In the spring of 2022 Lamazi launched their first range of exclusive design fabrics called Garden of Dreams which proved to be a big hit with customers so now, in Spring 2023, they are launching a second range called Summer Party. This collection includes printed linen and viscose marrocain and has been created by super-talented surface pattern designer Rachel Parker using vibrant shades and subtle pastels.
This is the Garden of Dreams fabric which I used to make McCalls Marina #8090 last summer. It’s a Tencel with Lyocel Sateen and an absolute delight to sew and even nicer to wear, it has the most beautiful weight and drape. I squeaked this dress out of 2m of fabric and it was worth the head-scratching because I’ve worn it a lot.
Liana at Lamazi generously gave me my choice from the new collection so I opted for the gorgeous Painted Foliage design which comes on a fine, more environmentally-friendly mill-washed linen, it is semi-sheer and reminds me of beautiful stained glass windows with the sun shining through them. It’s been lovely to work with so I’ll share some of my experiences of sewing with it you.
Because the linen has been mill-washed it’s already beautifully soft but I gave it a pre-wash anyway for my own peace of mind, habit I guess plus I’ve learned the hard way over the years!
Like the Marina dress I wanted to use every possible scrap of the 3 metres of fabric so I chose to use the Maven Wendy smock top (which I already had) for the bodice and then a simple tiered skirt attached at the bottom. A tiered skirt is an excellent way to use every bit of fabric because, with a few calculations, you can simply cut (or tear with certain fabric types) strips across the full width of the fabric available, gather them up and attach to the layer above/below.
I chose to cut a size medium for the blouse although I probably could have sized down to a small, I actually reduced it though the underarm seam after trying it on the first time. I shortened the length by about 30cms too, the amount you need to shorten by will vary depending on the look you’re after. I also wanted more fullness in the sleeve so I ‘slashed and spread’ a traced-off copy of the sleeve pattern to give added volume.
Divide the sleeve pattern vertically into a number of even-width strips (not including the armhole edge though, that remains unchanged) and cut from the hem to just before the top leaving a tiny amount of paper still attached. Pivot each strip open to add fullness at the hem, plus an additional 3cms to the length for a longer finished sleeve. When you’re happy with the shape retrace the new configuration.
By folding the selvedges into the centre fold I could cut the front and back bodice pieces side by side [this is also useful when you need to ensure the good pattern match on a print] I used the various gaps between the sleeves and bodice pieces for the two small patch pockets and the front neck facing. So that I kept the remainder of the fabric as untouched as possible I had to cut and join lots of bias strips for the neck binding. From everything that was left I cut (across the fabric width) two strips measuring approximately 30cms deep and three strips approximately 40cms to form the skirt. [I could have simply cut the remaining fabric into two equal rectangles and made a gathered skirt from that but I wanted a more interesting skirt and sewing the skirt in tiers like this gives a fuller hem] Eventually there were only very small scraps left.
I opted to add some decorative stitching using this Gutermann Deco Stitch 70 thread. The trailing leaf design seemed appropriate from the wide selection my discontinued Pfaff Quilt Ambition 2.0 offers. Attaching the V neck facingMore trailing leaf embroideryAdding the neck binding-I gently pulled up the edge with two rows of gathering stitches first then attached the binding. Because the linen frays a bit (it’s a loosely-woven fabric so this tends to happen and is to be expected) I overlocked the edge before turning the binding over it to finish.I secured the binding in place with more embroidery which ran right through to the tie ends as well.
Next I constructed the skirt, I opted to overlock the cut edges before gathering because of the potential for fraying-I would normally overlock afterwards.
I simply joined the two 30 cms strips at the short ends to form a loop, these seams would eventually match the side seams on the bodice. The three deeper strips were also joined at the short ends to form an even longer loop. I turned one long edge of this section and hemmed it using the trailing leaves embroidery and on the remaining long edge I sewed two rows of gathering stitches, this was pulled up and attached to the shorter skirt section. Finally I gathered the remaining top edge of the smaller loop and attached the whole skirt to the bottom of the bodice, no pattern needed!
Lastly, I created a casing on the bottom of the sleeves and ran elastic through them.
The fabric is semi-sheer and I’m wearing a nude slip underneath it but I didn’t feel the need to line it.Like almost any linen some crumpling develops but I really don’t think it’s excessive or unsightly.Lots of lovely volume for swishing aboutI can’t wait to waft about in this over the summer months
Because of its semi-sheer quality I don’t think the fabric is particularly suitable for trousers or shorts, at least not without lining or mounting it first. It’s a softer linen which lends itself to more unstructured shapes, maybe with gathering, pintucks or soft pleats so shirts. blouses and dresses are ideal. It doesn’t have much drape though unless cut on the bias.
Thank you once again to Lamazi for providing me with this beautiful cloth, I know there are still a few more exclusive collaboration fabrics to come into stock so do keep an eye on the website or sign up for the newsletter. Small businesses are having a very tough time at the moment and I have no qualms about the quality of cloth and the standards of service that Liana and James continue to offer at Lamazi. I was given the fabric but have not received a payment for this article.
I bought 3 metres of this gorgeous viscose crepe fabric (originally bought from Fabric Godmother in July 2020 in probably long discontinued) but it sat in my stash for nearly 3 years before I could decide what to make with it! The problem was that I liked it so much that I didn’t want to waste it on something which didn’t show off the beautiful ‘ceramic tiles’ print, utilise its gorgeous drapey qualities, or which left too much wasted. I would regularly get the fabric out and pin it onto Doris in various ways to see if I could settle on anything in particular. I knew it had to have simple lines and I didn’t want complicated pattern matching to break up the design. In the last year I’ve made a number of LB Pullovers from Paper Theory and it occurred to me that the top was just the right shape to use for the bodice (minus the sleeves and collar) and then I could use what was left for a skirt.
Washed and ready for a three year wait….Four versions of the LB Pullover, so far
I used approximately 60cms for the bodice (I was able to place the front and back side by side across the width) and then everything that was left I cut into strips across the width following the ‘tile’ design. I had enough to make 3 tiers to the skirt and, ideally, each one would have been twice as long as the one above but there wasn’t really sufficient for that. I reckon the tiers were more like one and a half times as long so that would have to do.
I finished the neck edge with narrow binding which I managed to eke out of the remnants. I sewed a reasonable amount at the penultimate Herts Sewcial in early March and then finished the rest later at home. I was over-confident in the fit though because when I tried the finished dress on it was too big. I wanted slightly over-sized and my previous LBs were all a good fit but this crepe fabric had ‘grown’ a bit so I needed to bring the sides in to give it more shape. On the inside at the waist and running horizontally across the side seams I made a wide channel about 25cms long by 5cms through which I inserted elastic approximately 12cms long that pulled up enough for me to be happy with the effect. I finished the dress ready to take on holiday, our first cruise in more than 3 years.
Each tier is as deep as the tile print.
Happy Anniversary to us and cheers to 34 years married!In the fancy atrium of the shippratting about in the fancy atrium of the ship!It’s a bit hard to tell which is front or back so I sewed in this helpful Kylie and the Machine label
It might have taken nearly three years to get there but I’m really pleased with the final result and I know I’m going to enjoy wearing this dress in the coming months.
Do you dither as long as me about what to sew with fabric you love? I can’t be the only one who gets their various fabrics out periodically, strokes it, considers it, matches patterns to it and then folds it away again until next time!
It’s been a while since I wrote my first blog post for Backstitch way back in January but I’m happy to say that I have loved wearing the Ellsworth shirt I made then, it’s been a great addition to my wardrobe.
For my second post I’ve sewn a Homer and Howells Ingrid dress. Like many popular styles circulating this year it’s a loose-fitting dress but the USP of the Ingrid is its unusual asymmetric style lines.
The front and back are both quartered by differing horizontal and diagonal seams, plus the bust shaping is in the form of tucks in the centre front seam. It pops on over the head so no zips to insert, there are inseam pockets and a choice of two skirt lengths and two sleeve shapes.
I felt with all this unusual seaming going on that I didn’t want a busy printed fabric which disguised it (that said, you could have fun with stripes or even checks) My original plan was to use needlecord and deliberately cut the pieces in opposite directions to highlight the shading this would create.
However I wasn’t sure that any of the colours available in the shop at the time I was making it were really very ‘me’ so I plumped for the saffron yellow Broderie Anglaise double gauze instead! [I made this handbrake turn decision partly based on having recently seen a woman wearing a similar style RTW dress made in grey Broderie Anglaise and the fabric looked great, not too ‘girly’ or twee at all]
The stitching on Broderie Anglaise fabric usually has a right and a wrong side if you look closely at the embroidery but it isn’t always very obvious. My advice would be to choose the side you prefer and stick to it throughout! Because virtually every piece of the Ingrid is cut as a single I pinned paper labels onto each one so that I didn’t get them mixed up. Alternatively you could use small sticky dots to differentiate.
I gave the fabric a pre-wash before cutting, there was virtually no dye run and no obvious shrinkage either. Because of its asymmetric shape the Ingrid is almost all cut from a single layer of fabric so I would highly recommend keeping each pattern piece attached to the fabric until you’re ready to use them, or label them as I’ve suggested earlier. [Incidentally, if ever you’re short of fabric for a project, check if you can cut it out of a single layer rather than folded, it’s always more economical…just make sure you mirror everything as necessary] Helpfully Backstitch sell their fabrics in 25cm increments which can mean a lot less wastage, I bought 2m25 for this dress.
I pinned rough labels to the pieces so that I knew exactly which one was which.
I found the instructions and diagrams for construction nice and clear and very straightforward, do read them through a couple of times first though because I made assumptions about the order of making in a couple of places which would have led me up the garden path and some unpicking. The right and left dress parts are sewn tops to skirts before joining vertically at the centre front and back. Some of the seams which would normally match one another on more conventional styles don’t on the Ingrid because of the asymmetry but if you start pinning at the top of each seam down to the hem you should be fine.
The fabric sewed up nicely although be aware that the weave of double gauze causes it to have a little inherent stretch so try not to pull it about too much during construction, and pressing causes some of the natural crinkles of the cloth to flatten as well but they will bounce back after the next wash.
I made a couple of other small deviations from the pattern by using self-fabric bias binding instead of the neck facing. I cut a bias strip 4cms wide, folded and pressed it lengthwise before sewing the two cut edges to the neckline on the dress. Next, I understitched the seam to the inside then finally topstitched it down to finish. I also chose to sew my own thread loop for the button at the back neck rather than try to make a rouleau loop with such ‘bobbly’ fabric, I was delighted to find a button in the shop which is a great match to the fabric colour.
marking the centre front point on my folded bindingPinning the bias binding in positionClose up of the centre front seam details
I wasn’t convinced that either skirt length would be quite right on me so I went somewhere in between, finishing a little below knee length (I’m 5’5”) I wanted longer sleeves too so I used a bell-shaped pattern with a cuff which I had drafted myself for a different dress earlier in the year.
My sleeve has a fixed cuff with gentle gathers (incidentally, the colour here is paler than in reality, the outdoor photos of the finished dress are much more accurate)
Finally, I turned up the hem by 2.5cms and then used one of the huge range of embroidery stitches on my Pfaff machine to sew it up, it took a while to go all the way around the hem but I love the little detail it gives.
The hem is finished with a machine embroidery stitch
The only fitting change I will probably make if/when I sew another Ingrid is to slightly reduce the width of the shoulders, the sleeves cause them to droop off my shoulders a little but it’s not a major issue. I sewed the UK14 with no fitting adjustments other than the length and it’s very comfortable.
The back seams are asymmetric tooThe button and hand-sewn loop
Thank you to Backstitch for providing me with the fabric and supplies to sew with by means of gift vouchers, the Ingrid is not currently stocked in the shop though. Broderie Anglaise might not be typical winter fabric but I love the sunny colour on a miserable English day.
I hope you’ve found my review helpful, until next time,
Well that was another weird year wasn’t it!? I’m not gonna lie but I’ll be glad to see the back of 2021. For every good event there seemed to be two or three stinkers which I found made it really hard to see positives anywhere. I know that there were some good things though and I’m incredibly grateful to have the life that I do so I don’t want to dwell on the downside, let’s move into 2022 with an air of cautious optimism!
I entitled my round up for 2020 as ‘sewing in a time of pandemic’ and I’m so glad I didn’t know then that 2021 was going to be ‘part two!’ Anyway, I’ve collected a few photos to round up my sewing and other events I was able to get up to during 2021 although I’m not sure if they are particularly chronological…the length and colour of my hair at any given time will give you a bit of a clue!
I’ve decided that the Trend Utility pants are definitely my favourite trouser pattern of the year-I had made two pairs by the end of 2020 and finished a third, in orange linen, in spring 2021 and I’ve worn them all fairly constantly. I find them interesting to make, they aren’t a completely straightforward sew and need a bit of concentration but they are all the better for that. The leg flaps are their USP and they are a design feature that make me very happy! I was wearing them in the late summer when we finally escaped with one of our daughters on a week’s holiday, along with another favourite, the Maker’s Atelier Holiday Shirt.The orange linen pair were perfectly autumnal at Kew Gardens in November, and the colours were absolutely stunning.This hacked Sewing Revival Heron dress was one I finished in 2020 but wore a lot in 2021, and will do in 2022 as well.I’m still not convinced about the ribbon bow but I haven’t actually done anything about changing it.
I was looking for new sewing challenges early in the year during the next long lockdown and Mr Y was the lucky recipient of a few items including this Carmanah sweatshirt by Thread Theory. The fabric was kindly provided for me as I’m part of the Lamazi blogger team.
This is the Thread Theory Finlayson sweatshirt I made for Mr Y at the start of the year and he’s worn it on heavy rotation. These items of menswear led to me writing an article for Love Sewing magazine about sewing for men, and by men, in the spring and I joined Maria at Sew Organised Style podcast to chat about it too.Mr Y celebrated his 60th birthday quietly at home in March, we both wore hand-mades!…and we celebrated a second wedding anniversary in lockdown too. Cabin fever had taken hold a bit as I dug out my wedding dress and flounced around the garden in it! I really hope our 33rd anniversary this year can be outside of the house!!Let joy be unconfined because mid-March saw us going for our first vaccination and I wore entirely hand sewn garments to mark the occasion, including a Holiday Shirt, a Nora sweatshirt and my self-drafted rain coat.
I was selected to contribute some articles offering sewing tips and advice for an online sewing project in the early spring but after just two such items they just stopped contacting with me or replying to my emails. Bit rude I’d say, I’ve no idea what was wrong because they never had the courtesy to tell me, and I’ve no intention of wasting more time on them frankly.
Moving on…
Lucy at Trend generously gifted me the kit for the Box Pleat shirt from her capsule shirt collection. Like all her patterns it is so well drafted, I should have gone down at least one size though (my fault for being overly-cautious) There are currently three patterns in the shirt collection but I know there are more in the pipeline. I only made two Minerva projects in 2021 and this Tabitha dress from Tilly and the Buttons book ‘Make it Simple’ was one of them. I really like the Art Gallery fabric and I’ve had plenty of wear from it.I was so happy to see my dear sewing chum Claire after far too long at the Alice in Wonderland exhibition at the V&A in the summer. It was an interesting show although I suspect we nattered all the way around it! [it seems there was a ‘wear checks’ memo sent out too!]
As you know if you read my posts I like to reuse patterns if they have lots of options so I’ve sewn several variations of a number of Sewing Revival patterns during the year, including the Fantail top below which I made in an ancient remnant in my stash which I believe somebody once paid 90p for!
The wide elastic casing in the front hem is such an interesting detail.This is another version of the Fantail featuring jersey cuffs and back hem.This Sewing Revival Kingfisher top was made using the fabric from a summer dress which I never wore. It’s been a satisfying project because I worn it often (I‘d had a haircut by this point too!)I enjoyed the challenge that this Heron adaptation presented because I used linen jersey provided for me by Lamazi fabrics. It was a learning experience and I shared lots of hints and tips in the accompanying post. It’s been such a lovely fabric to wear, it’s very comfortable and it has a beautiful sheen which is not particularly obvious in this photo.I made another pair of Simple Sew Palazzo pants in a linen remnant I bought from Lamazi, they are comfortable and very nice to swoosh about in! That’s a M&M Camber Set top with them.I sewed a third version of the Trend Bias T-shirt dress which I made specifically for an occasion at Capel Manor College in north London when the Japanese ambassador to the UK came to plant cherry trees. I’ve only had a chance to wear it once so far because the weather was getting colder but I have every intention of wearing it a lot in 2022-you know I love a floaty dress and this pattern is perfect for that! I managed to get an outing to the Fashion and Textiles in the autumn to see ‘Beautiful People’ and it was well worth it because the colours and fashions were so uplifting. One of my personal favourite posts of the year was this one where I had rediscovered lots of my college work and sketches from the 1980s. It was so much fun to find them unexpectedly and it seems it was a trip down memory lane for many of you too.
I wrote just three specific Sew Over 50 blog posts in 2021, the first was a summing up of lots of ideas and inspiration for how to sew more sustainably which the followers of the Sew Over 50 account contributed. There was a lot of it and it definitely worth a read.
Judith Staley joined Maria on the podcast to chat about it too.
I was a guest editor on the Sew Over 50 account in the autumn when we chatted about mannequins in our sewing practice. Many of you contributed some brilliant and insightful comments, I wonder how many people have gone on to buy a dress form, or use the one they have differently, or more often, as a result?
Sew Over 50 stalwart Tina generously shared with us the many resources she has gathered together over the last couple of years for sewing and adapting patterns and clothing after a breast cancer diagnosis. It has been one of my most read articles on the blog since it was published in the autumn and I know Tina is happy for followers to contact her via Instagram for any advice or support she can offer them. For me, she very much represents the positive aspects of being a part of this worldwide community.
One of my favourite ‘in person’ events in the sewing calendar, Sew Brum, quietly took place in the autumn and my lovely mate Elizabeth kindly put me up overnight and we had some quality shopping and sewing time together. Our friend Melissa even joined us for a couple of hours for a Zoom sew! Plus I ran in my first (and so far, only) Park Run too! phew, it was a busy and almost-normal 48 hours.
We got VERY wet at the Park Run but we earned extra smug points in our me-made Fehrtrade running kit! [I wrote a post about the Tesselate Tee that we’re both wearing here] I didn’t even buy any of this green fabric at Barry’s in the end…
I finally made a jumpsuit (or two) at the end of the year, it’s the Cressida by Sew Me Something Patterns.
I made this second one to wear at the first Lamazi open day in November. It was so much fun to be a part of and I really hope there will be the opportunity to hold more events during 2022 because it so good to meet up with people in person and to just chat about sewing all day.This was fun outing to the V&A that actually happened rather than being cancelled like so many others, it was an in-person talk by Oscar-winning costume designer Sandy Powell and it was absolutely fascinating. I’ve really missed these talks in the lecture theatre and it was great to be back.Being an actual grown-up at a fun event! I splashed out on this unusual quilted fabric from Merchant and Mills and sewed it up into their Fielder top plus I wrote up a blog post on how I made the too-wide elastic fit around the neckline.These Eve pants are also a Merchant and Mills pattern and they became my second-favourite trousers of the year, made in their Elinore checked linen and worn with a long-sleeved Holiday shirt in Swiss Dot. This second Hug hoodie of the year by Made It Patterns is definitely one of my favourite makes of the year. It looks tricky but is very straightforward to sew and the style lines look very effective.
For quite a while I had wanted to organise an informal sewing event and they were finally able to happen in October and November with #HertsSewcial It was such a joy to be reunited with my Sew Over 50 stalwart friends Ruth and Kate, along with meeting several other online friends like Bev and Elke in real life for the first time. We had so much fun sewing and chatting together, the time flew past far too quickly and I very much hope I can organise some more in the New Year, current situations permitting.
Can you tell that Ruth, Kate and me are happy to see each other again after far too long!?
And my final sewing treat of the year was being able to meet up with Judith Staley in her hometown of Edinburgh!! It was much too brief but absolutely better than nothing, we had so much we could have talked about but that will have to wait until our oft-rescheduled and much looked forward to sewing get together next spring…fingers tightly crossed!
My final personal make of the year was another Maven Somerset top in this celestial jersey I bought at the Lamazi open day. It’s festive without screaming CHRISTMAS!
And so ends another year of sewing and other stuff, as well as the new garments I’ve sewn for myself there were many other occasions when I wore, and re-wore, favourites which didn’t need to be photographed! I fervently hope 2022 brings better times for everyone and that we can adapt to our new or changed ways of living. Sewing will continue be a big part of my life and I hope there will be some new and exciting projects and opportunities during the year. There are so many wonderful people in this community and the support and encouragement that swirls around has been so important during another trying year-I hope I will get a chance to meet up with more of you in person during the next twelve months.
Until then, thank you for reading my wafflings, happy sewing and a very happy New Year,
Did you know that linen jersey was even a thing? It’s an unusual fabric which you don’t see often, we all know knits are available in most other fibre types-cotton, wool, silk or man-mades for example- but I’ve never worked with it before so when Liana invited me to sew my next Lamazi project using it, and to pass on any hints and tips for sewing it, I was up for the challenge.
This 100% linen jersey comes from Mind the Maker in a range of colours and I picked the Dry Mustard shade which is a lovely vibrant ochre. The fabric has a beautiful lustrous sheen on the right side, the reverse is duller so it makes it much easier to tell the difference between the two. It has lovely light drapey quality too and is slightly sheer.
Linen fabric is not a textile known for its inherent stretch qualities and this jersey does feel slightly different from other knits because it has only a small amount of stretch along its length and quite a lot of stretch across the width but it has very little recovery so once it’s been stretched out it will stay like that at least until it’s washed again. During construction the application of plenty of steam will encourage some of this accidental stretching to be eased back into position so, coupled with its sheerness, this means that you need to think carefully about what garment to sew with it.
Plenty of steam will help remove most unwanted bagginess like this
The properties of linen fabric itself [cool in warm weather, warm in cold weather] mean that it would be ideal for loose-fitting leisure or exercise wear, for yoga or Pilates for example. I would definitely say it’s better to avoid anything that is particularly close fitting because areas like the elbows or wrists would become stretched or baggy with little recovery. However the fabric has a lovely drape and its fine gauge allows it to be gathered up successfully so these properties could be exploited instead.
Bearing all these factors in mind I decided to make (another) Sewing Revival Heron dress which I would hack into a blouse. The pattern has a neckline which is gathered using elastic along with raglan sleeves with deep elasticated cuffs. To mix it up further I decided to pull the hemline in onto elastic rather than have a wide smock silhouette.
First things first, I washed the fabric by hand to remove any risk of excessive shrinkage or twisting in the machine. If you want to wash it in the machine then it might be an idea to overlock the cut ends together first to form a long loop and place it into a large washing bag to protect it further. Alternatively you could press it on your ironing board with plenty of steam instead. If at all possible it is better to dry the fabric flat, and certainly don’t wring or twist it. All of this might sound off-putting, and it is clearly not as straightforward as chucking a nice stable cotton into the machine but this is a luxurious fabric and deserves to be treated and handled carefully in the preparation. When it comes to cutting out your pattern pieces lay the fabric as flat as possible, handle it gently and don’t pull it about too much, especially if you decide to fold it. I made a whole back pattern piece for my top so that I could cut it flat, another appeal of the Heron pattern for me is that it has just three pieces so it’s a relatively quick sew usually.
After cutting all the pieces the first thing I did was stabilise all the raglan shoulder seams using some iron-on seam tape, I did this to prevent any unwanted stretching before I sewed the sleeves in later on. I added small squares of iron-on interfacing to reinforce the bottom of the opening on the centre front seam too. I also decided to press all the folded parts of the casings/ruffles for the neckline, sleeves and hem before sewing anything together, just so that I was handling the cut-out pieces as little as possible, again to prevent unwanted stretching before they got joined together. I also tacked these folded parts into position temporarily. All this might sound excessive but I wasn’t in a rush, and I found the slow and considered processes very soothing at quite a difficult time.
iron-on stay tape to prevent unwanted stretching of the raglan seams
the pinned raglan seams showing the slight excess to be absorbed
the finished seams inside the garment
I pressed and tacked casing/ruffles before joining the sections together later onreinforcing the bottom of the neck opening with small squares of iron-on interfacing.
Something else I did before commencing was check on fabric scraps which needle and stitch-type would give me the best results. A ballpoint needle suitable for stretch/knits/jersey is essential to prevent snagging which could lead to laddering of this delicate fabric, and I found a short straight stitch was better than a narrow zigzag but you must do what works best on your own machine. You could sew a garment together entirely on an overlocker but be aware of the lack of rebound this fabric has so if it gets stretched or misshapen while it’s being sewn then it’s probably like that permanently. I also tested the overlocker finish before diving in for the same reasons. If you don’t have an overlocker this fabric is fine enough that where possible you could probably sew self-neatening French seams, or a wide zigzag might work but just be careful it doesn’t chew up the edges. If you have an overlock stitch option on your sewing machine and/or a special foot to sew an overlock-style stitch then definitely use them. Test all options before making your choice, the time taken could save you upsets later on. I slipped some folded strips of paper underneath the seam allowances when I pressed them to minimise any chance of the seam showing through on the front
testing stitches and overlockingI popped two strips of folded paper under the centre front seam while I pressed it so that there was no show-through or unwanted shininess on the right side.
If you have a walking foot for your machine this is definitely a fabric worth using it for, even if you don’t it’s a good idea to use plenty of pins. I’m not a fan of mini-clips because I think they are too heavy and get in the way, this fabric is lightweight and I think mini-clips could distort it while you’re sewing but it’s up to you. Tacking seams is always an option too of course, any technique that prevents the fabric shifting while you sew basically.
If you’ve followed my blog for a while you’ll know I’ve made a few Herons before so the construction was straightforward, the only area I did differently was to create the ruffled hem with a wide elastic casing. I couldn’t decide between my planned 2cms or 1cm wide elastic initially so I tested with the two widths to see which I preferred-I chose to stay with the 2cms width as planned.
testing which elastic width I preferred for the hem, this was the narrow one (the fabric scrap is wrong side out!)and this is wider width, it’s the one I used at the hem in the end. using a bodkin to insert the narrow elastic in the neck casing.checking the gathered neckline on the standI used this quilting attachment on my machine so that I sewed an accurate parallel width for the elastic casingclose up of the elasticated hem casing
To sum up, I’m really pleased with how my first experience of sewing with linen jersey has gone, I’ll admit I was a little nervous because Liana was putting her trust in me with an expensive fabric but taking the time to plan and test, and use my existing knowledge of working with knits definitely helped. Because of the sheerness of the fabric Lamazi also provided me with a metre of Atelier Brunette crepe viscose in Ochre to make a camisole to wear underneath, I used the Simone camisole and trousers pattern by Maven which is a very quick make and a very useful garment to wear on its own or underneath other garments. The crepe viscose is a beautiful quality fabric with lovely handle and drape but be aware that there’s a disappointing amount of creasing, you might want to take that into account when planning, for example if you’re making something you’ll spend a lot of time sitting in.
all finished
As always, I hope you find my hints and tips helpful if you choose this lovely fabric, I wouldn’t recommend it to a novice sewer because some experience of sewing with other similar fabrics is definitely an advantage, plus it would be shame to end up with a costly mistake, but if you’re looking for a new challenge to add to your repertoire this could be a good start. I’ll launder the finished garment either by hand or in a wash bag on a gentle cycle in the machine. I’ll dry it flat too and store it that way, I don’t want a coat hanger to make it misshapen. If you’re a person who prefers not to worry too much about their clothes or their maintenance then this might strike you as overkill, and that’s fair enough, but I don’t think it hurts to have a few special things in our wardrobes which were worth the effort to make for ourselves.
I’m looking forward to wearing this top as autumn is fast approaching (did summer ever arrive!?) thank you to Lamazi for providing me with the fabric to review.
Did you keep any of your old college course work? I am by nature something of a hoarder but even I was surprised when an unpromising cardboard folder came to light recently while we were having a grand clear out. It said “Russia 1980” on the outside so I was excited to think that it contained some memorabilia from my school trip of that year [The trip caused some local controversy at the time because that year the USSR had invaded Afghanistan just a matter of weeks earlier and some people felt we should no longer go. Our Head Mistress, the doughty Miss Pagan, was having none of it so we went regardless! Many countries boycotted the Moscow Olympics later that year in protest…about the invasion, not because my school trip went ahead]
I digress, upon opening the folder I found it contained nothing of that trip at all but it did contain many of the sketches and designs I produced whilst at London College of Fashion between 1983-85 including the final project when I produced two ‘mass market’ bridal outfits. Well what a trip down memory lane they proved to be! It was a period of my life when I was so happy with what I was doing, I’d finally found the right course for me (technical garment construction and not just design) I had a great bunch of college mates, I loved it.
I’m sharing the sketches partly because then I’ve documented everything for my own reference and enjoyment, but also because I hope there might be things of interest to others as well. Fashion-wise the early eighties were a time of puffball skirts and massive ruffles, enormous sleeves and ra-ra skirts, wide collars and even wider shoulder pads! Princess Diana was the style darling of the fashion magazines and whatever she wore became a trend. Last year I shared lots of press clippings and photos from my early working career which you can still read here.
The earliest image is from before my college days and it’s the dress I made for my school friend’s 21st birthday in October 1982. It was entirely self-drafted because I hadn’t formally learnt pattern cutting yet at this point. I can remember it clearly and the notes on the sketch are very thorough. It was a great party too!
What follows are the design and development sheets for an evening wear module [you can see now why it’s my first love when it comes to making] We had to design variations of similar dresses and gowns to illustrate how a garment could be adapted and simplified to cater for it’s appropriate market.
This was the high-end dress as a starting point, it still has fabric swatches attached. I will have trawled the fabric suppliers around the college in London’s West End and been one of those annoying students who would ask for swatches of expensive fabrics which they had no possibility of ever buying! Most of the shops and showrooms were amazingly tolerant of us. It’s such a typical 80s dress with ruffles and bows a-plenty.
This was the middle market version so the fabric would have been less costly and the ruffle quota was much reduced, it was similar but simplified. There would have been fewer hand-sewn elements but the silhouette is still recognisable.
This is the mass market dress and I made notes to the side as well. It is still recognisable as the coming from the same silhouette but costs were further reduced by using inexpensive fabric and much less of it. I wonder if I made a conscious decision to use felt tip for the sketch as well?
Variations for the high-end dress (I obviously preferred this market as the drawings are better!)
more development ideas
Crikey, getting very carried away with the felt pens here, I think there’s a hint of Antony Price and Thierry Mugler creeping in
I remember starting to make this one up but I don’t think it was ever finished, I wonder what happened to it? It’s probably in a box in my parents’ loft!
lots of detailed annotations
yet more variations
Blimey!
What I find interesting about all of these sketches is the similarity to the designs I would actually go on to work on at David Fielden after I left college. At this point I had no real idea that bridal and evening wear was the direction I would eventually take, I just knew that I really enjoyed it.
And this is where my bridal career effectively began, it was the optional bridalwear module in the second year of the course. I still had a hankering for theatrical costume so this was a perfect outlet for those ideas. I cut and made this dress, eventually I disassembled it and I know I still have the buttons at least in my ‘collection’.
Sleeves were clearly a ‘thing’ for me!
I don’t remember what these were related to, just general evening wear I guess
woaah, more enormous sleeves, and rosettes too
For my final project I opted to make two bridal outfits, I’m guessing they were mid-range and the jacket and skirt was probably intended as a register office outfit whilst the ‘Laura Ashley” dress and jacket was probably for a simple church wedding or registry office. I had a real client for the suit which was my then-boyfriend’s sister. This was handy because she paid for the fabrics for it, the jacket and skirt were white crepe-back satin and the blouse underneath was a soft green georgette. I think my ‘brand’ was possibly Jacques Verts who specialised in smart workwear for the modern working woman (definitely power shoulder pads with everything) or mother-of-the-bride type outfits with matching everything, dresses, jackets, hats, bags, shoes, the lot.
Quite a bit of Eighties power shoulders going on in these
Laura Ashley were hugely popular in the Eighties with their feminine and floral styles, they also produced a range of dresses for brides and bridesmaids at reasonable prices so that will be why I picked them as my brand for this project.
I remember those box pleats being the very devil to work on, I think I made things very complex for myself with them. I bought a pretty white cotton damask fabric from Laura Ashley to make my sample from (like tablecloth fabric but softer) I’m pretty sure there’s still a bit of it knocking about in one of my fabric boxes…I wonder what happened to the dress and jacket though?
Well, there we are, another wander back into the past for some Eighties fashion extravagance. You’ll see why I probably won’t embrace the current trend for wide collars because I did them the last time around (although fabulous sleeves will always hold an attraction for me) we were all busy being New Romantics but that Steve Strange eye make-up was difficult to pull off with glasses!
rocking my Eighties mullet (specs sponsored by Everest double glazing…)
I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.
the first Fantail top
This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.
There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.
I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.
Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]
Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.
The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.
Pin the side seams together like so first, the raw edge of the deep elastic casing for the front is already pressed up by 1cm and the bottom of the ribbing is lined up against the notch for the casing.
Next, fold up the front so that it sandwiches the ribbing like this, pin in place. Now sew the seam starting at the fold on the hem. If you haven’t used this method before you may want to sew one side first and check it to make sure you’re happy with it, it can be a little confusing initially but it’s worth persevering.
Turn the hem to check it is level and, if you’re happy with it, neaten the seams however you wish. This is before I neatened the side seam but it will look like this on the inside.
The outside will look like this, so neat!
One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.
At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]
The ribbing is currently not edge-stitched in case it causes puckering
I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.
I seem to be constantly attracted to teal/turquoise/duck egg shades recently so this Art Gallery organic cotton jersey for my recent Minerva post looked perfect when it hoved into my field of vision!
I’ve used Art Gallery knit fabrics in the past and the designs and fabric, whilst fairly pricey, are lovely quality. This particular jersey is an organic cotton (with a little Elastane) and very soft, a lighter weight than many so it would be good for children’s and babies clothing as well as adults. I love the print, I think it’s a vaguely ‘Tribal-esque’ graphic stripe and I quickly decided to make a Tabitha T-shirt from Tilly and the Buttons book ‘Make it Simple’ which I’ve made a few times before but to try out the dress hack version for a change this time.
I traced off a new copy of the pattern using the horizontal lines indicated across the bodice specifically for the dress. I’m not long in the body but I thought it looked a little short so I added an extra 2cms to the bodice length. In truth I probably could have added more than that because I feel there isn’t as much blousing at the waist as there seems to be in the photo in the book [If you know, or suspect, you have a long body length then pay close attention to this before cutting your fabric, get someone to take your nape to waist measurement and compare it to the back pattern piece. If necessary then add any extra through the horizontal ‘lengthen/shorten’ lines, and don’t forget to do the front as well!] If you’re wondering why this matters, it will mean that the waist seam sits too high above your natural waist and could look more like Empire line.
I followed the instructions in the book to draft my own skirt pattern which was simple enough, you only need one because the front and back are identical (you’ll need a decent sized piece of paper to do this) I cut the new front and back as complete pieces so that I didn’t have to cut anything on the fold, I also wanted a short sleeve so I traced one off.
The fabric was a little bit curly at the edges so I took my time cutting out, be careful not to pull or drag the fabric at this stage because this could result in twisting of the finished garment. It’s helpful to mark stripes onto the pattern so that you can then match them to corresponding seams more easily. Cutting a single layer of fabric can really help make this more straightforward, and be less wasteful too.
Moving on, the suggestion for the waist casing is to use eyelets or buttonholes. I used a small round-ended buttonhole, whichever method you choose make sure you interface underneath first to stabilise the fabric. I used the quilting guide to help me sew an accurate 2cms seam to create casing. Once I’d sewn it I used a bodkin to thread the ribbon through.
Tiny round-ended buttonholes instead of eyeletsUsing the quilting guide to sew an accurate 2cms seam to create the channelI used a bodkin to thread the ribbon through, this was some tape I used initially until I got the better-matching teal grosgrain ribbon.
The rest of the construction was pretty quick because I already knew the T-shirt in size 5 was a nice fit, the skirt was a bit ‘hippy’ though so I took some off in that area. Following the drafting instructions the pattern piece is shaped for the waist but, for me, a straight rectangle would suffice.
The length was educated guesswork but I’m very happy with it and it’s not too restrictive at the hem, any longer or narrower and the skirt might need a split in it to allow movement. I have the advantage of using a Pfaff coverstitch machine to hem the sleeves and skirt but a twin needle or a zig-zag stitch will do the job too, and don’t forget to use a ballpoint or jersey needle. I used a narrow grosgrain ribbon in a toning teal to slot through the waist casing to complete the dress. As I mentioned near the beginning I might add just a little more length to the bodice next time but otherwise I’m really pleased with this Tabitha dress, it will be comfortable to wear for everyday and easy to roll up in a suitcase if I ever get to go on holiday again!
not keen to reveal pasty white legs!
Minerva provided me with this lovely fabric to write about, I’m delighted with the quality and I’m especially happy with the dress which is so just comfortable.
Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…
my very first version of the Heron dress…it has pockets!
While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.
All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.
Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.
Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.
I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.
And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.
It got an outing without the belt before lockdown started last spring, it looked a bit too sack-like though
By the time it was ‘seasonally appropriate’ again last autumn I tried it with belt and much prefer it.
I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.
I grabbed a cheeky selfie in John Lewis with my sewing friend Ruth in the autumn, we can only dream of when we can meet up again at the moment though sadly. that’s my upcycled jeans jacket I’m wearing
The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?
Just before Christmas I was contacted by founder and editor Jillian Bagnall and offered a complimentary copy of her new, independently published sewing-based mini-magazine called Sewzine to review. I didn’t know what to expect, initially I thought it was an online print-at-home publication but I have been very impressed because it is a nicely produced print magazine on quality paper and with high production values. The graphics are clear and appealing and there’s plenty of attractive photography and illustrations for each article, plus, because it’s been independently published, that means there are no adverts to take up space, it is all content.
the cover of the first issue of Sewzine, the leading article about bra-making features on the front
Let’s take a look at a few of the articles inside…
I have to admit that bra-making is something I’ve never been very tempted to try, I’d rather leave that to the experts, but I thought the article was very well written because it gives a balanced view of why it’s worth considering making your own bras, or why it might not be for everyone, I was almost persuaded! I thought the information contained in the piece would be extremely useful if you’re about embark on bra-making, including lists of patterns, materials and findings that you would need, where to source them and a tick list to fill in as you collect them together.
I found the article about wool and woollen fabrics really interesting and very well researched, there was all sorts of information about the various sources of woollen fibres and types of fabrics. Like the bra-making article it was well-illustrated as well.
I had a chuckle at the “Bring it Back?” article because I spent so much of my early career cutting and making puffball, or ‘bubble’, skirts. I enjoyed the exploration of the style from its early days to more recent incarnations, I can see this as a thread of articles revisiting other iconic styles in the future…hot pants anyone?
I also really enjoyed the idea of revisiting patterns from a year or two back to reappraise them. We are constantly bombarded by new new new patterns but I’m always happy to reuse patterns I’ve enjoyed making previously. By chance, the pattern featured in this issue is the Grainline Patterns Farrow dress which I’ve actually made 3 times myself, including one review that featured in Sew Now magazine.
The mini-mag is aimed at intermediate sewers but I think this shouldn’t put off less experienced makers. I enjoyed the chatty yet informative style of writing and a lot of time and effort has gone into the inaugural issue, it’s clearly been a lockdown passion project. There are no free patterns or other inducements as an incentive but that does mean that the editorial is unbiased so if you are intrigued to have a read for yourself then follow the link here to the Sewzine website where you can order a copy of the first issue for yourself (it’s priced at £5.75 per copy) Jillian would also welcome any ideas you might have to contribute articles for future issues, contact her via sewzine@gmail.com While you do that I’m off to have a go at the crossword…
Susan Young Sewing 