Fantail follow-up!

I published my review of The Sewing Revival Fantail top recently and since then I’ve made a second using an alternative finish which I thought I would share with you.

the first Fantail top

This second version uses a ribbing finish on the neck, cuffs and back hem instead of hemming or elastication. I’d bought some Art Gallery viscose from Sew Me Something with an interesting graphic design and then my fellow @SewOver50er Kate @stitchmeayear generously offered me some grey ribbing, she had more than she needed. It turned out to be the perfect match and I couldn’t have planned it better if I tried.

There are separate pattern pieces for the ribbing cuffs, neck and hem and, although the same front, back and sleeve pieces are used, there are very slightly different cutting lines for the sleeve.

I had bought 1.5m of the graphic print and it has a fairly distinct one-way design which meant I needed to place each pattern piece carefully to try and get a reasonable match whilst not wasting too much fabric. I was able to do this by folding over one selvedge by just enough to position the front and back pieces along the same fold. This left a good sized piece from which I could individually position and cut a pair of sleeves whilst still just about getting a good match.

Sewing the Fantail with ribbing is very slightly different to the woven version. First, the deep ribbing band is sewn on the back in place of the narrow hem [I’m not sure if there’s a small discrepancy in the pattern or my cutting out but on both my versions I’ve found there to be about 5mm too much fabric in the back compared to the front when joining the side seams]

Like the first version I sewed the ribbing band onto the neck after joining the raglan seams and before sewing up the side seams. As I probably explained in the previous post, I always find it’s easier to put a facing, binding or whatever neck finish on whilst everything can still be laid out flat unless there’s a technical construction reason for doing it later.

The main reason for writing this second post is because I want to show you the way I turned the band at the hem-I forgot to take photos as I was making the first one! It’s a really neat way of of finishing the bottoms of the side seams and can be a useful technique in other places when you’re sewing different hems or edges together because it gives a crisp and level finish to an edge with the seams enclosed. The photos will help make more sense.

Pin the side seams together like so first, the raw edge of the deep elastic casing for the front is already pressed up by 1cm and the bottom of the ribbing is lined up against the notch for the casing.
Next, fold up the front so that it sandwiches the ribbing like this, pin in place. Now sew the seam starting at the fold on the hem. If you haven’t used this method before you may want to sew one side first and check it to make sure you’re happy with it, it can be a little confusing initially but it’s worth persevering.
Turn the hem to check it is level and, if you’re happy with it, neaten the seams however you wish. This is before I neatened the side seam but it will look like this on the inside.
The outside will look like this, so neat!

One other slight change I made was to the width of the ribbing cuffs, I cut the UK 12 pieces but they were much too baggy for my wrists so I shortened them by 5cms so they aren’t so wide and gapey.

At the moment I haven’t edge stitched any of the ribbing like I would do normally on knit garments. Because this is a combination of woven and knit fabrics I don’t want the woven fabric, at the neck especially, to end up puckered where its attached to the band so I’ve left it for now [and I don’t want holes if I had to unpick it]

The ribbing is currently not edge-stitched in case it causes puckering

I don’t normally post two of the same thing in such quick succession but I wanted to share the hem tip more than anything. I fully anticipate making a knit version of the Fantail at some point, or a short sleeve one in something really light and pretty…That’s what I enjoy about Sewing Revival patterns, so many possibilities if you have the imagination.

Until next time, Happy sewing

Sue

Fantail Top from The Sewing Revival

Janine at The Sewing Revival, the pattern company based in New Zealand, is gradually creating a growing collection of stylish patterns and there is something very appealing in their deceptive simplicity I think. I’ve made a few versions of several of them now, including the Sidewinder pants, the Bellbird top and the Heron dress.

When Janine kindly offered me my choice of the range to choose from I picked one of the more recent releases, the Fantail top. At first glance it appears to be a simple raglan-sleeved top but along with the high/low hemline and elasticated front hem it offers variations of scooped, ribbing or V neck, elasticated or ribbing cuffs, and the back hem can be finished with ribbing too.

I had a rummage in my stash for some suitable fabric, ideally something with a bit of drape works best so soft viscose, crepe, georgette or chiffon if you fancy a challenge, cotton lawn, wool challis or fine linen would all work very well. Light- or medium- weight jersey will make it into a very chic sweater. I’ve no idea where my piece of navy fabric came from, probably I was given it by an elderly lady because it had a little ticket pinned to one corner saying it was 1 1/2 yards x 54” wide and cost 90p! It certainly smelt a little bit musty so the first thing I did was give it a quick hand-wash, it turns out that the colour ran quite a bit and I was left with blue hands for several hours afterwards!!

The patterns are sold in size bands which each contain 4 sizes (there is some overlap between the brackets) and each band is layered which gives you the option to print only the sizes you want so I printed UK 10 and 12 because, having lost some weight recently, I wasn’t sure which size would be best. In the end I cut a UK12 and it looks fine I think, it’s a roomy style so I could possibly go down a size but as I’m one of life’s ‘fluctuaters’ where weight is concerned maybe I won’t.

I like the instructions on Sewing Revival patterns because they are well explained and illustrated with photographs. If you’re an experienced sewer like me then you won’t necessarily need to follow them closely all the time but I do keep half an eye on them so that I don’t miss a step or construct in the wrong order which might have repercussions later on.

I made the scoop-neck version with elasticated cuffs which is probably the most straightforward variant, the round neck is just the right amount in my view, not too wide, not too deep. Raglan sleeves are super-quick to construct, I usually sew the neck facing on after the shoulder seams and before sewing the under arm seams.

The front and back hems are very different lengths and finished differently so don’t rush through these elements. I ignored the suggested bias-binding finish on the back hem and used one of my favourite techniques of a pin-hem instead ( I wrote instructions for this last year in this blog post on hems )

The USP of this top is the deep partially-elasticated front hem. It looks great but it’s really not difficult to achieve. There are suggested lengths to cut your elastic for each size although you could use a shorter piece over the same length if you want to pull the front in a bit more. Or you could also use a narrower elastic but the pattern is cut for wide width like this so you may have to make an alteration to the hem depth accordingly for the channel to work.

This is the side seam where the two levels come together, make sure the back hem is fully enclosed within the front so there is a nice smooth line from front to back.
The finished top on the stand.
I sewed the deep elastic cuff version, there’s a subtle amount of gathering.

As I said, this is a simple top with eye-catching details, it’s probably a half-day project if you’re got everything you need when you start.

The sun came out so we headed out to the garden for photos. I’m wearing one of the pairs of Sidewinder pants I made in 2019, they are a bit baggy now.
There’s a nice dip to the hem at the back.

I’ve already got some fabric lined up for another Fantail hopefully very soon, a nice piece of soft viscose from Sew Me Something and ribbing given to me by my friend Kate which by sheer good fortune coordinates perfectly! There’s lots of possible variety with the Fantail, short sleeves is another for example. Incidentally, there is also a slightly different sleeveless version of the Fantail available too.

Until next time, Happy sewing

Sue

Box pleat shirt from Trend Patterns

I’ve made loads of different clothes over the decades but actual shirts for myself have not tended to be among them. I’m not sure why, possibly because I had to wear boring school shirts for years and years, and for a while I had to wear a uniform when I worked for the John Lewis Partnership so my personal preference has tended to softer blouse shapes. That said, I love to see a crisp white shirt especially when it’s given an inventive twist. It’s a wardrobe staple and yet there’s always room for a new version. 

Lucy at Trend Patterns has just released the first 3 patterns of what will become a shirt collection and each is available printed, as a PDF or as a complete kit with pattern, fabric and trims. TPCSH1 is a feminine Pussy bow top with shirt sleeves and a ruffle hem, TPCSH3 has stunning gathered ‘angel’ sleeves which really make a statement whilst the body is kept simple and traditional so that the sleeves do all the talking. 

Lucy offered me the kit of TPCSH2 to try out, it is a box-pleated front shirt, deceptively simple to look at but those details take a little time to get right. It’s classified as ‘moderate/hard’ and I would agree, not because the elements in themselves are especially difficult but each of them needs some experience and precision to execute so I wouldn’t recommend this as your first shirt project. 

The kit comes with enough good quality plain white cotton poplin to make up to the largest size of a UK 22, along with Trend-branded buttons (a nice touch) and iron-on interfacing. All you need to provide is your own thread! 

I started off by taking my measurements and comparing them to the sizing chart, there is also a chart giving you finished garment measurements too which is helpful because it will give you some idea of how oversized the shirt will be when it’s finished. I made a UK 12 and as you will see from the finished photos it’s a very generous fit, to be honest, if you want a close-fitting shirt then this particular pattern won’t be the one for you. 

I opted to trace off the pattern, there are two separate fronts, right and left, and a whole back plus sleeves, yoke, cuffs and collar. There is no pattern piece for the bias binding for the sleeve placket, you just need to cut yourself two bias strips approximately 30cms x 4cms. The right and left fronts are the same except for the extra on the centre front which creates the folded fly with concealed buttonholes. I traced off one front then, to save some time and to ensure they were identical, pinned it to more spot and cross paper before cutting them out together so that I had a mirror version with the additional front added. It’s really important to trace the front very carefully because of the three box pleats, if they are each a bit off you risk the pleats not sewing together accurately which will leave you scratching your head. There are a lot of drill holes to mark the stitching which will eventually hold the pleats in place, don’t be tempted to miss any out because they are also really helpful when you’re folding and pressing the pleats in position. You could choose to trace just half the back to save paper if you intend to always cut it on the fold anyway but having a whole piece gives you the option to have the fabric out flat, besides, it’s almost always more economical to cut fabric out as a single layer [this can be especially helpful if you ever need to do some tricky pattern placement or matching]

Because the fabric is plain, placing the pattern pieces and cutting out was a breeze-no pattern matching, yay! I spent quite a while making traditional tailor’s tacks for every single one of the drill holes. You could use a washable or some other kind of disappearing marker pen if you are confident that it definitely won’t come back to haunt you but I wasn’t going to take the risk on plain white fabric! 

In the past I’ve occasionally found some of the earlier Trend instructions a bit tricky to follow but the more recent ones have illustrations rather than photos and I found this set very clear. My biggest piece of advice would be to read then re-read the instructions before you start, and to highlight anything that you know you’re going to have to really concentrate on, this isn’t a race after all. 

Constructing the fly front and button stand first, including the buttonholes, was satisfying, I often feel like I’ve run out of steam by the end of any project which requires buttonholes and it’s a bit of a chore by then but this gets it out of the way nice and early. [I should add at this point that I started out sewing with a fine size 60 needle so as not to leave too many noticeable puncture holes in the plain fabric if I went wrong or needed to unpick. However, this size needle kept skipping stitches for some reason so I went up to a 70 and had no further problems]

transfer all markings and instructions to the paper pattern if you’re tracing it off. I made tailor’s tacks through every drill hole

My second piece of advice would be to press your pleats on the ironing board if you possibly can. I only have a small heat-resistant board in Threadquarters which meant I was constantly moving the fabric which was not ideal, it was so much easier on the ironing board because the whole piece fitted on. Do not rush this part, with pure cotton fabric you can have the iron on pretty hot but do be careful of your fingers with hot steam. Pin, tack or Wonder Tape the pleats in position once pressed if you want to. 

pressing the pleats on the ironing board, the snips top and bottom along with the tailor’s tacks will help you get each one in exactly the right place.
In progress-making the bar tacks

The instructions are to stitch down each pleat according to the markings using a few stitches. I did quite a lot of testing using a variety of decorative stitches for this before I committed to the bar tack. The next challenge was getting each of those bar tacks (30 in total!) central over the pleat. My machine comes with a number of feet which are used in conjunction with the decorative stitches and one of these has horizontal red lines which proved very helpful in getting lined up for every bar tack. After making a few of these bar tacks I ‘got my eye in’ so I could tell very quickly where to start each stitch, having the needle stopping in the up or down position is an absolute essential feature on my machine for me and it was brilliant during this, being able to lift the foot to check I was sewing in the correct place without the work shifting was so helpful. The photos will hopefully make my method clearer to follow. It’s vital to take your time and be as accurate as possible during this stage because the box-pleats are the USP of this shirt and it will obvious if they are off-kilter. I sewed in white thread but you could use a colour, or even hand embroider to give your shirt a totally original look.

testing various stitches including triple straight stitch and arrow heads, the difficulty was going to getting every single one central over the pleat

Incidentally, Trend will be creating a series of video tutorials to help so I suggest you check their Instagram account or the website for those. Also, there was a slight problem with pattern markings for the back box pleat which were incorrect. This has been rectified but if you bought a copy very soon after release you might find you have to scratch your head a little, the notches were in the wrong places. Check the website if you’re in any doubt.

the right front, including the fly, taking shape
the shirt with the side seams now sewn up, ready for the sleeves to go in
sewing the continuous binding to the sleeve opening. the instructions don’t call for it but I like to sew across the top of it at a 45 degree angle to encourage the binding to stay on the inside
close up of the finished front
all done
close up of the finished bar tacks

I followed the order of construction to complete the shirt (I usually do the first time I make a pattern) but personally I would put the collar on after making the yoke. I like to do it before the side seams are sewn up or the sleeves are inserted, unless there’s a technical reason not to obviously. 

the finished back yoke
I popped a bar tack in the middle of the back to hold the pleat in place, this hadn’t had a proper press yet

Everything came together really well, I’ve always found Trend patterns are accurately drafted so I know the pieces will go together well without major discrepancies-this is why it’s so important to trace off carefully if it’s your preferred method, if seams or notches don’t match up you won’t know where the fault lies [the same applies to accurate cutting out too] 

The sun came out so we could take some outdoor photos, I’ve paired the shirt with my much-worn Megan Nielsen Ash jeans
is it a bird? is it as plane?…
I’ve pressed the pleat now

Clearly not everyone will want to make a shirt that is going to take a sizeable amount of time to construct, or to launder afterwards for that matter, but if we only made simple loungewear for ever then the art and skill of making our own clothes will be lost, just at a time when so many people have discovered, or rediscovered, the joy of sewing for themselves. There will always be a place for a classic white shirt and Trend has created a small but growing collection with original twists on the genre. The last year has been so tough for small business owners so I really appreciate being given this kit to try out, I wasn’t under any obligation to review it other than share some photos but personally I have no problem with sewing and writing about it. I will always try to give you a balanced view and if I can support a little business by giving them some positive exposure then I will. Alongside that I’m keen to demonstrate that a design-led style doesn’t have to beyond us ‘ordinary’ sewers either, if you like it then sew it! 

I hope I’ve given you some idea of what will be involved in making the TPCSH2, if you’re looking to push your skills on a bit this could be a good project. Maybe you need/want a plain white shirt in your wardrobe [amazingly I didn’t have one in mine, just a couple of short-sleeved ones] I might layer this with a sleeveless tank top over it, or a waistcoat could look interesting. This is a typical cotton poplin shirting but you could use a variety of fabrics, you could have fun with graphic prints or stripes, try something soft like double gauze or a crisp linen? Or what about harvesting the fabric from several well-worn mens shirts to make a more patchwork look. Take your time though and enjoy the process.

I’ve got a long-sleeved T-shirt under it because it was a chilly day and it will be perfect for the day I can return to the V&A. I don’t know about you but I’ve really missed putting an outfit together to go on a nice day out, deciding which of the lovely garments I’ve made that I want to wear and how I’m going to accessorise them. It seems such a small silly thing to miss but I shall be so glad when I can start doing it again.

Most of all, thank you to Trend for giving me the opportunity to try the kit, until next time,

Happy Sewing

Sue

a new Lamazi blog, sewing menswear!

It’s a new year (apparently?) so it’s time for my next Lamazi blog and I’m sewing something for Mr Y! I don’t know about you but I’ve felt I needed to work on something a little different to most of my other recent makes, I’ve made myself some lovely garments that I’m now frustrated not to be able to wear much as I want but Tony has been in need of some new clothes for a while now so it’s his turn to be on the receiving end! 

I don’t know what you think but I’ve found that men’s wear patterns and suitable fabrics are definitely a bit harder to come by than women’s or children’s, they are out there if you’re prepared to look but it’s not easy. I’ve made him some nice shirts in the past which you can read about here, and I had made him a couple of Thread Theory Finlayson sweatshirts recently and then my good friend Claire told me about their Carmanah top which was quite a new pattern. It has several options so you can individualise it, for example with full length or quarter zip, hood or collar, and with or without kangaroo pockets. 

Lamazi offers a range of co-ordinating See You at Six fabrics with plain and patterned French terry, and ribbing, all dyed to be a perfect match so we chose the ‘Clouds’ design in Bistro Green. 

I’ve never purchased ribbing fabric before so I was unsure how much to buy, initially I requested far too much because the pattern instructions made no sense to me. Liana at Lamazi and fellow-blogger Sharlene advised me so I had 1metre in the end to be on the safe side and that was sufficient for an adult garment. If you find yourself in a similar situation I suggest you measure the appropriate pattern pieces to get an idea, or try contacting the fabric seller and I’m sure they would be happy to advise. For an adult garment it almost certainly needs joins whilst something for a child probably wouldn’t.

Based on T’s measurements (he’s 6’3” and, although he’s lost about 28lbs during lockdown, he’s not skinny) I cut him a size large but I added about 2cms at the CF and CB folds at the bottom because the previous version was just a little snug at that point. He likes the body length which comes down to about hip level, and the sleeves are nice and long too so I didn’t need to add any length to them. 

The making up instructions and diagrams are quite clear, I got into a bit of a pickle using the twill tape neatening method though, partly because I printed off the booklet a bit small so I couldn’t easily read the instructions(!) and partly because the green twill tape I had managed to buy was wider than required! Anyway, I persevered and it looks OK in the end. This tape method wasn’t essential and overlocking is perfectly satisfactory, I just thought I would try it for a nice finish on the inside, it definitely adds more complexity if you want to up-skill though. The collar version has a nice detail of the chin guard over the zip which is worth adding for a quality finish.

I put the twill tape on the wrong piece of collar initially! This is the outer collar and the tape should have been sewn to the inner collar. Incidentally, I added iron-on interfacing to the top collar to give it a little more body. It doesn’t call for it in the instructions but I felt the first version could have done with a bit more structure. Have a look at the photo below to see what I mean.
This first version was made with cable knit bought from 1st for Fabrics I think the collar is collapsing a bit although it’s not really a problem
I added twill tape to neaten the front edges before inserting the zip
I tacked the zip into the opening before topstitching in place.
second attempt at the tape trim! the tacking you can see is holding the fold at the top of the collar in the correct place until I’m ready to top stitch it later on.
The tape I bought was too wide so I sewed it on higher than the instructions and then trimmed away the excess in order to turn it up and sink stitch from the right side.
The finished collar from the inside. The green is a very difficult colour to photograph and the zip and tape are a slightly better match than they appear here. I bought both of those from Frumble Fabrics, they have a wide selection of all sorts of haberdashery that I haven’t seen elsewhere.
I finish overlocking by putting the threads on a large-eyed tapestry needle and slot it back through the stitching for a couple of centimetres like this which keeps it secure and tidy.

This fabric is quite pricey but, in my opinion, it’s really lovely quality and it sewed together beautifully. There’s just enough stretch and it would be a good weight for sweatpants or a sweater dress too if you’re tempted. This is the first time I’ve used a range of co-ordinating fabrics and the finished result is really pleasing. Equally you could mix and match colours or prints using remnants for this pattern too, because of the way it’s cut in segments, especially if you go for the full zip version. 

T has gallantly modelled the finished result-he’s delighted with it-he’s usually my slightly impatient photographer so the boot was on the other foot today!

Have you sewn anything for the men or boys in your life? How do they feel about it? Luckily T isn’t very demanding where his threads are concerned and he’s always been very happy with the items I’ve made him so far…..I haven’t attempted trousers in years though so perhaps that will be next? I’d interested in which patterns or fabrics for men you have been able to source, I think it’s an area for improvement in sewing terms.

Until next time, happy sewing

Sue

The Sewing Revival Heron dress hack

Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…

wearing the blouse on my trip to Paris for the Sewcial in May 2019
my very first version of the Heron dress…it has pockets!

While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.

All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.

Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.

Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.

I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.

And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.

I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.

I grabbed a cheeky selfie in John Lewis with my sewing friend Ruth in the autumn, we can only dream of when we can meet up again at the moment though sadly. that’s my upcycled jeans jacket I’m wearing

The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?

Until next time, happy sewing

Sue

2020-Sewing in a Time of Pandemic

Well what a year 2020 turned out to be!

It’s been such a tough time for so many and being a part of the wider sewing community has been a very real lifeline for many people. Those of us that enjoy making our own clothes already realise the obvious benefits this can give us; total freedom to choose types, colours and patterns of fabrics as we wish, the ability to emulate high-end or high street fashion at the price-point we can afford and the skill to make clothes fit our own particular body type, to name but a few. It shouldn’t then come as a surprise that the wider world, whilst searching for activities to entertain and occupy them during the long weeks and months of lockdown, discovered (or rediscovered) that home sewing can be creative, absorbing and rewarding which is a VERY GOOD THING! Who knew there was a link between doing a creative activity and a more balanced sense of well-being??

To be honest it doesn’t matter what that activity is, or whether you’re really any good at it, the fact that it can take your mind away to other less stressful places for a time is what matters.

But at the start of the year none of that was of much interest to most. I was extremely fortunate in January to go on a cruise to the Caribbean so I made a couple of new things to fills ‘gaps’ but mostly I took old favourites…cue multiple photos of 3 versions of The Maker’s Atelier Holiday shirt on heavy rotation! One new item was the Trend Square dress I made in fabric given to me by Dibs from Selvedges and Bolts the previous year, I got a lot more wear later on in the summer.

Within a couple of weeks of getting back, Judith Staley and I hosted the very first Sew Over 50 meet-up in London. We very much hoped, and expected, that it would be the start of many more such meet-ups between followers of the @SewOver50 account all over the world but it wasn’t to be…not yet anyway.

If you’ve been reading my blogs for a while you’ll know that as well as meeting up for sewcials with fellow sewers I really enjoy my visits to exhibitions and galleries. At the end of February I caught up with Janet Poole who is a fellow Lamazi blogger at the Stitch Festival in London, I had such a lovely day shopping and chatting with her, and her friend Great British Sewing Bee winner Juliet too. We didn’t realise it then but we were very fortunate to be able to attend the event at all and I wouldn’t be surprised if others who went didn’t catch the-virus-that-shall-not-be-named because it was so crowded.

About a week after this I was able to go to the stunning new Kimono show at the V&A and, although we didn’t know it at the time, that was to be the final outing for several months…

I wore the new Homer & Howells Cissy dress (and failed to remove my coat from shot which I chucked on the floor!)

So then we entered the first long lockdown and that’s when sewing (and some baking) became my primary occupation. During this time I had some blogging commitments for Simple Sew Patterns and Lamazi fabrics to complete. For my first Lamazi post I made a Trend patterns Bias T-shirt dress which was a tough make, not because the pattern was difficult but because I was making the dress for a wedding that never took place. And worse than that, I was making the Bride’s gown too so I still have an almost-finished dress waiting for the day that the wedding can happen.

In all honesty I hated how I looked in this dress because I had piled on weight and felt very self-conscious in a fitted dress. It was a lovely pattern made in beautiful fabric but I felt I was doing both a disservice. Eventually I did wear it in September by which time I had lost weight and it was a delight to wear! I’m sure I’m not the only one whose state of mind has fluctuated wildly this year and my self-confidence was rockbottom when this picture was taken.

I know I’m very blessed in that I have little to actually complain about in my life but that does not mean that these months of lockdown didn’t take their toll mentally so, when the call to help make scrubs came, it was something I could actually do! Eventually I made 10 sets, I believe they were headed to a maternity department in a London hospital.

I continued to keep busy by doing a few refashioning projects because the desire to make new things that weren’t going to be worn outside the house was just too depressing. I love the act of making clothes, the planning, the cutting out, the sewing, because that was taking my mind off what was happening in the real world but how could I justify making new clothes that I had little use for? Even dressmaking was starting to become a negative because I felt guilty about it. By doing some refashioning projects using things I already had, other than new fabric, I made a few items including pyjamas for my final Simple Sew post and another pair using the PJ pattern in the Great British Sewing Bee book written by Alex and Caroline of Selkie patterns and for which I had made a couple of samples. I used 4 old work shirts of my husband’s which were very well worn! I also made (eventually) two pouffes as well which took care of loads of scraps and off-cut furnishing fabrics and were extremely satisfying! I also refashioned a very old and redundant heavyweight cotton curtain into a Dawson coatigan by Thrifty Stitcher.

Early on in lockdown I had the pleasure of talking to Maria Theoharous for her Sew Organised Style podcast on a couple of occasions. I’ve set up a separate page so you can access this to be able to listen to her inspiring SewOver50 guests every week. One of our chats revolved around how we each arrive at our fabric choices for specific purposes or projects, I wrote this topic up as a post which you can read here, and I also wrote a further post which came from when I was guest editor on the @SewOver50 account and we talked about our cutting out processes-did we cut and make one thing at a time, or cut several things and have multiple projects on the go? Scissors or rotary cutter? Pins or weights? It was wide ranging and fascinating with so many excellent ideas and practices. I hosted another discussion about a variety of hem finishes later in the year and you can read that one here. Incidentally, by the end of this year @SewOver50 has reached an incredible 25,600 followers!!

One of my stranger tasks this year was to carry out a socially-distanced dress fitting on a doorstep! Before lockdown started I had been commissioned to make a dress for a work colleague of my daughter Katie. Thankfully I’d opted to make a toile of the bodice which I’d fitted just before lockdown kicked off so I managed to get the dress to a good stage of completion. However, I got to a point where I definitely needed her to try it on because even if she couldn’t wear it for the event she had hoped to, it would be nice for her to take delivery and wear it around the house!! So I went to their place of work and handed the dress over at arms length to Tracey to put on in the staff toilet, then she came out onto the porch where Katie, under my direction, pinned the dress for me. I took a few photos for reference too. From that I was able to finish and deliver the dress and my client was delighted with it…phew

One of the regular sewing highlights of the last 4 years for me has been the Sewing Weekender which generally takes place in Cambridge, UK in August. The organisers took the bold decision to put the whole event online instead which meant that many more people could ‘attend’ from all over the world. Myself and Judith Staley were delighted to be asked to contribute a video message each which was very nerve-racking but it turned out alright in the end. I published a transcript of mine here, along with the original video (you’ll notice that I had abandoned my signature pink hair by this time because, quite frankly, what was the point of bothering!) The Online Weekender also raised a significant amount of money which was divided between 4 charities. 

As lockdown started to ease in the summer I was able to get out and about a couple of times. I joined an al fresco rag-rugging workshop in Hertfordshire run by Elspeth Jackson of Ragged Life which was so enjoyable, and I visited a couple of exhibitions in London including the Kimono show again, plus Andy Warhol at Tate Modern and Tricia Guild at the Fashion and Textiles museum both on the same day. Since then though things have been shut down then reopened, then shut down again. My heart goes out to everyone who is trying to run a business or an organisation that relies on visitors through their doors to make them viable, their future is very uncertain.

I’ve made a few other garments during the autumn which I’ve been really pleased with including the Prada-inspired shirt dress and a pair of Utility pants by Trend Patterns (not blogged yet) but I feel I’ve run out of steam with my sewing right now and I never thought I’d say that. My own teaching classes restarted for a total of 5 weeks in October but they’ve stopped again. I know some have adapted by using Zoom or other platforms but it just wouldn’t work for me, I feel dressmaking is too hands-on and needs real assistance for tricky bits, holding things up to the camera isn’t good enough sometimes. And being part of a group and all that shared enjoyment is a huge part of it too. I’ve had fairly regular online catch-ups with some of my lovely sewing friends and that has been a joy, albeit not as good as seeing them in the flesh.

Mr Y was the lucky recipient of a few handmade garments too during 2020 when I made him another two Kwik Sew 3422 shirts, and not one but two Thread Theory Finlayson sweatshirts! I’m happy to say he’s delighted with all of them and I’ve got plans for another sweatshirt for him in the new year.

I’m working on my own pattern which I’ve self-drafted so hopefully that will be something positive for the new year but I need occasional assistance from more expert friends and that’s making it a drawn-out process which would have been so much more fun person-to-person.

One final project I was commissioned by a friend to make was a Christmas chasuble for her to wear as she presides over her Christmas services in church. A chasuble is essentially a fancy poncho which the priest wears over their other vestments and Wendy wanted me to create one with a Nativity scene on it. She sourced the base fabric with my advice, and a printed quilting cotton Nativity which was sent from the US. This was square so I carefully cut it into approximate thirds with the central third featuring the stable scene and the star for the front, another third with Bethlehem for the back and the remaining third I cut into two parts to use on the stole, which is the long scarf priests wear around their necks. All of these I attached by appliquéing around the black outlines (I was literally making it up as I went along!) Wendy is delighted with the finished result (thankfully) and I’m sure she will enjoy using them during the Christmas season.

As I finish writing this (2 days before Christmas) we have no idea what lies ahead…some countries seem to be slowly recovering whilst the UK as a whole seems to be sliding further and further into disaster, or maybe not? I should try to think more positively as scientists have worked tirelessly to make a vaccine which will gradually be rolled out. Personally I’m a long way down the list for it but that’s absolutely fine, we must protect the most vulnerable first.

I’m making an effort to look cheerful in this most recent Lamazi blog make, but the wine was slightly off watered down Rosé from my daughter’s fridge and it was 10.30 in the morning! I’m genuinely pleased with the dress though and in spite of everything I’ll wear it on Christmas Day because there’s plenty of room for expansion!!

This has probably ended up not being a-not-entirely-coherent post but that’s kind-of appropriate I reckon! Wherever you are and whatever the new year brings for all of us I’d like to thank so many of you for reading my posts, sending me lovely or encouraging messages. Being a part of the online sewing community and Sew Over 50 in particular has been an absolute joy and a lifeline at times. We need to lift each other up more often, call out injustices when we see them but not to the extent that it becomes bullying of individuals, that isn’t right either. 2020 has been a year of huge upheaval, I plan to restart 2021 with fresh sewing plans to help me to feel more positive about it…it’s going to be a bumpy ride!

Until next time, stay safe!

Sue

a multitasking Festive outfit

The Festive season is often a reason to make, or buy, a special new outfit to wear for office parties or Christmas Day but this year’s Festive season things will be very different for most of us. I don’t want to be entirely negative though so, as part of the Lamazi blogger team, I thought I’d make something which is a little bit Christmassy but will double up as a ‘regular’ winter dress too. 

I’ve chosen the cord velvet from Danish Design in a gorgeous shade of aubergine-I’m always a sucker for purple-but it comes in several other beautiful rich shades including a sumptuous gold and a stunning teal too. I picked this fabric because it’s a medium weight stretch jersey and has soft pile which makes it lovely to the touch. I’ve made a dress but you could easily make tops or wide-legged pants in it, or babies and children’s clothes too because it’s washable and crease resistant. 

Whilst I love a complex make to really get my teeth into I felt this wasn’t a garment which warranted lots of time. Making a special Christmas once-worn garment wasn’t appropriate any longer so I wanted something quite simple but adaptable and for that reason I’ve picked the Somerset T-shirt by Maven Patterns. I’ve made a few of these now, the bones of it are beautifully simple, it has a self-neatened bateau neckline, a slightly fitted silhouette and four sleeve options. I’ve chosen the Bishop sleeve with a long cuff but I’ve hacked the sleeve to make it even fuller, and I’ll lengthen the body to create a dress finishing below the knee.

Another idea was to add a flared skirt which looks nice but didn’t think I would use it as much as the straight version.

The Somerset has excellent very full instructions with lots of tips and advice to get a good finish. There’s a useful sheet to write all your information including body measurements and fit alterations, and a fabric stretch gauge to check you have enough stretch for the pattern to fit properly. You can also list the needle type and size you’ve used, stitch type and length and anything else you might want to remember for another time. 

To increase the size of the sleeves I took the bishop sleeve pattern and drew 5 vertical lines from each of the notches from shoulder to hem. Each segment will become slightly wider as it gets nearer the bottom edge so make sure they are even in size.

Cut a piece of spot and cross or tracing paper bigger than the pattern as it is, mark a grainline running right down the paper and then lay the pattern piece on top of it, matching the grain on the pattern to the grain line you’ve just drawn. Next, I carefully cut up to the top of the marked lines taking care not to snip right through at the top, keep it attached by a tiny amount to act as a pivot point. [If you don’t want to cut your original pattern piece I suggest you trace off a new one to use instead] Then you splay the hem edge apart by a few centimetres each, I added 2.5cms between the each of the ‘side’ segments and 5cms to the central one. By doing this you’re adding fullness at the hem but not altering the sleeve head. You could put additional fullness to the sleeve head by opening the top edge too if you wanted. I lengthened the sleeve by 5cms too so that it would have plenty of blousy fullness into the cuff. 

Trace around the new shape using a tracing wheel or pencil and cut out the new piece transferring all markings. One final change I made was to add a bias grainline because I knew I wanted to play with the stripe direction of the rib on the fabric.

I had pre-washed my fabric and partly tumble dried it on ‘low’ before letting it dry completely on the clothes airer, it seemed to survive the experience just fine. 

I made an arbitrary choice of how long to make the dress by simply holding the tape measure at my shoulder and seeing where it came to at about mid-shin! I attached another piece of spot and cross to the bottom of the front and back pattern pieces and drew on the skirt length I wanted, plus a generous hem. I knew I would have to make some adjustments to the hip and thigh during the fitting stage, just make sure that the hip and thigh measurements are plenty big enough because you can always remove some, it’s much harder to add later! 

The ‘cord’ runs across the width of the fabric and I wanted the rib to run down the length of my dress which meant I had to fold the fabric across the width. Try not to twist the fabric if you have to fold this way, I marked a single rib by following it across the width with pins so that I can see it clearly. Fabrics like corduroy, velvet or velour have a pile or ‘nap’ which will shade so if you cut some pieces facing one way on the grain and some pieces running the other way then you will end up with a garment that looks like it’s been made with two different colour fabrics, even though you know that isn’t the case. If you’re unsure what quantity of this type of fabric to buy go with the ‘with nap’ amount on the pattern information and follow the one-way layplan to cut out.

I marked the rib across the fabric with pins so that I could be sure it was folded correctly and would not be twisted.

Once I’d cut all my pieces I followed the making instructions which are very comprehensive. If you have a walking foot for your machine I strongly recommend you use it because velour like this has a ‘pile’ and has a tendency to ‘creep’ as you sew so you might find that it starts off with all the edges matching but by the time you get to the other end the two fabrics are no longer matching. I also strongly recommend you tack any seams you are unsure about. You could use a million pins but by the time you’ve done all that you could have basted it in place which does the same job and usually more effectively. I was able to coverstitch the neck and the skirt hem on the Pfaff Coverlock 3.0 I have on loan as a brand ambassador but it works just as well by overlocking the raw edges and twin-needle stitching them down, or zigzag and twin-needle, or two rows sewn singly if you don’t have a twin needle. When it comes to pressing a fabric like this, if you don’t have a special needle board (and few of us do) then you should press on the reverse at all times. You could place a towel on your pressing surface and lay the fabric on top so that the pile of the cloth is against the pile of the towel which will help protect it. Use a pressing cloth as well. These tips will also apply to regular corduroy or any non-stretch fabrics with a pile too.

The bell of the sleeve is gathered using shirring elastic which helps to retain some of the stretch required for the cuff. 

Once the sleeves were in I sewed up one side seam directly on the overlocker and then pinned the other side seam to fit myself. This was because I didn’t know if I’d need a split at the hem to be able to walk in the dress and I didn’t want to end up with loads of unpicking!

First I tried it right side out to get an idea of how it was fitting initially, then I turned it inside out to pin.

I looked at the fit in the mirror first of all and the sewn side seam was quite wavy, this could be cured by either adjusting the differential feed on the overlocker so that it doesn’t happen, or you could stitch the seam on the sewing machine and then overlock the edges [This is what I opted to do because I could see I had to take a fair bit off the side seams anyway to achieve a fit I was happy with] Then I put the dress on inside out in front of the mirror and pinned out the excess. I turned it right side out and tried it on again to check the fit, then finally sewed both side seams on the sewing machine, I used a ‘stretch’ needle, a ballpoint or jersey needle performs the same task. Either use a short straight stitch or a straightened out zigzag, make some samples to see which works best for your particular fabric. 

Now I tried it on the dress inside out to adjust the seams
I pinned out a fair bit of the side seams to give more shape through the waist and hips.
still Inside out
Finally I put the pinned dress back on the right way around to check I was happy with the fit before making the adjustments.

Lastly, the cuffs go on and the skirt is hemmed. 

And that’s pretty much it, it pops straight over the head so no tricky closures, because of the stretch it didn’t need a split, and that means there’s room for Christmas lunch and it won’t look like a dish rag after spending the afternoon curled up on the sofa watching Christmas telly!

cheers!
I’ve dressed it down with an ancient knitted gilet plus a wide belt, long boots and my much loved Alexander McQueen scarf
I love a scarf to keep my neck warm!
It could be the strangest of Christmases but let’s raise a glass to a much better 2021

I have to say that I’m really happy with this dress because it ticks all the boxes I wanted it to. It’s comfortable but it looks Christmassy, it looks great with opaque tights, heels and jewellery, but also with boots, a chunky belt, a roll neck top underneath for extra warmth or a cosy scarf…and did I mention it’s comfortable! #secretpyjamas It also has the advantage of rolling up and going in the corner of a bag or suitcase and coming back out again not needing a press. Bonus!!

If you have a favourite T-shirt pattern you could try lengthening it into a dress, Tilly and the Buttons Tabitha from Make it Simple does that. You could browse the SewOver50 post I wrote listing loads of go-to T-shirt patterns for inspiration, or maybe copy a RTW one you already have?

At 160cms the fabric is very wide so a little will go a long way, and because it’s so soft it would be lovely for children’s wear too. It needs a little bit of careful handling but a lot of that is in the ground work. Make sure you lay it up and cut it accurately to minimise unnecessary stretching or distortion (try to keep it flat on the table or lay it up on the floor) pin or tack the seams so they don’t move about and press carefully as you go and you should be fine. 

It’s been an incredibly tough year for so many and I wouldn’t blame you for not feeling like making anything new to wear. However, if crafting and creating bring you joy and respite then you could view it as a gift to yourself, and when you choose to buy from small companies like Lamazi and Maven then you are helping them too.

Thank you to Lamazi for providing me with the fabric for me to write my review, and I hope you find it helpful. 

Until next time, Happy sewing

Sue

A few hem finish suggestions-a Sew Over 50 topic

Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.

Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.

I’m beginning here with a faced hem…

This was the hem of the first Refashioners project I attempted. It was a jacket made from two pairs of my husband’s old jeans and because I wanted to use as much of the reclaimed fabric as possible I cut shaped facings for the lower edge. As you can see I also finished the edge with bias binding I made from offcuts of dress fabric.
The inside of the finished jacket looked like this. I understitched the lower edge of the facing to help it roll better and also slip-stitched it in various places including the seams and pocket bags to secure the facing without the stitching showing on the front.
This is also a much more shaped facing on the hem of Tilly and the Buttons Orla blouse. This can be a beautifully neat finish on a curve, it gives some ‘weight’ and crispness to the hem too and makes it less likely to curl upwards on blouses for example.
This Orla blouse was from 4 years ago, I like the exposed zip in the back too (the instructions for putting it in were excellent if I remember correctly)

The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.

Helpfully, my fabric had horizontal stripes, some opaque and some sheer so I started by placing the crin on the front of the fabric and lining it up with the bottom edge of an opaque stripe. It is stitched on very close to the edge being careful not to stretch the crin as I sew, it’s important it lies flat. By sewing the crin onto the right side of the fabric when you flip it to the inside the raw edge of your fabric is enclosed underneath. To be honest I was making up the method as I went along because my experience of this technique previously came from altering wedding dresses which used it so this isn’t foolproof. I would strongly advise you to try a few samples first so that you have the version which looks best for your particular garment. [the eagle eyed amongst you might notice in my photo that I’ve sewn the crin to the wrong side of the fabric! I obviously did it and photographed it before realising what I’d done. As this was four years ago I don’t have any other photo!]
Once the crin is turned up to the inside I slip-hemmed it by hand, it looks a bit messy on the inside because the black shows up but it’s absolutely fine on the right side.
the finished dress, it’s one of my favourites I’ve ever made, and it’s a partial-refashion too because the velvet bodice used to be a skirt!

If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.

The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.

Sew the binding on very close to the raw edge, this was a Simple Sew Lizzie dress
Here I made my own binding which is first sewn on with a 5mm seam allowance and then understitched which is what you see here. I made this Grainline Farrow dress for a magazine review
The hem is turned up and I’ve slipstitched it in place by hand.
This is the same technique with ready-made bias binding.
the finished skirt.
My final example is the little christening gown I made from a wedding dress.

If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.

This is one of my variations on the Camber Set
I roll-hemmed a straight strip of fabric here which I then pleated onto the sleeve using a fork!
I roll-hemmed a straight strip top and bottom and gathered it onto the sleeve here.
An extended length sleeve on the River pattern from Megan Nielsen, roll-hemmed and elasticated

I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.

Using strips of iron-on interfacing to stabilise the area where the cuffs fold up
This is felted-type woollen fabric where hand stitching is unlikely to show through but if you have a finer fabric I would make the interfacing strip wider so that I then caught the inter with my stitches and not the fabric itself. See the next photo to explain this better.
You can see the interfacing is above the hem line here and I’ve herringbone stitched it by hand. You can also see how I’ve created a chain link to anchor the lining to vent opening on the back of the skirt.
the hemming stitches aren’t visible from the outside using this technique.

For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.

If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.

Personally I always think the stitches show a bit too much no matter how hard I try to get them really tiny. It’s very easy to catch a bit too much fabric, or none at all! In truth I probably don’t practice enough!!
This Regatta dress from Alice & Co was an ideal application because the skirt has a straight, unshaped hem.

I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.

the binding is sewn on the inside first
the binding then flips to the outside to become visible.
This dress was made for the Simplicity pattern hacking challenge last year
Instead of the usual hem on this dress I created a casing which I threaded elastic through.

I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.

the hem from the inside
the finished hem from the outside.
the finished dress, I was off to a wedding!

The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.

Inside the hem the corners are mitred.

Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.

Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.

turn stitch and trim
make another narrow hem, stitch a second time on top of the first line. Press. There will only be one row of stitching visible on the outside.

If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.

attaching a band to the hem.
The finished dress (worn with walking shoes during lockdown!)

This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.

I put a piece of Stitch and Tear behind the fabric as I sewed.
It looked like this after I finished
It will look like this on the reverse.
gently pull away the backing and then carefully snip off the excess fabric up to the stitching line.
Eventually the hem looked like this, the sleeves are trimmed with Broderie Anglaise

I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…

I had some narrow strips of white cotton lawn lying around so I joined them to make a piece long enough to go around the whole hem.
I folded the strip lengthwise.
attach the strip to the hem, raw edges together.
I understitched it, plus there’s a band on the front which is what you can see folded over in order to enclose the facing eventually.
The band folds back to enclose the hem facing.
There’s a little bit of puckering on the reverse here but this is invisible from the front, a good press will sort that out.

To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.

Stitching the hem with the overlocked edge rolled to the inside.

This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.

the bias strips were applied right side to wrong side on the shorts hems.
the bias strip is on the inside at the moment
It is then turned up to the outside where I trimmed and stitched it with ricrac braid.

I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!

Until next time, Happy Sewing

Sue

Pfaff air threading and a Tesselate Tee!

There’s a lot going on in this post because I’m offering you my thoughts on not one product but three! 

So, a bit of background first…I used to be a keen runner but various injuries forced me to stop and then I never quite got started again. Fast forward at least 3 years and I’d gained weight which I wasn’t happy about, I felt sluggish and lacking in energy, I wanted to lose the weight for the good of my health and mental wellbeing. So, coming up to date, the return to running is going well (if cautiously…) and I’m losing some weight which in turn has inspired me to try making some of my own activewear. Fortunately for me Melissa Fehr of Fehrtrade has become a sewing friend of mine since first meeting her at the Sewing Weekender a few years ago and she generously offered me a copy of her Tesselate Tee pattern to try. I’d helped test her Rouleur leggings last year so I already had that pattern. Part of the beauty of Melissa’s patterns is that she gives you really comprehensive instructions to be able to sew activewear using just a regular sewing machine if you don’t own an overlocker. I’m in the fortunate position at the moment to be a Pfaff Brand Ambassador and I have their air-threading Admire Air 5000 on loan, along with a Coverlock 3.0 as well so this all seemed like the perfect opportunity to make some new running kit. 

Suitable activewear fabric is not something I have in my stash other than the scraps left from testing the Rouleur leggings so I had a little online search and came across Frumble fabrics. They have a good range of activewear fabrics at competitive prices as well as an impressive selection of suitable elastics and other trims or haberdashery you might need for this sort of project. I bought a metre of plain navy fabric and a metre of navy camouflage print, along with navy soft waistband elastic, some navy fold-over elastic and, finally, silicone grip elastic. [One point I should add here is that I decided not to pre-wash the fabric, this was based on my own knowledge and belief that synthetic fabrics are usually more colour-fast than natural fibres. I was wrong. The navy came off on my hands as I was making it up so as soon as I finished both garments they have been through the wash after all. I have alerted Frumble so I’m not saying anything here that I haven’t already fed back to them. Overall I’m pleased with the fabric quality and I learned my lesson-prewash even if you think it doesn’t need it!]

I opted to go for a medium size Tesselate top, Melissa has recently layered the pattern so now you only need to print off the size or sizes that you want, I wavered between small and medium according to my measurements. The small probably would have been fine but the medium gives me a little more room without the constant thought that I should be sucking in my wobbly bits! One of Melissa’s USP’s with her patterns is interesting seam lines which means, as well as striking designs, you can often use up small pieces or remnants of suitable fabrics. The Tesselate has a variety of options including short or long sleeves, thumb cuffs, a hood (with ponytail hole!) and back zipped pocket. 

I cut the leggings a mixture between small and medium and I’m happy with the fit of the end result. I had enough fabric for long sleeves on my Tesselate and, although there’s a pattern for the back pocket, rather than print it off I made my own. 

I opted to put the pocket in the back left diagonal seam because I decided I could reach it comfortably behind me and use the zip easily whilst moving if necessary. I drew onto the pattern how big it needed to be to accommodate the essentials.
I placed spot and cross paper over the top and traced off the shape, adding 1cm seam allowance to it.
a new pocket bag labelled and ready

I played around with the fabrics until I was happy with their placement, I had enough of the blue spotty fabric for the back and front side panels, everything else I divided between the two navy fabrics.

Because I was going to be sewing a fair bit of the garments together directly with the overlocker I join the pieces with the pins at least 2-3cms away from, and parallel to, the cut edge. Then it’s safe to sew without the pins being anywhere near the blade.

I’ve made another little video to demonstrate how the air threading works on the Pfaff, you’ll need to bear in mind that it might seem like it takes a while to thread and so where is the advantage in air threading but that’s because I’m trying to explain as I go and I was sitting at a funny angle behind the camera whilst I did it.

After two years of owning the Quilt Ambition 2.0 (now discontinued) I’m used to the quality of Pfaff machines so it doesn’t surprise me that the Air Admire is sturdy (no shifting about on the table while you sew) and very speedy, with a superb quality of stitch. It doesn’t take long to get to grips with the air threading and, as I mention in the video, there’s an automatic threader for both needles too! I couldn’t get the hang of that at all to start with but it’s amazing what a difference it makes if you read the instructions and follow them! Of course, this is an expensive machine and I understand that not everyone will have that kind of budget but if you are considering an air threading overlocker (there are now a lot more models on the market than just market-leader Babylock with prices gradually coming down) then this one is most definitely worth thinking about.

I inserted the invisible zip on the sewing machine, then attached the pocket bag that way too. The T-shirt goes together pretty quickly considering the number of pieces-most pieces are cut singly because they are asymmetric-if you’re using the same fabric throughout it would be an idea to label your pieces in some way so you don’t get them mixed up.

I find it very useful having a variety of stitches to choose from especially when sewing with stretch fabrics, the 3-step zig zag was ideal when I was sewing the elastic into the waistband, I also have an ‘elastic’ stitch which is useful. A lot of machines, even quite simple ones, will probably have a stitch option which will enable you to sew activewear so why not try out a few of them to see exactly what they are, the instruction book should be helpful, or there’s so much information on the internet too.

The finished waistband on the leggings, elastic is completely enclosed in a seam at the top and then I’ve secured it further with a 3-step zig zag stitch
I’ve joined the elastic for the legs into loops which are then sewn to the right side of the fabric, matching the edge of the elastic to the cut edge of the fabric.
I used a small zig zag to stitch it in place. This then flips to the inside and I coverstitched it along the top edge.

To neaten the hems and around the neck I swapped over to the Coverlock 3.0 which I had on the coverstitch setting. Again, this is a very sturdy piece of kit with excellent stitch quality, I am finding there is a certain knack to using it and I’m by no means an expert yet but it certainly gives a very professional finish to knit, jersey or stretch garments.

The Rouleur leggings also have large side pockets which are perfect for holding your phone and/or keys etc (Betsy getting in on the act again too)

As always, I hope you’ve found this helpful, I always try to be honest about how I get on with a product whether or not I’ve been gifted, loaned or purchased it-all three in this case. If you’re tempted to have a go at activewear then Melissa is a good place to start-she’s even written a book on the subject so you’re in good hands!

Until next time, happy sewing

Sue

Dawson Coatigan by Thrifty Stitcher

I followed the progress of this pattern with interest on Instagram when it was originally released nearly two years, it was fascinating to see how Claire-Louise Hardie (the Thrifty Stitcher!) developed and finessed the various elements of it as she sampled it, up to the point that she was ready to release it for sale. It has attractive style lines with princess seams in the front which curve into hip pockets, the back also has princess seams and there’s a horizontal seam just below the natural waist. The collar curves up smoothly against the neck and the back collar has a ‘sunray’ of five darts spreading out towards the shoulder blades which I particularly like. The cuffs each have 3 similar darts, the details on this pattern has simple but so stylish.

My copy is a paper pattern but it’s now a PDF available from CL’s own website.

This post was originally published last year by Minerva who generously provided me with a nice firm Ponte Roma in a plain navy to make the Dawson in, it would also work very well in a boiled wool, felted wool, Melton, not a loose tweed though as they can start to fray and you’d lose the details too much in the weave. Anything fairly structured and stable would effectively show off the style lines. You could get some interesting effects with checks or stripes if you want a challenge! I’d wanted to make another version for a while because I’ve had really good use from the navy one, I hadn’t got around to finding any specific fabric for it but then I hit upon the idea of using a single old heavyweight cotton curtain that used to keep the drafts out by our front door. It had long been replaced for this task but I just had it folded up underneath the heat-reflective mat that I use on my cutting table. In order to maximise the fabric in the curtain I undid the deep hem and the sides, and removed the tabs at the top. I gave it a wash to clean it but also to, hopefully, stop it shrinking later on.

Areas like the pocket edges and the neck need stabilising with some iron-on tape or strips of interfacing as per the instructions, especially if you use a knit fabric like Ponte. I would recommend stabilising the shoulders with seam tape or scraps of ribbon to prevent stretching too. I used a specific needle for stretch fabrics and you could use the ‘lightening’ stitch to sew with if your machine has it, or a very straightened out zigzag. If you do use boiled wool the layers could be quite thick, use a straight stitch but you may need to lengthen it a little more than usual.

The pattern comes in eight sizes which are not numbered in the conventional way, CL opts for letters instead, so you work from your own body measurements to choose which size should fit you. I cut and sewed a size F originally which was quite generous, for the newer version I’ve cut the next size down. I misjudged how generous the ease is in the garment so I usually wear the Ponte version layered up over jumpers or sweaters on warmer cool days if that makes sense. At the end of the day it’s intended as a casual coat so don’t make it too small as you’ll always be pulling it closed across you. The sleeves are nice and roomy too, I’ve noticed some coat/jacket patterns can be a bit snug around the bicep for me which is a bit dispiriting, I’m hardly a muscle-bound hulk! Just check before cutting out if you’re happy with the sleeve length too, I probably could have added just 3-4cms because it feels the tiniest bit short on me.

The pattern goes together beautifully and all that tweaking in the sampling stage is borne out in the final version. I found the instructions pretty clear, they are mostly photographs and there are some really useful hints and tips which will come in very handy if you aren’t that experienced in your dressmaking yet. Make sure you transfer your markings for the pocket pivot point for example so that you get a crisp finish for the corners.

You could top stitch all the darts down, possibly in a contrast thread if you like, but because the Ponte had a slight stretch I didn’t do this on mine. I did top stitch down the front facings though and caught them down in a couple of places on the inside to stop them flapping. 

For the ochre version I topstitched more of the seams, I confess that I was incredibly slovenly and used up various threads in my collection so not all the stitching is the same colour…oops! Incidentally I didn’t use top stitch thread, instead I used the triple straight stitch which looks very similar although it is quite thread-hungry (hence the non-matching!)

This time however I didn’t top stitch the front facings down, I adopted a different approach. As it’s an unlined coat so all the innards are visible I used some ribbon to anchor the facing down in a couple of places. I chose to do this because I know from experience that when you’re sewing through several thick layers the triple stitch (which is a set length on my Pfaff and not adjustable) it can lead to puckering which doesn’t look so nice. Try a sample before you go ahead if you aren’t sure, that’s a LOT of slow unpicking if you don’t like it after all.

ribbon tabs between the facing and the pocket bag stop the facing from flapping about too much
You can see from this shot where I’ve placed the ribbon anchors.

I finished the hem by hand using a herringbone stitch rather than machining it for the same reason that I didn’t top stitch the front facings.

I think the Dawson is a well-drafted and executed pattern from an independent designer (and CL’s art work features herself so it squeaks into the #so50visible category!) The Minerva Ponte Roma works well for the soft tailoring, using my old curtain gives the slightly cocoon-shape a little more definition. It shouldn’t be too difficult to do an FBA if you need to either. I’m much happier with the fit of the ochre one, but I love the navy and will still wear it regularly too.

cheer up love!

Because the Dawson is a loose cocoon shape it would make a beautiful evening coat in a glamorous brocade, to go over the top of your evening outfit, denim would look great too (Have a look at my Simple Sew Cocoon jacket in denim here)

I guess this was also a useful exercise in upcycling, the curtain was years old and not being used for it’s original purpose so I thought why not give this a try. If I found I wasn’t mad about wearing the colour after all I know it’s 100% cotton so it would dye, I might come unstuck with the polyester sewing thread though which would take up the colour differently-it’s hardly Saville Row standard though! The Dawson took barely two metres of fabric (the front facing is helpfully cut in two parts which helps reduce the fabric usage, and of course you could always use a contrast fabric anyway) it doesn’t instruct you to use interfacing on any of the collar or facing parts but I did, just to stabilise the fabric a bit.

Until next time, Happy sewing

Sue