Did you keep any of your old college course work? I am by nature something of a hoarder but even I was surprised when an unpromising cardboard folder came to light recently while we were having a grand clear out. It said “Russia 1980” on the outside so I was excited to think that it contained some memorabilia from my school trip of that year [The trip caused some local controversy at the time because that year the USSR had invaded Afghanistan just a matter of weeks earlier and some people felt we should no longer go. Our Head Mistress, the doughty Miss Pagan, was having none of it so we went regardless! Many countries boycotted the Moscow Olympics later that year in protest…about the invasion, not because my school trip went ahead]
I digress, upon opening the folder I found it contained nothing of that trip at all but it did contain many of the sketches and designs I produced whilst at London College of Fashion between 1983-85 including the final project when I produced two ‘mass market’ bridal outfits. Well what a trip down memory lane they proved to be! It was a period of my life when I was so happy with what I was doing, I’d finally found the right course for me (technical garment construction and not just design) I had a great bunch of college mates, I loved it.
I’m sharing the sketches partly because then I’ve documented everything for my own reference and enjoyment, but also because I hope there might be things of interest to others as well. Fashion-wise the early eighties were a time of puffball skirts and massive ruffles, enormous sleeves and ra-ra skirts, wide collars and even wider shoulder pads! Princess Diana was the style darling of the fashion magazines and whatever she wore became a trend. Last year I shared lots of press clippings and photos from my early working career which you can still read here.
What follows are the design and development sheets for an evening wear module [you can see now why it’s my first love when it comes to making] We had to design variations of similar dresses and gowns to illustrate how a garment could be adapted and simplified to cater for it’s appropriate market.
For my final project I opted to make two bridal outfits, I’m guessing they were mid-range and the jacket and skirt was probably intended as a register office outfit whilst the ‘Laura Ashley” dress and jacket was probably for a simple church wedding or registry office. I had a real client for the suit which was my then-boyfriend’s sister. This was handy because she paid for the fabrics for it, the jacket and skirt were white crepe-back satin and the blouse underneath was a soft green georgette. I think my ‘brand’ was possibly Jacques Verts who specialised in smart workwear for the modern working woman (definitely power shoulder pads with everything) or mother-of-the-bride type outfits with matching everything, dresses, jackets, hats, bags, shoes, the lot.
Laura Ashley were hugely popular in the Eighties with their feminine and floral styles, they also produced a range of dresses for brides and bridesmaids at reasonable prices so that will be why I picked them as my brand for this project.
Well, there we are, another wander back into the past for some Eighties fashion extravagance. You’ll see why I probably won’t embrace the current trend for wide collars because I did them the last time around (although fabulous sleeves will always hold an attraction for me) we were all busy being New Romantics but that Steve Strange eye make-up was difficult to pull off with glasses!
I seem to be constantly attracted to teal/turquoise/duck egg shades recently so this Art Gallery organic cotton jersey for my recent Minerva post looked perfect when it hoved into my field of vision!
I’ve used Art Gallery knit fabrics in the past and the designs and fabric, whilst fairly pricey, are lovely quality. This particular jersey is an organic cotton (with a little Elastane) and very soft, a lighter weight than many so it would be good for children’s and babies clothing as well as adults. I love the print, I think it’s a vaguely ‘Tribal-esque’ graphic stripe and I quickly decided to make a Tabitha T-shirt from Tilly and the Buttons book ‘Make it Simple’ which I’ve made a few times before but to try out the dress hack version for a change this time.
I traced off a new copy of the pattern using the horizontal lines indicated across the bodice specifically for the dress. I’m not long in the body but I thought it looked a little short so I added an extra 2cms to the bodice length. In truth I probably could have added more than that because I feel there isn’t as much blousing at the waist as there seems to be in the photo in the book [If you know, or suspect, you have a long body length then pay close attention to this before cutting your fabric, get someone to take your nape to waist measurement and compare it to the back pattern piece. If necessary then add any extra through the horizontal ‘lengthen/shorten’ lines, and don’t forget to do the front as well!] If you’re wondering why this matters, it will mean that the waist seam sits too high above your natural waist and could look more like Empire line.
I followed the instructions in the book to draft my own skirt pattern which was simple enough, you only need one because the front and back are identical (you’ll need a decent sized piece of paper to do this) I cut the new front and back as complete pieces so that I didn’t have to cut anything on the fold, I also wanted a short sleeve so I traced one off.
The fabric was a little bit curly at the edges so I took my time cutting out, be careful not to pull or drag the fabric at this stage because this could result in twisting of the finished garment. It’s helpful to mark stripes onto the pattern so that you can then match them to corresponding seams more easily. Cutting a single layer of fabric can really help make this more straightforward, and be less wasteful too.
Moving on, the suggestion for the waist casing is to use eyelets or buttonholes. I used a small round-ended buttonhole, whichever method you choose make sure you interface underneath first to stabilise the fabric. I used the quilting guide to help me sew an accurate 2cms seam to create casing. Once I’d sewn it I used a bodkin to thread the ribbon through.
The rest of the construction was pretty quick because I already knew the T-shirt in size 5 was a nice fit, the skirt was a bit ‘hippy’ though so I took some off in that area. Following the drafting instructions the pattern piece is shaped for the waist but, for me, a straight rectangle would suffice.
The length was educated guesswork but I’m very happy with it and it’s not too restrictive at the hem, any longer or narrower and the skirt might need a split in it to allow movement. I have the advantage of using a Pfaff coverstitch machine to hem the sleeves and skirt but a twin needle or a zig-zag stitch will do the job too, and don’t forget to use a ballpoint or jersey needle. I used a narrow grosgrain ribbon in a toning teal to slot through the waist casing to complete the dress. As I mentioned near the beginning I might add just a little more length to the bodice next time but otherwise I’m really pleased with this Tabitha dress, it will be comfortable to wear for everyday and easy to roll up in a suitcase if I ever get to go on holiday again!
Minerva provided me with this lovely fabric to write about, I’m delighted with the quality and I’m especially happy with the dress which is so just comfortable.
Two years ago I wrote a review of the Sewing Revival Heron dress which you can still read here. I liked the pattern so much that since then I’ve made another knee-length version in a viscose/linen mix fabric from Ditto in Brighton and a blouse variation too in a beautiful soft Italian cotton voile, also from Ditto. I wore it often although not so much lately…
While I was at Sew Brum in October 2019 I bought some lovely soft brushed printed viscose twill from Barry’s Fabrics with the express intention of making another Heron but this time making it longer and more cold weather-friendly. There had been a lot of Wilder Gowns by the Friday Pattern Company popping up everywhere at the time, I liked the tiered style a lot but I knew I could create my own take on it by using a pattern I already had. A multiple-layered skirt like this isn’t difficult, it’s really a case of working out the number and sizes of rectangles you want to use. If you take a look at this post I wrote about recreating a sun dress for a client in 2019 you’ll get the gist. Because I like the top section of the Heron so much I decided this was a good pattern to use and it wouldn’t be difficult to adapt it to what I wanted.
All the quantities and proportions I have used for this dress were completely arbitrary and had to be based primarily on the quantity of fabric I’d purchased [which I can’t actually remember as it’s well over a year ago, probably 3m of 150cm wide fabric I’d guess] and my own height of 5’5” so bear this in mind if you decide to have a go yourself. I wanted the dress to be nice and long so eventually I settled on approximately hip length for the bodice, the finished length of the side seam is now 40cms. I folded the front and back dress pattern sections up out of the way when I pinned them to the fabric (obviously you could trace or print off a new copy of the PDF if you wish) Once both bodices, sleeve and pocket pieces are on the fabric [pockets could be cut from something else if you’re a bit short of fabric] I could see exactly how much I had left to create the skirt from. I kept it very simple and divided the remaining fabric into two equal rectangles across the full width, each one measured approximately 56cms long but that had to include the seam allowance at the top and a hem at the bottom.
Initially the construction of the dress followed the normal method up as far as putting the pockets into the side seams of the bodice as per the pattern.
Making the skirt was very straightforward, I joined the short selvedges to one another [if it’s a one-way design make sure the print is running the same way on both pieces] to form a large cylinder of fabric with two side seams. Press the side seams open, if you’ve been able to use the original selvedges they might not need finishing. I made the hem at this point too, it seemed easier than wrestling with a complete dress at the end, although this could have backfired on me if I hadn’t been happy with the length but I was pretty certain it would be OK.
I ran two rows of gathering stitches within the seam allowance of the top edge, I pinned them in position matching the side seams, centre front and centre back, plus the quarter seam positions too. Gather up carefully so as not to break the threads, small pleats would also work here especially if the fabric would be bulky otherwise, it depends a bit on the weight of the fabric to some extent. Once I was happy with the gathering distribution I sewed the skirt on and overlocked the seam.
And that was it. Now, I have to say that because I was taking a risk with proportions and limited by the quantity of fabric I’d bought that if I were to repeat this I would definitely make the bodice quite a lot shorter and make the skirt from more than one gathered tier instead. I’m happy with the overall finished length but I think the seam at the hip isn’t quite right. But, by wearing it with a narrow leather belt (there wasn’t any fabric left for a self-belt anyway) and bringing it in at the waist I’ve saved it, the belt gives it a lot more definition.
I added a tie at the neck this time using a bit of grosgrain ribbon which I had knocking about.
The dress was finished around a year ago and these photos were shot in the autumn but it’s taken until now to write up. I just wanted to demonstrate how easy it can be to make your own version of popular patterns using one you already have-there’s a certain risk involved because it might not be completely successful but that’s always the risk anyway when making our own clothes-a style might turn out not to suit us after all, or we make a wrong fabric choice, or it could be a triumph so why not revisit what you already own before buying another pattern?
It’s been such a tough time for so many and being a part of the wider sewing community has been a very real lifeline for many people. Those of us that enjoy making our own clothes already realise the obvious benefits this can give us; total freedom to choose types, colours and patterns of fabrics as we wish, the ability to emulate high-end or high street fashion at the price-point we can afford and the skill to make clothes fit our own particular body type, to name but a few. It shouldn’t then come as a surprise that the wider world, whilst searching for activities to entertain and occupy them during the long weeks and months of lockdown, discovered (or rediscovered) that home sewing can be creative, absorbing and rewarding which is a VERY GOOD THING! Who knew there was a link between doing a creative activity and a more balanced sense of well-being??
To be honest it doesn’t matter what that activity is, or whether you’re really any good at it, the fact that it can take your mind away to other less stressful places for a time is what matters.
But at the start of the year none of that was of much interest to most. I was extremely fortunate in January to go on a cruise to the Caribbean so I made a couple of new things to fills ‘gaps’ but mostly I took old favourites…cue multiple photos of 3 versions of The Maker’s Atelier Holiday shirt on heavy rotation! One new item was the Trend Square dress I made in fabric given to me by Dibs from Selvedges and Bolts the previous year, I got a lot more wear later on in the summer.
Within a couple of weeks of getting back, Judith Staley and I hosted the very first Sew Over 50 meet-up in London. We very much hoped, and expected, that it would be the start of many more such meet-ups between followers of the @SewOver50 account all over the world but it wasn’t to be…not yet anyway.
If you’ve been reading my blogs for a while you’ll know that as well as meeting up for sewcials with fellow sewers I really enjoy my visits to exhibitions and galleries. At the end of February I caught up with Janet Poole who is a fellow Lamazi blogger at the Stitch Festival in London, I had such a lovely day shopping and chatting with her, and her friend Great British Sewing Bee winner Juliet too. We didn’t realise it then but we were very fortunate to be able to attend the event at all and I wouldn’t be surprised if others who went didn’t catch the-virus-that-shall-not-be-named because it was so crowded.
About a week after this I was able to go to the stunning new Kimono show at the V&A and, although we didn’t know it at the time, that was to be the final outing for several months…
So then we entered the first long lockdown and that’s when sewing (and some baking) became my primary occupation. During this time I had some blogging commitments for Simple Sew Patterns and Lamazi fabrics to complete. For my first Lamazi post I made a Trend patterns Bias T-shirt dress which was a tough make, not because the pattern was difficult but because I was making the dress for a wedding that never took place. And worse than that, I was making the Bride’s gown too so I still have an almost-finished dress waiting for the day that the wedding can happen.
I know I’m very blessed in that I have little to actually complain about in my life but that does not mean that these months of lockdown didn’t take their toll mentally so, when the call to help make scrubs came, it was something I could actually do! Eventually I made 10 sets, I believe they were headed to a maternity department in a London hospital.
I continued to keep busy by doing a few refashioning projects because the desire to make new things that weren’t going to be worn outside the house was just too depressing. I love the act of making clothes, the planning, the cutting out, the sewing, because that was taking my mind off what was happening in the real world but how could I justify making new clothes that I had little use for? Even dressmaking was starting to become a negative because I felt guilty about it. By doing some refashioning projects using things I already had, other than new fabric, I made a few items including pyjamas for my final Simple Sew post and another pair using the PJ pattern in the Great British Sewing Bee book written by Alex and Caroline of Selkie patterns and for which I had made a couple of samples. I used 4 old work shirts of my husband’s which were very well worn! I also made (eventually) two pouffes as well which took care of loads of scraps and off-cut furnishing fabrics and were extremely satisfying! I also refashioned a very old and redundant heavyweight cotton curtain into a Dawson coatigan by Thrifty Stitcher.
Early on in lockdown I had the pleasure of talking to Maria Theoharous for her Sew Organised Style podcast on a couple of occasions. I’ve set up a separate page so you can access this to be able to listen to her inspiring SewOver50 guests every week. One of our chats revolved around how we each arrive at our fabric choicesfor specific purposes or projects, I wrote this topic up as a post which you can read here, and I also wrote a further post which came from when I was guest editor on the @SewOver50 account and we talked about our cutting out processes-did we cut and make one thing at a time, or cut several things and have multiple projects on the go? Scissors or rotary cutter? Pins or weights? It was wide ranging and fascinating with so many excellent ideas and practices. I hosted another discussion about a variety of hem finishes later in the year and you can read that one here. Incidentally, by the end of this year @SewOver50 has reached an incredible 25,600 followers!!
One of my stranger tasks this year was to carry out a socially-distanced dress fitting on a doorstep! Before lockdown started I had been commissioned to make a dress for a work colleague of my daughter Katie. Thankfully I’d opted to make a toile of the bodice which I’d fitted just before lockdown kicked off so I managed to get the dress to a good stage of completion. However, I got to a point where I definitely needed her to try it on because even if she couldn’t wear it for the event she had hoped to, it would be nice for her to take delivery and wear it around the house!! So I went to their place of work and handed the dress over at arms length to Tracey to put on in the staff toilet, then she came out onto the porch where Katie, under my direction, pinned the dress for me. I took a few photos for reference too. From that I was able to finish and deliver the dress and my client was delighted with it…phew
One of the regular sewing highlights of the last 4 years for me has been the Sewing Weekender which generally takes place in Cambridge, UK in August. The organisers took the bold decision to put the whole event online instead which meant that many more people could ‘attend’ from all over the world. Myself and Judith Staley were delighted to be asked to contribute a video message each which was very nerve-racking but it turned out alright in the end. I published a transcript of mine here, along with the original video (you’ll notice that I had abandoned my signature pink hair by this time because, quite frankly, what was the point of bothering!) The Online Weekender also raised a significant amount of money which was divided between 4 charities.
As lockdown started to ease in the summer I was able to get out and about a couple of times. I joined an al fresco rag-rugging workshop in Hertfordshire run by Elspeth Jackson of Ragged Life which was so enjoyable, and I visited a couple of exhibitions in London including the Kimono show again, plus Andy Warhol at Tate Modern and Tricia Guild at the Fashion and Textiles museum both on the same day. Since then though things have been shut down then reopened, then shut down again. My heart goes out to everyone who is trying to run a business or an organisation that relies on visitors through their doors to make them viable, their future is very uncertain.
I’ve made a few other garments during the autumn which I’ve been really pleased with including the Prada-inspired shirt dress and a pair of Utility pants by Trend Patterns (not blogged yet) but I feel I’ve run out of steam with my sewing right now and I never thought I’d say that. My own teaching classes restarted for a total of 5 weeks in October but they’ve stopped again. I know some have adapted by using Zoom or other platforms but it just wouldn’t work for me, I feel dressmaking is too hands-on and needs real assistance for tricky bits, holding things up to the camera isn’t good enough sometimes. And being part of a group and all that shared enjoyment is a huge part of it too. I’ve had fairly regular online catch-ups with some of my lovely sewing friends and that has been a joy, albeit not as good as seeing them in the flesh.
Mr Y was the lucky recipient of a few handmade garments too during 2020 when I made him another two Kwik Sew 3422 shirts, and not one but two Thread Theory Finlayson sweatshirts! I’m happy to say he’s delighted with all of them and I’ve got plans for another sweatshirt for him in the new year.
I’m working on my own pattern which I’ve self-drafted so hopefully that will be something positive for the new year but I need occasional assistance from more expert friends and that’s making it a drawn-out process which would have been so much more fun person-to-person.
One final project I was commissioned by a friend to make was a Christmas chasuble for her to wear as she presides over her Christmas services in church. A chasuble is essentially a fancy poncho which the priest wears over their other vestments and Wendy wanted me to create one with a Nativity scene on it. She sourced the base fabric with my advice, and a printed quilting cotton Nativity which was sent from the US. This was square so I carefully cut it into approximate thirds with the central third featuring the stable scene and the star for the front, another third with Bethlehem for the back and the remaining third I cut into two parts to use on the stole, which is the long scarf priests wear around their necks. All of these I attached by appliquéing around the black outlines (I was literally making it up as I went along!) Wendy is delighted with the finished result (thankfully) and I’m sure she will enjoy using them during the Christmas season.
As I finish writing this (2 days before Christmas) we have no idea what lies ahead…some countries seem to be slowly recovering whilst the UK as a whole seems to be sliding further and further into disaster, or maybe not? I should try to think more positively as scientists have worked tirelessly to make a vaccine which will gradually be rolled out. Personally I’m a long way down the list for it but that’s absolutely fine, we must protect the most vulnerable first.
This has probably ended up not being a-not-entirely-coherent post but that’s kind-of appropriate I reckon! Wherever you are and whatever the new year brings for all of us I’d like to thank so many of you for reading my posts, sending me lovely or encouraging messages. Being a part of the online sewing community and Sew Over 50 in particular has been an absolute joy and a lifeline at times. We need to lift each other up more often, call out injustices when we see them but not to the extent that it becomes bullying of individuals, that isn’t right either. 2020 has been a year of huge upheaval, I plan to restart 2021 with fresh sewing plans to help me to feel more positive about it…it’s going to be a bumpy ride!
The Festive season is often a reason to make, or buy, a special new outfit to wear for office parties or Christmas Day but this year’s Festive season things will be very different for most of us. I don’t want to be entirely negative though so, as part of the Lamazi blogger team, I thought I’d make something which is a little bit Christmassy but will double up as a ‘regular’ winter dress too.
I’ve chosen the cord velvetfrom Danish Design in a gorgeous shade of aubergine-I’m always a sucker for purple-but it comes in several other beautiful rich shades including a sumptuous gold and a stunning teal too. I picked this fabric because it’s a medium weight stretch jersey and has soft pile which makes it lovely to the touch. I’ve made a dress but you could easily make tops or wide-legged pants in it, or babies and children’s clothes too because it’s washable and crease resistant.
Whilst I love a complex make to really get my teeth into I felt this wasn’t a garment which warranted lots of time. Making a special Christmas once-worn garment wasn’t appropriate any longer so I wanted something quite simple but adaptable and for that reason I’ve picked the Somerset T-shirt by Maven Patterns. I’ve made a few of these now, the bones of it are beautifully simple, it has a self-neatened bateau neckline, a slightly fitted silhouette and four sleeve options. I’ve chosen the Bishop sleeve with a long cuff but I’ve hacked the sleeve to make it even fuller, and I’ll lengthen the body to create a dress finishing below the knee.
The Somerset has excellent very full instructions with lots of tips and advice to get a good finish. There’s a useful sheet to write all your information including body measurements and fit alterations, and a fabric stretch gauge to check you have enough stretch for the pattern to fit properly. You can also list the needle type and size you’ve used, stitch type and length and anything else you might want to remember for another time.
To increase the size of the sleeves I took the bishop sleeve pattern and drew 5 vertical lines from each of the notches from shoulder to hem. Each segment will become slightly wider as it gets nearer the bottom edge so make sure they are even in size.
Cut a piece of spot and cross or tracing paper bigger than the pattern as it is, mark a grainline running right down the paper and then lay the pattern piece on top of it, matching the grain on the pattern to the grain line you’ve just drawn. Next, I carefully cut up to the top of the marked lines taking care not to snip right through at the top, keep it attached by a tiny amount to act as a pivot point. [If you don’t want to cut your original pattern piece I suggest you trace off a new one to use instead] Then you splay the hem edge apart by a few centimetres each, I added 2.5cms between the each of the ‘side’ segments and 5cms to the central one. By doing this you’re adding fullness at the hem but not altering the sleeve head. You could put additional fullness to the sleeve head by opening the top edge too if you wanted. I lengthened the sleeve by 5cms too so that it would have plenty of blousy fullness into the cuff.
Trace around the new shape using a tracing wheel or pencil and cut out the new piece transferring all markings. One final change I made was to add a bias grainline because I knew I wanted to play with the stripe direction of the rib on the fabric.
I had pre-washed my fabric and partly tumble dried it on ‘low’ before letting it dry completely on the clothes airer, it seemed to survive the experience just fine.
I made an arbitrary choice of how long to make the dress by simply holding the tape measure at my shoulder and seeing where it came to at about mid-shin! I attached another piece of spot and cross to the bottom of the front and back pattern pieces and drew on the skirt length I wanted, plus a generous hem. I knew I would have to make some adjustments to the hip and thigh during the fitting stage, just make sure that the hip and thigh measurements are plenty big enough because you can always remove some, it’s much harder to add later!
The ‘cord’ runs across the width of the fabric and I wanted the rib to run down the length of my dress which meant I had to fold the fabric across the width. Try not to twist the fabric if you have to fold this way, I marked a single rib by following it across the width with pins so that I can see it clearly. Fabrics like corduroy, velvet or velour have a pile or ‘nap’ which will shade so if you cut some pieces facing one way on the grain and some pieces running the other way then you will end up with a garment that looks like it’s been made with two different colour fabrics, even though you know that isn’t the case. If you’re unsure what quantity of this type of fabric to buy go with the ‘with nap’ amount on the pattern information and follow the one-way layplan to cut out.
Once I’d cut all my pieces I followed the making instructions which are very comprehensive. If you have a walking foot for your machine I strongly recommend you use it because velour like this has a ‘pile’ and has a tendency to ‘creep’ as you sew so you might find that it starts off with all the edges matching but by the time you get to the other end the two fabrics are no longer matching. I also strongly recommend you tack any seams you are unsure about. You could use a million pins but by the time you’ve done all that you could have basted it in place which does the same job and usually more effectively. I was able to coverstitch the neck and the skirt hem on the Pfaff Coverlock 3.0 I have on loan as a brand ambassador but it works just as well by overlocking the raw edges and twin-needle stitching them down, or zigzag and twin-needle, or two rows sewn singly if you don’t have a twin needle. When it comes to pressing a fabric like this, if you don’t have a special needle board (and few of us do) then you should press on the reverse at all times. You could place a towel on your pressing surface and lay the fabric on top so that the pile of the cloth is against the pile of the towel which will help protect it. Use a pressing cloth as well. These tips will also apply to regular corduroy or any non-stretch fabrics with a pile too.
The bell of the sleeve is gathered using shirring elastic which helps to retain some of the stretch required for the cuff.
Once the sleeves were in I sewed up one side seam directly on the overlocker and then pinned the other side seam to fit myself. This was because I didn’t know if I’d need a split at the hem to be able to walk in the dress and I didn’t want to end up with loads of unpicking!
I looked at the fit in the mirror first of all and the sewn side seam was quite wavy, this could be cured by either adjusting the differential feed on the overlocker so that it doesn’t happen, or you could stitch the seam on the sewing machine and then overlock the edges [This is what I opted to do because I could see I had to take a fair bit off the side seams anyway to achieve a fit I was happy with] Then I put the dress on inside out in front of the mirror and pinned out the excess. I turned it right side out and tried it on again to check the fit, then finally sewed both side seams on the sewing machine, I used a ‘stretch’ needle, a ballpoint or jersey needle performs the same task. Either use a short straight stitch or a straightened out zigzag, make some samples to see which works best for your particular fabric.
Lastly, the cuffs go on and the skirt is hemmed.
And that’s pretty much it, it pops straight over the head so no tricky closures, because of the stretch it didn’t need a split, and that means there’s room for Christmas lunch and it won’t look like a dish rag after spending the afternoon curled up on the sofa watching Christmas telly!
I have to say that I’m really happy with this dress because it ticks all the boxes I wanted it to. It’s comfortable but it looks Christmassy, it looks great with opaque tights, heels and jewellery, but also with boots, a chunky belt, a roll neck top underneath for extra warmth or a cosy scarf…and did I mention it’s comfortable! #secretpyjamas It also has the advantage of rolling up and going in the corner of a bag or suitcase and coming back out again not needing a press. Bonus!!
At 160cms the fabric is very wide so a little will go a long way, and because it’s so soft it would be lovely for children’s wear too. It needs a little bit of careful handling but a lot of that is in the ground work. Make sure you lay it up and cut it accurately to minimise unnecessary stretching or distortion (try to keep it flat on the table or lay it up on the floor) pin or tack the seams so they don’t move about and press carefully as you go and you should be fine.
It’s been an incredibly tough year for so many and I wouldn’t blame you for not feeling like making anything new to wear. However, if crafting and creating bring you joy and respite then you could view it as a gift to yourself, and when you choose to buy from small companies like Lamazi and Maven then you are helping them too.
Thank you to Lamazi for providing me with the fabric for me to write my review, and I hope you find it helpful.
This whole project all came about because I couldn’t resist some ex-Prada fabric I spotted on my friend Dibs’s website, Selvedge and Bolts! She specialises in sourcing gorgeous quality high-end and ex-designer fabrics from Italy and France. This one caught my eye because funnily enough it doesn’t scream ‘designer’ but I liked the graphic print which stands out amongst so many florals.
I ordered 2 metres although I didn’t have a plan for it, then it occurred to me that I should look at actual Prada designs to see if there were any that were at all wearable by someone like me (ie. not six feet tall or looking about 17 years of age!) Somewhat surprisingly there were some really lovely shirt-dresses in eye-catching fabrics.
This was just the springboard I needed so, after a bit of a search through my patterns, I found this McCalls 7470 which had originally been free with Love Sewing magazine at some point in the recent past. The Princess seam lines and shirt styling were exactly what I wanted except I would change the skirt to be a dropped waist dirndl to echo the original.
The #7470 is a Palmer Pletsch fitting method pattern which I’ve never attempted before. I’ve been thinking lately that many of the garments I’ve made in recents months have either been old favourites or very simple shapes with little use of interesting techniques or style lines. I needed to stretch my sewing muscles a bit more-use them or lose them-so I set about following the instructions to tissue fit the bodice first. By a combination of body measurements, knowing my body quirks, periodically trying on the pinned tissue and using my padded-out dress stand Doris I arrived at a fit that I was happy with.
I’m not going to claim it was particularly easy but there are a lot of written instructions on how to approach it on the accompanying sheets to help you, plus online tutorials too. I’d recommend making a toile (or even two) if you need to before using your fashion fabric to avoid expensive mistakes.
I knew fairly early on that my 2 metres of fabric wouldn’t be enough for what I had in mind, and I didn’t want to waste my lovely Prada fabric so I opted to make the pattern instead in a vibrant printed stretch cotton which I’d bought in Paris at last year’s Sewcial event.
I took my time sewing the dress, I wanted to enjoy each part of the process. There is a two-part collar for example, pleated patch pockets with flaps, and a band running right down the front. I had a few problems with insetting the sleeves though. I’d made a small alteration the back of the arm scye which resulted in it getting a little smaller so I expected there to be a discrepancy but it was much bigger than I anticipated, the sleeve head was far too large and wouldn’t fit without puckering and gathering. I looked at a few examples of #7470 on Instagram and many versions were either sleeveless or didn’t mention it as a problem. Anyway, after a lot of fiddling about in the end I dropped the arm scye down to make it larger so that the sleeve head fitted properly.
The skirt was simply 3 rectangles, two for the front and one for the back which I pleated onto the shirt top using a fork to make each pleat even.
So what started as a Prada-inspired dress for one fabric has still ended up as a Prada-inspired dress but made in a different fabric! I finished the whole thing off with these beautiful buttons from Textile Garden all the way down the front.
So that’s my Prada-inspired dress up to this point, just not made with actual Prada fabric. I have a plan for it though because there was another shirt-dress that caught my eye…
I’m really pleased with the outcome and the way it fits, and because I took my time and didn’t rush, it was an enjoyable process. I’d fallen into the habit of making simple projects, I felt something more complex was needed.
I had made two Simple Sew Cocoon dresses without alteration when the pattern was first released a couple of years back, and you probably know that I love a bit of a pattern hack so I decided that the style would be good for an adaptation. I’d drawn a few sketches of ideas and had a rummage in the stash for some suitable fabric when a funny thing happened…
I found I had already cut out a hacked Cocoon in the past!! I realised I must have done it easily two summers ago but then abandoned it because I decided it would be too short. I remember it was a limited amount of fabric, probably 2 metres, but I put it to one side and forgot about it.
Fast forward to now, I wanted to make it up but I needed to lengthen it in a way I was happy with. I had truncated the bodice at Empire line just below the bust and then the skirt was two widths of the fabric, a simple dirndl. I’d cut the facings too but there was literally nothing else left except small scraps.
I went through various options including adding extra frill layers but to do that you gradually increase the amount of fullness needed for each layer, in other words, layer 1 would be 1.5x the waist measurement, layer 2 could be 2x the length of layer 1, and layer 3 could be 3x the length of layer 2. In simple terms this means longer and longer strips of fabric are needed to form each frill to be sewn to the previous one, and the longer the length of the dress the more layers you might need. Basically I couldn’t make the skirt any longer with what I had because it was already cut, and because of the lockdown I couldn’t go out to look for a suitable plain cotton. I returned to the stash and eventually found 50cms of cotton poplin which I know I bought at the same time as the original, I must have intended it as a contrast but never used it.
By cutting the 50cms piece across the width into two 25cms pieces I could join them at the side seams to form a loop and then fold them in half to create a 12.5cms deep band which I would sew to the hem of the dress! Simple!
Once I’d worked all this out I sewed up the bodice, rather than hemming the cap sleeves I used some binding from my stash so that I could maximise their length. I planned to twin needle some top stitching in various places and I used two different coordinating threads for this.
I did the same around the V neck once the facing was sewn on, in order to get a pristine join at the point I carefully unpicked a couple of stitches and secured them on the reverse.
I wanted side seam pockets (of course) so I had to cut them out of some plain cotton scraps,each piece was added to the side seam and then the side seams sewn up.
The new band was initially slightly wider than the lower edge of the skirt so I restitched it until the two were the same width and matched exactly at both side seams. I used the overlocker with four threads to join and neaten the band in one step, I pressed the seam upwards and then twin-needle topstitched it to decorate.
The final step was to run two rows of gathering stitches at the top of the skirt then sew it onto the bottom of the bodice, matching at the side seams. I pressed this upwards too and topstitched it as well.
For a dress which had languished with not much hope for two years I’m really happy with it!! I loved the fabric (which was from John Lewis originally I think about 4-5 years ago!) and I was so cross I’d cut something which I couldn’t imagine I’d wear if I sewed it up. By adding the deep band the skirt now has weight as well as length. It’s been so comfortable in the hot weather, why did I wait so long?!
Lockdown is easing in the UK since I originally finished this dress but I hope, as always, this hack has given you an idea of how simple it can be to take a section of a pattern you already have and give it a twist to become a different garment. I had very limited fabric with a print which still needed to match everywhere, by adding the hem band I’ve given it the look I was after…it just took a couple of years to think of it!
If you’ve ever read the ‘a bit about me’ page here on the blog you’ll see that in the mid 1980s I worked for a bridal and evening wear company in London called David Fielden. I left the London College of Fashion in the summer of 1985 and started working there on my 23rd birthday. Originally I’d wanted to be a costume designer but during my college course I realised that going into bridal or evening wear was a very good alternative. In those days you just sent letters and CVs out to companies you were interested in working for in the hope that they might like the sound of you and be desperate to add you to their payroll! As it happened my letter was passed to Caroline who was the production manager for David in the evening wear workroom and she had done the same course as me a year earlier so she had a fair idea of what I was potentially capable of.
They took me on and I was going to be cutting samples rather than sewing which initially I was disappointed about. I soon learned that cutting was a huge responsibility in its own right. I was used to making my own clothes with inexpensive fabrics which I bought in my local market or fabric shops, now I was working with fabulous silk taffeta, dupion, Duchesse and slipper satins, velvet, beaded and embellished brocades, even the lining was always silk habutai, it was all a bit dazzling and quite scary to start with! I was provided with a massive pair of shears which soon gave me a callous on my finger joint, I still have a mark there to this day. We had two huge waist-high cutting tables with all the fabrics stored underneath. The pattern cutter would pass me the initial pattern to cut as a toile so that she and the designer could assess the shape and fit on the stand. When they were happy I would be given the pattern along with all the fabrics and instructions for the new sample. It was part of my job to get everything out of the fabric as efficiently and cost-effectively as possible so I always spent time working this out like pattern Tetris before going near it with the scissors! I kept sketches of the layplan for future reference too. No piece was ever cut on a fold, we always used a whole front or a whole back, sleeves, bodice pieces or skirt panels could be ‘flipped’ though to fit them in. The pattern cutter would make the pieces in card from the paper version and I would draw around them in chalk or marking pencil, the pattern pieces would be held down on the fabric with long heavy weights, this means the pattern lasts much much longer than a paper one would. The card patterns would be grouped in style number order onto large hooks a bit like safety pins, each size was on a different hook. Some styles got informal names which is what we identified them by in the workroom, for example there was the ‘Doris Day’ which was a pretty 50s-style gown with silk satin boned bodice and clouds of diamante-studded ankle length tulle skirts, it came in soft pastel colours, and the ‘Carmen Miranda’ which was a longer length figure-hugging silk bodice overlaid with sequin-embellished lace and extravagantly ruffled silk organza mermaid skirts. This was one of the best selling designs and came in a variety of colours including black and scarlet, or could be ordered in other colours and fabric combinations by special order. Just one outworker made this style because she became so skilled at it, every ruffle was edged using a rolled-hem foot and it was then sandwiched between diagonal skirt panels. Oh and there were net petticoats under all of that too! It was very popular for magazine shoots because of it’s ‘film star’ quality and we were regularly squashing dresses unceremoniously into boxes or into dress bags to be couriered on the back of motor bikes to Fleet Street! Some of those poor dresses really suffered and looked quite tired in the end.
Whilst the showroom was in the King’s Road, Chelsea at that time the evening wear workroom was set up across town in Farringdon around the corner from now-trendy Exmouth Market, it was definitely not glamorous and the Woolworth’s pick-n-mix counter was the only interesting eatery back then!!
As well as Caroline, who is still a friend all these years later, there was a designer (David didn’t design, he had no drawing or making skills, he employed others to do it for him) a highly-skilled pattern cutter, a sample machinist and a sample cutter (me) When I wasn’t cutting and costing samples and special orders, Caroline and I would cut production too which was all sewn by out-workers who came in regularly to drop off the garments they had made and to collect the next batch, they were paid an agreed piece rate per garment. Each one was a highly skilled, and fast, machinist who would make the whole garment from start to finish. They all had different capabilities so some would stick to simpler garments like skirts or bodices whilst others made the fantastic evening gowns and ball dresses which David Fielden had become known for. Some of them worked in their own homes and didn’t make a massive quantity of garments, and a couple had set up their own workrooms where they then employed a few extra machinists so they could make larger quantities, we are still only talking about several dozen garments per week though, not hundreds or thousands.
Twice a year the designer, Charlotte, would go with David and his business partner Walter to various fabric shows such as Premier Vision to select beautiful fabrics for the next collection. A lot of the fabrics such as silk taffeta, dupion or Duchesse satins would come from local London suppliers in very quick time, often the same day if the colour was in stock, but the premium fabrics from France or Italy would be ordered in sample lengths ranging from as little as 3 metres up to 10 or 20 metres in the new seasons colours. If those styles then went into production then larger orders would be placed at a later date.
Each new collection was often an evolution of the previous one with a few of the most popular styles being developed in new colours and fabrics, plus some completely new styles. It was always exciting to have the new fabrics starting to arrive from overseas, there were some exquisitely beautiful embellished laces and tulles, occasionally further down the line one or two would prove problematic because the supplier couldn’t produce them quickly enough, or in the quantities required. Each ‘piece’ of lace often came in a 5m length which didn’t go very far. My least favourite fabrics to cut were slipper satin or chiffon, they moved about like the very devil and often it was best to sandwich them between two sheets of spot and cross paper.
I would cut everything for each garment as required and then make a ‘bundle’ including all trims (covered buttons, zip, piping cord etc) and labels. All the cut pieces were folded neatly and layered up and then the whole bundle was carefully folded in several layers of tissue paper and tied up along with identifying sticky labels for the outworker to use when they returned it to us in plastic cover.
Once the new collection was underway Caroline would sew samples as well to speed the process up. Models would come in periodically for fittings and to assess a design on the body. As well as cutting the new samples I also cut one-offs and special orders which could be interesting. For example, we made the gown that Sarah Brightman wore to the party after the world premier of Phantom of the Opera [we memorably made another dress for her to wear for a Gala at the Royal Albert Hall, she had a fitting at the showroom and declared it should be taken in which we duly did at the workroom. It was delivered back to her but with only hours to spare she realised she now couldn’t inflate her lungs to actually sing in it!! Back to the workroom it came to be let out again!] I cut gowns for Daryl Hannah (star of Splash with Tom Hanks) allegedly for the Oscars but I never saw her in it, and I cut a dress for Aretha Franklin too but I never saw that one photographed either. Sadly we never got to meet any of the celebrity clientele, we would just get a set of measurements and fittings would usually take place at the shop. Some stars would borrow gowns for swish parties and premiers so nothing much changes does it? Vogue magazine especially commissioned a version of one dress for a shoot, it was a black taffeta column gown with a wide pale pink sash as I recall. When it returned to the workroom afterwards the hem was water-marked and full of sand! It had been photographed on a beach!!
There were times of stress and all-hands-on-deck but lots of laughs too. I have very positive memories of my 3 years at David Fielden, we were a good team and I learnt so much from my colleagues, they were all brilliant at their jobs with so much experience under their belts already. The company was growing fast during those three years and David took on catwalk shows at London Fashion Week (that was very stressful for everyone because of the workload and short lead times involved!) David and Walter travelled to many overseas shows to exhibit which garnered orders from prestige stores in the US such as Neimann Marcus and Bloomingdales among others, stores in Europe, and Harrods in London. [we could have cried though to see these beautiful dresses being crammed into boxes for despatch]
In the end I left after three years because I got fed up with commuting into London every day, I went to work in the dress fabrics department of our local John Lewis branch so that was more textiles and cloth knowledge to store away in my brain to come in handy another day. I’m sorry the quality of the pictures isn’t great, the cuttings were all torn from magazines and newspapers at the time so they are a little tatty in places.
David Fielden is still in business I believe although the premises have moved to Fulham now, I think they specialise entirely in bridal wear but I’m not sure. The website isn’t particularly up to date but you get an flavour.
This turned into quite a long post (I hope you had a coffee in hand?!) but there’s a few pictures to look at too!! I’ve really enjoyed thinking back to my early working days to tell you all about them and I guess I was very fortunate to work with such a variety of very beautiful fabrics, maybe now you can see why I’m always SO particular about cutting out at the start of any project! So until next time,
Firstly, I probably need to give you a quick explanation of why I’m making a fancy frock during the lockdown because it must seem rather incongruous.
This is my first post as a Lamazi Fabrics blogger and before the Covid-19 pandemic reared it’s ugly head I had offered to make an outfit using a slightly ‘tricky’ fabric in order to share a few hints and tips for sewing with it. I selected the beautiful Tencel/Cupro ‘Bark’ fabric in Lavender because we were going to a wedding in late May which would be the perfect chance to make a something using this special fabric. Very sadly that wedding is now postponed indefinitely but I’m making the dress because I’ll still need something to wear when it’s rescheduled.
The fabric has a lovely weight and handle which makes it drape really well. It’s has a bark-like finish and is different on each side, you could use this to your advantage if you want to create an interesting visual effect by having some pieces with one side out and some using the reverse side.
I made life harder for myself by choosing the new Bias T-shirt Dress by Trend patterns (generously gifted to me by them) in which EVERY piece except the sleeves are singles and strange shapes which means you cut everything out on a single layer of fabric right side up (RSU). Unlike most patterns, when you are cutting pairs of parts you can usually flip a piece without too much difficulty, however if you do that for a piece which must be cut RSU you would have completely reversed the print/design to the wrong side when you try to sew it up. This Tencel/Cupro has a nice look whichever side you use but my advice is to be really careful on printed fabrics before reversing any piece labelled RSU.
Next, when cutting slippery or fluid fabrics (unless you have a lovely big cutting table) you’ll need to handle them as little as possible (by which I mean pulling them about to get them into position) which might be easier said than done. I know that cutting out is most people’s least favourite part of sewing but it’s so important to take time and care at this stage. If you’re cutting out on a table with straight sides use the edges as a visual marker to get the end of your cloth at a right angle to start with, ensure the weft (across the fabric) is nice and straight as well as the warp, pull a few threads to find the grain if necessary. If you have more cloth than will fit on the table in one go you could try having the excess rolled on a cardboard tube if you have one to keep it under control rather than sliding off the table all the time.
Because my pattern has large awkward-shaped pieces cut from a single layer I had no option but to cut out on the floor! This can be physically quite tiring so you might want to get help if you need to. This is slippy slidey fabric so an extra pair of hands could help you lay it up nice and straight, again, rolling the fabric onto a long cardboard tube would also help keep the fabric taut and straight as you lay it out on the floor. This is not a fabric to use weights and a rotary cutter on unless the whole lot fits onto a cutting board without disturbing the fabric, if you’re spending time laying up the fabric carefully so that the grain lines are straight in both (warp and weft) directions you can’t then mess it about shifting a cutting mat underneath it and the pattern pieces need to be secured in place with pins. Cut out carefully moving the pieces as little as possible and try to keep them flat after cutting until you’re ready to sew. All of this will help minimise the pieces stretching out of shape, especially as a lot of this pattern has seams running on a diagonal.
Once I’ve finished cutting out it’s vital to transfer all notches and mark darts and a couple of pivot points so I use old-fashioned tailor’s tacks (obviously you can use a textile marker pen if you prefer, I often do but it’s a pale fabric and I didn’t want to risk any marks being left) It’s a habit of mine to keep all the pattern pieces attached by just a couple of pins to the fabric until I need it, so that I don’t them get muddled. These are curious-shaped pieces so the chance of having them the wrong way round could be quite high! Next I stay-stitched all the neck edges on the machine 5mm in, if you have a very loose weave fabric it would probably be sensible to stay-stitch the bottom edge of the front bodice piece to prevent stretching. If you’re using a particularly fine fabric like chiffon you should stabilise the neck, and any other seams which could stretch, by hand-stitching very narrow cotton tape or ribbon over the seam line on the wrong side of the fabric. When I worked for bridal designer David Fielden many years ago we would cut the selvedges off the silk habutai linings for the seamstresses to use on necklines.
There is just a little fraying on the cut edges which I overlocked singly as I went along, as per the pattern instructions. Whether you’re sewing or overlocking the fabric I strongly suggest you have the whole piece supported on the table in front of the machine rather than feeding up from your lap. This is to prevent the piece becoming stretched as you’re sewing and possibly causing it to become misshapen.
If you find, as I did, that there’s a slight discrepancy between two seams (assuming that it isn’t an error in cutting or adjustment of the pattern) then pin it with the excess on the underside so that when you sew the feed dogs will take up the ease.
My photos should make it clearer, a good press will help steam out some of the excess too. Also, to minimise the risk of making a shiny patch on the fabric make sure you use a pressing cloth, you can often buy silk organza ones although I have a piece of plain fine pure cotton lawn which I’ve overlocked around the edge. I use this when I’m pressing darts or turning points or corners out too.
To sew an invisible zip into the diagonal seam across the back I machined the seam closed but I used a long basting stitch just for the section where the zip will go. This stitching will be removed later.
Once the zip was in and side seams sewn up I checked the fit on myself. I cut a UK 16 and overall I’m happy with the fit and apart from the length I made no alterations to the bodice. Because I made the linen version first I already knew that the shoulders were a bit too broad for me and the sleeves dangled too much off the crown of my arm. I calculated that I needed to remove approximately 3cms to lift them up to a slightly better position. I found I didn’t need to alter the sleeve head though, fortunately it still fitted into the armhole. Another thing I did decide at this point was that the sleeve needed ’something’ else so I mocked up some small pleats and pinned the sleeve into the armhole to try out the effect.
After making the pleats in the sleeves and sewing up the underarm seam I used a ‘pin hem’ to finish the edge. This is similar to a simple rolled hem but even narrower. Begin by stitching a turning of approx 1cm very close to the edge, trim this carefully
I love the 1930s/40s vibe of this dress, the drapey qualities of the fabric enhance the bias lines of the skirt in particular. I really enjoyed the challenge of putting the dress together, there are no particularly difficult techniques as such but it’s an interesting puzzle which you’ll need to spend a little time concentrating on, you’ll be rewarded with a striking but really wearable dress.
Thank you to Trend Patterns for gifting me the pattern, there was no expectation to write a review. You can read my previous review of the Square Dress pattern here. The fabric was provided by Lamazi Fabrics in return for a review which is also published on their own website.
I hope you find some tips and advice in here that might be of use to you if you’re thinking of using a fabric that needs a bit more forward planning than you’re used to. Trend have created another beautiful pattern with stunning and unusual details but the pieces cleverly work with the grain of the fabric so that working with the bias cut is a lot easier than it usually is. They have been gradually increasing their size range too so the TPC26 comes in UK sizes 6-22.
Quite a long blog this time so thank you for reading this far and, until next time,
I hadn’t really planned to write anything about the Kimono:Kyoto to Catwalk exhibition at the V&A because (obviously) I am not an expert and in no way qualified to authoritatively discuss the historic and cultural influences of Japan and the kimono, but then Covid 19 reared its ugly head and now the museum is closed for the foreseeable future, and at the time of writing this we are confined to our homes. Based on this I have decided to put the photos I took into some sort of album so that anyone who had hoped to go to the show can take a look, along with occasional comments based on the information I gleaned from the show and also from a lovely book “Fashioning Kimono” which I was given by a friend recently. I really hope that the current crisis eventually abates to allow this fascinating and lovely exhibition to reopen its doors to the public.
Because I’m a V&A member I had a ticket to a preview day which I nearly didn’t go to but I’m so glad now that I did. The show is set out largely chronologically, visitors are greeted initially by examples of an early nineteenth century kimono alongside a modern example by a Japanese designer and one with Japanese-influence by John Galliano for Christian Dior.
Kimono (meaning ’thing to wear’) is the national dress of Japan and is worn by both men and women. It is a one-piece front-wrapping garment which has changed little for millennia. Traditionally it is made by using the minimum number of cuts from a bolt of fabric around 12 metres long and 40 centimetres wide so that all the fabric is used. Kimono is now more commonly used as a name which covers several styles which, in Japan, would each have their own name to distinguish them, usually by the style of sleeve they have. The fabrics are made from a variety of fibres, most notably silk of course but also cotton or other plant fibres including ramie and hemp.
Moving into the next room there are numerous examples of exquisite historic kimono, alongside pattern books featuring beautiful line drawings of designs which clients could choose from.
A variety of different techniques were used to decorate the kimono including various methods of dyeing such as variations of tie-dye using shibori embroidery, and a form of warp (or weft) printing which, simply put, is when the warp threads are printed before the fabric is then woven. This gives the finished design an attractive fuzzy-edged quality, you may know it as Ikat. [Please excuse my vague descriptions as I didn’t make any written notes.] The red kimono below is a very fine example of kanoko shibori, a labour-intensive, and very expensive, method of tie-dyeing.
The next spectacular garment, which is part of the V&A’s permanent collection, was made for and worn by a concubine who would parade in it for all to see. The quality of the embellishment is mind-boggling, there is masses of gold thread, applique, some of the creatures have ‘whiskers’ and ‘hair’. The shoes are modern reproductions of the sort of elevated footwear these women would have worn, one imagines they had attendants accompanying them to prevent a mishap?!
The exhibition explores the complex relationship between Japan and the West and the influences that had over the fashions of each nation. Once trade routes between Japan and the West started opening up a thirst for the beautiful silk fabrics and kimono-style garments began to develop. From the seventeenth century onwards merchants would take return with these items and they were soon adopted by fashionable high society. Japan responded to this demand by manufacturing textiles and garments specifically for the western export market.
From this point on the exhibition demonstrates the two-way process of influences between Japan and the west. Japan had developed a huge export market of textiles and apparel specifically for the west, and western styles of attire and textile design can be seen entering Japanese design, away from the previous traditional norms.
The final space is the most spectacular simply because of the dazzling array of beautiful garments and the high-ceilinged space they are displayed in.
In conclusion, I hope you enjoyed a brief skip through an exhibition which had so much to offer. It’s visually stunning and has many thoughtful, and helpful, explanations of the links between Japanese and Western fashion and style. I am indebted to the book “Fashioning Kimono” for a few technical explanations which I’ve transcribed in my own words here but I do not seek to go in depth, I hope you understand.
It would be such a pity if more people can’t, eventually, get to see this lovely show but only time will tell how the current world situation works out. I have recently found this YouTube series of short films with the V&A curator guiding you around the show so you might enjoy watching it.