Two years ago I did a 10 week tailoring course at Morley College, London but it’s taken me until now to actually make my own coat. I settled on Butterick 6423 partly because it’s a fairly similar silhouette to a RTW coat I already own and wear a lot, and then, ironically, it came free with Love Sewing magazine just before Christmas.
Added to this I had 3 metres of lovely turquoise-coloured wool in my stash that was gifted to me about a year ago by a friend who was clearing out her mother’s belongings and wanted the fabrics and patterns (LOTS of them) to go to an appreciative home. Not only that, I had just under 2 metres of almost psychedelic lining fabric which came from a different elderly lady ( I had no idea what to do with it at the time but, as is often the way, it goes really well with this wool)
Because I had plenty of fabric, which makes a change for me as I tend to underestimate, I could cut out the coat without having to watch every centimetre. I didn’t have quite enough lining though so I cut all the pieces which would be visible inside the main body and the sleeve linings I cut from plain lining, again from my stash.
Initially, before I cut the fabric, I pinned the tissue together to check it on my dress-stand. I chose to take 3cms out of the overall body length and 4cms out of the sleeves because they seemed terribly long. This proved to be sensible as you’ll see in the finished garment.
I found the instructions very clear to follow and I don’t think at any time did I get in a muddle although I do think a common problem with the ‘big’ pattern companies is that the diagrams can be very small making it difficult to see exactly what you should be doing, particularly areas like clipping into important corners eg at the collar/shoulder seam.
Because I do a lot of alterations for people I’ve noticed various techniques employed in the construction of RTW garments. Cuffs, for example, are usually stabilised with iron-on interfacing of some kind so that’s what I did here.
By doing this it stops the cuff from stretching (my fabric is fairly loosely woven too) and gives it firmness and stability. I bought my iron-on interfacing in Goldhawk Rd, London so I can’t really give much detail about it except to say I was told it’s suitable for woollens and tailoring with a light jersey backing. I used it on the collar facing too and it seems to be absolutely fine. You could use a firmer one if you wish, that would make the collar firmer than mine.
There are a few places where you’re told to hand sew hand, attaching the sleeve lining to the inside of the cuffs for example, but if you’re not a fan of hand sewing it is possible to do this by machine, you just need to get them pinned correctly (double-check you’ve got it right first by turning the sleeve right-side out before you sew it)
It’s also worth attaching a small amount of the sleeve-lining seam to the sleeve seam inside, this stops any chance of the lining sliding out of the end of the sleeve.
You can do this on the machine, or a few running stitches will do the job.
Making the back pleat needs a bit of concentration partly because the lining gets stitched together with it-this makes sense because it reduces the bulk if you’d done them each separately. I opted to partly stitch the pleat together for about 10cms down from the top simply so that it didn’t have a chance to be to flappy in wear.
Once the pleat section is sewn on the instructions say to slip-stitch the lining down. Again, it’s possible to do this on the machine, you need to work your way into the right place by going in through the gap at the front between the facing and the coat front.
I sewed the coat hem up using herringbone stitch because I think it holds a hem nice and firmly. You sew this stitch from left to right, looping each stitch backwards from the previous one, one above then one below.
Throughout the making process I pressed often and used plenty of steam, with a pressing cloth to prevent shine. If you’re using pure wool you can press and re-press because it’s very forgiving although be more careful if you’re using a fabric that isn’t well or is made with mixed fibres. As my tutor on the tailoring course often said, “steam is your friend” A tailor’s ham is a great boon too because it will enable you to press in tricky areas or under curves seams, for example.
The lining hem was just turned and machined. To neaten the bottom of the front facing I applied a little bit of self-made bias binding, it’s looks nice and it doesn’t add the bulk that turning the edge over could do.
I also added 2 small loops of fabric to hold the lining and the coat together at the side seams, again this stops it flapping about in wear.
I added a hanging loop at the neck which I should have sewn on by machine at an earlier stage but I forgot so I had to sew it on by hand at the end.
The last thing to do is the single buttonhole. I had a rummage for a suitable button first and I came up with a single beautiful mother-of-pearl one which I’d bought a couple of years ago, simply because it’s lovely! I paid £1 for it and I’ve actually left the tiny price label on the back, just because…
I created a surround of tacking stitches to hold the area firm and stable before sewing the buttonhole. I did several trial ones first because my Pfaff is so new to me and I didn’t want to mess it up at this late stage. Unfortunately the thread I’d used for the whole garment was clearly too dark in such a prominent position so I had to go and buy a single reel of thread just for the buttonhole! When I sewed the button on I sewed another small button on behind it so that the fabric doesn’t have to take all the strain of a button being done up and undone constantly.
This is a coat with a slightly retro aesthetic, it’s a little bit 50’s, the back is a little bit 20’s. The result though is modern and wearable and I’m really happy with it.
I love the fun lining inside too. The wool fabric isn’t that thick though so I don’t think I’ll be wearing it when it’s very cold although there is room for a jumper underneath.
As you will have noticed it’s a difficult colour to photograph accurately, the outdoor ones are probably the closest to the real shade.
It’s been an enjoyable process, I took my time over it and I’m very happy with the result. It would be a good project to try if you’re becoming a bit more experienced with your sewing, nothing is terribly tricky, buy suitable but not too expensive fabric and take your time! I’m glad I took some of the length out of the body and sleeves as they would have been very long. I made the size medium and it was plenty big enough, I think the sizing is definitely on the generous-side though so don’t be tempted to go up a size, make a toile if you need to or tissue fit if you can. I didn’t bother neatening any of the seams inside because all of them were going to be enclosed but you could choose to leave the coat unlined and then bind all the seams (Hong Kong finish) which is practical and attractive.
…and the coat cost me barely anything at all!
Because it was the free pattern with Love Sewing I expect there will be lots of versions of this coat popping up over the winter so it will be fun to see how they all vary. Have you made this pattern, I’d love to know how you got on?