Testing the Regatta dress from Alice & Co

Alice & Co are a pattern company run by the mother-and-daughter team of designer, pattern cutter and sewing teacher Alice, and Lilia, who is a museum textile conservator for her ‘day job’. I saw they were requesting new testers for one of their latest patterns and, as I generally enjoy the process of testing and I’m happy to give my time to assist small indie companies when possible, I was pleased to be invited to help.

The Regatta is a summer dress featuring a neckline which pulls up with ribbon to tie on the shoulders, a gathered or pleated waist, patch pockets and a button-back closure.

I had some printed viscose fabric in my stash which my good friend Claire had given me a few months back and I was sure it would be ideal for this test version of Regatta. I think the dress will be great made in a wide variety of fabrics including chambray, cotton poplin, madras cotton check, seersucker or shirting, as well as eyelet or broderie anglaise, washed linen…I could go on!

This is a PDF pattern but unlike many which provide you with ALL the pattern pieces you might require, because of the simplicity of the skirt it only gives you pieces for front and back bodice plus a patch pocket. It needs a total of 8 pages printed in colour rather a selection of dotted/dashed lines. The skirt is merely three rectangles (front and two backs) so rather than waste paper it gives you guidelines to follow for cutting the skirt pieces ‘freehand’. This isn’t as daunting as it might sound, I used the full width of the fabric cut to my chosen length PLUS a hem and a top seam allowance and then the same again but cut into two equal pieces to form the backs.

The instruction booklet is written in a nice friendly chatty style which feels both informative and encouraging, I think the illustrations are well-drawn and clear too. I printed mine out in booklet format which is a good option if your printer will allow it, 3 pages printed on both sides which fold neatly into A5.

I opted to cut a size 16 according to my measurements from the chart but I would definitely come down at least a size for the next one. As the bodice needs to be lined anyway you could make up the lining as a toile to see if you need to make any adjustments and then use it in the dress. Depending on your fabric you could self-line it or, as I did, use a plain cotton. I also decided at this stage that I would line the skirt because my fabric is a bit sheer, plus it’s a floaty skirt so I don’t want any knicker-revealing moments on windy days!! [I made a simple A-line lining, not the full pleated skirt which would have been awfully bulky]

The bodice construction is simple [if you don’t like darts you won’t be a fan though, you’ll need to make 8!]

Follow the instructions carefully for the ribbon channel openings, the diagrams will help if you’re not sure. Take care inserting the ribbons pieces at the back-cut the ribbon into one long piece for the front and two shorter pieces for the backs. You could possibly use wide elastic for this element instead if you want a different look, or make a self-fabric strip or what about using a vintage scarf even?

Once you’ve joined the outer fabric and linings together along the neck edges and armholes you’ll also need to understitch here as much as possible, to give it a nice crisp edge and stop it rolling. Just go carefully so as not to catch the fabric accidentally-you won’t be able to sew everything because it will be inaccessible in places. 

Next, when you sew the actual channels that the ribbons sit in, it might be wise to tack in position first, certainly mark the lines in some way-chalk, pencil, erasable marker-or if you have a quilting guide attachment for your machine use that. It looks like a piece of bent metal which slots in behind the foot of your machine. You can see it better in the photo although this was a different project. This enables you to follow a stitching line which is considerably further away than your usual seam allowance markings on the needle plate will allow. You’ll need to be most careful sewing the back channels because the ribbon is already in position so don’t sew through it by accident, it won’t gather up. Slot the ribbon through the front when you’ve sewn the front channel, or leave it until you’re ready to try the dress on and adjust the bows to your taste at the end.

using the quilting guide attachment to follow a wider width [this was on the Heron dress]

Making up the skirt is simple enough, don’t forget to interface the button-stand areas for stability. The pockets are positioned over the side seams but they could go directly on the front if you prefer.

I opted to use pleats on the skirt because I prefer how they look on me to gathers. I don’t have any sage advice or foolproof mathematical equation for working this out I’m afraid, I just pinned the skirt to the bodice at the side seams, CF and CB button-stand and then fiddled until I was happy with the pleats before stitching it on. There were lots of pins involved!  

lots of pins holding the pleats in position ready to sew.

If you aren’t lining the skirt then you can simply slip stitch the lining in place by hand as per the instructions. As I was lining the skirt too I cut, sewed and hemmed a simple A-line shape in plain cotton which I stitched to the bottom of the bodice lining, obviously it must have the gap at the back for the button opening. I simply caught this down behind the button-stand with a few hand stitches so it doesn’t flap about. So that it doesn’t ride up inside the dress I hand-sewed a few stitches at the side seams and CF where the seams meet to anchor them together loosely.

The lining looks like this inside, it doesn’t need to be the full length of the skirt although it could be if you want.

I used a nice deep hem of 5cms to give the skirt weight. I overlocked the edge and then used the blindhem stitch and foot to sew it up. As the hem is straight you could face it instead with bias binding or ribbon, or a contrast fabric for a different look, either machine top stitch or slip-hem in place by hand. The photos show the blindhem for my machine but most machine manuals will show you how to sew this-definitely practice to get it right as there is a knack to it.

• 

• 

• 

I used 4 buttons on the bodice section and then 6 buttons on the skirt, evenly spaced so that there’s still a nice ‘split’ at the bottom. I have a ‘thing’ about button opening on skirts where the bottom button is too close to the hem, don’t ask me why, I just don’t find it aesthetically pleasing. For a novel detail I used red and blue thread to sew on the bodice buttons and ivory on the skirt. I also added a small hook and eye at the waist seam to take any strain off the button at this point. 

All that remains is to pop your dress on and pull up the ribbons to your desired amount and tie in a bow, trim the ends into neat Vs to stop them fraying. Once you’ve adjusted the gathers to your liking then pin and stitch in a few places as per the instructions to hold them in place evenly.  

I used green Grosgrain ribbon as a contrast to the otherwise nautical colours of my Regatta dress.

I just need to find a nice wide belt to finish it off I think although it works perfectly well without. My Regatta dress has already had two wears since I finished it and it’s quirky details make it stand out. It isn’t an ultra-quick make compared to some styles but it’s worth the effort and makes a charming and feminine summer dress. It would even work in more ’special’ type fabrics too, like panne velvet, Chantilly lace or crepe de chine for an evening or party dress.

Once again it’s been an interesting process to help test a pattern and Alice & Co were quick to respond to queries. Another reason I was keen to assist is because as a brand they are very supportive of the Sew Over 50 cause by reposting images shared by older makers using their patterns, and have generously provided prizes in our previous challenges.

So while the sun is out here in the UK this could be a nice addition to your summer/holiday wardrobe.

Until next time,

Happy sewing

Sue