Beautiful People: a new show at the Fashion and Textiles Museum, London

I haven’t shared a museum or gallery visit with you in such a long time (for sadly obvious reasons) but, at last, I’ve been to one that is probably worthwhile to write about because you may have time to visit it for yourself if you’re within reach of London!

Beautiful People: the boutique in 1960’s counterculture’ is the latest exhibition to open at the Fashion and Textiles Museum in Bermondsey, London. I went a few days after it opened and there was a lovely ‘buzz’ to it because a good number of people were there (but not too crowded by any means) and a great backing track of familiar Sixties music to accompany it.

The map at the start shows the locations in and around London of all the boutiques featured in the show, some of them were remarkably short-lived whilst others opened more than one branch, at least for a time.

Boutiques were an entirely new concept at the start of the Sixties, before then young people were pretty much obliged to dress exactly like their parents and shopping for clothes, if you didn’t sew your own, was a very dull affair in traditional gents outfitters or snooty ladies dress shops. All of that began to change when Mary Quant opened Bazaar, her first London boutique and many others soon began to follow suit (pardon the pun!) Clothes shopping became a fun and sociable activity, trendy boutiques with exciting interiors, pumping music tracks and fast-changing, attractive merchandise became more commonplace.

Both young women and men started to break away from the constraints of very formal fashions prior to the early Sixties and young men in particular embraced much less starchy ‘masculine’ designs with many bright colours and shapes and new fabrics coming into their wardrobes. Women of course were already embracing miniskirts with wild enthusiasm.

Beatle George Harrison wearing a formal tailored jacket made using William Morris’ Golden Lilies fabric.
Jimi Hendrix lived in London for 9 months 1968-69 and fully embraced the vibrant lifestyle, including clothes like this ruffled crepe-de-chine shirt. (I can recommend a visit to the Handel Hendrix Museum in Mayfair if you have half a day to spare in London)
The use of floral designs on men’s clothing from the mid sixties onwards demonstrates how gender-fluid fashions were becoming over this period. The shirts were often reminiscent in style of Eighteenth century shirts worn by men with ruffles and frills but such exuberant prints were a new departure.
In 1966 a young Mick Jagger bought an authentic late nineteenth century Grenadier Guardsman’s jacket for approximately £4 from a King’s Road boutique to wear on TV music show Ready Steady Go. After his appearance, the shop promptly sold out of everything they had in stock!
The club UFO was a favourite amongst the hip young ‘set’ and their artwork shows a mixture of Art Nouveau influences and psychedelia.
The print on this shirt is typical of the new designs gaining popularity, this features a montage of images taken from Nineteenth century fairground and circus posters.

Moving on through to the main part of the exhibition, it is set out with examples of garments from a number of the boutiques which were most notable during the Sixties. Often they are in high-cost areas of London such as Chelsea or Knightsbridge, and were owned and run (with varying degrees of financial competence and success) by the wealthy offspring of British landed gentry. The information notes made me laugh because they describe how dark, noisy and shambolic a lot of these shops were, with stock all over the place, inconsistent supply and poor quality of the stock, they weren’t intended to be welcoming if you were the ‘wrong sort’ of shopper! Some were barely shops at all, just a space to hang out with your friends that had a few clothes draped around it (like a teenager’s bedroom…) If Daddy was underwriting the venture it didn’t much matter how successful it was!!

Granny Takes a Trip was one of the best known of these boutiques and traded for a good length of time compared to most. Eventually, during the Seventies, Malcolm McClaren and Vivienne Westwood took over the premises and it went through a number of incarnations before becoming her flagship World’s End store.
Hung on You, dapper suits for men
Androgynous men’s wear at Mr Fish
The Beatles even got involved with their Apple boutique.
Of course Biba is the name most synonymous with Sixties boutiques, I overheard several show visitors reminiscing about shopping there and it sounds like a chaotic experience…I can’t stand shopping in Primark because of all the mess, Biba sounds like a Stygian nightmare!
Quorum was another popular hangout
Many of the clothes were not especially well constructed or made using good quality fabrics. They were experimental with new textile developments embracing the likes of Nylon, Lurex, Crimplene and the now-derided Polyester. Of course, at the time, these were terrifically exciting new innovations so it’s easy for us to be sniffy about them now but it released millions from the drudgery of labour-intensive laundry or buying expensive-but-dull clothes which had to last.
Biba and Quorum displays

Moving upstairs there are even more examples of the fashions from the decade, it was interesting to see the more fluid shapes here with possibly 1930s and 40s influences, certainly different from Mary Quant’s simple colour-blocked shapes at the same time.

Men’s tailoring, including green panne velvet.
There’s more than a hint of Glam Rock creeping into these outfits with Lurex and lame a-plenty.
The zigzag design on this dress pre-dated Bowie using it as a part of his Ziggy Stardust persona.
From the late Sixties into the early 1970s many Boho, patchwork, ‘ethnic’ and ‘gypsy’ styles enjoyed huge popularity. They were often pieced together scraps of Indian cottons and silks, this in an era when sustainability had little to do with everyday life and protection of the planet was seen by many as the preserve of slightly cranky individuals…
The Fashion and Textiles Museum was originally the brainchild of legendary British designer Zandra Rhodes so it is only fitting that there are few examples of her own work upstairs to finish.
There are also dresses by other iconic designers of the era including Bill Gibb, and Ossie Clark and his wife, textile designer Celia Birtwell. These designer outfits are much higher quality than many in the show, they are beautifully made using gorgeous fabrics with exquisite details and my photos can’t do them justice.

To sum up, this is a show that any generation can enjoy because there are so many great clothes on show. I’m not old enough to remember much of the Sixties but that didn’t matter-I enjoyed overhearing some of the women chatting who clearly were there though! The show is on now until March 13th, booking is recommended although I didn’t and took a chance on the day. FTM is a small independent museum and I always enjoy a visit there, White Cube art gallery is a few minutes walk further down the road plus there is a glass blowing studio nearby which is open to watch the artisans at work so there’s much to enjoy in the area. It’s so close to the river too which is a bonus.

How’s this for an iconic view of London? You’re welcome!

It’s wonderful that museums and galleries are now reopening and they need our support if we can offer it as we emerge from the pandemic. The ones I’ve visited so far have felt safe and not too crowded, numbers are limited and booking is definitely advisable if you’re making a special trip, and the opening days may be more limited too so check their websites.

Thanks for reading, until next time,

Sue

Summing up the Sew Over 50 sustainable sewing challenge.

I’ve been an absolute fraud when it’s come to writing any Sew Over 50 blogs for ages and ages which I feel very guilty about. I’ll hold my hands up and say that the community has been an absolute lifeline during the last awful 18 months that we’ve all been going through-the support, friendship, inspiration, encouragement and camaraderie that I’ve found through the account has been personally so important but my writing and blogging has really tailed off along with my mood in general. Judith and Sandy do an absolutely awe-inspiring job of running the account for us, along with fantastic guest editors to keep us all coming back time after time-thank you thank you THANK YOU!!! The sheer variety of topics covered has been incredible but I thought I’d dip my toe back into the @SewOver50 blogging waters by writing a round-up of the August 2021 challenge #So50SustainableSewing

If you follow Judith’s personal account @judithrosalind you’ll already know she has been increasingly sewing in a more mindful and sustainable way for some time now and has wanted to launch a challenge on the account so that we can all join in with this in some way.

We all know that ’the most sustainable garment is the one already in our wardrobe’ and that is true but it doesn’t allow for the important creative outlets that our sewing and garment making gives us. So, if we are to continue sewing for ourselves or others, how can we approach it?

Judith’s idea for the challenge is a simple one-we use only fabric which is already ‘in the system’, especially if it’s already sitting on our shelves. In other words, we source it in a variety of inventive ways and these fabrics could include… 

  • remnants or scraps
  • charity or thrift shop finds-fabrics or garments
  • vintage textiles
  • textile manufacturing waste
  • fabric swaps in person or online
  • de-stashes
  • discarded garments, table cloths, bed linen, curtains etc 

This isn’t a definitive list of course and over the whole month of August several guest editors shared their brilliant insights to inspire us. 

The month kicked off with Judith making a guest appearance on the Sew Organised Style podcast chatting with Maria Theoharous about her idea and lots of ways for us to get involved. Maria always has Sew Over 50 Thursdays too which feature guests from our community who share their sewing stories, techniques and inspiration so it is definitely worth having a listen while you’re sewing, or walking the dog!.

Throughout August there was a great line-up of guest editors including Jen Hogg @jenerates who is so overflowing with ideas that she had 4 separate posts! Her first post encouraged us to ‘shop our stash’ if you have one…I know I do! Like her, some of my fabrics are relatively recent purchases, occasionally on impulse although not always by any means, whilst others are fabrics I’ve acquired over a long period of time and from various different sources. Jen sees it as part of her creative process, to have the choice amongst her stash, to inspire her ideas for making. Jen is a multi-talented woman who not only sews but knits, embroiders, makes jewellery, works leather….in the UK you are probably familiar with her from being a contestant on the Great British Sewing Bee, plus you can also listen to her chatting on Sew Organised Style too! 

Some of the guest editors including Jen Hogg, Sue Stoney, Irene Lundell and Tricia Morris

Next was Sue Stoney @suestoney in Australia who shared her love of collecting all sorts of vintage items for later use including beautiful table linen and haberdashery. Many of us probably have buttons, zips, hooks and eyes, threads, elastic (doesn’t last indefinitely though so check it hasn’t perished before you sew it into something you don’t want to fall down around your ankles!) which came to us via our mothers, grandmothers, aunts, neighbours etc etc. I know I love to rummage amongst the hundreds of buttons I have to something special and individual, and I can’t recall the last time I actually bought hooks and eyes or press studs!

just a few of Sue Stoney’s treasured vintage haberdashery finds

Whilst the challenge is intended to encourage us to get creative and inventive for the pleasure of it alone there were also prizes to be awarded so the post on August 8th shared the generous sponsors for these. They included @criswoodsews whose zero-waste Parasol dress pattern has proved extremely popular especially during this challenge. @lizhaywood3754 is also an advocate for zero-waste sewing and has published two books on the topic. @thatwendyward has a recently published book on sewing more sustainably (she chats with Maria about it on the podcast too!) Wendy has long been mindful on the topic after years of working in the RTW industry, as well as producing her own patterns, teaching and writing several other sewing books all of which feature older models! There were also prizes from small businesses @greyfriarsandgrace who create paper patterns which guide the user to sew clothes using recycled textiles, and @craftandthrift who sell thrifted fabrics and kits. 

Jen returned with her second post sharing her use of ‘found’ fabrics, including a beautiful blouse made from a sheer vintage embroidered table cloth. Found fabrics can make you a lot more creative because you feel less constrained by what to make with them, do you find the cost of brand new fabric can stifle your creative instincts because of the fear of making costly errors? 

this blouse using a sheer vintage embroidered table cloth is so pretty

One garment that offered massive chances to use up multiple fabrics was the ubiquitous tiered and ruffled dress-a buffet dress in current parlance! Followers have certainly embraced this style and the account shared just a small selection of them on August 11th.

Robyn @robbynu42 was one of many to create some fabulous tiered and ruffled dresses using repurposed fabrics.

Next up was Marcia @MarciaLoisRiddington who adores #GrannyChic and is a wonderful exponent of using vintage fabrics to great advantage and her combinations of colours and patterns is absolutely masterful (mistressful?) 

Marcia is always so colourful, her combinations of vintage textiles are so original and fun.

Then @irenelundell from Sweden urged us to think about ‘circular’ sewing, buy from charity or thrift shops when you see it because not only does it support a good cause but it gives the textile or garment the chance of a new or extended life. 

Irene wearing her thrifted and dyed with iron and tea denim jacket! It has rusty nail marks to add to it’s charm

Tricia @morrissews who followed is a fine exponent of refashion, remake, remodel, recycle and repair…and try as much as possible to not replace. She shared her @Elbe_textiles (another prize sponsor) Sorrento bucket hat which couldn’t be more suitable for using up lots of small fabric scraps to make something really useful and wearable. 

Tricia wearing her denim scraps Sorrento bucket hat by Elbe

Jen’s third post demonstrated the times she’s used multiple garments to make a single new one, such as the three shirt shirt! Casual jackets which are made up of small pattern pieces are also ideal for a patchwork approach, there are even small businesses now making these commercially and every garment is different, some even manage to use 100% recycled components. 

Jen’s 3 shirt shirt!

She talks too about the 90 minute transformation challenge on GBSB was actually a very liberating experience because there was no time to be overly precious with what they were given to use, it forced her to think outside the box very quickly and not have time for self-doubt.

There was another Jen up next, @jenlegg_teescreatives who told us how she has used textiles belonging to dear and much-missed friend and how, when she wears the jacket she’s sewn, it feels like a hug from her friend Emma. There are many other ways you can honour or remember a friend or loved one in this way too by sewing articles like soft toys, cushions, patchwork quilts or rugs for example using garments that once belonged to them. 

Jen Legg wearing an absolutely beautiful jacket with a really touching story behind it.

Jen Hogg made her final return to tell us about using factory surplus in her making. She’s fortunate to live near a number of textile mills in Scotland and has been working closely with them to find inventive ways of using their ‘waste’ products. By using cashmere off-cuts, including something called ‘slitter’ which is a by-product of making cashmere scarves, so far Jen has knitted or crocheted rugs and blankets, and woven and stitched the strips together to make whole pieces of textile big enough to make into jackets, dresses or coats. Are there any textiles manufacturers or processors near you? Do they sell off any of their excess or by-products? It might be worth investigating. Another way of using up scraps which has been around for many many years is rag rugging (also known as proggy rugging) and @raggedlife has loads of ideas for this technique.

Jen’s beautiful jacket made with cashmere ‘slitter’ tape, all carefully pieced to make usable sized pieces big enough to sew into a garment.

As the month was drawing to a close Raquel in Taipei @raquel_sewing_knitting_in_asia (who is an absolute Queen of refashioning!) showed us how she takes inspiration from high-end fashion and clothing all around her but then recreated the looks using multiple end-of-line garments and thrifted clothes. Not only that, she would wear them a few times but if they aren’t quite right she isn’t afraid to take them apart again and reconfigure them into a new garment more to her liking! Sometimes more than once! I’m always too precious with things I’ve made to do that even if I don’t much like the end result, instead they tend to sit on the naughty step while I sulk about what went wrong with them, I should just tackle it head on and take up that unpicker! 

Raquel in one of her remade remakes!

The final guest editor for the sewing sustainably month was Judy @judywillimentross whose speciality is refashioning mens suits into another wearable garment. She buys them in charity shops but one of her own rules is not a purchase a suit which might still be of use to someone less fortunate and not in a position to buy new. [This could also be something to be mindful of when purchasing any very inexpensive garment, should we consider whether it would be of use to another person as it is before we buy it to cut up. Or do we take the view that the money we pay for it is a donation to a charity in need of the cash, especially if it’s going to end up in landfill otherwise?] Judy carefully uses ever-smaller fabric scraps to piece together into patchwork. 

Judy in one of her carefully pieced garments using men’s suit fabrics

So there you have it, loads of creativity to inspire us with our sewing projects in the future. By the time you read this the randomly-chosen winners of prizes will have been announced but the hashtag #so50SustainableSewing will continue to be used so the ideas bank will be constantly refreshed. 

I’ve added links throughout so you should be able to see and read for yourselves what the guest editors had to say. 

Judith and Sandy constantly add to the saved Highlights on the account too, particularly any one of the many worldwide challenges you might like to participate in, plus using some the dozens of hashtags unique to us will give you unlimited ideas for your own future projects.

I created this collage of a few of my projects made using thrifted, salvaged, reused, donated or repurposed fabrics at the start of August but I never posted it.

For this post I’ve concentrated entirely on the sustainable sewing challenge and so I’ve not added many thoughts of my own. In truth, I wasn’t in the headspace to participate while it was going on but it did cause me to think about some of the projects I’ve completed in recent years which went some way to being ‘sustainable’.There are so many ways we can all do a little, or a lot, to contribute to reducing the problem of waste and over-consumption. We should be mindful that whatever is right and possible for one person though is not necessarily going to be achievable for another. For example, many of us can practice visible mending because we like that it gives longevity to a garment and can look attractive, but others will see it as a reminder of hard times or embarrassment. Our community is nothing if not supportive so we need to be mindful of others at times.

Until next time, 

Happy sewing 

Sue

Tips for sewing with linen jersey, a new Lamazi post

Did you know that linen jersey was even a thing? It’s an unusual fabric which you don’t see often, we all know knits are available in most other fibre types-cotton, wool, silk or man-mades for example- but I’ve never worked with it before so when Liana invited me to sew my next Lamazi project using it, and to pass on any hints and tips for sewing it, I was up for the challenge. 

This 100% linen jersey comes from Mind the Maker in a range of colours and I picked the Dry Mustard shade which is a lovely vibrant ochre. The fabric has a beautiful lustrous sheen on the right side, the reverse is duller so it makes it much easier to tell the difference between the two. It has lovely light drapey quality too and is slightly sheer.

Linen fabric is not a textile known for its inherent stretch qualities and this jersey does feel slightly different from other knits because it has only a small amount of stretch along its length and quite a lot of stretch across the width but it has very little recovery so once it’s been stretched out it will stay like that at least until it’s washed again. During construction the application of plenty of steam will encourage some of this accidental stretching to be eased back into position so, coupled with its sheerness, this means that you need to think carefully about what garment to sew with it. 

Plenty of steam will help remove most unwanted bagginess like this

The properties of linen fabric itself [cool in warm weather, warm in cold weather] mean that it would be ideal for loose-fitting leisure or exercise wear, for yoga or Pilates for example. I would definitely say it’s better to avoid anything that is particularly close fitting because areas like the elbows or wrists would become stretched or baggy with little recovery. However the fabric has a lovely drape and its fine gauge allows it to be gathered up successfully so these properties could be exploited instead.

Bearing all these factors in mind I decided to make (another) Sewing Revival Heron dress which I would hack into a blouse. The pattern has a neckline which is gathered using elastic along with raglan sleeves with deep elasticated cuffs. To mix it up further I decided to pull the hemline in onto elastic rather than have a wide smock silhouette.

First things first, I washed the fabric by hand to remove any risk of excessive shrinkage or twisting in the machine. If you want to wash it in the machine then it might be an idea to overlock the cut ends together first to form a long loop and place it into a large washing bag to protect it further. Alternatively you could press it on your ironing board with plenty of steam instead. If at all possible it is better to dry the fabric flat, and certainly don’t wring or twist it. All of this might sound off-putting, and it is clearly not as straightforward as chucking a nice stable cotton into the machine but this is a luxurious fabric and deserves to be treated and handled carefully in the preparation. When it comes to cutting out your pattern pieces lay the fabric as flat as possible, handle it gently and don’t pull it about too much, especially if you decide to fold it. I made a whole back pattern piece for my top so that I could cut it flat, another appeal of the Heron pattern for me is that it has just three pieces so it’s a relatively quick sew usually. 

After cutting all the pieces the first thing I did was stabilise all the raglan shoulder seams using some iron-on seam tape, I did this to prevent any unwanted stretching before I sewed the sleeves in later on. I added small squares of iron-on interfacing to reinforce the bottom of the opening on the centre front seam too. I also decided to press all the folded parts of the casings/ruffles for the neckline, sleeves and hem before sewing anything together, just so that I was handling the cut-out pieces as little as possible, again to prevent unwanted stretching before they got joined together. I also tacked these folded parts into position temporarily. All this might sound excessive but I wasn’t in a rush, and I found the slow and considered processes very soothing at quite a difficult time. 

iron-on stay tape to prevent unwanted stretching of the raglan seams
I pressed and tacked casing/ruffles before joining the sections together later on
reinforcing the bottom of the neck opening with small squares of iron-on interfacing.

Something else I did before commencing was check on fabric scraps which needle and stitch-type would give me the best results. A ballpoint needle suitable for stretch/knits/jersey is essential to prevent snagging which could lead to laddering of this delicate fabric, and I found a short straight stitch was better than a narrow zigzag but you must do what works best on your own machine. You could sew a garment together entirely on an overlocker but be aware of the lack of rebound this fabric has so if it gets stretched or misshapen while it’s being sewn then it’s probably like that permanently. I also tested the overlocker finish before diving in for the same reasons. If you don’t have an overlocker this fabric is fine enough that where possible you could probably sew self-neatening French seams, or a wide zigzag might work but just be careful it doesn’t chew up the edges. If you have an overlock stitch option on your sewing machine and/or a special foot to sew an overlock-style stitch then definitely use them. Test all options before making your choice, the time taken could save you upsets later on. I slipped some folded strips of paper underneath the seam allowances when I pressed them to minimise any chance of the seam showing through on the front

testing stitches and overlocking
I popped two strips of folded paper under the centre front seam while I pressed it so that there was no show-through or unwanted shininess on the right side.

If you have a walking foot for your machine this is definitely a fabric worth using it for, even if you don’t it’s a good idea to use plenty of pins. I’m not a fan of mini-clips because I think they are too heavy and get in the way, this fabric is lightweight and I think mini-clips could distort it while you’re sewing but it’s up to you. Tacking seams is always an option too of course, any technique that prevents the fabric shifting while you sew basically.

If you’ve followed my blog for a while you’ll know I’ve made a few Herons before so the construction was straightforward, the only area I did differently was to create the ruffled hem with a wide elastic casing. I couldn’t decide between my planned 2cms or 1cm wide elastic initially so I tested with the two widths to see which I preferred-I chose to stay with the 2cms width as planned. 

testing which elastic width I preferred for the hem, this was the narrow one (the fabric scrap is wrong side out!)
and this is wider width, it’s the one I used at the hem in the end.
using a bodkin to insert the narrow elastic in the neck casing.
checking the gathered neckline on the stand
I used this quilting attachment on my machine so that I sewed an accurate parallel width for the elastic casing
close up of the elasticated hem casing

To sum up, I’m really pleased with how my first experience of sewing with linen jersey has gone, I’ll admit I was a little nervous because Liana was putting her trust in me with an expensive fabric but taking the time to plan and test, and use my existing knowledge of working with knits definitely helped. Because of the sheerness of the fabric Lamazi also provided me with a metre of Atelier Brunette crepe viscose in Ochre to make a camisole to wear underneath, I used the Simone camisole and trousers pattern by Maven which is a very quick make and a very useful garment to wear on its own or underneath other garments. The crepe viscose is a beautiful quality fabric with lovely handle and drape but be aware that there’s a disappointing amount of creasing, you might want to take that into account when planning, for example if you’re making something you’ll spend a lot of time sitting in.

all finished

As always, I hope you find my hints and tips helpful if you choose this lovely fabric, I wouldn’t recommend it to a novice sewer because some experience of sewing with other similar fabrics is definitely an advantage, plus it would be shame to end up with a costly mistake, but if you’re looking for a new challenge to add to your repertoire this could be a good start. I’ll launder the finished garment either by hand or in a wash bag on a gentle cycle in the machine. I’ll dry it flat too and store it that way, I don’t want a coat hanger to make it misshapen. If you’re a person who prefers not to worry too much about their clothes or their maintenance then this might strike you as overkill, and that’s fair enough, but I don’t think it hurts to have a few special things in our wardrobes which were worth the effort to make for ourselves. 

I’m looking forward to wearing this top as autumn is fast approaching (did summer ever arrive!?) thank you to Lamazi for providing me with the fabric to review.

Until next time, happy sewing,

Sue

A return to blogging with a Kingfisher top from The Sewing Revival

There’s been quite a lull in my sewing and blogging of late due to a distinct lack of motivation and generally feeling meh about everything. I don’t know about you but I’m utterly cheesed off with the persistence of the ‘Rona and, whilst I really try to find the positives as much as I can, there comes a time when I’m all out of good thoughts.

Anyhoo, I’ve finally managed to get my act together and to cut out and sew something which is worth blogging about!

You’ll know I use The Sewing Revival patterns a lot, and especially because they are SewOver50-friendly in their representation. Janine kindly offered me a copy of the new and improved Kingfisher top recently so here are my thoughts on it. The original version was one of the first in the Sewing Revival collection and it now features extra variations including 3 sleeve lengths and additional ruffles and frills to gussy it up.

Initially I’d settled on using a length of fabric I bought recently but in the end, whilst searching-sorry-shopping, my stash I came across a length of batik-printed lightweight cotton which had originally been a dress. I bought it as a remnant which was in two different-sized pieces pieces so I joined them right across the weft to make it useable. From that I turned it into a simple ‘pillowcase’ dress with a gathered drawstring top and hemmed at the bottom. Needless to say, this being England, I didn’t get a massive amount of wear from it because our climate is so unreliable. Sadly I don’t seem to have a photo of it now so you’ll just have to believe me.

The Kingfisher has raglan sleeves which are always so nice to make because they are simple and quick to construct. One of The Sewing Revival’s trademarks is to mix a stretch neck band, cuffs or hem with a woven fabric and this top features a ribbed, rounded neck band. But first I had to get all the pieces out of a length of fabric with a join across it at about 50cms in, plus a tear at right angles to the selvedge in another place AND a small hole just near that! I calculated that I could get a pair of 3/4 length sleeves but one would have to have the seam running horizontally across it. Another new feature of the Kingfisher is additional small ruffles to add so, instead of placing them vertically on the sleeves, I opted to cover the seam with horizontal ruffles, that way way both sleeves would look the same. After a bit of pattern Tetris I got everything I needed out including the ruffles. I started by making the sleeves.

Inside the sleeve with the exisiting join running horizontally

Because of the limitations of the fabric the ruffles were only 5cms wide so, in order to lose as little of their width as possible, I finished each edge with a rolled-hem finish on the overlocker. Check your instruction booklet because I’m sure many models will offer this feature, it will involve a few simple adjustments to the settings to achieve. A rolled hem is a quick and attractive way of neatening fine or lightweight fabrics when you can’t afford to lose too much off the edges.

Each ruffle was cut twice as long as the width of the sleeve because the fabric is quite fine and will gather up well. If you are limited for fabric (mine were cut on the straight grain) or if your fabric is quite stiff or thick, then 1.5x the width will be fine. I sewed a rolled hem on both edges of the sleeve ruffles and then ran two rows of a long gathering stitch along the centre line. Make sure the gathers are evenly distributed before sewing the ruffle down, I used a zigzag stitch to sew the ruffle in place.

I created a cuff to finish the sleeve ends by cutting two pieces of fabric from along the selvedge and sewing them on. My original plan was to create an elasticated cuff using a casing but then inspiration struck(!) and I sewed three rows of shirring instead.

Shirring works best on lighter-weight fabrics such as soft cotton-types [lawn, batiste, voile, Swiss Dot, pique, poplin if it isn’t too stiff] also most viscose/rayons, many silks, and fine woollens such as challis. This isn’t a definitive list by any means, basically nothing too thick, or stiff or overly ‘bouncy’. As with anything you’re unsure about I’d strongly suggest sewing a few samples first to see how it goes.

To begin (and these are very much my own thoughts on shirring, you will find many others which might vary to these-trial and error before you start is the best plan of action) you ideally need a bare minimum of 1.5x the eventual finished measurement but as a rule of thumb I would say at least 2 or 2.5x your finished measurement, especially if the fabric is very fine. I also wrote advice on shirring the back of a sundress in a previous blog post which you can still read here.

Gently wind shirring elastic onto your bobbin by hand, do not stretch it as you wind, you will use regular sewing thread on the top as normal. Set your stitch length as long as possible and, sewing on the right side of the work, make sure you backstitch at the start to secure your threads then sew your first row of stitching. Do not backstitch at the end of the row, carefully remove the sewing by gently pulling the elastic out so that there’s enough to tie off the ends eventually. Repeat by sewing parallel to the first row of stitch as many times as you require, I’ve just done three for the cuff. You could draw on the lines using a marker pen or chalk if it will help, I just keep the edge of the foot in line with the previous row of stitching. The work will gradually start to pucker up as you increase the rows. The photo above shows you what it looks like on the reverse.
This is the right side of the cuff, wherever possible work with the fabric flat and then joint it in a seam or to the next piece it’s connected with. It won’t be gathered up enough to start with so hover your hot iron with plenty of steam over the area and it will pucker up a lot more. When it’s gathered as much as it’s going to tie off or backstitch the threads/elastic to secure.
In the photo above, the top cuff is before the steam was applied and the lower cuff is afterwards, you should be able to see that the stitching is a fair bit tighter-looking.
Next I added small ruffles to the front raglan seams, also neatened with the rolled hem finish just on one edge. The rest of the Kingfisher was very straightforward, the ribbing band went on neatly and gives the neckline a nice finish. You could also use bias binding or make facings if you don’t want to deal with stretch but I like it like this.
Close-up of the finished neckline, I think I bought the navy ribbing from Lamazi Fabrics a little while ago.
Sleeve ruffle

I cut this top in a UK10 so it’s a closer fit than some tops I’ve generally made but I’m really happy with the fit, there’s still ample room for comfort and movement. From a fabric that was languishing in a box I’ve concocted a casual top I can wear in warmer or cooler weather.

Thank you to Janine for providing me with the pattern, I hope my review will be helpful, for a such a simple shape there are so many possibilities with it. If you haven’t tried any Sewing Revival patterns I’d definitely suggest you pop over there and take a look, and if you choose to follow any link I’ve created in this post or previous TSR ones, and you then make a purchase, I will receive a modest fee from it. You can also read my previous reviews for the Sidewinder pants, the Heron dress plus a hack, the Bellbird top and the Fantail top and it’s follow-up. If you want any more inspiration use the hashtag #KingfisherTop on Instagram or Facebook. I’ve got plans for a deep-cuff version later in the year, just so long as I don’t have another creative slump…!

Welcome back and thanks for reading this far, I’ll try not to leave it so long next time!

Until then, keep sewing!

Sue

Simple Sew Palazzo Pants updated

In 2019 I decided to try something different to dresses from the Simple Sew pattern collection for my blog post so I chose the wide-legged Palazzo pants. 

I always have a look at any posts or reviews about a particular Simple Sew pattern first to check if there are any pitfalls I should look out for which might influence my decision, or how I tackle making it, and the overall opinion of trousers was positive. I sorted out some fabric from deep in the stash, it’s a viscose from the now-defunct Adam Ross fabrics which has a good drapey quality, although I know it will crease so I’ll wear these permanently standing up! 

There are only 4 pattern pieces to the trousers-front/back/waistband/pocket- which makes them very simple to lay up and cut out, you could even leave out the pockets if you’re short on fabric but why would you leave out pockets?! 

I checked my measurements against the chart to decide my size, I also measured the pattern pieces to get some idea of the ease involved but I was optimistic they would be generally OK. If you’re very unsure, or between sizes, I’d suggest you make a toile that’s about mid-thigh in length to check the fit and comfort around your waist, hips and body length. Leave out the pockets at this stage, there are darts in the back and the front is flat, you could insert a zip in the back if it makes things easier to fit yourself but I didn’t bother. Always sew a toile as accurately as you would the garment itself because if you don’t bother cutting properly or following the seam allowances how will you know where the problems lie? That’s the whole point of a toile! Make any adjustments on the toile and transfer the changes to the pattern pieces. There are no lengthening/shortening lines marked on the midriff area of the pattern so I suggest, if you need to make either of these changes, drawing a line at a right angle to the grainline at a point midway between the waist and crotch level. Fold out or add in length through this line. There is a lengthening/shortening line for the leg length however.

It wouldn’t be a Simple Sew pattern if there weren’t some errors or anomalies to keep you on your toes and this is no different. On the back piece the pocket placement notches are only printed on size 8 and none of the others. Either transfer the markings to your size or remember to snip them when you’re cutting out the back.  

The notches don’t feature on all the size lines so transfer them across as required.

The lay plan for cutting out shows the main pieces interlocking, which is fine if you have plain or multi-directional fabric but don’t forget to keep the pieces running the same way if you have a distinct one-way print. Also, I didn’t cut out the waistband until I was happy with the fit of my trousers as it’s very shaped piece and if it’s too big or too small you’ll probably need to cut another. Don’t forget to make a snip for the centre point on the waistband, it could have done with a notch for the side seam position though as there isn’t one so it’s a bit of guesswork.

I’m not normally an advocate of overlocking the edges until they’re sewn up [because if you aren’t careful you can easily lose too much seam allowance in the trimming and when you join pieces together you could start to make the garment too small, plus your notches disappear] but, as many of the pieces here require the seams pressed open and flat, I overlocked most pieces first this time. 

You will find that for instructions 4 and 6 the words don’t match the diagrams but the drawings are correct 

Next the pockets go in (unless you wish to check the waist/hip fit first in which case tack or machine baste the side seams and leave the back open where the zip will be inserted in order to try the trousers on) The description for the pocket insertion is a bit vague, I’ve made a second pair since writing this piece originally and found it quite unsatisfactory which is why I have updated my advice.

Neaten the lower edge of the pocket bags first then pin to the trouser fronts matching the ‘opening’ notches. Next stitch in place from the waist to the bottom edge of the pocket bag using a 12mm seam allowance (see my notes on the photo above) Repeat with the trouser backs, then neaten the seam edges all the way down enclosing the pocket edges too. On the front only, understitch the pocket opening. Now you can pin the fronts to the backs and sew the side seams shut using a 1.5cms seam allowance, not forgetting to leave the pocket opening unstitched! Finally, carefully sew the bottom edge of each pocket bag closed otherwise your sweets will fall out inside your trouser leg!

After I’d assessed the waist size (comfortable to loose) and crotch length (comfortable) at this point I cut and interfaced the corresponding waistband [for some reason there were two waistbands printed out but I could find no discernible difference between them so just ignore one and cut a pair in fabric plus one interfacing] 

The reason the waistband goes on before the zip insertion is because the zip runs right up into the waistband to finish at the top, there’s no overlap allowed with button or hooks and eyes. You could use the overlap method if you prefer but you’ll need to add some extra length to the waistband on one end to allow for the overlap. 

The lack of indication of the side seams on the waistband means you’ll need to pin carefully to evenly absorb any fullness of the trousers to ensure a good smooth fit to the waistband. [the side seam is probably at the halfway point but not necessarily, especially if you’ve made any fit adjustments to the waist] 

With the benefit of hindsight I would make the waistband in two pieces, a front and two backs with the join at the side seam. This is for two reasons, first, it will allow you to make adjustments for fit more easily and, secondly, I’ve found the centre back has become slightly pointy and misshapen both times I’ve made these now. I believe this could be because the length and curve of the waistband means that it the centre back is very off grain, usually the centre back seam would be cut on the straight grain which gives it stability.

The instructions and illustrations for inserting the zip are reasonably clear however there seems to be a contradiction with an earlier instruction which tells you to sew up the back crotch seam. Illustrations 13-15 appear to have the CB seam unsewn and 16 tells you to sew it up after inserting the zip but previous diagram 6 tells you to sew it up! No wonder I got in a muddle!! My suggestion would be, if you’re using an invisible zip as suggested, leave the CB seam unsewn AND ignore instruction 11 to sew up the inseam until after you’ve inserted the zip. Alternatively, use your preferred method of inserting an invisible zip. Before sewing the waistband down I added two hanging tapes to each side seam so that I had an additional means to hang the trousers up if needs be.

On my second pair I’ve added a small button and loop inside the waistband because I found the zip a bit of a faff to do up without anything at the top of it.

you can also see here how the waistband rises to a slight point on each side in spite of it being fully interfaced. It isn’t the end of the world but I’m a bit cross it’s happened a second time, CBA to fiddle with it too much though…

Hopefully you’ve now arrived at a finished pair of trousers which simply need hemming. After checking the length wearing shoes (they come up pretty long) you could use the simple rolled hem finish as per the instructions or, as I did, leave a sizeable hem of about 5cms to give weight to the very flared leg width. I overlocked the edges to neaten and then used my blindhem stitch with the appropriate foot on the machine to finish [incidentally the photo is of a different project] I don’t use this technique often but it’s a good, and quick, finish on hems that don’t have too much, if any, curve. You could also slip hem by hand of course. 

Different project but still blind-hemming set up

The Palazzo pants are worth persevering with as they have a pleasing smooth fit over the waist and hips which is very comfortable and the leg is wide without being crazy-big. You could shorten them to culotte length very easily, they would work well in a variety of fabrics including linen, chambray or crepe, fabrics with a bit of drape and fluidity will look nicest as you don’t want to look like Coco the Clown!

I’ve made my second pair from a remnant of printed linen/viscose mix I bought from Lamazi recently.

I’m wearing them here with a top made from broderie anglaise that I found in a whole collection of fabric I was given by a friend. Her mother had been a wonderful dressmaker and I found the fabric pre-cut as this simple top which so I just sewed it up.
I’m wearing them here with one of my trusty Camber Set tops from Merchant & Mills
Same Camber, different trousers!
I cut this pair slightly shorter overall so that they aren’t so long if I wear them with flat shoes.

Overall I’m pleased with these trousers, they are a good fit and make a nice alternative to a skirt or close fitting trousers especially in warm weather.

I noticed that this particular post gets a huge amount of traffic so I hope this update clarifies any issues you might have had with the pattern. In fairness, it might have been updated and corrected since my copy was produced in which case you may be able to disregard some/all of what I’ve written!

Until next time, happy sewing

Sue

College Days refound!

Did you keep any of your old college course work? I am by nature something of a hoarder but even I was surprised when an unpromising cardboard folder came to light recently while we were having a grand clear out. It said “Russia 1980” on the outside so I was excited to think that it contained some memorabilia from my school trip of that year [The trip caused some local controversy at the time because that year the USSR had invaded Afghanistan just a matter of weeks earlier and some people felt we should no longer go. Our Head Mistress, the doughty Miss Pagan, was having none of it so we went regardless! Many countries boycotted the Moscow Olympics later that year in protest…about the invasion, not because my school trip went ahead]

I digress, upon opening the folder I found it contained nothing of that trip at all but it did contain many of the sketches and designs I produced whilst at London College of Fashion between 1983-85 including the final project when I produced two ‘mass market’ bridal outfits. Well what a trip down memory lane they proved to be! It was a period of my life when I was so happy with what I was doing, I’d finally found the right course for me (technical garment construction and not just design) I had a great bunch of college mates, I loved it.

I’m sharing the sketches partly because then I’ve documented everything for my own reference and enjoyment, but also because I hope there might be things of interest to others as well. Fashion-wise the early eighties were a time of puffball skirts and massive ruffles, enormous sleeves and ra-ra skirts, wide collars and even wider shoulder pads! Princess Diana was the style darling of the fashion magazines and whatever she wore became a trend. Last year I shared lots of press clippings and photos from my early working career which you can still read here.

The earliest image is from before my college days and it’s the dress I made for my school friend’s 21st birthday in October 1982. It was entirely self-drafted because I hadn’t formally learnt pattern cutting yet at this point. I can remember it clearly and the notes on the sketch are very thorough. It was a great party too!

What follows are the design and development sheets for an evening wear module [you can see now why it’s my first love when it comes to making] We had to design variations of similar dresses and gowns to illustrate how a garment could be adapted and simplified to cater for it’s appropriate market.

This was the high-end dress as a starting point, it still has fabric swatches attached. I will have trawled the fabric suppliers around the college in London’s West End and been one of those annoying students who would ask for swatches of expensive fabrics which they had no possibility of ever buying! Most of the shops and showrooms were amazingly tolerant of us. It’s such a typical 80s dress with ruffles and bows a-plenty.
This was the middle market version so the fabric would have been less costly and the ruffle quota was much reduced, it was similar but simplified. There would have been fewer hand-sewn elements but the silhouette is still recognisable.
This is the mass market dress and I made notes to the side as well. It is still recognisable as the coming from the same silhouette but costs were further reduced by using inexpensive fabric and much less of it. I wonder if I made a conscious decision to use felt tip for the sketch as well?
Variations for the high-end dress (I obviously preferred this market as the drawings are better!)
more development ideas
Crikey, getting very carried away with the felt pens here, I think there’s a hint of Antony Price and Thierry Mugler creeping in
I remember starting to make this one up but I don’t think it was ever finished, I wonder what happened to it? It’s probably in a box in my parents’ loft!
lots of detailed annotations
yet more variations
Blimey!
What I find interesting about all of these sketches is the similarity to the designs I would actually go on to work on at David Fielden after I left college. At this point I had no real idea that bridal and evening wear was the direction I would eventually take, I just knew that I really enjoyed it.
And this is where my bridal career effectively began, it was the optional bridalwear module in the second year of the course. I still had a hankering for theatrical costume so this was a perfect outlet for those ideas. I cut and made this dress, eventually I disassembled it and I know I still have the buttons at least in my ‘collection’.
Sleeves were clearly a ‘thing’ for me!
I don’t remember what these were related to, just general evening wear I guess
woaah, more enormous sleeves, and rosettes too

For my final project I opted to make two bridal outfits, I’m guessing they were mid-range and the jacket and skirt was probably intended as a register office outfit whilst the ‘Laura Ashley” dress and jacket was probably for a simple church wedding or registry office. I had a real client for the suit which was my then-boyfriend’s sister. This was handy because she paid for the fabrics for it, the jacket and skirt were white crepe-back satin and the blouse underneath was a soft green georgette. I think my ‘brand’ was possibly Jacques Verts who specialised in smart workwear for the modern working woman (definitely power shoulder pads with everything) or mother-of-the-bride type outfits with matching everything, dresses, jackets, hats, bags, shoes, the lot.

Quite a bit of Eighties power shoulders going on in these

Laura Ashley were hugely popular in the Eighties with their feminine and floral styles, they also produced a range of dresses for brides and bridesmaids at reasonable prices so that will be why I picked them as my brand for this project.

I remember those box pleats being the very devil to work on, I think I made things very complex for myself with them. I bought a pretty white cotton damask fabric from Laura Ashley to make my sample from (like tablecloth fabric but softer) I’m pretty sure there’s still a bit of it knocking about in one of my fabric boxes…I wonder what happened to the dress and jacket though?

Well, there we are, another wander back into the past for some Eighties fashion extravagance. You’ll see why I probably won’t embrace the current trend for wide collars because I did them the last time around (although fabulous sleeves will always hold an attraction for me) we were all busy being New Romantics but that Steve Strange eye make-up was difficult to pull off with glasses!

rocking my Eighties mullet (specs sponsored by Everest double glazing…)

Until next time, happy sewing

Sue

Fantail follow-up!

I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.

the first Fantail top

This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.

There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.

I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.

Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]

Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.

The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.

Pin the side seams together like so first, the raw edge of the deep elastic casing for the front is already pressed up by 1cm and the bottom of the ribbing is lined up against the notch for the casing.
Next, fold up the front so that it sandwiches the ribbing like this, pin in place. Now sew the seam starting at the fold on the hem. If you haven’t used this method before you may want to sew one side first and check it to make sure you’re happy with it, it can be a little confusing initially but it’s worth persevering.
Turn the hem to check it is level and, if you’re happy with it, neaten the seams however you wish. This is before I neatened the side seam but it will look like this on the inside.
The outside will look like this, so neat!

One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.

At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]

The ribbing is currently not edge-stitched in case it causes puckering

I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.

Until next time, Happy sewing

Sue

My latest Minerva make-Tilly’s Tabitha T-shirt dress

I seem to be constantly attracted to teal/turquoise/duck egg shades recently so this Art Gallery organic cotton jersey for my recent Minerva post looked perfect when it hoved into my field of vision! 

I’ve used Art Gallery knit fabrics in the past and the designs and fabric, whilst fairly pricey, are lovely quality. This particular jersey is an organic cotton (with a little Elastane) and very soft, a lighter weight than many so it would be good for children’s and babies clothing as well as adults. I love the print, I think it’s a vaguely ‘Tribal-esque’ graphic stripe and I quickly decided to make a Tabitha T-shirt from Tilly and the Buttons book ‘Make it Simple’ which I’ve made a few times before but to try out the dress hack version for a change this time. 

I traced off a new copy of the pattern using the horizontal lines indicated across the bodice specifically for the dress. I’m not long in the body but I thought it looked a little short so I added an extra 2cms to the bodice length. In truth I probably could have added more than that because I feel there isn’t as much blousing at the waist as there seems to be in the photo in the book [If you know, or suspect, you have a long body length then pay close attention to this before cutting your fabric, get someone to take your nape to waist measurement and compare it to the back pattern piece. If necessary then add any extra through the horizontal ‘lengthen/shorten’ lines, and don’t forget to do the front as well!] If you’re wondering why this matters, it will mean that the waist seam sits too high above your natural waist and could look more like Empire line. 

I followed the instructions in the book to draft my own skirt pattern which was simple enough, you only need one because the front and back are identical (you’ll need a decent sized piece of paper to do this) I cut the new front and back as complete pieces so that I didn’t have to cut anything on the fold, I also wanted a short sleeve so I traced one off. 

The fabric was a little bit curly at the edges so I took my time cutting out, be careful not to pull or drag the fabric at this stage because this could result in twisting of the finished garment. It’s helpful to mark stripes onto the pattern so that you can then match them to corresponding seams more easily. Cutting a single layer of fabric can really help make this more straightforward, and be less wasteful too.

Moving on, the suggestion for the waist casing is to use eyelets or buttonholes. I used a small round-ended buttonhole, whichever method you choose make sure you interface underneath first to stabilise the fabric. I used the quilting guide to help me sew an accurate 2cms seam to create casing. Once I’d sewn it I used a bodkin to thread the ribbon through.

Tiny round-ended buttonholes instead of eyelets
Using the quilting guide to sew an accurate 2cms seam to create the channel
I used a bodkin to thread the ribbon through, this was some tape I used initially until I got the better-matching teal grosgrain ribbon.

The rest of the construction was pretty quick because I already knew the T-shirt in size 5 was a nice fit, the skirt was a bit ‘hippy’ though so I took some off in that area. Following the drafting instructions the pattern piece is shaped for the waist but, for me, a straight rectangle would suffice.

The length was educated guesswork but I’m very happy with it and it’s not too restrictive at the hem, any longer or narrower and the skirt might need a split in it to allow movement. I have the advantage of using a Pfaff coverstitch machine to hem the sleeves and skirt but a twin needle or a zig-zag stitch will do the job too, and don’t forget to use a ballpoint or jersey needle. I used a narrow grosgrain ribbon in a toning teal to slot through the waist casing to complete the dress. As I mentioned near the beginning I might add just a little more length to the bodice next time but otherwise I’m really pleased with this Tabitha dress, it will be comfortable to wear for everyday and easy to roll up in a suitcase if I ever get to go on holiday again!

not keen to reveal pasty white legs!

Minerva provided me with this lovely fabric to write about, I’m delighted with the quality and I’m especially happy with the dress which is so just comfortable.

Until next time, happy sewing

Sue

Fantail Top from The Sewing Revival

Janine at The Sewing Revival, the pattern company based in New Zealand, is gradually creating a growing collection of stylish patterns and there is something very appealing in their deceptive simplicity I think. I’ve made a few versions of several of them now, including the Sidewinder pants, the Bellbird top and the Heron dress.

When Janine kindly offered me my choice of the range to choose from I picked one of the more recent releases, the Fantail top. At first glance it appears to be a simple raglan-sleeved top but along with the high/low hemline and elasticated front hem it offers variations of scooped, ribbing or V neck, elasticated or ribbing cuffs, and the back hem can be finished with ribbing too.

I had a rummage in my stash for some suitable fabric, ideally something with a bit of drape works best so soft viscose, crepe, georgette or chiffon if you fancy a challenge, cotton lawn, wool challis or fine linen would all work very well. Light- or medium- weight jersey will make it into a very chic sweater. I’ve no idea where my piece of navy fabric came from, probably I was given it by an elderly lady because it had a little ticket pinned to one corner saying it was 1 1/2 yards x 54” wide and cost 90p! It certainly smelt a little bit musty so the first thing I did was give it a quick hand-wash, it turns out that the colour ran quite a bit and I was left with blue hands for several hours afterwards!!

The patterns are sold in size bands which each contain 4 sizes (there is some overlap between the brackets) and each band is layered which gives you the option to print only the sizes you want so I printed UK 10 and 12 because, having lost some weight recently, I wasn’t sure which size would be best. In the end I cut a UK12 and it looks fine I think, it’s a roomy style so I could possibly go down a size but as I’m one of life’s ‘fluctuaters’ where weight is concerned maybe I won’t.

I like the instructions on Sewing Revival patterns because they are well explained and illustrated with photographs. If you’re an experienced sewer like me then you won’t necessarily need to follow them closely all the time but I do keep half an eye on them so that I don’t miss a step or construct in the wrong order which might have repercussions later on.

I made the scoop-neck version with elasticated cuffs which is probably the most straightforward variant, the round neck is just the right amount in my view, not too wide, not too deep. Raglan sleeves are super-quick to construct, I usually sew the neck facing on after the shoulder seams and before sewing the under arm seams.

The front and back hems are very different lengths and finished differently so don’t rush through these elements. I ignored the suggested bias-binding finish on the back hem and used one of my favourite techniques of a pin-hem instead ( I wrote instructions for this last year in this blog post on hems )

The USP of this top is the deep partially-elasticated front hem. It looks great but it’s really not difficult to achieve. There are suggested lengths to cut your elastic for each size although you could use a shorter piece over the same length if you want to pull the front in a bit more. Or you could also use a narrower elastic but the pattern is cut for wide width like this so you may have to make an alteration to the hem depth accordingly for the channel to work.

This is the side seam where the two levels come together, make sure the back hem is fully enclosed within the front so there is a nice smooth line from front to back.
The finished top on the stand.
I sewed the deep elastic cuff version, there’s a subtle amount of gathering.

As I said, this is a simple top with eye-catching details, it’s probably a half-day project if you’re got everything you need when you start.

The sun came out so we headed out to the garden for photos. I’m wearing one of the pairs of Sidewinder pants I made in 2019, they are a bit baggy now.
There’s a nice dip to the hem at the back.

I’ve already got some fabric lined up for another Fantail hopefully very soon, a nice piece of soft viscose from Sew Me Something and ribbing given to me by my friend Kate which by sheer good fortune coordinates perfectly! There’s lots of possible variety with the Fantail, short sleeves is another for example. Incidentally, there is also a slightly different sleeveless version of the Fantail available too.

Until next time, Happy sewing

Sue

Box pleat shirt from Trend Patterns

I’ve made loads of different clothes over the decades but actual shirts for myself have not tended to be among them. I’m not sure why, possibly because I had to wear boring school shirts for years and years, and for a while I had to wear a uniform when I worked for the John Lewis Partnership so my personal preference has tended to softer blouse shapes. That said, I love to see a crisp white shirt especially when it’s given an inventive twist. It’s a wardrobe staple and yet there’s always room for a new version. 

Lucy at Trend Patterns has just released the first 3 patterns of what will become a shirt collection and each is available printed, as a PDF or as a complete kit with pattern, fabric and trims. TPCSH1 is a feminine Pussy bow top with shirt sleeves and a ruffle hem, TPCSH3 has stunning gathered ‘angel’ sleeves which really make a statement whilst the body is kept simple and traditional so that the sleeves do all the talking. 

Lucy offered me the kit of TPCSH2 to try out, it is a box-pleated front shirt, deceptively simple to look at but those details take a little time to get right. It’s classified as ‘moderate/hard’ and I would agree, not because the elements in themselves are especially difficult but each of them needs some experience and precision to execute so I wouldn’t recommend this as your first shirt project. 

The kit comes with enough good quality plain white cotton poplin to make up to the largest size of a UK 22, along with Trend-branded buttons (a nice touch) and iron-on interfacing. All you need to provide is your own thread! 

I started off by taking my measurements and comparing them to the sizing chart, there is also a chart giving you finished garment measurements too which is helpful because it will give you some idea of how oversized the shirt will be when it’s finished. I made a UK 12 and as you will see from the finished photos it’s a very generous fit, to be honest, if you want a close-fitting shirt then this particular pattern won’t be the one for you. 

I opted to trace off the pattern, there are two separate fronts, right and left, and a whole back plus sleeves, yoke, cuffs and collar. There is no pattern piece for the bias binding for the sleeve placket, you just need to cut yourself two bias strips approximately 30cms x 4cms. The right and left fronts are the same except for the extra on the centre front which creates the folded fly with concealed buttonholes. I traced off one front then, to save some time and to ensure they were identical, pinned it to more spot and cross paper before cutting them out together so that I had a mirror version with the additional front added. It’s really important to trace the front very carefully because of the three box pleats, if they are each a bit off you risk the pleats not sewing together accurately which will leave you scratching your head. There are a lot of drill holes to mark the stitching which will eventually hold the pleats in place, don’t be tempted to miss any out because they are also really helpful when you’re folding and pressing the pleats in position. You could choose to trace just half the back to save paper if you intend to always cut it on the fold anyway but having a whole piece gives you the option to have the fabric out flat, besides, it’s almost always more economical to cut fabric out as a single layer [this can be especially helpful if you ever need to do some tricky pattern placement or matching]

Because the fabric is plain, placing the pattern pieces and cutting out was a breeze-no pattern matching, yay! I spent quite a while making traditional tailor’s tacks for every single one of the drill holes. You could use a washable or some other kind of disappearing marker pen if you are confident that it definitely won’t come back to haunt you but I wasn’t going to take the risk on plain white fabric! 

In the past I’ve occasionally found some of the earlier Trend instructions a bit tricky to follow but the more recent ones have illustrations rather than photos and I found this set very clear. My biggest piece of advice would be to read then re-read the instructions before you start, and to highlight anything that you know you’re going to have to really concentrate on, this isn’t a race after all. 

Constructing the fly front and button stand first, including the buttonholes, was satisfying, I often feel like I’ve run out of steam by the end of any project which requires buttonholes and it’s a bit of a chore by then but this gets it out of the way nice and early. [I should add at this point that I started out sewing with a fine size 60 needle so as not to leave too many noticeable puncture holes in the plain fabric if I went wrong or needed to unpick. However, this size needle kept skipping stitches for some reason so I went up to a 70 and had no further problems]

transfer all markings and instructions to the paper pattern if you’re tracing it off. I made tailor’s tacks through every drill hole

My second piece of advice would be to press your pleats on the ironing board if you possibly can. I only have a small heat-resistant board in Threadquarters which meant I was constantly moving the fabric which was not ideal, it was so much easier on the ironing board because the whole piece fitted on. Do not rush this part, with pure cotton fabric you can have the iron on pretty hot but do be careful of your fingers with hot steam. Pin, tack or Wonder Tape the pleats in position once pressed if you want to. 

pressing the pleats on the ironing board, the snips top and bottom along with the tailor’s tacks will help you get each one in exactly the right place.
In progress-making the bar tacks

The instructions are to stitch down each pleat according to the markings using a few stitches. I did quite a lot of testing using a variety of decorative stitches for this before I committed to the bar tack. The next challenge was getting each of those bar tacks (30 in total!) central over the pleat. My machine comes with a number of feet which are used in conjunction with the decorative stitches and one of these has horizontal red lines which proved very helpful in getting lined up for every bar tack. After making a few of these bar tacks I ‘got my eye in’ so I could tell very quickly where to start each stitch, having the needle stopping in the up or down position is an absolute essential feature on my machine for me and it was brilliant during this, being able to lift the foot to check I was sewing in the correct place without the work shifting was so helpful. The photos will hopefully make my method clearer to follow. It’s vital to take your time and be as accurate as possible during this stage because the box-pleats are the USP of this shirt and it will obvious if they are off-kilter. I sewed in white thread but you could use a colour, or even hand embroider to give your shirt a totally original look.

testing various stitches including triple straight stitch and arrow heads, the difficulty was going to getting every single one central over the pleat

Incidentally, Trend will be creating a series of video tutorials to help so I suggest you check their Instagram account or the website for those. Also, there was a slight problem with pattern markings for the back box pleat which were incorrect. This has been rectified but if you bought a copy very soon after release you might find you have to scratch your head a little, the notches were in the wrong places. Check the website if you’re in any doubt.

the right front, including the fly, taking shape
the shirt with the side seams now sewn up, ready for the sleeves to go in
sewing the continuous binding to the sleeve opening. the instructions don’t call for it but I like to sew across the top of it at a 45 degree angle to encourage the binding to stay on the inside
close up of the finished front
all done
close up of the finished bar tacks

I followed the order of construction to complete the shirt (I usually do the first time I make a pattern) but personally I would put the collar on after making the yoke. I like to do it before the side seams are sewn up or the sleeves are inserted, unless there’s a technical reason not to obviously. 

the finished back yoke
I popped a bar tack in the middle of the back to hold the pleat in place, this hadn’t had a proper press yet

Everything came together really well, I’ve always found Trend patterns are accurately drafted so I know the pieces will go together well without major discrepancies-this is why it’s so important to trace off carefully if it’s your preferred method, if seams or notches don’t match up you won’t know where the fault lies [the same applies to accurate cutting out too] 

The sun came out so we could take some outdoor photos, I’ve paired the shirt with my much-worn Megan Nielsen Ash jeans
is it a bird? is it as plane?…
I’ve pressed the pleat now

Clearly not everyone will want to make a shirt that is going to take a sizeable amount of time to construct, or to launder afterwards for that matter, but if we only made simple loungewear for ever then the art and skill of making our own clothes will be lost, just at a time when so many people have discovered, or rediscovered, the joy of sewing for themselves. There will always be a place for a classic white shirt and Trend has created a small but growing collection with original twists on the genre. The last year has been so tough for small business owners so I really appreciate being given this kit to try out, I wasn’t under any obligation to review it other than share some photos but personally I have no problem with sewing and writing about it. I will always try to give you a balanced view and if I can support a little business by giving them some positive exposure then I will. Alongside that I’m keen to demonstrate that a design-led style doesn’t have to beyond us ‘ordinary’ sewers either, if you like it then sew it! 

I hope I’ve given you some idea of what will be involved in making the TPCSH2, if you’re looking to push your skills on a bit this could be a good project. Maybe you need/want a plain white shirt in your wardrobe [amazingly I didn’t have one in mine, just a couple of short-sleeved ones] I might layer this with a sleeveless tank top over it, or a waistcoat could look interesting. This is a typical cotton poplin shirting but you could use a variety of fabrics, you could have fun with graphic prints or stripes, try something soft like double gauze or a crisp linen? Or what about harvesting the fabric from several well-worn mens shirts to make a more patchwork look. Take your time though and enjoy the process.

I’ve got a long-sleeved T-shirt under it because it was a chilly day and it will be perfect for the day I can return to the V&A. I don’t know about you but I’ve really missed putting an outfit together to go on a nice day out, deciding which of the lovely garments I’ve made that I want to wear and how I’m going to accessorise them. It seems such a small silly thing to miss but I shall be so glad when I can start doing it again.

Most of all, thank you to Trend for giving me the opportunity to try the kit, until next time,

Happy Sewing

Sue