Trend Utility trousers TPC12

My first blog of 2021 features my last make of 2020. After several quiet weeks where I didn’t sew any garments, I had cut this project out a couple of months back but then hadn’t felt motivated to make them at the time…the days between Christmas and New Year was the right time to get my head around a nice involved project though. There has been so much going on in the UK recently, (understatement!) especially in these last few weeks, that I wanted something I had to concentrate on to take my mind off other events outside of my control.

If you’ve read my blog in the past you’ll know by now that I’m a big fan of Trend Patterns but these are the first trouser pattern of theirs that I’ve tried.

I saw Lucy wearing her own version of TPC12 on her stand at the Stitch Festival in London back in early March 2020 (just before everything went weird) and it was the unusual split hem detail that initially I really liked. On closer inspection there are some other nice features too, like the topstitched front seams with optional faux pocket flap, and a button fly. These are the kind of details that attract me to a pattern but I would say before I go much further that this is definitely an intermediate pattern as a result, you will need to be a confident sewer or at the very least game to increase and expand the skills you have already. Before I left the show that day I bought some nice heavier weight plain black linen from Rosenberg’s to make them with.

It was then literally months before I decided to tackle the pattern though. I’m not going to lie, and don’t judge me either, but I had piled on weight during lockdown which I wasn’t happy about and as I got bigger the last thing I wanted to do was make a pair of trousers that emphasised that fact. Eventually however I began dealing with the weight issue which in turn encouraged me to revisit the Utility trousers in the early autumn.

Instead of using the linen for the first pair I bought some grey stretch cotton twill from Backstitch near Cambridge. It’s lovely fabric for trousers and a very good quality at a reasonable price. Because the Utility’s are a fixed waistband I went by my waist measurement at that time (it was shrinking!) so I chose the UK 16 and I could tell that the hip would on the big side but that was OK.

I patiently traced off all the pieces which took a while because there are quite a number of unique pattern pieces that need to be cut right side up (RSU) Labelling them all is of paramount importance so that you don’t end up with unusable pieces of fabric cut the wrong way. Once I had cut the fabric out I left all the pattern pieces attached to the fabric until I had either interfaced them or until they were ready to be sewn. I made both my versions exactly (apart from fit alterations) as the pattern but you could leave off the pocket flap detail by cutting a pair of side fronts, or you could have two pocket flaps by doubling up those pieces instead. An advantage of having so many single pattern pieces is that you might have a more economical layplan because they will interlock better, folded fabric is a much less efficient way of cutting out, a single layer just takes a bit longer.

I said at the start that this is an intermediate pattern in my opinion and that is largely because the hem vents and the button fly are quite involved, although not actually difficult, plus I found the instructions and diagrams were a bit tricky to follow. I didn’t go wrong but they do require absolute concentration. What I’ll do in this blog, so that’s useful to you if you decide to make the trousers, is simplify the order of making down to a basic list which you can use in conjunction with the actual instruction booklet. I won’t give you specific, press here, topstitch there, instructions though, they are in the booklet and the diagrams are very detailed.

My first piece of advice, after you’ve attached all the interfacing to the relevant pieces and transferred all markings to the fabric, is to overlock all the cut edges (except the waist and fly front) first. I don’t normally do this because I prefer to overlock as I go along but it makes more sense here to do it as a batch process, just make sure you don’t trim away too much or lose your notches in the process.

Start by making the ‘pocket’ flap [make up the optional pocket bag if you are going to have one but set it aside for the moment] also, make the back darts and set the pieces aside for now.

Join the front seams for both fronts as far as the vent markers, do not join the fronts to the backs just yet. I found it easier to have only the vent sections to work on flat first although the instructions tell you to join the fronts to the backs. Once you’ve made both the vents except for the final single topstitching to hold the flap in place and are ready to turn up the hem join the fronts and backs at the side seams first. Now complete the topstitching to hold the vent in place then join the inseams, turn up the hem and topstitch to finish. [If you’re using the additional pocket bag I would add it whilst the leg is still open and flat, before sewing up the inseam. I sewed mine on earlier and it got in the way a bit when I was joining the various leg seams]

Pin and partially stitch the crotch seam as per the instructions then apply the outer waistband and press the seam up towards the waistband. [If you want to include belt carriers I would add them before attaching this waistband so that they are caught in the waist seam, the tops of the carriers will be enclosed when you add the facing]

Next, make the right fly section and buttonholes as per the instructions and diagrams. I’ve included a photo of where I stitched through the layers of the right front to hold them all together, I’m not sure if this is quite what is intended but it works-I couldn’t make sense of it otherwise!

the pencil is pointing to where I’ve added the row of stitching to keep the layers together.

Make the left fly front and attach the waist band facing, I’ve included the photo below of how this should look from the inside (yes I did use jazzy overlocking thread just because…)

the completed grey version showing the button fly and jigger button

Sew the remainder of the crotch seam to complete it, then sew the entire crotch seam again about 1-2mm away from the first stitching line.

Sink stitching-to complete the waistband-is simply the industry term for ‘stitch in the ditch’.

Obviously there are points where you would be advised to try the trousers on to check the fit as you go so you could do this by pinning on the stitching line (parallel, not at a right angle!) to avoid unpicking. The advantage of having a split waistband on the centre back seam (like good quality men’s trousers) is that you can fit into the small of the back more effectively.

So that’s, hopefully, a simplified method for you, it isn’t that I think the instructions aren’t good, it’s just that I got a bit confused between what was written and which diagram to follow, and that’s why I wrote it down in a clarified form as I made the second pair.

The fit of the first pair is technically not that good but they are soooo comfortable. The waist was a good fit initially although I’ve lost more weight since then so it’s very roomy now. The major issue (and I’ve read this in a few reviews) is that the crotch length is very long and looks quite droopy. You can see this in the photos of my grey pair, and this makes the cropped leg length look a bit too long as a result. For the second pair in the black linen I redrew the pattern down one size and also folded out 3cms horizontally at hip level on every pattern piece to reduce the rise. The second pair are a much better fit but that won’t stop me wearing the grey pair, it doesn’t particularly bother me that they are overly generous because the shaped waistband can’t fall off my hips anyway. Yes the grey pair are very baggy but that’s fine.

The black linen pair are a better fit at the waist, there’s still plenty of room (too much room?) over the thighs but I don’t mind that. Maybe I’ll shave a little off the next pair, or maybe I won’t…

Overall I’m a big fan of the Utility trousers and I’ll probably make more, now that I’m getting better with the fit. The design details are worth the effort but it is a project you’ll want to take some time over, I had to turn off the radio so that I could concentrate completely and I read aloud each instruction several times to ensure I was going the right way. I sewed matching topstitching but you could use a contrast thread, or maybe you could line the waistband and button stand with contrast fabrics? Apart from the pocket bag if you add one there are no other pockets so you could add some in the side seams quite easily I would have thought, or patch pockets on the back perhaps? I quite fancy a pair made in chunky cord too…

I hope you find this useful, or I’m happy to try and help if I can.

Until next time, happy sewing

Sue

Simple Sew Chelsea Collection blouse hack.

A lot has happened since I wrote my last Simple Sew blog post, Christmas for one thing, and I had a lovely holiday in the sunshine too but now we are all confined to our homes because of Covid 19. Without wishing to trivialise the gravity of this situation, one of the side effects of it is that you might have more time to sew. 

I’ve had a rummage through my Simple Sew patterns to find one which I haven’t already shown you, and which has opportunities to hack, and I settled on the Chelsea Collection. This is a capsule wardrobe of a short sleeve blouse with two variations, a pair of trousers and a button-front skirt in two lengths. I liked the blouse with it’s shirred sleeves and keyhole back detail but I decided to mix it up a little by adding a button front. Normally we are able to select fabric from a couple of generous sponsors but I wanted to ‘shop my stash’ to find something this time. I found a very pretty vibrant floral John Kaldor cotton lawn which I think I picked up from a swap table sometime and I knew would work well for the blouse. 

I didn’t want the blouse to be overly tight so, after checking my measurements I opted for a larger size than I’ve made previously. If you’ve been a regular reader of my posts you’ll know that I tend to check Simple Sew patterns for any discrepancies before I start. There didn’t seem to be any glaring ones but I just added a slight curve to the back hem so that it dipped in the same way as the front and I trued the shoulder seams so there was a smooth flow from front to back. 

Adding a curved hem to the back, I measured the distance from the lengthen/shorten line on the front then made the back the same amount, curving the line gently upwards to the side seam.
trueing the shoulder seams

As I wanted to alter the front significantly I had to make some changes there first. In order to create a button-stand I simply added 2.5cms to the centre front all the way down what would have been the fold. [2.5cms was a fairly arbitrary figure because it depends really on what size buttons you’re using, a general rule of thumb is that the bigger the button the bigger the button-stand needs to be so that there’s enough overlap and the garment doesn’t end up too tight because the overlap isn’t big enough.]I was able to do this by drawing directly onto the tissue before cutting the piece out as there was enough space to do so.

adding the button stand to the front

If you’ve already cut a pattern that you want to add to just stick some extra paper to the centre front fold line, or trace off the whole piece again adding the extra. The original front had a facing for the neckline so now I needed to create a new facing which would neaten both the neck edge and the button-stand. To do this I simply traced off the whole of the new front opening including the neck edge and made the facing a depth of 7cms all the way down from shoulder to hem, with a smooth and gradual curve. The photo should make this clearer. The back neck needed a new facing too because the existing one took the armhole into account. Again I traced off the section I needed making it 7cms at the shoulders to match the front facing. 

The final change I made was to lengthen the sleeve a little and add some more fullness to it. I started by making the sleeve 5cms longer and then I drew 3 vertical lines on the pattern at approximately the front notch, back notch and shoulder seam points. [Depending how much extra fullness you want to add to a sleeve you could use more places than this but do try to space them evenly apart.] Next I cut up each line from the bottom until I reached almost the top, I left this very slightly attached. With the piece flat on the table I spread the bottom of each slit by about the same amount, probably about 4 cms, then taped slithers of paper into each gap.

First I added the extra length and then drew the vertical lines where I wanted the extra fullness.
Next I opened each part to add the extra being careful to keep the pieces flat and not twisting or wrinkling up, put extra pieces of paper under the gaps. Once you’re happy tape them in position,
Once I had added the extra I cut the piece out.

If you don’t want to cut the pattern up you can do the same process by still marking the vertical lines on then pivoting the uncut pattern at the top of each line, use a pencil or your finger as the axis. Draw or trace around the first section, which remains stationary, then each subsequent section after you pivot it to so that you get the extra fullness being added at the hem. Opening up the wedges in this way means you’re adding fullness to the hem but not the crown of the sleeve, if you want extra fullness in the crown spread the whole piece more or less parallel. The grainline should run equidistant down the centre of the new piece (unless you want to cut it on the bias)

Having done all this I cut it out and was ready to sew! 

I started by joining the shoulder seams of both the blouse and the facings (which I’d interfaced and neatened) then I attached the facings to the neck edge, turned, understitched and pressed. The keyhole back calls for a small rouleau tube as a button-loop which needs to be inserted at the same time as applying the facing although you could choose to make a hand sewn thread loop and stitch that at the end. In fact it isn’t even vital that this is a functioning loop if you’ve got a front opening, the keyhole is purely decorative now. 

I put the blouse onto Doris to check it was looking OK and this was when I found that the keyhole appeared to be bagging outwards quite significantly. I decided not to do anything at this point and I would check again once I had sewed the side seams and put the sleeves in, then I would get a better idea by trying it on myself. 

Checking the front neck
With the loop pinned I discovered that the keyhole didn’t sit flat.
It seems to stick out quite significantly on Doris.
If the button isn’t done up it would look like this.

I made three rows of shirring on the sleeves next, using my quilting guide to make sure the first row was 5cms from the bottom edge, the next two rows were then sewn parallel to the first. [Refer to a previous blog post on how to sew shirring if you haven’t done so before] Next I sewed up the sleeve seams and pin-hemmed the bottom edge to give a neat finish.

I positioned the needle 5cms from the cut edge and the quilting guide helps me as a visual marker to keep it parallel all the way.
Shirring is stitched from the right side so that the elastic is on the reverse. Use a long straight stitch, secure both ends and then apply plenty of steam to shrink up the stitching further.
finished sleeve

After sewing up and neatening the side seams I inserted the sleeves. At this point I tried the blouse on again to check the keyhole on myself and, with real shoulder blades under it, it didn’t seem so noticeable. Two other things struck me though, the blouse was a little too big so I took it in on the side seams and also the blouse was a bit shorter than I expected. In order to take as a small a hem as possible I made some bias binding from offcuts of the fabric then stitched it (folded in half lengthways and with the cut edges together) to the hem using a narrow 5mm seam allowance [This is a useful finish to any hem or edge where you need every spare centimetre of fabric.] Have a look at the photo which shows you how to get the ends of the binding enclosed within the front facing. I turned the binding up and top-stitched in place. 

If you’re adding binding when there’s also a facing pin it like this so that the end is neatly enclosed inside the facing when it’s turned right side out.

Finally, I found some ‘vintage’ buttons amongst my treasure trove and there were just the right number meaning the whole blouse had been sourced from what I already have!

Well I hope now that I’ve made it that I’ll have a chance to wear my Chelsea blouse somewhere other than in my own garden this summer, who knows? Maybe you’re reading this long after the emergency ended and life has returned to some sort of normality, although it definitely won’t be exactly as it was before.

Sewing our own clothes is an activity which gives us so much enjoyment for a variety of different reasons and, right now, the simple act of creating something is chief amongst them for me. It’s absorbing and the problem-solving gives me something else to think about.

I think the keyhole back is, by and large, just about acceptable when I’m wearing the blouse. I also think the cure could be to add a centre back seam instead of cutting on the fold so that the point of the keyhole could extend beyond the centre back line, this would hopefully bring the button and loop closer to one another when they are done up…this is just my theory based on experience and I haven’t tried it out. It’s such a nice little detail that I’m disappointed it hasn’t worked out quite right. I also regret not reading my fellow Simple Sew bloggers reviews of the blouse because then I would have known how short it comes up, personally I would add a minimum of 8-10cms to the length next time.

The sleeves are pretty and feminine but maybe they are a little too girly, the jury is out…

Until next time, happy sewing

Sue

Simple Sew Cocoon Coat update

If you read my blog reviewing the new Simple Sew Cocoon Jacket a couple of months back then you might recall the crazy-big toile I made to start with. I didn’t want the fabric to go to waste and so eventually I went back to it to finish. Because it’s a checked fabric I had cut it carefully to match even though it was only for a toile originally. [Since writing the original blog its been brought to my attention that the instructions for joining the front and back pieces together are currently wrong and show the front piece being attached the wrong way up! I’ve done a little diagram below to show how it should be] I’ve realised I thought I’d misunderstood and put it together intuitively, when actually it was the instructions not me, but this isn’t very helpful to you!

IMG_8963
This is how the diagram looks on the instruction sheet

fullsizeoutput_2aa7
This is how it should go together.

 

 

fullsizeoutput_27fb
The original HUGE toile back in the summer.

Basically I deconstructed the whole thing by unpicking the seams so that it was the main pieces of fronts and backs again, I hadn’t put any facings on it so this process was pretty quick. Once I’d got the pieces broken down I placed the reduced size pattern pieces from which I’d made my denim version on top of the checked fabric, still matching the checks carefully, and recut them smaller. This time I cut out the facings and patch pockets too.

Then I simply made it up in exactly the same way as the denim coat, I didn’t use any decorative topstitching this time though.

I decided not to use the giant poppers for this one so I had a rummage in my button collection and found two HUGE buttons of unknown origin. This presented two problems, firstly I had to work out very precisely where the buttonholes should be sewn so that when the buttons are done up the checks on the front still match (because I’m like that!) and then I discovered that, because the button was far too large for the automatic buttonhole foot, there were actually NO instructions in the guide book for my machine on how to make a freehand outsize buttonhole. This caused me so much head-scratching! I goggled it on the interweb with no luck but then I remembered my friend Anne, who is an expert sewer, has the same machine as me so I messaged her. She agreed there were definitely no instructions (I wasn’t going nuts!) and whilst I’d have to work out the specifics for my particular buttonhole, she pointed me in the right direction and eventually I had two acceptable buttonholes. What a palaver!

 

 

Anyway, I finished it in the end and the Cocoon Coat pattern will be officially released in the next week as the free gift with Sew Now magazine and on their website so everyone will get the chance to try this very simple but stylish coat. [I noticed the website does draw your attention to the generous sizing and I strongly recommend you make a toile or tissue fit first] I’ve made both mine in woven fabrics but you could try it in boiled wool or another fabric which doesn’t need to be faced or neatened. What about a double-faced jersey cloth, perhaps with a soft fleecy side? You could add a collar, or turn-back cuffs? So may possibilities for such a simple garment.

fullsizeoutput_29dcfullsizeoutput_29dfIMG_8725

I’ve had lots of wear from the denim coat, it’s been really versatile because it isn’t too heavy but there’s room for layers underneath when it gets a bit cooler. What will you make yours in?

Until next time,

Happy sewing

Sue

I made a coat!! Butterick 6423 to be precise…

Two years ago I did a 10 week tailoring course at Morley College, London but it’s taken me until now to actually make my own coat. I settled on Butterick 6423 partly because it’s a fairly similar silhouette to a RTW coat I already own and wear a lot, and then, ironically, it came free with Love Sewing magazine just before Christmas.

Butterick coat

Added to this I had 3 metres of lovely turquoise-coloured wool in my stash that was gifted to me about a year ago by a friend who was clearing out her mother’s belongings and wanted the fabrics and patterns (LOTS of them) to go to an appreciative home. Not only that, I had just under 2 metres of almost psychedelic lining fabric which came from a different elderly lady ( I had no idea what to do with it at the time but, as is often the way, it goes really well with this wool)

Because I had plenty of fabric, which makes a change for me as I tend to underestimate, I could cut out the coat without having to watch every centimetre. I didn’t have quite enough lining though so I cut all the pieces which would be visible inside the main body and the sleeve linings I cut from plain lining, again from my stash.

fullsizeoutput_20df
Sleeve lining, with 4cms of the length folded out

Initially, before I cut the fabric, I pinned the tissue together to check it on my dress-stand. I chose to take 3cms out of the overall body length and 4cms out of the sleeves because they seemed terribly long. This proved to be sensible as you’ll see in the finished garment.

IMG_4433
I used loads of good old-fashioned tailor’s tacks on all the balance marks, I’m not always this meticulous but it proved invaluable for this project.

IMG_4435
coming together slowly…

I found the instructions very clear to follow and I don’t think at any time did I get in a muddle although I do think a common problem with the ‘big’ pattern companies is that the diagrams can be very small making it difficult to see exactly what you should be doing, particularly areas like clipping into important corners eg at the collar/shoulder seam.

Because I do a lot of alterations for people I’ve noticed various techniques employed in the construction of RTW garments. Cuffs, for example, are usually stabilised with iron-on interfacing of some kind so that’s what I did here.

By doing this it stops the cuff from stretching (my fabric is fairly loosely woven too) and gives it firmness and stability. I bought my iron-on interfacing in Goldhawk Rd, London so I can’t really give much detail about it except to say I was told it’s suitable for woollens and tailoring with a light jersey backing. I used it on the collar facing too and it seems to be absolutely fine. You could use a firmer one if you wish, that would make the collar firmer than mine.

There are a few places where you’re told to hand sew hand, attaching the sleeve lining to the inside of the cuffs for example, but if you’re not a fan of hand sewing  it is possible to do this by machine, you just need to get them pinned correctly (double-check you’ve got it right first by turning the sleeve right-side out before you sew it)

IMG_0017
I sewed up the sleeve hems inside using herringbone stitch.

It’s also worth attaching a small amount of the sleeve-lining seam to the sleeve seam inside, this stops any chance of the lining sliding out of the end of the sleeve.

You can do this on the machine, or a few running stitches will do the job.

IMG_0021
This is the inside of the back-neck collar seam. I’ve pinned them together and then stitched to keep the seam from shifting about.

Making the back pleat needs a bit of concentration partly because the lining gets stitched together with it-this makes sense because it reduces the bulk if you’d done them each separately. I opted to partly stitch the pleat together for about 10cms down from the top simply so that it didn’t have a chance to be to flappy in wear. IMG_0024

Once the pleat section is sewn on the instructions say to slip-stitch the lining down. Again, it’s possible to do this on the machine, you need to work your way into the right place by going in through the gap at the front between the facing and the coat front. IMG_0023

IMG_0025

I sewed the coat hem up using herringbone stitch because I think it holds a hem nice and firmly. You sew this stitch from left to right, looping each stitch backwards from the previous one, one above then one below.

Throughout the making process I pressed often and used plenty of steam, with a pressing cloth to prevent shine. If you’re using pure wool you can press and re-press because it’s very forgiving although be more careful if you’re using a fabric that isn’t well or is made with mixed fibres. As my tutor on the tailoring course often said, “steam is your friend” A tailor’s ham is a great boon too because it will enable you to press in tricky areas or under curves seams, for example.

The lining hem was just turned and machined. To neaten the bottom of the front facing I applied a little bit of self-made bias binding, it’s looks nice and it doesn’t add the bulk that turning the edge over could do.IMG_0027

I also added 2 small loops of fabric to hold the lining and the coat together at the side seams, again this stops it flapping about in wear.IMG_0028

I added a hanging loop at the neck which I should have sewn on by machine at an earlier stage but I forgot so I had to sew it on by hand at the end.IMG_0029

IMG_0030
I sewed a few stitches through the CB neck seams to secure the collar facing and under-collar to each other.

The last thing to do is the single buttonhole. I had a rummage for a suitable button first and I came up with a single beautiful mother-of-pearl one which I’d bought a couple of years ago, simply because it’s lovely! I paid £1 for it and I’ve actually left the tiny price label on the back, just because…

I created a surround of tacking stitches to hold the area firm and stable before sewing the buttonhole. I did several trial ones first because my Pfaff is so new to me and I didn’t want to mess it up at this late stage. Unfortunately the thread I’d used for the whole garment was clearly too dark in such a prominent position so I had to go and buy a single reel of thread just for the buttonhole! When I sewed the button on I sewed another small button on behind it so that the fabric doesn’t have to take all the strain of a button being done up and undone constantly.

This is a coat with a slightly retro aesthetic, it’s a little bit 50’s, the back is a little bit 20’s. The result though is modern and wearable and I’m really happy with it.IMG_0060

I love the fun lining inside too. The wool fabric isn’t that thick though so I don’t think I’ll be wearing it when it’s very cold although there is room for a jumper underneath.

fullsizeoutput_2113fullsizeoutput_2111fullsizeoutput_210d

fullsizeoutput_210e
You can see where I’ve sewn up the pleat by about 10-12cms.

As you will have noticed it’s a difficult colour to photograph accurately, the outdoor ones are probably the closest to the real shade.

It’s been an enjoyable process, I took my time over it and I’m very happy with the result. It would be a good project to try if you’re becoming a bit more experienced with your sewing, nothing is terribly tricky, buy suitable but not too expensive fabric and take your time! I’m glad I took some of the length out of the body and sleeves as they would have been very long. I made the size medium and it was plenty big enough, I think the sizing is definitely on the generous-side though so don’t be tempted to go up a size, make a toile if you need to or tissue fit if you can. I didn’t bother neatening any of the seams inside because all of them were going to be enclosed but you could choose to leave the coat unlined and then bind all the seams (Hong Kong finish) which is practical and attractive.

…and the coat cost me barely anything at all!

Because it was the free pattern with Love Sewing I expect there will be lots of versions of this coat popping up over the winter so it will be fun to see how they all vary. Have you made this pattern, I’d love to know how you got on?

Happy Sewing

Sue

Cleo from Tilly and the Buttons

fullsizeoutput_203e

Have you ever found that just once in a while your off-spring are listening when you drop clanging great hints about what you’d like for Xmas?

I get the regular Tilly and the Buttons email updates and in early December received the one about Cleo kits, a complete fabric/pattern/thread/trims bundle at a reasonable price. My daughter happened to be lurking nearby so I casually mentioned this….

Anyway, I was quite startled when by chance the first gift I opened on Christmas morning was exactly that! whoop whoop! Of course I then thought there was no time until the New Year to start it but I remembered I’d bought a small quantity of peacock corduroy at the Rag Market in Birmingham when I went up for Sew Brum in October, I’d already pre-washed it so it was ready to go and a window of opportunity opened up so off I went.

In my opinion I’ve always found Tilly’s instruction booklets very clear and helpful, there’s lots of useful info if you’re a novice and the plan of making in the form of colour photos are excellent too. I decided that rather than use the bib-and-brace fixings for this one I’d use buttons and buttonholes instead.

This would also give me the chance to try out some of the features on my new toy…just before Christmas I finally invested (with my own hard-earned cash) in a Pfaff Quilt Ambition 2.0 from Sew Essential. They had it as a Black Friday (not a real thing) offer and, after driving for 2 hours to visit them and try it out, I bought one! [thank you to Irena for being patient with me while I got to grips with it, I’d really recommend you try out any machine you’re thinking of buying and Sew Essential are happy for you to visit for a demonstration of the various models and makes that they sell] IMG_4268

Cleo takes not a lot of fabric (if you’re using corduroy do bear in mind that it has a ‘nap’ or pile so cut all your pieces going in one direction or it will shade) I decided that rather than make the patch pockets by turning the edges under I’d bag them out with some scraps of Liberty Tana lawn I had. This has the additional benefit of giving them lovely neat edges, and once I’d stitched them on I tried out the bar tack feature on my machine. It’s a good way of reinforcing pockets and other potential weak points, or attaching belt loops.

IMG_4360
a rather natty bar tack on the pocket

There was just enough Liberty fabric to make a hem facing too using 2 straight strips too so this was a good way of neatening the hem without it being bulky.

fullsizeoutput_20ce
I cut the strips twice as deep as I wanted it to be when it was folded in half.

fullsizeoutput_20cf
the strips folded over

fullsizeoutput_20d1
The cut edges are then matched to the raw edges on the cord and stitched in position. I stitched each on separately because then I sewed all the way down the side seams and the facings too.

After I sewed up the side seams I under-stitched and pressed up the facing. Next I used the top-stitch to secure it.

IMG_4359
I used the additional edge guide for the topstitching as I wanted the hem deeper than the usual seam allowance markings.

fullsizeoutput_20d4
The triple stitch gives a nice chunky top-stitch and the facing is under-stitched to help it roll upwards.

It was lovely to be able to make the buttonholes using the one-step buttonhole feature too, my previous machine didn’t have this method. I tried out a couple of test ones but then the first buttonhole on the dress wasn’t so great because I touched the ‘stop’ lever accidentally as it was sewing so it reversed before it finished sewing the complete side-oops.

IMG_4361
oh dear-user error

IMG_4415

These are the most erratic colour photos, sorry about that, it’s a really tricky colour to photograph accurately.

Many of you reading this will probably already be familiar with the Cleo so I’ve concentrated on what I’ve done to make mine unique to me and not so much on the step-by-step aspect of making it. I’m happy with the fit of this first one so as soon as I’ve washed the burgundy I’ll get the ‘Christmas’ one made up too. I’ve made the shorter length version, I’m not sure if I like the longer version as much in truth but who knows, I might give it a go sometime.

fullsizeoutput_2055

fullsizeoutput_2052
My top is the Amy from Zierstoff patterns in a slightly sparkly jersey from Escape & Create in St Ives, Cambs. I love the long wrinkly cuffs although it might be that my arms are too short… (that’s another blog waiting to be written too as I’ve made 3 variations of it now)

Tilly often create these pattern/fabric bundles so check out their website to see what is currently available. The Cleo has been super-comfortable in this post-Christmas podgy period-or is that just me?-and I can see why it’s been so popular as a pattern, it’s quick, it’s simple and it’s fun and comfy to wear-what more could you want?

Happy Sewing

Sue