New Trend pattern TPC26 plus tips for handling a tricky fabric.

Firstly, I probably need to give you a quick explanation of why I’m making a fancy frock during the lockdown because it must seem rather incongruous.

This is my first post as a Lamazi Fabrics blogger and before the Covid-19 pandemic reared it’s ugly head I had offered to make an outfit using a slightly ‘tricky’ fabric in order to share a few hints and tips for sewing with it. I selected the beautiful Tencel/Cupro ‘Bark’ fabric in Lavender because we were going to a wedding in late May which would be the perfect chance to make a something using this special fabric. Very sadly that wedding is now postponed indefinitely but I’m making the dress because I’ll still need something to wear when it’s rescheduled. 

The fabric has a lovely weight and handle which makes it drape really well. It’s has a bark-like finish and is different on each side, you could use this to your advantage if you want to create an interesting visual effect by having some pieces with one side out and some using the reverse side. 

I made life harder for myself by choosing the new Bias T-shirt Dress by Trend patterns (generously gifted to me by them) in which EVERY piece except the sleeves are singles and strange shapes which means you cut everything out on a single layer of fabric right side up (RSU). Unlike most patterns, when you are cutting pairs of parts you can usually flip a piece without too much difficulty, however if you do that for a piece which must be cut RSU you would have completely reversed the print/design to the wrong side when you try to sew it up. This Tencel/Cupro has a nice look whichever side you use but my advice is to be really careful on printed fabrics before reversing any piece labelled RSU. 

Next, when cutting slippery or fluid fabrics (unless you have a lovely big cutting table) you’ll need to handle them as little as possible (by which I mean pulling them about to get them into position) which might be easier said than done. I know that cutting out is most people’s least favourite part of sewing but it’s so important to take time and care at this stage. If you’re cutting out on a table with straight sides use the edges as a visual marker to get the end of your cloth at a right angle to start with, ensure the weft (across the fabric) is nice and straight as well as the warp, pull a few threads to find the grain if necessary. If you have more cloth than will fit on the table in one go you could try having the excess rolled on a cardboard tube if you have one to keep it under control rather than sliding off the table all the time. 

Because my pattern has large awkward-shaped pieces cut from a single layer I had no option but to cut out on the floor! This can be physically quite tiring so you might want to get help if you need to. This is slippy slidey fabric so an extra pair of hands could help you lay it up nice and straight, again, rolling the fabric onto a long cardboard tube would also help keep the fabric taut and straight as you lay it out on the floor. This is not a fabric to use weights and a rotary cutter on unless the whole lot fits onto a cutting board without disturbing the fabric, if you’re spending time laying up the fabric carefully so that the grain lines are straight in both (warp and weft) directions you can’t then mess it about shifting a cutting mat underneath it and the pattern pieces need to be secured in place with pins. Cut out carefully moving the pieces as little as possible and try to keep them flat after cutting until you’re ready to sew. All of this will help minimise the pieces stretching out of shape, especially as a lot of this pattern has seams running on a diagonal. 

I felt that the length of the dress would probably be too long for me so I took some of the length out of the skirt pieces before I cut them out in fabric.
I calculated that approximately 5 cms would be sufficient to take out of the length so first I drew a line at a right angle to the grainline, then a second line 5cms from the first.
I pinned each piece to it’s ‘partner’ so that I could see if it would still align correctly after I folded out the 5cms.
It was really just educated guesswork but, eventually, by folding out the 5cms horizontally from each panel I was reasonably confident it would be pretty close.
Why didn’t I just take it off the hem at the end? You could easily do that but because I had just 2.5m of fabric, which may not have been quite sufficient, I could not take that risk so I did it this way instead. It took longer but removed the element of uncertainty.
This is almost everything laid up on the floor, I cut a linen version at the same time which is what you can see on the top. Whilst a single layer is often a very economic way of cutting fabric it’s usually more time-consuming to cut out so I did the two at the same time which was slightly risky but it worked out.

Once I’ve finished cutting out it’s vital to transfer all notches and mark darts and a couple of pivot points so I use old-fashioned tailor’s tacks (obviously you can use a textile marker pen if you prefer, I often do but it’s a pale fabric and I didn’t want to risk any marks being left) It’s a habit of mine to keep all the pattern pieces attached by just a couple of pins to the fabric until I need it, so that I don’t them get muddled. These are curious-shaped pieces so the chance of having them the wrong way round could be quite high! Next I stay-stitched all the neck edges on the machine 5mm in, if you have a very loose weave fabric it would probably be sensible to stay-stitch the bottom edge of the front bodice piece to prevent stretching. If you’re using a particularly fine fabric like chiffon you should stabilise the neck, and any other seams which could stretch, by hand-stitching very narrow cotton tape or ribbon over the seam line on the wrong side of the fabric. When I worked for bridal designer David Fielden many years ago we would cut the selvedges off the silk habutai linings for the seamstresses to use on necklines.

There is just a little fraying on the cut edges which I overlocked singly as I went along, as per the pattern instructions. Whether you’re sewing or overlocking the fabric I strongly suggest you have the whole piece supported on the table in front of the machine rather than feeding up from your lap. This is to prevent the piece becoming stretched as you’re sewing and possibly causing it to become misshapen.

If you find, as I did, that there’s a slight discrepancy between two seams (assuming that it isn’t an error in cutting or adjustment of the pattern) then pin it with the excess on the underside so that when you sew the feed dogs will take up the ease.

You can see the lower layer is a little longer than the top one and by sewing it with this on the underside means the feed dogs should take up the excess.
After sewing but before pressing it looked like this.

My photos should make it clearer, a good press will help steam out some of the excess too. Also, to minimise the risk of making a shiny patch on the fabric make sure you use a pressing cloth, you can often buy silk organza ones although I have a piece of plain fine pure cotton lawn which I’ve overlocked around the edge. I use this when I’m pressing darts or turning points or corners out too.

To sew an invisible zip into the diagonal seam across the back I machined the seam closed but I used a long basting stitch just for the section where the zip will go. This stitching will be removed later.

Line up the teeth with the basted part of the seam, this has been lightly pressed open already.
Pin the zip tape to the seam allowance with the seam and teeth matching.
I prefer to tack the tape to the seam allowance at this point but you could use Wonder Tape if you have it.
Now I removed the basting stitches and sewed the zip in using an invisible zipper foot. The zip I was using was longer than I needed.
Make a new stopper for the zip by carefully sewing backwards and forwards a few times over the teeth, cut off the excess then secure each side of the tape to the seam allowance using a regular zip foot.

Once the zip was in and side seams sewn up I checked the fit on myself. I cut a UK 16 and overall I’m happy with the fit and apart from the length I made no alterations to the bodice. Because I made the linen version first I already knew that the shoulders were a bit too broad for me and the sleeves dangled too much off the crown of my arm. I calculated that I needed to remove approximately 3cms to lift them up to a slightly better position. I found I didn’t need to alter the sleeve head though, fortunately it still fitted into the armhole. Another thing I did decide at this point was that the sleeve needed ’something’ else so I mocked up some small pleats and pinned the sleeve into the armhole to try out the effect.

I mocked up some small pleats with the sleeve pinned into the armhole.
I drew some markings so that I could then transfer the pleats equally to both sleeves.
More old-fashioned tailor tacks to mark the pleats.
The pleats are equally divided across the centre line of the sleeve.

After making the pleats in the sleeves and sewing up the underarm seam I used a ‘pin hem’ to finish the edge. This is similar to a simple rolled hem but even narrower. Begin by stitching a turning of approx 1cm very close to the edge, trim this carefully  

Sewing a pin hem, this is useful technique well worth mastering because if you haven’t got a rolled hem foot which could do the job, this gives a beautiful hem finish to fine or delicate fabrics.
Finished pin hem on the sleeve
Because I’d made the pattern alterations to the skirt length I wasn’t surprised to find there was a slight discrepancy in levels at the hem. Using a long ruler I averaged out a new straight line and then pin-hemmed it.

I love the 1930s/40s vibe of this dress, the drapey qualities of the fabric enhance the bias lines of the skirt in particular. I really enjoyed the challenge of putting the dress together, there are no particularly difficult techniques as such but it’s an interesting puzzle which you’ll need to spend a little time concentrating on, you’ll be rewarded with a striking but really wearable dress.

Thank you to Trend Patterns for gifting me the pattern, there was no expectation to write a review. You can read my previous review of the Square Dress pattern here. The fabric was provided by Lamazi Fabrics in return for a review which is also published on their own website.

I hope you find some tips and advice in here that might be of use to you if you’re thinking of using a fabric that needs a bit more forward planning than you’re used to. Trend have created another beautiful pattern with stunning and unusual details but the pieces cleverly work with the grain of the fabric so that working with the bias cut is a lot easier than it usually is. They have been gradually increasing their size range too so the TPC26 comes in UK sizes 6-22.

Quite a long blog this time so thank you for reading this far and, until next time,

Happy Sewing

Sue

Pfaff Coverlock 3.0

It’s been almost a month since I was loaned a Pfaff Coverlock 3.0 to try out so thought I would give you a ‘half-term report’ on how I’m getting on with it.

First thing to say is that it’s quite a beast! It’s a very substantial piece of machinery and so is fairly heavy as a result. That being said, this is normally the case with coverstitch machines because they are generally bigger than overlockers so the weight isn’t unusual. It does have a good-sized and comfortable carrying handle though.

Ok, so, the Coverlock 3.0 is a combination machine in that it is both an overlocker and a coverstitch machine. I’m sure you already know that an overlocker will trim and neaten raw edges and often sew the seam as well if you have 4 or 5 thread version. What you may not know is that a coverstitch machine doesn’t trim any edges, it will sew two or sometimes three rows of top-stitching on the outside of a garment whilst covering the edge of the fabric on the inside with loops of thread to ‘cover’ it. It has the advantage of being stretchy too. If you’re still not sure what I’m talking about have a look inside the hem or cuffs of a RTW jersey garment and you should see.

The first thing I had to do was not only rethread the machine as it didn’t arrive pre-threaded but I also needed to change it’s function from coverstitch to overlock. A major part of what I want to assess for you is how quick and straightforward it is to go between the functions. This is partly why I didn’t plunge in with a review as soon as I got it because I didn’t think it would be balanced or fair. Indeed, I will certainly write another review in due course after a decent amount of time and usage has occurred.

Yay! I threaded it successfully!!

Because the machine was merely delivered to me without any demonstrations I’ve needed to use the instruction book a fair bit. If you have difficulty following written instructions and/or diagrams this may not be ideal for you but there is a (silent) DVD included with very clear animations of exactly what you need to do for each of the stitch variations possible. [I didn’t find this straightaway though so I muddled through with the booklet! I’ve also since found a few very helpful You Tube videos which were useful]

I’m not going to lie, it does take a bit of time to make the changes because you’ll need to remove and reinsert the needles to different positions as well as thread the machine in different ways depending on the function. This will eventually take me less time and I’ve added Post-it notes to the relevant pages in the book so that I don’t have to keep searching for the two I’ve favoured most. The machine is capable of up to 23 stitches using 2, 3, 4 or 5 threads and up to 3 needles. So far I’ve only used the 4-thread overlock and the coverstitch but I will endeavour to use more, including the flatlock, and report back.

I decided on making a hacked version of the Tilly and the Buttons Nora top which I’ve made a couple of times before as I didn’t want any nasty complications by attempting an unfamiliar pattern with a new piece of machinery!

The beautiful jersey with an amazing ‘tie-dye’ print is from Lamazi fabrics and was my choice as a July/August maker of the month [it could be you if you tag them on Instagram] I cut the sleeve to approximately 3/4 length and also cut two cuff pieces which were again approximate, initially about 20cms in length and then my wrist measurement at one end and my mid-forearm measurement at the other. I added a couple of centimetres for seam allowance to all sides.

I’d definitely say you need to do a bit of forward planning if you intend to use both the overlock and coverstitch functions on a project because of the swapping between the two. For example, on my Nora I needed to coverstitch just the cuffs and the hem, everything else could be sewn either directly using the 4-thread overlock or on my Quilt Ambition 2.0. I opted to sew the top together first and complete the hems at the end, in the usual way although there may be times when it’s better to hem first, we’ll see.

I’ve been very impressed so far with the quality of the different stitches.

If you’re merely changing the thread colours it can be done in the same way as regular overlockers by snipping the threads near their spools, tying on the new colour and pulling each of them gently through, plus rethreading the eye of the needles. On one occasion when I altered the function I completely rethreaded but the stitch was much too loose-what had I done? It was all done correctly and yet it was way too loopy. I checked the manual for hints on troubleshooting but it didn’t make much difference. I was starting to pull my hair out when I realised I had threaded the machine without lifting the handle out of the way-the threads MUST go under it or they don’t sit in the tension discs! (Had I watched the helpful YouTube video first I would have known this…) Another thing I learnt the hard way was when the spool holder kept falling off the back of the machine and I was ready to chuck it out of the window I noticed it has to be slid sideways to click securely in position-doh!

The next two projects I made I didn’t use the coverstitch function as both the sweatshirts had cuffs and waistbands but I constructed much of them using the 4-thread overlock stitch. I used fabric provided to me by Minerva and they will appear on their blog in the new year. One of the patterns I used was the gorgeous Maxine sweatshirt given to me by it’s designer, Dhurata Davies. I’m going to make another one soon so I’ll write an individual blog on it then. [I got both tops out of 2.5m of fabric!]

For the final project I want to talk about here I took a different approach. It’s an Amy top by Brilliant Patterns and which I’ve made a couple of times before. I had a 1m remnant of loop-back cotton sweatshirting which I bought from Sew Me Something at a show for £8 and by shortening the sleeves very slightly, cutting the neckband in two parts and joining it I got a WHOLE sweatshirt out of the one metre!!

This time I set the machine up with a wide 2-needle coverstitch and I used my regular sewing machine to sew most of the seams. What I did at each stage of construction was to press the seams flat and top stitch them using the Coverlock. This meant that there would be two rows of top stitching on the outside and the raw edges were covered on the inside. This was generally OK although as I’ve yet to ‘get my eye in’ with lining up the foot against a seam or other visual marker a couple of them do waver more than I would usually like. It turns out there is a large removable flat bed included to increase the working area (it was tucked down inside the box and I’ve only just found it!!) this will support your work while you sew but it does take up a bit more room.

I like the two-part upper back of the Amy.
The hem is level at the front and a dipped curve at the back.

So to sum up (for now) I’ve been impressed with the quality of the stitches I’ve used so far on the Coverlock 3.0 and I will definitely look for opportunities to try others whilst I have it. I’ve yet to be convinced about swapping between the stitch-types but obviously, as I get more familiar with it, I should get faster at changing between them. There are few processes which have to be gone through to make the changes but I’ll probably work out an order or procedure to follow to speed it up. If you are short of space a combination machine might be useful, they aren’t cheap though. You’ll almost certainly use the overlocker stitches more of the time so possibly changing occasionally to coverstitch will be sufficient. I would definitely say you should have a thorough demonstration of the machine so that you know what is involved and what it is capable of. Unlike washer/driers which don’t do either job very well this machine does both functions to a very high standard.

Thank you to Pfaff for giving me the opportunity to try out their machine and if you have any questions about my experience so far then do ask.

Happy sewing

Sue

French dart shift by Maven Patterns

IMG_4586

This could very well be the perfect dress for the imperfect figure. It sits nicely on the shoulders with smooth set-in sleeves that blouse slightly at the cuff (if you’re going full-length) the French darts give it shape and the slight A-line flare of the skirt skims the body, it has pockets and finally there’s a funnel-neck collar to draw attention up towards the face if that’s your best feature! Oh, and there’s no zip, just pop it over your head!

I bought my pattern from the lovely Mike (son in law of Mrs Maven) who was manning the stand at the autumn Knitting & Stitching show for Mrs Maven who’d had to dash off for a family emergency. He must have done a grand job because I bought a pattern, as did many others while I was there, the samples on display were very enticing.

The French Dart Shift appealed to me because I liked it’s relaxed but stylish aesthetic, there are lots of possibilities. It has 3 sleeve options (plus sleeveless) and you could make it in a whole variety of fabrics from winter-weights like worsted wool or denim, through cotton poplins to softer fabrics like crepe or lace with suitable linings.

The patterns aren’t cheap at £18.50 but they are beautifully produced in a folding wallet, printed on quality paper with a comprehensive instruction booklet. I decided to trace off the pattern onto Swedish tracing paper rather than cut it out-I don’t always do this as I’m not an habitual tracer! I checked my body measurements and then using the measurements chart provided so I went for a UK 14. fullsizeoutput_2154

IMG_4590
This time I transferred the pattern to Swedish tracing paper.

I had a rummage in my stash and found some navy fabric with tiny dots which I bought ages ago in Hitchin market and there was just enough. I didn’t follow the cutting plan as I hadn’t got the suggested quantity but by careful refolding and some single-layer cutting I got everything out.

One detail you need to watch out for is that the seam allowance is just 1cm rather than the more usual 1.5cms. The instructions are comprehensive and thorough although if you struggle with following written instructions this might be a challenge for you. There are illustrations too which are very detailed but they could do with being just a bit larger for those of us who are a bit sight-challenged, I managed but that’s partly because I had an inkling of how it was likely to go together.

The instructions encourage quality details such as taping the neck and pocket edges to prevent stretching (I actually used iron-on tape which fulfils the same job) and reinforcing the joins between the pocket bags and the side seams.

I failed to take any photos during the making, sorry about that, but it all went together as intended. The band on the cuffs is quite narrow and a bit fiddly but it’s worth persevering because the end result looks nice. You could leave the cuff off i suppose and make a channel with elastic through it if you wanted, or you could shorten the sleeve to between wrist and elbow length too.

IMG_4274
the narrow gathered cuff is very feminine

IMG_4273
The collar is cut on the bias which gives it a lovely roll and it stands well on it’s own, there’s no interfacing inside it. If you were making the dress in something more flimsy (like cotton lawn for example) you could mount the collar onto a fine fabric like organza, or a second piece of lawn or voile to give it more body.

IMG_4272
Finished, I actually hand-stitched the hem so that it was nice and invisible.

I finished the navy dress before Christmas-I wore it on Christmas Day in fact, but I’ve only just made a second version recently [a 2 week bout of flu put paid to any creative sewing for a while]

I’ve made this second version in a lovely Ponte Roma I bought from Fabrics Galore at the Knitting & Stitching Show 18 months ago (I don’t like to rush these things) Although Ponte isn’t one of the suggested fabrics it’s worked well but you need to make sure that the wide neck edge is taped to prevent it being stretched before you put the collar on.

I think I can safely say this dress is my ‘secret pyjamas’, it’s sooo comfy!

fullsizeoutput_2159
Whoop, the sun came out so here’s some pictures in the garden. I used the twin needle to turn up the hem on this one.

fullsizeoutput_2160
I chose not to cut the collar on the bias because it’s a slightly stretchy fabric and this has back-fired a bit because it’s collapsing. Never mind, we live and learn, I should have followed my own advice and mounted it onto something else for a bit of structure.

IMG_4598

All in all I’m delighted with this dress and I can see me making several more for the summer. Take a look at the Maven website for more inspiration with fabrics, you could even leave the collar off, and I know Portia Lawrie has produced a colour-block version too which looks fab. I think I’ll investigate some of Maven’s other patterns now too as they look really appealing!

Let me know if you’ve tried any of them,

Happy sewing

Sue