As one of the new team of Backstitch Ambassadors I relished the chance to go along to the gorgeous shop at Burwash Manor to browse their fabrics and patterns. It’s about 40 minutes from where I live and I love to go there whenever I get an opportunity, I’ve previously included it in this round-up of Hertfordshire based fabric shops. To be completely honest, I already had an idea that I would like to make the newish Merchant and Mills Ellsworth shirt but I had an open mind about fabric choice. In my head I was looking for a lightweight linen-type but as soon as my eyes alighted on the checked double gauze I was all in for that! It was folded on the bolt with the large check visible on the outside but when I discovered the reverse was small checks my mind was blown and I knew I could mix the two sides to create a unique garment. There are currently 4 colours available but I settled on the pretty shell pink variation. I took 2 metres as per the pattern instructions but after cutting it out (and as I’ve found before with M&M patterns) I had almost 50cms left over, even allowing for pattern matching. It’s very annoying when this happens and I’ve made a note for next time. I cut a straight UK 12 with no mods.
The Ellsworth is quite typical of M&M’s aesthetic, it is a very wide and loose fit shirt with a stepped hem, a collar and button placket and cropped, cuffed sleeves. It will lend itself towards fabrics which have an element of fluidity and drape such as soft linen or cotton-types, light woollens, crepe, chambray or babycord. Some light- or medium-weight jerseys would probably be okay but I wouldn’t recommend ones with a lot of stretch.
Another reason for choosing this shirt (apart from the fact I liked it anyway) is because I had seen a few makers on Instagram were having trouble interpreting the instructions for the placket. I hope what follows will give you a bit more information and guidance.
Away we go…
Definitely give your fabric a wash first, its light loose weave will shrink a little (it will be very crinkly when it comes out of the machine but don’t panic, it will press flat again. You may ultimately prefer the crinkles but they will be hard to work with during the making process so press as you go for now)
If you are a person with no patience when it comes to laying up your fabric, or time is tight, then this may not be the fabric choice for you because it does need some careful laying up and folding to get the checks straight and matching [or you could cut every piece on the flat to save on the head scratching] There were a couple of places where, in spite of my best efforts I was bit off but I won’t tell you where they were and you might not notice anyway! It does have the advantage of the large check being 3cms square and the reverse is 1cm squares so a 1cm or 1.5cm seam allowance shouldn’t be a problem to follow.
The problematic placket is made first so here’s my interpretation of the instructions for you. Begin by interfacing all pieces as instructed (although I interfaced the whole placket rather than half as the fabric is quite fine and a bit unstable)
Next I moved on to the sleeve opening which is neatened with a very narrow bias strip.
The hem facings are sewn on next, then join the shoulders using French seams. This is a useful technique if your fabric is very fine, sheer, or frays badly, or if you don’t own an overlocker. Obviously you can sew a flat seam and overlock/zigzag if you prefer. You could also topstitch these seams if you want a bit of interest on them. My personal preference is to press shoulder seams to the front, this is so that the seam is slightly less visible when looking at it.
I found the collar instructions straightforward so I won’t go into them as well, I opted to catch the lower edge down by hand so that I had control over it and a really neat finish. I also added a label from Little Rosy Cheeks.
The sides are then French seamed, be careful with the step at the lower edge and make sure you don’t take too much seam allowance on the seams because this could throw out the overlap at the top of the opening. I used the bartack stitch on my Pfaff to secure it as this could be a point of weakness further down the line.
I cut a straight UK 12 with no modifications and I’m 5’5” tall but if you’re taller you might want to lengthen the shirt as it’s quite cropped at the front.
I’m very pleased with how the Ellsworth has come out, I’ve worn it with flat-front Eve trousers but it will look good with a skirt or even a dress under it for layering. I’m going to have a look through the stash to see what other fabrics I can make it in now!
I’m delighted to have the opportunity to write for Backstitch because it’s a lovely little shop which I’ve been visiting for a few years now. It’s in a beautiful rural location and sells a really nice, well-considered range of quality fabrics and indie patterns and sewing books. As Ambassadors we are provided with gift vouchers to shop in the store, it’s entirely up to us what we make and how much of those vouchers we spend, the balance can be kept to spend on another occasion if we choose to. If you don’t live anywhere near enough to pay a visit yourself then Backstitch has a recently revamped website to shop through too, their range of yarn, knitting and crochet patterns are all on there too.
I hope you have found my review useful, that’s always my intention, do write in the comments if there’s something which still isn’t clear and I’ll try to help.
Well that was another weird year wasn’t it!? I’m not gonna lie but I’ll be glad to see the back of 2021. For every good event there seemed to be two or three stinkers which I found made it really hard to see positives anywhere. I know that there were some good things though and I’m incredibly grateful to have the life that I do so I don’t want to dwell on the downside, let’s move into 2022 with an air of cautious optimism!
I entitled my round up for 2020 as ‘sewing in a time of pandemic’ and I’m so glad I didn’t know then that 2021 was going to be ‘part two!’ Anyway, I’ve collected a few photos to round up my sewing and other events I was able to get up to during 2021 although I’m not sure if they are particularly chronological…the length and colour of my hair at any given time will give you a bit of a clue!
I was looking for new sewing challenges early in the year during the next long lockdown and Mr Y was the lucky recipient of a few items including this Carmanah sweatshirt by Thread Theory. The fabric was kindly provided for me as I’m part of the Lamazi blogger team.
I was selected to contribute some articles offering sewing tips and advice for an online sewing project in the early spring but after just two such items they just stopped contacting with me or replying to my emails. Bit rude I’d say, I’ve no idea what was wrong because they never had the courtesy to tell me, and I’ve no intention of wasting more time on them frankly.
As you know if you read my posts I like to reuse patterns if they have lots of options so I’ve sewn several variations of a number of Sewing Revival patterns during the year, including the Fantail top below which I made in an ancient remnant in my stash which I believe somebody once paid 90p for!
I wrote just three specific Sew Over 50 blog posts in 2021, the first was a summing up of lots of ideas and inspiration for how to sew more sustainably which the followers of the Sew Over 50 account contributed. There was a lot of it and it definitely worth a read.
I was a guest editor on the Sew Over 50 account in the autumn when we chatted about mannequins in our sewing practice. Many of you contributed some brilliant and insightful comments, I wonder how many people have gone on to buy a dress form, or use the one they have differently, or more often, as a result?
Sew Over 50 stalwart Tina generously shared with us the many resources she has gathered together over the last couple of years for sewing and adapting patterns and clothing after a breast cancer diagnosis. It has been one of my most read articles on the blog since it was published in the autumn and I know Tina is happy for followers to contact her via Instagram for any advice or support she can offer them. For me, she very much represents the positive aspects of being a part of this worldwide community.
One of my favourite ‘in person’ events in the sewing calendar, Sew Brum, quietly took place in the autumn and my lovely mate Elizabeth kindly put me up overnight and we had some quality shopping and sewing time together. Our friend Melissa even joined us for a couple of hours for a Zoom sew! Plus I ran in my first (and so far, only) Park Run too! phew, it was a busy and almost-normal 48 hours.
I finally made a jumpsuit (or two) at the end of the year, it’s the Cressida by Sew Me Something Patterns.
For quite a while I had wanted to organise an informal sewing event and they were finally able to happen in October and November with #HertsSewcial It was such a joy to be reunited with my Sew Over 50 stalwart friends Ruth and Kate, along with meeting several other online friends like Bev and Elke in real life for the first time. We had so much fun sewing and chatting together, the time flew past far too quickly and I very much hope I can organise some more in the New Year, current situations permitting.
And my final sewing treat of the year was being able to meet up with Judith Staley in her hometown of Edinburgh!! It was much too brief but absolutely better than nothing, we had so much we could have talked about but that will have to wait until our oft-rescheduled and much looked forward to sewing get together next spring…fingers tightly crossed!
My final personal make of the year was another Maven Somerset top in this celestial jersey I bought at the Lamazi open day. It’s festive without screaming CHRISTMAS!
And so ends another year of sewing and other stuff, as well as the new garments I’ve sewn for myself there were many other occasions when I wore, and re-wore, favourites which didn’t need to be photographed! I fervently hope 2022 brings better times for everyone and that we can adapt to our new or changed ways of living. Sewing will continue be a big part of my life and I hope there will be some new and exciting projects and opportunities during the year. There are so many wonderful people in this community and the support and encouragement that swirls around has been so important during another trying year-I hope I will get a chance to meet up with more of you in person during the next twelve months.
Until then, thank you for reading my wafflings, happy sewing and a very happy New Year,
I’ve been dithering for aaages about sewing myself a jumpsuit for various reasons. The main one is because I’m haunted by the memory of an ill-advised white cotton get-up purchased one lunchtime from Leather Lane market in about 1986….ah the folly of youth. Of course I was channelling Pepsi and Shirlie and thought I looked the bees knees but I’m just grateful there’s no photographic evidence to prove very much the opposite was true!
I digress. My other reasons are simple enough; what about when I need the loo? (which is often) and, will my bum look big in it? [Of course the size of my bum should never be up for discussion but decades of reading articles in magazines telling a woman what she can wear because of her age/ weight/ height etc etc can’t be unlearnt overnight]
I know there are some cracking patterns for jumpsuits (and I cannot bring myself to call it a boiler suit because that just makes me think I should be in the inspection pit under a Class A4 Pacific locomotive with a monkey wrench in my hand) and I’ve even got as far as buying and printing the uber-popular Paper Theory Zadie but that’s where it ended.
Anyhoo, I went to the recent Knitting and Stitching Show at Ally Pally and while I was at the Sew Me Something stand I signed up to receive their newsletter. The upshot was my name was randomly chosen and I won a pattern of my choice from their selection. [You might know that one of my favourite tops is their Imogen blouse which I’ve reviewed here in the past] This time I decided to go mad and choose their Cressida jumpsuit. It is a simple shape with short grown-on sleeves, a collar and rever, bust darts, a waist seam, hip pockets, slightly cropped length and an optional belt. I received mine as a paper pattern but it is also available as a PDF, plus PDF with a printing service too if required.
Because this was a completely new type of garment for me I decided to make a toile version first so I used some medium weight denim I bought in Hitchin market. I made the slightly rash decision not to pre-wash it because I was in a hurry to get started so I gave it a really good steam press instead. With hindsight this probably wasn’t entirely wise because the colour came off on my hands terribly and there was some shrinkage when I eventually washed it, although fortunately not enough to make it unwearable.
Based on my body measurements and the finished garment measurements I opted to make a UK size 12. Aside from my own foolishness with the fabric shrinkage I’ve found the 12 to be a good fit. The body length was just right which means I can sit or move comfortably in it, the only change I made was to the second version which I made using some beautiful Cousette viscose twill provided for me by Lamazi Fabrics to wear at their very first open day in mid-November. I decided to add 1.5cms to the bodice using the lengthen/shorten lines marked on the pattern. However, I probably didn’t need to have done so because I was making that decision based on the slight shrinkage of the denim! Not to worry, it means that getting in and out of the jumpsuit is a bit easier because of the extra wiggle room.
A couple of details I tried out on the denim jumpsuit were to use a variegated sewing thread for the decorative top stitching and buttonholes which I bought from William Gee. I also added belt loops which aren’t included as part of the pattern but I wanted these so that the belt sat in roughly the right place and covered the seam. By the way, I felt the included belt pattern piece was very long so I shortened it quite considerably, by at least 50cms. I had recently bought some gorgeous buttons from Pigeonwishes, also at the K&S Show and these were exactly the right colour, size and quantity I needed-perfect!
Overall I was very pleased with my denim Cressida so I was happy to go ahead with the viscose twill version. As I said earlier I added a little bit of length but possibly didn’t need to, being a button front opening does mean that I’ve given myself just a little bit more space to get the sleeves up and down from my shoulders. Because we’re heading into winter in the UK now I have opted to wear a long-sleeved T-shirt underneath at present (both ancient RTW ones) Although I made the fabric belts for both I can put a leather one through the loops instead and it looks good.
I have found the instructions for Sew Me Something patterns to be very thorough and clear and the Cressida is no different, the pattern goes together very well. Jules uses a slightly different method for sewing the collar together which I haven’t used before but it gives a very nice end result. I would rate this pattern as a moderate level of difficulty because of the buttonstand at the front but otherwise there’s nothing here to scare the horses particularly.
When I made the second Cressida in the viscose twill I didn’t make the same mistake twice and pre-washed the fabric first! The viscose has a beautiful weight and drape to it and I love the autumnal colours. It has a lovely soft handle too, you just need to be as careful as possible when sewing it together because viscose twill does have a reputation for snagging which can result in slight ‘catches’ or runs in the print which is irritating and disappointing. My advice would be to make sure you use a new fine needle, possibly a Microtex, and certainly no larger than 70/75 size to try and minimise any risk. Also, viscose is often known for creasing a lot but I didn’t find this twill to be too bad-damning with faint praise possibly but I’ve come across far worse.
As I mentioned earlier, I made the Cousette viscose jumpsuit to wear at the recent Lamazi open day, I’ve been one of their blogger team for some time now so it was lovely to have the chance to visit their new premises (they aren’t a retail shop but check here for their visiting arrangements) fellow blogger Sharlene Oldroydwas also there having travelled especially from Northern Ireland so it a real treat to finally meet her in real life.
So there we are, a lucky win from Sew Me Something and a generous gift of fabric from Lamazi means that I’ve broken my long-held suspicion of jumpsuits. Both have been worn a few times already and, because of the short sleeves, they will get worn in the summer months too. Taking into account my worries of getting in and out of the jumpsuit, it hasn’t been too much of an issue. The denim one is a little more tricky to get over my shoulders because the overall length is slightly less but I haven’t had a problem with the viscose edition.
The Cressida would also look lovely made up in a variety of fabrics including linen or crepe, or even a luxurious silk-type perhaps?
In 2019, when I was writing a round-up of the first year of activity on the @SewOver50 account Tina @bricolagedk gave me her very honest, and touching, response as to why she was so happy to be a part of our community. She had a very different reason for joining in to many. Living in Denmark, she was struggling to adjust to a new and altered body-shape after a mastectomy, RTW clothing just wasn’t right any more so she wanted to start sewing her own again after many years but found a lack of patterns and information available. She contacted Judith directly and, when Judith shared the question with everyone, the response was extraordinary. I’ll let Tina explain in her own words,
“You posted my request and I got an amazing response. People gave me drafting tips, and told me of helpful sewing tools for hurting hands and weak arms. A couple of post mastectomy sewers also contacted me. Others from the SO50 community gifted me patterns, and translated patterns for me from languages I didn’t understand. They told me of patternmaking books with drafting tips for asymmetric sewing. But most of all, everyone was extremely supportive, and in less than a year I have gone from feeling so alone and insecure about how to sew for my changed body, to being part of a very supportive,helpful and inclusive community.”
Over the following two years Tina has amassed a huge number of resources which could be of use to the many women affected by a breast cancer diagnosis, or know someone else who is and whom they would like to help and support by sewing articles for them. After all her hard work Tina is very happy to share them with our community, we are indebted to her wonderful act of generosity and ‘giving back’ to the SO50 community which responded with open arms to her. I am very happy to be able to publish them all here on my blog as a means to make them available to you.
Tina has already given her own headings or categories to each topic, and provided the links which you see here. They include not just everyday clothing and ideas how to adapt them but things like comfort cushions, post-op gowns, turbans, as well as ideas for self-drafting too. She also suggests various hashtags which might link you to other women in the same situation.
If you need post mastectomy op drain bags, there is a tutorial below or use the vest from madeit patterns. Drain bags can also be sewn into a dress, top, hoodie, cardigan, shirt https://www.youtube.com/watch?v=YOLqkRvG5A0
I do hope you will be able to access the many and varied resources which Tina has accumulated (a few are not in English but hopefully Google Translate can help here whichever language you need to access them in) and I want to thank her on all our behalves for the sheer effort she has put into researching and collating them, and for now being only too willing to pass them on for us to use. Many of the resources are free for anyone to access and not for commercial use so please be mindful of that and to credit the source where it’s due if you use any of them yourself, now or in the future.
An object synonymous with sewing our own clothes, or a typical sight in a fashion atelier, is the mannequin. A dress form, dress stand, tailor’s dummy, call it what you will, it is a representation of a human form frequently in an idealised way and often without any of our bodily idiosyncrasies.
They are used for fitting and draping, for working out tricky styling or seam lines, for planning, frequently for sticking pins into, or they can stand silent in the corner of the room under-used and gathering dust.
The Parisian company Stockman was established in 1867 and still supply the French couture and fashion industries with their own version of the mannequin, this time being a papier mache base with padding and cotton fabric over the top.
Once you start looking you will see there are lots of options for the home sewer when it comes to mannequins and it really boils down to how much you have to spend.
For this article I’ve researched some of the options for you, believe me when I say it’s a bit of a rabbit hole! I’ll give you some idea about each of them beginning with my own purchase of an adjustable stand.
I used a bra I didn’t wear much and, as you can see, I also used pieces of wadding. you could use those chicken fillet ‘bust enhancers’ that might be lurking in the back of a drawer too although you can’t easily stick pins into them if you need to. While researching for this post I also saw suggestions to use dried beans, this could be useful if gravity has taken a hold of your attributes. I added extra wadding where my fatter areas around my midriff are, on the tummy and also on the butt to give shaping (I guess you could put a pair of briefs on her too and pad them if you have a particularly luscious booty!)
I should tell you that very shortly after buying my lovely new dress stand 3 years ago I won the second one in a raffle!! I had thought that I wouldn’t keep it but it’s actually been very useful when I do bridal and other alterations. She is Indoor Doris because she’s in the house whilst my body double is Outdoor Doris because she lives in Threadquarters-simples!
If you don’t have loads of cash to spare I discovered that there are quite a number of tutorials out there to make you own using various different methods. They all involve wrapping the body in some way, starting with wearing a close-fitting T-shirt or dress to protect the skin of the model and then encasing the torso in duct tape or plaster-soaked bandages. Try searching Pinterest or YouTube, or Threads magazine had a number of articles on how to make your own. These probably won’t last a long time as they aren’t very robust but if you are a cash-strapped student for example then it might do the job for a while. I also found patterns to sew your own which looked pretty good but you do need patience and tenacity to get a good result.
Since publishing this, and as a result of lots of comments on the SewOver50 account, Beatrice Forms got several positive mentions, as did Bootstrap fashion so I’ve created links to their websites.
If doing things on a budget isn’t an issue then you can go to the other end of the spectrum and have a custom-made mannequin to your exact needs and requirements.
Once you have your mannequin what will you use it for. My friend Theresa Hewlett is a pattern cutter and tutor extraordinaire and one of her favourite methods of making a pattern is to drape, or model, on the stand. This often involves pinning flat pieces of cloth onto the stand and manipulating them to create pleasing and original shapes which might not be possible by flat pattern cutting alone. Try it sometime, it’s great fun and very liberating and creative.
So before you buy a mannequin it is wise to have a budget in mind to start with, and to understand what your needs might be from it. There shouldn’t be any need to spend loads of cash because there are plenty of cheaper options, secondhand or reconditioned could be a good bet too. Shop around, there are lots of models to choose between so pick the one that is best for you and not just the one that looks pretty. This is one of the more expensive pieces of equipment that a home sewer can buy so choose wisely. My first mannequin lasted many years, although the base had been replaced before she gave out altogether.
For me personally my mannequin is a very useful piece of kit which I use often, and I’m happy with the adjustable kind because I’m a person whose weight and body size has always tended to fluctuate. Even if I had the money to buy a beautiful professional mannequin I don’t think I would because there would often be periods of time when it wasn’t actually ‘me’ which would be both irritating and depressing!
If you have the room and the budget for one though it’s well worth considering.
What have been your experiences with using a dress stand or tailor’s dummy? Have you found it an invaluable piece of equipment, or is it a home for spiders in the corner?
Essentially it’s a raglan cropped-sleeve sweatshirt or dress with ribbing cuffs, hem and neckline. The sleeves have darts at the shoulder to give them some shaping and the neckline is quite scooped out. Most of the sweatshirts I’ve made in recent years have been quite baggy and over-sized so I thought I would try the closer fit of the Fielder for a change. Based on my own body measurements and the finished measurements given on the packet I opted for a UK size 12, and I lengthened the sleeve to be wrist length.
I bought the unusual ‘quilted’ fabric from the M&M stand at the recently-revived Knitting and Stitching Show at Alexandra Palace in London. It was so good to be able to browse a whole selection of stands once again, it had been over 18 months since any of us were last able to do that. The colour reminds me of old-fashioned sticking plasters, the triple-layer fabric is a clever weave but the loose threads through the middle layer do come adrift quite easily. Because of this I overlocked every piece around its edges to prevent further disintegration. I also stay-stitched the neck edge before it had a chance to stretch.
I haven’t mentioned the rest of the garment construction because it’s a very straightforward sew, I just made it a bit harder for myself…but in a good way.
Anyhoo, that’s one way to elevate a plain top into a slightly more interesting one (IMO!)
I’ve been an absolute fraud when it’s come to writing any Sew Over 50 blogs for ages and ages which I feel very guilty about. I’ll hold my hands up and say that the community has been an absolute lifeline during the last awful 18 months that we’ve all been going through-the support, friendship, inspiration, encouragement and camaraderie that I’ve found through the account has been personally so important but my writing and blogging has really tailed off along with my mood in general. Judith and Sandy do an absolutely awe-inspiring job of running the account for us, along with fantastic guest editors to keep us all coming back time after time-thank you thank you THANK YOU!!! The sheer variety of topics covered has been incredible but I thought I’d dip my toe back into the @SewOver50 blogging waters by writing a round-up of the August 2021 challenge #So50SustainableSewing
If you follow Judith’s personal account @judithrosalind you’ll already know she has been increasingly sewing in a more mindful and sustainable way for some time now and has wanted to launch a challenge on the account so that we can all join in with this in some way.
We all know that ’the most sustainable garment is the one already in our wardrobe’ and that is true but it doesn’t allow for the important creative outlets that our sewing and garment making gives us. So, if we are to continue sewing for ourselves or others, how can we approach it?
Judith’s idea for the challenge is a simple one-we use only fabric which is already ‘in the system’, especially if it’s already sitting on our shelves. In other words, we source it in a variety of inventive ways and these fabrics could include…
remnants or scraps
charity or thrift shop finds-fabrics or garments
textile manufacturing waste
fabric swaps in person or online
discarded garments, table cloths, bed linen, curtains etc
This isn’t a definitive list of course and over the whole month of August several guest editors shared their brilliant insights to inspire us.
The month kicked off with Judith making a guest appearance on the Sew Organised Style podcast chatting with Maria Theoharous about her idea and lots of ways for us to get involved. Maria always has Sew Over 50 Thursdays too which feature guests from our community who share their sewing stories, techniques and inspiration so it is definitely worth having a listen while you’re sewing, or walking the dog!.
Throughout August there was a great line-up of guest editors including Jen Hogg @jenerates who is so overflowing with ideas that she had 4 separate posts! Her first post encouraged us to ‘shop our stash’ if you have one…I know I do! Like her, some of my fabrics are relatively recent purchases, occasionally on impulse although not always by any means, whilst others are fabrics I’ve acquired over a long period of time and from various different sources. Jen sees it as part of her creative process, to have the choice amongst her stash, to inspire her ideas for making. Jen is a multi-talented woman who not only sews but knits, embroiders, makes jewellery, works leather….in the UK you are probably familiar with her from being a contestant on the Great British Sewing Bee, plus you can also listen to her chatting on Sew Organised Style too!
Next was Sue Stoney @suestoney in Australia who shared her love of collecting all sorts of vintage items for later use including beautiful table linen and haberdashery. Many of us probably have buttons, zips, hooks and eyes, threads, elastic (doesn’t last indefinitely though so check it hasn’t perished before you sew it into something you don’t want to fall down around your ankles!) which came to us via our mothers, grandmothers, aunts, neighbours etc etc. I know I love to rummage amongst the hundreds of buttons I have to something special and individual, and I can’t recall the last time I actually bought hooks and eyes or press studs!
Whilst the challenge is intended to encourage us to get creative and inventive for the pleasure of it alone there were also prizes to be awarded so the post on August 8th shared the generous sponsors for these. They included @criswoodsews whose zero-waste Parasol dress pattern has proved extremely popular especially during this challenge. @lizhaywood3754 is also an advocate for zero-waste sewing and has published two books on the topic. @thatwendyward has a recently published book on sewing more sustainably (she chats with Maria about it on the podcast too!) Wendy has long been mindful on the topic after years of working in the RTW industry, as well as producing her own patterns, teaching and writing several other sewing books all of which feature older models! There were also prizes from small businesses @greyfriarsandgrace who create paper patterns which guide the user to sew clothes using recycled textiles, and @craftandthrift who sell thrifted fabrics and kits.
Jen returned with her second post sharing her use of ‘found’ fabrics, including a beautiful blouse made from a sheer vintage embroidered table cloth. Found fabrics can make you a lot more creative because you feel less constrained by what to make with them, do you find the cost of brand new fabric can stifle your creative instincts because of the fear of making costly errors?
One garment that offered massive chances to use up multiple fabrics was the ubiquitous tiered and ruffled dress-a buffet dress in current parlance! Followers have certainly embraced this style and the account shared just a small selection of them on August 11th.
Next up was Marcia @MarciaLoisRiddington who adores #GrannyChic and is a wonderful exponent of using vintage fabrics to great advantage and her combinations of colours and patterns is absolutely masterful (mistressful?)
Then @irenelundell from Sweden urged us to think about ‘circular’ sewing, buy from charity or thrift shops when you see it because not only does it support a good cause but it gives the textile or garment the chance of a new or extended life.
Tricia @morrissews who followed is a fine exponent of refashion, remake, remodel, recycle and repair…and try as much as possible to not replace. She shared her @Elbe_textiles (another prize sponsor) Sorrento bucket hat which couldn’t be more suitable for using up lots of small fabric scraps to make something really useful and wearable.
Jen’s third post demonstrated the times she’s used multiple garments to make a single new one, such as the three shirt shirt! Casual jackets which are made up of small pattern pieces are also ideal for a patchwork approach, there are even small businesses now making these commercially and every garment is different, some even manage to use 100% recycled components.
She talks too about the 90 minute transformation challenge on GBSB was actually a very liberating experience because there was no time to be overly precious with what they were given to use, it forced her to think outside the box very quickly and not have time for self-doubt.
There was another Jen up next, @jenlegg_teescreatives who told us how she has used textiles belonging to dear and much-missed friend and how, when she wears the jacket she’s sewn, it feels like a hug from her friend Emma. There are many other ways you can honour or remember a friend or loved one in this way too by sewing articles like soft toys, cushions, patchwork quilts or rugs for example using garments that once belonged to them.
Jen Hogg made her final return to tell us about using factory surplus in her making. She’s fortunate to live near a number of textile mills in Scotland and has been working closely with them to find inventive ways of using their ‘waste’ products. By using cashmere off-cuts, including something called ‘slitter’ which is a by-product of making cashmere scarves, so far Jen has knitted or crocheted rugs and blankets, and woven and stitched the strips together to make whole pieces of textile big enough to make into jackets, dresses or coats. Are there any textiles manufacturers or processors near you? Do they sell off any of their excess or by-products? It might be worth investigating. Another way of using up scraps which has been around for many many years is rag rugging (also known as proggy rugging) and @raggedlife has loads of ideas for this technique.
As the month was drawing to a close Raquel in Taipei @raquel_sewing_knitting_in_asia (who is an absolute Queen of refashioning!) showed us how she takes inspiration from high-end fashion and clothing all around her but then recreated the looks using multiple end-of-line garments and thrifted clothes. Not only that, she would wear them a few times but if they aren’t quite right she isn’t afraid to take them apart again and reconfigure them into a new garment more to her liking! Sometimes more than once! I’m always too precious with things I’ve made to do that even if I don’t much like the end result, instead they tend to sit on the naughty step while I sulk about what went wrong with them, I should just tackle it head on and take up that unpicker!
The final guest editor for the sewing sustainably month was Judy @judywillimentross whose speciality is refashioning mens suits into another wearable garment. She buys them in charity shops but one of her own rules is not a purchase a suit which might still be of use to someone less fortunate and not in a position to buy new. [This could also be something to be mindful of when purchasing any very inexpensive garment, should we consider whether it would be of use to another person as it is before we buy it to cut up. Or do we take the view that the money we pay for it is a donation to a charity in need of the cash, especially if it’s going to end up in landfill otherwise?] Judy carefully uses ever-smaller fabric scraps to piece together into patchwork.
So there you have it, loads of creativity to inspire us with our sewing projects in the future. By the time you read this the randomly-chosen winners of prizes will have been announced but the hashtag #so50SustainableSewing will continue to be used so the ideas bank will be constantly refreshed.
I’ve added links throughout so you should be able to see and read for yourselves what the guest editors had to say.
Judith and Sandy constantly add to the saved Highlights on the account too, particularly any one of the many worldwide challenges you might like to participate in, plus using some the dozens of hashtags unique to us will give you unlimited ideas for your own future projects.
For this post I’ve concentrated entirely on the sustainable sewing challenge and so I’ve not added many thoughts of my own. In truth, I wasn’t in the headspace to participate while it was going on but it did cause me to think about some of the projects I’ve completed in recent years which went some way to being ‘sustainable’.There are so many ways we can all do a little, or a lot, to contribute to reducing the problem of waste and over-consumption. We should be mindful that whatever is right and possible for one person though is not necessarily going to be achievable for another. For example, many of us can practice visible mending because we like that it gives longevity to a garment and can look attractive, but others will see it as a reminder of hard times or embarrassment. Our community is nothing if not supportive so we need to be mindful of others at times.
Did you know that linen jersey was even a thing? It’s an unusual fabric which you don’t see often, we all know knits are available in most other fibre types-cotton, wool, silk or man-mades for example- but I’ve never worked with it before so when Liana invited me to sew my next Lamazi project using it, and to pass on any hints and tips for sewing it, I was up for the challenge.
This 100% linen jersey comes from Mind the Maker in a range of colours and I picked the Dry Mustard shade which is a lovely vibrant ochre. The fabric has a beautiful lustrous sheen on the right side, the reverse is duller so it makes it much easier to tell the difference between the two. It has lovely light drapey quality too and is slightly sheer.
Linen fabric is not a textile known for its inherent stretch qualities and this jersey does feel slightly different from other knits because it has only a small amount of stretch along its length and quite a lot of stretch across the width but it has very little recovery so once it’s been stretched out it will stay like that at least until it’s washed again. During construction the application of plenty of steam will encourage some of this accidental stretching to be eased back into position so, coupled with its sheerness, this means that you need to think carefully about what garment to sew with it.
The properties of linen fabric itself [cool in warm weather, warm in cold weather] mean that it would be ideal for loose-fitting leisure or exercise wear, for yoga or Pilates for example. I would definitely say it’s better to avoid anything that is particularly close fitting because areas like the elbows or wrists would become stretched or baggy with little recovery. However the fabric has a lovely drape and its fine gauge allows it to be gathered up successfully so these properties could be exploited instead.
Bearing all these factors in mind I decided to make (another) Sewing Revival Heron dress which I would hack into a blouse. The pattern has a neckline which is gathered using elastic along with raglan sleeves with deep elasticated cuffs. To mix it up further I decided to pull the hemline in onto elastic rather than have a wide smock silhouette.
First things first, I washed the fabric by hand to remove any risk of excessive shrinkage or twisting in the machine. If you want to wash it in the machine then it might be an idea to overlock the cut ends together first to form a long loop and place it into a large washing bag to protect it further. Alternatively you could press it on your ironing board with plenty of steam instead. If at all possible it is better to dry the fabric flat, and certainly don’t wring or twist it. All of this might sound off-putting, and it is clearly not as straightforward as chucking a nice stable cotton into the machine but this is a luxurious fabric and deserves to be treated and handled carefully in the preparation. When it comes to cutting out your pattern pieces lay the fabric as flat as possible, handle it gently and don’t pull it about too much, especially if you decide to fold it. I made a whole back pattern piece for my top so that I could cut it flat, another appeal of the Heron pattern for me is that it has just three pieces so it’s a relatively quick sew usually.
After cutting all the pieces the first thing I did was stabilise all the raglan shoulder seams using some iron-on seam tape, I did this to prevent any unwanted stretching before I sewed the sleeves in later on. I added small squares of iron-on interfacing to reinforce the bottom of the opening on the centre front seam too. I also decided to press all the folded parts of the casings/ruffles for the neckline, sleeves and hem before sewing anything together, just so that I was handling the cut-out pieces as little as possible, again to prevent unwanted stretching before they got joined together. I also tacked these folded parts into position temporarily. All this might sound excessive but I wasn’t in a rush, and I found the slow and considered processes very soothing at quite a difficult time.
Something else I did before commencing was check on fabric scraps which needle and stitch-type would give me the best results. A ballpoint needle suitable for stretch/knits/jersey is essential to prevent snagging which could lead to laddering of this delicate fabric, and I found a short straight stitch was better than a narrow zigzag but you must do what works best on your own machine. You could sew a garment together entirely on an overlocker but be aware of the lack of rebound this fabric has so if it gets stretched or misshapen while it’s being sewn then it’s probably like that permanently. I also tested the overlocker finish before diving in for the same reasons. If you don’t have an overlocker this fabric is fine enough that where possible you could probably sew self-neatening French seams, or a wide zigzag might work but just be careful it doesn’t chew up the edges. If you have an overlock stitch option on your sewing machine and/or a special foot to sew an overlock-style stitch then definitely use them. Test all options before making your choice, the time taken could save you upsets later on. I slipped some folded strips of paper underneath the seam allowances when I pressed them to minimise any chance of the seam showing through on the front
If you have a walking foot for your machine this is definitely a fabric worth using it for, even if you don’t it’s a good idea to use plenty of pins. I’m not a fan of mini-clips because I think they are too heavy and get in the way, this fabric is lightweight and I think mini-clips could distort it while you’re sewing but it’s up to you. Tacking seams is always an option too of course, any technique that prevents the fabric shifting while you sew basically.
If you’ve followed my blog for a while you’ll know I’ve made a few Herons before so the construction was straightforward, the only area I did differently was to create the ruffled hem with a wide elastic casing. I couldn’t decide between my planned 2cms or 1cm wide elastic initially so I tested with the two widths to see which I preferred-I chose to stay with the 2cms width as planned.
To sum up, I’m really pleased with how my first experience of sewing with linen jersey has gone, I’ll admit I was a little nervous because Liana was putting her trust in me with an expensive fabric but taking the time to plan and test, and use my existing knowledge of working with knits definitely helped. Because of the sheerness of the fabric Lamazi also provided me with a metre of Atelier Brunette crepe viscose in Ochre to make a camisole to wear underneath, I used the Simone camisole and trousers pattern by Maven which is a very quick make and a very useful garment to wear on its own or underneath other garments. The crepe viscose is a beautiful quality fabric with lovely handle and drape but be aware that there’s a disappointing amount of creasing, you might want to take that into account when planning, for example if you’re making something you’ll spend a lot of time sitting in.
As always, I hope you find my hints and tips helpful if you choose this lovely fabric, I wouldn’t recommend it to a novice sewer because some experience of sewing with other similar fabrics is definitely an advantage, plus it would be shame to end up with a costly mistake, but if you’re looking for a new challenge to add to your repertoire this could be a good start. I’ll launder the finished garment either by hand or in a wash bag on a gentle cycle in the machine. I’ll dry it flat too and store it that way, I don’t want a coat hanger to make it misshapen. If you’re a person who prefers not to worry too much about their clothes or their maintenance then this might strike you as overkill, and that’s fair enough, but I don’t think it hurts to have a few special things in our wardrobes which were worth the effort to make for ourselves.
I’m looking forward to wearing this top as autumn is fast approaching (did summer ever arrive!?) thank you to Lamazi for providing me with the fabric to review.
There’s been quite a lull in my sewing and blogging of late due to a distinct lack of motivation and generally feeling meh about everything. I don’t know about you but I’m utterly cheesed off with the persistence of the ‘Rona and, whilst I really try to find the positives as much as I can, there comes a time when I’m all out of good thoughts.
Anyhoo, I’ve finally managed to get my act together and to cut out and sew something which is worth blogging about!
You’ll know I use The Sewing Revival patterns a lot, and especially because they are SewOver50-friendly in their representation. Janine kindly offered me a copy of the new and improved Kingfisher top recently so here are my thoughts on it. The original version was one of the first in the Sewing Revival collection and it now features extra variations including 3 sleeve lengths and additional ruffles and frills to gussy it up.
Initially I’d settled on using a length of fabric I bought recently but in the end, whilst searching-sorry-shopping, my stash I came across a length of batik-printed lightweight cotton which had originally been a dress. I bought it as a remnant which was in two different-sized pieces pieces so I joined them right across the weft to make it useable. From that I turned it into a simple ‘pillowcase’ dress with a gathered drawstring top and hemmed at the bottom. Needless to say, this being England, I didn’t get a massive amount of wear from it because our climate is so unreliable. Sadly I don’t seem to have a photo of it now so you’ll just have to believe me.
The Kingfisher has raglan sleeves which are always so nice to make because they are simple and quick to construct. One of The Sewing Revival’s trademarks is to mix a stretch neck band, cuffs or hem with a woven fabric and this top features a ribbed, rounded neck band. But first I had to get all the pieces out of a length of fabric with a join across it at about 50cms in, plus a tear at right angles to the selvedge in another place AND a small hole just near that! I calculated that I could get a pair of 3/4 length sleeves but one would have to have the seam running horizontally across it. Another new feature of the Kingfisher is additional small ruffles to add so, instead of placing them vertically on the sleeves, I opted to cover the seam with horizontal ruffles, that way way both sleeves would look the same. After a bit of pattern Tetris I got everything I needed out including the ruffles. I started by making the sleeves.
Because of the limitations of the fabric the ruffles were only 5cms wide so, in order to lose as little of their width as possible, I finished each edge with a rolled-hem finish on the overlocker. Check your instruction booklet because I’m sure many models will offer this feature, it will involve a few simple adjustments to the settings to achieve. A rolled hem is a quick and attractive way of neatening fine or lightweight fabrics when you can’t afford to lose too much off the edges.
I created a cuff to finish the sleeve ends by cutting two pieces of fabric from along the selvedge and sewing them on. My original plan was to create an elasticated cuff using a casing but then inspiration struck(!) and I sewed three rows of shirring instead.
Shirring works best on lighter-weight fabrics such as soft cotton-types [lawn, batiste, voile, Swiss Dot, pique, poplin if it isn’t too stiff] also most viscose/rayons, many silks, and fine woollens such as challis. This isn’t a definitive list by any means, basically nothing too thick, or stiff or overly ‘bouncy’. As with anything you’re unsure about I’d strongly suggest sewing a few samples first to see how it goes.
To begin (and these are very much my own thoughts on shirring, you will find many others which might vary to these-trial and error before you startis the best plan of action) you ideally need a bare minimum of 1.5x the eventual finished measurement but as a rule of thumb I would say at least 2 or 2.5x your finished measurement, especially if the fabric is very fine. I also wrote advice on shirring the back of a sundress in a previous blog post which you can still read here.
I cut this top in a UK10 so it’s a closer fit than some tops I’ve generally made but I’m really happy with the fit, there’s still ample room for comfort and movement. From a fabric that was languishing in a box I’ve concocted a casual top I can wear in warmer or cooler weather.
Thank you to Janine for providing me with the pattern, I hope my review will be helpful, for a such a simple shape there are so many possibilities with it. If you haven’t tried any Sewing Revival patterns I’d definitely suggest you pop over there and take a look, and if you choose to follow any link I’ve created in this post or previous TSR ones, and you then make a purchase, I will receive a modest fee from it. You can also read my previous reviews for the Sidewinder pants, the Heron dress plus a hack, the Bellbird top and the Fantail top and it’s follow-up. If you want any more inspiration use the hashtag #KingfisherTop on Instagram or Facebook. I’ve got plans for a deep-cuff version later in the year, just so long as I don’t have another creative slump…!
Welcome back and thanks for reading this far, I’ll try not to leave it so long next time!
In 2019 I decided to try something different to dresses from the Simple Sew pattern collection for my blog post so I chose the wide-legged Palazzo pants.
I always have a look at any posts or reviews about a particular Simple Sew pattern first to check if there are any pitfalls I should look out for which might influence my decision, or how I tackle making it, and the overall opinion of trousers was positive. I sorted out some fabric from deep in the stash, it’s a viscose from the now-defunct Adam Ross fabrics which has a good drapey quality, although I know it will crease so I’ll wear these permanently standing up!
There are only 4 pattern pieces to the trousers-front/back/waistband/pocket- which makes them very simple to lay up and cut out, you could even leave out the pockets if you’re short on fabric but why would you leave out pockets?!
I checked my measurements against the chart to decide my size, I also measured the pattern pieces to get some idea of the ease involved but I was optimistic they would be generally OK. If you’re very unsure, or between sizes, I’d suggest you make a toile that’s about mid-thigh in length to check the fit and comfort around your waist, hips and body length. Leave out the pockets at this stage, there are darts in the back and the front is flat, you could insert a zip in the back if it makes things easier to fit yourself but I didn’t bother. Always sew a toile as accurately as you would the garment itself because if you don’t bother cutting properly or following the seam allowances how will you know where the problems lie? That’s the whole point of a toile! Make any adjustments on the toile and transfer the changes to the pattern pieces. There are no lengthening/shortening lines marked on the midriff area of the pattern so I suggest, if you need to make either of these changes, drawing a line at a right angle to the grainline at a point midway between the waist and crotch level. Fold out or add in length through this line. There is a lengthening/shortening line for the leg length however.
It wouldn’t be a Simple Sew pattern if there weren’t some errors or anomalies to keep you on your toes and this is no different. On the back piece the pocket placement notches are only printed on size 8 and none of the others. Either transfer the markings to your size or remember to snip them when you’re cutting out the back.
The lay plan for cutting out shows the main pieces interlocking, which is fine if you have plain or multi-directional fabric but don’t forget to keep the pieces running the same way if you have a distinct one-way print. Also, I didn’t cut out the waistband until I was happy with the fit of my trousers as it’s very shaped piece and if it’s too big or too small you’ll probably need to cut another. Don’t forget to make a snip for the centre point on the waistband, it could have done with a notch for the side seam position though as there isn’t one so it’s a bit of guesswork.
I’m not normally an advocate of overlocking the edges until they’re sewn up [because if you aren’t careful you can easily lose too much seam allowance in the trimming and when you join pieces together you could start to make the garment too small, plus your notches disappear] but, as many of the pieces here require the seams pressed open and flat, I overlocked most pieces first this time.
You will find that for instructions 4 and 6 the words don’t match the diagrams but the drawings are correct
Next the pockets go in (unless you wish to check the waist/hip fit first in which case tack or machine baste the side seams and leave the back open where the zip will be inserted in order to try the trousers on) The description for the pocket insertion is a bit vague, I’ve made a second pair since writing this piece originally and found it quite unsatisfactory which is why I have updated my advice.
After I’d assessed the waist size (comfortable to loose) and crotch length (comfortable) at this point I cut and interfaced the corresponding waistband [for some reason there were two waistbands printed out but I could find no discernible difference between them so just ignore one and cut a pair in fabric plus one interfacing]
The reason the waistband goes on before the zip insertion is because the zip runs right up into the waistband to finish at the top, there’s no overlap allowed with button or hooks and eyes. You could use the overlap method if you prefer but you’ll need to add some extra length to the waistband on one end to allow for the overlap.
The lack of indication of the side seams on the waistband means you’ll need to pin carefully to evenly absorb any fullness of the trousers to ensure a good smooth fit to the waistband. [the side seam is probably at the halfway point but not necessarily, especially if you’ve made any fit adjustments to the waist]
With the benefit of hindsight I would make the waistband in two pieces, a front and two backs with the join at the side seam. This is for two reasons, first, it will allow you to make adjustments for fit more easily and, secondly, I’ve found the centre back has become slightly pointy and misshapen both times I’ve made these now. I believe this could be because the length and curve of the waistband means that it the centre back is very off grain, usually the centre back seam would be cut on the straight grain which gives it stability.
The instructions and illustrations for inserting the zip are reasonably clear however there seems to be a contradiction with an earlier instruction which tells you to sew up the back crotch seam. Illustrations 13-15 appear to have the CB seam unsewn and 16 tells you to sew it up after inserting the zip but previous diagram 6 tells you to sew it up! No wonder I got in a muddle!! My suggestion would be, if you’re using an invisible zip as suggested, leave the CB seam unsewn AND ignore instruction 11 to sew up the inseam until after you’ve inserted the zip. Alternatively, use your preferred method of inserting an invisible zip. Before sewing the waistband down I added two hanging tapes to each side seam so that I had an additional means to hang the trousers up if needs be.
On my second pair I’ve added a small button and loop inside the waistband because I found the zip a bit of a faff to do up without anything at the top of it.
Hopefully you’ve now arrived at a finished pair of trousers which simply need hemming. After checking the length wearing shoes (they come up pretty long) you could use the simple rolled hem finish as per the instructions or, as I did, leave a sizeable hem of about 5cms to give weight to the very flared leg width. I overlocked the edges to neaten and then used my blindhem stitch with the appropriate foot on the machine to finish [incidentally the photo is of a different project] I don’t use this technique often but it’s a good, and quick, finish on hems that don’t have too much, if any, curve. You could also slip hem by hand of course.
The Palazzo pants are worth persevering with as they have a pleasing smooth fit over the waist and hips which is very comfortable and the leg is wide without being crazy-big. You could shorten them to culotte length very easily, they would work well in a variety of fabrics including linen, chambray or crepe, fabrics with a bit of drape and fluidity will look nicest as you don’t want to look like Coco the Clown!
Overall I’m pleased with these trousers, they are a good fit and make a nice alternative to a skirt or close fitting trousers especially in warm weather.
I noticed that this particular post gets a huge amount of traffic so I hope this update clarifies any issues you might have had with the pattern. In fairness, it might have been updated and corrected since my copy was produced in which case you may be able to disregard some/all of what I’ve written!