A few hem finish suggestions-a Sew Over 50 topic

Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.

Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.

I’m beginning here with a faced hem…

This was the hem of the first Refashioners project I attempted. It was a jacket made from two pairs of my husband’s old jeans and because I wanted to use as much of the reclaimed fabric as possible I cut shaped facings for the lower edge. As you can see I also finished the edge with bias binding I made from offcuts of dress fabric.
The inside of the finished jacket looked like this. I understitched the lower edge of the facing to help it roll better and also slip-stitched it in various places including the seams and pocket bags to secure the facing without the stitching showing on the front.
This is also a much more shaped facing on the hem of Tilly and the Buttons Orla blouse. This can be a beautifully neat finish on a curve, it gives some ‘weight’ and crispness to the hem too and makes it less likely to curl upwards on blouses for example.
This Orla blouse was from 4 years ago, I like the exposed zip in the back too (the instructions for putting it in were excellent if I remember correctly)

The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.

Helpfully, my fabric had horizontal stripes, some opaque and some sheer so I started by placing the crin on the front of the fabric and lining it up with the bottom edge of an opaque stripe. It is stitched on very close to the edge being careful not to stretch the crin as I sew, it’s important it lies flat. By sewing the crin onto the right side of the fabric when you flip it to the inside the raw edge of your fabric is enclosed underneath. To be honest I was making up the method as I went along because my experience of this technique previously came from altering wedding dresses which used it so this isn’t foolproof. I would strongly advise you to try a few samples first so that you have the version which looks best for your particular garment. [the eagle eyed amongst you might notice in my photo that I’ve sewn the crin to the wrong side of the fabric! I obviously did it and photographed it before realising what I’d done. As this was four years ago I don’t have any other photo!]
Once the crin is turned up to the inside I slip-hemmed it by hand, it looks a bit messy on the inside because the black shows up but it’s absolutely fine on the right side.
the finished dress, it’s one of my favourites I’ve ever made, and it’s a partial-refashion too because the velvet bodice used to be a skirt!

If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.

The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.

Sew the binding on very close to the raw edge, this was a Simple Sew Lizzie dress
Here I made my own binding which is first sewn on with a 5mm seam allowance and then understitched which is what you see here. I made this Grainline Farrow dress for a magazine review
The hem is turned up and I’ve slipstitched it in place by hand.
This is the same technique with ready-made bias binding.
the finished skirt.
My final example is the little christening gown I made from a wedding dress.

If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.

This is one of my variations on the Camber Set
I roll-hemmed a straight strip of fabric here which I then pleated onto the sleeve using a fork!
I roll-hemmed a straight strip top and bottom and gathered it onto the sleeve here.
An extended length sleeve on the River pattern from Megan Nielsen, roll-hemmed and elasticated

I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.

Using strips of iron-on interfacing to stabilise the area where the cuffs fold up
This is felted-type woollen fabric where hand stitching is unlikely to show through but if you have a finer fabric I would make the interfacing strip wider so that I then caught the inter with my stitches and not the fabric itself. See the next photo to explain this better.
You can see the interfacing is above the hem line here and I’ve herringbone stitched it by hand. You can also see how I’ve created a chain link to anchor the lining to vent opening on the back of the skirt.
the hemming stitches aren’t visible from the outside using this technique.

For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.

If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.

Personally I always think the stitches show a bit too much no matter how hard I try to get them really tiny. It’s very easy to catch a bit too much fabric, or none at all! In truth I probably don’t practice enough!!
This Regatta dress from Alice & Co was an ideal application because the skirt has a straight, unshaped hem.

I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.

the binding is sewn on the inside first
the binding then flips to the outside to become visible.
This dress was made for the Simplicity pattern hacking challenge last year
Instead of the usual hem on this dress I created a casing which I threaded elastic through.

I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.

the hem from the inside
the finished hem from the outside.
the finished dress, I was off to a wedding!

The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.

Inside the hem the corners are mitred.

Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.

Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.

turn stitch and trim
make another narrow hem, stitch a second time on top of the first line. Press. There will only be one row of stitching visible on the outside.

If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.

attaching a band to the hem.
The finished dress (worn with walking shoes during lockdown!)

This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.

I put a piece of Stitch and Tear behind the fabric as I sewed.
It looked like this after I finished
It will look like this on the reverse.
gently pull away the backing and then carefully snip off the excess fabric up to the stitching line.
Eventually the hem looked like this, the sleeves are trimmed with Broderie Anglaise

I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…

I had some narrow strips of white cotton lawn lying around so I joined them to make a piece long enough to go around the whole hem.
I folded the strip lengthwise.
attach the strip to the hem, raw edges together.
I understitched it, plus there’s a band on the front which is what you can see folded over in order to enclose the facing eventually.
The band folds back to enclose the hem facing.
There’s a little bit of puckering on the reverse here but this is invisible from the front, a good press will sort that out.

To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.

Stitching the hem with the overlocked edge rolled to the inside.

This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.

the bias strips were applied right side to wrong side on the shorts hems.
the bias strip is on the inside at the moment
It is then turned up to the outside where I trimmed and stitched it with ricrac braid.

I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!

Until next time, Happy Sewing

Sue

#so50visible challenge 2020

It’s back! After the success of the first #so50visible challenge in 2019 we thought you might like to do it again, especially the thousands of you who have discovered @sewover50 since last year and who might have missed joining in.

In early 2019 we set you a challenge to find a pattern which featured an older model (at least 45+) and make it. If you thought this would be easy then you would have been mistaken, because once we had started looking more closely we realised that this was going to be much harder than it sounded.

Rather than me reinvent the wheel again here I suggest you take a read through the extensive post I wrote at the time, and its follow-up, so that you have some understanding of the challenge we set and how the whole idea came about. There is also a VERY extensive list of as many patterns as we could source at that time.

Since last year I’m cautiously optimistic that the situation seems to have improved somewhat. Sandy and Judith have been diligently saving in Highlights over on the Instagram account many of the new patterns that have been released in the the last twelve months which feature older models-male as well as female. Some of these patterns are by companies which have been consistently good at using a variety of models of all ages whilst for others this is a first toe in the water, which is great to see.

It seems that a lot more companies are actively using older women amongst their choice of models now (although a few still think we all want to wear the frumpier selection of what’s on offer-very wrong!) For the most part though, of the pattern companies who are choosing older models, they realise that we can be stylish, creative, outspoken individuals who do not have a shampoo and set once a week, don’t want to be stereotyped and who have money to spend on quality products.

I’ll list as many of the new patterns as I can but, if you’re tempted to join in with the challenge, I would strongly urge you to take a look at those I’ve already listed because each website will include that brand’s new patterns anyway.

Among the new ones we know of are, in no particular order:

Cashmerette-Washington dress and Rivermont Top and Dress

The Maker’s Atelier-there is wide range of patterns to pick from including several new designs Shawl Collar Dress, Shawl Collar Coat, Over-sized shirt dress, Blazer and Wrap Dress

Style Arc-Sheryl stretch or woven pants, among others.

That Wendy Ward-brand new book ‘Sewing Basics for Every Body’, the Kim jumpsuit and the Dylan Peacoat particularly

Helen’s Closet-Donovan skirt

Rebecca Page-slim-fit Cargo pants

The Sewing Revival-the Fantail Top and the Stitchbird dress are the most recent but all their adult patterns qualify

Wardrobe by Me-Men’s overshirt

Sew Liberated-Lichen Duster coat

Grainline Studio-Uniform Tunic

Pattern Union-Lulu top

Tilly and the Buttons-new Make it Simple book various styles

Thread Theory-Newcastle Cardigan

Tessuti-Tamiko pants and Berlin jacket

Naughty Bobbin-Sizzler sundress

Colette Patterns-Ariel dress

Sinclair Patterns-Jessica bodycon dress

Simplicity and Butterick have improved considerably since last year and we have been told that they are actively including more mature models in their catalogues now, let’s hope this is the case. There are now a reasonable number of patterns to choose from (too many to list here individually) so browse their website or catalogues to see if there’s something that appeals.

Tuesday Stitches-Citrus leggings, amongst others

Seamwork Magazine-Lucy jumpsuit, there are bound to be others

I’m going to leave it there because I’ll never quite know where the end of this list should be! I would urge you to look through pattern company websites, books and catalogues for your inspiration if you’re keen to participate. I would also add that there are quite a number of small pattern companies who are hugely supportive and involved in our community but they either don’t use older models, or they use illustrations, so we can’t include them for this challenge. That said, we are very appreciative of every repost, share and use of the #sewover50 hashtag that any pattern company gives to a SewOver50er, they are always welcome and it helps to keep our little, occasionally slightly wrinkled, faces in the public eye to prove that we’re still here, and have no intention of keeping quiet.

We’ve got prizes again too so thank you to our list of sponsors (so far) who are offering a selection of patterns, and Wendy Ward is offering a copy of her new book too. Winners will be chosen at random after the challenge closes. You’re welcome to share works-in-progress but only completed garments shared with a photo of the original pattern after the closing date will be eligible to win a prize.

Stay in touch with the Instagram account while the challenge is on because that’s where you will find any new information as it crops up. Make sure you use the new #so50visible20 hashtag although the original #so50visible is OK too. If a pattern company reposts your outfit (which obviously we really hope they will!) use the #so50thanks hashtag too. Keep an eye on their Stories feed too because sometimes they forget to tag us, or the tag doesn’t work for some reason.

The #so50visible20 challenge begins on March 1st and runs for the whole of the month so what are you waiting for? Share a photo of your garment along with the source pattern, have a look in saved highlights on the IG account for various ideas how to do this, it doesn’t have to be a brand new garment this year but it should be a new photo of it, not one you’ve shared before. You could even use a flatlay this time, particularly if you don’t like putting yourself in the frame. Have a look at #so50flatlay for ideas on this. There is no limit to the number of entries you can put in either.

We can’t wait to see how SewOver50ers rise to the challenge, the more we keep this in the public eye then the more chance we have of seeing older faces featuring on pattern covers, in magazines, in sewing books. And part of the worldwide fun of this challenge is seeing makes for the opposite seasons to the one we might be living in because, let’s remember, we’re a global account, and that’s a really big deal!

Until next time,

Sue

Are you ready for the first Sew Over 50 sewing challenge?

SewOver50 has been going strong on Instagram for nearly 6 months now, since Judith Staley set it up last August, and it seemed like it was time to consolidate its success by setting up a new challenge for dressmakers to join in with.

Judith and I, along with Sandy in Brisbane, have been working on ideas for a while and eventually we hit upon the notion of asking anyone who wanted to join in to choose a pattern which featured an older person modelling it in the advertising ie: on the packaging or accompanying artwork. This proved to be even more difficult than we had imagined because it only went to show just how few pattern companies feature older models, never mind women of colour or larger sizes! Unlike some recent publicity elsewhere we’re not intending to shame pattern companies who don’t include us as part of their demographic because it isn’t helpful, we want to highlight and commend those companies that already do, even if it’s to a very small degree, and hope to encourage those that don’t to follow suit. It does seem though that a few companies have been falling over themselves to apologise to people of colour who sew (POC) or those who fall outside the ‘normal’ size range for excluding them, whilst we as older sewers didn’t merit such an acknowledgement-perhaps they actually don’t want our custom? Are we being too polite? Whatever, onwards…

Let me set out the challenge to you (should you choose to accept it…) it is this…

To sew a garment either for yourself or someone else using a pattern which features an older person ie: over approximately 45-50, on the cover and/or in other original supporting marketing. This doesn’t include a company sharing of other people’s versions of their patterns on social media. The point is to highlight how few patterns we think there are like this and to encourage designers and pattern companies to think outside the box more and include over the age of 50 in their advertising because we’re such a large part of their buying public. We feel that there is no valid reason to side line this particular audience especially as we often have more disposable income to spend. 

  • The challenge can include any adult garment, for women or men, it can simple or advanced, outerwear or underwear, tops, bottoms, dresses. Only the garment which uses the older model in it’s artwork/advertising should be made, not any other garment by that company if it’s the usual situation.  
  • We have decided to include patterns which feature in books or magazines (probably from within the last 5 years or so) too because there may be more opportunities available there. 
  • If you feel strongly about using a genuine vintage pattern (as opposed to a modern take on vintage) which features an apparently older person then go ahead but it can be so hard to tell because everyone looked old back in the day, even teenagers!
  • Share what you’re up to as often as you like for the duration of the challenge, we all like to see what others are sewing and if you have a great pattern then let’s get it out there for all to see, someone else may want to choose it too! Make sure you follow the @SewOver50 account and use the hashtags #SewOver50 and #So50Visible so that we can all search for and see them too.
  • We’ve had several generous offers of patterns as ‘prizes’ from a few designers which will be randomly awarded at the end of the challenge. This isn’t really intended to be a competition, it’s more a sharing of ideas and inspiration and highlighting our presence.
  • In no particular order the ‘prizes’ are as follows-
  • The Maker’s Atelier-Holiday shirt and top. 
  • Seamwork- 1 of 3 PDF patterns
  • Paper Theory-Olya shirt
  • Alice & Co-pattern bundle.
  • You don’t have to make a brand new garment for the challenge but ideally it will be one you’ve made relatively recently (within a year, say) and haven’t already shared lots of times. Why not take a new photo of it though?
  • When you’re ready to enter then you must include a shot of the original pattern as well as your finished make. If you don’t know how to do multiple images or collages on Instagram then just include the pattern in the shot with you (or your chosen model) Judith will share regular posts and information and you have plenty of time.
  • Post your photos any time between February 1st and March 15th 2019 on the @SewOver50 account and make sure you include the hashtags so that we can see them.
  • The Challenge is open to EVERYONE regardless of your age, size, gender, ethnicity or orientation.

Once we started searching we realised that although there are MASSES of pattern companies now there were very, VERY few using older models [the slight exception seems to be for men’s patterns where an older man is deemed to ‘distinguished’ the same does not seem to apply to women] Judith and I trawled through The Fold Line’s huge database which was very helpful as it collates so many pattern companies but it was often extremely difficult to tell if the model was in the over 45-50 bracket or whether they just appeared that way! We decided to err on the side of caution so as not to cause offence but if you feel the model (or the illustration) is ‘older’ then go right ahead. 

There are doubtless more pattern companies existing in a small way where you are-SewOver50 has a global reach with followers all over the world-so if you know of a company, or are a pattern company, probably producing PDFs, then please highlight it on Instagram or message Judith directly and she’ll share it on the account. 

We’ve compiled a list for you to look through [it isn’t that long and it isn’t definitive by any means] so hopefully you’ll feel inspired and want to show some love to those companies which already acknowledge we exist!

Paper Theory-Olya pattern

Maker’s Atelier-several to choose from

Colette-several to choose from

The Thrifty Stitcher-Dawson Coatigan

Tessuti-various

Pattern Union-various

Sew Me Something-various

Simple Sew-Zoe dress and topAlice & Co-Intrepid Boiler Suit

Sew Over It-Coco jacket

Seamwork-various

Tuesday Stitches-various

Blue Dot patterns-most patterns, Diane does her own modelling

By Hand London-Orsola dress and skirt

Dg patterns-Patricia

Cashmerette-Washington dress

Pauline Alice-Romero trousers

Designer Stitch-various

The Sewing Workshop-various

Fresh Press-various

Sew This Pattern-various

Sinclair patterns-various

Wardrobe By Me-various

Merchant & Mills The Workbook Curlew dress only

Sew Different patterns-Cocoon jacket and possibly a couple of others

Elbe Textiles-groovy old guy, same old, same old with the women though

Simplicity #8607 #8163 absolutely dismal showing by the big companies!

Everyday Style by Lotta Jansdottir -this is a book

Wendy Ward-Beginner’s Guide to Sewing with Knits book

Any pattern created for a sewing or dressmaking magazine and which is modelled by an older person could also be deemed eligible.

As I’ve said in previous blog posts, I know full well that some smaller companies want to keep a tight rein on the image that they are projecting and I respect that completely. Sadly, as a wider community, we’re noticing that some of these companies don’t ever acknowledge any of us, via social media, who don’t fit into their ideal demographic. They are more than content to encourage us to ‘share your makes’ and ‘share the hashtag’ etc. so that they get lots of lovely free advertising from us but this is starting to get galling and I’m thinking of no longer naming, or indeed reviewing, any pattern by certain brands if they can’t be bothered to acknowledge the actual community that they rely on! #NoLikeNoMention

There are a quite number of other groups that are under represented in sewing community terms too so if you feel you are in one of those; people of colour who sew, curvaceous sewers and people with disabilities are just a few examples, please take it as read that you are absolutely invited to be a part of this too, the #SewInclusive hashtag would be pointless if it didn’t actually include anyone who wants to be involved.

We really hope that you’ll want to join in with this challenge, and that by doing so, as a community, we’ll encourage more pattern companies to choose carefully the models they use. Many of them must have stylish Mums or Aunties who would be up for a photo-shoot, or there are plenty of beautiful people right here in the sewing community who would volunteer I’m sure.

We’d love you to be a part of this challenge and help demonstrate that there are many of us who, whilst we’re a bit older, we still take a keen interest in fashion and great clothes, and we make stylish things which deserve to be seen and acknowledged by a greater section of the home dressmaking market. I want to stress that other than the pattern ‘prizes’ which have generously been donated this post is not sponsored, endorsed or affiliated by anyone and the @SewOver50 account isn’t either. We’re really looking forward to seeing what you all come up with so get searching, begin sewing and start sharing.

Happy Sewing,

Sue

Sewing makes of 2018

I think this is a fairly comprehensive album of my makes in 2018, most of them have been worn a good number of times although not all were for me.

When I look back like this I realise what a busy sewing year 2018 was ( and a bit of knitting too!). Also, there seem to be a LOT of dresses and tops but very few skirts and trousers! I think this is definitely as a result of me gaining weight in the last two years and feeling self-conscious so, with the exception of my Megan Nielsen Ash jeans from autumn 2017, I really haven’t wanted to make close-fitting clothes.

I’m addressing this now, with some success so far, but the other truth is that I like wearing looser-fitting clothes anyway, although hopefully I can go down a size or two when I make them in future…time will tell.

Some of the garments you see here have been worn loads since I made them whilst others were less successful. Sometimes this was bad fabric choices, sometimes they didn’t suit me after all, also the weather became so hot that I didn’t wear the heavier items as much as I expected at the time.

I tend not to set myself up for ‘sewnine’ or other year-long initiatives because I’d rather see what takes my fancy as time passes, or whatever gap I feel needs filling. I’ve really enjoyed making a few jackets and coats this year and they have all had a good amount of wear, they aren’t something I’d done much previously. I’ll be making a couple of posh frocks soon because we’re going on a cruise in March which will need a few fancy threads in the evenings, I’ll be taking old favourites like the Maker’s Atelier Holiday Shirt and New Look 6351 trousers, and Papercut Moana to keep cool in during the day though.

Have you got sewing plans already for 2019 or are you more like me and just see what takes your fancy? We’ve got the new series of the Great British Sewing Bee to look forward to very soon and I’m sure that will inspire even more people to take up this brilliant activity with us! Dressmaking is an activity anyone can try fairly easily these days and there is so much inspiration, help and encouragement out there too, in a way it never was when I was first sewing.

I can’t wait to see the two blockbuster exhibitions at the V&A next year, Dior: Designer of Dreams opens in February and Mary Quant in April so there’s lots to look forward to there. It’s well worth considering membership this year I’d say, I’ve had excellent value-for-money from mine these past four years. [alternatively, Art Fund is also worth considering if you don’t live near London because that gives you reductions to lots of galleries and museums all over the UK, including the V&A)

I’m also looking forward to seeing a lot more SewOver50 activity from all over the world too, have you joined yet?

Maybe our paths will cross in 2019 and we can talk sewing together in real life?

Until then, happy sewing

Sue

Indie patterns vs ‘the Big 4’-discuss

Well, I seem to have set the cat amongst the pigeons a little with my previous post reviewing Vogue 9251. In it I mentioned how I chose this particular pattern over a Sew Over It one. I didn’t say anything detrimental about their Eve dress, I simply chose the Vogue one.

When I posted on Instagram about the new blog I simply commented, “don’t dismiss ‘big 4’ patterns because Vogue have some fantastic designs which fit well and are often fashion-forward”. What I didn’t expect was the number and variety of responses which that provoked. I’d like to try and explore a little more some of those comments here.

When I first learned to dress-make at secondary school the only patterns generally available to me were the big brands, Butterick, Vogue, Simplicity etc. Burda were there too but they were much more challenging because very often you had to trace them off (I’ve never been a tracer, always a cutter-outer) and remember to add your seam allowances. They were frequently more fashion-forward but I think because they are a German brand their styles were ‘a bit weird’ and it wasn’t often to my taste at the time. Their printed patterns now include seam allowance but the magazine still has large sheets which you trace and add the SA to. The designs have improved somewhat too. Vogue patterns were always very much the ‘Rolls Royce’ of the pattern brands and it was always a big deal for me to spend so much money on one (even now I try to buy them when they are on a half price offer) They were often where innovative designs first appeared and then an adapted version would appear later on in Butterick or Simplicity instead. Now a Vogue pattern almost seems cheap compared to indies!

Another source of patterns were free ones provided by post by women’s magazines and newspapers, you’d save up printed vouchers which you posted off and they would then post the pattern back to you. A slow process but actually it didn’t matter much because we weren’t all about instant gratification back then, we were happy to wait because we were getting something for nothing! Some of these patterns were OK, some not so much.

IMG_7701
I found this one in my collection, it doesn’t have a date on it but it’s probably from about 1983-4

In the early 80’s Prima magazine started giving free patterns included with the magazine. They were the template type we still get today which came on two-sided sheets that you had to trace off and, as a result, they were quite simple designs but they were popular. I was attempting my own pattern cutting by this time before I went to college so these patterns were a springboard to getting me started.

Then dressmaking seemed to fall out of favour and the curriculum all seemed to change at school. There were always a few of us who kept it up, it was how I earned a modest living while my children were small but it became harder and harder to buy nice fabrics at reasonable prices, or haberdashery, and nobody seemed to think it was a worthwhile pastime.

Then, in 2013, the Great British Sewing Bee happened and everything changed. There was always the core of us that had carried on sewing but now a new group were being introduced to it as a hobby and as a means to make the sorts of clothes they wanted to wear. The big pattern companies were still there but for the women who hadn’t been taught dressmaking they were a bit daunting and also a little dull. [I know there are men who sew but, let’s face it, they are the tiny minority] The packaging looked a bit dated and the layout of the instruction sheets inside hasn’t changed in decades. This isn’t a bad thing for those of us who know what we’re doing but to the unfamiliar they can be very confusing and a bit scary. They generally always assume a good level of sewing knowledge before you start so beyond telling you the order of making they don’t always tell you the exact technique or method. The pattern books don’t help themselves because they can look uninspiring with strange fabric choices and not many up-to-date or trend-led styles, or by making it difficult to spot them amongst the dull ones!

I’m not aware there was any such thing as an ‘independent pattern maker’ before about 5 years ago, and if there was then they were well below the radar, but people like Tilly Walnes, who appeared on the first GBSB series and is Tilly & the Buttons, and Lisa Comfort of Sew Over It both started developing their own patterns and began marketing them. Tilly created wearable, simple modern shapes which were beautifully presented and the instructions came in the form of photographs rather than with illustrations. Sew Over It’s aesthetic is vintage-inspired with tea dresses and floaty skirts being more prevalent. Lisa seems to have diversified into a whole lifestyle-thing which I’m quite glad I’m no longer a young mum trying to emulate.

Fast-forward to today and we have masses of new ‘indie’ patterns flooding the market all the time. It seems that everyone who fancies themselves as a designer can have a go at it and create new patterns and clearly some will be considerably better than others. Initially I didn’t go down the indie route because they were usually in the region of £12-£15 or more for a printed pattern, and besides I have a monstrous collection of paper patterns which I’ve acquired over about 40 years! I wasn’t attracted to the new patterns because they were either too simplistic and I could make my own quite frankly, or they were vintage-style which I’m not that into.

I’ve noticed too since making a few indie brand patterns that with some of them if you don’t fit into a certain age or body type then you never get a ‘like’ or a mention if you tag the company in your IG feed. Frankly, if I, my makes and my photos don’t suit your design ideal or aesthetic then I won’t be bothering to tag in future, you need the customers more than they need you and no one likes to feel ignored.

So, where does that leave us today?

The big companies have carried on very largely unchanged for decades and you can usually be sure of a well-drafted product with good instructions (although if you are able to follow them is sometimes an entirely separate issue) The fit of some of these styles isn’t always so good but there’s always going to be some variation according to the style and I’m not saying they are always wrong or right. Let’s face it, we’re dealing with the human body here with all it’s quirks and variations as well as personal taste and style.

I wonder if the fact that, almost without exception, indie pattern styles have names rather than numbers which instantly makes them more memorable? Also, having now succumbed and bought a number of indie patterns I see there’s a wide variety in the form they take and their packaging is definitely part of the appeal. They come in nice packages and they might feature lovely sketches on the cover or fashion shoot-style photos, many come printed on heavy, quality paper and others are on ‘greaseproof’ type paper or even brown wrapping paper, each is trying be unique in what is becoming a crowded market. If you can get yourself in with The Fold Line and an attractive young blogger who will sing your praises then so much the better, guaranteed advertising.

I think that the single biggest difference that the indies have is the availability of downloadable PDFs. We’ve arrived at that very modern phenomenon ‘instant gratification’. You can purchase, download, print, cut, stick, cut out and sew all in one evening if that is what works for you. The PDF is generally a little cheaper [there are free ones too] so you can buy direct from a pattern maker who may live on the other side of the planet if you want to. It’s possible to get them printed at the local print shop too, or by online printers but I’m wondering if that doesn’t defeat the object of not buying a printed version if there is one in the first place? Indies often have a wealth of online tutorials and support which was never possible before. That said, never dismiss a good old text book-the Reader’s Digest Complete Guide to Sewing (first published in 1978 I think) is an absolute goldmine of information.

In the 4 years or so that I’ve been part of the ‘online’ sewing community I’ve noticed a trend amongst some dressmakers who only appear to use indie patterns and to sing their praises. Is this an inverted form of snobbery? I don’t know but that’s just fine if they are the styles you want make, of course it is, we’re a free country, but a lot of the new styles from some brands are starting to look incredibly ’samey’ and are bringing nothing new to the design table. If you want truly original new styles it seems to me that the Europeans are doing it better, such as Named, Deer and Doe or The Assembly Line.

Some indie patterns are so overly simplistic in the designs they offer that I do wonder why dressmakers are shelling out so much cash for the pattern when they don’t have to. Do they genuinely not realise that there are other, cheaper alternatives?

Don’t get me wrong, there are brands which produce well-drafted, original designs with clear instructions and the designer has worked very hard to put out an excellent quality product but none of the printed versions of these patterns are terribly cheap, many are £20 a pop now (and I’m not saying they shouldn’t be because of course there is a lot of time and effort involved) but, as I return to my original point, don’t dismiss the big companies out of hand because they do still have something to offer, relative cheapness for basics being one of them.

I was particularly saddened, and annoyed, to hear Heather-Lou of Closet Case Patterns say on the Stitchers Brew podcast recently that she thought “you don’t need to take a pattern cutting class” because there are “very few things in life you need to go to school for”. Well thanks a bunch!! I’m so glad that myself and thousands like me took the time to go college to follow our dream and learn how to be pattern cutters because it was obviously a big old waste of time as anyone can do it! In the next breath she says that she now has a professional do her pattern drafting because “she (the pattern cutter) went to school and trained to do it” WTF! I’d enjoyed listening to what she had to say up until that point but that’s plain insensitive and insulting. I know there are some brands, like Maven patterns and The Maker’s Atelier, which have been created by women with years of experience and expertise in the fashion industry but there are other’s who don’t have that.

I could wang on for ages about the benefits and downsides of both types of pattern and in all honesty they will coexist side by side from now on. The big companies have certainly got to stay on their toes and possibly find new and engaging ways to present themselves to be appealing to the burgeoning younger market, but I hate to see newer dressmakers parting with lots of cash for some patterns which are really just a new version of the wheel, the spokes or the tyre may be different but it’s still a wheel none the less.

Part of what we all love about dressmaking is making original, creative clothes that fit and supporting one another in our endeavours, long may that continue. It’s just that we are the customer and always have a choice where we spend our hard-earned money.

All views expressed are my own of course and I dare say many of you won’t agree with me but I know from comments on my IG post that I’m echoing thoughts of others too. I’m not sponsored by any of the brands I’ve mentioned either! I’d be really interested to know what you think about the whole subject too so do please leave a comment.

Happy Sewing

Sue

 

 

 

 

Vogue 9251 wrap-over dress

 

IMG_7668

Wedding outfits are always a dilemma and sewing your own is no exception to this! When my elder daughter’s best friend made the happy announcement she was getting married in the summer I started planning (in my head) straight away!

As I mentioned in my previous Simple Sew blog, by about May it was going to be the Lizzie pattern in a particular fabric but then the supplier was no longer going to provide us with said fabric so it was back to the drawing board.

I made a trip to Goldhawk Road in London in early June and Classic Textiles came up trumps with a silky crepe de chine in several lovely botanical prints which necessitated a game of eeny, meeny, miny, mo to choose between them (very scientific!) I settled on a silvery grey background with a variety of flowers on and I bought some very soft slipper satin lining to go under it.IMG_7148

I didn’t want to use the Lizzie after all because it would break up the design into too many pieces so I opted, after quite a bit of research using The Foldline’s pattern database, on Vogue 9251. I chose it over the Eve from Sew Over It because I liked the front and back darts on the bodice instead of gathering and I preferred the flutter sleeves too-I couldn’t quite work out on the SOI one whether the sleeves dipped oddly at the back or not. Anyway, I didn’t want to do it just because everyone else was and Vogue have always been extremely good patterns. By using a very simple wrap over style it would show off the print nicely, not all ‘chopped up’. It has a full-length version too with simple short sleeves.

I chose to make a test version in stash fabric first just to be sure about fit and whether the style suited me. It’s a Vogue “Easy” pattern and it’s very straight forward-cutting out the toile wasn’t too tricky but I did have to spend a long time cutting the crepe de Chine later because it’s soooo slippery and having a one way design meant I wanted to get the flowers matching horizontally on each piece as much as possible. I wouldn’t advise a total novice using this fabric, I had a lot of fun and games with it and I’ve sewn forever!

I chose the size according to my measurements increasing slightly at the waist and I’m really happy with the fit. Obviously a wrap-over is pretty forgiving size-wise but you don’t want it much too big because it will be all gapey at the front which is never flattering. IMG_7169IMG_7162IMG_7161IMG_7159

IMG_7164
Help was at hand as you see!

There’s a lot of hemming to do around the skirt and flutter sleeves so I used my new rolled hem foot for my Pfaff but I really struggled with it. I just couldn’t seem to get the knack of it. I persevered and it’s just about acceptable if you don’t look too closely, I don’t know if it was too much of a curve or not enough but I must practice more! I just wasn’t happy with it on the crepe de Chine so in the end I reverted to making a pin-hem which was long winded and still not as good as I’d like but there’s an element of me being uber-critical as time was running out. [I did a test of the rolled hem finish on my overlocker too but decided it wasn’t smart enough on this particular fabric] As I’ve mentioned, cutting out the slippery fabric probably meant it had shifted a bit on the table in the process-it’s always going to be difficult if you have to use your dining table and not one specifically for the purpose.

You might find the side seams droop down a little so if this bothers you, and you’re not up against the clock like I was, then leave the dress to hang for a day or two and then level the bottom off before hemming it. You could do this on your dress stand (dummy) if you have one, or measure consistently from the waist down using a tape measure.

The pattern calls for the neck edge to be finished with bias-binding, which is what I did on the first version although I made my own from the fabric rather than buy ready made. The crepe de chine is very thin and quite sheer so I’d bought slipper satin to line it with. I cut the bodice exactly the same and bagged it out, then under-stitched the edge-take great care not to stretch this edge because it will go baggy, stay stitch the edge first or use iron-on tape if the fabric is sturdy enough. The skirt was the same except much shorter, about knee length as you can see in the photo. IMG_7659

IMG_7661
This is the finished dress turned inside out so that you can see how I lined it.

IMG_7429

IMG_7660
For extra security I used a clear press stud at the wrap-over point and made lingerie straps on the shoulders too, using narrow ribbon and press studs.

IMG_7662
So that the lining didn’t flap about and show I slip-stitched the edge of it to the top layer some of the way down.

IMG_7439IMG_7437

IMG_7432
All ready for the off! I got the hat less than a week before the wedding (half price in John Lewis) the shoes and bag I already had.

After all the boiling hot weather we’ve had in the UK over the last few weeks it changed and was a bit cooler and really blustery on the day of the wedding. I was a bit concerned that I’d lose my hat and my skirt would blow up around my neck but that didn’t happen thankfully! A hat pin helps!

I really like this pattern, it’s really comfortable to wear and the wrap-over covers well although a press stud always helps. I think I’ll make more of this style as it’s a fairly quick make and is quite beginner friendly if you don’t use a super-slippy fabric like I did, just something with a bit of drape. The sleeve shape is very pretty, and did I mention it has pockets?

Don’t overlook the ‘big four’ pattern companies when you’re choosing a pattern because Vogue in particular have always offered fashion-forward styles, often by top designers, and you don’t necessarily need to be a very experienced sewer to get a good result. [Even better if they’re on a half-price offer!]

Happy Sewing,

Sue