My latest Minerva make-Tilly’s Tabitha T-shirt dress

I seem to be constantly attracted to teal/turquoise/duck egg shades recently so this Art Gallery organic cotton jersey for my recent Minerva post looked perfect when it hoved into my field of vision! 

I’ve used Art Gallery knit fabrics in the past and the designs and fabric, whilst fairly pricey, are lovely quality. This particular jersey is an organic cotton (with a little Elastane) and very soft, a lighter weight than many so it would be good for children’s and babies clothing as well as adults. I love the print, I think it’s a vaguely ‘Tribal-esque’ graphic stripe and I quickly decided to make a Tabitha T-shirt from Tilly and the Buttons book ‘Make it Simple’ which I’ve made a few times before but to try out the dress hack version for a change this time. 

I traced off a new copy of the pattern using the horizontal lines indicated across the bodice specifically for the dress. I’m not long in the body but I thought it looked a little short so I added an extra 2cms to the bodice length. In truth I probably could have added more than that because I feel there isn’t as much blousing at the waist as there seems to be in the photo in the book [If you know, or suspect, you have a long body length then pay close attention to this before cutting your fabric, get someone to take your nape to waist measurement and compare it to the back pattern piece. If necessary then add any extra through the horizontal ‘lengthen/shorten’ lines, and don’t forget to do the front as well!] If you’re wondering why this matters, it will mean that the waist seam sits too high above your natural waist and could look more like Empire line. 

I followed the instructions in the book to draft my own skirt pattern which was simple enough, you only need one because the front and back are identical (you’ll need a decent sized piece of paper to do this) I cut the new front and back as complete pieces so that I didn’t have to cut anything on the fold, I also wanted a short sleeve so I traced one off. 

The fabric was a little bit curly at the edges so I took my time cutting out, be careful not to pull or drag the fabric at this stage because this could result in twisting of the finished garment. It’s helpful to mark stripes onto the pattern so that you can then match them to corresponding seams more easily. Cutting a single layer of fabric can really help make this more straightforward, and be less wasteful too.

Moving on, the suggestion for the waist casing is to use eyelets or buttonholes. I used a small round-ended buttonhole, whichever method you choose make sure you interface underneath first to stabilise the fabric. I used the quilting guide to help me sew an accurate 2cms seam to create casing. Once I’d sewn it I used a bodkin to thread the ribbon through.

Tiny round-ended buttonholes instead of eyelets
Using the quilting guide to sew an accurate 2cms seam to create the channel
I used a bodkin to thread the ribbon through, this was some tape I used initially until I got the better-matching teal grosgrain ribbon.

The rest of the construction was pretty quick because I already knew the T-shirt in size 5 was a nice fit, the skirt was a bit ‘hippy’ though so I took some off in that area. Following the drafting instructions the pattern piece is shaped for the waist but, for me, a straight rectangle would suffice.

The length was educated guesswork but I’m very happy with it and it’s not too restrictive at the hem, any longer or narrower and the skirt might need a split in it to allow movement. I have the advantage of using a Pfaff coverstitch machine to hem the sleeves and skirt but a twin needle or a zig-zag stitch will do the job too, and don’t forget to use a ballpoint or jersey needle. I used a narrow grosgrain ribbon in a toning teal to slot through the waist casing to complete the dress. As I mentioned near the beginning I might add just a little more length to the bodice next time but otherwise I’m really pleased with this Tabitha dress, it will be comfortable to wear for everyday and easy to roll up in a suitcase if I ever get to go on holiday again!

not keen to reveal pasty white legs!

Minerva provided me with this lovely fabric to write about, I’m delighted with the quality and I’m especially happy with the dress which is so just comfortable.

Until next time, happy sewing

Sue

The Sewing Revival Heron dress hack

Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…

wearing the blouse on my trip to Paris for the Sewcial in May 2019
my very first version of the Heron dress…it has pockets!

While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.

All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.

Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.

Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.

I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.

And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.

I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.

I grabbed a cheeky selfie in John Lewis with my sewing friend Ruth in the autumn, we can only dream of when we can meet up again at the moment though sadly. that’s my upcycled jeans jacket I’m wearing

The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?

Until next time, happy sewing

Sue

2020-Sewing in a Time of Pandemic

Well what a year 2020 turned out to be!

It’s been such a tough time for so many and being a part of the wider sewing community has been a very real lifeline for many people. Those of us that enjoy making our own clothes already realise the obvious benefits this can give us; total freedom to choose types, colours and patterns of fabrics as we wish, the ability to emulate high-end or high street fashion at the price-point we can afford and the skill to make clothes fit our own particular body type, to name but a few. It shouldn’t then come as a surprise that the wider world, whilst searching for activities to entertain and occupy them during the long weeks and months of lockdown, discovered (or rediscovered) that home sewing can be creative, absorbing and rewarding which is a VERY GOOD THING! Who knew there was a link between doing a creative activity and a more balanced sense of well-being??

To be honest it doesn’t matter what that activity is, or whether you’re really any good at it, the fact that it can take your mind away to other less stressful places for a time is what matters.

But at the start of the year none of that was of much interest to most. I was extremely fortunate in January to go on a cruise to the Caribbean so I made a couple of new things to fills ‘gaps’ but mostly I took old favourites…cue multiple photos of 3 versions of The Maker’s Atelier Holiday shirt on heavy rotation! One new item was the Trend Square dress I made in fabric given to me by Dibs from Selvedges and Bolts the previous year, I got a lot more wear later on in the summer.

Within a couple of weeks of getting back, Judith Staley and I hosted the very first Sew Over 50 meet-up in London. We very much hoped, and expected, that it would be the start of many more such meet-ups between followers of the @SewOver50 account all over the world but it wasn’t to be…not yet anyway.

If you’ve been reading my blogs for a while you’ll know that as well as meeting up for sewcials with fellow sewers I really enjoy my visits to exhibitions and galleries. At the end of February I caught up with Janet Poole who is a fellow Lamazi blogger at the Stitch Festival in London, I had such a lovely day shopping and chatting with her, and her friend Great British Sewing Bee winner Juliet too. We didn’t realise it then but we were very fortunate to be able to attend the event at all and I wouldn’t be surprised if others who went didn’t catch the-virus-that-shall-not-be-named because it was so crowded.

About a week after this I was able to go to the stunning new Kimono show at the V&A and, although we didn’t know it at the time, that was to be the final outing for several months…

I wore the new Homer & Howells Cissy dress (and failed to remove my coat from shot which I chucked on the floor!)

So then we entered the first long lockdown and that’s when sewing (and some baking) became my primary occupation. During this time I had some blogging commitments for Simple Sew Patterns and Lamazi fabrics to complete. For my first Lamazi post I made a Trend patterns Bias T-shirt dress which was a tough make, not because the pattern was difficult but because I was making the dress for a wedding that never took place. And worse than that, I was making the Bride’s gown too so I still have an almost-finished dress waiting for the day that the wedding can happen.

In all honesty I hated how I looked in this dress because I had piled on weight and felt very self-conscious in a fitted dress. It was a lovely pattern made in beautiful fabric but I felt I was doing both a disservice. Eventually I did wear it in September by which time I had lost weight and it was a delight to wear! I’m sure I’m not the only one whose state of mind has fluctuated wildly this year and my self-confidence was rockbottom when this picture was taken.

I know I’m very blessed in that I have little to actually complain about in my life but that does not mean that these months of lockdown didn’t take their toll mentally so, when the call to help make scrubs came, it was something I could actually do! Eventually I made 10 sets, I believe they were headed to a maternity department in a London hospital.

I continued to keep busy by doing a few refashioning projects because the desire to make new things that weren’t going to be worn outside the house was just too depressing. I love the act of making clothes, the planning, the cutting out, the sewing, because that was taking my mind off what was happening in the real world but how could I justify making new clothes that I had little use for? Even dressmaking was starting to become a negative because I felt guilty about it. By doing some refashioning projects using things I already had, other than new fabric, I made a few items including pyjamas for my final Simple Sew post and another pair using the PJ pattern in the Great British Sewing Bee book written by Alex and Caroline of Selkie patterns and for which I had made a couple of samples. I used 4 old work shirts of my husband’s which were very well worn! I also made (eventually) two pouffes as well which took care of loads of scraps and off-cut furnishing fabrics and were extremely satisfying! I also refashioned a very old and redundant heavyweight cotton curtain into a Dawson coatigan by Thrifty Stitcher.

Early on in lockdown I had the pleasure of talking to Maria Theoharous for her Sew Organised Style podcast on a couple of occasions. I’ve set up a separate page so you can access this to be able to listen to her inspiring SewOver50 guests every week. One of our chats revolved around how we each arrive at our fabric choices for specific purposes or projects, I wrote this topic up as a post which you can read here, and I also wrote a further post which came from when I was guest editor on the @SewOver50 account and we talked about our cutting out processes-did we cut and make one thing at a time, or cut several things and have multiple projects on the go? Scissors or rotary cutter? Pins or weights? It was wide ranging and fascinating with so many excellent ideas and practices. I hosted another discussion about a variety of hem finishes later in the year and you can read that one here. Incidentally, by the end of this year @SewOver50 has reached an incredible 25,600 followers!!

One of my stranger tasks this year was to carry out a socially-distanced dress fitting on a doorstep! Before lockdown started I had been commissioned to make a dress for a work colleague of my daughter Katie. Thankfully I’d opted to make a toile of the bodice which I’d fitted just before lockdown kicked off so I managed to get the dress to a good stage of completion. However, I got to a point where I definitely needed her to try it on because even if she couldn’t wear it for the event she had hoped to, it would be nice for her to take delivery and wear it around the house!! So I went to their place of work and handed the dress over at arms length to Tracey to put on in the staff toilet, then she came out onto the porch where Katie, under my direction, pinned the dress for me. I took a few photos for reference too. From that I was able to finish and deliver the dress and my client was delighted with it…phew

One of the regular sewing highlights of the last 4 years for me has been the Sewing Weekender which generally takes place in Cambridge, UK in August. The organisers took the bold decision to put the whole event online instead which meant that many more people could ‘attend’ from all over the world. Myself and Judith Staley were delighted to be asked to contribute a video message each which was very nerve-racking but it turned out alright in the end. I published a transcript of mine here, along with the original video (you’ll notice that I had abandoned my signature pink hair by this time because, quite frankly, what was the point of bothering!) The Online Weekender also raised a significant amount of money which was divided between 4 charities. 

As lockdown started to ease in the summer I was able to get out and about a couple of times. I joined an al fresco rag-rugging workshop in Hertfordshire run by Elspeth Jackson of Ragged Life which was so enjoyable, and I visited a couple of exhibitions in London including the Kimono show again, plus Andy Warhol at Tate Modern and Tricia Guild at the Fashion and Textiles museum both on the same day. Since then though things have been shut down then reopened, then shut down again. My heart goes out to everyone who is trying to run a business or an organisation that relies on visitors through their doors to make them viable, their future is very uncertain.

I’ve made a few other garments during the autumn which I’ve been really pleased with including the Prada-inspired shirt dress and a pair of Utility pants by Trend Patterns (not blogged yet) but I feel I’ve run out of steam with my sewing right now and I never thought I’d say that. My own teaching classes restarted for a total of 5 weeks in October but they’ve stopped again. I know some have adapted by using Zoom or other platforms but it just wouldn’t work for me, I feel dressmaking is too hands-on and needs real assistance for tricky bits, holding things up to the camera isn’t good enough sometimes. And being part of a group and all that shared enjoyment is a huge part of it too. I’ve had fairly regular online catch-ups with some of my lovely sewing friends and that has been a joy, albeit not as good as seeing them in the flesh.

Mr Y was the lucky recipient of a few handmade garments too during 2020 when I made him another two Kwik Sew 3422 shirts, and not one but two Thread Theory Finlayson sweatshirts! I’m happy to say he’s delighted with all of them and I’ve got plans for another sweatshirt for him in the new year.

I’m working on my own pattern which I’ve self-drafted so hopefully that will be something positive for the new year but I need occasional assistance from more expert friends and that’s making it a drawn-out process which would have been so much more fun person-to-person.

One final project I was commissioned by a friend to make was a Christmas chasuble for her to wear as she presides over her Christmas services in church. A chasuble is essentially a fancy poncho which the priest wears over their other vestments and Wendy wanted me to create one with a Nativity scene on it. She sourced the base fabric with my advice, and a printed quilting cotton Nativity which was sent from the US. This was square so I carefully cut it into approximate thirds with the central third featuring the stable scene and the star for the front, another third with Bethlehem for the back and the remaining third I cut into two parts to use on the stole, which is the long scarf priests wear around their necks. All of these I attached by appliquéing around the black outlines (I was literally making it up as I went along!) Wendy is delighted with the finished result (thankfully) and I’m sure she will enjoy using them during the Christmas season.

As I finish writing this (2 days before Christmas) we have no idea what lies ahead…some countries seem to be slowly recovering whilst the UK as a whole seems to be sliding further and further into disaster, or maybe not? I should try to think more positively as scientists have worked tirelessly to make a vaccine which will gradually be rolled out. Personally I’m a long way down the list for it but that’s absolutely fine, we must protect the most vulnerable first.

I’m making an effort to look cheerful in this most recent Lamazi blog make, but the wine was slightly off watered down Rosé from my daughter’s fridge and it was 10.30 in the morning! I’m genuinely pleased with the dress though and in spite of everything I’ll wear it on Christmas Day because there’s plenty of room for expansion!!

This has probably ended up not being a-not-entirely-coherent post but that’s kind-of appropriate I reckon! Wherever you are and whatever the new year brings for all of us I’d like to thank so many of you for reading my posts, sending me lovely or encouraging messages. Being a part of the online sewing community and Sew Over 50 in particular has been an absolute joy and a lifeline at times. We need to lift each other up more often, call out injustices when we see them but not to the extent that it becomes bullying of individuals, that isn’t right either. 2020 has been a year of huge upheaval, I plan to restart 2021 with fresh sewing plans to help me to feel more positive about it…it’s going to be a bumpy ride!

Until next time, stay safe!

Sue

a multitasking Festive outfit

The Festive season is often a reason to make, or buy, a special new outfit to wear for office parties or Christmas Day but this year’s Festive season things will be very different for most of us. I don’t want to be entirely negative though so, as part of the Lamazi blogger team, I thought I’d make something which is a little bit Christmassy but will double up as a ‘regular’ winter dress too. 

I’ve chosen the cord velvet from Danish Design in a gorgeous shade of aubergine-I’m always a sucker for purple-but it comes in several other beautiful rich shades including a sumptuous gold and a stunning teal too. I picked this fabric because it’s a medium weight stretch jersey and has soft pile which makes it lovely to the touch. I’ve made a dress but you could easily make tops or wide-legged pants in it, or babies and children’s clothes too because it’s washable and crease resistant. 

Whilst I love a complex make to really get my teeth into I felt this wasn’t a garment which warranted lots of time. Making a special Christmas once-worn garment wasn’t appropriate any longer so I wanted something quite simple but adaptable and for that reason I’ve picked the Somerset T-shirt by Maven Patterns. I’ve made a few of these now, the bones of it are beautifully simple, it has a self-neatened bateau neckline, a slightly fitted silhouette and four sleeve options. I’ve chosen the Bishop sleeve with a long cuff but I’ve hacked the sleeve to make it even fuller, and I’ll lengthen the body to create a dress finishing below the knee.

Another idea was to add a flared skirt which looks nice but didn’t think I would use it as much as the straight version.

The Somerset has excellent very full instructions with lots of tips and advice to get a good finish. There’s a useful sheet to write all your information including body measurements and fit alterations, and a fabric stretch gauge to check you have enough stretch for the pattern to fit properly. You can also list the needle type and size you’ve used, stitch type and length and anything else you might want to remember for another time. 

To increase the size of the sleeves I took the bishop sleeve pattern and drew 5 vertical lines from each of the notches from shoulder to hem. Each segment will become slightly wider as it gets nearer the bottom edge so make sure they are even in size.

Cut a piece of spot and cross or tracing paper bigger than the pattern as it is, mark a grainline running right down the paper and then lay the pattern piece on top of it, matching the grain on the pattern to the grain line you’ve just drawn. Next, I carefully cut up to the top of the marked lines taking care not to snip right through at the top, keep it attached by a tiny amount to act as a pivot point. [If you don’t want to cut your original pattern piece I suggest you trace off a new one to use instead] Then you splay the hem edge apart by a few centimetres each, I added 2.5cms between the each of the ‘side’ segments and 5cms to the central one. By doing this you’re adding fullness at the hem but not altering the sleeve head. You could put additional fullness to the sleeve head by opening the top edge too if you wanted. I lengthened the sleeve by 5cms too so that it would have plenty of blousy fullness into the cuff. 

Trace around the new shape using a tracing wheel or pencil and cut out the new piece transferring all markings. One final change I made was to add a bias grainline because I knew I wanted to play with the stripe direction of the rib on the fabric.

I had pre-washed my fabric and partly tumble dried it on ‘low’ before letting it dry completely on the clothes airer, it seemed to survive the experience just fine. 

I made an arbitrary choice of how long to make the dress by simply holding the tape measure at my shoulder and seeing where it came to at about mid-shin! I attached another piece of spot and cross to the bottom of the front and back pattern pieces and drew on the skirt length I wanted, plus a generous hem. I knew I would have to make some adjustments to the hip and thigh during the fitting stage, just make sure that the hip and thigh measurements are plenty big enough because you can always remove some, it’s much harder to add later! 

The ‘cord’ runs across the width of the fabric and I wanted the rib to run down the length of my dress which meant I had to fold the fabric across the width. Try not to twist the fabric if you have to fold this way, I marked a single rib by following it across the width with pins so that I can see it clearly. Fabrics like corduroy, velvet or velour have a pile or ‘nap’ which will shade so if you cut some pieces facing one way on the grain and some pieces running the other way then you will end up with a garment that looks like it’s been made with two different colour fabrics, even though you know that isn’t the case. If you’re unsure what quantity of this type of fabric to buy go with the ‘with nap’ amount on the pattern information and follow the one-way layplan to cut out.

I marked the rib across the fabric with pins so that I could be sure it was folded correctly and would not be twisted.

Once I’d cut all my pieces I followed the making instructions which are very comprehensive. If you have a walking foot for your machine I strongly recommend you use it because velour like this has a ‘pile’ and has a tendency to ‘creep’ as you sew so you might find that it starts off with all the edges matching but by the time you get to the other end the two fabrics are no longer matching. I also strongly recommend you tack any seams you are unsure about. You could use a million pins but by the time you’ve done all that you could have basted it in place which does the same job and usually more effectively. I was able to coverstitch the neck and the skirt hem on the Pfaff Coverlock 3.0 I have on loan as a brand ambassador but it works just as well by overlocking the raw edges and twin-needle stitching them down, or zigzag and twin-needle, or two rows sewn singly if you don’t have a twin needle. When it comes to pressing a fabric like this, if you don’t have a special needle board (and few of us do) then you should press on the reverse at all times. You could place a towel on your pressing surface and lay the fabric on top so that the pile of the cloth is against the pile of the towel which will help protect it. Use a pressing cloth as well. These tips will also apply to regular corduroy or any non-stretch fabrics with a pile too.

The bell of the sleeve is gathered using shirring elastic which helps to retain some of the stretch required for the cuff. 

Once the sleeves were in I sewed up one side seam directly on the overlocker and then pinned the other side seam to fit myself. This was because I didn’t know if I’d need a split at the hem to be able to walk in the dress and I didn’t want to end up with loads of unpicking!

First I tried it right side out to get an idea of how it was fitting initially, then I turned it inside out to pin.

I looked at the fit in the mirror first of all and the sewn side seam was quite wavy, this could be cured by either adjusting the differential feed on the overlocker so that it doesn’t happen, or you could stitch the seam on the sewing machine and then overlock the edges [This is what I opted to do because I could see I had to take a fair bit off the side seams anyway to achieve a fit I was happy with] Then I put the dress on inside out in front of the mirror and pinned out the excess. I turned it right side out and tried it on again to check the fit, then finally sewed both side seams on the sewing machine, I used a ‘stretch’ needle, a ballpoint or jersey needle performs the same task. Either use a short straight stitch or a straightened out zigzag, make some samples to see which works best for your particular fabric. 

Now I tried it on the dress inside out to adjust the seams
I pinned out a fair bit of the side seams to give more shape through the waist and hips.
still Inside out
Finally I put the pinned dress back on the right way around to check I was happy with the fit before making the adjustments.

Lastly, the cuffs go on and the skirt is hemmed. 

And that’s pretty much it, it pops straight over the head so no tricky closures, because of the stretch it didn’t need a split, and that means there’s room for Christmas lunch and it won’t look like a dish rag after spending the afternoon curled up on the sofa watching Christmas telly!

cheers!
I’ve dressed it down with an ancient knitted gilet plus a wide belt, long boots and my much loved Alexander McQueen scarf
I love a scarf to keep my neck warm!
It could be the strangest of Christmases but let’s raise a glass to a much better 2021

I have to say that I’m really happy with this dress because it ticks all the boxes I wanted it to. It’s comfortable but it looks Christmassy, it looks great with opaque tights, heels and jewellery, but also with boots, a chunky belt, a roll neck top underneath for extra warmth or a cosy scarf…and did I mention it’s comfortable! #secretpyjamas It also has the advantage of rolling up and going in the corner of a bag or suitcase and coming back out again not needing a press. Bonus!!

If you have a favourite T-shirt pattern you could try lengthening it into a dress, Tilly and the Buttons Tabitha from Make it Simple does that. You could browse the SewOver50 post I wrote listing loads of go-to T-shirt patterns for inspiration, or maybe copy a RTW one you already have?

At 160cms the fabric is very wide so a little will go a long way, and because it’s so soft it would be lovely for children’s wear too. It needs a little bit of careful handling but a lot of that is in the ground work. Make sure you lay it up and cut it accurately to minimise unnecessary stretching or distortion (try to keep it flat on the table or lay it up on the floor) pin or tack the seams so they don’t move about and press carefully as you go and you should be fine. 

It’s been an incredibly tough year for so many and I wouldn’t blame you for not feeling like making anything new to wear. However, if crafting and creating bring you joy and respite then you could view it as a gift to yourself, and when you choose to buy from small companies like Lamazi and Maven then you are helping them too.

Thank you to Lamazi for providing me with the fabric for me to write my review, and I hope you find it helpful. 

Until next time, Happy sewing

Sue

I made myself a rain coat!

Considering it’s a raincoat this is a project that came out of a clear blue sky! In other words, I had no plan to make a raincoat until, that is, I spied this gorgeous showerproof Missoni fabric on Dibs’s Selvedges and Bolts website. I’m not normally a sucker for impulse purchases of online fabric but this one with it’s eye-catching colours just had my name on it! 

Once I had it in my hot little hands I had to come up with a design for a jacket. My starting point was a vintage pattern for a kagoule-type top which is probably from the late 50s-early 60s but there’s no date on it sadly. As was typical of patterns from that period it’s a single size, medium, which I already knew was OK because I’d used it once before about 4-5 years back. I also have a cheap-as-chips packamac which is a nice style but turned out to leak like a sieve! I would use this as my sample to follow how components like the zip and a storm flap on the front go together for example. There were a few other patterns which gave me some ideas including The Maker’s Atelier Utility Coat and from these various sources I sketched a few drawings to come up with a design I liked. 

As the fabric was expensive I only bought two metres so I had to progress carefully for each step. I made a new pattern for most pieces because the new version would be mid-thigh length and have a full length front zip opening to be covered by a storm flap, plus I repositioned the shoulder seam forwards to minimise possible leakage through the seams. I altered the side seam shaping a little by curving them out slightly, to give a bit more room for bulky jumpers/sweatshirts. I reused the original hood and sleeve patterns, plus I settled on two pleated patch pockets with separate flaps on top. To reinforce the shoulder area I made an inner lining pattern which acts as an internal yoke. 

I read up a few general tips for sewing shower proof fabric before I started-I didn’t need it to be waterproof so I didn’t tape each seam but I did lengthen the stitch slightly, to reduce the number of puncture holes through the fabric which could potentially let water in. I also used a fine Microtex needle to reduce any friction there might be whilst sewing too. This fabric is different to other woven fabrics because of it’s special coating so any mistakes which have to be unpicked would leave holes. It’s possible to press it carefully but not too hot or you could melt it. Use a pressing cloth over the top and warm the iron up incrementally on a scrap piece until you’re happy with the temperature.

It took me a little while to source the hardwear I needed, many suppliers of zips had the length but not the colour, or the colour and not the length! Eventually I bought two open-ended zips of different colours from Jaycott’s.  I couldn’t seem to find any suitable coloured round elastic online so eventually I settled on narrow grosgrain ribbon from VV Rouleaux for the hood and back waist detail instead, plus I sourced some small spring cord-lock toggles to secure the ends where needed. I found the lining for the hood and the shoulder yoke amongst fabrics I already had.

I sewed the jacket up in ‘bite-size’ chunks of time rather than pushing on through-mostly because I was often waiting for something to arrive in the post before I could do the next part. As I wasn’t following a particular set of making instructions I was winging it to a large extent, the order of making was often influenced by another section of the garment having to take a priority at certain points.

the front storm flap somehow came up a bit long which wasn’t a problem, it just meant some unpicking and resewing-at least it wasn’t too short, which would have been worse.

It would have been better if the sleeves could have been just 4-5cms longer-I’m not sure why they seem short because I’m sure they weren’t on the original sweatshirt-perhaps the big difference in fabric types was a factor? Anyway, no matter, I added a small section of elastication to the top of the cuff to bring it in slightly to help prevent drips seeping back up my arms if possible! I should add that normally I would pattern-match the print but I didn’t see any need to do that for this jacket.

elasticated cuffs and pleated pockets

Because this is very much a ‘make it up as I go along’ garment I used some of the ribbon to neaten the neck/hood seam and jolly nice it looks actually!

the finished neck area, I chose to use the purple zip in the end.
Inside, the shoulder area is stabilised with two layers of lining
I gave a bit of shape to the back by adding a channel with ribbon slotted through and secured with the toggles.
I found these pliers amongst my stuff, as you can see from the price they were bought a goodly number of years back! It turns out they work fine and I managed to apply four successful snaps to the front.
Finished!
You won’t miss me in this!

For an unplanned garment I’m very pleased with the outcome, I love the colours and I hope it will be useful, it folds up pretty small so I can shove it in a bag if I’m going out and don’t want, or need, to take a heavier coat. It’s very much one of a kind! In normal times I wouldn’t have been sourcing everything online, I enjoy browsing in real shops for haberdashery and trims, but not just at the moment.

Until next time, happy sewing

Sue

Refashioning a Simple Sew Kaftan into PJs

Two years ago one of my early makes as a Simple Sew blogger was the Kaftan pattern made in a tropical print cotton lawn kindly given by Doughty’s online fabric store. It was very much a ‘holiday’ garment but, even so, I didn’t wear it as much as I’d hoped because whilst the fabric was quite lightweight there was too much of it around my legs, it was probably a size too large and the whole thing just looked quite bulky. It would have been better in something like a very lightweight cotton voile or Batiste, or a printed chiffon or georgette as a swimsuit cover-up. 

Anyway, rather than make another new garment for my next Simple Sew post I’ve decided to refashion the Kaftan into pyjamas instead, retaining the top section and cutting shorts from the remainder using the Lapwing trouser pattern. 

I studied myself in the mirror wearing the Kaftan and decided to reduce it to approximately 25cms long from the original waist seam at the side-I would make it level all the way around although the waist seam rises up at the centre front. With the remaining fabric of the skirt I would make the shorts

I took the cord out of the waist and initially decided I would replace it with elastic instead although eventually I changed that plan. I felt the sleeves were a bit long and restrictive to sleep in so I shortened those too by about 5-6cms. I removed the pompom trim first although I didn’t reuse that in the end because I opted to create a curved opening on the shoulder seam instead, to soften the lines.

calculating how much to remove from the sleeve and underarm seam.
I took a good chunk off the sleeve and the underarm seams.
after I cut excess off one sleeve and side seam I placed the pieces onto the other side so that they mirrored each other.

I partly unpicked the shoulder seam and overlocking sufficiently far that I could re-overlock the edges singly and then roll hem finish them so that the overlock stitches were enclosed.

curving the shoulder seams

I also took quite a bit of fullness out of the bust section at the underarm so that it would fit closer to my ribcage, I didn’t remove any corresponding fullness from the newly-shortened skirt though, I simply pleated it up to fit the top part and rejoined them together at the waist seam.

I pleated the ‘skirt’ fullness into the waist seam.

I neatened the new hem using the overlocked rolled hem method again and finally trimmed the waist seam with co-ordinating pink rick-rack from Backstitch. I decided against putting elastic in the original casing because I felt it would ride up while I slept and become annoying around my ribcage. This has proven to be the right choice because the top is comfortably loose without being huge.

Moving on to the shorts, I used a RTW pair I’ve had for years to compare measurements and also to compare against the size chart for the Lapwing trousers. I traced off the pattern in a size 14 because I wanted to create a hem similarly-shaped to my RTW ones for the shorts, they have a slight upward curve at the side seams (I dithered about adding side pockets as per the pattern but in the end I left them out, I thought about adding a patch pocket on the back instead but I didn’t do that either!) 

I was able to fold the original front skirt section down the centre front line and cut a pair of front shorts pieces from that. I placed the piece as near to the top as possible so that I had the maximum amount of fabric left to cut the bias strips from. 

As is very often the case the back section of trousers was bigger than the front so this meant I couldn’t cut it out of folded fabric. I laid the fabric out flat instead and cut them singly using the centre fold as my guide for the grain and making sure to flip one so that I had a pair, not two the same! 

In order to hem the curve I made a wide bias band pattern piece which, ideally, I would have cut one for each leg but the remaining pieces of fabric from the front skirt didn’t allow me to do that so I cut several shorter pieces which I joined to make a long enough strip. 

cutting the bias strips from the remainder of the front skirt panel
joining 3 shorter bias strips to create enough length for two leg openings
attaching the bias to the hem, RIGHT SIDE to WRONG SIDE!

I joined each side seam first, neatened it and pressed towards the back. Having joined the bias strips I pressed over one long edge by 1cm. In order the self-neaten the hem I placed each strip RIGHT side to the WRONG side of the shorts (see photo) and stitched it in position.

bias sewn in position, this then flips to the outside and encloses the raw edge neatly inside it

Then the strip flips up to the right side, thus also being right side out and enclosing the raw edges. You could simply top stitch this in place along the folded pressed edge or add a trim, I put more rick rack on here to match the top. Now sew up and neaten the inseams. 

the almost-finished inseams

The rest of the shorts were very straightforward, I placed one leg inside the other so that the crotch seam was right sides together then stitched it twice a couple of millimetres apart before neatening.

I pressed over the top edge by 3.5cms then made two round-ended buttonholes for the ribbon to come through at the centre front. Next I top stitched close to the top fold, then sewed another row of stitching 3cms from the fold to create the elastic channel. I measured my elastic for a comfortable fit and added a short piece of dusky pink ribbon (which probably came off a gift bag or something) to each end of the elastic. I slotted this through the buttonholes and then secured it so that the elastic was just out of sight with only the ribbon showing through the button holes. Job done!

I’m pretty pleased with how my new pyjamas have turned out, I reckon I’ve already worn them more times than as a kaftan so that’s got to be a good thing, right? At least this pretty fabric isn’t languishing in the wardrobe waiting for a warm sunny holiday which is nowhere on the horizon any time soon! 

I’m a bit uncomfortable about sharing photos in my PJ’s but it’s in a good cause I guess.

Until next time, happy sewing

Sue

A few hem finish suggestions-a Sew Over 50 topic

Over on the @SewOver50 account recently I shared a few of my favourite ways to finish hems or raw edges, although course it is absolutely NOT a definitive list by any means. I thought I would expand a little here on the blog using more photos of projects I’ve made in recent years. They are in no particular order either and if I wrote a blog post about the whole garment then I’ve linked it so you can read more if you want to.

Obviously there are the usual hand-finished hems using slip hemming stitch or herringbone stitch for example, which I use a lot too, but I thought I’d share a few alternatives which you might not know, or haven’t used for a while.

I’m beginning here with a faced hem…

This was the hem of the first Refashioners project I attempted. It was a jacket made from two pairs of my husband’s old jeans and because I wanted to use as much of the reclaimed fabric as possible I cut shaped facings for the lower edge. As you can see I also finished the edge with bias binding I made from offcuts of dress fabric.
The inside of the finished jacket looked like this. I understitched the lower edge of the facing to help it roll better and also slip-stitched it in various places including the seams and pocket bags to secure the facing without the stitching showing on the front.
This is also a much more shaped facing on the hem of Tilly and the Buttons Orla blouse. This can be a beautifully neat finish on a curve, it gives some ‘weight’ and crispness to the hem too and makes it less likely to curl upwards on blouses for example.
This Orla blouse was from 4 years ago, I like the exposed zip in the back too (the instructions for putting it in were excellent if I remember correctly)

The next one is an interesting hem finish which is very useful especially if you want a quality finish on evening or bridal wear. It uses something called ‘crin’, crinoline or horsehair braid (it doesn’t involve actual horsehair any longer though!) I’ve used it here on an organza skirt for the Dior New Look-inspired evening dress I made 4 years ago. As well as a crisp finish I wanted the hem to have distinct body and wave to it so this was the ideal technique. Crin comes in various widths, this was 5cms, lots of colours too because it’s more commonly used these days to trim hats and fascinators.

Helpfully, my fabric had horizontal stripes, some opaque and some sheer so I started by placing the crin on the front of the fabric and lining it up with the bottom edge of an opaque stripe. It is stitched on very close to the edge being careful not to stretch the crin as I sew, it’s important it lies flat. By sewing the crin onto the right side of the fabric when you flip it to the inside the raw edge of your fabric is enclosed underneath. To be honest I was making up the method as I went along because my experience of this technique previously came from altering wedding dresses which used it so this isn’t foolproof. I would strongly advise you to try a few samples first so that you have the version which looks best for your particular garment. [the eagle eyed amongst you might notice in my photo that I’ve sewn the crin to the wrong side of the fabric! I obviously did it and photographed it before realising what I’d done. As this was four years ago I don’t have any other photo!]
Once the crin is turned up to the inside I slip-hemmed it by hand, it looks a bit messy on the inside because the black shows up but it’s absolutely fine on the right side.
the finished dress, it’s one of my favourites I’ve ever made, and it’s a partial-refashion too because the velvet bodice used to be a skirt!

If you’re making a wedding dress for example and mounting all the skirt pieces onto another fabric, when you use crin on the hem (or bias binding for that matter) by hand-sewing the hem all your stitches will be invisible because you can catch them just through the mounting fabric. This is a couture technique so if you look at red carpet dresses with no visible stitching at the hem this will be how they achieved it. You can apply it as appropriate to any garment that you’ve mounted to another fabric though.

The next couple of photos are where I’ve used bias binding to neaten a hem. I find this a really useful technique if you need the maximum amount of hem because you can sew a very small seam allowance. It’s good if you’re letting down hems to gain length too, on trousers or children’s clothing for example.

Sew the binding on very close to the raw edge, this was a Simple Sew Lizzie dress
Here I made my own binding which is first sewn on with a 5mm seam allowance and then understitched which is what you see here. I made this Grainline Farrow dress for a magazine review
The hem is turned up and I’ve slipstitched it in place by hand.
This is the same technique with ready-made bias binding.
the finished skirt.
My final example is the little christening gown I made from a wedding dress.

If you have fine fabric why not consider using your overlocker if you have one on the rolled hem setting? Refer to your manual for specific instructions how to adjust your machine and make samples first to ensure it’s going to be satisfactory for your particular fabric. You’ll frequently see it used on chiffon or georgette but I’ve used it successfully here on fine cotton lawn, jersey and a stretch velour. If you don’t have an overlocker you can probably achieve a similar finish on your sewing using a rolled hem foot ideally and a small zigzag stitch-as always I would urge you to experiment to see what is possible. Some of the simplest machines can still give you an interesting variety of finishes.

This is one of my variations on the Camber Set
I roll-hemmed a straight strip of fabric here which I then pleated onto the sleeve using a fork!
I roll-hemmed a straight strip top and bottom and gathered it onto the sleeve here.
An extended length sleeve on the River pattern from Megan Nielsen, roll-hemmed and elasticated

I find the next couture/tailoring technique very useful on sleeves as well as coat, jacket or dress hems. I’ve used it here on my Tilly and the Buttons tester-made Eden. I wasn’t taught this method as such, I discovered it for myself whilst doing alterations taking up sleeves for people. I haven’t ever encountered it in pattern making instructions but I think it’s an excellent way of stabilising the cuffs of coats and jackets.

Using strips of iron-on interfacing to stabilise the area where the cuffs fold up
This is felted-type woollen fabric where hand stitching is unlikely to show through but if you have a finer fabric I would make the interfacing strip wider so that I then caught the inter with my stitches and not the fabric itself. See the next photo to explain this better.
You can see the interfacing is above the hem line here and I’ve herringbone stitched it by hand. You can also see how I’ve created a chain link to anchor the lining to vent opening on the back of the skirt.
the hemming stitches aren’t visible from the outside using this technique.

For this next finish I’ve used a triple straight stitch to create the effect of top stitching on the hem, and several seams, of this Simple Sew Zoe hack I made last summer.

If you have the foot attachment and stitch capability for your sewing machine you can always try blind-hemming. I must admit I don’t use it that often, and only then on completely straight hems. There is a bit of a knack to it and I tend to only use it on a busy print which will disguise any botched bits (yes really!) or if I’m tight for time compared with any other method. It’s not quite the same quality of finish you will see on RTW clothes though which uses a specific machine to blind stitch the hem.

Personally I always think the stitches show a bit too much no matter how hard I try to get them really tiny. It’s very easy to catch a bit too much fabric, or none at all! In truth I probably don’t practice enough!!
This Regatta dress from Alice & Co was an ideal application because the skirt has a straight, unshaped hem.

I think it’s worth mentioning that I like to use bias binding to neaten necklines (and armholes) too. I particularly like this as a way of avoiding using a neck or armhole facing which can be notorious for constantly rolling into view or flapping about annoyingly. The version you can see in the following two applications is a strip which I’ve folded in half lengthways first, the raw edges are matched and sewn. The seam is trimmed slightly and snipped if necessary, then turned so that the edge is enclosed and finally topstitched close to the folded edge to secure. In both the following examples I have sewn the binding on the wrong side of the fabric so that the binding turns to the outside to be visible and decorative but you could just as easily sew it to the right side so that it turns to the inside of the finished garment.

the binding is sewn on the inside first
the binding then flips to the outside to become visible.
This dress was made for the Simplicity pattern hacking challenge last year
Instead of the usual hem on this dress I created a casing which I threaded elastic through.

I’ve have included another variation of binding on a hem to show you how it can be combined with other techniques to achieve a quality finish. I used it here on a sheer organza which was mounted onto a backing fabric of slipper satin. This meant that when I turned the hem up the hand-stitching was invisible from the outside because the stitches only went through the mounting fabric.

the hem from the inside
the finished hem from the outside.
the finished dress, I was off to a wedding!

The next technique is more usually the choice of the pattern designer than the dressmaker, although if you know a little about pattern cutting you might be able to do it for yourself. This is an example of a deep grown-on faced hem on the Trend Patterns Square dress which I’ve made twice. It works brilliantly on this dress because the hem edges are straight (square!) plus it gives real weight to the hem which is another satisfying detail.

Inside the hem the corners are mitred.

Pin hemming is a technique I’ve used for decades on fine fabrics. You can replicate it using a rolled hem foot attachment on your machine although it can be trial and error which size works best for you with variable results. I have two different sizes of foot, 2mm and 4mm and I can’t get on with either, I’ve since been told that 3mm is the optimum size for most fabrics but I’m not prepared to risk another mistake when I know I can achieve a good quality result this way instead.

Simply put, I turn over the raw edge by approximately 5mm and stitch very close to the folded edge. Carefully trim the excess close to the stitching line and give it a light press. Then turn again and stitch a second time on top of the first row of stitching. This particular example is from the Trend Bias T-shirt dress I made a few months ago.

turn stitch and trim
make another narrow hem, stitch a second time on top of the first line. Press. There will only be one row of stitching visible on the outside.

If you read about my pattern hack of the Simple Sew Cocoon dress you will see how this variation of hemming came about. I added a large chunk of fabric to give extra length to a dress that would have been too short without it. This method is probably best on a straight hem, you could use it on sleeves too.

attaching a band to the hem.
The finished dress (worn with walking shoes during lockdown!)

This next one is a very much trial and error. I used an edging stitch on my Pfaff sewing machine to hem this Broderie Anglaise blouse which I made recently.

I put a piece of Stitch and Tear behind the fabric as I sewed.
It looked like this after I finished
It will look like this on the reverse.
gently pull away the backing and then carefully snip off the excess fabric up to the stitching line.
Eventually the hem looked like this, the sleeves are trimmed with Broderie Anglaise

I’ve used a variation of a faced hem recently when, instead of bias binding, I used straight strips of fabric to turn up a straight hem on a dirndl skirt. There will be a blog of this particular garment coming soon…

I had some narrow strips of white cotton lawn lying around so I joined them to make a piece long enough to go around the whole hem.
I folded the strip lengthwise.
attach the strip to the hem, raw edges together.
I understitched it, plus there’s a band on the front which is what you can see folded over in order to enclose the facing eventually.
The band folds back to enclose the hem facing.
There’s a little bit of puckering on the reverse here but this is invisible from the front, a good press will sort that out.

To finish with is a very simple method of rolling a fairly narrow hem. Overlock the edge first using three (or even two) threads then carefully turn it once and then again so that the overlocking is enclosed inside. If the fabric is quite ‘bouncy’ and won’t stay in position you could press the edge over once first and then roll it the second time. Whilst the result is wider than pin hemming it is narrower, and possibly quicker and more accurate, than a simple turned hem.

Stitching the hem with the overlocked edge rolled to the inside.

This last suggestion is from a project which will be blogged very soon. I cut 6cms wide bias strips which I used to create a self-neatening hem on a pair of pyjama shorts.

the bias strips were applied right side to wrong side on the shorts hems.
the bias strip is on the inside at the moment
It is then turned up to the outside where I trimmed and stitched it with ricrac braid.

I hope you’ve found my suggestions useful or thought provoking, is there something here which you’ve never encountered before, or that’s made you think how you could use a technique you already know in a different way? The idea is to show you a few ways of finishing hems, or raw edges, in new and interesting ways. I’ve not included the usual hand stitching methods because there’s nothing new to think about, although please let me know if you use these methods in a more unusual application. Just because the pattern instructions tell you to finish the hem a certain way doesn’t necessarily mean you have to do it that way…although think it through carefully just in case the really is a reason!

Until next time, Happy Sewing

Sue

Refashioning-from old jeans to a new jacket 2016

This is an edited version of the original post from 4 years ago. Not all the pictures are here but I hope you get the gist of the jacket refashion. Sue

I’ve never been a great one for up-cycling really, I guess as a former sample cutter I always enjoy the challenge of cutting something new out of fresh fabric in an economic or inventive way. I think that’s probably the same reason I’ve never bothered with quilting or patchwork-cutting fabric into small pieces and then reassembling it in a different order-not for me I fear. Mind you, back in the day we were less concerned about ‘reduce reuse recycle’ than we’ve since, thankfully, become.

Anyway, at the beginning of August, Portia Lawrie announced that her Refashioners 2016 competition for this year would be to turn jeans into…something else, anything you like! Last year’s theme was shirts and I saw plenty of imaginative ideas where mens shirts became dresses, skirts, different shirts and the winning entry was trousers!

Anyway, I was pondering vaguely on the theme (almost entirely driven by the amazing prize-package that was on offer, the prospect of fabric/patterns/sewing books is enough to stir me into action) and thinking that I didn’t actually have any old jeans in the house to cut up-my girls wear way too many stretchy skinny jeggings to be useful and Mr Y is a keen believer in wearing things to infinity and beyond!

However, as luck would have it, Mr Y was having a rare ‘turn out’ and what should I find but TWO pairs of almost identical jeans…except they weren’t denim jeans, they were corded drill (looks like corduroy but not fluffy) Would they do? a quick email to Portia who said she thought they would. Excellent-green for go!

C06550CE-A7F0-4AC1-B050-758F0941709DE50E474D-DC6D-4A0A-A1AD-74C71DD25BD5923A0798-6055-47D0-97CF-8E7C4EC13A0C

The next issue was that they weren’t even blue, they were very similar, very well washed shades of stone/sand/beige…you get the picture? Then I remembered I had a packet of unused Dylon machine dye in indigo-score!

So I set about unpicking the offending trousers…this took rather a long time to be truthful and made a huge mess with all the threads everywhere on the carpet in my workroom, Threadquarters.

I didn’t have a clear idea of what I wanted to make but I knew that the more useable fabric I could harvest the better. Once I’d taken everything apart I had four legs with side seams still intact, two waistbands with pockets attached and two zips removed. I popped the whole lot in the washing machine with the dye and 500grams of salt, you run the hottest cycle and then, when it’s complete, you run the whole cycle again with detergent. This is to remove any excess dye and also wash the machine out too (although the next proper wash I did was a dark one just to be on the safe side) I was pretty pleased with the outcome. The two pairs were by and large virtually the same colour now, interestingly the top stitching on both hadn’t dyed as the thread must have been synthetic, and the zips hadn’t either. That was a pity because I thought I might have been able to use them but they were just different shades of brown now-yuck.

After a lot more thinking, and sketching, I settled on a jacket for myself because I took the view that if I was going to spend such a lot of time on this with not a lot of realistic hope of winning I wanted to at least have something I’m happy to wear!

To work! I had a rummage in my-ahem-extensive collection of patterns to see what I had that might be basis to use. Most jackets I’ve made were years ago so they’re all a bit 80’s tailored but then I came upon a pattern from the 1970’s that my neighbour had given me when she was having a turn out (more recycling?) The jacket in itself wasn’t something I’d wear but I loved the curved bust dart in the front, it was collarless and edge to edge and the back was in two pieces.

All this meant that it could be a go-er. I spent a while fiddling with the pattern pieces and the trouser legs to see what was going to go where. Because I wanted a shorter length jacket that helped, the front would fit on to include the original side seams and the back would go above that with a modification, and the sleeves would come out of the other legs. They were all mostly on grain which pleased me a lot. (When things aren’t cut on the grain or on the bias they can go very wobbly when sewn up)

I forgot to mention that I decided to trace off a new spot and cross copy of the original as it was quite tatty, and I was shortening it anyway.

Because the back wouldn’t fit on without overlapping the front I chose to add a panel in the back so that it became four panels. This isn’t difficult, I just drew on the new seam line where I wanted it, added seam allowance of 1.5cms and a balance mark to the back panel section and cut it off. The remaining new side panel then needs the 1.5 cms added back on plus another 1.5cms for its own seam allowance. The photo should clarify this a little.

Once I’d got the panels sorted I could pin them onto the fabric.

I tried as much as possible to keep things on a proper grain line so that they behaved when I started sewing them together. Out of the other legs I cut the sleeves which I positioned so that the original seams ran straight down them. One of the things I liked about the pattern was the little elbow darts which would give them a cheeky feature.

Another rummage in my stash found me an open-ended zip in blue, I’d decided to tidy up the inside-and make it a bit more individual-with pretty bias binding. I managed to cut front and back neck facings out of what I’d got left from the sleeve leg.

7F7AB174-65DB-4197-A659-5651CA2E7791

Sewing the jacket together was very straightforward after that. I top stitched most of the main seams in part to match them to the originals and to link it all together, this meant I had to put the sleeves in on the flat rather than set-in but they look ok.80754ED9-5190-4641-A097-A74608863C759CC3A98E-A35F-4DBD-84F2-B5D5227BB492C121A135-9D89-4F06-A3D4-90D8E6A9CDCB_1_201_a6388B67D-74AA-46F6-B415-74128E157638

Because the zip was too long it gives an interesting finish to the neckline where there’s a section at the top that doesn’t do up, which I like. I wanted to use the pockets too but I didn’t want them spoiling the outside clean lines so I devised a way of having them on the inside.

128D0B98-4858-40F6-8066-4D410852FB92_1_201_a2C32C344-8E36-49B0-A5F2-55CBD5BD83E5_1_201_a4BFDDFAF-6979-4503-9CFE-8B3623EFEDAF

The lower facings (cut from more scraps) fold up to neaten the bottom edge of the jacket.

I ran out of the red binding but I found about a metre left of the binding I made to go on my favourite dress so I used that instead. I understitched the lower edge in a fluoro-pink thread (just because) and then slip stitched the facing in place by hand so that it didn’t show through on the front. [I put binding on the cuff edges too so if I turn them up it’ll be visible]

I think the internal pockets might be quite useful if I ever go poaching!!

DACE1532-BB41-4ED4-8616-233BC43D8E88_1_201_a5D8FA1F1-E86E-4D08-8774-C4ECE06D878F_1_201_a

The only bits I didn’t find a use for in the end were the waistbands. I thought I might have used them on the lower edge but in the end I decided I didn’t really want the band on it and I wasn’t sure poor my machine could cope with the number of layers that it would have to sew through.

So there you have it, my entry to The Refashioners 2016. I’m really pleased with the outcome, it’s a tad big but that’s fine and it’s totally wearable. I used jeans that were headed to the charity shop (or even the bin), a gifted vintage pattern, binding I already had and a zip from my stash, a win all round I think. Needless to say I didn’t win the big prize but I did get an honourable mention in dispatches. 

The jacket got its first outing in the wild, on the way to the first Sewing Weekender in late August 2016. I’m very happy with it and I’ve had loads of wear out of it. I think it achieved my aim of not looking too much like a thing that’s been made from something else and being not very good in the process. I’ve never really aspired to being designer so I know there will be far more original ideas than this but I want a garment that is wearable and useful to me and no one else. I hope you agree…although you probably wouldn’t say if you don’t!

7684DBF0-91EB-4F54-AA43-4F6B9CFBDA01

If you’re reading this in 2020 (and what a very strange year this has been!) you might have seen me wearing the jacket for my first trip back to the V&A museum in almost 6 months, the wearing of face masks being compulsory. I’m wearing it with a linen Trend Patterns Bias T-shirt dress which I included in a review here. The exhibition is Kimono: Kyoto to Catwalk which I also reviewed earlier in year. My hair has grown quite a bit too!

35ADC246-B2E3-4684-AB23-2072AB6A5DF5

Again, apologies for the gaps in the original photos but I hope you get the general idea of this refashion. 

There are a quite number of blogs and websites out there that can give you ideas and inspiration for this kind of project and Portia’s own is as good a starting place as any, she’s a great advocate of refashioning with so many clever ideas and in 2020 this is still very much the case.

Happy Sewing

Sue xx

 

 

A Simple Sew Cocoon dress hack

I had made two Simple Sew Cocoon dresses without alteration when the pattern was first released a couple of years back, and you probably know that I love a bit of a pattern hack so I decided that the style would be good for an adaptation. I’d drawn a few sketches of ideas and had a rummage in the stash for some suitable fabric when a funny thing happened…

I found I had already cut out a hacked Cocoon in the past!! I realised I must have done it easily two summers ago but then abandoned it because I decided it would be too short. I remember it was a limited amount of fabric, probably 2 metres, but I put it to one side and forgot about it. 

Fast forward to now, I wanted to make it up but I needed to lengthen it in a way I was happy with. I had truncated the bodice at Empire line just below the bust and then the skirt was two widths of the fabric, a simple dirndl. I’d cut the facings too but there was literally nothing else left except small scraps.

There’s a centre front seam in the bodice, I cut the dress horizontally under the bust at about Empire line

I went through various options including adding extra frill layers but to do that you gradually increase the amount of fullness needed for each layer, in other words, layer 1 would be 1.5x the waist measurement, layer 2 could be 2x the length of layer 1, and layer 3 could be 3x the length of layer 2. In simple terms this means longer and longer strips of fabric are needed to form each frill to be sewn to the previous one, and the longer the length of the dress the more layers you might need. Basically I couldn’t make the skirt any longer with what I had because it was already cut, and because of the lockdown I couldn’t go out to look for a suitable plain cotton. I returned to the stash and eventually found 50cms of cotton poplin which I know I bought at the same time as the original, I must have intended it as a contrast but never used it.

By cutting the 50cms piece across the width into two 25cms pieces I could join them at the side seams to form a loop and then fold them in half to create a 12.5cms deep band which I would sew to the hem of the dress! Simple! 

Once I’d worked all this out I sewed up the bodice, rather than hemming the cap sleeves I used some binding from my stash so that I could maximise their length. I planned to twin needle some top stitching in various places and I used two different coordinating threads for this. 

Bias binding sewn onto the sleeve then understitched
bias binding turned back
The completed sleeve with twin needle topstitching

I did the same around the V neck once the facing was sewn on, in order to get a pristine join at the point I carefully unpicked a couple of stitches and secured them on the reverse.  

I wanted side seam pockets (of course) so I had to cut them out of some plain cotton scraps, each piece was added to the side seam and then the side seams sewn up. 

The new band was initially slightly wider than the lower edge of the skirt so I restitched it until the two were the same width and matched exactly at both side seams. I used the overlocker with four threads to join and neaten the band in one step, I pressed the seam upwards and then twin-needle topstitched it to decorate. 

the band folded and pinned to the lower edge of the skirt

The final step was to run two rows of gathering stitches at the top of the skirt then sew it onto the bottom of the bodice, matching at the side seams. I pressed this upwards too and topstitched it as well.

For a dress which had languished with not much hope for two years I’m really happy with it!! I loved the fabric (which was from John Lewis originally I think about 4-5 years ago!) and I was so cross I’d cut something which I couldn’t imagine I’d wear if I sewed it up. By adding the deep band the skirt now has weight as well as length. It’s been so comfortable in the hot weather, why did I wait so long?!

we were heading out for our exercise hence the unsexy shoes!
we have a Henry Moore sculpture on loan for the duration of the centenary year of our town, maybe we can keep it for an extra year now that all the summer celebrations are cancelled?
Coronation Fountain
yes I have got water coming out of the top of my head!

Lockdown is easing in the UK since I originally finished this dress but I hope, as always, this hack has given you an idea of how simple it can be to take a section of a pattern you already have and give it a twist to become a different garment. I had very limited fabric with a print which still needed to match everywhere, by adding the hem band I’ve given it the look I was after…it just took a couple of years to think of it!

Until next time, happy sewing,

Sue

New Trend pattern TPC26 plus tips for handling a tricky fabric.

Firstly, I probably need to give you a quick explanation of why I’m making a fancy frock during the lockdown because it must seem rather incongruous.

This is my first post as a Lamazi Fabrics blogger and before the Covid-19 pandemic reared it’s ugly head I had offered to make an outfit using a slightly ‘tricky’ fabric in order to share a few hints and tips for sewing with it. I selected the beautiful Tencel/Cupro ‘Bark’ fabric in Lavender because we were going to a wedding in late May which would be the perfect chance to make a something using this special fabric. Very sadly that wedding is now postponed indefinitely but I’m making the dress because I’ll still need something to wear when it’s rescheduled. 

The fabric has a lovely weight and handle which makes it drape really well. It’s has a bark-like finish and is different on each side, you could use this to your advantage if you want to create an interesting visual effect by having some pieces with one side out and some using the reverse side. 

I made life harder for myself by choosing the new Bias T-shirt Dress by Trend patterns (generously gifted to me by them) in which EVERY piece except the sleeves are singles and strange shapes which means you cut everything out on a single layer of fabric right side up (RSU). Unlike most patterns, when you are cutting pairs of parts you can usually flip a piece without too much difficulty, however if you do that for a piece which must be cut RSU you would have completely reversed the print/design to the wrong side when you try to sew it up. This Tencel/Cupro has a nice look whichever side you use but my advice is to be really careful on printed fabrics before reversing any piece labelled RSU. 

Next, when cutting slippery or fluid fabrics (unless you have a lovely big cutting table) you’ll need to handle them as little as possible (by which I mean pulling them about to get them into position) which might be easier said than done. I know that cutting out is most people’s least favourite part of sewing but it’s so important to take time and care at this stage. If you’re cutting out on a table with straight sides use the edges as a visual marker to get the end of your cloth at a right angle to start with, ensure the weft (across the fabric) is nice and straight as well as the warp, pull a few threads to find the grain if necessary. If you have more cloth than will fit on the table in one go you could try having the excess rolled on a cardboard tube if you have one to keep it under control rather than sliding off the table all the time. 

Because my pattern has large awkward-shaped pieces cut from a single layer I had no option but to cut out on the floor! This can be physically quite tiring so you might want to get help if you need to. This is slippy slidey fabric so an extra pair of hands could help you lay it up nice and straight, again, rolling the fabric onto a long cardboard tube would also help keep the fabric taut and straight as you lay it out on the floor. This is not a fabric to use weights and a rotary cutter on unless the whole lot fits onto a cutting board without disturbing the fabric, if you’re spending time laying up the fabric carefully so that the grain lines are straight in both (warp and weft) directions you can’t then mess it about shifting a cutting mat underneath it and the pattern pieces need to be secured in place with pins. Cut out carefully moving the pieces as little as possible and try to keep them flat after cutting until you’re ready to sew. All of this will help minimise the pieces stretching out of shape, especially as a lot of this pattern has seams running on a diagonal. 

I felt that the length of the dress would probably be too long for me so I took some of the length out of the skirt pieces before I cut them out in fabric.
I calculated that approximately 5 cms would be sufficient to take out of the length so first I drew a line at a right angle to the grainline, then a second line 5cms from the first.
I pinned each piece to it’s ‘partner’ so that I could see if it would still align correctly after I folded out the 5cms.
It was really just educated guesswork but, eventually, by folding out the 5cms horizontally from each panel I was reasonably confident it would be pretty close.
Why didn’t I just take it off the hem at the end? You could easily do that but because I had just 2.5m of fabric, which may not have been quite sufficient, I could not take that risk so I did it this way instead. It took longer but removed the element of uncertainty.
This is almost everything laid up on the floor, I cut a linen version at the same time which is what you can see on the top. Whilst a single layer is often a very economic way of cutting fabric it’s usually more time-consuming to cut out so I did the two at the same time which was slightly risky but it worked out.

Once I’ve finished cutting out it’s vital to transfer all notches and mark darts and a couple of pivot points so I use old-fashioned tailor’s tacks (obviously you can use a textile marker pen if you prefer, I often do but it’s a pale fabric and I didn’t want to risk any marks being left) It’s a habit of mine to keep all the pattern pieces attached by just a couple of pins to the fabric until I need it, so that I don’t them get muddled. These are curious-shaped pieces so the chance of having them the wrong way round could be quite high! Next I stay-stitched all the neck edges on the machine 5mm in, if you have a very loose weave fabric it would probably be sensible to stay-stitch the bottom edge of the front bodice piece to prevent stretching. If you’re using a particularly fine fabric like chiffon you should stabilise the neck, and any other seams which could stretch, by hand-stitching very narrow cotton tape or ribbon over the seam line on the wrong side of the fabric. When I worked for bridal designer David Fielden many years ago we would cut the selvedges off the silk habutai linings for the seamstresses to use on necklines.

There is just a little fraying on the cut edges which I overlocked singly as I went along, as per the pattern instructions. Whether you’re sewing or overlocking the fabric I strongly suggest you have the whole piece supported on the table in front of the machine rather than feeding up from your lap. This is to prevent the piece becoming stretched as you’re sewing and possibly causing it to become misshapen.

If you find, as I did, that there’s a slight discrepancy between two seams (assuming that it isn’t an error in cutting or adjustment of the pattern) then pin it with the excess on the underside so that when you sew the feed dogs will take up the ease.

You can see the lower layer is a little longer than the top one and by sewing it with this on the underside means the feed dogs should take up the excess.
After sewing but before pressing it looked like this.

My photos should make it clearer, a good press will help steam out some of the excess too. Also, to minimise the risk of making a shiny patch on the fabric make sure you use a pressing cloth, you can often buy silk organza ones although I have a piece of plain fine pure cotton lawn which I’ve overlocked around the edge. I use this when I’m pressing darts or turning points or corners out too.

To sew an invisible zip into the diagonal seam across the back I machined the seam closed but I used a long basting stitch just for the section where the zip will go. This stitching will be removed later.

Line up the teeth with the basted part of the seam, this has been lightly pressed open already.
Pin the zip tape to the seam allowance with the seam and teeth matching.
I prefer to tack the tape to the seam allowance at this point but you could use Wonder Tape if you have it.
Now I removed the basting stitches and sewed the zip in using an invisible zipper foot. The zip I was using was longer than I needed.
Make a new stopper for the zip by carefully sewing backwards and forwards a few times over the teeth, cut off the excess then secure each side of the tape to the seam allowance using a regular zip foot.

Once the zip was in and side seams sewn up I checked the fit on myself. I cut a UK 16 and overall I’m happy with the fit and apart from the length I made no alterations to the bodice. Because I made the linen version first I already knew that the shoulders were a bit too broad for me and the sleeves dangled too much off the crown of my arm. I calculated that I needed to remove approximately 3cms to lift them up to a slightly better position. I found I didn’t need to alter the sleeve head though, fortunately it still fitted into the armhole. Another thing I did decide at this point was that the sleeve needed ’something’ else so I mocked up some small pleats and pinned the sleeve into the armhole to try out the effect.

I mocked up some small pleats with the sleeve pinned into the armhole.
I drew some markings so that I could then transfer the pleats equally to both sleeves.
More old-fashioned tailor tacks to mark the pleats.
The pleats are equally divided across the centre line of the sleeve.

After making the pleats in the sleeves and sewing up the underarm seam I used a ‘pin hem’ to finish the edge. This is similar to a simple rolled hem but even narrower. Begin by stitching a turning of approx 1cm very close to the edge, trim this carefully  

Sewing a pin hem, this is useful technique well worth mastering because if you haven’t got a rolled hem foot which could do the job, this gives a beautiful hem finish to fine or delicate fabrics.
Finished pin hem on the sleeve
Because I’d made the pattern alterations to the skirt length I wasn’t surprised to find there was a slight discrepancy in levels at the hem. Using a long ruler I averaged out a new straight line and then pin-hemmed it.

I love the 1930s/40s vibe of this dress, the drapey qualities of the fabric enhance the bias lines of the skirt in particular. I really enjoyed the challenge of putting the dress together, there are no particularly difficult techniques as such but it’s an interesting puzzle which you’ll need to spend a little time concentrating on, you’ll be rewarded with a striking but really wearable dress.

Thank you to Trend Patterns for gifting me the pattern, there was no expectation to write a review. You can read my previous review of the Square Dress pattern here. The fabric was provided by Lamazi Fabrics in return for a review which is also published on their own website.

I hope you find some tips and advice in here that might be of use to you if you’re thinking of using a fabric that needs a bit more forward planning than you’re used to. Trend have created another beautiful pattern with stunning and unusual details but the pieces cleverly work with the grain of the fabric so that working with the bias cut is a lot easier than it usually is. They have been gradually increasing their size range too so the TPC26 comes in UK sizes 6-22.

Quite a long blog this time so thank you for reading this far and, until next time,

Happy Sewing

Sue