment, but also because I hope there might be things of interest to others as well. Fashion-wise the early eighties were a time of puffball skirts and massive ruffles, enormous sleeves and ra-ra skirts, wide collars and even wider shoulder pads! Princess Diana was the style darling of the fashion magazines and whatever she wore became a trend. Last year I shared lots of press clippings and photos from my early working career which you can still read here.
What follows are the design and development sheets for an evening wear module [you can see now why it’s my first love when it comes to making] We had to design variations of similar dresses and gowns to illustrate how a garment could be adapted and simplified to cater for it’s appropriate market.
For my final project I opted to make two bridal outfits, I’m guessing they were mid-range and the jacket and skirt was probably intended as a register office outfit whilst the ‘Laura Ashley” dress and jacket was probably for a simple church wedding or registry office. I had a real client for the suit which was my then-boyfriend’s sister. This was handy because she paid for the fabrics for it, the jacket and skirt were white crepe-back satin and the blouse underneath was a soft green georgette. I think my ‘brand’ was possibly Jacques Verts who specialised in smart workwear for the modern working woman (definitely power shoulder pads with everything) or mother-of-the-bride type outfits with matching everything, dresses, jackets, hats, bags, shoes, the lot.
Laura Ashley were hugely popular in the Eighties with their feminine and floral styles, they also produced a range of dresses for brides and bridesmaids at reasonable prices so that will be why I picked them as my brand for this project.
Well, there we are, another wander back into the past for some Eighties fashion extravagance. You’ll see why I probably won’t embrace the current trend for wide collars because I did them the last time around (although fabulous sleeves will always hold an attraction for me) we were all busy being New Romantics but that Steve Strange eye make-up was difficult to pull off with glasses!
I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.
This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.
There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.
I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.
Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]
Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.
The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.
One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.
At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]
I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.
Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…
While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.
All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.
Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.
Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.
I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.
And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.
I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.
The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?
Just before Christmas I was contacted by founder and editor Jillian Bagnall and offered a complimentary copy of her new, independently published sewing-based mini-magazine called Sewzine to review. I didn’t know what to expect, initially I thought it was an online print-at-home publication but I have been very impressed because it is a nicely produced print magazine on quality paper and with high production values. The graphics are clear and appealing and there’s plenty of attractive photography and illustrations for each article, plus, because it’s been independently published, that means there are no adverts to take up space, it is all content.
Let’s take a look at a few of the articles inside…
I have to admit that bra-making is something I’ve never been very tempted to try, I’d rather leave that to the experts, but I thought the article was very well written because it gives a balanced view of why it’s worth considering making your own bras, or why it might not be for everyone, I was almost persuaded! I thought the information contained in the piece would be extremely useful if you’re about embark on bra-making, including lists of patterns, materials and findings that you would need, where to source them and a tick list to fill in as you collect them together.
I found the article about wool and woollen fabrics really interesting and very well researched, there was all sorts of information about the various sources of woollen fibres and types of fabrics. Like the bra-making article it was well-illustrated as well.
I had a chuckle at the “Bring it Back?” article because I spent so much of my early career cutting and making puffball, or ‘bubble’, skirts. I enjoyed the exploration of the style from its early days to more recent incarnations, I can see this as a thread of articles revisiting other iconic styles in the future…hot pants anyone?
I also really enjoyed the idea of revisiting patterns from a year or two back to reappraise them. We are constantly bombarded by new new new patterns but I’m always happy to reuse patterns I’ve enjoyed making previously. By chance, the pattern featured in this issue is the Grainline Patterns Farrow dress which I’ve actually made 3 times myself, including one review that featured in Sew Now magazine.
The mini-mag is aimed at intermediate sewers but I think this shouldn’t put off less experienced makers. I enjoyed the chatty yet informative style of writing and a lot of time and effort has gone into the inaugural issue, it’s clearly been a lockdown passion project. There are no free patterns or other inducements as an incentive but that does mean that the editorial is unbiased so if you are intrigued to have a read for yourself then follow the link here to the Sewzine website where you can order a copy of the first issue for yourself (it’s priced at £5.75 per copy) Jillian would also welcome any ideas you might have to contribute articles for future issues, contact her via firstname.lastname@example.org While you do that I’m off to have a go at the crossword…
It’s been such a tough time for so many and being a part of the wider sewing community has been a very real lifeline for many people. Those of us that enjoy making our own clothes already realise the obvious benefits this can give us; total freedom to choose types, colours and patterns of fabrics as we wish, the ability to emulate high-end or high street fashion at the price-point we can afford and the skill to make clothes fit our own particular body type, to name but a few. It shouldn’t then come as a surprise that the wider world, whilst searching for activities to entertain and occupy them during the long weeks and months of lockdown, discovered (or rediscovered) that home sewing can be creative, absorbing and rewarding which is a VERY GOOD THING! Who knew there was a link between doing a creative activity and a more balanced sense of well-being??
To be honest it doesn’t matter what that activity is, or whether you’re really any good at it, the fact that it can take your mind away to other less stressful places for a time is what matters.
But at the start of the year none of that was of much interest to most. I was extremely fortunate in January to go on a cruise to the Caribbean so I made a couple of new things to fills ‘gaps’ but mostly I took old favourites…cue multiple photos of 3 versions of The Maker’s Atelier Holiday shirt on heavy rotation! One new item was the Trend Square dress I made in fabric given to me by Dibs from Selvedges and Bolts the previous year, I got a lot more wear later on in the summer.
Within a couple of weeks of getting back, Judith Staley and I hosted the very first Sew Over 50 meet-up in London. We very much hoped, and expected, that it would be the start of many more such meet-ups between followers of the @SewOver50 account all over the world but it wasn’t to be…not yet anyway.
If you’ve been reading my blogs for a while you’ll know that as well as meeting up for sewcials with fellow sewers I really enjoy my visits to exhibitions and galleries. At the end of February I caught up with Janet Poole who is a fellow Lamazi blogger at the Stitch Festival in London, I had such a lovely day shopping and chatting with her, and her friend Great British Sewing Bee winner Juliet too. We didn’t realise it then but we were very fortunate to be able to attend the event at all and I wouldn’t be surprised if others who went didn’t catch the-virus-that-shall-not-be-named because it was so crowded.
About a week after this I was able to go to the stunning new Kimono show at the V&A and, although we didn’t know it at the time, that was to be the final outing for several months…
So then we entered the first long lockdown and that’s when sewing (and some baking) became my primary occupation. During this time I had some blogging commitments for Simple Sew Patterns and Lamazi fabrics to complete. For my first Lamazi post I made a Trend patterns Bias T-shirt dress which was a tough make, not because the pattern was difficult but because I was making the dress for a wedding that never took place. And worse than that, I was making the Bride’s gown too so I still have an almost-finished dress waiting for the day that the wedding can happen.
I know I’m very blessed in that I have little to actually complain about in my life but that does not mean that these months of lockdown didn’t take their toll mentally so, when the call to help make scrubs came, it was something I could actually do! Eventually I made 10 sets, I believe they were headed to a maternity department in a London hospital.
I continued to keep busy by doing a few refashioning projects because the desire to make new things that weren’t going to be worn outside the house was just too depressing. I love the act of making clothes, the planning, the cutting out, the sewing, because that was taking my mind off what was happening in the real world but how could I justify making new clothes that I had little use for? Even dressmaking was starting to become a negative because I felt guilty about it. By doing some refashioning projects using things I already had, other than new fabric, I made a few items including pyjamas for my final Simple Sew post and another pair using the PJ pattern in the Great British Sewing Bee book written by Alex and Caroline of Selkie patterns and for which I had made a couple of samples. I used 4 old work shirts of my husband’s which were very well worn! I also made (eventually) two pouffes as well which took care of loads of scraps and off-cut furnishing fabrics and were extremely satisfying! I also refashioned a very old and redundant heavyweight cotton curtain into a Dawson coatigan by Thrifty Stitcher.
Early on in lockdown I had the pleasure of talking to Maria Theoharous for her Sew Organised Style podcast on a couple of occasions. I’ve set up a separate page so you can access this to be able to listen to her inspiring SewOver50 guests every week. One of our chats revolved around how we each arrive at our fabric choicesfor specific purposes or projects, I wrote this topic up as a post which you can read here, and I also wrote a further post which came from when I was guest editor on the @SewOver50 account and we talked about our cutting out processes-did we cut and make one thing at a time, or cut several things and have multiple projects on the go? Scissors or rotary cutter? Pins or weights? It was wide ranging and fascinating with so many excellent ideas and practices. I hosted another discussion about a variety of hem finishes later in the year and you can read that one here. Incidentally, by the end of this year @SewOver50 has reached an incredible 25,600 followers!!
One of my stranger tasks this year was to carry out a socially-distanced dress fitting on a doorstep! Before lockdown started I had been commissioned to make a dress for a work colleague of my daughter Katie. Thankfully I’d opted to make a toile of the bodice which I’d fitted just before lockdown kicked off so I managed to get the dress to a good stage of completion. However, I got to a point where I definitely needed her to try it on because even if she couldn’t wear it for the event she had hoped to, it would be nice for her to take delivery and wear it around the house!! So I went to their place of work and handed the dress over at arms length to Tracey to put on in the staff toilet, then she came out onto the porch where Katie, under my direction, pinned the dress for me. I took a few photos for reference too. From that I was able to finish and deliver the dress and my client was delighted with it…phew
One of the regular sewing highlights of the last 4 years for me has been the Sewing Weekender which generally takes place in Cambridge, UK in August. The organisers took the bold decision to put the whole event online instead which meant that many more people could ‘attend’ from all over the world. Myself and Judith Staley were delighted to be asked to contribute a video message each which was very nerve-racking but it turned out alright in the end. I published a transcript of mine here, along with the original video (you’ll notice that I had abandoned my signature pink hair by this time because, quite frankly, what was the point of bothering!) The Online Weekender also raised a significant amount of money which was divided between 4 charities.
As lockdown started to ease in the summer I was able to get out and about a couple of times. I joined an al fresco rag-rugging workshop in Hertfordshire run by Elspeth Jackson of Ragged Life which was so enjoyable, and I visited a couple of exhibitions in London including the Kimono show again, plus Andy Warhol at Tate Modern and Tricia Guild at the Fashion and Textiles museum both on the same day. Since then though things have been shut down then reopened, then shut down again. My heart goes out to everyone who is trying to run a business or an organisation that relies on visitors through their doors to make them viable, their future is very uncertain.
I’ve made a few other garments during the autumn which I’ve been really pleased with including the Prada-inspired shirt dress and a pair of Utility pants by Trend Patterns (not blogged yet) but I feel I’ve run out of steam with my sewing right now and I never thought I’d say that. My own teaching classes restarted for a total of 5 weeks in October but they’ve stopped again. I know some have adapted by using Zoom or other platforms but it just wouldn’t work for me, I feel dressmaking is too hands-on and needs real assistance for tricky bits, holding things up to the camera isn’t good enough sometimes. And being part of a group and all that shared enjoyment is a huge part of it too. I’ve had fairly regular online catch-ups with some of my lovely sewing friends and that has been a joy, albeit not as good as seeing them in the flesh.
Mr Y was the lucky recipient of a few handmade garments too during 2020 when I made him another two Kwik Sew 3422 shirts, and not one but two Thread Theory Finlayson sweatshirts! I’m happy to say he’s delighted with all of them and I’ve got plans for another sweatshirt for him in the new year.
I’m working on my own pattern which I’ve self-drafted so hopefully that will be something positive for the new year but I need occasional assistance from more expert friends and that’s making it a drawn-out process which would have been so much more fun person-to-person.
One final project I was commissioned by a friend to make was a Christmas chasuble for her to wear as she presides over her Christmas services in church. A chasuble is essentially a fancy poncho which the priest wears over their other vestments and Wendy wanted me to create one with a Nativity scene on it. She sourced the base fabric with my advice, and a printed quilting cotton Nativity which was sent from the US. This was square so I carefully cut it into approximate thirds with the central third featuring the stable scene and the star for the front, another third with Bethlehem for the back and the remaining third I cut into two parts to use on the stole, which is the long scarf priests wear around their necks. All of these I attached by appliquéing around the black outlines (I was literally making it up as I went along!) Wendy is delighted with the finished result (thankfully) and I’m sure she will enjoy using them during the Christmas season.
As I finish writing this (2 days before Christmas) we have no idea what lies ahead…some countries seem to be slowly recovering whilst the UK as a whole seems to be sliding further and further into disaster, or maybe not? I should try to think more positively as scientists have worked tirelessly to make a vaccine which will gradually be rolled out. Personally I’m a long way down the list for it but that’s absolutely fine, we must protect the most vulnerable first.
This has probably ended up not being a-not-entirely-coherent post but that’s kind-of appropriate I reckon! Wherever you are and whatever the new year brings for all of us I’d like to thank so many of you for reading my posts, sending me lovely or encouraging messages. Being a part of the online sewing community and Sew Over 50 in particular has been an absolute joy and a lifeline at times. We need to lift each other up more often, call out injustices when we see them but not to the extent that it becomes bullying of individuals, that isn’t right either. 2020 has been a year of huge upheaval, I plan to restart 2021 with fresh sewing plans to help me to feel more positive about it…it’s going to be a bumpy ride!
The Festive season is often a reason to make, or buy, a special new outfit to wear for office parties or Christmas Day but this year’s Festive season things will be very different for most of us. I don’t want to be entirely negative though so, as part of the Lamazi blogger team, I thought I’d make something which is a little bit Christmassy but will double up as a ‘regular’ winter dress too.
I’ve chosen the cord velvetfrom Danish Design in a gorgeous shade of aubergine-I’m always a sucker for purple-but it comes in several other beautiful rich shades including a sumptuous gold and a stunning teal too. I picked this fabric because it’s a medium weight stretch jersey and has soft pile which makes it lovely to the touch. I’ve made a dress but you could easily make tops or wide-legged pants in it, or babies and children’s clothes too because it’s washable and crease resistant.
Whilst I love a complex make to really get my teeth into I felt this wasn’t a garment which warranted lots of time. Making a special Christmas once-worn garment wasn’t appropriate any longer so I wanted something quite simple but adaptable and for that reason I’ve picked the Somerset T-shirt by Maven Patterns. I’ve made a few of these now, the bones of it are beautifully simple, it has a self-neatened bateau neckline, a slightly fitted silhouette and four sleeve options. I’ve chosen the Bishop sleeve with a long cuff but I’ve hacked the sleeve to make it even fuller, and I’ll lengthen the body to create a dress finishing below the knee.
The Somerset has excellent very full instructions with lots of tips and advice to get a good finish. There’s a useful sheet to write all your information including body measurements and fit alterations, and a fabric stretch gauge to check you have enough stretch for the pattern to fit properly. You can also list the needle type and size you’ve used, stitch type and length and anything else you might want to remember for another time.
To increase the size of the sleeves I took the bishop sleeve pattern and drew 5 vertical lines from each of the notches from shoulder to hem. Each segment will become slightly wider as it gets nearer the bottom edge so make sure they are even in size.
Cut a piece of spot and cross or tracing paper bigger than the pattern as it is, mark a grainline running right down the paper and then lay the pattern piece on top of it, matching the grain on the pattern to the grain line you’ve just drawn. Next, I carefully cut up to the top of the marked lines taking care not to snip right through at the top, keep it attached by a tiny amount to act as a pivot point. [If you don’t want to cut your original pattern piece I suggest you trace off a new one to use instead] Then you splay the hem edge apart by a few centimetres each, I added 2.5cms between the each of the ‘side’ segments and 5cms to the central one. By doing this you’re adding fullness at the hem but not altering the sleeve head. You could put additional fullness to the sleeve head by opening the top edge too if you wanted. I lengthened the sleeve by 5cms too so that it would have plenty of blousy fullness into the cuff.
Trace around the new shape using a tracing wheel or pencil and cut out the new piece transferring all markings. One final change I made was to add a bias grainline because I knew I wanted to play with the stripe direction of the rib on the fabric.
I had pre-washed my fabric and partly tumble dried it on ‘low’ before letting it dry completely on the clothes airer, it seemed to survive the experience just fine.
I made an arbitrary choice of how long to make the dress by simply holding the tape measure at my shoulder and seeing where it came to at about mid-shin! I attached another piece of spot and cross to the bottom of the front and back pattern pieces and drew on the skirt length I wanted, plus a generous hem. I knew I would have to make some adjustments to the hip and thigh during the fitting stage, just make sure that the hip and thigh measurements are plenty big enough because you can always remove some, it’s much harder to add later!
The ‘cord’ runs across the width of the fabric and I wanted the rib to run down the length of my dress which meant I had to fold the fabric across the width. Try not to twist the fabric if you have to fold this way, I marked a single rib by following it across the width with pins so that I can see it clearly. Fabrics like corduroy, velvet or velour have a pile or ‘nap’ which will shade so if you cut some pieces facing one way on the grain and some pieces running the other way then you will end up with a garment that looks like it’s been made with two different colour fabrics, even though you know that isn’t the case. If you’re unsure what quantity of this type of fabric to buy go with the ‘with nap’ amount on the pattern information and follow the one-way layplan to cut out.
Once I’d cut all my pieces I followed the making instructions which are very comprehensive. If you have a walking foot for your machine I strongly recommend you use it because velour like this has a ‘pile’ and has a tendency to ‘creep’ as you sew so you might find that it starts off with all the edges matching but by the time you get to the other end the two fabrics are no longer matching. I also strongly recommend you tack any seams you are unsure about. You could use a million pins but by the time you’ve done all that you could have basted it in place which does the same job and usually more effectively. I was able to coverstitch the neck and the skirt hem on the Pfaff Coverlock 3.0 I have on loan as a brand ambassador but it works just as well by overlocking the raw edges and twin-needle stitching them down, or zigzag and twin-needle, or two rows sewn singly if you don’t have a twin needle. When it comes to pressing a fabric like this, if you don’t have a special needle board (and few of us do) then you should press on the reverse at all times. You could place a towel on your pressing surface and lay the fabric on top so that the pile of the cloth is against the pile of the towel which will help protect it. Use a pressing cloth as well. These tips will also apply to regular corduroy or any non-stretch fabrics with a pile too.
The bell of the sleeve is gathered using shirring elastic which helps to retain some of the stretch required for the cuff.
Once the sleeves were in I sewed up one side seam directly on the overlocker and then pinned the other side seam to fit myself. This was because I didn’t know if I’d need a split at the hem to be able to walk in the dress and I didn’t want to end up with loads of unpicking!
I looked at the fit in the mirror first of all and the sewn side seam was quite wavy, this could be cured by either adjusting the differential feed on the overlocker so that it doesn’t happen, or you could stitch the seam on the sewing machine and then overlock the edges [This is what I opted to do because I could see I had to take a fair bit off the side seams anyway to achieve a fit I was happy with] Then I put the dress on inside out in front of the mirror and pinned out the excess. I turned it right side out and tried it on again to check the fit, then finally sewed both side seams on the sewing machine, I used a ‘stretch’ needle, a ballpoint or jersey needle performs the same task. Either use a short straight stitch or a straightened out zigzag, make some samples to see which works best for your particular fabric.
Lastly, the cuffs go on and the skirt is hemmed.
And that’s pretty much it, it pops straight over the head so no tricky closures, because of the stretch it didn’t need a split, and that means there’s room for Christmas lunch and it won’t look like a dish rag after spending the afternoon curled up on the sofa watching Christmas telly!
I have to say that I’m really happy with this dress because it ticks all the boxes I wanted it to. It’s comfortable but it looks Christmassy, it looks great with opaque tights, heels and jewellery, but also with boots, a chunky belt, a roll neck top underneath for extra warmth or a cosy scarf…and did I mention it’s comfortable! #secretpyjamas It also has the advantage of rolling up and going in the corner of a bag or suitcase and coming back out again not needing a press. Bonus!!
At 160cms the fabric is very wide so a little will go a long way, and because it’s so soft it would be lovely for children’s wear too. It needs a little bit of careful handling but a lot of that is in the ground work. Make sure you lay it up and cut it accurately to minimise unnecessary stretching or distortion (try to keep it flat on the table or lay it up on the floor) pin or tack the seams so they don’t move about and press carefully as you go and you should be fine.
It’s been an incredibly tough year for so many and I wouldn’t blame you for not feeling like making anything new to wear. However, if crafting and creating bring you joy and respite then you could view it as a gift to yourself, and when you choose to buy from small companies like Lamazi and Maven then you are helping them too.
Thank you to Lamazi for providing me with the fabric for me to write my review, and I hope you find it helpful.
This whole project all came about because I couldn’t resist some ex-Prada fabric I spotted on my friend Dibs’s website, Selvedge and Bolts! She specialises in sourcing gorgeous quality high-end and ex-designer fabrics from Italy and France. This one caught my eye because funnily enough it doesn’t scream ‘designer’ but I liked the graphic print which stands out amongst so many florals.
I ordered 2 metres although I didn’t have a plan for it, then it occurred to me that I should look at actual Prada designs to see if there were any that were at all wearable by someone like me (ie. not six feet tall or looking about 17 years of age!) Somewhat surprisingly there were some really lovely shirt-dresses in eye-catching fabrics.
This was just the springboard I needed so, after a bit of a search through my patterns, I found this McCalls 7470 which had originally been free with Love Sewing magazine at some point in the recent past. The Princess seam lines and shirt styling were exactly what I wanted except I would change the skirt to be a dropped waist dirndl to echo the original.
The #7470 is a Palmer Pletsch fitting method pattern which I’ve never attempted before. I’ve been thinking lately that many of the garments I’ve made in recents months have either been old favourites or very simple shapes with little use of interesting techniques or style lines. I needed to stretch my sewing muscles a bit more-use them or lose them-so I set about following the instructions to tissue fit the bodice first. By a combination of body measurements, knowing my body quirks, periodically trying on the pinned tissue and using my padded-out dress stand Doris I arrived at a fit that I was happy with.
I’m not going to claim it was particularly easy but there are a lot of written instructions on how to approach it on the accompanying sheets to help you, plus online tutorials too. I’d recommend making a toile (or even two) if you need to before using your fashion fabric to avoid expensive mistakes.
I knew fairly early on that my 2 metres of fabric wouldn’t be enough for what I had in mind, and I didn’t want to waste my lovely Prada fabric so I opted to make the pattern instead in a vibrant printed stretch cotton which I’d bought in Paris at last year’s Sewcial event.
I took my time sewing the dress, I wanted to enjoy each part of the process. There is a two-part collar for example, pleated patch pockets with flaps, and a band running right down the front. I had a few problems with insetting the sleeves though. I’d made a small alteration the back of the arm scye which resulted in it getting a little smaller so I expected there to be a discrepancy but it was much bigger than I anticipated, the sleeve head was far too large and wouldn’t fit without puckering and gathering. I looked at a few examples of #7470 on Instagram and many versions were either sleeveless or didn’t mention it as a problem. Anyway, after a lot of fiddling about in the end I dropped the arm scye down to make it larger so that the sleeve head fitted properly.
The skirt was simply 3 rectangles, two for the front and one for the back which I pleated onto the shirt top using a fork to make each pleat even.
So what started as a Prada-inspired dress for one fabric has still ended up as a Prada-inspired dress but made in a different fabric! I finished the whole thing off with these beautiful buttons from Textile Garden all the way down the front.
So that’s my Prada-inspired dress up to this point, just not made with actual Prada fabric. I have a plan for it though because there was another shirt-dress that caught my eye…
I’m really pleased with the outcome and the way it fits, and because I took my time and didn’t rush, it was an enjoyable process. I’d fallen into the habit of making simple projects, I felt something more complex was needed.
These have been very strange times of late and many of our regular activities have been curtailed or stopped completely. I’ve carried on sewing because it’s my creative outlet but a few weeks ago I started to feel like I had no clue what particular projects to settle on. Lots of vague ideas would float into my mind but then just as easily float back out again before I got underway with any of them. I had a couple of things which I had to sew for blog posts but beyond those I didn’t have a plan, or a clue!
My friend Melissa @fehrtrade happened to comment in our WhatsApp chat that she had sketched out her summer sewing plans, complete with their fabric needs. Most fabrics were from her stash and a couple of other items needed to be purchased.
This got me thinking, if I actually wrote down a list of all the things I wanted to make then it might give me the impetus to move forwards in a positive direction. So that’s exactly what I did. Some items on the list are patterns I’ve made previously, and love, whilst others were new ones I’ve been wanting to try. Once I’d created a reasonable list I ‘shopped’ from my stash which was good fun, I have some lovely fabrics just waiting for the right project. Whilst I can be something of an impulse purchaser of fabric I’m pretty good at sticking to my own fabric purchasing rules which I listed in the recent @SewOver50 post about fabric-buying which are as follows:
Do I really love this fabric?
Is it suitable for my intended purpose?
Do I really need it?
Price is obviously an important factor too but, for me, it’s loosely covered by these criteria anyway.
I knew with some canny cutting I could get more than one garment out of some of the fabric so eventually I settled on about 8 things from the list. In some cases I had two patterns for one piece of fabric because I couldn’t decide between them.
Once I was ready to cut, initially I picked the patterns I had made before, several times in a couple of cases. Primarily this meant the pattern was already cut out but also I would have things which were reliable because I knew they would fit, I enjoy wearing the style and there’s always room for another version in my wardrobe. Once I’d started cutting I couldn’t stop! I ploughed on for about a day and half until I had a pile of half a dozen items cut out, four of the six were remakes and two were new patterns. I felt very satisfied with this.
So why exactly am I telling you how accomplished I felt!? Because @SewOver50 right-hand woman Sandy messaged me to draw my attention to Lis @ThreadTaylors who had recently posted something similar on her feed whereby she had cut two shirts at the same time for her son and then made them both up too. Now, even though I’ve just told you that I’ve cut lots of things this isn’t my usual practice, I’m normally a ‘one thing at a time’ sewer. When I’m sewing for myself I like to complete the process from cutting to wearing before I move on to the next project, unless something goes disastrously wrong! (it might go on the naughty step for a bit while I sulk!) If I’m making for someone else there are the inevitable delays if there are fittings to schedule but otherwise the same would apply to that as well. Sandy had spotted a topic for discussion here so she invited me to manage a post on @SewOver50 asking if others cut/made in batches, made one thing at a time, or were somewhere in between?
Well the followers of @SewOver50 did not disappoint! Like the recent discussion about ‘cheap’ fabric, this was a topic where lots of you shared your thoughts so I was kept very busy reading, and responding, over the course of the next couple of days.
This is a distillation of your comments and we all seem to have a similar practices at one time or another. Many said they were like me in that they prefer to have one project on the go at a time and this was most often because they want to really enjoy the process. We take time to select the pattern, choose the fabric, match the thread and source the trims or haberdashery. Then very often it’s time to make a toile, finesse the fitting of that toile, maybe even make another toile or two before they are completely happy and ready to cut the fashion fabric, interfacings and linings! It’s all part of what makes dressmaking and sewing an enjoyable pastime for many and it’s not something to be rushed. Personally I wouldn’t say I rush but I don’t always take as much time as possibly I should. Many felt this made them more focussed, or if plenty of time wasn’t an option then they could break it down into 10-20 minute chunks which felt manageable and was still making progress.
To list or not to list? Or sketch for that matter? Melissa likes to create a page of sketches which is great because you can see a style to remind yourself what it looks like, especially if you’re likely to forget which style the pattern number or name refers to, or from a magazine like Burdastyle or Knipmode for example. I’ve made a long written list, selected a few items from it and ticked them off as I cut them. I also have a large whiteboard on the wall of my workroom on which I write different lists for the various things I’m up to and in normal times that keeps me on the straight and narrow.
Some people suggested this kept them more focussed and I think I agree with them, I can still slot other items in as required. Personally I’d never want any list to be completely regimented with no flexibility because that would suck all the joy out of sewing for me. There are times when I do have to sew things which I don’t really want to but it’s a necessity and so the pleasurable makes are the ones which I ‘reward’ myself with.
A few people said they didn’t like the idea of lists or batches because they felt it took too much organisation, I probably feel less like that because I have lots of haberdashery, trims, interfacing etc so I don’t need to think too much about “have I got so-and-so” in order to make a start.
If you’re a serial non-finisher then there’s every chance you’ll end up with quite a large UFO pile. I think lockdown and Me Made May (which has just finished) has forced/encouraged quite a lot of people to revisit these projects on the naughty step and to reassess them. There is a distinct feeling of achievement when working through them to either finish a garment, repurpose it, recycle it or take it apart and start again!
The space we need for cutting out was one of the biggest factors for concentrating the cutting to a certain amount of time. If you use the dining table or the floor then there’s every chance you’ll need to move your things for practical reasons, family life/mealtimes for example, the floor is very hard on the knees, pets interrupting are a recurring theme too! All of these may mean you can only use the space in small bursts which limits how much can be cut. For many dressmakers cutting out is a necessary evil which they don’t enjoy so want it over with as quickly as possible. As a former sample cutter I always make sure I cut as accurately and efficiently as possible to ensure the best results. You can read a few of my top tips in this blog. If you really hate cutting out then batching could be a good thing because it gets it out of the way for a while!
In order to be efficient many told me that they will cut several of the same pattern at the same time if they have a favourite. Tops and T-shirts were probably the most popular of these but dresses and trousers/jeans also cropped up too. This can work well when you know a garment fits and you aren’t tweaking and fitting as you go along. Whilst making several versions of a single pattern one follower told me she writes notes onto the pattern each time in a different colour so that she knows what she’s done, and to see its development during the process. If you’re making a number of the same thing it’s efficient to keep the threads the same but personally I like to use a reasonably-matching thread to overlock as often as possible. Others are less precious and will use the same colour for everything because repeatedly changing threads takes time and keeping a range of colours can be costly.
Many of us have spent at least some of lockdown cutting and sewing scrubs, bags and face coverings, some sewed lots of them, others just one or two sets. I’ve no doubt at all though that they were well received but there’s no getting away from the fact that they became very tedious after a while. The repetition was pretty boring, although it could also have the positive byproduct of making us become more efficient sewers, and we all agreed it gave us a new-found respect and admiration for those who had no choice but to sew in factories, often with very little pleasure or decent wages involved. Some of us developed ‘production’ techniques whereby we would complete each operation the same on every garment before moving on, for example, join all the shoulder seams, attach all the neck facings, insert all the sleeves etc etc. This undoubtedly saved a lot of time but it does make you a bit boggle-eyed after a few days! @alexjudgesews did admit though that making scrubs nearly put her off sewing for life! I’ve no intention of getting into the discussion of whether or not any of us should have been sewing scrubs but I do know that I’m really really proud of how the home sewing community rose to the challenge and did it any way.
Many of us gather each prepared project together in some way, ready to begin. I like to use large ziplock-type bags which I can reuse over and over, I’ll put the pattern and cut fabric in although I don’t tend to include inter, threads or trims (many do) I’ll grab those as I go along usually from what I have. One suggested idea I liked was to use baskets to contain everything, that’s certainly more attractive than plastic bags!
A few comments made me chuckle, someone said she batch cuts but then forgets about them, where they are or even what they are! My friend Corrie @ceramic67 told me “I often cut 2 or 3 at the same time, I’m still slow but it makes me feel faster!”
A recurring comment was to spend separate days doing each part of their own creative routine so, a day printing and sticking PDFs then a day tracing them off, a day or more cutting the fabric and then the enjoyment of the sewing uninterrupted. We all have our own version of what works for us and it will vary depending on the types of pattern we like to use.
For lots of us it’s more pleasurable to be free to decide what to make and when to make it, pre-planning is no fun!
Amongst the ‘planners’ some use mood boards with sketches, photos and swatches, others will often create mini-capsules to accompany clothes they already have, or make a new, related, group of clothing. I keep swatches of the fabrics I have in a little book, it’s very low-tech but it’s good to leaf through and reminds me what I have without getting everything out.
So as you’ll see there’s no firm consensus and ultimately we do what works for us and our situation. Maybe you just batch cut small projects like Xmas gifts of pencil cases or wash bags for example, or maybe you only ever one thing at a time and nothing will persuade you to do otherwise! Having more than one item on the go could give you the option to move sideways onto something else if you realise you’ve got to wait for a delivery, or head out for some buttons or something, has anything you read here made you think you’ll try a different method next time?
Whatever works for you, until next time, happy sewing!
Firstly, I probably need to give you a quick explanation of why I’m making a fancy frock during the lockdown because it must seem rather incongruous.
This is my first post as a Lamazi Fabrics blogger and before the Covid-19 pandemic reared it’s ugly head I had offered to make an outfit using a slightly ‘tricky’ fabric in order to share a few hints and tips for sewing with it. I selected the beautiful Tencel/Cupro ‘Bark’ fabric in Lavender because we were going to a wedding in late May which would be the perfect chance to make a something using this special fabric. Very sadly that wedding is now postponed indefinitely but I’m making the dress because I’ll still need something to wear when it’s rescheduled.
The fabric has a lovely weight and handle which makes it drape really well. It’s has a bark-like finish and is different on each side, you could use this to your advantage if you want to create an interesting visual effect by having some pieces with one side out and some using the reverse side.
I made life harder for myself by choosing the new Bias T-shirt Dress by Trend patterns (generously gifted to me by them) in which EVERY piece except the sleeves are singles and strange shapes which means you cut everything out on a single layer of fabric right side up (RSU). Unlike most patterns, when you are cutting pairs of parts you can usually flip a piece without too much difficulty, however if you do that for a piece which must be cut RSU you would have completely reversed the print/design to the wrong side when you try to sew it up. This Tencel/Cupro has a nice look whichever side you use but my advice is to be really careful on printed fabrics before reversing any piece labelled RSU.
Next, when cutting slippery or fluid fabrics (unless you have a lovely big cutting table) you’ll need to handle them as little as possible (by which I mean pulling them about to get them into position) which might be easier said than done. I know that cutting out is most people’s least favourite part of sewing but it’s so important to take time and care at this stage. If you’re cutting out on a table with straight sides use the edges as a visual marker to get the end of your cloth at a right angle to start with, ensure the weft (across the fabric) is nice and straight as well as the warp, pull a few threads to find the grain if necessary. If you have more cloth than will fit on the table in one go you could try having the excess rolled on a cardboard tube if you have one to keep it under control rather than sliding off the table all the time.
Because my pattern has large awkward-shaped pieces cut from a single layer I had no option but to cut out on the floor! This can be physically quite tiring so you might want to get help if you need to. This is slippy slidey fabric so an extra pair of hands could help you lay it up nice and straight, again, rolling the fabric onto a long cardboard tube would also help keep the fabric taut and straight as you lay it out on the floor. This is not a fabric to use weights and a rotary cutter on unless the whole lot fits onto a cutting board without disturbing the fabric, if you’re spending time laying up the fabric carefully so that the grain lines are straight in both (warp and weft) directions you can’t then mess it about shifting a cutting mat underneath it and the pattern pieces need to be secured in place with pins. Cut out carefully moving the pieces as little as possible and try to keep them flat after cutting until you’re ready to sew. All of this will help minimise the pieces stretching out of shape, especially as a lot of this pattern has seams running on a diagonal.
Once I’ve finished cutting out it’s vital to transfer all notches and mark darts and a couple of pivot points so I use old-fashioned tailor’s tacks (obviously you can use a textile marker pen if you prefer, I often do but it’s a pale fabric and I didn’t want to risk any marks being left) It’s a habit of mine to keep all the pattern pieces attached by just a couple of pins to the fabric until I need it, so that I don’t them get muddled. These are curious-shaped pieces so the chance of having them the wrong way round could be quite high! Next I stay-stitched all the neck edges on the machine 5mm in, if you have a very loose weave fabric it would probably be sensible to stay-stitch the bottom edge of the front bodice piece to prevent stretching. If you’re using a particularly fine fabric like chiffon you should stabilise the neck, and any other seams which could stretch, by hand-stitching very narrow cotton tape or ribbon over the seam line on the wrong side of the fabric. When I worked for bridal designer David Fielden many years ago we would cut the selvedges off the silk habutai linings for the seamstresses to use on necklines.
There is just a little fraying on the cut edges which I overlocked singly as I went along, as per the pattern instructions. Whether you’re sewing or overlocking the fabric I strongly suggest you have the whole piece supported on the table in front of the machine rather than feeding up from your lap. This is to prevent the piece becoming stretched as you’re sewing and possibly causing it to become misshapen.
If you find, as I did, that there’s a slight discrepancy between two seams (assuming that it isn’t an error in cutting or adjustment of the pattern) then pin it with the excess on the underside so that when you sew the feed dogs will take up the ease.
My photos should make it clearer, a good press will help steam out some of the excess too. Also, to minimise the risk of making a shiny patch on the fabric make sure you use a pressing cloth, you can often buy silk organza ones although I have a piece of plain fine pure cotton lawn which I’ve overlocked around the edge. I use this when I’m pressing darts or turning points or corners out too.
To sew an invisible zip into the diagonal seam across the back I machined the seam closed but I used a long basting stitch just for the section where the zip will go. This stitching will be removed later.
Once the zip was in and side seams sewn up I checked the fit on myself. I cut a UK 16 and overall I’m happy with the fit and apart from the length I made no alterations to the bodice. Because I made the linen version first I already knew that the shoulders were a bit too broad for me and the sleeves dangled too much off the crown of my arm. I calculated that I needed to remove approximately 3cms to lift them up to a slightly better position. I found I didn’t need to alter the sleeve head though, fortunately it still fitted into the armhole. Another thing I did decide at this point was that the sleeve needed ’something’ else so I mocked up some small pleats and pinned the sleeve into the armhole to try out the effect.
After making the pleats in the sleeves and sewing up the underarm seam I used a ‘pin hem’ to finish the edge. This is similar to a simple rolled hem but even narrower. Begin by stitching a turning of approx 1cm very close to the edge, trim this carefully
I love the 1930s/40s vibe of this dress, the drapey qualities of the fabric enhance the bias lines of the skirt in particular. I really enjoyed the challenge of putting the dress together, there are no particularly difficult techniques as such but it’s an interesting puzzle which you’ll need to spend a little time concentrating on, you’ll be rewarded with a striking but really wearable dress.
Thank you to Trend Patterns for gifting me the pattern, there was no expectation to write a review. You can read my previous review of the Square Dress pattern here. The fabric was provided by Lamazi Fabrics in return for a review which is also published on their own website.
I hope you find some tips and advice in here that might be of use to you if you’re thinking of using a fabric that needs a bit more forward planning than you’re used to. Trend have created another beautiful pattern with stunning and unusual details but the pieces cleverly work with the grain of the fabric so that working with the bias cut is a lot easier than it usually is. They have been gradually increasing their size range too so the TPC26 comes in UK sizes 6-22.
Quite a long blog this time so thank you for reading this far and, until next time,
If you’ve read my blog in the past you’ll know I’m a fan of Trend patterns. Lucy is a pattern-cutter and designer based in London and I always make a bee-line for her stand when I go to the Knitting & Stitching shows. At the show last autumn I fell for the Square dress which, as the name suggests, has a square hem and diagonal seams. There are no bust darts because it uses bias cutting to create the fit and because there are no fastenings it’s actually a fairly quick make and would suit a dressmaker with a little bit of experience. If the lack of darts might cause you a problem I definitely suggest you toile the top half of the dress so that you can assess whether you personally need to carry out a Full Bust Adjustment (FBA) Lucy has been working hard to extend the size range across her patterns and as one of the newer styles the Square (TPC23) comes in the more extensive range sizes 8-22.
I bought a copy of the Square (and a skirt pattern too) and shortly afterwards my friend Dibs who owns Selvedge & Bolts online fabric shop asked if I’d like to choose some fabric as a gift in order to write a review of it. So with this pattern in mind, and my upcoming holiday, I picked out a fine linen in a tiny red/white ‘checked’ print. I was so happy with it when it arrived and it’s perfect for this loose type of style.
Before I cut into the beautiful linen I decided to make an initial version in some checked flannel which, at a guess, I’ve had over 25 years in my stash! You can’t rush these things…
Normally I’d try very hard to pattern-match the checks but there wasn’t enough to do that. The seams on the dress run diagonal but in fact only the back and front bodice are cut on the cross, the other rectangles of the skirt are cut on the straight grain so it’s much simpler than you might think to cut and sew together. The pieces are all quite large so there’s not much opportunity to cut many corners, and I didn’t quite have as much of the flannel as was recommended so I reduced the lower skirt panels (front and back are the same for this and the upper skirt panels, the front and back bodices are different though) To reduce the panel I simply folded out a parallel section through it’s longest side. This turned out to be advisable because at 5’5” the points would have touched the ground unless I was wearing high-ish heels.
I cut a straight size 14 and made no other adjustments, the front and back are cut on single fabric and as they are asymmetric you’ll need to keep any directional-print in mind, especially if you reverse any pattern piece to fit it onto your fabric . It’s a straightforward make though so after the cutting out it’s a breeze. I would only suggest that you take care when pinning and sewing the diagonal sections together to avoid stretching the edges out of shape before you sew them. Keep everything flat on a table as much as possible while you do this part. The hem is a deep ‘grown-on’ one which you mitre at the points and this helps give the skirt it’s weight and fluidity. I was happy with the flannel version so I immediately cut the linen one ready to sew up.
The linen sewed together beautifully, it’s quite lightweight and with a lovely drape. As the seams are such a feature of the dress I decided to use one of the decorative stitches my Pfaff Quilt Ambition 2.0 has to offer. After trying a few I picked out a sort-of diagonal grid design which echoes the print on the fabric.
I’m really pleased with how the linen dress has come out, the decorative stitches are perfect for accentuating the seams and it’s such a comfortable style to wear. I’ve worn the flannel version mostly with a roll-neck jumper over the winter, it’s very striking and has garnered many compliments. the linen had to wait until we had our recent holiday to be worn but it was perfect for warm weather and, best of all, it has pockets! I can’t wait to be able to wear it again in the UK…
This such a simple-looking pattern but has so much scope to add drama, it’s distinctive without being outlandish and still be completely wearable…at least I think so!