My latest Backstitch project, the Ingrid dress by Homer and Howells


It’s been a while since I wrote my first blog post for Backstitch way back in January but I’m happy to say that I have loved wearing the Ellsworth shirt I made then, it’s been a great addition to my wardrobe. 

For my second post I’ve sewn a Homer and Howells Ingrid dress. Like many popular styles circulating this year it’s a loose-fitting dress but the USP of the Ingrid is its unusual asymmetric style lines. 

The front and back are both quartered by differing horizontal and diagonal seams, plus the bust shaping is in the form of tucks in the centre front seam. It pops on over the head so no zips to insert, there are inseam pockets and a choice of two skirt lengths and two sleeve shapes. 

I felt with all this unusual seaming going on that I didn’t want a busy printed fabric which disguised it (that said, you could have fun with stripes or even checks) My original plan was to use needlecord and deliberately cut the pieces in opposite directions to highlight the shading this would create. 

However I wasn’t sure that any of the colours available in the shop at the time I was making it were really very ‘me’ so I plumped for the saffron yellow Broderie Anglaise double gauze instead! [I made this handbrake turn decision partly based on having recently seen a woman wearing a similar style RTW dress made in grey Broderie Anglaise and the fabric looked great, not too ‘girly’ or twee at all]

The stitching on Broderie Anglaise fabric usually has a right and a wrong side if you look closely at the embroidery but it isn’t always very obvious. My advice would be to choose the side you prefer and stick to it throughout! Because virtually every piece of the Ingrid is cut as a single I pinned paper labels onto each one so that I didn’t get them mixed up. Alternatively you could use small sticky dots to differentiate.

I gave the fabric a pre-wash before cutting, there was virtually no dye run and no obvious shrinkage either. Because of its asymmetric shape the Ingrid is almost all cut from a single layer of fabric so I would highly recommend keeping each pattern piece attached to the fabric until you’re ready to use them, or label them as I’ve suggested earlier. [Incidentally, if ever you’re short of fabric for a project, check if you can cut it out of a single layer rather than folded, it’s always more economical…just make sure you mirror everything as necessary] Helpfully Backstitch sell their fabrics in 25cm increments which can mean a lot less wastage, I bought 2m25 for this dress.

I pinned rough labels to the pieces so that I knew exactly which one was which.

I found the instructions and diagrams for construction nice and clear and very straightforward, do read them through a couple of times first though because I made assumptions about the order of making in a couple of places which would have led me up the garden path and some unpicking. The right and left dress parts are sewn tops to skirts before joining vertically at the centre front and back. Some of the seams which would normally match one another on more conventional styles don’t on the Ingrid because of the asymmetry but if you start pinning at the top of each seam down to the hem you should be fine. 

The fabric sewed up nicely although be aware that the weave of double gauze causes it to have a little inherent stretch so try not to pull it about too much during construction, and pressing causes some of the natural crinkles of the cloth to flatten as well but they will bounce back after the next wash. 

I made a couple of other small deviations from the pattern by using self-fabric bias binding instead of the neck facing. I cut a bias strip 4cms wide, folded and pressed it lengthwise before sewing the two cut edges to the neckline on the dress. Next, I understitched the seam to the inside then finally topstitched it down to finish. I also chose to sew my own thread loop for the button at the back neck rather than try to make a rouleau loop with such ‘bobbly’ fabric, I was delighted to find a button in the shop which is a great match to the fabric colour. 

marking the centre front point on my folded binding
Pinning the bias binding in position
Close up of the centre front seam details

I wasn’t convinced that either skirt length would be quite right on me so I went somewhere in between, finishing a little below knee length (I’m 5’5”) I wanted longer sleeves too so I used a bell-shaped pattern with a cuff which I had drafted myself for a different dress earlier in the year. 

My sleeve has a fixed cuff with gentle gathers (incidentally, the colour here is paler than in reality, the outdoor photos of the finished dress are much more accurate)

Finally, I turned up the hem by 2.5cms and then used one of the huge range of embroidery stitches on my Pfaff machine to sew it up, it took a while to go all the way around the hem but I love the little detail it gives. 

The hem is finished with a machine embroidery stitch

The only fitting change I will probably make if/when I sew another Ingrid is to slightly reduce the width of the shoulders, the sleeves cause them to droop off my shoulders a little but it’s not a major issue. I sewed the UK14 with no fitting adjustments other than the length and it’s very comfortable.

The back seams are asymmetric too
The button and hand-sewn loop

Thank you to Backstitch for providing me with the fabric and supplies to sew with by means of gift vouchers, the Ingrid is not currently stocked in the shop though. Broderie Anglaise might not be typical winter fabric but I love the sunny colour on a miserable English day.

I hope you’ve found my review helpful, until next time,

Happy sewing
Sue

The Maker’s Atelier asymmetric gather dress

In the summer of 2021 Simply Sewing magazine invited me to choose an Indie brand pattern to sew and review for them. After some deliberation I settled on the Maker’s Atelier Asymmetric Gather dress which they generously provided me with free of charge. The article was published a year ago now but if you didn’t see it then I’m sharing some of my thoughts about the pattern here.

I like Maker’s Atelier patterns because they are deceptively simple to look at but many of them have stylish details such as notched hems, interesting seam lines, button-up backs or gathered sections which can elevate the garment out of the ordinary. On their website, and also in their newsletter, they always illustrate how much variety you can create from reusing a single pattern simply by sewing it in different fabric-types. I’ve made numerous iterations of their Holiday Shirt and Top using a number of different fabrics and embellishments for example.

If you’ve seen my various makes of Trend Patterns you’ll already know I’m rather fond of an asymmetric style and although the Maker’s Atelier one is a simple cocoon-shaped shift dress the gathered features really lift it out of the ordinary.

Because the front pattern piece is cut as a whole ‘right side up’ by flipping the piece over you can have the gathered neckline to the right or left depending on your preference. I love how the back is given shape and definition by adding the wide elastic at waist level too. 

I made this first version in gingko-printed crepe fabric bought at least four years ago from Fabrics Galore.

The style works best using a fabric that gathers softly and has some drape which is why the viscose twill kindly given to me by Sew Me Sunshine worked well. I wanted a fabric with a little bit of weight to it so that the elastication looked right, a stiff fabric without any fluidity would not flow nicely over the contours of the body. I really wanted a design that would look interesting whether it was gathered or not. This particular fabric from Mind the Maker contains 100% LENZING™ ECOVERO™ Viscose, which is a sustainably certified viscose fibre by LENZING™ with minimal environmental impact in the production process (compared to production of traditional viscose fibres). Some fibre and fabric production methods can be very damaging to the environment and the work force so this is at least a step in the right direction.

It was very satisfying to see the shape come together once I’d inserted the elastic, I know it probably sounds odd but I do love a bit of understitching on a facing. However I’ve found the back neck facing keeps creeping up though so I need to find a way to fix that.

Viscose often shifts around quite a lot so it’s important to not pull or drag it too much while you’re laying it up so that your pieces aren’t distorted once you’ve cut them out. If you have to cut on a table which isn’t quite big enough make sure the overhanging fabric is at least supported on a chair to prevent it pulling the fabric on the table out of shape. If you can manage to cut on the floor that would probably be preferable. Thankfully there aren’t many pattern pieces though so it isn’t a complex lay-plan.

My measurements at the time fell between a UK 12 and 14 so I measured the front and back pattern pieces to work out what the finished bust and hip sizes would be, from these I opted to sew a UK12. I was happy with the final fit, there’s just enough fullness without becoming too voluminous and baggy. I’m 5’5” tall and a little ‘pear-shaped’ but this style would suit a variety of body shapes because it skims over the waist and thigh area, it isn’t a ‘fitted’ style. The elasticated sections on the hip and back give the slightly-cocoon shape some definition and this could be adjusted to your personal preference. I’ve gained few pounds since I last summer but the dress still looks okay I think.

At Eltham Palace in south London, summer 2021

The one major adjustment I made was to shorten the pattern by 5cms before cutting out. I read a few online reviews before I started which all said they wish they had, or they did, make it shorter. I’m happy with how the finished length looks on me, it would definitely not have looked right if I’d left it as it was. I took the 5cms out horizontally across the front and back just below the hip/knee area, not from the hem. If you shorten it from the hem you will make the shape at the bottom a little wider which might result in it losing a little of its ‘peg’ shaping. The only other thing I did was to slightly raise the position of the elastic channels on the back and hip by approximately 1.5cms so that proportionately they sit a little higher on me, I think it looks better. 

An easy hack would be to use a narrower elastic than suggested, or sew two or more rows of narrower elastic into channels, you could even use shirring elastic. Instead of elastication how about slotting ribbon or tape through the channels, sew buttonholes for the tape and leave the ends dangling so that they are decorative and adjustable, perhaps finish the ends with small toggles to make a feature of them? Leave the sleeves off completely maybe or turn them into full-length sleeves with elasticated cuffs, or a cap sleeve. If you’re feeling adventurous you could even elasticate the hem! What about having fun playing with the grain line, especially if you use a check or striped fabric. There aren’t any pockets so you could add at least one in-seam pocket, probably on the non-elasticated side seam.

As well as viscose-types like I’ve used you could also choose fabrics such as handkerchief or washed linens, crepe, softer types of satin, crepe de Chine, challis and wool crepe. Softer cottons like lawn or chambray-types would all work well too. You don’t want anything overly stiff or thick because you wouldn’t get the lovely definition to the elasticated folds, they could become a bit clunky. Ideally avoid fabrics which crease badly if you might be sitting in it for any length of time, creases would spoil the look of the front. 

I chose to trace off the pattern, I find I’m doing this more and more often even though I’m not a big fan of doing so. Take your time if you’re tracing the pattern, transfer all the markings accurately. Because the neckline is asymmetric make sure you cut the neck facing to match and double check you have a mirrored any pieces that are a pair before cutting into your fabric. Read through all the making instructions before you start and highlight any areas that you think are, or might be, trickier for you. 

The Asymmetric Gather dress isn’t a difficult garment to sew up, I would say anyone from an adventurous beginner upwards would enjoy making it. It certainly took me less than a day to make, especially as there are no openings like zips or buttons to construct. 

I’ve found it entertaining to see my changing hairstyle since I first made this! I was paid for the original article last year but all thoughts, advice and opinions are my own.

until next time

Happy sewing

Sue

Sidewinder pants by The Sewing Revival

The Sidewinder pants are my third make using a pattern from The Sewing Revival following on from several versions of their Heron dress and Bellbird top. I’ve already written reviews of them which you can read about here and here, plus I made a new version of the Bellbird at the recent Sewing Weekender in Cambridge, organised by The Fold Line.

The Sidewinders are a very simple pull-on trouser pattern with a tapered leg but their USP is the diagonal side seam which gives them such an interesting ‘twist’. They are flat-fronted with an elasticated back waist and of course there are pockets in the seams too. There are variations at the hem too as you can choose plain full-length, 7/8ths with turn-ups like mine or use wide elastic to gather the hem into cuffs. As you can see from the artwork they could be very casual or dressed up with heels, fabrics with a bit of body but some drape and softness are suggested. Like the other Sewing Revival patterns these are PDFs so you can buy, download and print your pattern any time, or have them printed for you on A0.

As I’ve come to expect with SR patterns the instructions and illustrations are very clear and personally I’ve always found their sizing very good too. I cut the large based on my measurements although I did decide to shorten the leg length very slightly as I didn’t want them ‘pooling’ around my ankles too much, the idea is that they sit above the ankle bone. The instructions tell you what length of elastic to cut for the back waist which you can then adjust to suit.

For the first pair I used some Royal blue crepe fabric which was leftover from the Trend Asymmetric dress I made last year. If you’re using a plain fabric these trousers are surprisingly economical to cut and if you’re short of fabric you could cut the pocket bags and waist band facings from other fabrics too. You could have fun with stripes or checks to give them a bit of a Vivienne Westwood vibe but you’d need more fabric for that. What about using ribbon or piping down the side seam for emphasis?

Construction is very quick, I’d say that this could be a half-day project if you aren’t getting fancy with pattern-matching. I really like the way that the waistband is a facing because when it folds over the top it secures the pocket bags in place, you only need to neaten the lower edges of them. The elastic gets slotted through the back channel which extends slightly around to the front beyond the ‘normal’ side seam position. Once this is stitched in place you sew down the facing at the front. This line of stitching isn’t near the edge, it’s approximately 3.5-4cms away depending on the width of your elastic so use a guide of some kind to keep it parallel, I always use the quilting guide which comes with my machine or you could use Washi tape or similar stuck onto the bed (I’m not keen on this personally as I wouldn’t any sticky residue near my fabrics but I know others use this method)

These are the second pair which I made at the Weekender and that is why some of the overlocking is different colours.

As I said earlier I’ve made both versions with a small turn-up so once I’ve turned them up I stitched through seam lines of the inner and outer leg seams to hold the turn-up securely in position.

You’ll notice from the grey version that I contrast top-stitched in pink either side of the outer leg seams to give some emphasis to the diagonal seam, I like how it goes ‘off’ at the hem.

The blue pair are sooo comfortable because the crepe fabric has quite a bit of natural give, and the back elastic gives a nice snug fit without being too tight. My blouse here is a longtime favourite, the Imogen from Sew Me Something
There was enough fabric to make a belt which ended up being massively long so it goes round twice into a big bow!
And these are the grey pair which I teamed with the second garment I started (but didn’t finish!) at the Weekender which is another Sewing Revival Bellbird made in a very lightweight woven check cotton which I picked up on a swap table somewhere last year. The label was given to us by lovely Harriet of Sew me Sunshine which is a really nice reminder of what I made and where!

Janine at The Sewing Revival generously provided me with the pattern for the Sidewinders and I’ve been more than happy to write a review because I love these trousers! I’m planning to make more for the winter and I’ll definitely give a gathered ankle pair a try too.

After a few weeks of sewing for others, writing (and then completely rewriting the Sew Over 50 birthday blog post because I lost ALL 4000+ words!!!!) and being away from home it’s lovely to get back to a bit of sewing for myself and sharing my thoughts with you. I’m so happy that I discovered The Sewing Revival as a result of our first Sew Over 50 challenge at the beginning of the year, did you find any new patterns brands as a result too, that was certainly our hope.

Until next time,

Happy Sewing

Sue

The Frilled Hem Top from Trend Patterns

Trend are fashion-forward indie pattern company based in London and I’ve already used their Asymmetric Dress pattern twice (and reviewed it here) I even wore the first one for the Love Sewing magazine Sew Over 50 photo shoot too because I felt it was such a striking but wearable dress that it deserved to be seen in a national sewing publication!

I made this version in brocade for our cruise to celebrate our 30th wedding anniversary in March…
…and it has a pocket!

The next Trend pattern I’ve decided to tackle is the Frilled Hem Top TPC5 and it’s another goody as far as I’m concerned. As well as the ruffle detail it features some interesting diagonal seam lines (there’s no side seam) The degree of difficulty is described as moderate and I’d agree with that because although the techniques used aren’t difficult you need to keep your wits about you to ensure that you’re attaching the pieces to the right seams, it could be easy to lose sight of which way up they are because the usual ‘landmarks’ like armholes or necklines aren’t so obvious. There are photographs as well as written instructions, which are fairly clear, at the end of the day it’s a simple top and so long as the ruffle goes in first attached to the right pieces then adding the back yoke and sleeves is straightforward. I hadn’t got a suitable zip, I’d thought about using an exposed metal zip but the one I had in my stash was too chunky for the weight of the fabric so I opted for a simple button and hand sewn loop closure instead.

My fabric was a very thin cotton I’d picked up from a swap sometime ago-I couldn’t really say what it is as it isn’t soft like lawn, or sheer like voile, it’s slightly more crisp like poplin but less weighty. Whatever, it’s worked just fine for this and it didn’t cost me anything!

As I was making the top at this year’s Stitchroom Sewcial I was fortunate to be able to use the industrial rolled hem machine to finish the edge of the ruffle, it’s super-quick and neat and took me about 30 seconds to hem the whole piece instead of my usual pin-hem finish which would take at least half an hour!

As I didn’t have much fabric, plus I wanted to wear it as a summer top, I cut the sleeves down to short length. I was a little concerned that they looked like they may be a bit snug on my not-very-slim arms, the bicep measurement seemed to be ok but the crown looked narrow. I decided to go ahead and insert the sleeves and actually they are just fine as you can see from the photos. As there is no underarm seam to match the sleeve to it’s vital that the shoulder/sleeve head notches are marked or you’ll struggle to insert them properly. I’ve made a straight-from-the-packet size 14 again and the fit is spot on for me with no alterations, it’s a good fit across the shoulders and upper chest area and then flares out over the hips.

There are two points in the instructions which are useful and important to follow. The first is very simple, it tells you to ’sink stitch’ (that’s what it always was until ’stitch in the ditch’ became a thing) through the shoulder seams to hold the neck facings securely in position, this is both quicker and more effective than hand stitching them down I always think. The second point is that you can’t sew the whole hem up all in one go, you’ll need to sew the centre front section, stop, move the frill out of the way and then recommence the rest of the hem. If you don’t you’ll just sew over the frill which will look terrible.

You’ll need to sew the hem between the frills separately to the rest of the hem, moving the frill out of the way.
I finished off the neckline with a button and loop.
I love this detail where the frill, the back and the side all meet.

So that’s the Frilled Hem Top, it should probably take around half to a whole day to make, it took me longer because I was nattering at the Sewcial quite a lot, and then I made a super-quick Mandy Boat T-shirt using the industrial coverlock machines in between too.

This was my other Sewcial make, the Mandy Boat Tee which is a free pattern from Tessuti. I’ve made it in a gorgeous jersey form Lamazi Fabrics which I’ve learnt was recently discontinued.
If you’re interested in the jeans they are Megan Nielsen Ash which I tested nearly two years ago and I LOVE wearing.

The TPC5 takes a little under 2 metres of fabric, probably less if you’re making it sleeveless or short sleeves. The size range isn’t extensive, 6-16 UK sizes, and they aren’t the cheapest but I’ve been very happy with the two I have and I’ll definitely make some more variations of this particular pattern. You could create some really interesting looks by using contrasting fabrics or colours, or leave out the frill completely to show off the unusual seam lines?

Trend have a wide range of patterns now, which don’t necessarily appeal to everyone but I think they are well worth a look at because of their unusual styling and details. They may look scarily fashion-forward but if you want something which is less predictable and run-of-the-mill in a sea of ‘meh’ patterns then, in my unsolicited opinion, they are a good bet. They often have a flash discount offer too so keep your eyes peeled for them!

Until next time, Happy Sewing

Sue

the day some Sew Over 50 gals did a bit of modelling!

Finally I can talk about the day last November when a group of us travelled to Love Sewing magazine headquarters in Stockport to take part in a photoshoot for a Sew Over 50 article.

Sew Over 50 had begun in August and was gaining a huge following so when editor Amy asked if we could suggest possible models for an article Judith and I approached quite a large diverse group of women initially to see who might be willing or able to travel to Stockport. Not everyone could but eventually we had a group of 10 people.

It was amazing how far some were willing to travel, Corrie and Sara both came from Wales, Judith is usually in Edinburgh and myself, Ruth and Sue were all travelling from Hertfordshire. So the 3 of us decided it would be a good idea to drive to Milton Keynes first and then get the train the rest of the way. Simple? far from it! I checked before booking the train that there was a car park, not pre-bookable unfortunately, but it was a large car park so what could possibly go wrong….Well it turned out that the car park was completely full [and no sign or barrier telling you that before going in and driving all the way to the top floor and down again thus wasting 10 precious minutes] we spent another 15 fruitless minutes driving around and around trying to find ANY alternative until the only possible option was for me to drop Ruth off at the station with her train ticket (and Sue’s too because she wasn’t with us, we didn’t know where she was at that point, probably still driving around too!) Anyway, in the end I drove all the way to Stockport because I was bloody determined that after all the planning I wasn’t going to miss the event! Rant over.

ladies who lunch…without me, but at least Ruth and Sue made it in time.
pre-chat…
Corrie in the make up chair

By the time I got there everyone was chatting away happily, having make up applied, there was a rail full of everyone’s beautiful makes which they had carefully selected to bring. Amy was in the process of grouping the clothes into colour stories and you can see from the eventual photos that it was almost like we had planned it that way. A few of us have met before in real life but for others it was new experience-they had all had a bite of lunch together before I got there-but naturally chatting didn’t prove too difficult anyway. I’ve been fortunate enough to have a Love Sewing photoshoot before so I knew what to expect, this time it was so lovely to have company. Amy hasn’t had this number of ‘models’ to deal with before and I think it was a bit like herding cats at times haha.

Getting any of us to stand still or stop talking long enough to take photos was an achievement in itself, there were probably a few blurred ones, but we settled into it and I think Amy was happy with the results eventually. Incidentally, I’m wearing my Trend Patterns Asymmetric Dress which I reviewed here.

Oh do behave Sue!

This is what Amy was dealing with…what am I doing with my arms? 


ooh, it’s a glamorous business

this shot makes me smile

Eventually after we’d all done our group story shots we had a final altogether group when we all piled into the slightly wobbly set with Amy. It’s astonishing that there are any pictures with all of us looking in the right direction with eyes open and mouths shut!

hmmm…

So after all our fun and games the time came for us to head home again. Sadly for me this meant a really long drive but this was made much more bearable by the fact that Ruth came in the car with me so her company made 4 hours pass a lot quicker than the lonely journey up. We have a WhatsApp group with all of us in it and we’ve had many conversations since and we’ve been looking forward to the release of the magazine so that we can share it with everyone.

You’ll know by now too that it coincides with our first SewOver50 challenge so the article will give lots more exposure to that. [If you don’t know what I’m talking about, where have you been? To briefly recap, the aim is to make a garment using a pattern which features a model on the envelope who appears to be at least 45-50 years old. This isn’t as straightforward as it sounds so check my previous two posts here and here which has links to a wide selection that we’ve managed to find. There’s a very disappointing number of patterns from the major pattern companies and whilst the article names McCalls and Simplicity, in truth we could only find about 4 patterns from Simplicity and none from McCalls] Between us on the day we wore a very diverse selection of patterns, from mainstream and independent designers, made in all sorts of fabrics, colours and designs which illustrates the point that whilst we may be getting older we aren’t going to let age get in the way of our sartorial choices or be dictated to by what ’society’ expects us to wear. This is in spite of how pattern companies continue to portray us, their clientele, and until they address how diverse everyone actually is we still have to continue to look beyond the envelope.

27_11_18_Mixture_readers1209.jpg
The final results weren’t bad! On the left Sara is wearing a Joni dress from Tilly and the Buttons ‘Stretch’ book in jersey from Trixie Lixie, Sue’s red Ponte dress is Butterick 5559 which is currently unavailable whilst Ruth has made the Nina Lee Southbank sweater dress in jersey from The Textile Centre.

Amy’s team looked after us so well and speaking personally I had so much fun being together with my fellow dressmakers Judith, Corrie, Sara, Sue, Sarah, Di, Ruth, Jeanette and Kate (even though it was shorter than I would have wanted!) Many of the informal photos you see here are my own but some belong to one or more of my fellow models so I am indebted to them for their use here.

Kate on the left is wearing the Factory dress from Merchant & Mills in fabric from Sea Salt, Corrie is wearing the Camber Set top which she’s added a gathered skirt to and she’s used barkcloth fabric from Outback Wife. Judith is wearing a Mercury top from Marilla Walker (in Atelier Brunette Moondust) with True Bias Lander pants.
Sarah is wearing the Fiona sundress by Closet Case Patterns in orange cord from Ditto fabrics in Brighton. She’s wearing the Hampton jean jacket by Alina Design Company over the top in mustard denim from Goldhawk Road. Di is wearing Katherine Tilton for Butterick 5891 (not currently available) made using shirting from a factory sale and a self-drafted denim skirt. Jeanette is wearing the Reeta dress by Named Patterns in a vintage rayon.
So eventually the group shot turned out well!

The magazine arrives on subscribers doormats on February 16th and in the shops from February 21st. In the meantime, have you started your #so50Visible make yet…?

Zoom in

Incidentally, we received no payment for the article and the comments made in it were in response to questions we were asked. All views expressed in this post however are entirely my own.

Until next time,

Happy sewing

Sue

Sewing makes of 2018

I think this is a fairly comprehensive album of my makes in 2018, most of them have been worn a good number of times although not all were for me.

When I look back like this I realise what a busy sewing year 2018 was ( and a bit of knitting too!). Also, there seem to be a LOT of dresses and tops but very few skirts and trousers! I think this is definitely as a result of me gaining weight in the last two years and feeling self-conscious so, with the exception of my Megan Nielsen Ash jeans from autumn 2017, I really haven’t wanted to make close-fitting clothes.

I’m addressing this now, with some success so far, but the other truth is that I like wearing looser-fitting clothes anyway, although hopefully I can go down a size or two when I make them in future…time will tell.

Some of the garments you see here have been worn loads since I made them whilst others were less successful. Sometimes this was bad fabric choices, sometimes they didn’t suit me after all, also the weather became so hot that I didn’t wear the heavier items as much as I expected at the time.

I tend not to set myself up for ‘sewnine’ or other year-long initiatives because I’d rather see what takes my fancy as time passes, or whatever gap I feel needs filling. I’ve really enjoyed making a few jackets and coats this year and they have all had a good amount of wear, they aren’t something I’d done much previously. I’ll be making a couple of posh frocks soon because we’re going on a cruise in March which will need a few fancy threads in the evenings, I’ll be taking old favourites like the Maker’s Atelier Holiday Shirt and New Look 6351 trousers, and Papercut Moana to keep cool in during the day though.

Have you got sewing plans already for 2019 or are you more like me and just see what takes your fancy? We’ve got the new series of the Great British Sewing Bee to look forward to very soon and I’m sure that will inspire even more people to take up this brilliant activity with us! Dressmaking is an activity anyone can try fairly easily these days and there is so much inspiration, help and encouragement out there too, in a way it never was when I was first sewing.

I can’t wait to see the two blockbuster exhibitions at the V&A next year, Dior: Designer of Dreams opens in February and Mary Quant in April so there’s lots to look forward to there. It’s well worth considering membership this year I’d say, I’ve had excellent value-for-money from mine these past four years. [alternatively, Art Fund is also worth considering if you don’t live near London because that gives you reductions to lots of galleries and museums all over the UK, including the V&A)

I’m also looking forward to seeing a lot more SewOver50 activity from all over the world too, have you joined yet?

Maybe our paths will cross in 2019 and we can talk sewing together in real life?

Until then, happy sewing

Sue