The Frilled Hem Top from Trend Patterns

Trend are fashion-forward indie pattern company based in London and I’ve already used their Asymmetric Dress pattern twice (and reviewed it here) I even wore the first one for the Love Sewing magazine Sew Over 50 photo shoot too because I felt it was such a striking but wearable dress that it deserved to be seen in a national sewing publication!

• 

• 

• 

• 

I made this version in brocade for our cruise to celebrate our 30th wedding anniversary in March…

…and it has a pocket!

The next Trend pattern I’ve decided to tackle is the Frilled Hem Top TPC5 and it’s another goody as far as I’m concerned. As well as the ruffle detail it features some interesting diagonal seam lines (there’s no side seam) The degree of difficulty is described as moderate and I’d agree with that because although the techniques used aren’t difficult you need to keep your wits about you to ensure that you’re attaching the pieces to the right seams, it could be easy to lose sight of which way up they are because the usual ‘landmarks’ like armholes or necklines aren’t so obvious. There are photographs as well as written instructions, which are fairly clear, at the end of the day it’s a simple top and so long as the ruffle goes in first attached to the right pieces then adding the back yoke and sleeves is straightforward. I hadn’t got a suitable zip, I’d thought about using an exposed metal zip but the one I had in my stash was too chunky for the weight of the fabric so I opted for a simple button and hand sewn loop closure instead.

• 

• 

My fabric was a very thin cotton I’d picked up from a swap sometime ago-I couldn’t really say what it is as it isn’t soft like lawn, or sheer like voile, it’s slightly more crisp like poplin but less weighty. Whatever, it’s worked just fine for this and it didn’t cost me anything!

As I was making the top at this year’s Stitchroom Sewcial I was fortunate to be able to use the industrial rolled hem machine to finish the edge of the ruffle, it’s super-quick and neat and took me about 30 seconds to hem the whole piece instead of my usual pin-hem finish which would take at least half an hour!

As I didn’t have much fabric, plus I wanted to wear it as a summer top, I cut the sleeves down to short length. I was a little concerned that they looked like they may be a bit snug on my not-very-slim arms, the bicep measurement seemed to be ok but the crown looked narrow. I decided to go ahead and insert the sleeves and actually they are just fine as you can see from the photos. As there is no underarm seam to match the sleeve to it’s vital that the shoulder/sleeve head notches are marked or you’ll struggle to insert them properly. I’ve made a straight-from-the-packet size 14 again and the fit is spot on for me with no alterations, it’s a good fit across the shoulders and upper chest area and then flares out over the hips.

There are two points in the instructions which are useful and important to follow. The first is very simple, it tells you to ’sink stitch’ (that’s what it always was until ’stitch in the ditch’ became a thing) through the shoulder seams to hold the neck facings securely in position, this is both quicker and more effective than hand stitching them down I always think. The second point is that you can’t sew the whole hem up all in one go, you’ll need to sew the centre front section, stop, move the frill out of the way and then recommence the rest of the hem. If you don’t you’ll just sew over the frill which will look terrible.

You’ll need to sew the hem between the frills separately to the rest of the hem, moving the frill out of the way.

I finished off the neckline with a button and loop.

I love this detail where the frill, the back and the side all meet.

So that’s the Frilled Hem Top, it should probably take around half to a whole day to make, it took me longer because I was nattering at the Sewcial quite a lot, and then I made a super-quick Mandy Boat T-shirt using the industrial coverlock machines in between too.

This was my other Sewcial make, the Mandy Boat Tee which is a free pattern from Tessuti. I’ve made it in a gorgeous jersey form Lamazi Fabrics which I’ve learnt was recently discontinued.

If you’re interested in the jeans they are Megan Nielsen Ash which I tested nearly two years ago and I LOVE wearing.

The TPC5 takes a little under 2 metres of fabric, probably less if you’re making it sleeveless or short sleeves. The size range isn’t extensive, 6-16 UK sizes, and they aren’t the cheapest but I’ve been very happy with the two I have and I’ll definitely make some more variations of this particular pattern. You could create some really interesting looks by using contrasting fabrics or colours, or leave out the frill completely to show off the unusual seam lines?

Trend have a wide range of patterns now, which don’t necessarily appeal to everyone but I think they are well worth a look at because of their unusual styling and details. They may look scarily fashion-forward but if you want something which is less predictable and run-of-the-mill in a sea of ‘meh’ patterns then, in my unsolicited opinion, they are a good bet. They often have a flash discount offer too so keep your eyes peeled for them!

Until next time, Happy Sewing

Sue