Box pleat shirt from Trend Patterns

I’ve made loads of different clothes over the decades but actual shirts for myself have not tended to be among them. I’m not sure why, possibly because I had to wear boring school shirts for years and years, and for a while I had to wear a uniform when I worked for the John Lewis Partnership so my personal preference has tended to softer blouse shapes. That said, I love to see a crisp white shirt especially when it’s given an inventive twist. It’s a wardrobe staple and yet there’s always room for a new version. 

Lucy at Trend Patterns has just released the first 3 patterns of what will become a shirt collection and each is available printed, as a PDF or as a complete kit with pattern, fabric and trims. TPCSH1 is a feminine Pussy bow top with shirt sleeves and a ruffle hem, TPCSH3 has stunning gathered ‘angel’ sleeves which really make a statement whilst the body is kept simple and traditional so that the sleeves do all the talking. 

Lucy offered me the kit of TPCSH2 to try out, it is a box-pleated front shirt, deceptively simple to look at but those details take a little time to get right. It’s classified as ‘moderate/hard’ and I would agree, not because the elements in themselves are especially difficult but each of them needs some experience and precision to execute so I wouldn’t recommend this as your first shirt project. 

The kit comes with enough good quality plain white cotton poplin to make up to the largest size of a UK 22, along with Trend-branded buttons (a nice touch) and iron-on interfacing. All you need to provide is your own thread! 

I started off by taking my measurements and comparing them to the sizing chart, there is also a chart giving you finished garment measurements too which is helpful because it will give you some idea of how oversized the shirt will be when it’s finished. I made a UK 12 and as you will see from the finished photos it’s a very generous fit, to be honest, if you want a close-fitting shirt then this particular pattern won’t be the one for you. 

I opted to trace off the pattern, there are two separate fronts, right and left, and a whole back plus sleeves, yoke, cuffs and collar. There is no pattern piece for the bias binding for the sleeve placket, you just need to cut yourself two bias strips approximately 30cms x 4cms. The right and left fronts are the same except for the extra on the centre front which creates the folded fly with concealed buttonholes. I traced off one front then, to save some time and to ensure they were identical, pinned it to more spot and cross paper before cutting them out together so that I had a mirror version with the additional front added. It’s really important to trace the front very carefully because of the three box pleats, if they are each a bit off you risk the pleats not sewing together accurately which will leave you scratching your head. There are a lot of drill holes to mark the stitching which will eventually hold the pleats in place, don’t be tempted to miss any out because they are also really helpful when you’re folding and pressing the pleats in position. You could choose to trace just half the back to save paper if you intend to always cut it on the fold anyway but having a whole piece gives you the option to have the fabric out flat, besides, it’s almost always more economical to cut fabric out as a single layer [this can be especially helpful if you ever need to do some tricky pattern placement or matching]

Because the fabric is plain, placing the pattern pieces and cutting out was a breeze-no pattern matching, yay! I spent quite a while making traditional tailor’s tacks for every single one of the drill holes. You could use a washable or some other kind of disappearing marker pen if you are confident that it definitely won’t come back to haunt you but I wasn’t going to take the risk on plain white fabric! 

In the past I’ve occasionally found some of the earlier Trend instructions a bit tricky to follow but the more recent ones have illustrations rather than photos and I found this set very clear. My biggest piece of advice would be to read then re-read the instructions before you start, and to highlight anything that you know you’re going to have to really concentrate on, this isn’t a race after all. 

Constructing the fly front and button stand first, including the buttonholes, was satisfying, I often feel like I’ve run out of steam by the end of any project which requires buttonholes and it’s a bit of a chore by then but this gets it out of the way nice and early. [I should add at this point that I started out sewing with a fine size 60 needle so as not to leave too many noticeable puncture holes in the plain fabric if I went wrong or needed to unpick. However, this size needle kept skipping stitches for some reason so I went up to a 70 and had no further problems]

transfer all markings and instructions to the paper pattern if you’re tracing it off. I made tailor’s tacks through every drill hole

My second piece of advice would be to press your pleats on the ironing board if you possibly can. I only have a small heat-resistant board in Threadquarters which meant I was constantly moving the fabric which was not ideal, it was so much easier on the ironing board because the whole piece fitted on. Do not rush this part, with pure cotton fabric you can have the iron on pretty hot but do be careful of your fingers with hot steam. Pin, tack or Wonder Tape the pleats in position once pressed if you want to. 

pressing the pleats on the ironing board, the snips top and bottom along with the tailor’s tacks will help you get each one in exactly the right place.
In progress-making the bar tacks

The instructions are to stitch down each pleat according to the markings using a few stitches. I did quite a lot of testing using a variety of decorative stitches for this before I committed to the bar tack. The next challenge was getting each of those bar tacks (30 in total!) central over the pleat. My machine comes with a number of feet which are used in conjunction with the decorative stitches and one of these has horizontal red lines which proved very helpful in getting lined up for every bar tack. After making a few of these bar tacks I ‘got my eye in’ so I could tell very quickly where to start each stitch, having the needle stopping in the up or down position is an absolute essential feature on my machine for me and it was brilliant during this, being able to lift the foot to check I was sewing in the correct place without the work shifting was so helpful. The photos will hopefully make my method clearer to follow. It’s vital to take your time and be as accurate as possible during this stage because the box-pleats are the USP of this shirt and it will obvious if they are off-kilter. I sewed in white thread but you could use a colour, or even hand embroider to give your shirt a totally original look.

testing various stitches including triple straight stitch and arrow heads, the difficulty was going to getting every single one central over the pleat

Incidentally, Trend will be creating a series of video tutorials to help so I suggest you check their Instagram account or the website for those. Also, there was a slight problem with pattern markings for the back box pleat which were incorrect. This has been rectified but if you bought a copy very soon after release you might find you have to scratch your head a little, the notches were in the wrong places. Check the website if you’re in any doubt.

the right front, including the fly, taking shape
the shirt with the side seams now sewn up, ready for the sleeves to go in
sewing the continuous binding to the sleeve opening. the instructions don’t call for it but I like to sew across the top of it at a 45 degree angle to encourage the binding to stay on the inside
close up of the finished front
all done
close up of the finished bar tacks

I followed the order of construction to complete the shirt (I usually do the first time I make a pattern) but personally I would put the collar on after making the yoke. I like to do it before the side seams are sewn up or the sleeves are inserted, unless there’s a technical reason not to obviously. 

the finished back yoke
I popped a bar tack in the middle of the back to hold the pleat in place, this hadn’t had a proper press yet

Everything came together really well, I’ve always found Trend patterns are accurately drafted so I know the pieces will go together well without major discrepancies-this is why it’s so important to trace off carefully if it’s your preferred method, if seams or notches don’t match up you won’t know where the fault lies [the same applies to accurate cutting out too] 

The sun came out so we could take some outdoor photos, I’ve paired the shirt with my much-worn Megan Nielsen Ash jeans
is it a bird? is it as plane?…
I’ve pressed the pleat now

Clearly not everyone will want to make a shirt that is going to take a sizeable amount of time to construct, or to launder afterwards for that matter, but if we only made simple loungewear for ever then the art and skill of making our own clothes will be lost, just at a time when so many people have discovered, or rediscovered, the joy of sewing for themselves. There will always be a place for a classic white shirt and Trend has created a small but growing collection with original twists on the genre. The last year has been so tough for small business owners so I really appreciate being given this kit to try out, I wasn’t under any obligation to review it other than share some photos but personally I have no problem with sewing and writing about it. I will always try to give you a balanced view and if I can support a little business by giving them some positive exposure then I will. Alongside that I’m keen to demonstrate that a design-led style doesn’t have to beyond us ‘ordinary’ sewers either, if you like it then sew it! 

I hope I’ve given you some idea of what will be involved in making the TPCSH2, if you’re looking to push your skills on a bit this could be a good project. Maybe you need/want a plain white shirt in your wardrobe [amazingly I didn’t have one in mine, just a couple of short-sleeved ones] I might layer this with a sleeveless tank top over it, or a waistcoat could look interesting. This is a typical cotton poplin shirting but you could use a variety of fabrics, you could have fun with graphic prints or stripes, try something soft like double gauze or a crisp linen? Or what about harvesting the fabric from several well-worn mens shirts to make a more patchwork look. Take your time though and enjoy the process.

I’ve got a long-sleeved T-shirt under it because it was a chilly day and it will be perfect for the day I can return to the V&A. I don’t know about you but I’ve really missed putting an outfit together to go on a nice day out, deciding which of the lovely garments I’ve made that I want to wear and how I’m going to accessorise them. It seems such a small silly thing to miss but I shall be so glad when I can start doing it again.

Most of all, thank you to Trend for giving me the opportunity to try the kit, until next time,

Happy Sewing

Sue

Refashioning-from old jeans to a new jacket 2016

This is an edited version of the original post from 4 years ago. Not all the pictures are here but I hope you get the gist of the jacket refashion. Sue

I’ve never been a great one for up-cycling really, I guess as a former sample cutter I always enjoy the challenge of cutting something new out of fresh fabric in an economic or inventive way. I think that’s probably the same reason I’ve never bothered with quilting or patchwork-cutting fabric into small pieces and then reassembling it in a different order-not for me I fear. Mind you, back in the day we were less concerned about ‘reduce reuse recycle’ than we’ve since, thankfully, become.

Anyway, at the beginning of August, Portia Lawrie announced that her Refashioners 2016 competition for this year would be to turn jeans into…something else, anything you like! Last year’s theme was shirts and I saw plenty of imaginative ideas where mens shirts became dresses, skirts, different shirts and the winning entry was trousers!

Anyway, I was pondering vaguely on the theme (almost entirely driven by the amazing prize-package that was on offer, the prospect of fabric/patterns/sewing books is enough to stir me into action) and thinking that I didn’t actually have any old jeans in the house to cut up-my girls wear way too many stretchy skinny jeggings to be useful and Mr Y is a keen believer in wearing things to infinity and beyond!

However, as luck would have it, Mr Y was having a rare ‘turn out’ and what should I find but TWO pairs of almost identical jeans…except they weren’t denim jeans, they were corded drill (looks like corduroy but not fluffy) Would they do? a quick email to Portia who said she thought they would. Excellent-green for go!

C06550CE-A7F0-4AC1-B050-758F0941709DE50E474D-DC6D-4A0A-A1AD-74C71DD25BD5923A0798-6055-47D0-97CF-8E7C4EC13A0C

The next issue was that they weren’t even blue, they were very similar, very well washed shades of stone/sand/beige…you get the picture? Then I remembered I had a packet of unused Dylon machine dye in indigo-score!

So I set about unpicking the offending trousers…this took rather a long time to be truthful and made a huge mess with all the threads everywhere on the carpet in my workroom, Threadquarters.

I didn’t have a clear idea of what I wanted to make but I knew that the more useable fabric I could harvest the better. Once I’d taken everything apart I had four legs with side seams still intact, two waistbands with pockets attached and two zips removed. I popped the whole lot in the washing machine with the dye and 500grams of salt, you run the hottest cycle and then, when it’s complete, you run the whole cycle again with detergent. This is to remove any excess dye and also wash the machine out too (although the next proper wash I did was a dark one just to be on the safe side) I was pretty pleased with the outcome. The two pairs were by and large virtually the same colour now, interestingly the top stitching on both hadn’t dyed as the thread must have been synthetic, and the zips hadn’t either. That was a pity because I thought I might have been able to use them but they were just different shades of brown now-yuck.

After a lot more thinking, and sketching, I settled on a jacket for myself because I took the view that if I was going to spend such a lot of time on this with not a lot of realistic hope of winning I wanted to at least have something I’m happy to wear!

To work! I had a rummage in my-ahem-extensive collection of patterns to see what I had that might be basis to use. Most jackets I’ve made were years ago so they’re all a bit 80’s tailored but then I came upon a pattern from the 1970’s that my neighbour had given me when she was having a turn out (more recycling?) The jacket in itself wasn’t something I’d wear but I loved the curved bust dart in the front, it was collarless and edge to edge and the back was in two pieces.

All this meant that it could be a go-er. I spent a while fiddling with the pattern pieces and the trouser legs to see what was going to go where. Because I wanted a shorter length jacket that helped, the front would fit on to include the original side seams and the back would go above that with a modification, and the sleeves would come out of the other legs. They were all mostly on grain which pleased me a lot. (When things aren’t cut on the grain or on the bias they can go very wobbly when sewn up)

I forgot to mention that I decided to trace off a new spot and cross copy of the original as it was quite tatty, and I was shortening it anyway.

Because the back wouldn’t fit on without overlapping the front I chose to add a panel in the back so that it became four panels. This isn’t difficult, I just drew on the new seam line where I wanted it, added seam allowance of 1.5cms and a balance mark to the back panel section and cut it off. The remaining new side panel then needs the 1.5 cms added back on plus another 1.5cms for its own seam allowance. The photo should clarify this a little.

Once I’d got the panels sorted I could pin them onto the fabric.

I tried as much as possible to keep things on a proper grain line so that they behaved when I started sewing them together. Out of the other legs I cut the sleeves which I positioned so that the original seams ran straight down them. One of the things I liked about the pattern was the little elbow darts which would give them a cheeky feature.

Another rummage in my stash found me an open-ended zip in blue, I’d decided to tidy up the inside-and make it a bit more individual-with pretty bias binding. I managed to cut front and back neck facings out of what I’d got left from the sleeve leg.

7F7AB174-65DB-4197-A659-5651CA2E7791

Sewing the jacket together was very straightforward after that. I top stitched most of the main seams in part to match them to the originals and to link it all together, this meant I had to put the sleeves in on the flat rather than set-in but they look ok.80754ED9-5190-4641-A097-A74608863C759CC3A98E-A35F-4DBD-84F2-B5D5227BB492C121A135-9D89-4F06-A3D4-90D8E6A9CDCB_1_201_a6388B67D-74AA-46F6-B415-74128E157638

Because the zip was too long it gives an interesting finish to the neckline where there’s a section at the top that doesn’t do up, which I like. I wanted to use the pockets too but I didn’t want them spoiling the outside clean lines so I devised a way of having them on the inside.

128D0B98-4858-40F6-8066-4D410852FB92_1_201_a2C32C344-8E36-49B0-A5F2-55CBD5BD83E5_1_201_a4BFDDFAF-6979-4503-9CFE-8B3623EFEDAF

The lower facings (cut from more scraps) fold up to neaten the bottom edge of the jacket.

I ran out of the red binding but I found about a metre left of the binding I made to go on my favourite dress so I used that instead. I understitched the lower edge in a fluoro-pink thread (just because) and then slip stitched the facing in place by hand so that it didn’t show through on the front. [I put binding on the cuff edges too so if I turn them up it’ll be visible]

I think the internal pockets might be quite useful if I ever go poaching!!

DACE1532-BB41-4ED4-8616-233BC43D8E88_1_201_a5D8FA1F1-E86E-4D08-8774-C4ECE06D878F_1_201_a

The only bits I didn’t find a use for in the end were the waistbands. I thought I might have used them on the lower edge but in the end I decided I didn’t really want the band on it and I wasn’t sure poor my machine could cope with the number of layers that it would have to sew through.

So there you have it, my entry to The Refashioners 2016. I’m really pleased with the outcome, it’s a tad big but that’s fine and it’s totally wearable. I used jeans that were headed to the charity shop (or even the bin), a gifted vintage pattern, binding I already had and a zip from my stash, a win all round I think. Needless to say I didn’t win the big prize but I did get an honourable mention in dispatches. 

The jacket got its first outing in the wild, on the way to the first Sewing Weekender in late August 2016. I’m very happy with it and I’ve had loads of wear out of it. I think it achieved my aim of not looking too much like a thing that’s been made from something else and being not very good in the process. I’ve never really aspired to being designer so I know there will be far more original ideas than this but I want a garment that is wearable and useful to me and no one else. I hope you agree…although you probably wouldn’t say if you don’t!

7684DBF0-91EB-4F54-AA43-4F6B9CFBDA01

If you’re reading this in 2020 (and what a very strange year this has been!) you might have seen me wearing the jacket for my first trip back to the V&A museum in almost 6 months, the wearing of face masks being compulsory. I’m wearing it with a linen Trend Patterns Bias T-shirt dress which I included in a review here. The exhibition is Kimono: Kyoto to Catwalk which I also reviewed earlier in year. My hair has grown quite a bit too!

35ADC246-B2E3-4684-AB23-2072AB6A5DF5

Again, apologies for the gaps in the original photos but I hope you get the general idea of this refashion. 

There are a quite number of blogs and websites out there that can give you ideas and inspiration for this kind of project and Portia’s own is as good a starting place as any, she’s a great advocate of refashioning with so many clever ideas and in 2020 this is still very much the case.

Happy Sewing

Sue xx

 

 

The Frilled Hem Top from Trend Patterns

Trend are fashion-forward indie pattern company based in London and I’ve already used their Asymmetric Dress pattern twice (and reviewed it here) I even wore the first one for the Love Sewing magazine Sew Over 50 photo shoot too because I felt it was such a striking but wearable dress that it deserved to be seen in a national sewing publication!

I made this version in brocade for our cruise to celebrate our 30th wedding anniversary in March…
…and it has a pocket!

The next Trend pattern I’ve decided to tackle is the Frilled Hem Top TPC5 and it’s another goody as far as I’m concerned. As well as the ruffle detail it features some interesting diagonal seam lines (there’s no side seam) The degree of difficulty is described as moderate and I’d agree with that because although the techniques used aren’t difficult you need to keep your wits about you to ensure that you’re attaching the pieces to the right seams, it could be easy to lose sight of which way up they are because the usual ‘landmarks’ like armholes or necklines aren’t so obvious. There are photographs as well as written instructions, which are fairly clear, at the end of the day it’s a simple top and so long as the ruffle goes in first attached to the right pieces then adding the back yoke and sleeves is straightforward. I hadn’t got a suitable zip, I’d thought about using an exposed metal zip but the one I had in my stash was too chunky for the weight of the fabric so I opted for a simple button and hand sewn loop closure instead.

My fabric was a very thin cotton I’d picked up from a swap sometime ago-I couldn’t really say what it is as it isn’t soft like lawn, or sheer like voile, it’s slightly more crisp like poplin but less weighty. Whatever, it’s worked just fine for this and it didn’t cost me anything!

As I was making the top at this year’s Stitchroom Sewcial I was fortunate to be able to use the industrial rolled hem machine to finish the edge of the ruffle, it’s super-quick and neat and took me about 30 seconds to hem the whole piece instead of my usual pin-hem finish which would take at least half an hour!

As I didn’t have much fabric, plus I wanted to wear it as a summer top, I cut the sleeves down to short length. I was a little concerned that they looked like they may be a bit snug on my not-very-slim arms, the bicep measurement seemed to be ok but the crown looked narrow. I decided to go ahead and insert the sleeves and actually they are just fine as you can see from the photos. As there is no underarm seam to match the sleeve to it’s vital that the shoulder/sleeve head notches are marked or you’ll struggle to insert them properly. I’ve made a straight-from-the-packet size 14 again and the fit is spot on for me with no alterations, it’s a good fit across the shoulders and upper chest area and then flares out over the hips.

There are two points in the instructions which are useful and important to follow. The first is very simple, it tells you to ’sink stitch’ (that’s what it always was until ’stitch in the ditch’ became a thing) through the shoulder seams to hold the neck facings securely in position, this is both quicker and more effective than hand stitching them down I always think. The second point is that you can’t sew the whole hem up all in one go, you’ll need to sew the centre front section, stop, move the frill out of the way and then recommence the rest of the hem. If you don’t you’ll just sew over the frill which will look terrible.

You’ll need to sew the hem between the frills separately to the rest of the hem, moving the frill out of the way.
I finished off the neckline with a button and loop.
I love this detail where the frill, the back and the side all meet.

So that’s the Frilled Hem Top, it should probably take around half to a whole day to make, it took me longer because I was nattering at the Sewcial quite a lot, and then I made a super-quick Mandy Boat T-shirt using the industrial coverlock machines in between too.

This was my other Sewcial make, the Mandy Boat Tee which is a free pattern from Tessuti. I’ve made it in a gorgeous jersey form Lamazi Fabrics which I’ve learnt was recently discontinued.
If you’re interested in the jeans they are Megan Nielsen Ash which I tested nearly two years ago and I LOVE wearing.

The TPC5 takes a little under 2 metres of fabric, probably less if you’re making it sleeveless or short sleeves. The size range isn’t extensive, 6-16 UK sizes, and they aren’t the cheapest but I’ve been very happy with the two I have and I’ll definitely make some more variations of this particular pattern. You could create some really interesting looks by using contrasting fabrics or colours, or leave out the frill completely to show off the unusual seam lines?

Trend have a wide range of patterns now, which don’t necessarily appeal to everyone but I think they are well worth a look at because of their unusual styling and details. They may look scarily fashion-forward but if you want something which is less predictable and run-of-the-mill in a sea of ‘meh’ patterns then, in my unsolicited opinion, they are a good bet. They often have a flash discount offer too so keep your eyes peeled for them!

Until next time, Happy Sewing

Sue

Sewing makes of 2018

I think this is a fairly comprehensive album of my makes in 2018, most of them have been worn a good number of times although not all were for me.

When I look back like this I realise what a busy sewing year 2018 was ( and a bit of knitting too!). Also, there seem to be a LOT of dresses and tops but very few skirts and trousers! I think this is definitely as a result of me gaining weight in the last two years and feeling self-conscious so, with the exception of my Megan Nielsen Ash jeans from autumn 2017, I really haven’t wanted to make close-fitting clothes.

I’m addressing this now, with some success so far, but the other truth is that I like wearing looser-fitting clothes anyway, although hopefully I can go down a size or two when I make them in future…time will tell.

Some of the garments you see here have been worn loads since I made them whilst others were less successful. Sometimes this was bad fabric choices, sometimes they didn’t suit me after all, also the weather became so hot that I didn’t wear the heavier items as much as I expected at the time.

I tend not to set myself up for ‘sewnine’ or other year-long initiatives because I’d rather see what takes my fancy as time passes, or whatever gap I feel needs filling. I’ve really enjoyed making a few jackets and coats this year and they have all had a good amount of wear, they aren’t something I’d done much previously. I’ll be making a couple of posh frocks soon because we’re going on a cruise in March which will need a few fancy threads in the evenings, I’ll be taking old favourites like the Maker’s Atelier Holiday Shirt and New Look 6351 trousers, and Papercut Moana to keep cool in during the day though.

Have you got sewing plans already for 2019 or are you more like me and just see what takes your fancy? We’ve got the new series of the Great British Sewing Bee to look forward to very soon and I’m sure that will inspire even more people to take up this brilliant activity with us! Dressmaking is an activity anyone can try fairly easily these days and there is so much inspiration, help and encouragement out there too, in a way it never was when I was first sewing.

I can’t wait to see the two blockbuster exhibitions at the V&A next year, Dior: Designer of Dreams opens in February and Mary Quant in April so there’s lots to look forward to there. It’s well worth considering membership this year I’d say, I’ve had excellent value-for-money from mine these past four years. [alternatively, Art Fund is also worth considering if you don’t live near London because that gives you reductions to lots of galleries and museums all over the UK, including the V&A)

I’m also looking forward to seeing a lot more SewOver50 activity from all over the world too, have you joined yet?

Maybe our paths will cross in 2019 and we can talk sewing together in real life?

Until then, happy sewing

Sue

Rounding off Me Made May

Did you take part in Me Made May? At the outset I pledged to try and wear at least one self-made garment every day during May and, by and large I achieved that. I say ‘by and large’ because although I definitely wore a me-made item of clothing every day there was the odd occasion when I failed-or couldn’t be bothered-to take a decent photo!

The first few I managed by balancing my phone on top of a loudspeaker and setting it on a 3 second timer. This proved imperfect and the novelty quickly wore off when it fell to the floor for the umpteenth time!

Anyway, here goes…

IMG_5623
May 1st was a mash-up pattern, bodice of one, skirt of another, in Queue for the Zoo Liberty Tana lawn worn with a Jigsaw sparkly cardigan.

DE725048-B647-4F70-AD58-71F60869697E
Day 2 was a Burdastyle magazine top made in a floral scuba fabric and the back in crepe-back satin. I made it at least 2 years ago but haven’t worn it much as the cuffs were a bit flappy.  By the time I wore it to the first London Stitchers meet up that evening I’d taken them in considerably and I was a lot happier with the fit of the sleeves. The jeans are the Ash pattern from Megan Nielsen which I’d had the pleasure of testing and I’m a huge fan of them.

Day 3 is the first newly made garment and it’s the Farrow dress from Grainline which I wrote a review for in Sew Now magazine 18 months ago. I made this version in navy and burgundy linen with short sleeves.

 

Neither of the next garments were new either, the red broderie anglaise was amongst some fabric I was gifted and was already cut out, I just sewed it together. The blue and white was self-drafted 2 or 3 years ago in a cotton/linen mix fabric and it’s a summer favourite of mine.

 

The georgette kaftan is new and was the try-out version of my most recent Simple Sew make for their blog.

The stripes is also the same Burdastyle top but in a striped jersey and with short sleeves. I’d didn’t like it much as a regular T-shirt but it’s been great as exercise wear!

 

IMG_5855
Dragon dirndl, no pattern just pleated into a narrow waistband.

Awesome dragon pattern-matching and zip insertion even if I do say so myself! Bias binding and hand-sewn hem too.

IMG_5898
Colette patterns Moneta in striped jersey with a dodgy waist (should have put a belt over that!)

IMG_5916
One of my favourite tops, Imogen by Sew Me Something and the trousers are Butterick 6461 which I reviewed in Love Sewing magazine last autumn.

IMG_5944
Striped Camber Set from Merchant & Mills worn with a refashioned skirt that used to be jeans.

IMG_6060
More refashioning with a silk top made from a vintage dressing gown and a hoodie using a vintage 60’s pattern in jersey and cotton fabric harvested from a charity shop dress.

IMG_6066
A blouse made using a vintage 70’s dress pattern in ‘Gallymoggers’, an Alice in Wonderland Liberty Tana lawn. This is a couple of years old too.

IMG_6115
Surprised this one still fitted me! Cotton poplin from Ditto fabrics, Butterick 6026 Katharine Tilton pattern and vintage buttons. Refashioned denim skirt again.

IMG_6126
One of my favourites, African waxed cotton with crazy diagonal stripes Simplicity Project Runway pattern 2444, all fully lined.

IMG_5104
Love the button on the back of the neck too, it was a single one of this design in a Sewing Weekender goody bag.

IMG_6128
Packing for our trip to Assisi, all self-made except the cardigan.

IMG_6176
With my new car! Trusty Holiday shirt from The Maker’s Atelier in Swiss Dot and newly made checked linen trousers New Look 6351-I’m so pleased with these, they’re perfect in warm weather if your legs are still pasty like mine. (Awesome pattern-matching too but you can’t see that)

IMG_6254
The new Farrow got to go to Italy.

IMG_6285
Linen trousers again and the Holiday shirt in Liberty cotton voile, outside Santa Chiara, Assisi. Loving my holiday chapeau too, from Monsoon

IMG_6310
Camber Set hack in beautiful Roberto Cavalli cotton lawn and new for the Assisi trip(RTW trousers this time)

This top was drafted from a RTW one and I extended the shoulders to form sleeves. It’s sheer georgette with a slightly sparkly stripe which I get from a market and worn with a RTW camisole underneath. I made it 3 years ago but it’s been a real favourite.

The next ‘make’ is a big old cheat because it’s the etchings I made not the clothes! I loved my visit to Sudbourne Printmakers in Suffolk, and the sewing connection was meeting Chrissy Norman the tutor at the first Sewing Weekender two years ago. take a look at her work, it’s beautiful.

IMG_6406
One of my finished prints…I’m rather proud of it…

IMG_6413
Linen Imogen again with a jacket refashioned from 2 pairs of Mr Y’s trousers!

 

This is only half new-I made a top from this lovely broderie Anglais I bought at Walthamstow market last year but I hadn’t bought enough and it was too snug around the hips. Luckily I managed to get a bit more so I unpicked and started again. This time I used the top half of my favourite Holiday shirt and used wide elastic in a casing under the bust to give it some shape. There was just enough for sleeves this time. I used a ‘daisy’ bias-binding to finish the neck edge and opening.

Not everything I’ve made has been an unqualified success and this teal blue dress is definitely one of the disappointments! It looked lovely on the packet but the back is ridiculous because the zip bulged out giving me a strange hump so I took it out again and inserted it in the side seam instead. Frankly it’s not much better. The top is far too wide and the V neck flaps about undecided whether it’s a V or a fold-back revere. The fabric was super-cheap from Walthamstow again but it’s the amount of time I spent which makes me grumpy. I might turn it into a skirt…

And so to the last outfit of the month…

IMG_6516

The top for my last outfit of the month was originally a dress but, even though I’d made one previously for winter, this version just wasn’t right. The length wasn’t flattering and the sleeves, which had decorative darts, were too tight. After a bit of a refashion which removed most of the skirt, put short splits in the side seams at the hem and took the darts out of the sleeves making them a bit more floaty it was much more wearable. There were pockets in the side seams which I wanted to keep so this governed the length overall. I wore it with my trusty Ash jeans which I’ve absolutely loved since making them last autumn.

So to sum up, Me Made May encouraged me to really look in my wardrobe and get out some of the things which get worn less often, as well as the favourites. The weather has ranged from freezing cold to boiling hot and I realised that my summery dresses are rather lacking when it’s warm, and cooler plain bottom halves are needed to go with my many patterned tops. I know I’ve been prolific in the last 3 years or so compared to a long fallow period for years before that and that makes me very happy. Looking through the clothes I’ve worn during May the vast percentage are things that were made more than a year ago, a lot are more than 2 years old and some older than that. Even when I used to buy more clothes if there was a garment I really liked I kept it for a long time, I think probably because if I’d taken the time to choose it then I wanted good use from it-££ per wear and all that. The same is now true of my makes, I’ve invested my own time into making them so I want to enjoy wearing them (although it’s frustrating when they aren’t a success, but I’ll often refashion them if I can)

Did you join in with Me Made May and did it encourage you to to make more use of your self-made clothes?

Happy Sewing

Sue

Ash jeans, a brand new pattern from Megan Nielsen

Last year I pattern-tested the Karri dress by Megan Nielsen (or at least I did but a bit after the event) I enjoyed the process because I just love and am fascinated by garment construction so the chance to be in at the beginning of a pattern coming to market is great. When I got an email last autumn requesting testers for a new jeans pattern from Megan Nielsen I was really keen to give them a go because I haven’t made jeans before and, this time round, the timing worked for me because I’d finished all my major bridal alterations for the summer and could concentrate on my own projects.

Initially there was a slight delay due to some technical issues before the pattern was released to testers so in the interim I’d bought a quantity of black stretch denim from Backstitch near Cambridge which I hoped would be enough-I guesstimated at 2m based on other jeans patterns I’d seen.

When the pattern arrived it had even more options than we were told it would have originally-there were skinny, slim, flared and wide-leg options. The instructions are nice and clear about exactly which pages you need to print off for the options you want so that you don’t print more pages than needed. Also these days I don’t print off the making instructions, I just keep them on the laptop and read them directly off the screen, I actually find that a little easier to ‘comprehend’ them that way too, maybe it’s because the instructions and illustrations are that much larger than in print? If you have difficulty with making sense of instructions why not try this method with PDFs to see if it works for you.

After initially thinking I‘d go for the slim leg I eventually printed off the wide legged ones-I was concerned that they might be too tight on my legs (vanity) more on this later. 

Ok, so I printed off the wide-leg version but they looked way too wide-I’m only average height and dumpier than I’d like to be so I didn’t want to look like Pop Eye in  his matelot trousers! Rather than reprint the slim leg (stingy) I eventually folded out some of the width at hem level, fading it into nothing by the mid-thigh. One of my observations in the feedback was that the lines became quite indistinct between sizes on the waistband-I feel that they would be better ‘nested’ into groups so that there could be bigger gaps between them, it will be interesting to see if this happens. There’s a wide range of waist sizes included in the Ash so most people are quite likely to be able to use it.

The pattern was very straightforward to piece together, either I’m getting better at this process because I’ve done it a few times now or maybe the first PDFs I did were more complex anyway, this one was simple. Cue cutting, sticking and more cutting. Fortunately for me the quantity of fabric I’d bought was just enough, obviously there’s no nap to worry about on denim so the pieces can interlock well although the curved waistband is all in one piece so it just squeaked in {if it hadn’t fitted in one piece I would have cut it into two at the CB like mens trousers have, this enables a better fit and can be useful on women’s trousers too if you’re having difficulty getting a good fit into the small of your back}

Construction starts with the zip fly. Part of the reason I wanted to try jeans is because it’s been absolutely years since I made trousers with a zip fly and I don’t remember them being a huge success!

I found the instructions very clear and meticulous with helpful diagrams, as I said earlier I followed them on the laptop so I could scroll up and down as much as I needed to so that I knew exactly what to do at each step. Ok, so this is going to sound like bragging but it really isn’t….I didn’t make a single error whilst doing this stage and I give full credit to the quality of the instructions. You could argue that’s because I know roughly what I should be doing but I don’t think that’s all it is, credit where it’s due to the writer.

IMG_3800
although it looks like the top of the zip is going up too high because it’s a bit long this isn’t a problem. There are very thorough instructions for the zip insertion, including how to sew over a metal zip-something I would normally never recommend.

IMG_3799
It doesn’t look level but that’s just the camera angle. I’m pretty happy with the two rows of stitching-I deliberately chose matching thread in case my parallel lines wobbled!!

After the zip is in you make the front pockets-I lined mine with a contrast fabric-and that was very straightforward. Much as I love my trusty Elna 7000 it’s getting on a bit now and really doesn’t much like topstitching thread so doing the topstitching proved frustrating and problematic. (I’ve bought a new Pfaff Quilt Ambition 2.0 since making these and I’m delighted with it) I fiddled with the tension a bit and eventually I got a decent quality stitch but it isn’t perfect on the underside. Incidentally I used a denim/jeans needle throughout (it’s just occurred to me that there are top stitch needles too so maybe I should try that next time)

Next the patch pockets go on the back. I chose not to do any fancy stitching designs or topstitching (partly because my machine was struggling so much with the thread) and just kept it simple.

fullsizeoutput_1f30
certainly not faultless (the top edges peeping out annoy me slightly but they’re at the back so I can’t see them anyway!)

I’ve made a second pair of Ash more recently and I slightly altered the way I did the top of the pocket.

IMG_4872
Instead of rolling the top of over twice as per the instructions I folded it like this so that the first fold is WS together and then the second fold is RS together meaning the raw edge is still showing at this point. I stitched it down just inside the seam allowance to hold the fold in position.

IMG_4873
Next I turned the folded corner out like this so that it’s nice and neat. I then sewed the patch pockets on in the same way as the denim pair but now there’s no annoying sticky-up bits showing.

fullsizeoutput_1f25
the waistband sewn in position, along with the belt loops

After trying the jeans on again I was still not happy with the width of the leg that I’d cut so, because the inner leg seams are double top-stitched, I skimmed in some more from the outer leg seams (this is becoming a habit, see my Love Sewing trouser pattern review here

IMG_3831
Very indecisive!

Eventually I got to a leg-width that I was happy with and after that it was just a case of hemming them. You might look at the finished photos and think “well they don’t fit that well” but frankly I don’t care because I’ve struggled at times in my life to feel comfortable and confident wearing jeans at all because there are so many idealised images out there of what a woman ‘ought’ to look like in them, they should be tighter here, they shouldn’t wrinkle there etc etc blah blah blah….I’m comfortable and happy in these as they are, it’s my body shape that would have to change drastically and it isn’t going to any time soon. Rant over…

Finally the waistband needs a jeans button and a buttonhole. The instructions helpfully pointed out that the buttonhole should be round-ended (not something I’d ever paid much attention to on RTW jeans) and making such a buttonhole on a domestic machine is usually very tricky because of the thickness of fabric involved. Megan suggests doing it ‘freehand’ with a zigzag stitch so I had a few practices at this. Eventually I felt brave enough to do it on the actual waistband and it turned out passably well. My new machine seems much better at buttonholes-it should do, it cost me enough!

IMG_4145
A little bit scruffy but it’s behind a button anyway…

The jeans button is the sort with a rivet or stud behind it so it’s a case of banging them together through the fabric with a hammer! Don’t do it on your best table, put it on the bread board or a towel folded several times.

IMG_3830
Ta dah!

I’d been trying on the jeans periodically as I went along and they felt great. Personally I’m delighted with how well Ash fit me! They are snug and comfortable around my waist and hips and I’m really really happy with them.fullsizeoutput_1f79IMG_0037

fullsizeoutput_1f77
Sorry about the butt-shots but I’m so pleased with how well Ash jeans fit, particularly in the back waist.

fullsizeoutput_1f73
impatient with the photographer face!

fullsizeoutput_1f5e
still a bit cheesed off but it’s all about the jeans folks…

fullsizeoutput_1f89
Teamed with my Refashioners 2017 McQueen-inspired jacket

By the time you’re reading this the Ash jeans will have been released into the wild so you’ll be seeing lots of different versions of them all over the place. I’ve since bought some stretch cord and made another pair, I left the legs a bit longer and a bit wider this time. I’ve worn the denim pair constantly because they’re so comfy, the denim has just the right amount of stretch.

fullsizeoutput_220c

IMG_4824
Compare these photos with the previous newly-minted jeans and you’ll see just how much I’ve lived in them!!

I liked the fit of the legs (eventually!) and because the pattern provides 4 leg shapes there’s bound to be one that you’ll like, I like the on-the-waist fit too.

If you’re looking for a new sewing challenge then jeans might be just the ticket, there was a lot of jeans-sewing going on during February and March so there is plenty of inspiration out there. They are definitely a slow-sew which you might need to break down into bite-size chunks, they need concentration at times, and a certain degree of sewing ‘comprehension’ because they aren’t for complete beginners. I felt the quality of the written instructions and diagrams was excellent and there will be online tutorials available eventually too. It’s also worth mentioning that I found 1 reel of topstitching thread isn’t quite sufficient because there’s only 30m on a regular-sized reel of Gutermann, which is what I used.

I was provided with the pattern at no cost but I bought my own fabric and received no payment for testing the Ash jeans, and as such all the opinions expressed are unbiased and entirely my own. I’ve just bought some more blue denim to make a cropped length next!

Happy sewing,

Sue